//=============================================================================
// Folding the code
static void FoldNoBoxVHDLDoc(
unsigned int startPos,
int length,
int,
Accessor &styler)
{
// Decided it would be smarter to have the lexer have all keywords included. Therefore I
// don't check if the style for the keywords that I use to adjust the levels.
char words[] =
"architecture begin case component else elsif end entity generate loop package process record then "
"procedure function when";
WordList keywords;
keywords.Set(words);
bool foldComment = styler.GetPropertyInt("fold.comment", 1) != 0;
bool foldCompact = styler.GetPropertyInt("fold.compact", 1) != 0;
bool foldAtElse = styler.GetPropertyInt("fold.at.else", 1) != 0;
bool foldAtBegin = styler.GetPropertyInt("fold.at.Begin", 1) != 0;
bool foldAtParenthese = styler.GetPropertyInt("fold.at.Parenthese", 1) != 0;
//bool foldAtWhen = styler.GetPropertyInt("fold.at.When", 1) != 0; //< fold at when in case statements
int visibleChars = 0;
unsigned int endPos = startPos + length;
int lineCurrent = styler.GetLine(startPos);
int levelCurrent = SC_FOLDLEVELBASE;
if(lineCurrent > 0)
levelCurrent = styler.LevelAt(lineCurrent-1) >> 16;
//int levelMinCurrent = levelCurrent;
int levelMinCurrentElse = levelCurrent; //< Used for folding at 'else'
int levelMinCurrentBegin = levelCurrent; //< Used for folding at 'begin'
int levelNext = levelCurrent;
/***************************************/
int lastStart = 0;
char prevWord[32] = "";
/***************************************/
// Find prev word
// The logic for going up or down a level depends on a the previous keyword
// This code could be cleaned up.
int end = 0;
unsigned int j;
for(j = startPos; j>0; j--)
{
char ch = styler.SafeGetCharAt(j);
char chPrev = styler.SafeGetCharAt(j-1);
int style = styler.StyleAt(j);
int stylePrev = styler.StyleAt(j-1);
if ((stylePrev != SCE_VHDL_COMMENT) && (stylePrev != SCE_VHDL_STRING))
{
if(IsAWordChar(chPrev) && !IsAWordChar(ch))
{
end = j-1;
}
}
if ((style != SCE_VHDL_COMMENT) && (style != SCE_VHDL_STRING))
{
if(!IsAWordChar(chPrev) && IsAWordStart(ch) && (end != 0))
{
char s[32];
unsigned int k;
for(k=0; (k<31 ) && (k<end-j+1 ); k++) {
s[k] = static_cast<char>(tolower(styler[j+k]));
}
s[k] = '\0';
if(keywords.InList(s)) {
strcpy(prevWord, s);
break;
}
}
}
}
for(j=j+static_cast<unsigned int>(strlen(prevWord)); j<endPos; j++)
{
char ch = styler.SafeGetCharAt(j);
int style = styler.StyleAt(j);
if ((style != SCE_VHDL_COMMENT) && (style != SCE_VHDL_STRING))
{
if((ch == ';') && (strcmp(prevWord, "end") == 0))
{
strcpy(prevWord, ";");
}
}
}
char chNext = styler[startPos];
char chPrev = '\0';
char chNextNonBlank;
int styleNext = styler.StyleAt(startPos);
//Platform::DebugPrintf("Line[%04d] Prev[%20s] ************************* Level[%x]\n", lineCurrent+1, prevWord, levelCurrent);
/***************************************/
for (unsigned int i = startPos; i < endPos; i++)
{
char ch = chNext;
chNext = styler.SafeGetCharAt(i + 1);
chPrev = styler.SafeGetCharAt(i - 1);
chNextNonBlank = chNext;
unsigned int j = i+1;
while(IsABlank(chNextNonBlank) && j<endPos)
{
j ++ ;
chNextNonBlank = styler.SafeGetCharAt(j);
}
int style = styleNext;
styleNext = styler.StyleAt(i + 1);
bool atEOL = (ch == '\r' && chNext != '\n') || (ch == '\n');
if (foldComment && atEOL && IsCommentLine(lineCurrent, styler))
{
if(!IsCommentLine(lineCurrent-1, styler) && IsCommentLine(lineCurrent+1, styler))
{
levelNext++;
}
else if(IsCommentLine(lineCurrent-1, styler) && !IsCommentLine(lineCurrent+1, styler))
{
levelNext--;
}
}
if ((style == SCE_VHDL_OPERATOR) && foldAtParenthese)
{
if(ch == '(') {
levelNext++;
} else if (ch == ')') {
levelNext--;
}
}
if ((style != SCE_VHDL_COMMENT) && (style != SCE_VHDL_STRING))
{
if((ch == ';') && (strcmp(prevWord, "end") == 0))
{
strcpy(prevWord, ";");
}
if(!IsAWordChar(chPrev) && IsAWordStart(ch))
{
lastStart = i;
}
if(iswordchar(ch) && !iswordchar(chNext)) {
char s[32];
unsigned int k;
for(k=0; (k<31 ) && (k<i-lastStart+1 ); k++) {
s[k] = static_cast<char>(tolower(styler[lastStart+k]));
}
s[k] = '\0';
if(keywords.InList(s))
{
if (
strcmp(s, "architecture") == 0 ||
strcmp(s, "case") == 0 ||
strcmp(s, "component") == 0 ||
strcmp(s, "entity") == 0 ||
strcmp(s, "generate") == 0 ||
strcmp(s, "loop") == 0 ||
strcmp(s, "package") ==0 ||
strcmp(s, "process") == 0 ||
strcmp(s, "record") == 0 ||
strcmp(s, "then") == 0)
{
if (strcmp(prevWord, "end") != 0)
{
if (levelMinCurrentElse > levelNext) {
levelMinCurrentElse = levelNext;
}
levelNext++;
}
} else if (
strcmp(s, "procedure") == 0 ||
strcmp(s, "function") == 0)
{
if (strcmp(prevWord, "end") != 0) // check for "end procedure" etc.
