VOID Cleanup( )
{
if (NULL != g_pFont)
{
g_pFont->Release();
}
if (NULL != g_pMesh)
{
g_pMesh->Release();
}
if ( NULL != g_pD3DDevice )
{
g_pD3DDevice->Release();
}
if ( NULL != g_pD3D )
{
g_pD3D->Release();
}
}
//-----------------------------------------------------------------------------
// Name: Render()
// Desc: Draws the scene
//-----------------------------------------------------------------------------
int RenderMesh(LPD3DXMESH mesh,D3DMATERIAL9* pMeshMaterials,LPDIRECT3DTEXTURE9* pMeshTextures,DWORD dwNumMaterials,D3DXMATRIXA16* pMatWorld)
{
g_pd3dDevice->Clear( 0, NULL, D3DCLEAR_TARGET | D3DCLEAR_ZBUFFER,
D3DCOLOR_XRGB( 0, 0, 0 ), 1.0f, 0 );
// 开始渲染 scene
if( SUCCEEDED( g_pd3dDevice->BeginScene() ) )
{
SetupMatrices();
for( DWORD i = 0; i < dwNumMaterials; i++ )
{
//执行变换矩阵
g_pd3dDevice->SetTransform( D3DTS_WORLD, pMatWorld );
g_pd3dDevice->SetMaterial( &pMeshMaterials[i] );
g_pd3dDevice->SetTexture( 0, pMeshTextures[i] );
mesh->DrawSubset( i );
}
// End the scene
g_pd3dDevice->EndScene();
}
// Present the backbuffer contents to the display
g_pd3dDevice->Present( NULL, NULL, NULL, NULL );
return 1;
}
VOID Cleanup()
{
if( g_pMeshMaterials != NULL )
delete[] g_pMeshMaterials;
if( g_pMeshTextures )
{
for( DWORD i = 0; i < g_dwNumMaterials; i++ )
{
if( g_pMeshTextures[i] )
g_pMeshTextures[i]->Release();
}
delete[] g_pMeshTextures;
}
if( g_pMesh != NULL )
g_pMesh->Release();
if( g_pd3dDevice != NULL )
g_pd3dDevice->Release();
if( g_pD3D != NULL )
g_pD3D->Release();
}
void Cleanup()
{
if (g_pMeshMaterials)
delete[] g_pMeshMaterials;
if (g_pMeshTextures)
{
for (DWORD i = 0; i < g_dwNumMaterials; i++)
{
if (g_pMeshTextures[i])
g_pMeshTextures[i]->Release();
}
delete[] g_pMeshTextures;
}
if (g_pMesh)
g_pMesh->Release();
if (g_pd3dDevice)
g_pd3dDevice->Release();
if (g_pD3D)
g_pD3D->Release();
}
//-----------------------------------------------------------------------------
// Name: Cleanup()
// Desc: Releases all previously initialized objects
//-----------------------------------------------------------------------------
VOID Cleanup()
{
// release all textures used
if ( g_pTexture != NULL )
g_pTexture->Release();
if ( g_pTexture2 != NULL )
g_pTexture2->Release();
if ( marbleTexture != NULL )
marbleTexture->Release();
if ( backgroundTexture != NULL )
backgroundTexture->Release();
if( g_pMeshMaterials != NULL )
delete[] g_pMeshMaterials;
if( g_pMeshTextures )
{
for( DWORD i = 0; i < g_dwNumMaterials; i++ )
{
if( g_pMeshTextures[i] )
g_pMeshTextures[i]->Release();
}
delete[] g_pMeshTextures;
}
if( g_pMesh != NULL )
g_pMesh->Release();
if( g_pd3dDevice != NULL )
g_pd3dDevice->Release();
if( g_pD3D != NULL )
g_pD3D->Release();
}
//*************************************************************************************************************
void Render(float alpha, float elapsedtime)
{
D3DXMATRIX vp, inv;
D3DXVECTOR3 axis(0, 1, 0);
device->Clear(0, NULL, D3DCLEAR_TARGET|D3DCLEAR_ZBUFFER, 0xff6694ed, 1.0f, 0);
device->SetTexture(0, tex);
device->SetTexture(1, normalmap);
D3DXMatrixMultiply(&vp, &view, &proj);
D3DXMatrixInverse(&inv, NULL, &view);
effect->SetVector("eyePos", (D3DXVECTOR4*)inv.m[3]);
D3DXMatrixRotationAxis(&world, &axis, timeGetTime() / 1000.0f);
D3DXMatrixInverse(&inv, NULL, &world);
effect->SetMatrix("matWorld", &world);
effect->SetMatrix("matWorldInv", &inv);
effect->SetMatrix("matViewProj", &vp);
if( SUCCEEDED(device->BeginScene()) )
{
effect->Begin(NULL, 0);
effect->BeginPass(0);
{
mesh->DrawSubset(0);
}
effect->EndPass();
effect->End();
device->EndScene();
}
device->Present(NULL, NULL, NULL, NULL);
}
//*************************************************************************************************************
void Render(float alpha, float elapsedtime)
{
D3DXMATRIX world, view, proj;
D3DXMATRIX skyworld, viewproj;
D3DXVECTOR3 eye(0, 0, -5);
D3DXVECTOR3 look(0, 0, 0);
D3DXVECTOR3 up(0, 1, 0);
D3DXVECTOR2 orient = cameraangle.smooth(alpha);
D3DXMatrixRotationYawPitchRoll(&view, orient.x, orient.y, 0);
D3DXVec3TransformCoord(&eye, &eye, &view);
D3DXMatrixPerspectiveFovLH(&proj, D3DX_PI / 4, (float)screenwidth / (float)screenheight, 0.1f, 50);
D3DXMatrixLookAtLH(&view, &eye, &look, &up);
D3DXMatrixMultiply(&viewproj, &view, &proj);
device->Clear(0, NULL, D3DCLEAR_TARGET|D3DCLEAR_ZBUFFER, 0xff6694ed, 1.0f, 0);
device->SetTransform(D3DTS_VIEW, &view);
device->SetTransform(D3DTS_PROJECTION, &proj);
for( int i = 0; i < NUM_DWARFS; ++i )
dwarfs[i].Update(elapsedtime, &dwarfmatrices[i]);
effect->SetMatrix("matViewProj", &viewproj);
if( SUCCEEDED(device->BeginScene()) )
{
// render sky
device->SetRenderState(D3DRS_ZWRITEENABLE, FALSE);
D3DXMatrixScaling(&skyworld, 20, 20, 20);
skyeffect->SetMatrix("matWorld", &skyworld);
D3DXMatrixIdentity(&skyworld);
skyeffect->SetMatrix("matWorldSky", &skyworld);
skyeffect->SetMatrix("matViewProj", &viewproj);
skyeffect->SetVector("eyePos", (D3DXVECTOR4*)&eye);
skyeffect->Begin(0, 0);
skyeffect->BeginPass(0);
{
device->SetTexture(0, skytex);
skymesh->DrawSubset(0);
}
skyeffect->EndPass();
skyeffect->End();
device->SetRenderState(D3DRS_ZWRITEENABLE, TRUE);
// render ground
D3DXMatrixScaling(&world, 5, 0.1f, 5);
world._42 = -0.05f;
device->SetTransform(D3DTS_WORLD, &world);
device->SetTexture(0, texture2);
mesh->DrawSubset(0);
// dwarfs
for( int i = 0; i < NUM_DWARFS; ++i )
dwarfs[i].Draw();
// fire
D3DXMatrixTranslation(&world, 0, 0.25f, 0);
device->SetTransform(D3DTS_WORLD, &world);
system1.Draw(world, view);
// render text
device->SetFVF(D3DFVF_XYZRHW|D3DFVF_TEX1);
device->SetRenderState(D3DRS_ZENABLE, FALSE);
device->SetRenderState(D3DRS_ALPHABLENDENABLE, TRUE);
device->SetRenderState(D3DRS_SRCBLEND, D3DBLEND_SRCALPHA);
device->SetRenderState(D3DRS_DESTBLEND, D3DBLEND_INVSRCALPHA);
device->SetTexture(0, text);
device->DrawPrimitiveUP(D3DPT_TRIANGLELIST, 2, textvertices, 6 * sizeof(float));
device->SetRenderState(D3DRS_ALPHABLENDENABLE, FALSE);
device->SetRenderState(D3DRS_ZENABLE, TRUE);
device->EndScene();
}
device->Present(NULL, NULL, NULL, NULL);
}
VOID Update()
{
DWORD currentTime = GetTickCount();
static DWORD preTime;
g_ElapsedTime = currentTime - preTime;
preTime = currentTime;
if ( GetAsyncKeyState( VK_LEFT ) )
{
g_Box[0].CenterPos.x -= g_ElapsedTime*0.002f;
}
if ( GetAsyncKeyState( VK_RIGHT ) )
{
g_Box[0].CenterPos.x += g_ElapsedTime*0.002f;
}
if ( GetAsyncKeyState( VK_UP ) )
{
g_Box[0].CenterPos.y += g_ElapsedTime*0.002f;
}
if ( GetAsyncKeyState( VK_DOWN ) )
{
g_Box[0].CenterPos.y -= g_ElapsedTime*0.002f;
}
if ( GetAsyncKeyState( VK_LBUTTON ) )
{
if (g_ElapsedTime > 20)
{
g_Method = !g_Method;
}
}
if ( GetAsyncKeyState( VK_HOME ) )
{
g_Box[1].BoxRotateZ -= 0.2f;
}
if ( GetAsyncKeyState( VK_END ) )
{
g_Box[1].BoxRotateZ += 0.2f;
}
D3DXVECTOR3 *vertices;
g_pMesh->LockVertexBuffer( D3DLOCK_READONLY, (void**) &vertices );
D3DXComputeBoundingBox( vertices, g_pMesh->GetNumVertices(), g_pMesh->GetNumBytesPerVertex(), &g_MinPoint, &g_MaxPoint );
g_pMesh->UnlockVertexBuffer();
D3DXMATRIX matScale, matTrans, matRotateZ, matWorld;
D3DXMatrixTranslation( &matTrans, g_Box[0].CenterPos.x, g_Box[0].CenterPos.y, g_Box[0].CenterPos.z );
D3DXMatrixScaling( &matScale, g_Box[0].BoxScaling, g_Box[0].BoxScaling, g_Box[0].BoxScaling );
D3DXMatrixRotationZ( &matRotateZ, g_Box[0].BoxRotateZ );
matWorld = matRotateZ* matScale * matTrans;
D3DXVec3TransformCoord( &g_Box[0].MinPoint, &g_MinPoint, &matWorld );
D3DXVec3TransformCoord( &g_Box[0].MaxPoint, &g_MaxPoint, &matWorld );
if (!g_Method)
{
g_CheckFlag = CheckAABBIntersection( &g_Box[0].MinPoint, &g_Box[0].MaxPoint, &g_Box[1].MinPoint, &g_Box[1].MaxPoint );
}
else
{
g_CheckFlag = CheckOBBIntersection( &g_Box[0], &g_Box[1] );
}
}
HRESULT InitGeometry( )
{
if (FAILED(D3DXCreateBox(g_pD3DDevice, 1.f, 1.f, 1.f, &g_pMesh, NULL)))
{
return E_FAIL;
}
D3DXVECTOR3 *vertices;
g_pMesh->LockVertexBuffer( D3DLOCK_READONLY, (void**) &vertices );
D3DXComputeBoundingBox( vertices, g_pMesh->GetNumVertices(), g_pMesh->GetNumBytesPerVertex(), &g_MinPoint, &g_MaxPoint );
g_pMesh->UnlockVertexBuffer();
D3DXMATRIX matScale, matTrans, matRotateZ, matWorld;
g_Box[0].BoxScaling = 1.5f;
g_Box[0].CenterPos = D3DXVECTOR3( 0.f, 0.f, 0.f );
g_Box[0].BoxRotateZ = 0.f;
g_Box[0].AxisDir[0] = D3DXVECTOR3( 1, 0, 0 );
g_Box[0].AxisDir[1] = D3DXVECTOR3( 0, 1, 0 );
g_Box[0].AxisDir[2] = D3DXVECTOR3( 0, 0, 1 );
for ( int i = 0; i < 3; ++i )
{
g_Box[0].AxisLen[i] = 0.5f;
D3DXVec3TransformNormal( &(g_Box[0].AxisDir[i]), &(g_Box[0].AxisDir[i]), &matRotateZ );
D3DXVec3Normalize( &( g_Box[0].AxisDir[i] ), &( g_Box[0].AxisDir[i] ) );
g_Box[0].AxisLen[i] = g_Box[0].AxisLen[i] * g_Box[0].BoxScaling;
}
D3DXMatrixTranslation( &matTrans, g_Box[0].CenterPos.x, g_Box[0].CenterPos.y, g_Box[0].CenterPos.z );
D3DXMatrixScaling( &matScale, g_Box[0].BoxScaling, g_Box[0].BoxScaling, g_Box[0].BoxScaling );
D3DXMatrixRotationZ( &matRotateZ, g_Box[0].BoxRotateZ );
matWorld = matRotateZ* matScale * matTrans;
D3DXVec3TransformCoord( &g_Box[0].MinPoint, &g_MinPoint, &matWorld );
D3DXVec3TransformCoord( &g_Box[0].MaxPoint, &g_MaxPoint, &matWorld );
g_Box[1].BoxScaling = 2.f;
g_Box[1].CenterPos = D3DXVECTOR3( 3.f, 3.f, 0.f );
g_Box[1].BoxRotateZ = 0.f;
g_Box[1].AxisDir[0] = D3DXVECTOR3( 1, 0, 0 );
g_Box[1].AxisDir[1] = D3DXVECTOR3( 0, 1, 0 );
g_Box[1].AxisDir[2] = D3DXVECTOR3( 0, 0, 1 );
for ( int i = 0; i < 3; ++i )
{
g_Box[1].AxisLen[i] = 0.5f;
D3DXVec3TransformNormal( &( g_Box[0].AxisDir[i] ), &( g_Box[1].AxisDir[i] ), &matRotateZ );
D3DXVec3Normalize( &( g_Box[1].AxisDir[i] ), &( g_Box[1].AxisDir[i] ) );
g_Box[1].AxisLen[i] = g_Box[1].AxisLen[i] * g_Box[1].BoxScaling;
}
D3DXMatrixTranslation( &matTrans, g_Box[1].CenterPos.x, g_Box[1].CenterPos.y, g_Box[1].CenterPos.z );
D3DXMatrixScaling( &matScale, g_Box[1].BoxScaling, g_Box[1].BoxScaling, g_Box[1].BoxScaling );
D3DXMatrixRotationZ( &matRotateZ, g_Box[1].BoxRotateZ );
matWorld = matRotateZ* matScale * matTrans;
D3DXVec3TransformCoord( &g_Box[1].MinPoint, &g_MinPoint, &matWorld );
D3DXVec3TransformCoord( &g_Box[1].MaxPoint, &g_MaxPoint, &matWorld );
return S_OK;
}
