void GraphicEnd::savepcd()
{
cout<<"save final pointcloud"<<endl;
SLAMEnd slam;
slam.init(NULL);
SparseOptimizer& opt = slam.globalOptimizer;
opt.load("/home/lc/workspace/paper_related/Appolo/test/result/final_after.g2o");
ifstream fin("/home/lc/workspace/paper_related/Appolo/test/result/key_frame.txt");
PointCloud::Ptr output(new PointCloud());
PointCloud::Ptr curr( new PointCloud());
pcl::VoxelGrid<PointT> voxel;
voxel.setLeafSize(0.01f, 0.01f, 0.01f );
string pclPath ="/media/新加卷/dataset/dataset1/pcd/";
pcl::PassThrough<PointT> pass;
pass.setFilterFieldName("z");
double z = 5.0;
pass.setFilterLimits(0.0, z);
while( !fin.eof() )
{
int frame, id;
fin>>id>>frame;
ss<<pclPath<<frame<<".pcd";
string str;
ss>>str;
cout<<"loading "<<str<<endl;
ss.clear();
pcl::io::loadPCDFile( str.c_str(), *curr );
//cout<<"curr cloud size is: "<<curr->points.size()<<endl;
VertexSE3* pv = dynamic_cast<VertexSE3*> (opt.vertex( id ));
if (pv == NULL)
break;
Eigen::Isometry3d pos = pv->estimate();
cout<<pos.matrix()<<endl;
voxel.setInputCloud( curr );
PointCloud::Ptr tmp( new PointCloud());
voxel.filter( *tmp );
curr.swap( tmp );
pass.setInputCloud( curr );
pass.filter(*tmp);
curr->swap( *tmp );
//cout<<"tmp: "<<tmp->points.size()<<endl;
pcl::transformPointCloud( *curr, *tmp, pos.matrix());
*output += *tmp;
//cout<<"output: "<<output->points.size()<<endl;
}
voxel.setInputCloud( output );
PointCloud::Ptr output_filtered( new PointCloud );
voxel.filter( *output_filtered );
output->swap( *output_filtered );
//cout<<output->points.size()<<endl;
pcl::io::savePCDFile( "/home/lc/workspace/paper_related/Appolo/test/result/result.pcd", *output);
cout<<"final result saved."<<endl;
}
void GraphicEnd::generateKeyFrame( Eigen::Isometry3d T )
{
cout<<BOLDGREEN<<"GraphicEnd::generateKeyFrame"<<RESET<<endl;
//把present中的数据存储到current中
_currKF.id ++;
_currKF.planes = _present.planes;
_currKF.frame_index = _index;
_lastRGB = _currRGB.clone();
_kf_pos = _robot;
cout<<"add key frame: "<<_currKF.id<<endl;
//waitKey(0);
_keyframes.push_back( _currKF );
//将current关键帧存储至全局优化器
SparseOptimizer& opt = _pSLAMEnd->globalOptimizer;
//顶点
VertexSE3* v = new VertexSE3();
v->setId( _currKF.id );
//v->setEstimate( _robot );
if (_use_odometry)
v->setEstimate( _odo_this );
//v->setEstimate( Eigen::Isometry3d::Identity() );
else
v->setEstimate( Eigen::Isometry3d::Identity() );
opt.addVertex( v );
//边
EdgeSE3* edge = new EdgeSE3();
edge->vertices()[0] = opt.vertex( _currKF.id - 1 );
edge->vertices()[1] = opt.vertex( _currKF.id );
Eigen::Matrix<double, 6,6> information = Eigen::Matrix<double, 6, 6>::Identity();
information(0, 0) = information(2,2) = 100;
information(1, 1) = 100;
information(3,3) = information(4,4) = information(5,5) = 100;
edge->setInformation( information );
edge->setMeasurement( T );
opt.addEdge( edge );
if (_use_odometry)
{
Eigen::Isometry3d To = _odo_last.inverse()*_odo_this;
cout<<"odo last = "<<endl<<_odo_last.matrix()<<endl<<"odo this = "<<endl<<_odo_this.matrix()<<endl;
cout<<"To = "<<endl<<To.matrix()<<endl;
cout<<"Measurement = "<<endl<<T.matrix()<<endl;
//waitKey( 0 );
EdgeSE3* edge = new EdgeSE3();
edge->vertices()[0] = opt.vertex( _currKF.id - 1 );
edge->vertices()[1] = opt.vertex( _currKF.id );
Eigen::Matrix<double, 6,6> information = Eigen::Matrix<double, 6, 6>::Identity();
information(0, 0) = information(1,1) = information(2,2) = information(3,3) = information(4,4) = information(5,5) = 1/(_error_odometry*_error_odometry);
edge->setInformation( information );
edge->setMeasurement( To );
opt.addEdge( edge );
_odo_last = _odo_this;
}
}
int main()
{
Mat rgb1,rgb2,depth1,depth2;
fileread(rgb1,rgb2,depth1,depth2);
CAMERA_INTRINSIC_PARAMETERS C;
C.cx = 325.5;
C.cy = 253.5;
C.fx = 518.0;
C.fy = 519.0;
C.scale = 1000.0;
//feature detector and descriptor compute
Eigen::Isometry3d T = transformEstimation(rgb1,rgb2,depth1,depth2,C);
PointCloud::Ptr cloud1 = image2PointCloud(rgb1,depth1,C);
PointCloud::Ptr cloud2 = image2PointCloud(rgb2,depth2,C);
//pcl::io::savePCDFile("1.pcd", *cloud1);
//pcl::io::savePCDFile("2.pcd", *cloud2);