{ // This code checks to see if the procedure / function is a definition within a "package"
// rather than the actual code in the body.
int BracketLevel = 0;
for(int j=i+1; j<styler.Length(); j++)
{
int LocalStyle = styler.StyleAt(j);
char LocalCh = styler.SafeGetCharAt(j);
if(LocalCh == '(') BracketLevel++;
if(LocalCh == ')') BracketLevel--;
if(
(BracketLevel == 0) &&
(LocalStyle != SCE_VHDL_COMMENT) &&
(LocalStyle != SCE_VHDL_STRING) &&
!iswordchar(styler.SafeGetCharAt(j-1)) &&
styler.Match(j, "is") &&
!iswordchar(styler.SafeGetCharAt(j+2)))
{
if (levelMinCurrentElse > levelNext) {
levelMinCurrentElse = levelNext;
}
levelNext++;
break;
}
if((BracketLevel == 0) && (LocalCh == ';'))
{
break;
}
}
}
} else if (strcmp(s, "end") == 0) {
levelNext--;
} else if(strcmp(s, "elsif") == 0) { // elsif is followed by then so folding occurs correctly
levelNext--;
} else if (strcmp(s, "else") == 0) {
if(strcmp(prevWord, "when") != 0) // ignore a <= x when y else z;
{
levelMinCurrentElse = levelNext - 1; // VHDL else is all on its own so just dec. the min level
}
} else if(
((strcmp(s, "begin") == 0) && (strcmp(prevWord, "architecture") == 0)) ||
((strcmp(s, "begin") == 0) && (strcmp(prevWord, "function") == 0)) ||
((strcmp(s, "begin") == 0) && (strcmp(prevWord, "procedure") == 0)))
{
levelMinCurrentBegin = levelNext - 1;
}
//Platform::DebugPrintf("Line[%04d] Prev[%20s] Cur[%20s] Level[%x]\n", lineCurrent+1, prevWord, s, levelCurrent);
strcpy(prevWord, s);
}
}
}
if (atEOL) {
int levelUse = levelCurrent;
if (foldAtElse && (levelMinCurrentElse < levelUse)) {
levelUse = levelMinCurrentElse;
}
if (foldAtBegin && (levelMinCurrentBegin < levelUse)) {
levelUse = levelMinCurrentBegin;
}
int lev = levelUse | levelNext << 16;
if (visibleChars == 0 && foldCompact)
lev |= SC_FOLDLEVELWHITEFLAG;
if (levelUse < levelNext)
lev |= SC_FOLDLEVELHEADERFLAG;
if (lev != styler.LevelAt(lineCurrent)) {
styler.SetLevel(lineCurrent, lev);
}
//Platform::DebugPrintf("Line[%04d] ---------------------------------------------------- Level[%x]\n", lineCurrent+1, levelCurrent);
lineCurrent++;
levelCurrent = levelNext;
//levelMinCurrent = levelCurrent;
levelMinCurrentElse = levelCurrent;
levelMinCurrentBegin = levelCurrent;
visibleChars = 0;
}
/***************************************/
if (!isspacechar(ch)) visibleChars++;
}
/***************************************/
// Platform::DebugPrintf("Line[%04d] ---------------------------------------------------- Level[%x]\n", lineCurrent+1, levelCurrent);
}
static void ColouriseBashDoc(Sci_PositionU startPos, Sci_Position length, int initStyle,
WordList *keywordlists[], Accessor &styler) {
WordList &keywords = *keywordlists[0];
WordList cmdDelimiter, bashStruct, bashStruct_in;
cmdDelimiter.Set("| || |& & && ; ;; ( ) { }");
bashStruct.Set("if elif fi while until else then do done esac eval");
bashStruct_in.Set("for case select");
CharacterSet setWordStart(CharacterSet::setAlpha, "_");
// note that [+-] are often parts of identifiers in shell scripts
CharacterSet setWord(CharacterSet::setAlphaNum, "._+-");
CharacterSet setMetaCharacter(CharacterSet::setNone, "|&;()<> \t\r\n");
setMetaCharacter.Add(0);
CharacterSet setBashOperator(CharacterSet::setNone, "^&%()-+=|{}[]:;>,*/<?!.~@");
CharacterSet setSingleCharOp(CharacterSet::setNone, "rwxoRWXOezsfdlpSbctugkTBMACahGLNn");
CharacterSet setParam(CharacterSet::setAlphaNum, "$_");
CharacterSet setHereDoc(CharacterSet::setAlpha, "_\\-+!%*,./:?@[]^`{}~");
CharacterSet setHereDoc2(CharacterSet::setAlphaNum, "_-+!%*,./:=?@[]^`{}~");
CharacterSet setLeftShift(CharacterSet::setDigits, "$");
class HereDocCls { // Class to manage HERE document elements
public:
int State; // 0: '<<' encountered
// 1: collect the delimiter
// 2: here doc text (lines after the delimiter)
int Quote; // the char after '<<'
bool Quoted; // true if Quote in ('\'','"','`')
bool Indent; // indented delimiter (for <<-)
int DelimiterLength; // strlen(Delimiter)
char Delimiter[HERE_DELIM_MAX]; // the Delimiter
HereDocCls() {
State = 0;
Quote = 0;
Quoted = false;
Indent = 0;
DelimiterLength = 0;
Delimiter[0] = '\0';
}
void Append(int ch) {
Delimiter[DelimiterLength++] = static_cast<char>(ch);
Delimiter[DelimiterLength] = '\0';
}
~HereDocCls() {
}
};
HereDocCls HereDoc;
class QuoteCls { // Class to manage quote pairs (simplified vs LexPerl)
public:
int Count;
int Up, Down;
QuoteCls() {
Count = 0;
Up = '\0';
Down = '\0';
}
void Open(int u) {
Count++;
Up = u;
Down = opposite(Up);
}
void Start(int u) {
Count = 0;
Open(u);
}
};
QuoteCls Quote;
class QuoteStackCls { // Class to manage quote pairs that nest
public:
int Count;
int Up, Down;
int Style;
int Depth; // levels pushed
int CountStack[BASH_DELIM_STACK_MAX];
int UpStack [BASH_DELIM_STACK_MAX];
int StyleStack[BASH_DELIM_STACK_MAX];
QuoteStackCls() {
Count = 0;
Up = '\0';
Down = '\0';
Style = 0;
Depth = 0;
}
void Start(int u, int s) {
Count = 1;
Up = u;
Down = opposite(Up);
Style = s;
}
void Push(int u, int s) {
if (Depth >= BASH_DELIM_STACK_MAX)
return;
CountStack[Depth] = Count;
UpStack [Depth] = Up;
StyleStack[Depth] = Style;
Depth++;
Count = 1;
Up = u;
Down = opposite(Up);
Style = s;
}
void Pop(void) {
if (Depth <= 0)
return;
Depth--;
Count = CountStack[Depth];
Up = UpStack [Depth];
Style = StyleStack[Depth];