//*************************************************************************************************************
void Render(float alpha, float elapsedtime)
{
static float time = 0;
D3DXMATRIX inv;
D3DXVECTOR3 axis(0, 1, 0);
D3DXVECTOR4 texelsize(1.0f / (float)screenwidth, 1.0f / (float)screenheight, 0, 1);
LPDIRECT3DSURFACE9 oldtarget = NULL;
time += elapsedtime;
D3DXMatrixRotationAxis(&inv, &axis, time);
D3DXMatrixScaling(&world, 0.3f, 0.3f, 0.3f);
//D3DXMatrixScaling(&world, 0.6f, 0.6f, 0.6f);
D3DXMatrixMultiply(&world, &world, &inv);
D3DXMatrixInverse(&inv, NULL, &world);
device->SetTexture(0, texture);
device->SetTexture(1, intensity);
effect->SetMatrix("matWorld", &world);
effect->SetMatrix("matWorldInv", &inv);
effect->SetMatrix("matView", &view);
effect->SetMatrix("matProj", &proj);
if( useedgedetect )
{
device->GetRenderTarget(0, &oldtarget);
device->SetRenderTarget(0, colorsurface);
device->SetRenderTarget(1, normalsurface);
}
device->Clear(0, NULL, D3DCLEAR_TARGET|D3DCLEAR_ZBUFFER|D3DCLEAR_STENCIL, 0xff6694ed, 1.0f, 0);
if( SUCCEEDED(device->BeginScene()) )
{
// draw scene + normals/depth
effect->SetTechnique("celshading");
effect->Begin(NULL, 0);
effect->BeginPass(0);
{
mesh->DrawSubset(0);
}
effect->EndPass();
effect->End();
if( useedgedetect )
{
// edge detection
device->SetVertexDeclaration(vertexdecl);
device->SetRenderTarget(0, edgesurface);
device->SetRenderTarget(1, NULL);
device->SetTexture(0, normaltarget);
device->Clear(0, NULL, D3DCLEAR_TARGET|D3DCLEAR_ZBUFFER, 0xff6694ed, 1.0f, 0);
effect->SetTechnique("edgedetect");
effect->SetVector("texelSize", &texelsize);
effect->Begin(NULL, 0);
effect->BeginPass(0);
{
device->DrawPrimitiveUP(D3DPT_TRIANGLELIST, 2, vertices, sizeof(D3DXVECTOR4) + sizeof(D3DXVECTOR2));
}
effect->EndPass();
effect->End();
// put together
device->SetRenderTarget(0, oldtarget);
device->SetTexture(0, colortarget);
device->SetTexture(2, edgetarget);
device->Clear(0, NULL, D3DCLEAR_TARGET|D3DCLEAR_ZBUFFER, 0xff6694ed, 1.0f, 0);
oldtarget->Release();
effect->SetTechnique("final");
effect->Begin(NULL, 0);
effect->BeginPass(0);
{
device->DrawPrimitiveUP(D3DPT_TRIANGLELIST, 2, vertices, sizeof(D3DXVECTOR4) + sizeof(D3DXVECTOR2));
}
effect->EndPass();
effect->End();
}
else
{
D3DXMATRIX offproj;
// use the stencil buffer
device->SetRenderState(D3DRS_COLORWRITEENABLE, 0);
device->SetRenderState(D3DRS_ZWRITEENABLE, FALSE);
device->SetRenderState(D3DRS_STENCILENABLE, TRUE);
device->SetRenderState(D3DRS_ZENABLE, FALSE);
device->SetRenderState(D3DRS_STENCILFUNC, D3DCMP_ALWAYS);
device->SetRenderState(D3DRS_STENCILREF, 1);
device->SetRenderState(D3DRS_STENCILPASS, D3DSTENCILOP_REPLACE);
device->SetTransform(D3DTS_WORLD, &world);
device->SetTransform(D3DTS_VIEW, &view);
float thickness = 3.5f;
// render object 4 times with offseted frustum
for( float i = -thickness; i < thickness + 1; i += 2 * thickness )
{
for( float j = -thickness; j < thickness + 1; j += 2 * thickness )
{
D3DXMatrixTranslation(&offproj, i / (float)screenwidth, j / (float)screenheight, 0);
D3DXMatrixMultiply(&offproj, &proj, &offproj);
device->SetTransform(D3DTS_PROJECTION, &offproj);
mesh->DrawSubset(0);
}
}
// erase area in the center
device->SetRenderState(D3DRS_STENCILREF, 0);
device->SetTransform(D3DTS_PROJECTION, &proj);
mesh->DrawSubset(0);
// now render outlines
device->SetRenderState(D3DRS_COLORWRITEENABLE, D3DCOLORWRITEENABLE_RED|D3DCOLORWRITEENABLE_GREEN|D3DCOLORWRITEENABLE_BLUE|D3DCOLORWRITEENABLE_ALPHA);
device->SetRenderState(D3DRS_STENCILFUNC, D3DCMP_NOTEQUAL);
device->SetRenderState(D3DRS_STENCILPASS, D3DSTENCILOP_KEEP);
device->SetRenderState(D3DRS_STENCILFAIL, D3DSTENCILOP_KEEP);
device->SetFVF(D3DFVF_XYZRHW|D3DFVF_TEX1);
device->SetTextureStageState(0, D3DTSS_COLOROP, D3DTOP_SELECTARG1);
device->SetTextureStageState(0, D3DTSS_COLORARG1, D3DTA_CONSTANT);
device->SetTextureStageState(0, D3DTSS_CONSTANT, 0);
{
device->DrawPrimitiveUP(D3DPT_TRIANGLELIST, 2, vertices, sizeof(D3DXVECTOR4) + sizeof(D3DXVECTOR2));
}
device->SetTextureStageState(0, D3DTSS_COLOROP, D3DTOP_MODULATE);
device->SetTextureStageState(0, D3DTSS_COLORARG1, D3DTA_TEXTURE);
device->SetRenderState(D3DRS_ZENABLE, TRUE);
device->SetRenderState(D3DRS_ZWRITEENABLE, TRUE);
device->SetRenderState(D3DRS_STENCILENABLE, FALSE);
}
device->SetTexture(2, NULL);
// render text
device->SetFVF(D3DFVF_XYZRHW|D3DFVF_TEX1);
device->SetRenderState(D3DRS_ZENABLE, FALSE);
device->SetRenderState(D3DRS_ALPHABLENDENABLE, TRUE);
device->SetRenderState(D3DRS_SRCBLEND, D3DBLEND_SRCALPHA);
device->SetRenderState(D3DRS_DESTBLEND, D3DBLEND_INVSRCALPHA);
device->SetTexture(0, text);
device->DrawPrimitiveUP(D3DPT_TRIANGLELIST, 2, textvertices, 6 * sizeof(float));
device->SetRenderState(D3DRS_ALPHABLENDENABLE, FALSE);
device->SetRenderState(D3DRS_ZENABLE, TRUE);
device->SetTexture(0, NULL);
device->EndScene();
}
device->Present(NULL, NULL, NULL, NULL);
}
//-----------------------------------------------------------------------------
// Name: 描画処理。
//-----------------------------------------------------------------------------
VOID Render()
{
// 画面をクリア。
g_pd3dDevice->Clear(0, NULL, D3DCLEAR_TARGET | D3DCLEAR_ZBUFFER, D3DCOLOR_XRGB(0, 0, 255), 1.0f, 0);
static int renderCount = 0;
if (SUCCEEDED(g_pd3dDevice->BeginScene()))
{
renderCount++;
D3DXMATRIXA16 matWorld;
D3DXMatrixRotationY( &g_worldMatrix, renderCount / 500.0f );
g_rotationMatrix = g_worldMatrix;
//ライトを更新
UpdateLight();
// Turn on the zbuffer
g_pd3dDevice->SetRenderState(D3DRS_ZENABLE, TRUE);
//シェーダー適用開始。
g_pEffect->SetTechnique("SkinModel");
g_pEffect->Begin(NULL, D3DXFX_DONOTSAVESHADERSTATE);
g_pEffect->BeginPass(0);
//定数レジスタに設定するカラー。
D3DXVECTOR4 color( 1.0f, 0.0f, 0.0f, 1.0f);
//ワールド行列の転送。
g_pEffect->SetMatrix("g_worldMatrix", &g_worldMatrix);
//ビュー行列の転送。
g_pEffect->SetMatrix("g_viewMatrix", &camera.GetViewMatrix()); //@カメラクラスを作るためのヒント。 カメラクラスのゲッターを使用するようにする。
//プロジェクション行列の転送。
g_pEffect->SetMatrix("g_projectionMatrix", &camera.GetProjectionMatrix()); //@カメラクラスを作るためのヒント。 カメラクラスのゲッターを使用するようにする。
//回転行列を転送。
g_pEffect->SetMatrix( "g_rotationMatrix", &g_rotationMatrix );
//ライトの向きを転送。
g_pEffect->SetVectorArray("g_diffuseLightDirection", g_diffuseLightDirection, LIGHT_NUM );
//ライトのカラーを転送。
g_pEffect->SetVectorArray("g_diffuseLightColor", g_diffuseLightColor, LIGHT_NUM );
//環境光を設定。
g_pEffect->SetVector("g_ambientLight", &g_ambientLight);
g_pEffect->CommitChanges(); //この関数を呼び出すことで、データの転送が確定する。描画を行う前に一回だけ呼び出す。
// Meshes are divided into subsets, one for each material. Render them in
// a loop
for( DWORD i = 0; i < g_dwNumMaterials; i++ )
{
g_pEffect->SetTexture("g_diffuseTexture", g_pMeshTextures[i]);
// Draw the mesh subset
g_pMesh->DrawSubset( i );
}
g_pEffect->EndPass();
g_pEffect->End();
// End the scene
g_pd3dDevice->EndScene();
}
// Present the backbuffer contents to the display
g_pd3dDevice->Present(NULL, NULL, NULL, NULL);
}
HRESULT KModelWater::LoadMesh(LPSTR pFileName)
{
HRESULT hr = S_OK;
m_dwNumPoly_X = 63; //长方形网格的长，网格数
m_dwNumPoly_Z = 63; //长方形网格的宽，网格数
LPD3DXMESH pMesh = m_pWaterUp;
LPD3DXMESH pDMesh = m_pWaterDn;
DWORD m_dNumPloy = m_dwNumPoly_X * m_dwNumPoly_Z;
DWORD m_dNumFaces = m_dNumPloy * 2;
DWORD m_dNumVertices = (m_dwNumPoly_X+1)*(m_dwNumPoly_Z+1);
SAFE_RELEASE(pMesh);
SAFE_RELEASE(pDMesh);
WORD *pwIndices;
//建立水面网格
if(FAILED(hr = g_pd3dDevice->CreateIndexBuffer(m_dNumFaces * 3 * sizeof(WORD), D3DUSAGE_DYNAMIC | D3DUSAGE_WRITEONLY,
D3DFMT_INDEX16, D3DPOOL_DEFAULT, &m_pibIndices, NULL)))
{
return hr;
}
if (FAILED(hr = D3DXCreateMeshFVF(m_dNumFaces,m_dNumVertices,D3DXMESH_MANAGED|D3DXMESH_32BIT,
D3DFVF_XYZ|D3DFVF_NORMAL|D3DFVF_NORMAL|D3DFVF_TEX1,g_pd3dDevice,&pMesh)))
{
return hr;
}
if (FAILED(hr = D3DXCreateMeshFVF(m_dNumFaces,m_dNumVertices,D3DXMESH_MANAGED|D3DXMESH_32BIT,
D3DFVF_XYZ|D3DFVF_NORMAL|D3DFVF_NORMAL|D3DFVF_TEX1,g_pd3dDevice,&pDMesh)))
{
return hr;
}
VFormat::FACES_NORMAL_TEXTURE1 * pVers = NULL;
DWORD* pIndex = NULL;
DWORD * pAttrib = NULL;
VFormat::FACES_NORMAL_TEXTURE1 * pDVers = NULL;
DWORD* pDIndex = NULL;
DWORD * pDAttrib = NULL;
if(FAILED(hr = m_pibIndices->Lock(0, m_dNumFaces *3 * sizeof(WORD), (void**) &pwIndices, D3DLOCK_DISCARD)))
return E_FAIL;
if (FAILED(pMesh->LockVertexBuffer(0,(void**)&pVers)))
return E_FAIL;
if (FAILED(pMesh->LockIndexBuffer (0,(void**)&pIndex)))
return E_FAIL;
if (FAILED(pMesh->LockAttributeBuffer(0,(DWORD**)&pAttrib)))
return E_FAIL;
if (FAILED(pDMesh->LockVertexBuffer(0,(void**)&pDVers)))
return E_FAIL;
if (FAILED(pDMesh->LockIndexBuffer (0,(void**)&pDIndex)))
return E_FAIL;
if (FAILED(pDMesh->LockAttributeBuffer(0,(DWORD**)&pDAttrib)))
return E_FAIL;
DWORD i = 0;
float _X = 1.0f/m_dwNumPoly_X;
float _Z = 1.0f/m_dwNumPoly_Z;
float m_fPolyWidth = 200;
float m_fPolyHeight = 200;
for(DWORD X =0;X<=m_dwNumPoly_X;X++)
{
for(DWORD Y =0;Y<=m_dwNumPoly_Z;Y++)
{
float PX = X * m_fPolyWidth;
float PZ = Y * m_fPolyHeight;
D3DXVECTOR2 Pos(PX,PZ);
pVers[i].p = D3DXVECTOR3(PX,200,PZ);
pVers[i].Normal = D3DXVECTOR3(0,1,0);
pVers[i].tu1 = (X * _X);
pVers[i].tv1 = (1 - Y *_Z);
pDVers[i].p = D3DXVECTOR3(PX,0,PZ);
pDVers[i].Normal = D3DXVECTOR3(0,1,0);
pDVers[i].tu1 = (X * _X);
pDVers[i].tv1 = (1 - Y *_Z);
i++;
}
}
DWORD Weight = m_dwNumPoly_X + 1;
for(X =0;X<m_dwNumPoly_X;X++)
{
for(DWORD Y =0;Y<m_dwNumPoly_Z;Y++)
{
DWORD PloyIndex = Y*m_dwNumPoly_X +X;
DWORD PolyMaterialID = 0;
DWORD Vertex_A = X *Weight+ Y;
DWORD Vertex_B = (X+1)*Weight+ Y;
DWORD Vertex_C = (X+1)*Weight+(Y+1);
DWORD Vertex_D = X *Weight+(Y+1);
DWORD Faces_A1 = (PloyIndex*2)*3;
DWORD Faces_B1 = Faces_A1 + 1;
DWORD Faces_C1 = Faces_B1 + 1;
pIndex[Faces_A1] = Vertex_A;
pIndex[Faces_B1] = Vertex_B;
pIndex[Faces_C1] = Vertex_D;
pAttrib[PloyIndex*2] = PolyMaterialID;
pDIndex[Faces_A1] = Vertex_A;
pDIndex[Faces_B1] = Vertex_B;
pDIndex[Faces_C1] = Vertex_D;
pDAttrib[PloyIndex*2] = PolyMaterialID;
pwIndices[Faces_A1] = WORD(Vertex_A);
pwIndices[Faces_B1] = WORD(Vertex_B);
pwIndices[Faces_C1] = WORD(Vertex_D);
DWORD Faces_A2 = (PloyIndex*2+1)*3;
DWORD Faces_B2 = Faces_A2 + 1;
DWORD Faces_C2 = Faces_B2 + 1;
pIndex[Faces_A2] = Vertex_D;
pIndex[Faces_B2] = Vertex_B;
pIndex[Faces_C2] = Vertex_C;