cout<<"combining clouds"<<endl;
PointCloud::Ptr output (new PointCloud());
pcl::transformPointCloud( *cloud2, *output, T.matrix());
*cloud1 += *output;
pcl::io::savePCDFile("result.pcd", *cloud1);
cout<<"Final result saved."<<endl;
return 0;
}
/**
* @function fit_BB
* @brief
*/
void fit_BB( std::vector<pcl::PointCloud<pcl::PointXYZRGBA>::Ptr > _clusters ) {
double dim[3]; Eigen::Isometry3d Tf;
for( int i = 0; i < _clusters.size(); ++i ) {
printf("\t * Fitting box for cluster %d \n", i );
pcl::PointCloud<pcl::PointXYZ>::Ptr p( new pcl::PointCloud<pcl::PointXYZ>() );
p->points.resize( _clusters[i]->points.size() );
for(int j = 0; j < _clusters[i]->points.size(); ++j ) {
p->points[j].x = _clusters[i]->points[j].x;
p->points[j].y = _clusters[i]->points[j].y;
p->points[j].z = _clusters[i]->points[j].z;
}
p->width = 1; p->height = p->points.size();
// Get Bounding Box
pointcloudToBB( p, dim, Tf );
// Store (cube)
pcl::PointCloud<pcl::PointXYZ>::Ptr pts( new pcl::PointCloud<pcl::PointXYZ>() );
pcl::PointCloud<pcl::PointXYZ>::Ptr final( new pcl::PointCloud<pcl::PointXYZ>() );
pts = sampleSQ_uniform( dim[0]/2, dim[1]/2, dim[2]/2, 0.1, 0.1 );
pcl::transformPointCloud( *pts, *final, Tf.matrix() );
char name[50];
sprintf( name, "bb_%d.pcd", i);
pcl::io::savePCDFileASCII(name, *final );
}
}
//==============================================================================
dart::dynamics::SkeletonPtr loadSkeletonFromURDF(
const dart::common::ResourceRetrieverPtr& retriever,
const dart::common::Uri& uri,
const Eigen::Isometry3d& transform)
{
dart::utils::DartLoader urdfLoader;
const dart::dynamics::SkeletonPtr skeleton
= urdfLoader.parseSkeleton(uri, retriever);
if (!skeleton)
throw std::runtime_error("Unable to load '" + uri.toString() + "'");
if (skeleton->getNumJoints() == 0)
throw std::runtime_error("Skeleton is empty.");
if (!transform.matrix().isIdentity())
{
auto freeJoint
= dynamic_cast<dart::dynamics::FreeJoint*>(skeleton->getRootJoint());
if (!freeJoint)
throw std::runtime_error(
"Unable to cast Skeleton's root joint to FreeJoint.");
freeJoint->setTransform(transform);
}
return skeleton;
}
void
pcl::simulation::RangeLikelihood::applyCameraTransform (const Eigen::Isometry3d & pose)
{
float T[16];
Eigen::Matrix4f m = (pose.matrix ().inverse ()).cast<float> ();
T[0] = m(0,0); T[4] = m(0,1); T[8] = m(0,2); T[12] = m(0,3);
T[1] = m(1,0); T[5] = m(1,1); T[9] = m(1,2); T[13] = m(1,3);
T[2] = m(2,0); T[6] = m(2,1); T[10] = m(2,2); T[14] = m(2,3);
T[3] = m(3,0); T[7] = m(3,1); T[11] = m(3,2); T[15] = m(3,3);
glMultMatrixf(T);
}
void TestFKIKFK()
{
int arm = RIGHT;
// Create random legitimate joint values
std::vector<RobotKin::Joint*> joints = kinematics->linkage("RightArm").joints();
for (int i = 0; i < joints.size(); i++)
{
double jointVal = randbetween(joints[i]->min(), joints[i]->max());
kinematics->joint(joints[i]->name()).value(jointVal);
}
// Do FK to get ee pose
Eigen::Isometry3d initialFrame;
initialFrame = kinematics->linkage("RightArm").tool().respectToRobot();
// Do IK to get joints
DrcHuboKin::ArmVector q = DrcHuboKin::ArmVector::Zero();
RobotKin::rk_result_t result = kinematics->armIK(arm, q, initialFrame);
std::cerr << "Solver result: " << result << std::endl;
CPPUNIT_ASSERT(RobotKin::RK_SOLVED == result);
// Do FK and verify that it's pretty much the same
int baseJoint = 0;
if (LEFT == arm)
{ baseJoint = LSP; }
else if (RIGHT == arm)
{ baseJoint = RSP; }
for (int i = baseJoint; i < baseJoint+7; i++)
{
//kinematics->joint(DRCHUBO_URDF_JOINT_NAMES[i]).value(q[DRCHUBO_JOINT_INDEX_TO_LIMB_POSITION[i]]);
}
Eigen::Isometry3d finalFrame;
finalFrame = kinematics->linkage("RightArm").tool().respectToRobot();
//CPPUNIT_ASSERT((initialFrame.matrix() - finalFrame.matrix()).norm() < 0.001);
std::cerr << "Inital pose: \n" << initialFrame.matrix() << std::endl;
std::cerr << "Final pose: \n" << finalFrame.matrix() << std::endl;
}
Eigen::Isometry3d transformEstimation(const Mat& rgb1,const Mat& rgb2,const Mat& depth1,const Mat& depth2,const CAMERA_INTRINSIC_PARAMETERS& C)
{
vector<KeyPoint> keyPts1,keyPts2;