Down = opposite(Up);
}
~QuoteStackCls() {
}
};
QuoteStackCls QuoteStack;
int numBase = 0;
int digit;
Sci_PositionU endPos = startPos + length;
int cmdState = BASH_CMD_START;
int testExprType = 0;
// Always backtracks to the start of a line that is not a continuation
// of the previous line (i.e. start of a bash command segment)
Sci_Position ln = styler.GetLine(startPos);
if (ln > 0 && startPos == static_cast<Sci_PositionU>(styler.LineStart(ln)))
ln--;
for (;;) {
startPos = styler.LineStart(ln);
if (ln == 0 || styler.GetLineState(ln) == BASH_CMD_START)
break;
ln--;
}
initStyle = SCE_SH_DEFAULT;
StyleContext sc(startPos, endPos - startPos, initStyle, styler);
for (; sc.More(); sc.Forward()) {
// handle line continuation, updates per-line stored state
if (sc.atLineStart) {
ln = styler.GetLine(sc.currentPos);
if (sc.state == SCE_SH_STRING
|| sc.state == SCE_SH_BACKTICKS
|| sc.state == SCE_SH_CHARACTER
|| sc.state == SCE_SH_HERE_Q
|| sc.state == SCE_SH_COMMENTLINE
|| sc.state == SCE_SH_PARAM) {
// force backtrack while retaining cmdState
styler.SetLineState(ln, BASH_CMD_BODY);
} else {
if (ln > 0) {
if ((sc.GetRelative(-3) == '\\' && sc.GetRelative(-2) == '\r' && sc.chPrev == '\n')
|| sc.GetRelative(-2) == '\\') { // handle '\' line continuation
// retain last line's state
} else
cmdState = BASH_CMD_START;
}
styler.SetLineState(ln, cmdState);
}
}
// controls change of cmdState at the end of a non-whitespace element
// states BODY|TEST|ARITH persist until the end of a command segment
// state WORD persist, but ends with 'in' or 'do' construct keywords
int cmdStateNew = BASH_CMD_BODY;
if (cmdState == BASH_CMD_TEST || cmdState == BASH_CMD_ARITH || cmdState == BASH_CMD_WORD)
cmdStateNew = cmdState;
int stylePrev = sc.state;
// Determine if the current state should terminate.
switch (sc.state) {
case SCE_SH_OPERATOR:
sc.SetState(SCE_SH_DEFAULT);
if (cmdState == BASH_CMD_DELIM) // if command delimiter, start new command
cmdStateNew = BASH_CMD_START;
else if (sc.chPrev == '\\') // propagate command state if line continued
cmdStateNew = cmdState;
break;
case SCE_SH_WORD:
// "." never used in Bash variable names but used in file names
if (!setWord.Contains(sc.ch)) {
char s[500];
char s2[10];
sc.GetCurrent(s, sizeof(s));
// allow keywords ending in a whitespace or command delimiter
s2[0] = static_cast<char>(sc.ch);
s2[1] = '\0';
bool keywordEnds = IsASpace(sc.ch) || cmdDelimiter.InList(s2);
// 'in' or 'do' may be construct keywords
if (cmdState == BASH_CMD_WORD) {
if (strcmp(s, "in") == 0 && keywordEnds)
cmdStateNew = BASH_CMD_BODY;
else if (strcmp(s, "do") == 0 && keywordEnds)
cmdStateNew = BASH_CMD_START;
else
sc.ChangeState(SCE_SH_IDENTIFIER);
sc.SetState(SCE_SH_DEFAULT);
break;
}
// a 'test' keyword starts a test expression
if (strcmp(s, "test") == 0) {
if (cmdState == BASH_CMD_START && keywordEnds) {
cmdStateNew = BASH_CMD_TEST;
testExprType = 0;
} else
sc.ChangeState(SCE_SH_IDENTIFIER);
}
// detect bash construct keywords
else if (bashStruct.InList(s)) {
if (cmdState == BASH_CMD_START && keywordEnds)
cmdStateNew = BASH_CMD_START;
else
sc.ChangeState(SCE_SH_IDENTIFIER);
}
// 'for'|'case'|'select' needs 'in'|'do' to be highlighted later
else if (bashStruct_in.InList(s)) {
if (cmdState == BASH_CMD_START && keywordEnds)
cmdStateNew = BASH_CMD_WORD;
else
sc.ChangeState(SCE_SH_IDENTIFIER);
}
// disambiguate option items and file test operators
else if (s[0] == '-') {
if (cmdState != BASH_CMD_TEST)
sc.ChangeState(SCE_SH_IDENTIFIER);
}
// disambiguate keywords and identifiers
else if (cmdState != BASH_CMD_START
|| !(keywords.InList(s) && keywordEnds)) {
sc.ChangeState(SCE_SH_IDENTIFIER);
}
sc.SetState(SCE_SH_DEFAULT);
}
break;
case SCE_SH_IDENTIFIER:
if (sc.chPrev == '\\') { // for escaped chars
sc.ForwardSetState(SCE_SH_DEFAULT);
} else if (!setWord.Contains(sc.ch)) {
sc.SetState(SCE_SH_DEFAULT);
} else if (cmdState == BASH_CMD_ARITH && !setWordStart.Contains(sc.ch)) {
sc.SetState(SCE_SH_DEFAULT);
}
break;
case SCE_SH_NUMBER:
digit = translateBashDigit(sc.ch);
if (numBase == BASH_BASE_DECIMAL) {
if (sc.ch == '#') {
char s[10];
sc.GetCurrent(s, sizeof(s));
numBase = getBashNumberBase(s);
if (numBase != BASH_BASE_ERROR)
break;
} else if (IsADigit(sc.ch))
break;
} else if (numBase == BASH_BASE_HEX) {
if (IsADigit(sc.ch, 16))
break;
#ifdef PEDANTIC_OCTAL
} else if (numBase == BASH_BASE_OCTAL ||
numBase == BASH_BASE_OCTAL_ERROR) {
if (digit <= 7)
break;
if (digit <= 9) {
numBase = BASH_BASE_OCTAL_ERROR;
break;
}
#endif
} else if (numBase == BASH_BASE_ERROR) {
if (digit <= 9)
break;
} else { // DD#DDDD number style handling
if (digit != BASH_BASE_ERROR) {
if (numBase <= 36) {
// case-insensitive if base<=36
if (digit >= 36) digit -= 26;
}
if (digit < numBase)
break;
if (digit <= 9) {
numBase = BASH_BASE_ERROR;
break;
}
}
}
// fallthrough when number is at an end or error
if (numBase == BASH_BASE_ERROR
#ifdef PEDANTIC_OCTAL
|| numBase == BASH_BASE_OCTAL_ERROR
#endif
) {
sc.ChangeState(SCE_SH_ERROR);
}
sc.SetState(SCE_SH_DEFAULT);
break;
case SCE_SH_COMMENTLINE:
if (sc.atLineEnd && sc.chPrev != '\\') {
sc.SetState(SCE_SH_DEFAULT);
}
break;
case SCE_SH_HERE_DELIM:
// From Bash info:
// ---------------
// Specifier format is: <<[-]WORD
// Optional '-' is for removal of leading tabs from here-doc.
