SkISize SkAndroidCodec::getSampledSubsetDimensions(int sampleSize, const SkIRect& subset) const {
if (!is_valid_sample_size(sampleSize)) {
return SkISize::Make(0, 0);
}
// We require that the input subset is a subset that is supported by SkAndroidCodec.
// We test this by calling getSupportedSubset() and verifying that no modifications
// are made to the subset.
SkIRect copySubset = subset;
if (!this->getSupportedSubset(©Subset) || copySubset != subset) {
return SkISize::Make(0, 0);
}
// If the subset is the entire image, for consistency, use getSampledDimensions().
if (fInfo.dimensions() == subset.size()) {
return this->getSampledDimensions(sampleSize);
}
// This should perhaps call a virtual function, but currently both of our subclasses
// want the same implementation.
return SkISize::Make(get_scaled_dimension(subset.width(), sampleSize),
get_scaled_dimension(subset.height(), sampleSize));
}
bool onFilterImageDeprecated(Proxy* proxy, const SkBitmap& src, const Context& ctx,
SkBitmap* dst, SkIPoint* offset) const override {
SkBitmap source = src;
SkIPoint srcOffset = SkIPoint::Make(0, 0);
if (!this->filterInputDeprecated(0, proxy, src, ctx, &source, &srcOffset)) {
return false;
}
SkIRect bounds;
if (!this->applyCropRectDeprecated(ctx, proxy, source, &srcOffset, &bounds, &source)) {
return false;
}
SkAutoTUnref<SkBaseDevice> device(proxy->createDevice(bounds.width(), bounds.height()));
SkCanvas canvas(device);
SkPaint paint;
paint.setXfermodeMode(SkXfermode::kSrc_Mode);
canvas.drawBitmap(source, fDX - bounds.left(), fDY - bounds.top(), &paint);
*dst = device->accessBitmap(false);
offset->fX += bounds.left();
offset->fY += bounds.top();
return true;
}
static void draw_sprite(SkCanvas* canvas, const SkRect& r, SkImageFilter* imf) {
SkPaint paint;
SkIRect bounds;
r.roundOut(&bounds);
SkBitmap bm;
bm.setConfig(SkBitmap::kARGB_8888_Config, bounds.width(), bounds.height());
bm.allocPixels();
bm.eraseColor(SK_ColorRED);
SkCanvas c(bm);
SkIRect cropRect = SkIRect::MakeXYWH(10, 10, 44, 44);
paint.setColor(SK_ColorGREEN);
c.drawRect(SkRect::Make(cropRect), paint);
paint.setImageFilter(imf);
SkPoint loc = { r.fLeft, r.fTop };
canvas->getTotalMatrix().mapPoints(&loc, 1);
canvas->drawSprite(bm,
SkScalarRoundToInt(loc.fX), SkScalarRoundToInt(loc.fY),
&paint);
}
static void SkARGB32_Blit32(const SkBitmap& device, const SkMask& mask,
const SkIRect& clip, SkPMColor srcColor) {
U8CPU alpha = SkGetPackedA32(srcColor);
unsigned flags = SkBlitRow::kSrcPixelAlpha_Flag32;
if (alpha != 255) {
flags |= SkBlitRow::kGlobalAlpha_Flag32;
}
SkBlitRow::Proc32 proc = SkBlitRow::Factory32(flags);
int x = clip.fLeft;
int y = clip.fTop;
int width = clip.width();
int height = clip.height();
SkPMColor* dstRow = device.getAddr32(x, y);
const SkPMColor* srcRow = reinterpret_cast<const SkPMColor*>(mask.getAddr8(x, y));
do {
proc(dstRow, srcRow, width, alpha);
dstRow = (SkPMColor*)((char*)dstRow + device.rowBytes());
srcRow = (const SkPMColor*)((const char*)srcRow + mask.fRowBytes);
} while (--height != 0);
}
bool SkPictureImageFilter::onFilterImageDeprecated(Proxy* proxy, const SkBitmap&,
const Context& ctx,
SkBitmap* result, SkIPoint* offset) const {
if (!fPicture) {
offset->fX = offset->fY = 0;
return true;
}
SkRect floatBounds;
ctx.ctm().mapRect(&floatBounds, fCropRect);
SkIRect bounds = floatBounds.roundOut();
if (!bounds.intersect(ctx.clipBounds())) {
return false;
}
if (bounds.isEmpty()) {
offset->fX = offset->fY = 0;
return true;
}
SkAutoTUnref<SkBaseDevice> device(proxy->createDevice(bounds.width(), bounds.height()));
if (nullptr == device.get()) {
return false;
}
if (kDeviceSpace_PictureResolution == fPictureResolution ||
0 == (ctx.ctm().getType() & ~SkMatrix::kTranslate_Mask)) {
this->drawPictureAtDeviceResolution(device.get(), bounds, ctx);
} else {
this->drawPictureAtLocalResolution(proxy, device.get(), bounds, ctx);
}
*result = device.get()->accessBitmap(false);
offset->fX = bounds.fLeft;
offset->fY = bounds.fTop;
return true;
}
void SkImageFilter::CropRect::applyTo(const SkIRect& imageBounds,
const SkMatrix& ctm,
bool embiggen,
SkIRect* cropped) const {
*cropped = imageBounds;
if (fFlags) {
SkRect devCropR;
ctm.mapRect(&devCropR, fRect);
SkIRect devICropR = devCropR.roundOut();
// Compute the left/top first, in case we need to modify the right/bottom for a missing edge
if (fFlags & kHasLeft_CropEdge) {
if (embiggen || devICropR.fLeft > cropped->fLeft) {
cropped->fLeft = devICropR.fLeft;
}
} else {
devICropR.fRight = cropped->fLeft + devICropR.width();
}
if (fFlags & kHasTop_CropEdge) {
if (embiggen || devICropR.fTop > cropped->fTop) {
cropped->fTop = devICropR.fTop;
}
} else {
devICropR.fBottom = cropped->fTop + devICropR.height();
}
if (fFlags & kHasWidth_CropEdge) {
if (embiggen || devICropR.fRight < cropped->fRight) {
cropped->fRight = devICropR.fRight;
}
}
if (fFlags & kHasHeight_CropEdge) {
if (embiggen || devICropR.fBottom < cropped->fBottom) {
cropped->fBottom = devICropR.fBottom;
}
}
}
}
void SkARGB32_Black_Blitter::blitMask(const SkMask& mask, const SkIRect& clip) {
SkASSERT(mask.fBounds.contains(clip));
if (mask.fFormat == SkMask::kBW_Format) {
SkPMColor black = (SkPMColor)(SK_A32_MASK << SK_A32_SHIFT);
SkARGB32_BlitBW(fDevice, mask, clip, black);
} else if (SkMask::kARGB32_Format == mask.fFormat) {
SkARGB32_Blit32(fDevice, mask, clip, fPMColor);
} else if (SkMask::kLCD16_Format == mask.fFormat) {
blitmask_lcd16(fDevice, mask, clip, fPMColor);
} else if (SkMask::kLCD32_Format == mask.fFormat) {
blitmask_lcd32(fDevice, mask, clip, fPMColor);
} else {
unsigned width = clip.width();
unsigned height = clip.height();
SkASSERT((int)height > 0);
SkASSERT((int)width > 0);
uint32_t* device = fDevice.getAddr32(clip.fLeft, clip.fTop);
unsigned maskRB = mask.fRowBytes - width;
unsigned deviceRB = fDevice.rowBytes() - (width << 2);
const uint8_t* alpha = mask.getAddr(clip.fLeft, clip.fTop);
do {
unsigned w = width;
do {
unsigned aa = *alpha++;
*device = (aa << SK_A32_SHIFT) + SkAlphaMulQ(*device, SkAlpha255To256(255 - aa));
device += 1;
} while (--w != 0);
device = (uint32_t*)((char*)device + deviceRB);
alpha += maskRB;
} while (--height != 0);
}
}
bool GrIsImageInCache(const GrContext* ctx, uint32_t imageID, const SkIRect& subset,
GrTexture* nativeTexture, const GrTextureParams* params) {
SkGrStretch stretch;
get_stretch(ctx, subset.width(), subset.height(), params, &stretch);
// Handle the case where the bitmap/image is explicitly texture backed.