Mat descriptors1,descriptors2;
extractKeypointsAndDescripotrs(rgb1,rgb2,keyPts1,keyPts2,descriptors1,descriptors2);
vector<DMatch> matches;
descriptorsMatch(rgb1,rgb2,keyPts1,keyPts2,descriptors1,descriptors2,matches);
vector<Point2f> points;
vector<Point3f> objectPoints;
vector<Eigen::Vector2d> imagePoints1,imagePoints2;
getObjectPointsAndImagePoints(depth1,depth2,keyPts1,keyPts2,matches,points,objectPoints,imagePoints1,imagePoints2,C);
Mat translation,rotation;
double camera_matrix_data[3][3] = {
{C.fx, 0, C.cx},
{0, C.fy, C.cy},
{0, 0, 1} };
Mat cameraMatrix(3,3,CV_64F,camera_matrix_data);
solvePnPRansac(objectPoints,points,cameraMatrix,Mat(),rotation,translation,false, 100, 1.0, 20);
Mat rot;
Rodrigues(rotation,rot);
Eigen::Matrix3d r;
Eigen::Vector3d t;
cout<<rot<<endl;
cout<<translation<<endl;
r<< ((double*)rot.data)[0],((double*)rot.data)[1],((double*)rot.data)[2],
((double*)rot.data)[3],((double*)rot.data)[4],((double*)rot.data)[5],
((double*)rot.data)[6],((double*)rot.data)[7],((double*)rot.data)[8];
t<<((double*)translation.data)[0],((double*)translation.data)[1],((double*)translation.data)[2];
Eigen::Isometry3d T = Eigen::Isometry3d::Identity();
T.rotate(r);
T.pretranslate(t);
cout<<T.matrix()<<endl;
BundleAdjustmentOptimization(objectPoints,imagePoints1,imagePoints2);
return T;
}
int GraphicEnd2::run()
{
cout<<"********************"<<endl;
_present.planes.clear();
readimage();
_present.planes.push_back( extractKPandDesp( _currRGB, _currDep ) );
_present.frame_index = _index;
RESULT_OF_MULTIPNP result = multiPnP( _currKF.planes, _present.planes, _currKF.frame_index, _present.frame_index );
Eigen::Isometry3d T = result.T.inverse();
if (T.matrix() == Eigen::Isometry3d::Identity().matrix())
{
//匹配失败
cout<<BOLDRED"This frame is lost"<<RESET<<endl;
_lost++;
}
else if (result.norm > _max_pos_change)
{
//生成新关键帧
_robot = T*_kf_pos;
generateKeyFrame(T);
if (_loop_closure_detection == true)
loopClosure();
_lost = 0;
}
else
{
//位置变化小
_robot = T*_kf_pos;
_lost = 0;
}
if (_lost > _lost_frames)
{
cerr<<"the robot is lost, perform lost recovery"<<endl;
lostRecovery();
}
cout<<RED"keyframe size = "<<_keyframes.size()<<RESET<<endl;
_index++;
if (_use_odometry )
{
_odo_this = _odometry[_index - 1];
}
return 0;
}
GTEST_TEST(TestLcmUtil, testPose) {
default_random_engine generator;
generator.seed(0);
Eigen::Isometry3d pose;
pose.linear() = drake::math::UniformlyRandomRotmat(generator);
pose.translation().setLinSpaced(0, drake::kSpaceDimension);
pose.makeAffine();
const Eigen::Isometry3d& const_pose = pose;
bot_core::position_3d_t msg;
EncodePose(const_pose, msg);
Eigen::Isometry3d pose_back = DecodePose(msg);
EXPECT_TRUE(CompareMatrices(pose.matrix(), pose_back.matrix(), 1e-12,
MatrixCompareType::absolute));
}
cv::Point2f FeatureMatcher::point3Dto2D(
cv::Point3f& point_xyz,
const Eigen::Isometry3d & trans )
{
cv::Point2f p; // 3D 点
Eigen::Vector4d p_xyz1( point_xyz.x, point_xyz.y, point_xyz.z, 1 );
//变换到参考坐标系下
Eigen::Matrix<double, 3, 4> K = pCamera->toProjectionMatrix();
Eigen::Vector3d p_uvw = K * trans.matrix() * p_xyz1;
p.x = p_uvw(0) / p_uvw(2);
p.y = p_uvw(1) / p_uvw(2);
return p;
}
//==============================================================================
void ShapeNode::setRelativeTransform(const Eigen::Isometry3d& transform)
{
if(transform.matrix() == FixedFrame::mAspectProperties.mRelativeTf.matrix())
return;
const Eigen::Isometry3d oldTransform = getRelativeTransform();
FixedFrame::setRelativeTransform(transform);
dirtyJacobian();
dirtyJacobianDeriv();
mRelativeTransformUpdatedSignal.raise(
this, oldTransform, getRelativeTransform());
}
void FeatureTransformationEstimator::estimatePoseSVD(Eigen::MatrixXd P, Eigen::MatrixXd Q, Eigen::Isometry3d &T)
{
pcl::TransformationFromCorrespondences tfc;
for (int i = 0; i < P.cols(); i++) {
Eigen::Vector3f p_i = P.col(i).cast<float>();
Eigen::Vector3f q_i = Q.col(i).cast<float>();
float inverse_weight = p_i(2)*p_i(2) + q_i(2)*q_i(2);
float weight = 1;
if (inverse_weight > 0) {
weight = 1. / weight;
}
tfc.add(p_i, q_i, weight);
}