// Whitespace acceptable after <<[-] operator
//
if (HereDoc.State == 0) { // '<<' encountered
HereDoc.Quote = sc.chNext;
HereDoc.Quoted = false;
HereDoc.DelimiterLength = 0;
HereDoc.Delimiter[HereDoc.DelimiterLength] = '\0';
if (sc.chNext == '\'' || sc.chNext == '\"') { // a quoted here-doc delimiter (' or ")
sc.Forward();
HereDoc.Quoted = true;
HereDoc.State = 1;
} else if (setHereDoc.Contains(sc.chNext) ||
(sc.chNext == '=' && cmdState != BASH_CMD_ARITH)) {
// an unquoted here-doc delimiter, no special handling
HereDoc.State = 1;
} else if (sc.chNext == '<') { // HERE string <<<
sc.Forward();
sc.ForwardSetState(SCE_SH_DEFAULT);
} else if (IsASpace(sc.chNext)) {
// eat whitespace
} else if (setLeftShift.Contains(sc.chNext) ||
(sc.chNext == '=' && cmdState == BASH_CMD_ARITH)) {
// left shift <<$var or <<= cases
sc.ChangeState(SCE_SH_OPERATOR);
sc.ForwardSetState(SCE_SH_DEFAULT);
} else {
// symbols terminates; deprecated zero-length delimiter
HereDoc.State = 1;
}
} else if (HereDoc.State == 1) { // collect the delimiter
// * if single quoted, there's no escape
// * if double quoted, there are \\ and \" escapes
if ((HereDoc.Quote == '\'' && sc.ch != HereDoc.Quote) ||
(HereDoc.Quoted && sc.ch != HereDoc.Quote && sc.ch != '\\') ||
(HereDoc.Quote != '\'' && sc.chPrev == '\\') ||
(setHereDoc2.Contains(sc.ch))) {
HereDoc.Append(sc.ch);
} else if (HereDoc.Quoted && sc.ch == HereDoc.Quote) { // closing quote => end of delimiter
sc.ForwardSetState(SCE_SH_DEFAULT);
} else if (sc.ch == '\\') {
if (HereDoc.Quoted && sc.chNext != HereDoc.Quote && sc.chNext != '\\') {
// in quoted prefixes only \ and the quote eat the escape
HereDoc.Append(sc.ch);
} else {
// skip escape prefix
}
} else if (!HereDoc.Quoted) {
sc.SetState(SCE_SH_DEFAULT);
}
if (HereDoc.DelimiterLength >= HERE_DELIM_MAX - 1) { // force blowup
sc.SetState(SCE_SH_ERROR);
HereDoc.State = 0;
}
}
break;
case SCE_SH_HERE_Q:
// HereDoc.State == 2
if (sc.atLineStart) {
sc.SetState(SCE_SH_HERE_Q);
int prefixws = 0;
while (sc.ch == '\t' && !sc.atLineEnd) { // tabulation prefix
sc.Forward();
prefixws++;
}
if (prefixws > 0)
sc.SetState(SCE_SH_HERE_Q);
while (!sc.atLineEnd) {
sc.Forward();
}
char s[HERE_DELIM_MAX];
sc.GetCurrent(s, sizeof(s));
if (sc.LengthCurrent() == 0) { // '' or "" delimiters
if ((prefixws == 0 || HereDoc.Indent) &&
HereDoc.Quoted && HereDoc.DelimiterLength == 0)
sc.SetState(SCE_SH_DEFAULT);
break;
}
if (s[strlen(s) - 1] == '\r')
s[strlen(s) - 1] = '\0';
if (strcmp(HereDoc.Delimiter, s) == 0) {
if ((prefixws == 0) || // indentation rule
(prefixws > 0 && HereDoc.Indent)) {
sc.SetState(SCE_SH_DEFAULT);
break;
}
}
}
break;
case SCE_SH_SCALAR: // variable names
if (!setParam.Contains(sc.ch)) {
if (sc.LengthCurrent() == 1) {
// Special variable: $(, $_ etc.