if (nativeTexture) {
if (SkGrStretch::kNone_Type == stretch.fType) {
return true;
}
const GrUniqueKey& key = nativeTexture->getUniqueKey();
if (!key.isValid()) {
return false;
}
GrUniqueKey stretchedKey;
GrMakeStretchedKey(key, stretch, &stretchedKey);
return ctx->textureProvider()->existsTextureWithUniqueKey(stretchedKey);
}
GrUniqueKey key, stretchedKey;
make_image_keys(imageID, subset, stretch, &key, &stretchedKey);
return ctx->textureProvider()->existsTextureWithUniqueKey(
(SkGrStretch::kNone_Type == stretch.fType) ? key : stretchedKey);
}
bool SkImageSource::onFilterImageDeprecated(Proxy* proxy, const SkBitmap& src, const Context& ctx,
SkBitmap* result, SkIPoint* offset) const {
SkRect dstRect;
ctx.ctm().mapRect(&dstRect, fDstRect);
SkRect bounds = SkRect::MakeIWH(fImage->width(), fImage->height());
if (fSrcRect == bounds && dstRect == bounds) {
// No regions cropped out or resized; return entire image.
offset->fX = offset->fY = 0;
return fImage->asLegacyBitmap(result, SkImage::kRO_LegacyBitmapMode);
}
const SkIRect dstIRect = dstRect.roundOut();
SkAutoTUnref<SkBaseDevice> device(proxy->createDevice(dstIRect.width(), dstIRect.height()));
if (nullptr == device.get()) {
return false;
}
SkCanvas canvas(device.get());
SkPaint paint;
// Subtract off the integer component of the translation (will be applied in loc, below).
dstRect.offset(-SkIntToScalar(dstIRect.fLeft), -SkIntToScalar(dstIRect.fTop));
paint.setXfermodeMode(SkXfermode::kSrc_Mode);
// FIXME: this probably shouldn't be necessary, but drawImageRect asserts
// None filtering when it's translate-only
paint.setFilterQuality(
fSrcRect.width() == dstRect.width() && fSrcRect.height() == dstRect.height() ?
kNone_SkFilterQuality : fFilterQuality);
canvas.drawImageRect(fImage, fSrcRect, dstRect, &paint, SkCanvas::kStrict_SrcRectConstraint);
*result = device.get()->accessBitmap(false);
offset->fX = dstIRect.fLeft;
offset->fY = dstIRect.fTop;
return true;
}
// Exercise the public API of SkSpecialSurface (e.g., getCanvas, newImageSnapshot)
static void test_surface(const sk_sp<SkSpecialSurface>& surf,
skiatest::Reporter* reporter,
int offset) {
const SkIRect surfSubset = TestingSpecialSurfaceAccess::Subset(surf.get());
REPORTER_ASSERT(reporter, offset == surfSubset.fLeft);
REPORTER_ASSERT(reporter, offset == surfSubset.fTop);
REPORTER_ASSERT(reporter, kSmallerSize == surfSubset.width());
REPORTER_ASSERT(reporter, kSmallerSize == surfSubset.height());
SkCanvas* canvas = surf->getCanvas();
SkASSERT_RELEASE(canvas);
canvas->clear(SK_ColorRED);
sk_sp<SkSpecialImage> img(surf->makeImageSnapshot());
REPORTER_ASSERT(reporter, img);
const SkIRect imgSubset = img->subset();
REPORTER_ASSERT(reporter, surfSubset == imgSubset);
// the canvas was invalidated by the newImageSnapshot call
REPORTER_ASSERT(reporter, !surf->getCanvas());
}
PassOwnPtr<Vector<char>> PictureSnapshot::replay(unsigned fromStep, unsigned toStep, double scale) const
{
const SkIRect bounds = m_picture->cullRect().roundOut();
// TODO(fmalita): convert this to SkSurface/SkImage, drop the intermediate SkBitmap.
SkBitmap bitmap;
bitmap.allocPixels(SkImageInfo::MakeN32Premul(bounds.width(), bounds.height()));
bitmap.eraseARGB(0, 0, 0, 0);
{
ReplayingCanvas canvas(bitmap, fromStep, toStep);
// Disable LCD text preemptively, because the picture opacity is unknown.
// The canonical API involves SkSurface props, but since we're not SkSurface-based
// at this point (see TODO above) we (ab)use saveLayer for this purpose.
SkAutoCanvasRestore autoRestore(&canvas, false);
canvas.saveLayer(nullptr, nullptr);
canvas.scale(scale, scale);
canvas.resetStepCount();
m_picture->playback(&canvas, &canvas);
}
OwnPtr<Vector<char>> base64Data = adoptPtr(new Vector<char>());
Vector<char> encodedImage;
RefPtr<SkImage> image = adoptRef(SkImage::NewFromBitmap(bitmap));
if (!image)
return nullptr;
ImagePixelLocker pixelLocker(image, kUnpremul_SkAlphaType, kRGBA_8888_SkColorType);
ImageDataBuffer imageData(IntSize(image->width(), image->height()),
static_cast<const unsigned char*>(pixelLocker.pixels()));
if (!PNGImageEncoder::encode(imageData, reinterpret_cast<Vector<unsigned char>*>(&encodedImage)))
return nullptr;
base64Encode(encodedImage, *base64Data);
return base64Data.release();
}
static void drawStretchyPatch(SkCanvas* canvas, SkIRect& src, const SkRect& dst,
const SkBitmap& bitmap, const SkPaint& paint,
SkColor initColor, uint32_t colorHint,
bool hasXfer) {
if (colorHint != android::Res_png_9patch::NO_COLOR) {
((SkPaint*)&paint)->setColor(modAlpha(colorHint, paint.getAlpha()));
canvas->drawRect(dst, paint);
((SkPaint*)&paint)->setColor(initColor);
} else if (src.width() == 1 && src.height() == 1) {
SkColor c;
if (!getColor(bitmap, src.fLeft, src.fTop, &c)) {
goto SLOW_CASE;
}
if (0 != c || hasXfer) {
SkColor prev = paint.getColor();
((SkPaint*)&paint)->setColor(c);
canvas->drawRect(dst, paint);
((SkPaint*)&paint)->setColor(prev);
}
} else {
SLOW_CASE:
canvas->drawBitmapRect(bitmap, &src, dst, &paint);
}
}
SkImage* SkImage_Base::onApplyFilter(SkImageFilter* filter, SkIPoint* offsetResult,
bool forceResultToOriginalSize) const {
SkBitmap src;
if (!this->getROPixels(&src)) {
return nullptr;
}
const SkIRect srcBounds = SkIRect::MakeWH(this->width(), this->height());
if (forceResultToOriginalSize) {
const SkIRect clipBounds = srcBounds;
SkRasterImageFilterProxy proxy;
SkImageFilter::Context ctx(SkMatrix::I(), clipBounds, SkImageFilter::Cache::Get(),
SkImageFilter::kExact_SizeConstraint);
SkBitmap dst;
if (filter->filterImage(&proxy, src, ctx, &dst, offsetResult)) {
dst.setImmutable();
return SkImage::NewFromBitmap(dst);
}
} else {
const SkIRect dstR = compute_fast_ibounds(filter, srcBounds);
SkImageInfo info = SkImageInfo::MakeN32Premul(dstR.width(), dstR.height());
SkAutoTUnref<SkSurface> surface(this->onNewSurface(info));
SkPaint paint;
paint.setImageFilter(filter);
surface->getCanvas()->drawImage(this, SkIntToScalar(-dstR.x()), SkIntToScalar(-dstR.y()),
&paint);
offsetResult->set(dstR.x(), dstR.y());
return surface->newImageSnapshot();
}
return nullptr;
}
bool SkImageFilter::CropRect::applyTo(const SkIRect& imageBounds, const Context& ctx,
SkIRect* cropped) const {
*cropped = imageBounds;
if (fFlags) {
SkRect devCropR;
ctx.ctm().mapRect(&devCropR, fRect);
const SkIRect devICropR = devCropR.roundOut();
// Compute the left/top first, in case we have to read them to compute right/bottom
if (fFlags & kHasLeft_CropEdge) {
cropped->fLeft = devICropR.fLeft;
}
if (fFlags & kHasTop_CropEdge) {
cropped->fTop = devICropR.fTop;
}
if (fFlags & kHasWidth_CropEdge) {
cropped->fRight = cropped->fLeft + devICropR.width();
}
if (fFlags & kHasHeight_CropEdge) {