T.matrix() = tfc.getTransformation().matrix().cast<double>();
// T.matrix() = Eigen::umeyama(P, Q, false);
}
int main()
{
Fastrak fastrak;
Eigen::Isometry3d pose;
while (true)
{
fastrak.achUpdate();
for (int i = 0; i < fastrak.getNumChannels(); i++)
{
fastrak.getPose(pose, i, false);
std::cout << "Sensor " << i << ": " << std::endl;
std::cout << pose.matrix() << std::endl;
}
boost::this_thread::sleep( boost::posix_time::milliseconds(1000) );
}
return 0;
}
int main(int argc, char** argv)
{
ROS_INFO("Tracker Started.");
ros::init(argc, argv, "simple_tracker");
ros::NodeHandle nh;
ros::ServiceClient poseClient = nh.serviceClient<HuboApplication::SetHuboArmPose>("/hubo/set_arm");
ros::Rate loop_rate(0.1);
while (ros::ok())
{
/*double x = randbetween(X_MIN, X_MAX);
double y = randbetween(Y_MIN, Y_MAX);
double z = randbetween(Z_MIN, Z_MAX);*/
Eigen::Isometry3d ePose;
tf::StampedTransform tPose;
HuboApplication::SetHuboArmPose srv;
ePose.matrix() << 1, 0, 0, .3,
0, 1, 0, .2,
0, 0, 1, 0,
0, 0, 0, 1;
ePose.rotate(Eigen::AngleAxisd(-M_PI/2, Eigen::Vector3d::UnitZ()));
ePose.rotate(Eigen::AngleAxisd(M_PI, Eigen::Vector3d::UnitX()));
/*
Collision_Checker cc;
cc.initCollisionChecker();
cc.checkSelfCollision(ePose);
tf::TransformEigenToTF(ePose, tPose);
tf::poseTFToMsg(tPose, srv.request.Target);
srv.request.ArmIndex = 1;
poseClient.call(srv);
*/
ros::spinOnce();
loop_rate.sleep();
}
ros::spin();
return 0;
}
PointCloud::Ptr joinPointCloud( PointCloud::Ptr original, FRAME& newFrame, Eigen::Isometry3d T, CAMERA_INTRINSIC_PARAMETERS& camera ){
PointCloud::Ptr newCloud = image2PointCloud(newFrame.rgb,newFrame.depth,camera);
// 合并点云
PointCloud::Ptr output(new PointCloud());
pcl::transformPointCloud(*original,*output,T.matrix());
*newCloud += *output;
// Voxel grid 滤波降采样
static pcl::VoxelGrid<PointT> voxel;
static ParameterReader pd;
double gridsize = atof(pd.getData("voxel_grid").c_str());
voxel.setLeafSize(gridsize,gridsize,gridsize);
voxel.setInputCloud(newCloud);
PointCloud::Ptr tmp(new PointCloud());
voxel.filter(*tmp);
return tmp;
}
Mapper::PointCloud::Ptr Mapper::generatePointCloud(const RGBDFrame::Ptr &frame)
{
PointCloud::Ptr tmp( new PointCloud() );
if ( frame->pointcloud == nullptr )
{
// point cloud is null ptr
frame->pointcloud = boost::make_shared<PointCloud>();
#pragma omp parallel for
for ( int m=0; m<frame->depth.rows; m+=3 )
{
for ( int n=0; n<frame->depth.cols; n+=3 )
{
ushort d = frame->depth.ptr<ushort>(m)[n];
if (d == 0)
continue;
if (d > max_distance * frame->camera.scale)
continue;
PointT p;
cv::Point3f p_cv = frame->project2dTo3d(n, m);
p.b = frame->rgb.ptr<uchar>(m)[n*3];
p.g = frame->rgb.ptr<uchar>(m)[n*3+1];
p.r = frame->rgb.ptr<uchar>(m)[n*3+2];
p.x = p_cv.x;
p.y = p_cv.y;
p.z = p_cv.z;
frame->pointcloud->points.push_back( p );
}
}
}
Eigen::Isometry3d T = frame->getTransform().inverse();
pcl::transformPointCloud( *frame->pointcloud, *tmp, T.matrix());
tmp->is_dense = false;
return tmp;
}
void
pcl::simulation::RangeLikelihood::getPointCloud (pcl::PointCloud<pcl::PointXYZRGB>::Ptr pc,
bool make_global,
const Eigen::Isometry3d & pose)
{
// TODO: check if this works for for rows/cols >1 and for width&height != 640x480
// i.e. multiple tiled images
pc->width = col_width_;
pc->height = row_height_;
// Was:
//pc->width = camera_width_;
//pc->height = camera_height_;
pc->is_dense = false;
pc->points.resize (pc->width*pc->height);
int points_added = 0;
float camera_fx_reciprocal_ = 1.0f / camera_fx_;
float camera_fy_reciprocal_ = 1.0f / camera_fy_;
float zn = z_near_;
float zf = z_far_;
const uint8_t* color_buffer = getColorBuffer();
// TODO: support decimation
// Copied the format of RangeImagePlanar::setDepthImage()
// Use this as a template for decimation
for (int y = 0; y < row_height_ ; ++y) //camera_height_
{
for (int x = 0; x < col_width_ ; ++x) // camera_width_
{
// Find XYZ from normalized 0->1 mapped disparity
int idx = points_added; // y*camera_width_ + x;
float d = depth_buffer_[y*camera_width_ + x] ;
if (d < 1.0) // only add points with depth buffer less than max (20m) range
{