sc.ForwardSetState(SCE_SH_DEFAULT);
} else {
sc.SetState(SCE_SH_DEFAULT);
}
}
break;
case SCE_SH_STRING: // delimited styles, can nest
case SCE_SH_BACKTICKS:
if (sc.ch == '\\' && QuoteStack.Up != '\\') {
if (QuoteStack.Style != BASH_DELIM_LITERAL)
sc.Forward();
} else if (sc.ch == QuoteStack.Down) {
QuoteStack.Count--;
if (QuoteStack.Count == 0) {
if (QuoteStack.Depth > 0) {
QuoteStack.Pop();
} else
sc.ForwardSetState(SCE_SH_DEFAULT);
}
} else if (sc.ch == QuoteStack.Up) {
QuoteStack.Count++;
} else {
if (QuoteStack.Style == BASH_DELIM_STRING ||
QuoteStack.Style == BASH_DELIM_LSTRING
) { // do nesting for "string", $"locale-string"
if (sc.ch == '`') {
QuoteStack.Push(sc.ch, BASH_DELIM_BACKTICK);
} else if (sc.ch == '$' && sc.chNext == '(') {
sc.Forward();
QuoteStack.Push(sc.ch, BASH_DELIM_COMMAND);
}
} else if (QuoteStack.Style == BASH_DELIM_COMMAND ||
QuoteStack.Style == BASH_DELIM_BACKTICK
) { // do nesting for $(command), `command`
if (sc.ch == '\'') {
QuoteStack.Push(sc.ch, BASH_DELIM_LITERAL);
} else if (sc.ch == '\"') {
QuoteStack.Push(sc.ch, BASH_DELIM_STRING);
} else if (sc.ch == '`') {
QuoteStack.Push(sc.ch, BASH_DELIM_BACKTICK);
} else if (sc.ch == '$') {
if (sc.chNext == '\'') {
sc.Forward();
QuoteStack.Push(sc.ch, BASH_DELIM_CSTRING);
} else if (sc.chNext == '\"') {
sc.Forward();
QuoteStack.Push(sc.ch, BASH_DELIM_LSTRING);
} else if (sc.chNext == '(') {
sc.Forward();
QuoteStack.Push(sc.ch, BASH_DELIM_COMMAND);
}
}
}
}
break;
case SCE_SH_PARAM: // ${parameter}
if (sc.ch == '\\' && Quote.Up != '\\') {
sc.Forward();
} else if (sc.ch == Quote.Down) {
Quote.Count--;
if (Quote.Count == 0) {
sc.ForwardSetState(SCE_SH_DEFAULT);
}
} else if (sc.ch == Quote.Up) {
Quote.Count++;
}
break;
case SCE_SH_CHARACTER: // singly-quoted strings
if (sc.ch == Quote.Down) {
Quote.Count--;
if (Quote.Count == 0) {
sc.ForwardSetState(SCE_SH_DEFAULT);
}
}
break;
}
// Must check end of HereDoc state 1 before default state is handled
if (HereDoc.State == 1 && sc.atLineEnd) {
// Begin of here-doc (the line after the here-doc delimiter):
// Lexically, the here-doc starts from the next line after the >>, but the
// first line of here-doc seem to follow the style of the last EOL sequence
HereDoc.State = 2;
if (HereDoc.Quoted) {
if (sc.state == SCE_SH_HERE_DELIM) {
// Missing quote at end of string! Syntax error in bash 4.3
// Mark this bit as an error, do not colour any here-doc
sc.ChangeState(SCE_SH_ERROR);
sc.SetState(SCE_SH_DEFAULT);
} else {
// HereDoc.Quote always == '\''
sc.SetState(SCE_SH_HERE_Q);
}
} else if (HereDoc.DelimiterLength == 0) {
// no delimiter, illegal (but '' and "" are legal)
sc.ChangeState(SCE_SH_ERROR);
sc.SetState(SCE_SH_DEFAULT);
} else {
sc.SetState(SCE_SH_HERE_Q);
}
}
// update cmdState about the current command segment
if (stylePrev != SCE_SH_DEFAULT && sc.state == SCE_SH_DEFAULT) {
cmdState = cmdStateNew;
}
// Determine if a new state should be entered.
if (sc.state == SCE_SH_DEFAULT) {
if (sc.ch == '\\') {
// Bash can escape any non-newline as a literal
sc.SetState(SCE_SH_IDENTIFIER);
if (sc.chNext == '\r' || sc.chNext == '\n')
sc.SetState(SCE_SH_OPERATOR);
} else if (IsADigit(sc.ch)) {
sc.SetState(SCE_SH_NUMBER);
numBase = BASH_BASE_DECIMAL;
if (sc.ch == '0') { // hex,octal
if (sc.chNext == 'x' || sc.chNext == 'X') {
numBase = BASH_BASE_HEX;
sc.Forward();
} else if (IsADigit(sc.chNext)) {
#ifdef PEDANTIC_OCTAL
numBase = BASH_BASE_OCTAL;
#else
numBase = BASH_BASE_HEX;
#endif
}
}
} else if (setWordStart.Contains(sc.ch)) {
sc.SetState(SCE_SH_WORD);
} else if (sc.ch == '#') {
if (stylePrev != SCE_SH_WORD && stylePrev != SCE_SH_IDENTIFIER &&
(sc.currentPos == 0 || setMetaCharacter.Contains(sc.chPrev))) {
sc.SetState(SCE_SH_COMMENTLINE);
} else {
sc.SetState(SCE_SH_WORD);
}
// handle some zsh features within arithmetic expressions only
if (cmdState == BASH_CMD_ARITH) {
if (sc.chPrev == '[') { // [#8] [##8] output digit setting
sc.SetState(SCE_SH_WORD);
if (sc.chNext == '#') {
sc.Forward();
}
} else if (sc.Match("##^") && IsUpperCase(sc.GetRelative(3))) { // ##^A
sc.SetState(SCE_SH_IDENTIFIER);
sc.Forward(3);
} else if (sc.chNext == '#' && !IsASpace(sc.GetRelative(2))) { // ##a
sc.SetState(SCE_SH_IDENTIFIER);
sc.Forward(2);
} else if (setWordStart.Contains(sc.chNext)) { // #name
sc.SetState(SCE_SH_IDENTIFIER);
}
}
} else if (sc.ch == '\"') {
sc.SetState(SCE_SH_STRING);
QuoteStack.Start(sc.ch, BASH_DELIM_STRING);
} else if (sc.ch == '\'') {
sc.SetState(SCE_SH_CHARACTER);
Quote.Start(sc.ch);
} else if (sc.ch == '`') {
sc.SetState(SCE_SH_BACKTICKS);
QuoteStack.Start(sc.ch, BASH_DELIM_BACKTICK);
} else if (sc.ch == '$') {
if (sc.Match("$((")) {
sc.SetState(SCE_SH_OPERATOR); // handle '((' later
continue;
}
sc.SetState(SCE_SH_SCALAR);
sc.Forward();
if (sc.ch == '{') {
sc.ChangeState(SCE_SH_PARAM);
Quote.Start(sc.ch);
} else if (sc.ch == '\'') {
sc.ChangeState(SCE_SH_STRING);
QuoteStack.Start(sc.ch, BASH_DELIM_CSTRING);
} else if (sc.ch == '"') {
sc.ChangeState(SCE_SH_STRING);
QuoteStack.Start(sc.ch, BASH_DELIM_LSTRING);
} else if (sc.ch == '(') {
sc.ChangeState(SCE_SH_BACKTICKS);
QuoteStack.Start(sc.ch, BASH_DELIM_COMMAND);
} else if (sc.ch == '`') { // $` seen in a configure script, valid?