pAttrib[PloyIndex*2+1] = PolyMaterialID;
pDIndex[Faces_A2] = Vertex_D;
pDIndex[Faces_B2] = Vertex_B;
pDIndex[Faces_C2] = Vertex_C;
pDAttrib[PloyIndex*2+1] = PolyMaterialID;
pwIndices[Faces_A2] = WORD(Vertex_D);
pwIndices[Faces_B2] = WORD(Vertex_B);
pwIndices[Faces_C2] = WORD(Vertex_C);
}
}
D3DXComputeBoundingBox((D3DXVECTOR3*)pVers,m_dNumVertices,sizeof(VFormat::FACES_NORMAL_TEXTURE1),
&m_BBox_A,&m_BBox_B);
D3DXComputeBoundingBox((D3DXVECTOR3*)pDVers,m_dNumVertices,sizeof(VFormat::FACES_NORMAL_TEXTURE1),
&m_BBox_A,&m_BBox_B);
if (FAILED(pMesh->UnlockVertexBuffer()))
return E_FAIL;
if (FAILED(pMesh->UnlockIndexBuffer()))
return E_FAIL;
if (FAILED(pMesh->UnlockAttributeBuffer()))
return E_FAIL;
if (FAILED(pDMesh->UnlockVertexBuffer()))
return E_FAIL;
if (FAILED(pDMesh->UnlockIndexBuffer()))
return E_FAIL;
if (FAILED(pDMesh->UnlockAttributeBuffer()))
return E_FAIL;
if (FAILED(m_pibIndices->Unlock()))
return E_FAIL;
m_pWaterUp = pMesh;
m_pWaterDn = pDMesh;
//水面网格的材质
m_dNumMaterial = 1;
m_lpMaterial = new MATERIAL[m_dNumMaterial];
ZeroMemory(m_lpMaterial,sizeof(MATERIAL)*m_dNumMaterial);
DWORD Def_Option = MATERIAL_OPTION_ZBUFFER_TRUE|
MATERIAL_OPTION_FILL_SOLID|
MATERIAL_OPTION_SHADE_GOURAUD|
MATERIAL_OPTION_CULL_NONE|
MATERIAL_OPTION_SPECULARENABLE;
for(DWORD i=0;i<m_dNumMaterial;i++)
{
m_lpMaterial[i].m_sMaterial9.Diffuse.r = 0.7f ;
m_lpMaterial[i].m_sMaterial9.Diffuse.g = 0.7f ;
m_lpMaterial[i].m_sMaterial9.Diffuse.b = 0.7f ;
m_lpMaterial[i].m_sMaterial9.Diffuse.a = 1.0f ;
m_lpMaterial[i].m_sMaterial9.Ambient = m_lpMaterial[i].m_sMaterial9.Diffuse;
m_lpMaterial[i].m_sMaterial9.Specular = m_lpMaterial[i].m_sMaterial9.Diffuse;
m_lpMaterial[i].m_sMaterial9.Power = 15;
m_lpMaterial[i].m_dOption = Def_Option;
}
TCHAR Name[256];
wsprintf(Name,"%s\\Water.Mtl",g_Def_ModelDirectory);
LoadMaterial(Name);
//天空盒的纹理
wsprintf(Name,"%s\\%s",g_Def_AppDirectory,"Textures\\LobbyCube.dds");
if( FAILED( hr = D3DXCreateCubeTextureFromFile( g_pd3dDevice,Name, &m_pSkyCubeTex ) ) )
return hr;
//水面的纹理
wsprintf(Name,"%s\\%s",g_Def_AppDirectory,"Textures\\Water.bmp");
if( FAILED( hr = D3DXCreateTextureFromFileEx(g_pd3dDevice, Name, D3DX_DEFAULT, D3DX_DEFAULT,
D3DX_DEFAULT, 0, D3DFMT_UNKNOWN, D3DPOOL_MANAGED, D3DX_DEFAULT,
D3DX_DEFAULT, 0, NULL, NULL, &m_pWaterTex) ))
return hr;
/*
// Effect
wsprintf(Name,"%s\\%s",g_Def_AppDirectory,"water.fx");
if(FAILED(hr = D3DXCreateEffectFromFile(g_pd3dDevice, Name, NULL, NULL, 0, NULL, &m_pEffect, NULL)))
return hr;
m_pEffect->OnResetDevice();
m_pEffect->SetTexture("tFLR", m_pWaterTex);
m_pEffect->SetTexture("tENV", m_pSkyCubeTex);
*/
//创建水面bump纹理
if( FAILED( InitBumpMap() ) )
return E_FAIL;
// m_pEffect->SetTexture("tBump", m_pBumpMapTexture);
WSea.Initialize(m_dwNumPoly_X,m_dwNumPoly_Z);
Water.Initialize(m_pWaterUp,m_dwNumPoly_X,m_dwNumPoly_Z); //初始化水纹
Water.Drop(); //产生水纹
Ripple.Initialize(m_pWaterUp,m_dwNumPoly_X,m_dwNumPoly_Z); //初始化涟漪纹
return S_OK;
}
//-----------------------------------------------------------------------------
// Desc: 在这里是调用了成员函数 GenerateGameSkinMesh(pMeshContainer);
// 是在这里加载了蒙皮信息
//-----------------------------------------------------------------------------
HRESULT DexAllocateHierarchy::CreateMeshContainer(LPCSTR Name,
CONST D3DXMESHDATA *pMeshData,
CONST D3DXMATERIAL *pMaterials,
CONST D3DXEFFECTINSTANCE *pEffectInstances,
DWORD NumMaterials,
CONST DWORD *pAdjacency,
LPD3DXSKININFO pSkinInfo,
LPD3DXMESHCONTAINER *ppNewMeshContainer)
{
HRESULT hr;
stDexMeshContainerEx *pMeshContainer = NULL;
LPDIRECT3DDEVICE9 device = NULL;
UINT NumFaces;
UINT iMaterial;
UINT iBone, cBones;
LPD3DXMESH pMesh = NULL;
*ppNewMeshContainer = NULL;
// this sample does not handle patch meshes, so fail when one is found
if (pMeshData->Type != D3DXMESHTYPE_MESH)
{
hr = E_FAIL;
return hr;
}
// get the pMesh interface pointer out of the mesh data structure
pMesh = pMeshData->pMesh;
pMesh->GetDevice( &device );
// this sample does not FVF compatible meshes, so fail when one is found
if (pMesh->GetFVF() == 0)
{
hr = E_FAIL;
return hr;
}
// allocate the overloaded structure to return as a D3DXMESHCONTAINER
pMeshContainer = new stDexMeshContainerEx;
if (pMeshContainer == NULL)
{
hr = E_OUTOFMEMORY;
return hr;
}
memset(pMeshContainer, 0, sizeof(stDexMeshContainerEx));
// make sure and copy the name. All memory as input belongs to caller, interfaces can be addref'd though
hr = AllocateName(Name, &pMeshContainer->Name);
if (FAILED(hr))
{
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
NumFaces = pMesh->GetNumFaces();
// if no normals are in the mesh, add them
if (!(pMesh->GetFVF() & D3DFVF_NORMAL))
{
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
// clone the mesh to make room for the normals
hr = pMesh->CloneMeshFVF( pMesh->GetOptions(),
pMesh->GetFVF() | D3DFVF_NORMAL,
device, &pMeshContainer->MeshData.pMesh );
if (FAILED(hr))
{
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
// get the new pMesh pointer back out of the mesh container to use
// NOTE: we do not release pMesh because we do not have a reference to it yet
pMesh = pMeshContainer->MeshData.pMesh;
// now generate the normals for the pmesh
D3DXComputeNormals( pMesh, NULL );
}
else // if no normals, just add a reference to the mesh for the mesh container
{
pMeshContainer->MeshData.pMesh = pMesh;
pMeshContainer->MeshData.Type = D3DXMESHTYPE_MESH;
pMesh->AddRef();
}
// allocate memory to contain the material information. This sample uses
// the D3D9 materials and texture names instead of the EffectInstance style materials
pMeshContainer->NumMaterials = max(1, NumMaterials);
pMeshContainer->pMaterials = new D3DXMATERIAL[pMeshContainer->NumMaterials];
pMeshContainer->ppTextures = new LPDIRECT3DTEXTURE9[pMeshContainer->NumMaterials];
pMeshContainer->pAdjacency = new DWORD[NumFaces*3];
if ((pMeshContainer->pAdjacency == NULL) || (pMeshContainer->pMaterials == NULL))
{
hr = E_OUTOFMEMORY;
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
memcpy(pMeshContainer->pAdjacency, pAdjacency, sizeof(DWORD) * NumFaces*3);
memset(pMeshContainer->ppTextures, 0, sizeof(LPDIRECT3DTEXTURE9) * pMeshContainer->NumMaterials);
// if materials provided, copy them
if (NumMaterials > 0)
{
memcpy(pMeshContainer->pMaterials, pMaterials, sizeof(D3DXMATERIAL) * NumMaterials);
for (iMaterial = 0; iMaterial < NumMaterials; iMaterial++)
{
if (pMeshContainer->pMaterials[iMaterial].pTextureFilename != NULL)
{
//TCHAR file[1000];
//FindMediaFile(file,pMeshContainer->pMaterials[iMaterial].pTextureFilename);
// 根据纹理的文件名创建纹理资源，如果创建失败，纹理指针必须赋成NULL
// MessageNULL(file);
//D3DXCreateTextureFromFileEx(device, file,
// D3DX_DEFAULT_NONPOW2,
// D3DX_DEFAULT_NONPOW2,
// D3DX_FROM_FILE, 0, D3DFMT_UNKNOWN, D3DPOOL_MANAGED,
// D3DX_FILTER_NONE, D3DX_FILTER_NONE, D3DCOLOR_XRGB(0,0,0), NULL, NULL,
// &pMeshContainer->ppTextures[iMaterial]);
string texname = "model/"; //轉到model文件夾中去找紋理
texname += pMeshContainer->pMaterials[iMaterial].pTextureFilename;
if( FAILED( D3DXCreateTextureFromFile( device, texname.c_str(),
&pMeshContainer->ppTextures[iMaterial] ) ) )
{
getLog()->BeginLog();
getLog()->Log(log_allert, "load model texture %s failed! \n", texname.c_str());
pMeshContainer->ppTextures[iMaterial] = NULL;
getLog()->EndLog();
}
// don't remember a pointer into the dynamic memory, just forget the name after loading
pMeshContainer->pMaterials[iMaterial].pTextureFilename = NULL;
}
}
}
else // if no materials provided, use a default one
{
pMeshContainer->pMaterials[0].pTextureFilename = NULL;
memset(&pMeshContainer->pMaterials[0].MatD3D, 0, sizeof(D3DMATERIAL9));
pMeshContainer->pMaterials[0].MatD3D.Diffuse.r = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.g = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Diffuse.b = 0.5f;
pMeshContainer->pMaterials[0].MatD3D.Specular = pMeshContainer->pMaterials[0].MatD3D.Diffuse;
}
// if there is skinning information, save off the required data and then setup for HW skinning
if (pSkinInfo != NULL)
{
// first save off the SkinInfo and original mesh data
pMeshContainer->pSkinInfo = pSkinInfo;
pSkinInfo->AddRef();
pMeshContainer->pOrigMesh = pMesh;
pMesh->AddRef();
// Will need an array of offset matrices to move the vertices from the figure space to the bone's space
cBones = pSkinInfo->GetNumBones();
pMeshContainer->pBoneOffsetMatrices = new D3DXMATRIX[cBones];
if (pMeshContainer->pBoneOffsetMatrices == NULL)
{
hr = E_OUTOFMEMORY;
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
// get each of the bone offset matrices so that we don't need to get them later
for (iBone = 0; iBone < cBones; iBone++)
{
pMeshContainer->pBoneOffsetMatrices[iBone] = *(pMeshContainer->pSkinInfo->GetBoneOffsetMatrix(iBone));
}
// GenerateGameSkinMesh will take the general skinning information and transform it to a HW friendly version
hr = GenerateGameSkinMesh(device, pMeshContainer );
if (FAILED(hr))
{
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
}
*ppNewMeshContainer = pMeshContainer;
pMeshContainer = NULL;
// call Destroy function to properly clean up the memory allocated
if (pMeshContainer != NULL)
{
DestroyMeshContainer(pMeshContainer);
}
return hr;
}
HRESULT InitGeometry()
{
LPD3DXBUFFER pD3DXMtrlBuffer;
if ( FAILED( D3DXLoadMeshFromX( L"./Resource/girl.x", D3DXMESH_SYSTEMMEM, g_pd3dDevice,
NULL, &pD3DXMtrlBuffer, NULL, &g_dwNumMaterials, &g_pMesh ) ) )
{
MessageBox( NULL, L"Could not find girl.x", L"D3D Tutorial", MB_OK );
return E_FAIL;
}
D3DXMATERIAL* d3dxMaterials = (D3DXMATERIAL*)pD3DXMtrlBuffer->GetBufferPointer();
g_pMeshMaterials = new D3DMATERIAL9[g_dwNumMaterials];
if ( g_pMeshMaterials == NULL )
{
return E_OUTOFMEMORY;
}
g_pMeshTextures = new LPDIRECT3DTEXTURE9[g_dwNumMaterials];
if ( g_pMeshTextures == NULL )
{
return E_OUTOFMEMORY;
}
if ( !( g_pMesh->GetFVF() & D3DFVF_NORMAL ) )
{
//가지고 있지 않다면 메쉬를 복제하고 D3DFVF_NORMAL을 추가한다.
ID3DXMesh* pTempMesh = 0;
g_pMesh->CloneMeshFVF( D3DXMESH_MANAGED, g_pMesh->GetFVF() | D3DFVF_NORMAL, g_pd3dDevice, &pTempMesh );
// 법선을 계산한다.
D3DXComputeNormals( pTempMesh, 0 );
g_pMesh->Release(); // 기존메쉬를 제거한다
g_pMesh = pTempMesh; // 기존메쉬를 법선이 계산된 메쉬로 지정한다.
