void Layer::CalcInfill (int normalfilltype, int fullfilltype,
int supportfilltype, int decorfilltype,
double InfillDistance, double FullInfillDistance,
double InfillRotation, double InfillRotationPrLayer,
double DecorInfillDistance, double DecorInfillRotation,
bool ShellOnly, // only infill for fullfill (vertical shells)
bool DisplayDebuginFill)
{
// relative extrusion for skins:
double skinfillextrf = 1./skins/skins;
//cerr <<"infill "<< normalfilltype << " - " <<fullfilltype<< endl;
normalInfill = new Infill(this,1.);
normalInfill->setName("normal");
//cout << "new "; normalInfill->printinfo();
fullInfill = new Infill(this,1.);
fullInfill->setName("full");
bridgeInfill = new Infill(this,1.);
bridgeInfill->setName("bridge");
//cout << "new " ;fullInfill->printinfo();
skinFullInfills.clear();
supportInfill = new Infill(this,0.5); // thinner walls for support
supportInfill->setName("support");
decorInfill = new Infill(this,1.);
decorInfill->setName("decor");
double rot = (InfillRotation + (double)LayerNo*InfillRotationPrLayer)/180.0*M_PI;
//cerr << fillPolygons.size();
if (!ShellOnly)
normalInfill->addInfill(Z, fillPolygons, (InfillType)normalfilltype,
InfillDistance, FullInfillDistance, rot);
fullInfill->addInfill(Z, fullFillPolygons, (InfillType)fullfilltype,
FullInfillDistance, FullInfillDistance, rot);
decorInfill->addInfill(Z, decorPolygons, (InfillType)decorfilltype,
DecorInfillDistance, DecorInfillDistance,
DecorInfillRotation/180.0*M_PI);
// cerr << LayerNo << ": "<<bridgePolygons.size() << " = " << bridge_angles.size() << endl;
assert(bridge_angles.size() == bridgePolygons.size());
for (uint b=0; b<bridgePolygons.size(); b++){
bridgeInfill->addInfill(Z, bridgePolygons[b], BridgeInfill,
FullInfillDistance, FullInfillDistance, bridge_angles[b]+M_PI/2);
}
if (skins>1) {
double skindistance = FullInfillDistance/skins;
for (uint s = 0; s<skins; s++){
double drot = rot + InfillRotationPrLayer/180.0*M_PI*s;
double sz = Z-thickness + (s+1)*thickness/skins;
//cerr << Z << " : " << skins << " - "<< s << " - " << sz << " - " << thickness <<endl;
Infill *inf = new Infill(this, skinfillextrf);
inf->setName("skin");
inf->addInfill(sz, skinFullFillPolygons, (InfillType)fullfilltype,
skindistance, skindistance, drot);
skinFullInfills.push_back(inf);
}
}
supportInfill->addInfill(Z, supportPolygons, (InfillType)supportfilltype,
1.*InfillDistance, 1.*InfillDistance, 0);
}
void Layer::CalcInfill (const Settings &settings)
{
// inFill distances in real mm:
// for full polys/layers:
double fullInfillDistance=0;
double infillDistance=0; // normal fill
double altInfillDistance=0;
double altInfillPercent=settings.get_double("Slicing","InfillPercent");
double normalInfilldist=0;
bool shellOnly = !settings.get_boolean("Slicing","DoInfill");
fullInfillDistance = settings.GetInfillDistance(thickness, 100);
if (settings.get_double("Slicing","InfillPercent") == 0)
shellOnly = true;
else
infillDistance = settings.GetInfillDistance(thickness,altInfillPercent);
int altinfill = settings.get_integer("Slicing","AltInfillLayers");
normalInfilldist = infillDistance;
if ( altinfill != 0 && LayerNo % altinfill == 0 && altInfillPercent != 0) {
altInfillDistance = settings.GetInfillDistance(thickness,
settings.get_double("Slicing","AltInfillPercent"));
normalInfilldist = altInfillDistance;
}
// first layers:
if (LayerNo < (int)settings.get_integer("Slicing","FirstLayersNum")) {
double first_infdist =
fullInfillDistance * (1.+settings.get_double("Slicing","FirstLayersInfillDist"));
normalInfilldist = max(normalInfilldist, first_infdist);
fullInfillDistance = max(fullInfillDistance, first_infdist);
}
// relative extrusion for skins:
double skinfillextrf = settings.get_double("Slicing","FullFillExtrusion")/skins/skins;
normalInfill = new Infill(this,settings.get_double("Slicing","NormalFillExtrusion"));
normalInfill->setName("normal");
fullInfill = new Infill(this,settings.get_double("Slicing","FullFillExtrusion"));
fullInfill->setName("full");
skirtInfill = new Infill(this,settings.get_double("Slicing","FullFillExtrusion"));
skirtInfill->setName("skirt");
skinFullInfills.clear();
supportInfill = new Infill(this,settings.get_double("Slicing","SupportExtrusion"));
supportInfill->setName("support");
decorInfill = new Infill(this,1.);
decorInfill->setName("decor");
thinInfill = new Infill(this, 1.);
thinInfill->setName("thin");
double rot = (settings.get_double("Slicing","InfillRotation"),
+ (double)LayerNo*settings.get_double("Slicing","InfillRotationPrLayer"))/180.0*M_PI;
if (!shellOnly)
normalInfill->addPolys(Z, fillPolygons, (InfillType)settings.get_integer("Slicing","NormalFilltype"),
normalInfilldist, fullInfillDistance, rot);
if (settings.get_boolean("Slicing","FillSkirt")) {
vector<Poly> skirtFill;
Clipping clipp;
clipp.addPolys(skirtPolygons, subject);
clipp.addPolys(*GetOuterShell(), clip);
clipp.addPolys(supportPolygons, clip);
skirtFill = clipp.subtract();
skirtFill = Clipping::getOffset(skirtFill, -fullInfillDistance);
skirtInfill->addPolys(Z, skirtFill, (InfillType)settings.get_integer("Slicing","FullFilltype"),
fullInfillDistance, fullInfillDistance, rot);
}
fullInfill->addPolys(Z, fullFillPolygons, (InfillType)settings.get_integer("Slicing","FullFilltype"),
fullInfillDistance, fullInfillDistance, rot);
decorInfill->addPolys(Z, decorPolygons, (InfillType)settings.get_integer("Slicing","DecorFilltype"),
settings.get_double("Slicing","DecorInfillDistance"),
settings.get_double("Slicing","DecorInfillDistance"),
settings.get_double("Slicing","DecorInfillRotation")/180.0*M_PI);
assert(bridge_angles.size() >= bridgePolygons.size());
bridgeInfills.resize(bridgePolygons.size());
for (uint b=0; b < bridgePolygons.size(); b++){
bridgeInfills[b] = new Infill(this, settings.get_double("Slicing","BridgeExtrusion"));
bridgeInfills[b]->addPoly(Z, bridgePolygons[b], BridgeInfill,
fullInfillDistance, fullInfillDistance,
bridge_angles[b]+M_PI/2);
}
if (skins>1) {
double skindistance = fullInfillDistance/skins;
for (uint s = 0; s<skins; s++){
double drot = rot + settings.get_double("Slicing","InfillRotationPrLayer")/180.0*M_PI*s;
double sz = Z-thickness + (s+1)*thickness/skins;
Infill *inf = new Infill(this, skinfillextrf);
inf->setName("skin");
inf->addPolys(sz, skinFullFillPolygons, (InfillType)settings.get_integer("Slicing","FullFilltype"),
skindistance, skindistance, drot);
skinFullInfills.push_back(inf);
}
}
supportInfill->addPolys(Z, supportPolygons,
(InfillType)settings.get_integer("Slicing","SupportFilltype"),
settings.get_double("Slicing","SupportInfillDistance"),
settings.get_double("Slicing","SupportInfillDistance"), 0);
thinInfill->addPolys(Z, thinPolygons, ThinInfill,
fullInfillDistance, fullInfillDistance, 0);
}