sc.ChangeState(SCE_SH_BACKTICKS);
QuoteStack.Start(sc.ch, BASH_DELIM_BACKTICK);
} else {
continue; // scalar has no delimiter pair
}
} else if (sc.Match('<', '<')) {
sc.SetState(SCE_SH_HERE_DELIM);
HereDoc.State = 0;
if (sc.GetRelative(2) == '-') { // <<- indent case
HereDoc.Indent = true;
sc.Forward();
} else {
HereDoc.Indent = false;
}
} else if (sc.ch == '-' && // one-char file test operators
setSingleCharOp.Contains(sc.chNext) &&
!setWord.Contains(sc.GetRelative(2)) &&
IsASpace(sc.chPrev)) {
sc.SetState(SCE_SH_WORD);
sc.Forward();
} else if (setBashOperator.Contains(sc.ch)) {
char s[10];
bool isCmdDelim = false;
sc.SetState(SCE_SH_OPERATOR);
// globs have no whitespace, do not appear in arithmetic expressions
if (cmdState != BASH_CMD_ARITH && sc.ch == '(' && sc.chNext != '(') {
int i = GlobScan(sc);
if (i > 1) {
sc.SetState(SCE_SH_IDENTIFIER);
sc.Forward(i);
continue;
}
}
// handle opening delimiters for test/arithmetic expressions - ((,[[,[
if (cmdState == BASH_CMD_START
|| cmdState == BASH_CMD_BODY) {
if (sc.Match('(', '(')) {
cmdState = BASH_CMD_ARITH;
sc.Forward();
} else if (sc.Match('[', '[') && IsASpace(sc.GetRelative(2))) {
cmdState = BASH_CMD_TEST;
testExprType = 1;
sc.Forward();
} else if (sc.ch == '[' && IsASpace(sc.chNext)) {
cmdState = BASH_CMD_TEST;
testExprType = 2;
}
}
// special state -- for ((x;y;z)) in ... looping
if (cmdState == BASH_CMD_WORD && sc.Match('(', '(')) {
cmdState = BASH_CMD_ARITH;
sc.Forward();
continue;
}
// handle command delimiters in command START|BODY|WORD state, also TEST if 'test'
if (cmdState == BASH_CMD_START
|| cmdState == BASH_CMD_BODY
|| cmdState == BASH_CMD_WORD
|| (cmdState == BASH_CMD_TEST && testExprType == 0)) {
s[0] = static_cast<char>(sc.ch);
if (setBashOperator.Contains(sc.chNext)) {
s[1] = static_cast<char>(sc.chNext);
s[2] = '\0';
isCmdDelim = cmdDelimiter.InList(s);
if (isCmdDelim)
sc.Forward();
}
if (!isCmdDelim) {
s[1] = '\0';
isCmdDelim = cmdDelimiter.InList(s);
}
if (isCmdDelim) {
cmdState = BASH_CMD_DELIM;
continue;
}
}
// handle closing delimiters for test/arithmetic expressions - )),]],]
if (cmdState == BASH_CMD_ARITH && sc.Match(')', ')')) {
cmdState = BASH_CMD_BODY;
sc.Forward();
} else if (cmdState == BASH_CMD_TEST && IsASpace(sc.chPrev)) {
if (sc.Match(']', ']') && testExprType == 1) {
sc.Forward();
cmdState = BASH_CMD_BODY;
} else if (sc.ch == ']' && testExprType == 2) {
cmdState = BASH_CMD_BODY;
}
}
}
}// sc.state
}
sc.Complete();
if (sc.state == SCE_SH_HERE_Q) {
styler.ChangeLexerState(sc.currentPos, styler.Length());
}
sc.Complete();
}
static void FoldABAQUSDoc(Sci_PositionU startPos, Sci_Position length, int,
WordList *[], Accessor &styler) {
Sci_Position startLine = styler.GetLine(startPos) ;
Sci_Position endLine = styler.GetLine(startPos+length-1) ;
// bool foldCompact = styler.GetPropertyInt("fold.compact", 1) != 0;
// We want to deal with all the cases
// To know the correct indentlevel, we need to look back to the
// previous command line indentation level
// order of formatting keyline datalines commentlines
Sci_Position beginData = -1 ;
Sci_Position beginComment = -1 ;
Sci_Position prvKeyLine = startLine ;
Sci_Position prvKeyLineTp = 0 ;
// Scan until we find the previous keyword line
// this will give us the level reference that we need
while ( prvKeyLine > 0 ) {
prvKeyLine-- ;
prvKeyLineTp = LineType(prvKeyLine, styler) ;
if ( prvKeyLineTp & 4 )
break ;
}
// Determine the base line level of all lines following
// the previous keyword
// new keyword lines are placed on this level
//if ( prvKeyLineTp & 4 ) {
int level = styler.LevelAt(prvKeyLine) & ~SC_FOLDLEVELHEADERFLAG ;
//}
// uncomment line below if weird behaviour continues
prvKeyLine = -1 ;
// Now start scanning over the lines.
for ( Sci_Position line = startLine; line <= endLine; line++ ) {
int lineType = LineType(line, styler) ;
// Check for comment line
if ( lineType == 8 ) {
if ( beginComment < 0 ) {
beginComment = line ;
}
}
// Check for data line
if ( (lineType == 1) || (lineType == 3) ) {
if ( beginData < 0 ) {
if ( beginComment >= 0 ) {
beginData = beginComment ;
} else {
beginData = line ;
}
}
beginComment = -1 ;
}
// Check for keywordline.