cropped->fBottom = cropped->fTop + devICropR.height();
}
}
return cropped->intersect(ctx.clipBounds());
}
SkNinePatchIter::SkNinePatchIter(int w, int h, const SkIRect& c, const SkRect& dst) {
SkASSERT(SkIRect::MakeWH(w, h).contains(c));
fSrcX[0] = 0;
fSrcX[1] = SkIntToScalar(c.fLeft);
fSrcX[2] = SkIntToScalar(c.fRight);
fSrcX[3] = SkIntToScalar(w);
fSrcY[0] = 0;
fSrcY[1] = SkIntToScalar(c.fTop);
fSrcY[2] = SkIntToScalar(c.fBottom);
fSrcY[3] = SkIntToScalar(h);
fDstX[0] = dst.fLeft;
fDstX[1] = dst.fLeft + SkIntToScalar(c.fLeft);
fDstX[2] = dst.fRight - SkIntToScalar(w - c.fRight);
fDstX[3] = dst.fRight;
fDstY[0] = dst.fTop;
fDstY[1] = dst.fTop + SkIntToScalar(c.fTop);
fDstY[2] = dst.fBottom - SkIntToScalar(h - c.fBottom);
fDstY[3] = dst.fBottom;
if (fDstX[1] > fDstX[2]) {
fDstX[1] = fDstX[0] + (fDstX[3] - fDstX[0]) * c.fLeft / (w - c.width());
fDstX[2] = fDstX[1];
}
if (fDstY[1] > fDstY[2]) {
fDstY[1] = fDstY[0] + (fDstY[3] - fDstY[0]) * c.fTop / (h - c.height());
fDstY[2] = fDstY[1];
}
fCurrX = fCurrY = 0;
fDone = false;
}
void onDraw(SkCanvas* canvas) override {
if (nullptr == fBitmap.pixelRef()) {
fImage = make_image(canvas, &fCenter);
image_to_bitmap(fImage.get(), &fBitmap);
}
// amount of bm that should not be stretched (unless we have to)
const SkScalar fixed = SkIntToScalar(fBitmap.width() - fCenter.width());
const SkTSize<SkScalar> size[] = {
{ fixed * 4 / 5, fixed * 4 / 5 }, // shrink in both axes
{ fixed * 4 / 5, fixed * 4 }, // shrink in X
{ fixed * 4, fixed * 4 / 5 }, // shrink in Y
{ fixed * 4, fixed * 4 }
};
canvas->drawBitmap(fBitmap, 10, 10, nullptr);
SkScalar x = SkIntToScalar(100);
SkScalar y = SkIntToScalar(100);
SkPaint paint;
for (int filter = 0; filter < 2; filter++) {
paint.setFilterQuality(filter == 0 ? kLow_SkFilterQuality : kNone_SkFilterQuality);
canvas->translate(0, filter * SkIntToScalar(400));
for (int iy = 0; iy < 2; ++iy) {
for (int ix = 0; ix < 2; ++ix) {
int i = ix * 2 + iy;
SkRect r = SkRect::MakeXYWH(x + ix * fixed, y + iy * fixed,
size[i].width(), size[i].height());
canvas->drawBitmapNine(fBitmap, fCenter, r, &paint);
canvas->drawImageNine(fImage.get(), fCenter, r.makeOffset(360, 0), &paint);
}
}
}
}
void blitLCDMask(const SkMask& mask, const SkIRect& clip) {
auto proc = fState.getLCDProc(0);
const int x = clip.fLeft;
const int width = clip.width();
int y = clip.fTop;
typename State::DstType* device = State::WritableAddr(fDevice, x, y);
const size_t deviceRB = fDevice.rowBytes();
const uint16_t* maskRow = (const uint16_t*)mask.getAddr(x, y);
const size_t maskRB = mask.fRowBytes;
if (fConstInY) {
fShaderContext->shadeSpan4f(x, y, fState.fBuffer, width);
}
for (; y < clip.fBottom; ++y) {
if (!fConstInY) {
fShaderContext->shadeSpan4f(x, y, fState.fBuffer, width);
}
proc(device, fState.fBuffer, width, maskRow);
device = (typename State::DstType*)((char*)device + deviceRB);
maskRow = (const uint16_t*)((const char*)maskRow + maskRB);
}
}
static bool sectsrect_proc(SkRegion& a, SkRegion& b) {
SkIRect r = a.getBounds();
r.inset(r.width()/4, r.height()/4);
return a.intersects(r);
}
GrTexture* GaussianBlur(GrContext* context,
GrTexture* srcTexture,
bool canClobberSrc,
const SkRect& rect,
bool cropToRect,
float sigmaX,
float sigmaY) {
SkASSERT(context);
SkIRect clearRect;
int scaleFactorX, radiusX;
int scaleFactorY, radiusY;
int maxTextureSize = context->caps()->maxTextureSize();
sigmaX = adjust_sigma(sigmaX, maxTextureSize, &scaleFactorX, &radiusX);
sigmaY = adjust_sigma(sigmaY, maxTextureSize, &scaleFactorY, &radiusY);
SkRect srcRect(rect);
scale_rect(&srcRect, 1.0f / scaleFactorX, 1.0f / scaleFactorY);
srcRect.roundOut(&srcRect);
scale_rect(&srcRect, static_cast<float>(scaleFactorX),
static_cast<float>(scaleFactorY));
// setup new clip
GrClip clip(SkRect::MakeWH(srcRect.width(), srcRect.height()));
SkASSERT(kBGRA_8888_GrPixelConfig == srcTexture->config() ||
kRGBA_8888_GrPixelConfig == srcTexture->config() ||
kAlpha_8_GrPixelConfig == srcTexture->config());
GrSurfaceDesc desc;
desc.fFlags = kRenderTarget_GrSurfaceFlag;
desc.fWidth = SkScalarFloorToInt(srcRect.width());
desc.fHeight = SkScalarFloorToInt(srcRect.height());
desc.fConfig = srcTexture->config();
GrTexture* dstTexture;
GrTexture* tempTexture;
SkAutoTUnref<GrTexture> temp1, temp2;
temp1.reset(context->textureProvider()->refScratchTexture(
desc, GrTextureProvider::kApprox_ScratchTexMatch));
dstTexture = temp1.get();
if (canClobberSrc) {
tempTexture = srcTexture;
} else {
temp2.reset(context->textureProvider()->refScratchTexture(
desc, GrTextureProvider::kApprox_ScratchTexMatch));
tempTexture = temp2.get();
}
if (NULL == dstTexture || NULL == tempTexture) {
return NULL;
}
GrDrawContext* drawContext = context->drawContext();
if (!drawContext) {
return NULL;
}
for (int i = 1; i < scaleFactorX || i < scaleFactorY; i *= 2) {
GrPaint paint;
SkMatrix matrix;
matrix.setIDiv(srcTexture->width(), srcTexture->height());
SkRect dstRect(srcRect);
if (cropToRect && i == 1) {
dstRect.offset(-dstRect.fLeft, -dstRect.fTop);
SkRect domain;
matrix.mapRect(&domain, rect);
domain.inset(i < scaleFactorX ? SK_ScalarHalf / srcTexture->width() : 0.0f,
i < scaleFactorY ? SK_ScalarHalf / srcTexture->height() : 0.0f);
SkAutoTUnref<GrFragmentProcessor> fp( GrTextureDomainEffect::Create(
paint.getProcessorDataManager(),
srcTexture,
matrix,
domain,
GrTextureDomain::kDecal_Mode,
GrTextureParams::kBilerp_FilterMode));
paint.addColorProcessor(fp);
} else {
GrTextureParams params(SkShader::kClamp_TileMode, GrTextureParams::kBilerp_FilterMode);
paint.addColorTextureProcessor(srcTexture, matrix, params);
}
scale_rect(&dstRect, i < scaleFactorX ? 0.5f : 1.0f,
i < scaleFactorY ? 0.5f : 1.0f);
drawContext->drawNonAARectToRect(dstTexture->asRenderTarget(), clip, paint, SkMatrix::I(),
dstRect, srcRect);
srcRect = dstRect;
srcTexture = dstTexture;
SkTSwap(dstTexture, tempTexture);
}
const SkIRect srcIRect = srcRect.roundOut();
// For really small blurs(Certainly no wider than 5x5 on desktop gpus) it is faster to just
// launch a single non separable kernel vs two launches
if (sigmaX > 0.0f && sigmaY > 0 &&
(2 * radiusX + 1) * (2 * radiusY + 1) <= MAX_KERNEL_SIZE) {
// We shouldn't be scaling because this is a small size blur
SkASSERT((scaleFactorX == scaleFactorY) == 1);
SkRect dstRect = SkRect::MakeWH(srcRect.width(), srcRect.height());
convolve_gaussian_2d(drawContext, dstTexture->asRenderTarget(), clip, srcRect, dstRect,
srcTexture, radiusX, radiusY, sigmaX, sigmaY, cropToRect, srcIRect);
srcTexture = dstTexture;
srcRect = dstRect;
SkTSwap(dstTexture, tempTexture);
} else {
if (sigmaX > 0.0f) {
if (scaleFactorX > 1) {
// Clear out a radius to the right of the srcRect to prevent the
// X convolution from reading garbage.