}
for ( DWORD i = 0; i < g_dwNumMaterials; ++i )
{
g_pMeshMaterials[i] = d3dxMaterials[i].MatD3D;
g_pMeshMaterials[i].Ambient = g_pMeshMaterials[i].Diffuse;
g_pMeshTextures[i] = NULL;
if ( d3dxMaterials[i].pTextureFilename != NULL &&
lstrlenA( d3dxMaterials[i].pTextureFilename ) > 0 )
{
if ( FAILED( D3DXCreateTextureFromFileA( g_pd3dDevice,
d3dxMaterials[i].pTextureFilename, &g_pMeshTextures[i] ) ) )
{
const CHAR* strPrefix = "./Resource/";
CHAR strTexture[MAX_PATH];
strcpy_s( strTexture, MAX_PATH, strPrefix );
strcat_s( strTexture, MAX_PATH, d3dxMaterials[i].pTextureFilename );
if ( FAILED( D3DXCreateTextureFromFileA( g_pd3dDevice, strTexture, &g_pMeshTextures[i] ) ) )
{
MessageBox( NULL, L"Could not find texture map", L"D3D Tutorial", MB_OK );
}
}
}
}
pD3DXMtrlBuffer->Release();
return S_OK;
}
HRESULT KG3DMesh::CreateBspFile()
{
HRESULT hrResult = E_FAIL;
HRESULT hrRetCode = E_FAIL;
int nRetCode = false;
TCHAR szBSPPathName[MAX_PATH];
void *pvVerticesBuffer = NULL;
WORD* pIndexBuffer = NULL;
D3DXVECTOR3 *pPos = NULL;
DWORD *pdwFaceIndex = NULL;
DWORD dwStride = 0;
DWORD i = 0;
DWORD dwNumFaces = 0;
DWORD dwNumVertices = 0;
DWORD dwStartTime = timeGetTime();
LPD3DXMESH piMesh = m_ppMeshes[SMBT_NORMAL];
KG3DBsp *pBSP = NULL;
KGLOG_PROCESS_ERROR(piMesh);
dwStride = piMesh->GetNumBytesPerVertex();
dwNumVertices = piMesh->GetNumVertices();
dwNumFaces = piMesh->GetNumFaces();
KG_PROCESS_SUCCESS(dwNumFaces < 256);
pPos = new D3DXVECTOR3[dwNumVertices];
KG_ASSERT_EXIT(pPos);
pdwFaceIndex = new DWORD[dwNumFaces * 3];
KG_ASSERT_EXIT(pdwFaceIndex);
hrRetCode = piMesh->LockVertexBuffer(D3DLOCK_READONLY, (void **)&pvVerticesBuffer);
KGLOG_COM_PROCESS_ERROR(hrRetCode);
hrRetCode = piMesh->LockIndexBuffer(D3DLOCK_READONLY, (void **)&pIndexBuffer);
KGLOG_COM_PROCESS_ERROR(hrRetCode);
for (i = 0; i < dwNumVertices; ++i)
{
pPos[i] = *(D3DXVECTOR3 *)(((BYTE *)pvVerticesBuffer) + dwStride * i);
}
for (i = 0; i < dwNumFaces * 3; ++i)
{
pdwFaceIndex[i] = pIndexBuffer[i];
}
// -------------------------- create BSP --------------------------
hrRetCode = ChangePathExtName(m_scName.c_str(), "bsp", sizeof(szBSPPathName), szBSPPathName);
KGLOG_COM_PROCESS_ERROR(hrRetCode);
pBSP = new KG3DBsp;
KGLOG_PROCESS_ERROR(pBSP);
hrRetCode = pBSP->CreateFromMesh(dwNumVertices, dwNumFaces, pPos, pdwFaceIndex);
KGLOG_COM_PROCESS_ERROR(hrRetCode);
hrRetCode = pBSP->SaveToFile(szBSPPathName);
KGLOG_COM_PROCESS_ERROR(hrRetCode);
DWORD dwCost = timeGetTime() - dwStartTime;
if(dwCost > 500)
{
KGLogPrintf(
KGLOG_WARNING, "BSP %d %d Face %s",
dwCost, dwNumFaces, szBSPPathName
);
}
KG_DELETE(m_lpBsp); // recreate
m_lpBsp = pBSP;
pBSP = NULL;
Exit1:
hrResult = S_OK;
Exit0:
KG_DELETE(pBSP);
if (pIndexBuffer)
{
piMesh->UnlockIndexBuffer();
pIndexBuffer = NULL;
}
if (pvVerticesBuffer)
{
piMesh->UnlockVertexBuffer();
pvVerticesBuffer = NULL;
}
KG_DELETE_ARRAY(pdwFaceIndex);
KG_DELETE_ARRAY(pPos);
if(FAILED(hrResult))
{
KGLogPrintf(KGLOG_ERR, "%s 创建失败", szBSPPathName);
}
return hrResult;
}
void CreateBox( const float &w, const float &h, const float &d, const bool ¢erWidth, const bool ¢erHeight, const bool ¢erDepth, LPD3DXMESH &mesh )
{
float offsetX = 0, offsetY = 0, offsetZ = 0;
if( centerWidth )
offsetX = -w / 2.f;
if( centerHeight )
offsetY = -h / 2.f;
if( centerDepth )
offsetZ = -d / 2.f;
std::vector<DWORD> vIB;
std::vector<VERTEX3> vVB;
std::vector<DWORD> vAB;
DWORD offset = 0;
// fill in the front face index data
vIB.push_back( 0 + offset );
vIB.push_back( 1 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 0 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 3 + offset );
// fill in the front face vertex data
vVB.push_back( VERTEX3( 0.f + offsetX, 0.f + offsetY, 0.f + offsetZ, 0.f, 0.f, -1.f, 0.f, 1.f ) );
vVB.push_back( VERTEX3( 0.f + offsetX, h + offsetY, 0.f + offsetZ, 0.f, 0.f, -1.f, 0.f, 0.f ) );
vVB.push_back( VERTEX3( w + offsetX, h + offsetY, 0.f + offsetZ, 0.f, 0.f, -1.f, 1.f, 0.f ) );
vVB.push_back( VERTEX3( w + offsetX, 0.f + offsetY, 0.f + offsetZ, 0.f, 0.f, -1.f, 1.f, 1.f ) );
vAB.push_back( 0 );
vAB.push_back( 0 );
offset += 4;
// fill in the back face index data
vIB.push_back( 0 + offset );
vIB.push_back( 1 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 0 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 3 + offset );
// fill in the back face vertex data
vVB.push_back( VERTEX3( 0.f + offsetX, 0.f + offsetY, d + offsetZ, 0.f, 0.f, 1.f, 1.f, 1.f ) );
vVB.push_back( VERTEX3( w + offsetX, 0.f + offsetY, d + offsetZ, 0.f, 0.f, 1.f, 0.f, 1.f ) );
vVB.push_back( VERTEX3( w + offsetX, h + offsetY, d + offsetZ, 0.f, 0.f, 1.f, 0.f, 0.f ) );
vVB.push_back( VERTEX3( 0.f + offsetX, h + offsetY, d + offsetZ, 0.f, 0.f, 1.f, 1.f, 0.f ) );
vAB.push_back( 1 );
vAB.push_back( 1 );
offset += 4;
// fill in the top face index data
vIB.push_back( 0 + offset );
vIB.push_back( 1 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 0 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 3 + offset );
//fill in the top face vertex data
vVB.push_back( VERTEX3( 0.f + offsetX, h + offsetY, 0.f + offsetZ, 0.f, 1.f, 0.f, 0.f, 1.f ) );
vVB.push_back( VERTEX3( 0.f + offsetX, h + offsetY, d + offsetZ, 0.f, 1.f, 0.f, 0.f, 0.f ) );
vVB.push_back( VERTEX3( w + offsetX, h + offsetY, d + offsetZ, 0.f, 1.f, 0.f, 1.f, 0.f ) );
vVB.push_back( VERTEX3( w + offsetX, h + offsetY, 0.f + offsetZ, 0.f, 1.f, 0.f, 1.f, 1.f ) );
vAB.push_back( 2 );
vAB.push_back( 2 );
offset += 4;
// fill in the bottom face index data
vIB.push_back( 0 + offset );
vIB.push_back( 1 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 0 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 3 + offset );
// fill in the bottom face vertex data
vVB.push_back( VERTEX3( 0.f + offsetX, 0.f + offsetY, 0.f + offsetZ, 0.f, -1.f, 0.f, 0.f, 1.f ) );
vVB.push_back( VERTEX3( w + offsetX, 0.f + offsetY, 0.f + offsetZ, 0.f, -1.f, 0.f, 0.f, 0.f ) );
vVB.push_back( VERTEX3( w + offsetX, 0.f + offsetY, d + offsetZ, 0.f, -1.f, 0.f, 1.f, 0.f ) );
vVB.push_back( VERTEX3( 0.f + offsetX, 0.f + offsetY, d + offsetZ, 0.f, -1.f, 0.f, 1.f, 1.f ) );
vAB.push_back( 3 );
vAB.push_back( 3 );
offset += 4;
// fill in the left face index data
vIB.push_back( 0 + offset );
vIB.push_back( 1 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 0 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 3 + offset );
// fill in the left face vertex data
vVB.push_back( VERTEX3( 0.f + offsetX, 0.f + offsetY, d + offsetZ, -1.f, 0.f, 0.f, 0.f, 1.f ) );
vVB.push_back( VERTEX3( 0.f + offsetX, h + offsetY, d + offsetZ, -1.f, 0.f, 0.f, 0.f, 0.f ) );
vVB.push_back( VERTEX3( 0.f + offsetX, h + offsetY, 0.f + offsetZ, -1.f, 0.f, 0.f, 1.f, 0.f ) );
vVB.push_back( VERTEX3( 0.f + offsetX, 0.f + offsetY, 0.f + offsetZ, -1.f, 0.f, 0.f, 1.f, 1.f ) );
vAB.push_back( 4 );
vAB.push_back( 4 );
offset += 4;
// fill in the right face index data
vIB.push_back( 0 + offset );
vIB.push_back( 1 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 0 + offset );
vIB.push_back( 2 + offset );
vIB.push_back( 3 + offset );
// fill in the right face vertex data
vVB.push_back( VERTEX3( w + offsetX, 0.f + offsetY, 0.f + offsetZ, 1.f, 0.f, 0.f, 0.f, 1.f ) );
vVB.push_back( VERTEX3( w + offsetX, h + offsetY, 0.f + offsetZ, 1.f, 0.f, 0.f, 0.f, 0.f ) );
vVB.push_back( VERTEX3( w + offsetX, h + offsetY, d + offsetZ, 1.f, 0.f, 0.f, 1.f, 0.f ) );
vVB.push_back( VERTEX3( w + offsetX, 0.f + offsetY, d + offsetZ, 1.f, 0.f, 0.f, 1.f, 1.f ) );
vAB.push_back( 5 );
vAB.push_back( 5 );
offset += 4;
D3DXCreateMeshFVF( offset / 2, offset, D3DXMESH_MANAGED | D3DXMESH_32BIT, VERTEX3::FVF, g_pEngine->core->lpd3dd9, &mesh );
VERTEX3 *pVB = nullptr;
mesh->LockVertexBuffer( D3DLOCK_DISCARD, reinterpret_cast< void** >( &pVB ) );
copy( vVB.begin(), vVB.end(), pVB );
mesh->UnlockVertexBuffer();
DWORD *pIB = nullptr;
mesh->LockIndexBuffer( D3DLOCK_DISCARD, reinterpret_cast< void** >( &pIB ) );
copy( vIB.begin(), vIB.end(), pIB );
mesh->UnlockIndexBuffer();
DWORD *pAB = nullptr;
mesh->LockAttributeBuffer( D3DLOCK_DISCARD, &pAB );
copy( vAB.begin(), vAB.end(), pAB );
mesh->UnlockAttributeBuffer();
std::vector<DWORD> adjacencyBuffer( mesh->GetNumFaces() * 3 );
mesh->GenerateAdjacency( 0.f, &adjacencyBuffer[ 0 ] );
mesh->OptimizeInplace( D3DXMESHOPT_COMPACT | D3DXMESHOPT_ATTRSORT | D3DXMESHOPT_VERTEXCACHE, &adjacencyBuffer[ 0 ], nullptr, nullptr, nullptr );
}
//メッシュコンテナ描画
void Dx_Graphics3D::DrawMeshContainer(LPD3DXMESHCONTAINER pMeshContainer, LPD3DXFRAME pFrame)
{
DxMeshContainer *mesh_container = (DxMeshContainer*)pMeshContainer;
DxFrame *frame = (DxFrame*)pFrame;
//
D3DMATERIAL9 mat;
LPDIRECT3DTEXTURE9 pTex=NULL;
//D3DXMESHDATA内のメッシュデータを抽出
LPD3DXMESH lpMesh = mesh_container->MeshData.pMesh;
//スキニング情報がない場合
if(pMeshContainer->pSkinInfo==NULL)
{
//デバイスにフレームのワールド行列を設置
this->device->SetTransform( D3DTS_WORLD, &frame->CombinedTransformationMatrix);
//メッシュ描画
for (DWORD i=0;i<mesh_container->NumMaterials;i++)
{
//マテリアル情報の取得
mat = mesh_container->pMaterials[i].MatD3D;
//テクスチャ情報の取得
pTex = mesh_container->ppTextures[i];
//メッシュサブセットを描画
this->DrawSubset(lpMesh,i,&mat,pTex);
}
}
//スキニング情報がある場合
else
{
D3DXMATRIX matId;
PBYTE pVerticesSrc;
PBYTE pVerticesDest;
//ボーン数を取得
DWORD NumBones = pMeshContainer->pSkinInfo->GetNumBones();
for( DWORD i = 0; i < NumBones; i++ ){
D3DXMatrixMultiply(
&mesh_container->pBoneMatrices[i],
&mesh_container->pBoneOffsetMatrices[i],
mesh_container->ppBoneMatrixPtrs[i]
);
}
//ワールド行列をクリア
D3DXMatrixIdentity(&matId);
this->device->SetTransform(D3DTS_WORLD, &matId);
//頂点バッファをロック
mesh_container->lpMesh->LockVertexBuffer( D3DLOCK_READONLY, (LPVOID*)&pVerticesSrc);
lpMesh->LockVertexBuffer( 0, (LPVOID*)&pVerticesDest);
//スキンメッシュ作成
mesh_container->pSkinInfo->UpdateSkinnedMesh( mesh_container->pBoneMatrices, NULL, pVerticesSrc, pVerticesDest);
//頂点バッファのロックを解除
mesh_container->lpMesh->UnlockVertexBuffer();
lpMesh->UnlockVertexBuffer();
//メッシュ描画
for(UINT i = 0;i<mesh_container->NumAttributeGroups;i++)
{
//メッシュサブセットの属性IDを取得
unsigned AttribId = mesh_container->pAttributeTable[i].AttribId;
//マテリアル情報を取得
mat = mesh_container->pMaterials[AttribId].MatD3D;
//テクスチャ情報を取得
pTex = mesh_container->ppTextures[AttribId];
//メッシュのサブセットを描画
this->DrawSubset(lpMesh,AttribId,&mat,pTex);
}
}
}
/**
*
* PRECONDITION: parameter EFacePosition _eSide must be either FACE_TOP, or FACE_BOTTOM.
*
* @author Rebeccah Cox
* @param EFacePosition _eSide - the side the flag is on, either top or bottom.
* @param int32 _iX - the position along the X axis.
* @param int32 _iY - the position along the Z axis (looks like the y axis when
* looking at the flag plate).
* @param ETeam _eTeam - team the flagplate belongs to.
* @param uint32 _uiTextureID
* @param uint32 _uiModelID
* @return bool - returns true if the initialisation was successful.