// As soon as a keyword line is encountered, we can set the
// levels of everything from the previous keyword line to this one
if ( lineType & 4 ) {
// this is a keyword, we can now place the previous keyword
// all its data lines and the remainder
// Write comments and data line
if ( beginComment < 0 ) {
beginComment = line ;
}
if ( beginData < 0 ) {
beginData = beginComment ;
if ( prvKeyLineTp != 5 )
SafeSetLevel(prvKeyLine, level, styler) ;
else
SafeSetLevel(prvKeyLine, level | SC_FOLDLEVELHEADERFLAG, styler) ;
} else {
SafeSetLevel(prvKeyLine, level | SC_FOLDLEVELHEADERFLAG, styler) ;
}
int datLevel = level + 1 ;
if ( !(prvKeyLineTp & 4) ) {
datLevel = level ;
}
for ( Sci_Position ll = beginData; ll < beginComment; ll++ )
SafeSetLevel(ll, datLevel, styler) ;
// The keyword we just found is going to be written at another level
// if we have a type 5 and type 6
if ( prvKeyLineTp == 5 ) {
level += 1 ;
}
if ( prvKeyLineTp == 6 ) {
level -= 1 ;
if ( level < 0 ) {
level = 0 ;
}
}
for ( Sci_Position lll = beginComment; lll < line; lll++ )
SafeSetLevel(lll, level, styler) ;
// wrap and reset
beginComment = -1 ;
beginData = -1 ;
prvKeyLine = line ;
prvKeyLineTp = lineType ;
}
}
if ( beginComment < 0 ) {
beginComment = endLine + 1 ;
} else {
// We need to find out whether this comment block is followed by
// a data line or a keyword line
const Sci_Position docLines = styler.GetLine(styler.Length() - 1);
for ( Sci_Position line = endLine + 1; line <= docLines; line++ ) {
Sci_Position lineType = LineType(line, styler) ;
if ( lineType != 8 ) {
if ( !(lineType & 4) ) {
beginComment = endLine + 1 ;
}
break ;
}
}
}
if ( beginData < 0 ) {
beginData = beginComment ;
if ( prvKeyLineTp != 5 )
SafeSetLevel(prvKeyLine, level, styler) ;
else
SafeSetLevel(prvKeyLine, level | SC_FOLDLEVELHEADERFLAG, styler) ;
} else {
SafeSetLevel(prvKeyLine, level | SC_FOLDLEVELHEADERFLAG, styler) ;
}
int datLevel = level + 1 ;
if ( !(prvKeyLineTp & 4) ) {
datLevel = level ;
}
for ( Sci_Position ll = beginData; ll < beginComment; ll++ )
SafeSetLevel(ll, datLevel, styler) ;
if ( prvKeyLineTp == 5 ) {
level += 1 ;
}
if ( prvKeyLineTp == 6 ) {
level -= 1 ;
}
for ( Sci_Position m = beginComment; m <= endLine; m++ )
SafeSetLevel(m, level, styler) ;
}
// Store both the current line's fold level and the next lines in the
// level store to make it easy to pick up with each increment
// and to make it possible to fiddle the current level for "} else {".
static void FoldEclDoc(unsigned int startPos, int length, int initStyle,
WordList *[], Accessor &styler) {
bool foldComment = true;
bool foldPreprocessor = true;
bool foldCompact = true;
bool foldAtElse = true;
unsigned int endPos = startPos + length;
int visibleChars = 0;
int lineCurrent = styler.GetLine(startPos);
int levelCurrent = SC_FOLDLEVELBASE;
if (lineCurrent > 0)
levelCurrent = styler.LevelAt(lineCurrent-1) >> 16;
int levelMinCurrent = levelCurrent;
int levelNext = levelCurrent;
char chNext = styler[startPos];
int styleNext = styler.StyleAt(startPos);
int style = initStyle;
for (unsigned int i = startPos; i < endPos; i++) {
char ch = chNext;
chNext = styler.SafeGetCharAt(i + 1);
int stylePrev = style;
style = styleNext;
styleNext = styler.StyleAt(i + 1);
bool atEOL = (ch == '\r' && chNext != '\n') || (ch == '\n');
if (foldComment && IsStreamCommentStyle(style)) {
if (!IsStreamCommentStyle(stylePrev) && (stylePrev != SCE_ECL_COMMENTLINEDOC)) {
levelNext++;
} else if (!IsStreamCommentStyle(styleNext) && (styleNext != SCE_ECL_COMMENTLINEDOC) && !atEOL) {
// Comments don't end at end of line and the next character may be unstyled.
levelNext--;
}
}
if (foldComment && (style == SCE_ECL_COMMENTLINE)) {
if ((ch == '/') && (chNext == '/')) {
char chNext2 = styler.SafeGetCharAt(i + 2);
if (chNext2 == '{') {
levelNext++;
} else if (chNext2 == '}') {
levelNext--;
}
}
}
if (foldPreprocessor && (style == SCE_ECL_PREPROCESSOR)) {
if (ch == '#') {
unsigned int j = i + 1;
while ((j < endPos) && IsASpaceOrTab(styler.SafeGetCharAt(j))) {
j++;
}
if (MatchNoCase(styler, j, "region") || MatchNoCase(styler, j, "if")) {
levelNext++;
} else if (MatchNoCase(styler, j, "endregion") || MatchNoCase(styler, j, "end")) {
levelNext--;
}
}
}
if (style == SCE_ECL_OPERATOR) {
if (ch == '{') {
// Measure the minimum before a '{' to allow
// folding on "} else {"
if (levelMinCurrent > levelNext) {
levelMinCurrent = levelNext;
}
levelNext++;
} else if (ch == '}') {
levelNext--;
}
}
if (style == SCE_ECL_WORD2) {
if (MatchNoCase(styler, i, "record") || MatchNoCase(styler, i, "transform") || MatchNoCase(styler, i, "type") || MatchNoCase(styler, i, "function") ||
MatchNoCase(styler, i, "module") || MatchNoCase(styler, i, "service") || MatchNoCase(styler, i, "interface") || MatchNoCase(styler, i, "ifblock") ||
MatchNoCase(styler, i, "macro") || MatchNoCase(styler, i, "beginc++")) {
levelNext++;
} else if (MatchNoCase(styler, i, "endmacro") || MatchNoCase(styler, i, "endc++") || MatchNoCase(styler, i, "end")) {
levelNext--;
}
}
if (atEOL || (i == endPos-1)) {
int levelUse = levelCurrent;
if (foldAtElse) {
levelUse = levelMinCurrent;
}
int lev = levelUse | levelNext << 16;
if (visibleChars == 0 && foldCompact)
lev |= SC_FOLDLEVELWHITEFLAG;
if (levelUse < levelNext)
lev |= SC_FOLDLEVELHEADERFLAG;
if (lev != styler.LevelAt(lineCurrent)) {
styler.SetLevel(lineCurrent, lev);
}
lineCurrent++;
levelCurrent = levelNext;
levelMinCurrent = levelCurrent;
if (atEOL && (i == static_cast<unsigned int>(styler.Length()-1))) {
// There is an empty line at end of file so give it same level and empty
styler.SetLevel(lineCurrent, (levelCurrent | levelCurrent << 16) | SC_FOLDLEVELWHITEFLAG);
}
visibleChars = 0;
}
if (!IsASpace(ch))
visibleChars++;
}
}
static void FoldPyDoc(unsigned int startPos, int length, int /*initStyle - unused*/,
WordList *[], Accessor &styler) {
const int maxPos = startPos + length;
const int maxLines = (maxPos == styler.Length()) ? styler.GetLine(maxPos) : styler.GetLine(maxPos - 1); // Requested last line
const int docLines = styler.GetLine(styler.Length()); // Available last line
// property fold.comment.python
// This option enables folding multi-line comments when using the Python lexer.
