void PointPortOverlay::paint(QPainter &p, bool)
{
p.setViewTransformEnabled(true);
mTransform = p.deviceTransform();
if (mButtonDown) {
QPen pen(QBrush(Qt::green), 2.0);
pen.setCosmetic(true);
p.setPen(pen);
p.drawLine(mCurrentPoint - QPointF(0, 5), mCurrentPoint + QPointF(0, 5));
p.drawLine(mCurrentPoint - QPointF(5, 0), mCurrentPoint + QPointF(5, 0));
}
}
void SXBSchView::print(QPrinter* pPrinter)
{
m_pDoc->resetSelect();
updateViewBuffer(true);
QPainter paint;
if(paint.begin(pPrinter ) ) {
int dpi;
#ifdef Q_WS_MACX
int dpix,dpiy;;
dpix = pPrinter->logicalDpiX();
dpiy = pPrinter->logicalDpiY();
dpi=((dpix < dpiy) ? dpix : dpiy);
#else
dpi = pPrinter->resolution();
#endif
paint.setRenderHint(QPainter::Antialiasing, true);
// QRect rcPaper = pPrinter->paperRect();
// printf("paperRect %d,%d,%d,%d\n",rcPaper.left(),rcPaper.top(),rcPaper.width(),rcPaper.height());
QRect rcVp = paint.viewport();
QRect rcPg = pPrinter->pageRect();
// printf("pageRect %d,%d,%d,%d\n",rcPg.left(),rcPg.top(),rcPg.width(),rcPg.height());
// int orientation = pPrinter->orientation();
// printf("orientation %d\n",orientation);
int vpWidth, vpHeight;
int pgLeft, pgTop, pgWidth, pgHeight;
vpWidth =rcVp.width();
vpHeight = rcVp.height();
pgLeft =rcPg.left();
pgTop =rcPg.top();
pgWidth =rcPg.width();
pgHeight = rcPg.height();
//印刷時に印刷の向きを変えてもpageRect()の返す値が変わらないQtのバグ(?)の対策
if( (vpWidth > vpHeight && pgWidth < pgHeight)
|| (vpWidth < vpHeight && pgWidth > pgHeight) ) {
int swapn;
swapn = pgLeft;
pgLeft = pgTop;
pgTop = swapn;
swapn = pgWidth;
pgWidth = pgHeight;
pgHeight = swapn;
}
QSettings *settings = g_cfg.getSettings();
int leftMargin = 15;
int topMargin = 15;
int rightMargin = 15;
int bottomMargin = 15;
settings->beginGroup("PrintOption");
bool color = settings->value("Color",true).toBool();
settings->endGroup();
settings->beginGroup("PrintMargin");
topMargin = settings->value("Top",15).toInt();
bottomMargin = settings->value("Bottom",15).toInt();
leftMargin = settings->value("Left",15).toInt();
rightMargin = settings->value("Right",15).toInt();
settings->endGroup();
if (topMargin < 0) topMargin = 0;
else if (topMargin > 50) topMargin = 50;
if (bottomMargin < 0) bottomMargin = 0;
else if (bottomMargin > 50) bottomMargin = 50;
if (leftMargin < 0) leftMargin = 0;
else if (leftMargin > 50) leftMargin = 50;
if (rightMargin < 0) rightMargin = 0;
else if (rightMargin > 50) rightMargin = 50;
topMargin = dpi * 10 * topMargin / 254;
bottomMargin = dpi * 10 * bottomMargin / 254;
leftMargin = dpi * 10 * leftMargin / 254;
rightMargin = dpi * 10 * rightMargin / 254;
// printf("SXBSchView::print() dpi:%d\n",dpi);
paint.save();
paint.setViewTransformEnabled (true);
paint.resetMatrix();
SSize size = m_pDoc->SheetSize();
int w = size.w();
int h = size.h();
int dw = w*10;
int dh = h*10;
// p->setWindow( 0,0, dw, dh );
// QRect rc = paint.viewport();
int rightWidth = vpWidth-(pgLeft+pgWidth);
if(rightWidth < 0) rightWidth = 0;
int bottomWidth = vpHeight-(pgTop+pgHeight);
if(bottomWidth < 0) bottomWidth = 0;
leftMargin -= pgLeft;
if(leftMargin < 0)leftMargin = 0;
topMargin -= pgTop;
if(topMargin < 0) topMargin = 0;
rightMargin -= rightWidth;
if(rightMargin < 0) rightMargin = 0;
bottomMargin -= bottomWidth;
if(bottomMargin < 0) bottomMargin = 0;
int vw = pgWidth-(leftMargin+rightMargin);
int vh = pgHeight-(topMargin+bottomMargin);
double sheetRatio=(double)w / (double)h;
double viewRatio=(double)vw / (double)vh;
int newW;
int newH;
if(sheetRatio > viewRatio) {
newW = vw;
newH = (int)(vw / sheetRatio);
} else {
newH = vh;
newW = (int)(vh * sheetRatio);
}
// printf("newW,H=%d,%d\n",newW,newH);
// p->setViewport( rc.left() + (vw-newW)/2,
// rc.top() + (vh-newH)/2,
// newW, newH );
// QRect rcvp = p->viewport();
// printf("x,y,w,h %d,%d,%d,%d\n",rcvp.x(),rcvp.y(),rcvp.width(),rcvp.height());
paint.setViewport( leftMargin+ (vw-newW)/2,
topMargin + (vh-newH)/2,
newW, newH );
paint.setWindow( 0,0, dw, dh );
// rcvp = p->viewport();
// printf("x,y,w,h %d,%d,%d,%d\n",rcvp.x(),rcvp.y(),rcvp.width(),rcvp.height());
QRect rcClip = QRect(0,0,dw,dh);
SRect srcClip =SRect(0,0,w,h);
paint.setBackground(Qt::white);
paint.eraseRect(0,0,dw,dh);
g_drawFrame(&paint,size,rcClip,Qt::black,1,10);
drawMainXBSchObj(&paint,(color ? DRAW_ON : DRAW_MONO)|DRAW_FOR_PRINT,&srcClip,false,1,10);
paint.restore();
paint.end();
}
}