*/
bool
CFlagPlate::Initialise(EFacePosition _eSide, int32 _iX, int32 _iY, ETeam _eTeam, uint32 _uiModelID, uint32 _uiTextureID)
{
// Set the position and side member variables in CTile.
m_eFace = _eSide;
m_iX = _iX;
m_iY = _iY;
m_vec3Position = g_atUpRightDirectionVecs[_eSide].vec3Up * 22.5f;
m_vec3Position += g_atUpRightDirectionVecs[_eSide].vec3Right * ((_iX * 3.0f) - 21.0f);
m_vec3Position -= g_atUpRightDirectionVecs[_eSide].vec3Direction * ((_iY * 3.0f) - 21.0f);
// Set the world matrix using the vectors.
m_matWorld._11 = g_atUpRightDirectionVecs[_eSide].vec3Right.x;
m_matWorld._21 = g_atUpRightDirectionVecs[_eSide].vec3Up.x;
m_matWorld._31 = g_atUpRightDirectionVecs[_eSide].vec3Direction.x;
m_matWorld._12 = g_atUpRightDirectionVecs[_eSide].vec3Right.y;
m_matWorld._22 = g_atUpRightDirectionVecs[_eSide].vec3Up.y;
m_matWorld._32 = g_atUpRightDirectionVecs[_eSide].vec3Direction.y;
m_matWorld._13 = g_atUpRightDirectionVecs[_eSide].vec3Right.z;
m_matWorld._23 = g_atUpRightDirectionVecs[_eSide].vec3Up.z;
m_matWorld._33 = g_atUpRightDirectionVecs[_eSide].vec3Direction.z;
m_matWorld._41 = m_vec3Position.x;
m_matWorld._42 = m_vec3Position.y;
m_matWorld._43 = m_vec3Position.z;
m_bTraversable = true;
m_iModelID = _uiModelID;
m_iTextureID = _uiTextureID;
/*// Set the model ID
if(BAD_ID == _uiModelID)
{
m_iModelID = CModelManager::GetInstance().CreateModel("../../models/tile_flagplate.x");
}
// Set the texture ID
if(BAD_ID == _uiTextureID)
{
if(TEAM_GREEN == _eTeam)
{
m_iTextureID = CTextureManager::GetInstance().CreateTexture("../../textures/tile_flagTile_green.png");
}
else
{
m_iTextureID = CTextureManager::GetInstance().CreateTexture("../../textures/tile_flagTile_purple.png");
}
}*/
D3DXVECTOR3* pFirstVertex = 0;
LPD3DXMESH pMesh = CModelManager::GetInstance().GetModel(m_iModelID)->GetModel();
pMesh->LockVertexBuffer(0, (void**)&pFirstVertex);
D3DXComputeBoundingBox(pFirstVertex,
pMesh->GetNumVertices(),
pMesh->GetNumBytesPerVertex(),
&m_tOBB.m_vec3Min, &m_tOBB.m_vec3Max);
pMesh->UnlockVertexBuffer();
CEntity::Initialise();
return (true);
}
HRESULT D3DXMeshCreateDiamond( LPDIRECT3DDEVICE9 pDevice, DWORD dwFVF, DWORD dwOption, UINT uSlice
, FLOAT fRadius, FLOAT fUpperConeHeight, FLOAT fLowerConeHeight, LPD3DXMESH* pRet )
{
//创建上下各一棱锥的钻石型
_ASSERTE(fRadius > 0 && fUpperConeHeight >= 0 && fLowerConeHeight >= 0 && uSlice >= 3);
HRESULT hr = E_FAIL;
LPD3DXMESH pMesh = NULL;
KG_PROCESS_ERROR(NULL != pRet);
KG_PROCESS_ERROR(fRadius > 0 && fUpperConeHeight >= 0 && fLowerConeHeight >= 0 && uSlice >= 3);
{
UINT uNumVertices = uSlice + 2; //2是上下两个点
UINT uNumFaces = uSlice * 2;
_ASSERTE(IsMeshValidToBeCreated(dwOption, uNumVertices, uNumFaces * 3));
hr = D3DXCreateMeshFVF(uNumFaces, uNumVertices, dwOption, dwFVF, pDevice, &pMesh);
KG_COM_CHECK_ERROR(hr);
//点的分布是先填圆周的一圈，然后填上下两个点
{
D3DXMeshVertexEnumer vertexEnumer;
hr = D3DXMeshCreateVertexEnumer(pMesh, vertexEnumer);
KG_COM_PROCESS_ERROR(hr);
_ASSERTE(vertexEnumer.IsValid() && vertexEnumer.GetVertexCount() == uNumVertices);
float fAnglePerVertex = 2 * D3DX_PI /static_cast<FLOAT>(uSlice);
float fAngleRotate = D3DX_PI / 4.f; //把所有顶点旋转45度，这样子好些
//注意Angle是不可能超过cos和sin的值域的，不用检查了
for (UINT i = 0; i < vertexEnumer.GetVertexCount() - 2; ++i)
{
FLOAT fAngle = fAnglePerVertex * i;
D3DXVECTOR3 vTemp;
vTemp.x = fRadius * cosf(fAngle + fAngleRotate); //单位圆锥，最后再放缩，所以这里用1
vTemp.y = 0;
vTemp.z = fRadius * sinf(fAngle + fAngleRotate);
vertexEnumer.SetPos(i, vTemp);
}
_ASSERTE(vertexEnumer.GetVertexCount() > 2);
//填上上下两个点
UINT uTopPoint = vertexEnumer.GetVertexCount() - 2;
vertexEnumer.SetPos(uTopPoint, D3DXVECTOR3(0, fUpperConeHeight, 0));
UINT uBottomPoint = vertexEnumer.GetVertexCount() - 1;
vertexEnumer.SetPos(uBottomPoint, D3DXVECTOR3(0, -fLowerConeHeight, 0));
}
{
D3DXMeshIndexEnumer indexEnumer;
hr = D3DXMeshCreateIndexEnumer(pMesh, indexEnumer);
KG_COM_PROCESS_ERROR(hr);
_ASSERTE(indexEnumer.IsValid()&& indexEnumer.GetIndexCount() == 2 * uSlice * 3);
UINT uVertexCountInCircle = pMesh->GetNumVertices() - 2;
{
UINT uUpperFaceCount = uVertexCountInCircle;
DWORD uTopPointIndex = pMesh->GetNumVertices() - 2;
for (UINT uIt = 0, uIndexIndex = 0; uIt < uUpperFaceCount; ++uIt, uIndexIndex += 3)
{
indexEnumer.SetIndex(uIndexIndex, uIt);
indexEnumer.SetIndex(uIndexIndex + 1, uTopPointIndex);
indexEnumer.SetIndex(uIndexIndex + 2, (uIt + 1) % uVertexCountInCircle);
}
}
{
UINT uBottomFaceCount = uVertexCountInCircle;
UINT uUpperFaceCount = uVertexCountInCircle;
DWORD uBottomPointIndex = pMesh->GetNumVertices() - 1;
for (UINT uIt = 0, uIndexIndex = uUpperFaceCount * 3
; uIt < uBottomFaceCount; ++uIt, uIndexIndex += 3)
{
indexEnumer.SetIndex(uIndexIndex, uIt);
indexEnumer.SetIndex(uIndexIndex + 1, (uIt + 1) % uVertexCountInCircle);
indexEnumer.SetIndex(uIndexIndex + 2, uBottomPointIndex);
}
}
}
hr = D3DXMeshZeroMeshAttributes(pMesh);
}
_ASSERTE(NULL != pRet);
*pRet = pMesh;
return S_OK;
Exit0:
SAFE_RELEASE(pMesh);
return E_FAIL;
}
HRESULT D3DXMeshCreatePlane( LPDIRECT3DDEVICE9 pDevice, DWORD dwFVF, DWORD dwOption, UINT uXSlice, UINT uZSlice
, FLOAT fXLength, FLOAT fZLength, LPD3DXMESH* pRet )
{
HRESULT hr = E_FAIL;
LPD3DXMESH pMesh = NULL;
KG_PROCESS_ERROR(D3DFVF_XYZ & dwFVF);//不是XYZ型的Mesh无法自动处理
KG_PROCESS_ERROR(NULL != pRet);
KG_PROCESS_ERROR(uXSlice < 2048 && uZSlice < 2048 && _T("不能创建太大的Plane"));
{
DWORD dwVertexCountInXAxis = (uXSlice + 1);
DWORD dwVertexCountInZAxis = (uZSlice + 1);
DWORD dwVertexCount = dwVertexCountInXAxis * dwVertexCountInZAxis;
DWORD dwNumFaces = uXSlice * uZSlice;
_ASSERTE(IsMeshValidToBeCreated(dwOption, dwVertexCount, dwNumFaces * 3));
hr = D3DXCreateMeshFVF(dwNumFaces, dwVertexCount, dwOption, dwFVF, pDevice, &pMesh);
KG_COM_PROCESS_ERROR(hr);
_ASSERTE(sizeof(BYTE) == 1);
////填点,D3DXMeshVertexEnumer生命域
{
D3DXMeshVertexEnumer vertexEnumer;
hr = D3DXMeshCreateVertexEnumer(pMesh, vertexEnumer);
KG_COM_PROCESS_ERROR(hr);
FLOAT XSliceGap = fXLength / static_cast<FLOAT>(uXSlice);
FLOAT ZSliceGap = fZLength / static_cast<FLOAT>(uZSlice);
_ASSERTE(vertexEnumer.GetVertexCount() == dwVertexCount);
for (UINT i = 0; i < dwVertexCountInXAxis; ++i)
{
for (UINT j = 0; j < dwVertexCountInZAxis; ++j)
{
FLOAT xPos = i * XSliceGap;
FLOAT zPos = i * ZSliceGap;
UINT uIndex = i * dwVertexCountInXAxis + j;
vertexEnumer.SetPos(uIndex, D3DXVECTOR3(xPos, 0, zPos));
}
}
//把坐标填上
if (D3DFVF_TEX1 & dwFVF) //这个默认就是UV两个浮点的。如果用了D3DFVF_TEXCOORDn的话，位会变
{
D3DXMeshVertexTexCoordEnumer texEnumer;
hr = D3DXMeshCreateVertexTexCoordEnumer(vertexEnumer, texEnumer);
FLOAT xUGap = 1.f / static_cast<FLOAT>(uXSlice);
FLOAT zVGap = 1.f / static_cast<FLOAT>(uZSlice);
if (SUCCEEDED(hr))
{
_ASSERTE(2 == texEnumer.GetTexCoordSize());
for (UINT i = 0; i < dwVertexCountInXAxis; ++i)
{
for (UINT j = 0; j < dwVertexCountInZAxis; ++j)
{
UINT uIndex = i * dwVertexCountInXAxis + j;
texEnumer.GetTexCoord2(uIndex) = D3DXVECTOR2(xUGap * i, zVGap * j);
}
}
}
}
}////填点,D3DXMeshVertexEnumer生命域
//填Index
{
D3DXMeshIndexEnumer indexEnumer;
hr = D3DXMeshCreateIndexEnumer(pMesh, indexEnumer);
KG_COM_PROCESS_ERROR(hr);
if (! indexEnumer.Is32Bit())
{
KG_PROCESS_ERROR((pMesh->GetNumVertices() < SHRT_MAX) && _T("顶点数超过IndexBuffer的最大数"));
}
for (UINT i = 0; i < uXSlice; ++i)
{
for (UINT j = 0; j < uZSlice; ++j)
{
DWORD uLowerLeftVertexIndex = i * (uXSlice + 1) + j;
DWORD uLowerRightVertexIndex = uLowerLeftVertexIndex + 1;
DWORD uUpperLeftVertexIndex = uLowerLeftVertexIndex + (uXSlice + 1);
DWORD uUpperRightVertexIndex = uUpperLeftVertexIndex + 1;
UINT uRegionIndexBegin = (i * uXSlice + j) * 6;
indexEnumer.SetIndex(uRegionIndexBegin, uLowerLeftVertexIndex);
indexEnumer.SetIndex(uRegionIndexBegin + 1, uUpperLeftVertexIndex);
indexEnumer.SetIndex(uRegionIndexBegin + 2, uLowerRightVertexIndex);
indexEnumer.SetIndex(uRegionIndexBegin + 3, uLowerLeftVertexIndex);
indexEnumer.SetIndex(uRegionIndexBegin + 4, uUpperLeftVertexIndex);
indexEnumer.SetIndex(uRegionIndexBegin + 5, uUpperRightVertexIndex);
indexEnumer.SetIndex(uRegionIndexBegin + 6, uLowerRightVertexIndex);
}
}
}
//填Attribute
hr = D3DXMeshZeroMeshAttributes(pMesh);
_ASSERTE(NULL != pRet);
*pRet = pMesh;
return S_OK;
}
Exit0:
SAFE_RELEASE(pMesh);
return NULL;
return E_FAIL;
}
void ObjParser::Load(LPCSTR Filename, LPDIRECT3DDEVICE9 pDevice)
{
FILE* fileHandle = fopen(Filename, "r+");
if( fileHandle == NULL )
return;
char line[256];
D3DXVECTOR3 vec;
while( !feof(fileHandle) )//Foreach Line
{
fgets(line, 256, fileHandle);
#pragma region Line Read
switch(line[0])
{
case 'm':
{
LPCSTR name = new CHAR[256];
sscanf_s(line, "mtllib %s", name, 255);
ParseMaterial(name);
}
break;
case 'v'://Vertex Item
{
switch(line[1])
{
case ' '://Vertex
{
sscanf_s(line, "v %f %f %f", &vec.x, &vec.y, &vec.z );
Vertexs.push_back(vec);
mVertexsHT.push_back(NULL);//expand HashTable
}
break;
case 't'://Texture Coordinates
{
D3DXVECTOR3 tex;
sscanf_s(line, "vt %f %f %f", &vec.x, &vec.y, &vec.z);
Textures.push_back(vec);
}
break;
case 'n'://Normal
{
D3DXVECTOR3 nor;
sscanf_s(line, "vn %f %f %f", &vec.x, &vec.y, &vec.z );
Normals.push_back(vec);
}
break;
default:// Not supposed to happen
assert( false );
}
}
break;
case 'f'://Face Item
{
DWORD quadP[4];//Position Index quad
DWORD quadT[4];//Texture Index quad
DWORD quadN[4];//Normal Index quad
memset(quadP, -1, sizeof(DWORD)*4);
memset(quadT, -1, sizeof(DWORD)*4);
memset(quadN, -1, sizeof(DWORD)*4);
int size = strlen(line);
int barCount = std::count(line, line+size, '/');
int readed = 0;
//By default .obj file puts faces with CW winding
switch( barCount )
{
case 0:// tri/quad pos
{
if( m_Winding == VertexWinding::CCW )
readed = sscanf_s(line, "f %d %d %d %d", &quadP[3], &quadP[2], &quadP[1], &quadP[0] );
else
readed = sscanf_s(line, "f %d %d %d %d", &quadP[0], &quadP[1], &quadP[2], &quadP[3] );
assert( readed == 3 || readed == 4 );
}
break;
case 3:// tri pos/tex
{
if( m_Winding == VertexWinding::CCW )
readed = sscanf_s(line, "f %d/%d %d/%d %d/%d",
&quadP[2], &quadT[2],
&quadP[1], &quadT[1],
&quadP[0], &quadT[0]
);
else
readed = sscanf_s(line, "f %d/%d %d/%d %d/%d",
&quadP[0], quadT[0],
&quadP[1], quadT[1],
&quadP[2], quadT[2]
);
assert( readed == 6 );
readed /= 2;
}
break;
case 4:// quad pos/tex
{
if( m_Winding == VertexWinding::CCW )
readed = sscanf_s(line, "f %d/%d %d/%d %d/%d %d/%d",
&quadP[3], &quadT[3],
&quadP[2], &quadT[2],
&quadP[1], &quadT[1],
&quadP[0], &quadT[0]