clearRect = SkIRect::MakeXYWH(srcIRect.fRight, srcIRect.fTop,
radiusX, srcIRect.height());
drawContext->clear(srcTexture->asRenderTarget(), &clearRect, 0x0, false);
}
SkRect dstRect = SkRect::MakeWH(srcRect.width(), srcRect.height());
convolve_gaussian(drawContext, dstTexture->asRenderTarget(), clip, srcRect, dstRect,
srcTexture, Gr1DKernelEffect::kX_Direction, radiusX, sigmaX,
cropToRect);
srcTexture = dstTexture;
srcRect = dstRect;
SkTSwap(dstTexture, tempTexture);
}
if (sigmaY > 0.0f) {
if (scaleFactorY > 1 || sigmaX > 0.0f) {
// Clear out a radius below the srcRect to prevent the Y
// convolution from reading garbage.
clearRect = SkIRect::MakeXYWH(srcIRect.fLeft, srcIRect.fBottom,
srcIRect.width(), radiusY);
drawContext->clear(srcTexture->asRenderTarget(), &clearRect, 0x0, false);
}
SkRect dstRect = SkRect::MakeWH(srcRect.width(), srcRect.height());
convolve_gaussian(drawContext, dstTexture->asRenderTarget(), clip, srcRect,
dstRect, srcTexture, Gr1DKernelEffect::kY_Direction, radiusY, sigmaY,
cropToRect);
srcTexture = dstTexture;
srcRect = dstRect;
SkTSwap(dstTexture, tempTexture);
}
}
if (scaleFactorX > 1 || scaleFactorY > 1) {
// Clear one pixel to the right and below, to accommodate bilinear
// upsampling.
clearRect = SkIRect::MakeXYWH(srcIRect.fLeft, srcIRect.fBottom,
srcIRect.width() + 1, 1);
drawContext->clear(srcTexture->asRenderTarget(), &clearRect, 0x0, false);
clearRect = SkIRect::MakeXYWH(srcIRect.fRight, srcIRect.fTop,
1, srcIRect.height());
drawContext->clear(srcTexture->asRenderTarget(), &clearRect, 0x0, false);
SkMatrix matrix;
matrix.setIDiv(srcTexture->width(), srcTexture->height());
GrPaint paint;
// FIXME: this should be mitchell, not bilinear.
GrTextureParams params(SkShader::kClamp_TileMode, GrTextureParams::kBilerp_FilterMode);
paint.addColorTextureProcessor(srcTexture, matrix, params);
SkRect dstRect(srcRect);
scale_rect(&dstRect, (float) scaleFactorX, (float) scaleFactorY);
drawContext->drawNonAARectToRect(dstTexture->asRenderTarget(), clip, paint,
SkMatrix::I(), dstRect, srcRect);
srcRect = dstRect;
srcTexture = dstTexture;
SkTSwap(dstTexture, tempTexture);
}
return SkRef(srcTexture);
}
bool SkXfermodeImageFilter::filterImageGPUDeprecated(Proxy* proxy,
const SkBitmap& src,
const Context& ctx,
SkBitmap* result,
SkIPoint* offset) const {
GrContext* context = nullptr;
SkBitmap background = src;
SkIPoint backgroundOffset = SkIPoint::Make(0, 0);
if (!this->filterInputGPUDeprecated(0, proxy, src, ctx, &background, &backgroundOffset)) {
background.reset();
}
GrTexture* backgroundTex = background.getTexture();
if (backgroundTex) {
context = backgroundTex->getContext();
}
SkBitmap foreground = src;
SkIPoint foregroundOffset = SkIPoint::Make(0, 0);
if (!this->filterInputGPUDeprecated(1, proxy, src, ctx, &foreground, &foregroundOffset)) {
foreground.reset();
}
GrTexture* foregroundTex = foreground.getTexture();
if (foregroundTex) {
context = foregroundTex->getContext();
}
if (!context) {
return false;
}
SkIRect bounds = background.bounds().makeOffset(backgroundOffset.x(), backgroundOffset.y());
bounds.join(foreground.bounds().makeOffset(foregroundOffset.x(), foregroundOffset.y()));
if (bounds.isEmpty()) {
return false;
}
GrSurfaceDesc desc;
desc.fFlags = kRenderTarget_GrSurfaceFlag;
desc.fWidth = bounds.width();
desc.fHeight = bounds.height();
desc.fConfig = kSkia8888_GrPixelConfig;
SkAutoTUnref<GrTexture> dst(context->textureProvider()->createApproxTexture(desc));
if (!dst) {
return false;
}
GrPaint paint;
SkAutoTUnref<const GrFragmentProcessor> bgFP;
if (backgroundTex) {
SkMatrix backgroundMatrix;
backgroundMatrix.setIDiv(backgroundTex->width(), backgroundTex->height());
backgroundMatrix.preTranslate(SkIntToScalar(-backgroundOffset.fX),
SkIntToScalar(-backgroundOffset.fY));
bgFP.reset(GrTextureDomainEffect::Create(
backgroundTex, backgroundMatrix,
GrTextureDomain::MakeTexelDomain(backgroundTex, background.bounds()),
GrTextureDomain::kDecal_Mode,
GrTextureParams::kNone_FilterMode));
} else {
bgFP.reset(GrConstColorProcessor::Create(GrColor_TRANSPARENT_BLACK,
GrConstColorProcessor::kIgnore_InputMode));
}
if (foregroundTex) {
SkMatrix foregroundMatrix;
foregroundMatrix.setIDiv(foregroundTex->width(), foregroundTex->height());
foregroundMatrix.preTranslate(SkIntToScalar(-foregroundOffset.fX),
SkIntToScalar(-foregroundOffset.fY));
SkAutoTUnref<const GrFragmentProcessor> foregroundFP;
foregroundFP.reset(GrTextureDomainEffect::Create(
foregroundTex, foregroundMatrix,
GrTextureDomain::MakeTexelDomain(foregroundTex, foreground.bounds()),
GrTextureDomain::kDecal_Mode,
GrTextureParams::kNone_FilterMode));
paint.addColorFragmentProcessor(foregroundFP.get());
// A null fMode is interpreted to mean kSrcOver_Mode (to match raster).