const bool foldComment = styler.GetPropertyInt("fold.comment.python") != 0;
// property fold.quotes.python
// This option enables folding multi-line quoted strings when using the Python lexer.
const bool foldQuotes = styler.GetPropertyInt("fold.quotes.python") != 0;
const bool foldCompact = styler.GetPropertyInt("fold.compact") != 0;
// Backtrack to previous non-blank line so we can determine indent level
// for any white space lines (needed esp. within triple quoted strings)
// and so we can fix any preceding fold level (which is why we go back
// at least one line in all cases)
int spaceFlags = 0;
int lineCurrent = styler.GetLine(startPos);
int indentCurrent = styler.IndentAmount(lineCurrent, &spaceFlags, NULL);
while (lineCurrent > 0) {
lineCurrent--;
indentCurrent = styler.IndentAmount(lineCurrent, &spaceFlags, NULL);
if (!(indentCurrent & SC_FOLDLEVELWHITEFLAG) &&
(!IsCommentLine(lineCurrent, styler)) &&
(!IsQuoteLine(lineCurrent, styler)))
break;
}
int indentCurrentLevel = indentCurrent & SC_FOLDLEVELNUMBERMASK;
// Set up initial loop state
startPos = styler.LineStart(lineCurrent);
int prev_state = SCE_P_DEFAULT & 31;
if (lineCurrent >= 1)
prev_state = styler.StyleAt(startPos - 1) & 31;
int prevQuote = foldQuotes && ((prev_state == SCE_P_TRIPLE) || (prev_state == SCE_P_TRIPLEDOUBLE));
int prevComment = 0;
if (lineCurrent >= 1)
prevComment = foldComment && IsCommentLine(lineCurrent - 1, styler);
// Process all characters to end of requested range or end of any triple quote
// or comment that hangs over the end of the range. Cap processing in all cases
// to end of document (in case of unclosed quote or comment at end).
while ((lineCurrent <= docLines) && ((lineCurrent <= maxLines) || prevQuote || prevComment)) {
// Gather info
int lev = indentCurrent;
int lineNext = lineCurrent + 1;
int indentNext = indentCurrent;
int quote = false;
if (lineNext <= docLines) {
// Information about next line is only available if not at end of document
indentNext = styler.IndentAmount(lineNext, &spaceFlags, NULL);
int lookAtPos = (styler.LineStart(lineNext) == styler.Length()) ? styler.Length() - 1 : styler.LineStart(lineNext);
int style = styler.StyleAt(lookAtPos) & 31;
quote = foldQuotes && ((style == SCE_P_TRIPLE) || (style == SCE_P_TRIPLEDOUBLE));
}
const int quote_start = (quote && !prevQuote);
const int quote_continue = (quote && prevQuote);
const int comment = foldComment && IsCommentLine(lineCurrent, styler);
const int comment_start = (comment && !prevComment && (lineNext <= docLines) &&
IsCommentLine(lineNext, styler) && (lev > SC_FOLDLEVELBASE));
const int comment_continue = (comment && prevComment);
if ((!quote || !prevQuote) && !comment)
indentCurrentLevel = indentCurrent & SC_FOLDLEVELNUMBERMASK;
if (quote)
indentNext = indentCurrentLevel;
if (indentNext & SC_FOLDLEVELWHITEFLAG)
indentNext = SC_FOLDLEVELWHITEFLAG | indentCurrentLevel;
if (quote_start) {
// Place fold point at start of triple quoted string
lev |= SC_FOLDLEVELHEADERFLAG;
} else if (quote_continue || prevQuote) {
// Add level to rest of lines in the string
lev = lev + 1;
} else if (comment_start) {
// Place fold point at start of a block of comments
lev |= SC_FOLDLEVELHEADERFLAG;
} else if (comment_continue) {
// Add level to rest of lines in the block
lev = lev + 1;
}
// Skip past any blank lines for next indent level info; we skip also
// comments (all comments, not just those starting in column 0)
// which effectively folds them into surrounding code rather
// than screwing up folding.
while (!quote &&
(lineNext < docLines) &&
((indentNext & SC_FOLDLEVELWHITEFLAG) ||
(lineNext <= docLines && IsCommentLine(lineNext, styler)))) {
lineNext++;
indentNext = styler.IndentAmount(lineNext, &spaceFlags, NULL);
}
const int levelAfterComments = indentNext & SC_FOLDLEVELNUMBERMASK;
const int levelBeforeComments = Maximum(indentCurrentLevel,levelAfterComments);
// Now set all the indent levels on the lines we skipped
// Do this from end to start. Once we encounter one line
// which is indented more than the line after the end of
// the comment-block, use the level of the block before
int skipLine = lineNext;
int skipLevel = levelAfterComments;
while (--skipLine > lineCurrent) {
int skipLineIndent = styler.IndentAmount(skipLine, &spaceFlags, NULL);
if (foldCompact) {
if ((skipLineIndent & SC_FOLDLEVELNUMBERMASK) > levelAfterComments)
skipLevel = levelBeforeComments;
int whiteFlag = skipLineIndent & SC_FOLDLEVELWHITEFLAG;
styler.SetLevel(skipLine, skipLevel | whiteFlag);
} else {
if ((skipLineIndent & SC_FOLDLEVELNUMBERMASK) > levelAfterComments &&
!(skipLineIndent & SC_FOLDLEVELWHITEFLAG) &&
!IsCommentLine(skipLine, styler))
skipLevel = levelBeforeComments;
styler.SetLevel(skipLine, skipLevel);
}
}
// Set fold header on non-quote/non-comment line
if (!quote && !comment && !(indentCurrent & SC_FOLDLEVELWHITEFLAG)) {
if ((indentCurrent & SC_FOLDLEVELNUMBERMASK) < (indentNext & SC_FOLDLEVELNUMBERMASK))
lev |= SC_FOLDLEVELHEADERFLAG;
}
// Keep track of triple quote and block comment state of previous line
prevQuote = quote;
prevComment = comment_start || comment_continue;
// Set fold level for this line and move to next line
styler.SetLevel(lineCurrent, foldCompact ? lev : lev & ~SC_FOLDLEVELWHITEFLAG);
indentCurrent = indentNext;
lineCurrent = lineNext;
}
// NOTE: Cannot set level of last line here because indentCurrent doesn't have
// header flag set; the loop above is crafted to take care of this case!
//styler.SetLevel(lineCurrent, indentCurrent);
}