);
else
readed = sscanf_s(line, "f %d/%d %d/%d %d/%d %d/%d",
&quadP[0], &quadT[0],
&quadP[1], &quadT[1],
&quadP[2], &quadT[2],
&quadP[3], &quadT[3]
);
assert( readed == 8 );
readed /= 2;
}
break;
case 6:// tri pos/tex/nor
{
if( m_Winding == VertexWinding::CCW )
readed = sscanf_s(line, "f %d/%d/%d %d/%d/%d %d/%d/%d",
&quadP[2], &quadT[2], &quadN[2],
&quadP[1], &quadT[1], &quadN[1],
&quadP[0], &quadT[0], &quadN[0]
);
else
readed = sscanf_s(line, "f %d/%d/%d %d/%d/%d %d/%d/%d",
&quadP[0], &quadT[0], &quadN[0],
&quadP[1], &quadT[1], &quadN[1],
&quadP[2], &quadT[2], &quadN[2]
);
assert( readed == 9 );
readed /= 3;
}
break;
case 8:// quad pos/tex/nor
{
if( m_Winding == VertexWinding::CCW )
readed = sscanf_s(line, "f %d/%d/%d %d/%d/%d %d/%d/%d %d/%d/%d",
&quadP[3], &quadT[3], &quadN[3],
&quadP[2], &quadT[2], &quadN[2],
&quadP[1], &quadT[1], &quadN[1],
&quadP[0], &quadT[0], &quadN[0]
);
else
readed = sscanf_s(line, "f %d/%d/%d %d/%d/%d %d/%d/%d %d/%d/%d",
&quadP[0], &quadT[0], &quadN[0],
&quadP[1], &quadT[1], &quadN[1],
&quadP[2], &quadT[2], &quadN[2],
&quadP[3], &quadT[3], &quadN[3]
);
assert( readed == 12 );
readed /= 3;
}
break;
default:// Not supposed to happen
assert( false );
}
//The indexs are in 1 Base, we transform to 0 Base
for( int i=0; i < 4 ; ++i )
{
quadP[i]--; quadT[i]--; quadN[i]--;
}
for(int j=0; j < 3 ; ++j)
{
VertexTextureNormal NewVertex;
NewVertex.SetPosition( Vertexs[quadP[j]] );
if( quadT[j] != (DWORD(-1)-1) )
NewVertex.SetTexture ( Textures[quadT[j]].x, Textures[quadT[j]].y );
if( quadN[j] != (DWORD(-1)-1) )
NewVertex.SetNormal ( Normals[quadN[j]] );
DWORD index = AddVertex(quadP[j], NewVertex);
mIndexs.push_back(index);
}
if( readed == 4 )// quad readed
{
quadP[1] = quadP[2]; quadT[1] = quadT[2]; quadN[1] = quadN[2];
quadP[2] = quadP[3]; quadT[2] = quadT[3]; quadN[1] = quadN[2];
for(int j=0; j < 3 ; ++j)
{
VertexTextureNormal NewVertex;
NewVertex.SetPosition( Vertexs[quadP[j]] );
if( quadT[j] != (DWORD(-1)-1) )
NewVertex.SetTexture ( Textures[quadT[j]].x, Textures[quadT[j]].y );
if( quadN[j] != (DWORD(-1)-1) )
NewVertex.SetNormal ( Normals[quadN[j]] );
DWORD index = AddVertex(quadP[j], NewVertex);
mIndexs.push_back(index);
}
}
}
break;
}
#pragma endregion
}
fclose(fileHandle);
DWORD FVF = NULL;
D3DVERTEXELEMENT9* pMeshVDeclaration = NULL;
int code = 0;
IdentifieLoadedFormat(FVF, pMeshVDeclaration, code);
if( code == 0 )
return;
//Setup Mesh with VertexDeclaration corresponding to the loaded data
LPD3DXMESH pMesh = NULL;
HRESULT hr = NULL;
int FacesCount = mIndexs.size()/3;
switch( m_VertexMetaFormat )
{
case VertexMetaFormat::VertexDeclaration:
{
if( FacesCount > 65535 )// if huge mesh, 32 bits face index
hr = D3DXCreateMesh(FacesCount, mVertexs.size(), D3DXMESH_32BIT | D3DXMESH_VB_SYSTEMMEM | D3DXMESH_IB_SYSTEMMEM | D3DXMESH_SYSTEMMEM ,
pMeshVDeclaration, pDevice, &pMesh);
else
hr = D3DXCreateMesh(FacesCount, mVertexs.size(), D3DXMESH_VB_SYSTEMMEM | D3DXMESH_IB_SYSTEMMEM | D3DXMESH_SYSTEMMEM ,
pMeshVDeclaration, pDevice, &pMesh);
}
break;
case VertexMetaFormat::FVF:
{
if( FacesCount > 65535 )// if huge mesh, 32 bits face index
hr = D3DXCreateMeshFVF(FacesCount, Vertexs.size(), D3DXMESH_32BIT | D3DXMESH_VB_SYSTEMMEM | D3DXMESH_IB_SYSTEMMEM | D3DXMESH_SYSTEMMEM ,
FVF, pDevice, &pMesh);
else
hr = D3DXCreateMeshFVF(FacesCount, Vertexs.size(), D3DXMESH_VB_SYSTEMMEM | D3DXMESH_IB_SYSTEMMEM | D3DXMESH_SYSTEMMEM ,
FVF, pDevice, &pMesh);
}
break;
default:
assert( false );
}
assert( !FAILED(hr) );
//Puts vertex data inside loadedData in the smallest format needed
//(not nesesarily VertexTextureNormal)
void* loadedData = NULL;
void* loadedIndex = NULL;
size_t size = 0;
//Pass to our vertex format
PutLoadedDataInVertexDeclarationFormat(loadedData,loadedIndex,size,code, FacesCount);
//Free Auxiliary Arrays
Vertexs.clear();
Textures.clear();
Normals.clear();
mVertexsHT.clear();
void* data = NULL;
//Loads the Vertex Buffer
if( FAILED(pMesh->LockVertexBuffer(NULL, &data)) )
return;
memcpy(data, loadedData, size*mVertexs.size());
pMesh->UnlockVertexBuffer();
//Loads the Index Buffer
if( FAILED(pMesh->LockIndexBuffer(NULL, &data)) )
return;
if( FacesCount > 65535 )
memcpy(data, loadedIndex, sizeof(DWORD)*mIndexs.size());
else
memcpy(data, loadedIndex, sizeof(WORD)*mIndexs.size());
pMesh->UnlockIndexBuffer();
//Free main Arrays
mVertexs.clear();
mIndexs.clear();
//Mesh data ready
m_RootMeshContainer = new D3DXMESHCONTAINER;
m_RootMeshContainer->MeshData.pMesh = pMesh;
return;
}
// 3D 물체등을 그린다.
void RenderScene()
{
// 뷰행렬 초기화.
D3DXMATRIXA16 matView;
// D3DXVECTOR3 vEyePt(0.0f, 0.0f, -200.0f);
D3DXVECTOR3 vEyePt(gWorldCameraPosition.x, gWorldCameraPosition.y, gWorldCameraPosition.z);
D3DXVECTOR3 vLookatPt(0.0f, 0.0f, 0.0f);
D3DXVECTOR3 vUpVec(0.0f, 1.0f, 0.0f);
D3DXMatrixLookAtLH(&matView, &vEyePt, &vLookatPt, &vUpVec);
// 투영행렬 초기화.
D3DXMATRIXA16 matProjection;
D3DXMatrixPerspectiveFovLH(&matProjection, FOV, ASPECT_RATIO, NEAR_PLANE, FAR_PLANE);
// 회전.
gRotationY += ((0.4f * PI) / 180.0f);
if (gRotationY > 2 * PI)
gRotationY -= 2 * PI;
// 월드행렬 초기화.
D3DXMATRIXA16 matWorld;
// D3DXMatrixIdentity(&matWorld);
D3DXMatrixRotationY(&matWorld, gRotationY);
// 월드_뷰_투영행렬
D3DXMATRIXA16 matWorldView;
D3DXMATRIXA16 matWorldViewProjection;
D3DXMatrixMultiply(&matWorldView, &matWorld, &matView);
D3DXMatrixMultiply(&matWorldViewProjection, &matWorldView, &matProjection);
// 쉐이더에 전달.
gpNormalMappingShader->SetMatrix("gWorldMatrix", &matWorld);
gpNormalMappingShader->SetMatrix("gWorldViewProjectionMatrix", &matWorldViewProjection);
gpNormalMappingShader->SetVector("gWorldLightPosition", &gWorldLightPosition);
gpNormalMappingShader->SetVector("gWorldCameraPosition", &gWorldCameraPosition);
gpNormalMappingShader->SetVector("gLightColor", &gLightColor);
gpNormalMappingShader->SetTexture("DiffuseMap_Tex", gpStoneDM);
gpNormalMappingShader->SetTexture("SpecularMap_Tex", gpStoneSM);
gpNormalMappingShader->SetTexture("NormalMap_Tex", gpStoneNM);
// 쉐이더 적용.
UINT numPasses = 0;
gpNormalMappingShader->Begin(&numPasses, NULL);
for (UINT i = 0; i < numPasses; ++i) {
gpNormalMappingShader->BeginPass(i);
gpSphere->DrawSubset(0);
gpNormalMappingShader->EndPass();
}
gpNormalMappingShader->End();
}
void Direct3DRender(HWND hwnd)
{
RECT formatRect;
GetClientRect(hwnd, &formatRect);
gPD3DDevice->Clear(0, nullptr, D3DCLEAR_TARGET | D3DCLEAR_ZBUFFER, D3DCOLOR_XRGB(0,0, 30), 1.0f, 0.0f);
gPD3DDevice->BeginScene();
MatrixSet();
WCHAR str[50];
int strCount = swprintf_s(str, _T("Mat, Mesh & Light!"));
gPFont->DrawTextW(nullptr, str, strCount, &formatRect, DT_TOP| DT_RIGHT, D3DCOLOR_XRGB(25, 134, 111));
D3DXMATRIX Ry;
D3DXMatrixRotationY(&Ry, timeGetTime() / 1000.0f);
D3DXMATRIX teaPotWorldTrans;
D3DXMatrixTranslation(&teaPotWorldTrans, 2.5f, 2.5f, 2.5f);
D3DXMATRIX Sa;
D3DXMatrixScaling(&Sa, 2.0f, 2.0f, 2.0f);
teaPotWorldTrans = teaPotWorldTrans * Ry * Sa;
gPD3DDevice->SetTransform(D3DTS_WORLD, &teaPotWorldTrans);
D3DMATERIAL9 material;
ZeroMemory(&material, sizeof(material));
material.Ambient = D3DXCOLOR(0.5f, 0.5f, 0.7f, 1.0f);
material.Diffuse = D3DXCOLOR(0.4f, 0.6f, 0.6f, 1.0f);
material.Specular = D3DXCOLOR(0.3f, 0.3f, 0.3f, 0.3f);
material.Emissive = D3DXCOLOR(0.3f, 0.0f, 0.1f, 1.0f);
gPD3DDevice->SetMaterial(&material);
gPTeapot->DrawSubset(0);
D3DXMATRIX boxWorldTrans;
D3DXMatrixTranslation(&boxWorldTrans, -5.0f, 5.0f, 5.0f);
boxWorldTrans *= Ry;
gPD3DDevice->SetTransform(D3DTS_WORLD, &boxWorldTrans);
ZeroMemory(&material, sizeof(material));
material.Ambient = D3DXCOLOR(0.3f, 0.1f, 0.5f, 1.0f);
material.Diffuse = D3DXCOLOR(0.4f, 0.6f, 0.6f, 1.0f);
material.Specular = D3DXCOLOR(0.3f, 0.3f, 0.3f, 1.3f);
material.Emissive = D3DXCOLOR(0.3f, 0.0f, 0.1f, 1.0f);
gPD3DDevice->SetMaterial(&material);
gPBox->DrawSubset(0);
D3DXMATRIX torusWorldTrans;
D3DXMatrixTranslation(&torusWorldTrans, 5.0f, -5.0f, 5.0f);
torusWorldTrans *= Ry;
gPD3DDevice->SetTransform(D3DTS_WORLD, &torusWorldTrans);
ZeroMemory(&material, sizeof(material));
material.Ambient = D3DXCOLOR(0.5f, 0.2f, 0.3f, 1.0f);
material.Diffuse = D3DXCOLOR(0.6f, 0.2f, 0.4f, 1.0f);
material.Specular = D3DXCOLOR(0.3f, 0.3f, 0.3f, 0.3f);
material.Emissive = D3DXCOLOR(0.3f, 0.0f, 0.1f, 1.0f);
gPD3DDevice->SetMaterial(&material);
gPTorus->DrawSubset(0);
D3DXMATRIX sphereWorldTrans;
D3DXMatrixTranslation(&sphereWorldTrans, -5.0f, -5.0f, 5.0f);
sphereWorldTrans *= Ry;
gPD3DDevice->SetTransform(D3DTS_WORLD, &sphereWorldTrans);
ZeroMemory(&material, sizeof(material));
material.Ambient = D3DXCOLOR(0.9f, 0.1f, 0.9f, 1.0f);
material.Diffuse = D3DXCOLOR(0.3f, 0.6f, 0.8f, 1.0f);
material.Specular = D3DXCOLOR(0.3f, 0.3f, 0.3f, 0.3f);
material.Emissive = D3DXCOLOR(0.9f, 0.4f, 0.7f, 1.0f);
gPD3DDevice->SetMaterial(&material);
gPSphere->DrawSubset(0);
LightSet(gPD3DDevice, 1);
gPD3DDevice->EndScene();
gPD3DDevice->Present(nullptr, nullptr, nullptr, nullptr);
}
HRESULT EVERYMODULE::DrawMesh(LPD3DXMESH newmesh, UINT EPointSize)
{
if(!Mesh)
return E_FAIL;
HRESULT att=S_OK;
LPDIRECT3DVERTEXBUFFER9 vertexbuffer;
LPDIRECT3DINDEXBUFFER9 indexbuffer;
if(newmesh==NULL)
{
if(CreateAttrib==1)
{
Mesh->GetVertexBuffer(&vertexbuffer);
d3ddevice->SetStreamSource(0, vertexbuffer, 0, EachPointSize);
if(VertexShader && Declaration)
{
d3ddevice->SetVertexDeclaration(Declaration);
d3ddevice->SetVertexShader(VertexShader);
}
else
{
// d3ddevice->SetVertexDeclaration(NULL);
d3ddevice->SetVertexShader(NULL);
d3ddevice->SetFVF(m_FVF);
}
d3ddevice->SetMaterial(&Material);
d3ddevice->BeginScene();
if(FAILED(d3ddevice->DrawPrimitive(D3DPT_TRIANGLESTRIP, 0, VertexNum-2)))
att=E_FAIL;
d3ddevice->EndScene();
}
else if(CreateAttrib==2)
{
Mesh->GetVertexBuffer(&vertexbuffer);
Mesh->GetIndexBuffer(&indexbuffer);
d3ddevice->SetStreamSource(0, vertexbuffer, 0, EachPointSize);
d3ddevice->SetIndices(indexbuffer);
if(VertexShader && Declaration)
{
d3ddevice->SetVertexDeclaration(Declaration);
d3ddevice->SetVertexShader(VertexShader);
}
else
{
// d3ddevice->SetVertexDeclaration(NULL);
d3ddevice->SetVertexShader(NULL);
d3ddevice->SetFVF(m_FVF);
}
d3ddevice->SetMaterial(&Material);
d3ddevice->BeginScene();
if(FAILED(d3ddevice->DrawIndexedPrimitive(D3DPT_TRIANGLELIST, 0, 0, VertexNum, 0, IndexVertexNum/3)))
att=E_FAIL;
d3ddevice->EndScene();
}
}
else
{
if(CreateAttrib==1)
{
newmesh->GetVertexBuffer(&vertexbuffer);
d3ddevice->SetStreamSource(0, vertexbuffer, 0, EPointSize);