SkAutoTUnref<SkXfermode> mode(SkSafeRef(fMode.get()));
if (!mode) {
// It would be awesome to use SkXfermode::Create here but it knows better
// than us and won't return a kSrcOver_Mode SkXfermode. That means we
// have to get one the hard way.
struct ProcCoeff rec;
rec.fProc = SkXfermode::GetProc(SkXfermode::kSrcOver_Mode);
SkXfermode::ModeAsCoeff(SkXfermode::kSrcOver_Mode, &rec.fSC, &rec.fDC);
mode.reset(new SkProcCoeffXfermode(rec, SkXfermode::kSrcOver_Mode));
}
SkAutoTUnref<const GrFragmentProcessor> xferFP(mode->getFragmentProcessorForImageFilter(bgFP));
// A null 'xferFP' here means kSrc_Mode was used in which case we can just proceed
if (xferFP) {
paint.addColorFragmentProcessor(xferFP);
}
} else {
paint.addColorFragmentProcessor(bgFP);
}
paint.setPorterDuffXPFactory(SkXfermode::kSrc_Mode);
SkAutoTUnref<GrDrawContext> drawContext(context->drawContext(dst->asRenderTarget()));
if (!drawContext) {
return false;
}
SkMatrix matrix;
matrix.setTranslate(SkIntToScalar(-bounds.left()), SkIntToScalar(-bounds.top()));
drawContext->drawRect(GrClip::WideOpen(), paint, matrix, SkRect::Make(bounds));
offset->fX = bounds.left();
offset->fY = bounds.top();
GrWrapTextureInBitmap(dst, bounds.width(), bounds.height(), false, result);
return true;
}
bool SkMorphologyImageFilter::filterImageGeneric(SkMorphologyImageFilter::Proc procX,
SkMorphologyImageFilter::Proc procY,
Proxy* proxy,
const SkBitmap& source,
const Context& ctx,
SkBitmap* dst,
SkIPoint* offset) const {
SkBitmap src = source;
SkIPoint srcOffset = SkIPoint::Make(0, 0);
if (getInput(0) && !getInput(0)->filterImage(proxy, source, ctx, &src, &srcOffset)) {
return false;
}
if (src.colorType() != kN32_SkColorType) {
return false;
}
SkIRect bounds;
if (!this->applyCropRect(ctx, proxy, src, &srcOffset, &bounds, &src)) {
return false;
}
SkAutoLockPixels alp(src);
if (!src.getPixels()) {
return false;
}
if (!dst->tryAllocPixels(src.info().makeWH(bounds.width(), bounds.height()))) {
return false;
}
SkVector radius = SkVector::Make(SkIntToScalar(this->radius().width()),
SkIntToScalar(this->radius().height()));
ctx.ctm().mapVectors(&radius, 1);
int width = SkScalarFloorToInt(radius.fX);
int height = SkScalarFloorToInt(radius.fY);
if (width < 0 || height < 0) {
return false;
}
SkIRect srcBounds = bounds;
srcBounds.offset(-srcOffset);
if (width == 0 && height == 0) {
src.extractSubset(dst, srcBounds);
offset->fX = bounds.left();
offset->fY = bounds.top();
return true;
}
SkBitmap temp;
if (!temp.tryAllocPixels(dst->info())) {
return false;
}
if (width > 0 && height > 0) {
callProcX(procX, src, &temp, width, srcBounds);
SkIRect tmpBounds = SkIRect::MakeWH(srcBounds.width(), srcBounds.height());
callProcY(procY, temp, dst, height, tmpBounds);
} else if (width > 0) {
callProcX(procX, src, dst, width, srcBounds);
} else if (height > 0) {
callProcY(procY, src, dst, height, srcBounds);
}
offset->fX = bounds.left();
offset->fY = bounds.top();
return true;
}
static void callProcY(SkMorphologyImageFilter::Proc procY, const SkBitmap& src, SkBitmap* dst, int radiusY, const SkIRect& bounds)
{
procY(src.getAddr32(bounds.left(), bounds.top()), dst->getAddr32(0, 0),
radiusY, bounds.height(), bounds.width(),
src.rowBytesAsPixels(), dst->rowBytesAsPixels());
}
bool SkJPEGImageDecoder::onDecodeRegion(SkBitmap* bm, SkIRect region) {
if (index == NULL) {
return false;
}
int startX = region.fLeft;
int startY = region.fTop;
int width = region.width();
int height = region.height();
jpeg_decompress_struct *cinfo = index->cinfo;
SkAutoMalloc srcStorage;
skjpeg_error_mgr sk_err;
cinfo->err = jpeg_std_error(&sk_err);
sk_err.error_exit = skjpeg_error_exit;
if (setjmp(sk_err.fJmpBuf)) {
return false;
}
int requestedSampleSize = this->getSampleSize();
cinfo->scale_denom = requestedSampleSize;
if (this->getPreferQualityOverSpeed()) {
cinfo->dct_method = JDCT_ISLOW;
} else {
cinfo->dct_method = JDCT_IFAST;
}
SkBitmap::Config config = this->getPrefConfig(k32Bit_SrcDepth, false);
if (config != SkBitmap::kARGB_8888_Config &&
config != SkBitmap::kARGB_4444_Config &&
config != SkBitmap::kRGB_565_Config) {
config = SkBitmap::kARGB_8888_Config;
}
/* default format is RGB */
cinfo->out_color_space = JCS_RGB;
#ifdef ANDROID_RGB
cinfo->dither_mode = JDITHER_NONE;
if (config == SkBitmap::kARGB_8888_Config) {
cinfo->out_color_space = JCS_RGBA_8888;
} else if (config == SkBitmap::kRGB_565_Config) {
cinfo->out_color_space = JCS_RGB_565;
if (this->getDitherImage()) {
cinfo->dither_mode = JDITHER_ORDERED;
}
}
#endif
int oriStartX = startX;
int oriStartY = startY;
int oriWidth = width;
int oriHeight = height;
jpeg_init_read_tile_scanline(cinfo, index->index,
&startX, &startY, &width, &height);
int skiaSampleSize = recompute_sampleSize(requestedSampleSize, *cinfo);
int actualSampleSize = skiaSampleSize * (DCTSIZE / cinfo->min_DCT_scaled_size);
SkBitmap *bitmap = new SkBitmap;
SkAutoTDelete<SkBitmap> adb(bitmap);
#ifdef ANDROID_RGB
/* short-circuit the SkScaledBitmapSampler when possible, as this gives
a significant performance boost.
*/
if (skiaSampleSize == 1 &&
((config == SkBitmap::kARGB_8888_Config &&
cinfo->out_color_space == JCS_RGBA_8888) ||
(config == SkBitmap::kRGB_565_Config &&
cinfo->out_color_space == JCS_RGB_565)))
{
bitmap->setConfig(config, cinfo->output_width, height);
bitmap->setIsOpaque(true);
if (!this->allocPixelRef(bitmap, NULL)) {
return return_false(*cinfo, *bitmap, "allocPixelRef");
}
SkAutoLockPixels alp(*bitmap);
JSAMPLE* rowptr = (JSAMPLE*)bitmap->getPixels();
INT32 const bpr = bitmap->rowBytes();
int row_total_count = 0;
while (row_total_count < height) {
int row_count = jpeg_read_tile_scanline(cinfo,
index->index, &rowptr);
// if row_count == 0, then we didn't get a scanline, so abort.
