/*
* Set and send Job status to Director
*/
bool JCR::sendJobStatus(int newJobStatus)
{
JCR *jcr = this;
if (!jcr->is_JobStatus(newJobStatus)) {
setJobStatus(newJobStatus);
if (jcr->dir_bsock) {
return jcr->dir_bsock->fsend(Job_status, jcr->Job, jcr->JobStatus);
}
}
return true;
}
/*
* NB! This routine locks the device, but if committing will
* not unlock it. If not committing, it will be unlocked.
*/
static bool despool_data(DCR *dcr, bool commit)
{
DEVICE *rdev;
DCR *rdcr;
bool ok = true;
DEV_BLOCK *block;
JCR *jcr = dcr->jcr;
int status;
char ec1[50];
BSOCK *dir = jcr->dir_bsock;
Dmsg0(100, "Despooling data\n");
if (jcr->dcr->job_spool_size == 0) {
Jmsg(jcr, M_WARNING, 0, _("Despooling zero bytes. Your disk is probably FULL!\n"));
}
/*
* Commit means that the job is done, so we commit, otherwise, we
* are despooling because of user spool size max or some error
* (e.g. filesystem full).
*/
if (commit) {
Jmsg(jcr, M_INFO, 0, _("Committing spooled data to Volume \"%s\". Despooling %s bytes ...\n"),
jcr->dcr->VolumeName,
edit_uint64_with_commas(jcr->dcr->job_spool_size, ec1));
jcr->setJobStatus(JS_DataCommitting);
} else {
Jmsg(jcr, M_INFO, 0, _("Writing spooled data to Volume. Despooling %s bytes ...\n"),
edit_uint64_with_commas(jcr->dcr->job_spool_size, ec1));
jcr->setJobStatus(JS_DataDespooling);
}
jcr->sendJobStatus(JS_DataDespooling);
dcr->despool_wait = true;
dcr->spooling = false;
/*
* We work with device blocked, but not locked so that other threads
* e.g. reservations can lock the device structure.
*/
dcr->dblock(BST_DESPOOLING);
dcr->despool_wait = false;
dcr->despooling = true;
/*
* This is really quite kludgy and should be fixed some time.
* We create a dev structure to read from the spool file
* in rdev and rdcr.
*/
rdev = (DEVICE *)malloc(sizeof(DEVICE));
memset(rdev, 0, sizeof(DEVICE));
rdev->dev_name = get_memory(strlen(spool_name)+1);
bstrncpy(rdev->dev_name, spool_name, sizeof_pool_memory(rdev->dev_name));
rdev->errmsg = get_pool_memory(PM_EMSG);
*rdev->errmsg = 0;
rdev->max_block_size = dcr->dev->max_block_size;
rdev->min_block_size = dcr->dev->min_block_size;
rdev->device = dcr->dev->device;
rdcr = dcr->get_new_spooling_dcr();
setup_new_dcr_device(jcr, rdcr, rdev, NULL);
rdcr->spool_fd = dcr->spool_fd;
block = dcr->block; /* save block */
dcr->block = rdcr->block; /* make read and write block the same */
Dmsg1(800, "read/write block size = %d\n", block->buf_len);
lseek(rdcr->spool_fd, 0, SEEK_SET); /* rewind */
#if defined(HAVE_POSIX_FADVISE) && defined(POSIX_FADV_WILLNEED)
posix_fadvise(rdcr->spool_fd, 0, 0, POSIX_FADV_WILLNEED);
#endif
/* Add run time, to get current wait time */
int32_t despool_start = time(NULL) - jcr->run_time;
set_new_file_parameters(dcr);
while (ok) {
if (job_canceled(jcr)) {
ok = false;
break;
}
status = read_block_from_spool_file(rdcr);
if (status == RB_EOT) {
break;
} else if (status == RB_ERROR) {
ok = false;
break;
}
ok = dcr->write_block_to_device();
if (!ok) {
Jmsg2(jcr, M_FATAL, 0, _("Fatal append error on device %s: ERR=%s\n"),
dcr->dev->print_name(), dcr->dev->bstrerror());
Dmsg2(000, "Fatal append error on device %s: ERR=%s\n",
dcr->dev->print_name(), dcr->dev->bstrerror());
/* Force in case Incomplete set */
jcr->forceJobStatus(JS_FatalError);
}
Dmsg3(800, "Write block ok=%d FI=%d LI=%d\n", ok, block->FirstIndex, block->LastIndex);
}
/*
* If this Job is incomplete, we need to backup the FileIndex
* to the last correctly saved file so that the JobMedia
* LastIndex is correct.
*/
if (jcr->is_JobStatus(JS_Incomplete)) {
dcr->VolLastIndex = dir->get_FileIndex();
Dmsg1(100, "======= Set FI=%ld\n", dir->get_FileIndex());
}
if (!dcr->dir_create_jobmedia_record(false)) {
Jmsg2(jcr, M_FATAL, 0, _("Could not create JobMedia record for Volume=\"%s\" Job=%s\n"),
dcr->getVolCatName(), jcr->Job);
jcr->forceJobStatus(JS_FatalError); /* override any Incomplete */
}
/* Set new file/block parameters for current dcr */
set_new_file_parameters(dcr);
/*
* Subtracting run_time give us elapsed time - wait_time since
* we started despooling. Note, don't use time_t as it is 32 or 64
* bits depending on the OS and doesn't edit with %d
*/
int32_t despool_elapsed = time(NULL) - despool_start - jcr->run_time;
if (despool_elapsed <= 0) {
despool_elapsed = 1;
}
Jmsg(jcr, M_INFO, 0, _("Despooling elapsed time = %02d:%02d:%02d, Transfer rate = %s Bytes/second\n"),
despool_elapsed / 3600, despool_elapsed % 3600 / 60, despool_elapsed % 60,
edit_uint64_with_suffix(jcr->dcr->job_spool_size / despool_elapsed, ec1));
dcr->block = block; /* reset block */
lseek(rdcr->spool_fd, 0, SEEK_SET); /* rewind */
if (ftruncate(rdcr->spool_fd, 0) != 0) {
berrno be;
Jmsg(jcr, M_ERROR, 0, _("Ftruncate spool file failed: ERR=%s\n"), be.bstrerror());
/* Note, try continuing despite ftruncate problem */
}
P(mutex);
if (spool_stats.data_size < dcr->job_spool_size) {
spool_stats.data_size = 0;
} else {
spool_stats.data_size -= dcr->job_spool_size;
}
V(mutex);
P(dcr->dev->spool_mutex);
dcr->dev->spool_size -= dcr->job_spool_size;
dcr->job_spool_size = 0; /* zap size in input dcr */
V(dcr->dev->spool_mutex);
free_memory(rdev->dev_name);
free_pool_memory(rdev->errmsg);
/* Be careful to NULL the jcr and free rdev after free_dcr() */
rdcr->jcr = NULL;
rdcr->set_dev(NULL);
free_dcr(rdcr);
free(rdev);
dcr->spooling = true; /* turn on spooling again */
dcr->despooling = false;
/*
* Note, if committing we leave the device blocked. It will be removed in
* release_device();
*/
if (!commit) {
dcr->dev->dunblock();
}
jcr->sendJobStatus(JS_Running);
return ok;
}