float z = zf*zn/((zf-zn)*(d - zf/(zf-zn)));
// TODO: add mode to ignore points with no return i.e. depth_buffer_ ==1
// NB: OpenGL uses a Right Hand system with +X right, +Y up, +Z back out of the screen,
// The Z-buffer is natively -1 (far) to 1 (near)
// But in this class we invert this to be 0 (near, 0.7m) and 1 (far, 20m)
// ... so by negating y we get to a right-hand computer vision system
// which is also used by PCL and OpenNi
pc->points[idx].z = z;
pc->points[idx].x = (static_cast<float> (x)-camera_cx_) * z * (-camera_fx_reciprocal_);
pc->points[idx].y = (static_cast<float> (y)-camera_cy_) * z * (-camera_fy_reciprocal_);
int rgb_idx = y*col_width_ + x; //camera_width_
pc->points[idx].b = color_buffer[rgb_idx*3+2]; // blue
pc->points[idx].g = color_buffer[rgb_idx*3+1]; // green
pc->points[idx].r = color_buffer[rgb_idx*3]; // red
points_added++;
}
}
}
pc->width = 1;
pc->height = points_added;
pc->points.resize (points_added);
if (make_global)
{
// Go from OpenGL to (Z-up, X-forward, Y-left)
Eigen::Matrix4f T;
T << 0, 0, -1, 0,
-1, 0, 0, 0,
0, 1, 0, 0,
0, 0, 0, 1;
Eigen::Matrix4f m = pose.matrix ().cast<float> ();
m = m * T;
pcl::transformPointCloud (*pc, *pc, m);
}
else
{
// Go from OpenGL to Camera (Z-forward, X-right, Y-down)
Eigen::Matrix4f T;
T << 1, 0, 0, 0,
0, -1, 0, 0,
0, 0, -1, 0,
0, 0, 0, 1;
pcl::transformPointCloud (*pc, *pc, T);
// Go from Camera to body (Z-up, X-forward, Y-left)
Eigen::Matrix4f cam_to_body;
cam_to_body << 0, 0, 1, 0,
-1, 0, 0, 0,
0, -1, 0, 0,
0, 0, 0, 1;
Eigen::Matrix4f camera = pose.matrix ().cast<float> ();
camera = camera * cam_to_body;
pc->sensor_origin_ = camera.rightCols (1);
Eigen::Quaternion<float> quat (camera.block<3,3> (0,0));
pc->sensor_orientation_ = quat;
}
}
int main ( int argc, char** argv )
{
if ( argc != 2 )
{
cout<<"用法：./direct_sparse path_to_dataset"<<endl;
return 1;
}
srand ( ( unsigned int ) time ( 0 ) );//随机数
string path_to_dataset = argv[1];
string associate_file = path_to_dataset + "/associate.txt";
ifstream fin ( associate_file );
string rgb_file, depth_file, time_rgb, time_depth;
//rgb图像对应时间 rgb图像 深度图像对应时间 深度图像
cv::Mat color, depth, gray;// 彩色图 深度图 灰度图
vector<Measurement> measurements;
// 相机内参
float cx = 325.5;
float cy = 253.5;
float fx = 518.0;
float fy = 519.0;
float depth_scale = 1000.0;// mm 变成 m
Eigen::Matrix3f K;
K<<fx,0.f,cx,0.f,fy,cy,0.f,0.f,1.0f;
Eigen::Isometry3d Tcw = Eigen::Isometry3d::Identity();//相机位姿 [R t] 的齐次表示 4*4
cv::Mat prev_color;
// 我们以第一个图像为参考，对后续图像和参考图像做直接法
for ( int index=0; index<10; index++ )
{
cout<<"*********** loop "<<index<<" ************"<<endl;
fin>>time_rgb>>rgb_file>>time_depth>>depth_file;
color = cv::imread ( path_to_dataset+"/"+rgb_file );// rgb 图像
depth = cv::imread ( path_to_dataset+"/"+depth_file, -1 );// 深度图
if ( color.data==nullptr || depth.data==nullptr )
continue;
cv::cvtColor ( color, gray, cv::COLOR_BGR2GRAY );//彩色图到灰度图
if ( index ==0 )//第一帧
{
// 对第一帧提取FAST特征点
vector<cv::KeyPoint> keypoints;
cv::Ptr<cv::FastFeatureDetector> detector = cv::FastFeatureDetector::create();
detector->detect ( color, keypoints );//检测 特征点
for ( auto kp:keypoints )
{
// 去掉邻近图像边缘处的点
if ( kp.pt.x < 20 || kp.pt.y < 20 || ( kp.pt.x+20 ) >color.cols || ( kp.pt.y+20 ) >color.rows )
continue;//跳过以下
ushort d = depth.ptr<ushort> ( cvRound ( kp.pt.y ) ) [ cvRound ( kp.pt.x ) ];//对于特征点的深度
if ( d==0 )
continue;//跳过
Eigen::Vector3d p3d = project2Dto3D ( kp.pt.x, kp.pt.y, d, fx, fy, cx, cy, depth_scale );//2D像素坐标 转换成 相机坐标系下的 三维点 3D
float grayscale = float ( gray.ptr<uchar> ( cvRound ( kp.pt.y ) ) [ cvRound ( kp.pt.x ) ] );//特征点 对应的灰度值 坐标值为整数 需要取整
measurements.push_back ( Measurement ( p3d, grayscale ) );//测量值为 三维点 和 对应图像的灰度值
}
prev_color = color.clone();//赋值 图像
continue;//第一幅图 跳过 以下
}
// 使用直接法计算相机运动
chrono::steady_clock::time_point t1 = chrono::steady_clock::now();//计时开始
poseEstimationDirect ( measurements, &gray, K, Tcw );//测量值
chrono::steady_clock::time_point t2 = chrono::steady_clock::now();//计时结束
chrono::duration<double> time_used = chrono::duration_cast<chrono::duration<double>> ( t2-t1 );
cout<<"直接法耗时 direct method costs time: "<<time_used.count() <<" seconds."<<endl;