// if we supported partial images, we might return true in this case
if (0 == row_count) {
return return_false(*cinfo, *bitmap, "read_scanlines");
}
if (this->shouldCancelDecode()) {
return return_false(*cinfo, *bitmap, "shouldCancelDecode");
}
row_total_count += row_count;
rowptr += bpr;
}
cropBitmap(bm, bitmap, actualSampleSize, oriStartX, oriStartY,
oriWidth, oriHeight, startX, startY);
return true;
}
#endif
// check for supported formats
SkScaledBitmapSampler::SrcConfig sc;
if (3 == cinfo->out_color_components && JCS_RGB == cinfo->out_color_space) {
sc = SkScaledBitmapSampler::kRGB;
#ifdef ANDROID_RGB
} else if (JCS_RGBA_8888 == cinfo->out_color_space) {
sc = SkScaledBitmapSampler::kRGBX;
} else if (JCS_RGB_565 == cinfo->out_color_space) {
sc = SkScaledBitmapSampler::kRGB_565;
#endif
} else if (1 == cinfo->out_color_components &&
JCS_GRAYSCALE == cinfo->out_color_space) {
sc = SkScaledBitmapSampler::kGray;
} else {
return return_false(*cinfo, *bm, "jpeg colorspace");
}
SkScaledBitmapSampler sampler(width, height, skiaSampleSize);
bitmap->setConfig(config, sampler.scaledWidth(), sampler.scaledHeight());
bitmap->setIsOpaque(true);
if (!this->allocPixelRef(bitmap, NULL)) {
return return_false(*cinfo, *bitmap, "allocPixelRef");
}
SkAutoLockPixels alp(*bitmap);
if (!sampler.begin(bitmap, sc, this->getDitherImage())) {
return return_false(*cinfo, *bitmap, "sampler.begin");
}
uint8_t* srcRow = (uint8_t*)srcStorage.reset(width * 4);
// Possibly skip initial rows [sampler.srcY0]
if (!skip_src_rows_tile(cinfo, index->index, srcRow, sampler.srcY0())) {
return return_false(*cinfo, *bitmap, "skip rows");
}
// now loop through scanlines until y == bitmap->height() - 1
for (int y = 0;; y++) {
JSAMPLE* rowptr = (JSAMPLE*)srcRow;
int row_count = jpeg_read_tile_scanline(cinfo, index->index, &rowptr);
if (0 == row_count) {
return return_false(*cinfo, *bitmap, "read_scanlines");
}
if (this->shouldCancelDecode()) {
return return_false(*cinfo, *bitmap, "shouldCancelDecode");
}
sampler.next(srcRow);
if (bitmap->height() - 1 == y) {
// we're done
break;
}
if (!skip_src_rows_tile(cinfo, index->index, srcRow,
sampler.srcDY() - 1)) {
return return_false(*cinfo, *bitmap, "skip rows");
}
}
cropBitmap(bm, bitmap, actualSampleSize, oriStartX, oriStartY,
oriWidth, oriHeight, startX, startY);
return true;
}
static void check(skiatest::Reporter* r,
const char path[],
SkISize size,
bool supportsScanlineDecoding,
bool supportsSubsetDecoding,
bool supportsIncomplete = true) {
SkAutoTDelete<SkStream> stream(resource(path));
if (!stream) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
SkAutoTDelete<SkCodec> codec(nullptr);
bool isIncomplete = supportsIncomplete;
if (isIncomplete) {
size_t size = stream->getLength();
SkAutoTUnref<SkData> data((SkData::NewFromStream(stream, 2 * size / 3)));
codec.reset(SkCodec::NewFromData(data));
} else {
codec.reset(SkCodec::NewFromStream(stream.detach()));
}
if (!codec) {
ERRORF(r, "Unable to decode '%s'", path);
return;
}
// Test full image decodes with SkCodec
SkMD5::Digest codecDigest;
SkImageInfo info = codec->getInfo().makeColorType(kN32_SkColorType);
SkBitmap bm;
SkCodec::Result expectedResult = isIncomplete ? SkCodec::kIncompleteInput : SkCodec::kSuccess;
test_codec(r, codec.get(), bm, info, size, expectedResult, &codecDigest, nullptr);
// Scanline decoding follows.
// Need to call startScanlineDecode() first.
REPORTER_ASSERT(r, codec->getScanlines(bm.getAddr(0, 0), 1, 0)
== 0);
REPORTER_ASSERT(r, codec->skipScanlines(1)
== 0);
const SkCodec::Result startResult = codec->startScanlineDecode(info);
if (supportsScanlineDecoding) {
bm.eraseColor(SK_ColorYELLOW);
REPORTER_ASSERT(r, startResult == SkCodec::kSuccess);
for (int y = 0; y < info.height(); y++) {
const int lines = codec->getScanlines(bm.getAddr(0, y), 1, 0);
if (!isIncomplete) {
REPORTER_ASSERT(r, 1 == lines);
}
}
// verify that scanline decoding gives the same result.
if (SkCodec::kTopDown_SkScanlineOrder == codec->getScanlineOrder()) {
compare_to_good_digest(r, codecDigest, bm);
}
// Cannot continue to decode scanlines beyond the end
REPORTER_ASSERT(r, codec->getScanlines(bm.getAddr(0, 0), 1, 0)
== 0);
// Interrupting a scanline decode with a full decode starts from
// scratch
REPORTER_ASSERT(r, codec->startScanlineDecode(info) == SkCodec::kSuccess);
const int lines = codec->getScanlines(bm.getAddr(0, 0), 1, 0);
if (!isIncomplete) {
REPORTER_ASSERT(r, lines == 1);
}
REPORTER_ASSERT(r, codec->getPixels(bm.info(), bm.getPixels(), bm.rowBytes())
== expectedResult);
REPORTER_ASSERT(r, codec->getScanlines(bm.getAddr(0, 0), 1, 0)
== 0);
REPORTER_ASSERT(r, codec->skipScanlines(1)
== 0);
// Test partial scanline decodes
if (supports_scaled_codec(path) && info.width() >= 3) {
SkCodec::Options options;
int width = info.width();
int height = info.height();
SkIRect subset = SkIRect::MakeXYWH(2 * (width / 3), 0, width / 3, height);
options.fSubset = ⊂
const SkCodec::Result partialStartResult = codec->startScanlineDecode(info, &options,
nullptr, nullptr);
REPORTER_ASSERT(r, partialStartResult == SkCodec::kSuccess);
for (int y = 0; y < height; y++) {
const int lines = codec->getScanlines(bm.getAddr(0, y), 1, 0);
if (!isIncomplete) {
REPORTER_ASSERT(r, 1 == lines);
}
}
}
} else {
REPORTER_ASSERT(r, startResult == SkCodec::kUnimplemented);
}
// The rest of this function tests decoding subsets, and will decode an arbitrary number of
// random subsets.
// Do not attempt to decode subsets of an image of only once pixel, since there is no
// meaningful subset.
if (size.width() * size.height() == 1) {
return;
}
SkRandom rand;
SkIRect subset;
SkCodec::Options opts;
opts.fSubset = ⊂
for (int i = 0; i < 5; i++) {
subset = generate_random_subset(&rand, size.width(), size.height());
SkASSERT(!subset.isEmpty());
const bool supported = codec->getValidSubset(&subset);
REPORTER_ASSERT(r, supported == supportsSubsetDecoding);
SkImageInfo subsetInfo = info.makeWH(subset.width(), subset.height());
SkBitmap bm;
bm.allocPixels(subsetInfo);
const SkCodec::Result result = codec->getPixels(bm.info(), bm.getPixels(), bm.rowBytes(),
&opts, nullptr, nullptr);
if (supportsSubsetDecoding) {
REPORTER_ASSERT(r, result == expectedResult);
// Webp is the only codec that supports subsets, and it will have modified the subset
// to have even left/top.
REPORTER_ASSERT(r, SkIsAlign2(subset.fLeft) && SkIsAlign2(subset.fTop));
} else {
// No subsets will work.