if(VertexShader && Declaration)
{
d3ddevice->SetVertexDeclaration(Declaration);
d3ddevice->SetVertexShader(VertexShader);
}
else
{
// d3ddevice->SetVertexDeclaration(NULL);
d3ddevice->SetVertexShader(NULL);
d3ddevice->SetFVF(m_FVF);
}
d3ddevice->SetMaterial(&Material);
d3ddevice->BeginScene();
if(FAILED(d3ddevice->DrawPrimitive(D3DPT_TRIANGLESTRIP, 0, VertexNum-2)))
att=E_FAIL;
d3ddevice->EndScene();
}
else if(CreateAttrib==2)
{
newmesh->GetVertexBuffer(&vertexbuffer);
newmesh->GetIndexBuffer(&indexbuffer);
d3ddevice->SetStreamSource(0, vertexbuffer, 0, EPointSize);
d3ddevice->SetIndices(indexbuffer);
if(VertexShader && Declaration)
{
d3ddevice->SetVertexDeclaration(Declaration);
d3ddevice->SetVertexShader(VertexShader);
}
else
{
// d3ddevice->SetVertexDeclaration(NULL);
d3ddevice->SetVertexShader(NULL);
d3ddevice->SetFVF(m_FVF);
}
d3ddevice->SetMaterial(&Material);
d3ddevice->BeginScene();
if(FAILED(d3ddevice->DrawIndexedPrimitive(D3DPT_TRIANGLELIST, 0, 0, VertexNum, 0, IndexVertexNum/3)))
att=E_FAIL;
d3ddevice->EndScene();
}
}
return att;
}
void CALLBACK RenderFunc(void)
{
/**
* Set camera
* */
D3DMATRIX* pMatView = nullptr;
GD::CMatrix44<float> viewMat(gEnv.m_pCamera->GetViewMatrixDX());
pMatView = (D3DMATRIX*)(&viewMat);
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_VIEW, pMatView); //应用取景变换矩阵
D3DMATRIX* pProjMatrix;
pProjMatrix = (D3DMATRIX*)(&gEnv.m_pCamera->GetProjMatrix().GetFliped());
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_PROJECTION, pProjMatrix); //设置投影变换矩阵
D3DVIEWPORT9* pViewPort;
pViewPort = (D3DVIEWPORT9*)(&gEnv.m_pCamera->GetViewPort());
gEnv.m_pDXDevice->GetD3DDevice()->SetViewport(pViewPort); //视口的设置
WCHAR TempName[60] = L"当前显卡型号："; //定义一个临时字符串，且方便了把"当前显卡型号："字符串引入我们的目的字符串中
WCHAR adapterName[30]{0};
D3DADAPTER_IDENTIFIER9 Adapter; //定义一个D3DADAPTER_IDENTIFIER9结构体，用于存储显卡信息
LPDIRECT3D9 pD3D = NULL; //Direct3D接口对象的创建
if (NULL == (pD3D = Direct3DCreate9(D3D_SDK_VERSION))) //初始化Direct3D接口对象，并进行DirectX版本协商
{
return;
}
pD3D->GetAdapterIdentifier(0, 0, &Adapter);//调用GetAdapterIdentifier，获取显卡信息
int len = ::MultiByteToWideChar(CP_ACP, 0, Adapter.Description, -1, NULL, 0);//显卡名称现在已经在Adapter.Description中了，但是其为char类型，我们要将其转为wchar_t类型
::MultiByteToWideChar(CP_ACP, 0, Adapter.Description, -1, adapterName, len);//这步操作完成后，g_strAdapterName中就为当前我们的显卡类型名的wchar_t型字符串了
wcscat_s(TempName, adapterName);//把当前我们的显卡名加到“当前显卡型号：”字符串后面，结果存在TempName中
pD3D->Release();
gPFont->DrawText(nullptr, TempName, -1, nullptr, DT_TOP | DT_LEFT, D3DCOLOR_XRGB(124, 24, 222));
D3DXMATRIX W;
D3DXMatrixIdentity(&W);
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_WORLD, &W);
gEnv.m_pDXDevice->GetD3DDevice()->SetFVF(Vertex::FVF);
gEnv.m_pDXDevice->GetD3DDevice()->SetStreamSource(0, gPVertexBuffer, 0, sizeof(Vertex));
/**
* Draw floor
* */
gEnv.m_pDXDevice->GetD3DDevice()->SetMaterial(&gFloorMtrl);
gEnv.m_pDXDevice->GetD3DDevice()->SetTexture(0, gPFloorTex);
gEnv.m_pDXDevice->GetD3DDevice()->DrawPrimitive(D3DPT_TRIANGLELIST, 0, 2);
/**
* Draw wall
* */
gEnv.m_pDXDevice->GetD3DDevice()->SetMaterial(&gWallMtrl);
gEnv.m_pDXDevice->GetD3DDevice()->SetTexture(0, gPWallTex);
gEnv.m_pDXDevice->GetD3DDevice()->DrawPrimitive(D3DPT_TRIANGLELIST, 6, 4);
/**
* Draw mirror
* */
gEnv.m_pDXDevice->GetD3DDevice()->SetMaterial(&gMirrorMtrl);
gEnv.m_pDXDevice->GetD3DDevice()->SetTexture(0, gPMirrorTex);
gEnv.m_pDXDevice->GetD3DDevice()->DrawPrimitive(D3DPT_TRIANGLELIST, 18, 2);
// Set teapot position
static D3DXMATRIX T;
static float x = 0.0f;
static float y = 3.0f;
static float z = -7.5f;
const float delta = 0.01f;
// increase/decrease alpha via keyboard input
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_UPARROW))
{
y += delta;
}
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_DOWNARROW))
{
y -= delta;
}
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_LEFTARROW))
{
x += delta;
}
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_RIGHTARROW))
{
x -= delta;
}
//Draw teapot
D3DXMatrixTranslation(&T,
x,
y,
z);
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_WORLD, &T);
gEnv.m_pDXDevice->GetD3DDevice()->SetMaterial(&gTeapotMtrl);
gEnv.m_pDXDevice->GetD3DDevice()->SetTexture(0, 0);
gPTeapot->DrawSubset(0);
/**
* Enable stencil, disable write to z-buffer and back-buffer
* */
//Enable stencil, so that the mirror fragment which passed z-test's stencil are set to 0x01
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILENABLE, true);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILFUNC, D3DCMP_ALWAYS);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILREF, 0x01);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILMASK, 0xffffffff);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILWRITEMASK, 0xffffffff);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILZFAIL, D3DSTENCILOP_KEEP);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILFAIL, D3DSTENCILOP_KEEP);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILPASS, D3DSTENCILOP_REPLACE);
//Disable write to z-buffer, use blend to disable write to color-buffer
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_ZWRITEENABLE, false);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_ALPHABLENDENABLE, true);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_SRCBLEND, D3DBLEND_ZERO);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_DESTBLEND, D3DBLEND_ONE);
//Finished setting, draw mirror to stencil-buffer;
gEnv.m_pDXDevice->GetD3DDevice()->SetStreamSource(0, gPVertexBuffer, 0, sizeof(Vertex));
gEnv.m_pDXDevice->GetD3DDevice()->SetFVF(Vertex::FVF);
gEnv.m_pDXDevice->GetD3DDevice()->SetMaterial(&gMirrorMtrl);
gEnv.m_pDXDevice->GetD3DDevice()->SetTexture(0, gPMirrorTex);
D3DXMATRIX I;
D3DXMatrixIdentity(&I);
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_WORLD, &I);
gEnv.m_pDXDevice->GetD3DDevice()->DrawPrimitive(D3DPT_TRIANGLELIST, 18, 2);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_ZWRITEENABLE, true);
/**
* Then we need to use the modified stencil, disable z-test(why not disable z-test), and use blend to draw mirrored teapot
* */
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILFUNC, D3DCMP_EQUAL);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILPASS, D3DSTENCILOP_KEEP);
gEnv.m_pDXDevice->GetD3DDevice()->Clear(0, 0, D3DCLEAR_ZBUFFER, 0, 1.0f, 0);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_SRCBLEND, D3DBLEND_DESTCOLOR);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_DESTBLEND, D3DBLEND_ZERO);
D3DXMATRIX R;
D3DXPLANE plane(0.0f, 0.0f, 1.0f, 0.0f);
D3DXMatrixReflect(&R, &plane);
T = T*R;
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_WORLD, &T);
gEnv.m_pDXDevice->GetD3DDevice()->SetMaterial(&gTeapotMtrl);
gEnv.m_pDXDevice->GetD3DDevice()->SetTexture(0, 0);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_CULLMODE, D3DCULL_CW);
gPTeapot->DrawSubset(0);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_ALPHABLENDENABLE, false);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_STENCILENABLE, false);
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_CULLMODE, D3DCULL_CCW);
}
void CALLBACK RenderFunc(void)
{
/**
* Set camera
* */
D3DMATRIX* pMatView = nullptr;
GD::CMatrix44<float> viewMat(gEnv.m_pCamera->GetViewMatrixDX());
pMatView = (D3DMATRIX*)(&viewMat);
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_VIEW, pMatView); //应用取景变换矩阵
D3DMATRIX* pProjMatrix;
pProjMatrix = (D3DMATRIX*)(&gEnv.m_pCamera->GetProjMatrix().GetFliped());
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_PROJECTION, pProjMatrix); //设置投影变换矩阵
D3DVIEWPORT9* pViewPort;
pViewPort = (D3DVIEWPORT9*)(&gEnv.m_pCamera->GetViewPort());
gEnv.m_pDXDevice->GetD3DDevice()->SetViewport(pViewPort); //视口的设置
WCHAR TempName[60] = L"当前显卡型号："; //定义一个临时字符串，且方便了把"当前显卡型号："字符串引入我们的目的字符串中
WCHAR adapterName[30]{0};
D3DADAPTER_IDENTIFIER9 Adapter; //定义一个D3DADAPTER_IDENTIFIER9结构体，用于存储显卡信息
LPDIRECT3D9 pD3D = NULL; //Direct3D接口对象的创建
if (NULL == (pD3D = Direct3DCreate9(D3D_SDK_VERSION))) //初始化Direct3D接口对象，并进行DirectX版本协商
{
return;
}
pD3D->GetAdapterIdentifier(0, 0, &Adapter);//调用GetAdapterIdentifier，获取显卡信息
int len = ::MultiByteToWideChar(CP_ACP, 0, Adapter.Description, -1, NULL, 0);//显卡名称现在已经在Adapter.Description中了，但是其为char类型，我们要将其转为wchar_t类型
::MultiByteToWideChar(CP_ACP, 0, Adapter.Description, -1, adapterName, len);//这步操作完成后，g_strAdapterName中就为当前我们的显卡类型名的wchar_t型字符串了
wcscat_s(TempName, adapterName);//把当前我们的显卡名加到“当前显卡型号：”字符串后面，结果存在TempName中
pD3D->Release();
gPFont->DrawText(nullptr, TempName, -1, nullptr, DT_TOP | DT_LEFT, D3DCOLOR_XRGB(124, 24, 222));
// Set teapot position
static D3DXMATRIX T;
static float x = 0.0f;
static float y = 3.0f;
static float z = -7.5f;
const float delta = 0.01f;
// increase/decrease alpha via keyboard input
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_UPARROW))
{
y += delta;
}
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_DOWNARROW))
{
y -= delta;
}
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_LEFTARROW))
{
x += delta;
}
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_RIGHTARROW))
{
x -= delta;
}
//Draw teapot
D3DXMatrixTranslation(&T,
x,
y,
z);
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_WORLD, &T);
gEnv.m_pDXDevice->GetD3DDevice()->SetMaterial(&gTeapotMtrl);
gEnv.m_pDXDevice->GetD3DDevice()->SetTexture(0, 0);
gPTeapot->DrawSubset(0);
D3DXMatrixIdentity(&T);
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_WORLD, &T);
for (int i = 0; i < gAirplaneMtrl.size(); i++)
{
gEnv.m_pDXDevice->GetD3DDevice()->SetMaterial(&gAirplaneMtrl[i]);
gEnv.m_pDXDevice->GetD3DDevice()->SetTexture(0, gPAirplaneTex[i]);
gPAirplane->DrawSubset(i);
}
/**
* Change numFaces by pressing key Q E;
* */
int numFaces = gPPAirplane->GetNumFaces();
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_Q))
{
gPPAirplane->SetNumFaces(numFaces + 1);
//Need to add more than one face to invert an edge collapse transformation
if (gPPAirplane->GetNumFaces() == numFaces)
{
gPPAirplane->SetNumFaces(numFaces + 2);
}
}
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_E))
{
gPPAirplane->SetNumFaces(numFaces - 1);
//Need to add more than one face to invert an edge collapse transformation
if (gPPAirplane->GetNumFaces() == numFaces)
{
gPPAirplane->SetNumFaces(numFaces - 2);
}
}
/**
* Use key R to change fill mode:
* When pressed, will change between WIREFRAME/SOLID.