cout<<"转换矩阵 Tcw="<<Tcw.matrix() <<endl;
// 画特征点 plot the feature points
cv::Mat img_show ( color.rows*2, color.cols, CV_8UC3 );
prev_color.copyTo ( img_show ( cv::Rect ( 0,0,color.cols, color.rows ) ) );
color.copyTo ( img_show ( cv::Rect ( 0,color.rows,color.cols, color.rows ) ) );
for ( Measurement m:measurements )
{
if ( rand() > RAND_MAX/5 )
continue;
Eigen::Vector3d p = m.pos_world;//测量值的 三维点 p
Eigen::Vector2d pixel_prev = project3Dto2D ( p ( 0,0 ), p ( 1,0 ), p ( 2,0 ), fx, fy, cx, cy );//转换成 2d像素坐标
Eigen::Vector3d p2 = Tcw*m.pos_world;//变换到 第二帧图像的坐标系下
Eigen::Vector2d pixel_now = project3Dto2D ( p2 ( 0,0 ), p2 ( 1,0 ), p2 ( 2,0 ), fx, fy, cx, cy );//转化成 2d像素坐标
if ( pixel_now(0,0)<0 || pixel_now(0,0)>=color.cols || pixel_now(1,0)<0 || pixel_now(1,0)>=color.rows )// 超出范围的 跳过
continue;
float b = 255*float ( rand() ) /RAND_MAX;//随机颜色 分量
float g = 255*float ( rand() ) /RAND_MAX;
float r = 255*float ( rand() ) /RAND_MAX;
cv::circle ( img_show, cv::Point2d ( pixel_prev ( 0,0 ), pixel_prev ( 1,0 ) ), 8, cv::Scalar ( b,g,r ), 2 );
cv::circle ( img_show, cv::Point2d ( pixel_now ( 0,0 ), pixel_now ( 1,0 ) +color.rows ), 8, cv::Scalar ( b,g,r ), 2 );
cv::line ( img_show, cv::Point2d ( pixel_prev ( 0,0 ), pixel_prev ( 1,0 ) ), cv::Point2d ( pixel_now ( 0,0 ), pixel_now ( 1,0 ) +color.rows ), cv::Scalar ( b,g,r ), 1 );
}
cv::imshow ( "result", img_show );
cv::waitKey ( 0 );//等待按键
}
return 0;
}
TEST(LIE_GROUP_OPERATORS, ADJOINT_MAPPINGS)
{
int numTest = 100;
// AdT(V) == T * V * InvT
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Vector6d V = Eigen::Vector6d::Random();
Eigen::Vector6d AdTV = AdT(T, V);
// Ad(T, V) = T * [V] * InvT
Eigen::Matrix4d T_V_InvT = T.matrix() * toMatrixForm(V) * T.inverse().matrix();
Eigen::Vector6d T_V_InvT_se3 = fromMatrixForm(T_V_InvT);
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(AdTV(j), T_V_InvT_se3(j), LIE_GROUP_OPT_TOL);
// Ad(T, V) = [R 0; [p]R R] * V
Eigen::Matrix6d AdTMatrix = Eigen::Matrix6d::Zero();
AdTMatrix.topLeftCorner<3,3>() = T.linear();
AdTMatrix.bottomRightCorner<3,3>() = T.linear();
AdTMatrix.bottomLeftCorner<3,3>() = math::makeSkewSymmetric(T.translation()) * T.linear();
Eigen::Vector6d AdTMatrix_V = AdTMatrix * V;
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(AdTV(j), AdTMatrix_V(j), LIE_GROUP_OPT_TOL);
}
// AdR == AdT([R 0; 0 1], V)
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Isometry3d R = Eigen::Isometry3d::Identity();
R = T.linear();
Eigen::Vector6d V = Eigen::Vector6d::Random();
Eigen::Vector6d AdTV = AdT(R, V);
Eigen::Vector6d AdRV = AdR(T, V);
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(AdTV(j), AdRV(j), LIE_GROUP_OPT_TOL);
}
// AdTAngular == AdT(T, se3(w, 0))
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Vector3d w = Eigen::Vector3d::Random();
Eigen::Vector6d V = Eigen::Vector6d::Zero();
V.head<3>() = w;
Eigen::Vector6d AdTV = AdT(T, V);
Eigen::Vector6d AdTAng = AdTAngular(T, w);
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(AdTV(j), AdTAng(j), LIE_GROUP_OPT_TOL);
}
// AdTLinear == AdT(T, se3(w, 0))
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Vector3d v = Eigen::Vector3d::Random();
Eigen::Vector6d V = Eigen::Vector6d::Zero();
V.tail<3>() = v;
Eigen::Vector6d AdTV = AdT(T, V);
Eigen::Vector6d AdTLin = AdTLinear(T, v);
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(AdTV(j), AdTLin(j), LIE_GROUP_OPT_TOL);
}
// AdTJac
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Vector3d v = Eigen::Vector3d::Random();
Eigen::Vector6d V = Eigen::Vector6d::Zero();
V.tail<3>() = v;
Eigen::Vector6d AdTV = AdT(T, V);
Eigen::Vector6d AdTLin = AdTLinear(T, v);
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(AdTV(j), AdTLin(j), LIE_GROUP_OPT_TOL);
}
// AdInvT
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Isometry3d InvT = T.inverse();
Eigen::Vector6d V = Eigen::Vector6d::Random();
Eigen::Vector6d Ad_InvT = AdT(InvT, V);
Eigen::Vector6d AdInv_T = AdInvT(T, V);
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(Ad_InvT(j), AdInv_T(j), LIE_GROUP_OPT_TOL);