REPORTER_ASSERT(r, result == SkCodec::kUnimplemented);
}
}
// SkScaledCodec tests
if ((supportsScanlineDecoding || supportsSubsetDecoding) && supports_scaled_codec(path)) {
SkAutoTDelete<SkStream> stream(resource(path));
if (!stream) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
SkAutoTDelete<SkAndroidCodec> androidCodec(nullptr);
if (isIncomplete) {
size_t size = stream->getLength();
SkAutoTUnref<SkData> data((SkData::NewFromStream(stream, 2 * size / 3)));
androidCodec.reset(SkAndroidCodec::NewFromData(data));
} else {
androidCodec.reset(SkAndroidCodec::NewFromStream(stream.detach()));
}
if (!androidCodec) {
ERRORF(r, "Unable to decode '%s'", path);
return;
}
SkBitmap bm;
SkMD5::Digest scaledCodecDigest;
test_codec(r, androidCodec.get(), bm, info, size, expectedResult, &scaledCodecDigest,
&codecDigest);
}
// Test SkCodecImageGenerator
if (!isIncomplete) {
SkAutoTDelete<SkStream> stream(resource(path));
SkAutoTUnref<SkData> fullData(SkData::NewFromStream(stream, stream->getLength()));
SkAutoTDelete<SkImageGenerator> gen(SkCodecImageGenerator::NewFromEncodedCodec(fullData));
SkBitmap bm;
bm.allocPixels(info);
SkAutoLockPixels autoLockPixels(bm);
REPORTER_ASSERT(r, gen->getPixels(info, bm.getPixels(), bm.rowBytes()));
compare_to_good_digest(r, codecDigest, bm);
}
// If we've just tested incomplete decodes, let's run the same test again on full decodes.
if (isIncomplete) {
check(r, path, size, supportsScanlineDecoding, supportsSubsetDecoding, false);
}
}
bool GrSWMaskHelper::init(const SkIRect& resultBounds,
const SkMatrix* matrix,
bool allowCompression) {
if (matrix) {
fMatrix = *matrix;
} else {
fMatrix.setIdentity();
}
// Now translate so the bound's UL corner is at the origin
fMatrix.postTranslate(-resultBounds.fLeft * SK_Scalar1,
-resultBounds.fTop * SK_Scalar1);
SkIRect bounds = SkIRect::MakeWH(resultBounds.width(),
resultBounds.height());
if (allowCompression &&
fContext->getOptions().fDrawPathToCompressedTexture &&
choose_compressed_fmt(fContext->getGpu()->caps(), &fCompressedFormat)) {
fCompressionMode = kCompress_CompressionMode;
}
// Make sure that the width is a multiple of the desired block dimensions
// to allow for specialized SIMD instructions that compress multiple blocks at a time.
int cmpWidth = bounds.fRight;
int cmpHeight = bounds.fBottom;
if (kCompress_CompressionMode == fCompressionMode) {
int dimX, dimY;
SkTextureCompressor::GetBlockDimensions(fCompressedFormat, &dimX, &dimY);
cmpWidth = dimX * ((cmpWidth + (dimX - 1)) / dimX);
cmpHeight = dimY * ((cmpHeight + (dimY - 1)) / dimY);
// Can we create a blitter?
if (SkTextureCompressor::ExistsBlitterForFormat(fCompressedFormat)) {
int cmpSz = SkTextureCompressor::GetCompressedDataSize(
fCompressedFormat, cmpWidth, cmpHeight);
SkASSERT(cmpSz > 0);
SkASSERT(NULL == fCompressedBuffer.get());
fCompressedBuffer.reset(cmpSz);
fCompressionMode = kBlitter_CompressionMode;
}
}
// If we don't have a custom blitter, then we either need a bitmap to compress
// from or a bitmap that we're going to use as a texture. In any case, we should
// allocate the pixels for a bitmap
const SkImageInfo bmImageInfo = SkImageInfo::MakeA8(cmpWidth, cmpHeight);
if (kBlitter_CompressionMode != fCompressionMode) {
if (!fBM.tryAllocPixels(bmImageInfo)) {
return false;
}
sk_bzero(fBM.getPixels(), fBM.getSafeSize());
} else {
// Otherwise, we just need to remember how big the buffer is...
fBM.setInfo(bmImageInfo);
}
sk_bzero(&fDraw, sizeof(fDraw));
fRasterClip.setRect(bounds);
fDraw.fRC = &fRasterClip;
fDraw.fClip = &fRasterClip.bwRgn();
fDraw.fMatrix = &fMatrix;
fDraw.fBitmap = &fBM;
return true;
}
// clipRect has not been shifted up
void sk_fill_path(const SkPath& path, const SkIRect& clipRect, SkBlitter* blitter,
int start_y, int stop_y, int shiftEdgesUp, bool pathContainedInClip) {
SkASSERT(blitter);
SkIRect shiftedClip = clipRect;
shiftedClip.fLeft = SkLeftShift(shiftedClip.fLeft, shiftEdgesUp);
shiftedClip.fRight = SkLeftShift(shiftedClip.fRight, shiftEdgesUp);
shiftedClip.fTop = SkLeftShift(shiftedClip.fTop, shiftEdgesUp);
shiftedClip.fBottom = SkLeftShift(shiftedClip.fBottom, shiftEdgesUp);
SkEdgeBuilder builder;
int count = builder.build_edges(path, &shiftedClip, shiftEdgesUp, pathContainedInClip);
SkEdge** list = builder.edgeList();
if (0 == count) {
if (path.isInverseFillType()) {
/*
* Since we are in inverse-fill, our caller has already drawn above
* our top (start_y) and will draw below our bottom (stop_y). Thus
* we need to restrict our drawing to the intersection of the clip
* and those two limits.
*/
SkIRect rect = clipRect;
if (rect.fTop < start_y) {
rect.fTop = start_y;
}
if (rect.fBottom > stop_y) {
rect.fBottom = stop_y;
}
if (!rect.isEmpty()) {
blitter->blitRect(rect.fLeft << shiftEdgesUp,
rect.fTop << shiftEdgesUp,
rect.width() << shiftEdgesUp,
rect.height() << shiftEdgesUp);
}
}
return;
}
SkEdge headEdge, tailEdge, *last;
// this returns the first and last edge after they're sorted into a dlink list
SkEdge* edge = sort_edges(list, count, &last);
headEdge.fPrev = nullptr;
headEdge.fNext = edge;
headEdge.fFirstY = kEDGE_HEAD_Y;
headEdge.fX = SK_MinS32;
edge->fPrev = &headEdge;
tailEdge.fPrev = last;
tailEdge.fNext = nullptr;
tailEdge.fFirstY = kEDGE_TAIL_Y;
last->fNext = &tailEdge;
// now edge is the head of the sorted linklist
start_y = SkLeftShift(start_y, shiftEdgesUp);
stop_y = SkLeftShift(stop_y, shiftEdgesUp);
if (!pathContainedInClip && start_y < shiftedClip.fTop) {
start_y = shiftedClip.fTop;
}
if (!pathContainedInClip && stop_y > shiftedClip.fBottom) {
stop_y = shiftedClip.fBottom;
}
InverseBlitter ib;
PrePostProc proc = nullptr;
if (path.isInverseFillType()) {
ib.setBlitter(blitter, clipRect, shiftEdgesUp);
blitter = &ib;
proc = PrePostInverseBlitterProc;
}
// count >= 2 is required as the convex walker does not handle missing right edges
if (path.isConvex() && (nullptr == proc) && count >= 2) {
walk_simple_edges(&headEdge, blitter, start_y, stop_y);
} else {
walk_edges(&headEdge, path.getFillType(), blitter, start_y, stop_y, proc,
shiftedClip.right());
}
}
void SkScalerContext::getMetrics(SkGlyph* glyph) {
this->getGlyphContext(*glyph)->generateMetrics(glyph);
// for now we have separate cache entries for devkerning on and off
// in the future we might share caches, but make our measure/draw
// code make the distinction. Thus we zap the values if the caller
// has not asked for them.