* */
static bool bFillMode = true;
if (bFillMode == true)
{
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_R))
{
bFillMode = false;
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_FILLMODE, D3DFILL_WIREFRAME);
}
else
{
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_FILLMODE, D3DFILL_SOLID);
}
}
else
{
if (gEnv.m_pKeyBoard->IsKeyDown(DIK_R))
{
bFillMode = true;
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_FILLMODE, D3DFILL_SOLID);
}
else
{
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_FILLMODE, D3DFILL_WIREFRAME);
}
}
D3DXMatrixTranslation(&T,
x,
y,
z);
gEnv.m_pDXDevice->GetD3DDevice()->SetTransform(D3DTS_WORLD, &T);
for (int i = 0; i < gAirplaneMtrl.size(); i++)
{
gEnv.m_pDXDevice->GetD3DDevice()->SetMaterial(&gAirplaneMtrl[i]);
gEnv.m_pDXDevice->GetD3DDevice()->SetTexture(0, gPAirplaneTex[i]);
gPPAirplane->DrawSubset(i);
}
gEnv.m_pDXDevice->GetD3DDevice()->SetRenderState(D3DRS_FILLMODE, D3DFILL_SOLID);
}
//------------------------------------------------------------------------------------------------
// Name: CreateTerrainMesh
// Desc:
//------------------------------------------------------------------------------------------------
bool CreateTerrainMesh(LPDIRECT3DDEVICE9 d3dDevice, LPD3DXMESH* terrainMesh)
{
// Calculate the number of faces and vertices required
const unsigned int faces = (TMS_COUNT + 3) * 2;
const unsigned int vertices = (TMS_COUNT + 3) * 4;
// The internal terrain mesh
LPD3DXMESH internalTerrainMesh;
// Create the mesh
HRESULT hr = D3DXCreateMeshFVF(faces, vertices, D3DXMESH_MANAGED, D3DFVF_GEOMETRYVERTEX, d3dDevice, &internalTerrainMesh);
if (APP_ERROR(FAILED(hr))("Unable to create the terrain mesh"))
return false;
// Lock the mesh buffers
GeometryVertex* lockedVertices = 0;
WORD* lockedIndices = 0;
DWORD* lockedAttributes = 0;
if (APP_ERROR(FAILED(internalTerrainMesh->LockAttributeBuffer(0, &lockedAttributes)) ||
FAILED(internalTerrainMesh->LockVertexBuffer(0, (VOID**)&lockedVertices)) ||
FAILED(internalTerrainMesh->LockIndexBuffer(0, (VOID**)&lockedIndices)))("Unable to lock terrain mesh"))
{
// Deallocate the mesh
SAFE_RELEASE(internalTerrainMesh);
// Exit the method
return false;
}
// Vertices that will be rotated 4x about Y at
// 90-degree intervals to produce the wall mesh
GeometryVertex wallSide[] = {
{ -0.5f, 0.0f, -0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f },
{ -0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f },
{ -0.5f, -1.0f, -0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f },
{ -0.5f, -1.0f, +0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f },
};
// The flat square with unit size
GeometryVertex flat[] = {
{ -0.5f, 0.0f, -0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f },
{ +0.5f, 0.0f, -0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f },
{ -0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f },
{ +0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f },
};
// Geometry template for the high-corner meshes,
// with the high corner in the north-west
GeometryVertex highCorner[] = {
{ -0.5f, +1.0f, -0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f },
{ +0.5f, 0.0f, -0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f },
{ -0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f },
{ +0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f },
};
// Geometry template for the low-corner meshes,
// with the low corner in the north-west
GeometryVertex lowCorner[] = {
{ -0.5f, -1.0f, -0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f },
{ +0.5f, 0.0f, -0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f },
{ -0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f },
{ +0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f },
};
// Geometry template for the high-side meshes,
// with the high side to the north
GeometryVertex highSide[] = {
{ -0.5f, +1.0f, -0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f },
{ +0.5f, +1.0f, -0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f },
{ -0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f },
{ +0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f },
};
// Geometry template for the low-corner meshes,
// with the low corner in the north-west
GeometryVertex raisedLowCorner[] = {
{ -0.5f, 0.0f, -0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f },
{ +0.5f, +1.0f, -0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f },
{ -0.5f, +1.0f, +0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f },
{ +0.5f, +1.0f, +0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f },
};
// Geometry template for the low-side meshes,
// with the low side to the north
GeometryVertex lowSide[] = {
{ -0.5f, -1.0f, -0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f },
{ +0.5f, -1.0f, -0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f },
{ -0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f },
{ +0.5f, 0.0f, +0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f },
};
// The subset that is currently being written
unsigned int currentSubset = TMS_WALL_SIDES;
// Copy the wall first--it does not have any texture rotations
lockedVertices = CopyYRotatedGeometry(lockedVertices, wallSide, 4, 0.0f * D3DX_PI / 2.0f);
lockedVertices = CopyYRotatedGeometry(lockedVertices, wallSide, 4, 1.0f * D3DX_PI / 2.0f);
lockedVertices = CopyYRotatedGeometry(lockedVertices, wallSide, 4, 2.0f * D3DX_PI / 2.0f);
lockedVertices = CopyYRotatedGeometry(lockedVertices, wallSide, 4, 3.0f * D3DX_PI / 2.0f);
// Copy four sets of squares
lockedIndices = PrintSquareIndices(lockedIndices, 0, 4);
lockedAttributes = PrintAttributes(lockedAttributes, currentSubset, 4);
// Move to the next subset
currentSubset++;
// Write the flat mesh first, since it only has texture rotations
for (unsigned int textureDirection = 0; textureDirection < 4; ++textureDirection, ++currentSubset)
{
SetTerrainTexcoords(flat, textureDirection);
lockedVertices = CopyYRotatedGeometry(lockedVertices, flat, 4, 0.0f);
lockedIndices = PrintSquareIndices(lockedIndices, 4 + currentSubset - 1, 1);
lockedAttributes = PrintAttributes(lockedAttributes, currentSubset, 1);
}
// Repeat for all combinations of texture direction and rotation for the remaining types
for (int type = 0; type < 5; ++type)
{
GeometryVertex* sourceGeometry;
switch(type)
{
case 0: sourceGeometry = highCorner; break;
case 1: sourceGeometry = lowCorner; break;
case 2: sourceGeometry = highSide; break;
case 3: sourceGeometry = raisedLowCorner; break;
case 4: sourceGeometry = lowSide; break;
}
// Repeat for all rotations
for (int rotation = 0; rotation < 4; ++rotation)
{
// Calculate the rotation angle
float rotationAngle = D3DX_PI / 2.0f * rotation;
// Repeat for all texture directions
for (unsigned int textureDirection = 0; textureDirection < 4; ++textureDirection, ++currentSubset)
{
// Reverse the rotation of the texture by the rotation of the element so that we get
// consistent texture directions (i.e. north is texture-up on all tiles)
SetTerrainTexcoords(sourceGeometry, (textureDirection - rotation + 4) % 4);
lockedVertices = CopyYRotatedGeometry(lockedVertices, sourceGeometry, 4, rotationAngle);
lockedIndices = PrintSquareIndices(lockedIndices, 4 + currentSubset - 1, 1);
lockedAttributes = PrintAttributes(lockedAttributes, currentSubset, 1);
}
}
}
// Unlock the buffers
internalTerrainMesh->UnlockVertexBuffer();
internalTerrainMesh->UnlockIndexBuffer();
internalTerrainMesh->UnlockAttributeBuffer();
// Normalize
//CONFIRM(SUCCEEDED(D3DXComputeNormals(internalTerrainMesh, NULL)));
// Assign the output mesh
*terrainMesh = internalTerrainMesh;
// Success
return true;
}
int main(int argc, char *argv[])
{
int ret = 0;
try {
// initialize directx
IDirect3D9 *d3d = Direct3DCreate9(D3D_SDK_VERSION);
if (!d3d)
throw std::string("This application requires DirectX 9");
// create a window
HWND hwnd = CreateWindowEx(0, "static", "GNU Rocket Example",
WS_POPUP | WS_VISIBLE, 0, 0, width, height, 0, 0,
GetModuleHandle(0), 0);
// create the device
IDirect3DDevice9 *device = NULL;
static D3DPRESENT_PARAMETERS present_parameters = {width,
height, D3DFMT_X8R8G8B8, 3, D3DMULTISAMPLE_NONE, 0,
D3DSWAPEFFECT_DISCARD, 0, WINDOWED, 1, D3DFMT_D24S8,
0, WINDOWED ? 0 : D3DPRESENT_RATE_DEFAULT, 0
};
if (FAILED(d3d->CreateDevice(D3DADAPTER_DEFAULT,
D3DDEVTYPE_HAL, hwnd, D3DCREATE_HARDWARE_VERTEXPROCESSING,
&present_parameters, &device)))
throw std::string("Failed to create device");
// init BASS
int soundDevice = 1;
if (!BASS_Init(soundDevice, 44100, 0, hwnd, 0))
throw std::string("Failed to init bass");
// load tune
HSTREAM stream = BASS_StreamCreateFile(false, "tune.ogg", 0, 0,
BASS_MP3_SETPOS | (!soundDevice ? BASS_STREAM_DECODE : 0));
if (!stream)
throw std::string("Failed to open tune");
// let's just assume 150 BPM (this holds true for the included tune)
float bpm = 150.0f;
// setup timer and construct sync-device
BassTimer timer(stream, bpm, 8);
std::auto_ptr<sync::Device> syncDevice = std::auto_ptr<sync::Device>(
sync::createDevice("sync", timer));
if (!syncDevice.get())
throw std::string("Failed to connect to host?");
// get tracks
sync::Track &clearRTrack = syncDevice->getTrack("clear.r");
sync::Track &clearGTrack = syncDevice->getTrack("clear.g");
sync::Track &clearBTrack = syncDevice->getTrack("clear.b");
sync::Track &camRotTrack = syncDevice->getTrack("cam.rot");
sync::Track &camDistTrack = syncDevice->getTrack("cam.dist");
LPD3DXMESH cubeMesh = NULL;
if (FAILED(D3DXCreateBox(device, 1.0f, 1.0f, 1.0f, &cubeMesh, NULL)))
return -1;
// let's roll!
BASS_Start();
timer.play();
bool done = false;
while (!done) {
float row = float(timer.getRow());
if (!syncDevice->update(row))
done = true;
// setup clear color
D3DXCOLOR clearColor(clearRTrack.getValue(row), clearGTrack.getValue(row), clearBTrack.getValue(row), 0.0);
// paint the window
device->BeginScene();
device->Clear(0, 0, D3DCLEAR_TARGET | D3DCLEAR_ZBUFFER | D3DCLEAR_STENCIL, clearColor, 1.0f, 0);
/* D3DXMATRIX world;
device->SetTransform(D3DTS_WORLD, &world); */
float rot = camRotTrack.getValue(row);
float dist = camDistTrack.getValue(row);
D3DXVECTOR3 eye(sin(rot) * dist, 0, cos(rot) * dist);
D3DXVECTOR3 at(0, 0, 0);
D3DXVECTOR3 up(0, 1, 0);
D3DXMATRIX view;
D3DXMatrixLookAtLH(&view, &(eye + at), &at, &up);
device->SetTransform(D3DTS_WORLD, &view);
D3DXMATRIX proj;
D3DXMatrixPerspectiveFovLH(&proj, D3DXToRadian(60), 4.0f / 3, 0.1f, 1000.f);
device->SetTransform(D3DTS_PROJECTION, &proj);
cubeMesh->DrawSubset(0);
device->EndScene();
device->Present(0, 0, 0, 0);
BASS_Update(0); // decrease the chance of missing vsync
MSG msg;
while (PeekMessage(&msg, NULL, 0, 0, PM_REMOVE)) {
TranslateMessage(&msg);
DispatchMessage(&msg);
if (WM_QUIT == msg.message) done = true;
if ((WM_KEYDOWN == msg.message) && (VK_ESCAPE == LOWORD(msg.wParam))) done = true;
}
}
BASS_StreamFree(stream);
BASS_Free();
device->Release();
d3d->Release();
DestroyWindow(hwnd);
} catch (const std::exception &e) {
#ifdef _CONSOLE
fprintf(stderr, "*** error: %s\n", e.what());
#else
MessageBox(NULL, e.what(), NULL, MB_OK | MB_ICONERROR | MB_SETFOREGROUND);
#endif
ret = -1;
} catch (const std::string &str) {
#ifdef _CONSOLE
fprintf(stderr, "*** error: %s\n", str.c_str());
#else
MessageBox(NULL, e.what(), NULL, MB_OK | MB_ICONERROR | MB_SETFOREGROUND);
#endif
ret = -1;
}
return ret;
}
//-----------------------------------------------------------------------------
// Convert the mesh to the format specified by the given vertex declarations.
//-----------------------------------------------------------------------------
HRESULT CDXUTMesh::SetVertexDecl( LPDIRECT3DDEVICE9 pd3dDevice, const D3DVERTEXELEMENT9 *pDecl,
bool bAutoComputeNormals, bool bAutoComputeTangents,
bool bSplitVertexForOptimalTangents )
{
LPD3DXMESH pTempMesh = NULL;
if( m_pMesh )
{
if( FAILED( m_pMesh->CloneMesh( m_pMesh->GetOptions(), pDecl,
pd3dDevice, &pTempMesh ) ) )
{
SAFE_RELEASE( pTempMesh );
return E_FAIL;
}
}
// Check if the old declaration contains a normal.
bool bHadNormal = false;
bool bHadTangent = false;
D3DVERTEXELEMENT9 aOldDecl[MAX_FVF_DECL_SIZE];
if( m_pMesh && SUCCEEDED( m_pMesh->GetDeclaration( aOldDecl ) ) )
{
for( UINT index = 0; index < D3DXGetDeclLength( aOldDecl ); ++index )
{
if( aOldDecl[index].Usage == D3DDECLUSAGE_NORMAL )
{
bHadNormal = true;
}
if( aOldDecl[index].Usage == D3DDECLUSAGE_TANGENT )
{
bHadTangent = true;
}
}
}
// Check if the new declaration contains a normal.
bool bHaveNormalNow = false;
bool bHaveTangentNow = false;
D3DVERTEXELEMENT9 aNewDecl[MAX_FVF_DECL_SIZE];
if( pTempMesh && SUCCEEDED( pTempMesh->GetDeclaration( aNewDecl ) ) )
{
for( UINT index = 0; index < D3DXGetDeclLength( aNewDecl ); ++index )
{
if( aNewDecl[index].Usage == D3DDECLUSAGE_NORMAL )
{
bHaveNormalNow = true;
}
if( aNewDecl[index].Usage == D3DDECLUSAGE_TANGENT )
{
bHaveTangentNow = true;
}
}
}
SAFE_RELEASE( m_pMesh );
if( pTempMesh )
{
m_pMesh = pTempMesh;
if( !bHadNormal && bHaveNormalNow && bAutoComputeNormals )
{
// Compute normals in case the meshes have them
D3DXComputeNormals( m_pMesh, NULL );
}
if( bHaveNormalNow && !bHadTangent && bHaveTangentNow && bAutoComputeTangents )
{
ID3DXMesh* pNewMesh;
HRESULT hr;
DWORD *rgdwAdjacency = NULL;
rgdwAdjacency = new DWORD[m_pMesh->GetNumFaces() * 3];
if( rgdwAdjacency == NULL )
return E_OUTOFMEMORY;
V( m_pMesh->GenerateAdjacency(1e-6f,rgdwAdjacency) );
float fPartialEdgeThreshold;
float fSingularPointThreshold;
float fNormalEdgeThreshold;
if( bSplitVertexForOptimalTangents )
{
fPartialEdgeThreshold = 0.01f;
fSingularPointThreshold = 0.25f;
fNormalEdgeThreshold = 0.01f;
}
else
{
fPartialEdgeThreshold = -1.01f;
fSingularPointThreshold = 0.01f;
fNormalEdgeThreshold = -1.01f;
}
// Compute tangents, which are required for normal mapping
hr = D3DXComputeTangentFrameEx( m_pMesh,
D3DDECLUSAGE_TEXCOORD, 0,
D3DDECLUSAGE_TANGENT, 0,
D3DX_DEFAULT, 0,
D3DDECLUSAGE_NORMAL, 0,
0, rgdwAdjacency,
fPartialEdgeThreshold, fSingularPointThreshold, fNormalEdgeThreshold,
&pNewMesh, NULL );
SAFE_DELETE_ARRAY( rgdwAdjacency );
if( FAILED(hr) )
return hr;
SAFE_RELEASE( m_pMesh );
m_pMesh = pNewMesh;
}
}
return S_OK;
}
//------------------------------------------------------------------------------
//this is a check function
//------------------------------------------------------------------------------
void TriPickDemo::checkPick(LPD3DXMESH mesh, D3DXMATRIX matWorld)
{
HRESULT hr;
D3DXMATRIX mWorldViewProjection;
mWorldViewProjection = matWorld * g_Camera->viewProj();
HR(m_FX->SetTechnique("RenderScene"));
// send matrix to shader
HR(m_FX->SetMatrix("g_mWorldViewProjection", &mWorldViewProjection));
HR(m_FX->SetMatrix("g_mWorld", &matWorld));
UINT uPasses;
V(m_FX->Begin(&uPasses, 0));
g_pDevice->SetRenderState(D3DRS_FILLMODE, D3DFILL_SOLID);
V(m_FX->BeginPass(0));
//get select ray
D3DXVECTOR3 originW(0.0f, 0.0f, 0.0f);
D3DXVECTOR3 dirW(0.0f, 0.0f, 0.0f);
if (gDInput->mouseButtonDown(0))
{
getWorldPickingRay(originW, dirW, matWorld);
LPD3DXMESH pMesh;
mesh->CloneMeshFVF(D3DXMESH_MANAGED, D3DVERTEX::FVF, g_pDevice, &pMesh);
BOOL hit = 0;
DWORD faceIndex = -1;
float u = 0.0f;
float v = 0.0f;
float dist = 0.0f;
ID3DXBuffer* allhits = 0;
DWORD numHits = 0;
HR(D3DXIntersect(pMesh, &originW, &dirW, &hit,
&faceIndex, &u, &v, &dist, &allhits, &numHits));
SAFE_RELEASE(allhits);
//if hit
if (hit)
{
IDirect3DVertexBuffer9* vb = 0;
IDirect3DIndexBuffer9* ib = 0;
HR(pMesh->GetVertexBuffer(&vb));
HR(pMesh->GetIndexBuffer(&ib));
HR(g_pDevice->SetIndices(ib));
HR(g_pDevice->SetFVF(D3DVERTEX::FVF));
HR(g_pDevice->SetStreamSource(0, vb, 0, sizeof(D3DVERTEX)));
//render hit surface
HR(g_pDevice->DrawIndexedPrimitive(
D3DPT_TRIANGLELIST, 0, 0, pMesh->GetNumVertices(), faceIndex * 3, 1))
g_pDevice->SetRenderState(D3DRS_LIGHTING, FALSE);
SAFE_RELEASE(vb);
SAFE_RELEASE(ib);
SAFE_RELEASE(pMesh);
}
}
HR(m_FX->EndPass());
HR(m_FX->End());
}