}
// AdInvRLinear
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Vector3d v = Eigen::Vector3d::Random();
Eigen::Vector6d V = Eigen::Vector6d::Zero();
V.tail<3>() = v;
Eigen::Isometry3d R = Eigen::Isometry3d::Identity();
R = T.linear();
Eigen::Vector6d AdT_ = AdT(R.inverse(), V);
Eigen::Vector6d AdInvRLinear_ = AdInvRLinear(T, v);
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(AdT_(j), AdInvRLinear_(j), LIE_GROUP_OPT_TOL);
}
// dAdT
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Vector6d F = Eigen::Vector6d::Random();
Eigen::Vector6d dAdTF = dAdT(T, F);
// dAd(T, F) = [R 0; [p]R R]^T * F
Eigen::Matrix6d AdTMatrix = Eigen::Matrix6d::Zero();
AdTMatrix.topLeftCorner<3,3>() = T.linear();
AdTMatrix.bottomRightCorner<3,3>() = T.linear();
AdTMatrix.bottomLeftCorner<3,3>() = math::makeSkewSymmetric(T.translation()) * T.linear();
Eigen::Vector6d AdTTransMatrix_V = AdTMatrix.transpose() * F;
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(dAdTF(j), AdTTransMatrix_V(j), LIE_GROUP_OPT_TOL);
}
// dAdInvT
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Isometry3d InvT = T.inverse();
Eigen::Vector6d F = Eigen::Vector6d::Random();
Eigen::Vector6d dAdInvT_F = dAdInvT(T, F);
//
Eigen::Vector6d dAd_InvTF = dAdT(InvT, F);
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(dAdInvT_F(j), dAd_InvTF(j), LIE_GROUP_OPT_TOL);
// dAd(T, F) = [R 0; [p]R R]^T * F
Eigen::Matrix6d AdInvTMatrix = Eigen::Matrix6d::Zero();
AdInvTMatrix.topLeftCorner<3,3>() = InvT.linear();
AdInvTMatrix.bottomRightCorner<3,3>() = InvT.linear();
AdInvTMatrix.bottomLeftCorner<3,3>() = math::makeSkewSymmetric(InvT.translation()) * InvT.linear();
Eigen::Vector6d AdInvTTransMatrix_V = AdInvTMatrix.transpose() * F;
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(dAdInvT_F(j), AdInvTTransMatrix_V(j), LIE_GROUP_OPT_TOL);
}
// dAdInvR
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d t = Eigen::Vector6d::Random();
Eigen::Isometry3d T = math::expMap(t);
Eigen::Isometry3d InvT = T.inverse();
Eigen::Isometry3d InvR = Eigen::Isometry3d::Identity();
InvR = InvT.linear();
Eigen::Vector6d F = Eigen::Vector6d::Random();
Eigen::Vector6d dAdInvR_F = dAdInvR(T, F);
//
Eigen::Vector6d dAd_InvTF = dAdT(InvR, F);
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(dAdInvR_F(j), dAd_InvTF(j), LIE_GROUP_OPT_TOL);
}
// ad
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d V = Eigen::Vector6d::Random();
Eigen::Vector6d W = Eigen::Vector6d::Random();
Eigen::Vector6d ad_V_W = ad(V, W);
//
Eigen::Matrix6d adV_Matrix = Eigen::Matrix6d::Zero();
adV_Matrix.topLeftCorner<3,3>() = math::makeSkewSymmetric(V.head<3>());
adV_Matrix.bottomRightCorner<3,3>() = math::makeSkewSymmetric(V.head<3>());
adV_Matrix.bottomLeftCorner<3,3>() = math::makeSkewSymmetric(V.tail<3>());
Eigen::Vector6d adV_Matrix_W = adV_Matrix * W;
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(ad_V_W(j), adV_Matrix_W(j), LIE_GROUP_OPT_TOL);
}
// dad
for (int i = 0; i < numTest; ++i)
{
Eigen::Vector6d V = Eigen::Vector6d::Random();
Eigen::Vector6d F = Eigen::Vector6d::Random();
Eigen::Vector6d dad_V_F = dad(V, F);
//
Eigen::Matrix6d dadV_Matrix = Eigen::Matrix6d::Zero();
dadV_Matrix.topLeftCorner<3,3>() = math::makeSkewSymmetric(V.head<3>());
dadV_Matrix.bottomRightCorner<3,3>() = math::makeSkewSymmetric(V.head<3>());
dadV_Matrix.bottomLeftCorner<3,3>() = math::makeSkewSymmetric(V.tail<3>());
Eigen::Vector6d dadV_Matrix_F= dadV_Matrix.transpose() * F;
for (int j = 0; j < 6; ++j)
EXPECT_NEAR(dad_V_F(j), dadV_Matrix_F(j), LIE_GROUP_OPT_TOL);
}
}
const std::shared_ptr< std::vector< CLandmark* > > CTrackerStereoMotionModel::_getNewLandmarks( const UIDFrame& p_uFrame,
cv::Mat& p_matDisplay,
const cv::Mat& p_matImageLEFT,
const cv::Mat& p_matImageRIGHT,
const Eigen::Isometry3d& p_matTransformationWORLDtoLEFT,
const Eigen::Isometry3d& p_matTransformationLEFTtoWORLD,
const Eigen::Vector3d& p_vecRotation )
{
//ds precompute extrinsics
const MatrixProjection matProjectionWORLDtoLEFT( m_pCameraLEFT->m_matProjection*p_matTransformationWORLDtoLEFT.matrix( ) );