if ((fRec.fFlags & SkScalerContext::kDevKernText_Flag) == 0) {
// no devkern, so zap the fields
glyph->fLsbDelta = glyph->fRsbDelta = 0;
}
// if either dimension is empty, zap the image bounds of the glyph
if (0 == glyph->fWidth || 0 == glyph->fHeight) {
glyph->fWidth = 0;
glyph->fHeight = 0;
glyph->fTop = 0;
glyph->fLeft = 0;
glyph->fMaskFormat = 0;
return;
}
if (fRec.fFrameWidth > 0 || fPathEffect != NULL || fRasterizer != NULL) {
SkPath devPath, fillPath;
SkMatrix fillToDevMatrix;
this->internalGetPath(*glyph, &fillPath, &devPath, &fillToDevMatrix);
if (fRasterizer) {
SkMask mask;
if (fRasterizer->rasterize(fillPath, fillToDevMatrix, NULL,
fMaskFilter, &mask,
SkMask::kJustComputeBounds_CreateMode)) {
glyph->fLeft = mask.fBounds.fLeft;
glyph->fTop = mask.fBounds.fTop;
glyph->fWidth = SkToU16(mask.fBounds.width());
glyph->fHeight = SkToU16(mask.fBounds.height());
} else {
goto SK_ERROR;
}
} else {
// just use devPath
SkIRect ir;
devPath.getBounds().roundOut(&ir);
if (ir.isEmpty() || !ir.is16Bit()) {
goto SK_ERROR;
}
glyph->fLeft = ir.fLeft;
glyph->fTop = ir.fTop;
glyph->fWidth = SkToU16(ir.width());
glyph->fHeight = SkToU16(ir.height());
}
}
if (SkMask::kARGB32_Format != glyph->fMaskFormat) {
glyph->fMaskFormat = fRec.fMaskFormat;
}
if (fMaskFilter) {
SkMask src, dst;
SkMatrix matrix;
glyph->toMask(&src);
fRec.getMatrixFrom2x2(&matrix);
src.fImage = NULL; // only want the bounds from the filter
if (fMaskFilter->filterMask(&dst, src, matrix, NULL)) {
SkASSERT(dst.fImage == NULL);
glyph->fLeft = dst.fBounds.fLeft;
glyph->fTop = dst.fBounds.fTop;
glyph->fWidth = SkToU16(dst.fBounds.width());
glyph->fHeight = SkToU16(dst.fBounds.height());
glyph->fMaskFormat = dst.fFormat;
}
}
return;
SK_ERROR:
// draw nothing 'cause we failed
glyph->fLeft = 0;
glyph->fTop = 0;
glyph->fWidth = 0;
glyph->fHeight = 0;
// put a valid value here, in case it was earlier set to
// MASK_FORMAT_JUST_ADVANCE
glyph->fMaskFormat = fRec.fMaskFormat;
}
SkLatticeIter::SkLatticeIter(const SkCanvas::Lattice& lattice, const SkRect& dst) {
const int* xDivs = lattice.fXDivs;
const int origXCount = lattice.fXCount;
const int* yDivs = lattice.fYDivs;
const int origYCount = lattice.fYCount;
SkASSERT(lattice.fBounds);
const SkIRect src = *lattice.fBounds;
// In the x-dimension, the first rectangle always starts at x = 0 and is "scalable".
// If xDiv[0] is 0, it indicates that the first rectangle is degenerate, so the
// first real rectangle "scalable" in the x-direction.
//
// The same interpretation applies to the y-dimension.
//
// As we move left to right across the image, alternating patches will be "fixed" or
// "scalable" in the x-direction. Similarly, as move top to bottom, alternating
// patches will be "fixed" or "scalable" in the y-direction.
int xCount = origXCount;
int yCount = origYCount;
bool xIsScalable = (xCount > 0 && src.fLeft == xDivs[0]);
if (xIsScalable) {
// Once we've decided that the first patch is "scalable", we don't need the
// xDiv. It is always implied that we start at the edge of the bounds.
xDivs++;
xCount--;
}
bool yIsScalable = (yCount > 0 && src.fTop == yDivs[0]);
if (yIsScalable) {
// Once we've decided that the first patch is "scalable", we don't need the
// yDiv. It is always implied that we start at the edge of the bounds.
yDivs++;
yCount--;
}
// Count "scalable" and "fixed" pixels in each dimension.
int xCountScalable = count_scalable_pixels(xDivs, xCount, xIsScalable, src.fLeft, src.fRight);
int xCountFixed = src.width() - xCountScalable;
int yCountScalable = count_scalable_pixels(yDivs, yCount, yIsScalable, src.fTop, src.fBottom);
int yCountFixed = src.height() - yCountScalable;
fSrcX.reset(xCount + 2);
fDstX.reset(xCount + 2);
set_points(fDstX.begin(), fSrcX.begin(), xDivs, xCount, xCountFixed, xCountScalable,
src.fLeft, src.fRight, dst.fLeft, dst.fRight, xIsScalable);
fSrcY.reset(yCount + 2);
fDstY.reset(yCount + 2);
set_points(fDstY.begin(), fSrcY.begin(), yDivs, yCount, yCountFixed, yCountScalable,
src.fTop, src.fBottom, dst.fTop, dst.fBottom, yIsScalable);
fCurrX = fCurrY = 0;
fNumRectsInLattice = (xCount + 1) * (yCount + 1);
fNumRectsToDraw = fNumRectsInLattice;
if (lattice.fRectTypes) {
fRectTypes.push_back_n(fNumRectsInLattice);
fColors.push_back_n(fNumRectsInLattice);
const SkCanvas::Lattice::RectType* flags = lattice.fRectTypes;
const SkColor* colors = lattice.fColors;
bool hasPadRow = (yCount != origYCount);
bool hasPadCol = (xCount != origXCount);
if (hasPadRow) {
// The first row of rects are all empty, skip the first row of flags.
flags += origXCount + 1;
colors += origXCount + 1;
}
int i = 0;
for (int y = 0; y < yCount + 1; y++) {
for (int x = 0; x < origXCount + 1; x++) {
if (0 == x && hasPadCol) {
// The first column of rects are all empty. Skip a rect.
flags++;
colors++;
continue;
}
fRectTypes[i] = *flags;
fColors[i] = SkCanvas::Lattice::kFixedColor == *flags ? *colors : 0;
flags++;
colors++;
i++;
}
}
for (int j = 0; j < fRectTypes.count(); j++) {
if (SkCanvas::Lattice::kTransparent == fRectTypes[j]) {
fNumRectsToDraw--;
}
}
}
}
bool SkOffsetImageFilter::onFilterImage(Proxy* proxy, const SkBitmap& source,
const Context& ctx,
SkBitmap* result,
SkIPoint* offset) const {
SkImageFilter* input = getInput(0);
SkBitmap src = source;
SkIPoint srcOffset = SkIPoint::Make(0, 0);
#ifdef SK_DISABLE_OFFSETIMAGEFILTER_OPTIMIZATION
if (false) {
#else
if (!cropRectIsSet()) {
#endif
if (input && !input->filterImage(proxy, source, ctx, &src, &srcOffset)) {
return false;
}
SkVector vec;
ctx.ctm().mapVectors(&vec, &fOffset, 1);
offset->fX = srcOffset.fX + SkScalarRoundToInt(vec.fX);
offset->fY = srcOffset.fY + SkScalarRoundToInt(vec.fY);
*result = src;
} else {
if (input && !input->filterImage(proxy, source, ctx, &src, &srcOffset)) {
return false;
}
SkIRect bounds;
if (!this->applyCropRect(ctx, src, srcOffset, &bounds)) {
return false;
}
SkAutoTUnref<SkBaseDevice> device(proxy->createDevice(bounds.width(), bounds.height()));
if (NULL == device.get()) {
return false;
}
SkCanvas canvas(device);
SkPaint paint;
paint.setXfermodeMode(SkXfermode::kSrc_Mode);
canvas.translate(SkIntToScalar(srcOffset.fX - bounds.fLeft),
SkIntToScalar(srcOffset.fY - bounds.fTop));
SkVector vec;
ctx.ctm().mapVectors(&vec, &fOffset, 1);
canvas.drawBitmap(src, vec.x(), vec.y(), &paint);
*result = device->accessBitmap(false);
offset->fX = bounds.fLeft;
offset->fY = bounds.fTop;
}
return true;
}
void SkOffsetImageFilter::computeFastBounds(const SkRect& src, SkRect* dst) const {
if (getInput(0)) {
getInput(0)->computeFastBounds(src, dst);
} else {
*dst = src;
}
SkRect copy = *dst;
dst->offset(fOffset.fX, fOffset.fY);
dst->join(copy);
}
bool SkOffsetImageFilter::onFilterBounds(const SkIRect& src, const SkMatrix& ctm,
SkIRect* dst) const {
SkVector vec;
ctm.mapVectors(&vec, &fOffset, 1);
SkIRect bounds = src;
bounds.offset(-SkScalarCeilToInt(vec.fX), -SkScalarCeilToInt(vec.fY));
bounds.join(src);
if (getInput(0)) {
return getInput(0)->filterBounds(bounds, ctm, dst);
}
*dst = bounds;
return true;
}
static void toString(const SkIRect& r, SkString* str) {
str->appendf("[%d,%d %d:%d]", r.fLeft, r.fTop, r.width(), r.height());
}