//ds solution holder
std::shared_ptr< std::vector< CLandmark* > > vecNewLandmarks( std::make_shared< std::vector< CLandmark* > >( ) );
//ds detect new keypoints
//const std::shared_ptr< std::vector< cv::KeyPoint > > vecKeyPoints( m_cDetector.detectKeyPointsTilewise( p_matImageLEFT, matMask ) );
std::vector< cv::KeyPoint > vecKeyPoints;
m_pDetector->detect( p_matImageLEFT, vecKeyPoints, m_cMatcher.getMaskActiveLandmarks( p_matTransformationWORLDtoLEFT, p_matDisplay ) );
//ds compute descriptors for the keypoints
CDescriptor matReferenceDescriptors;
//m_pExtractor->compute( p_matImageLEFT, *vecKeyPoints, matReferenceDescriptors );
m_pExtractor->compute( p_matImageLEFT, vecKeyPoints, matReferenceDescriptors );
//ds process the keypoints and see if we can use them as landmarks
for( uint32_t u = 0; u < vecKeyPoints.size( ); ++u )
{
//ds current points
const cv::KeyPoint cKeyPointLEFT( vecKeyPoints[u] );
const cv::Point2f ptLandmarkLEFT( cKeyPointLEFT.pt );
const CDescriptor matDescriptorLEFT( matReferenceDescriptors.row(u) );
try
{
//ds triangulate the point
const CMatchTriangulation cMatch( m_pTriangulator->getPointTriangulatedCompactInRIGHT( p_matImageRIGHT, cKeyPointLEFT, matDescriptorLEFT ) );
const CPoint3DCAMERA vecPointTriangulatedLEFT( cMatch.vecPointXYZCAMERA );
const CDescriptor matDescriptorRIGHT( cMatch.matDescriptorCAMERA );
//ds check depth
const double dDepthMeters( vecPointTriangulatedLEFT.z( ) );
//ds check if point is in front of camera an not more than a defined distance away
if( m_dMinimumDepthMeters < dDepthMeters && m_dMaximumDepthMeters > dDepthMeters )
{
//ds compute triangulated point in world frame
const CPoint3DWORLD vecPointTriangulatedWORLD( p_matTransformationLEFTtoWORLD*vecPointTriangulatedLEFT );
//ds landmark right
const cv::Point2f ptLandmarkRIGHT( cMatch.ptUVCAMERA );
//ds allocate a new landmark and add the current position
CLandmark* pLandmark( new CLandmark( m_uAvailableLandmarkID,
matDescriptorLEFT,
cMatch.matDescriptorCAMERA,
cKeyPointLEFT.size,
vecPointTriangulatedWORLD,
m_pCameraLEFT->getNormalHomogenized( ptLandmarkLEFT ),
ptLandmarkLEFT,
ptLandmarkRIGHT,
vecPointTriangulatedLEFT,
p_matTransformationLEFTtoWORLD.translation( ),
p_vecRotation,
matProjectionWORLDtoLEFT,
p_uFrame ) );
//ds log creation
CLogger::CLogLandmarkCreation::addEntry( p_uFrame, pLandmark, dDepthMeters, ptLandmarkLEFT, ptLandmarkRIGHT );
//ds add to newly detected
vecNewLandmarks->push_back( pLandmark );
//ds next landmark id
++m_uAvailableLandmarkID;
//ds draw detected point
cv::line( p_matDisplay, ptLandmarkLEFT, cv::Point2f( ptLandmarkLEFT.x+m_pCameraSTEREO->m_uPixelWidth, ptLandmarkLEFT.y ), CColorCodeBGR( 175, 175, 175 ) );
cv::circle( p_matDisplay, ptLandmarkLEFT, 2, CColorCodeBGR( 0, 255, 0 ), -1 );
//cv::circle( p_matDisplay, ptLandmarkLEFT, cLandmark->dKeyPointSize, CColorCodeBGR( 255, 0, 0 ), 1 );
cv::putText( p_matDisplay, std::to_string( pLandmark->uID ) , cv::Point2d( ptLandmarkLEFT.x+pLandmark->dKeyPointSize, ptLandmarkLEFT.y+pLandmark->dKeyPointSize ), cv::FONT_HERSHEY_PLAIN, 0.5, CColorCodeBGR( 0, 0, 255 ) );
//ds draw reprojection of triangulation
cv::circle( p_matDisplay, cv::Point2d( ptLandmarkRIGHT.x+m_pCameraSTEREO->m_uPixelWidth, ptLandmarkRIGHT.y ), 2, CColorCodeBGR( 255, 0, 0 ), -1 );
}
else
{
cv::circle( p_matDisplay, ptLandmarkLEFT, 2, CColorCodeBGR( 0, 0, 255 ), -1 );
//cv::circle( p_matDisplay, ptLandmarkLEFT, cKeyPoint.size, CColorCodeBGR( 0, 0, 255 ) );
//std::printf( "<CTrackerStereoMotionModel>(_getNewLandmarks) could not find match for keypoint (invalid depth: %f m)\n", vecPointTriangulatedLEFT(2) );
}
}
catch( const CExceptionNoMatchFound& p_cException )
{
cv::circle( p_matDisplay, ptLandmarkLEFT, 2, CColorCodeBGR( 0, 0, 255 ), -1 );
//cv::circle( p_matDisplay, ptLandmarkLEFT, cKeyPoint.size, CColorCodeBGR( 0, 0, 255 ) );
//std::printf( "<CTrackerStereoMotionModel>(_getNewLandmarks) could not find match for keypoint (%s)\n", p_cException.what( ) );
}
}
//std::printf( "<CTrackerStereoMotionModel>(_getNewLandmarks) added new landmarks: %lu/%lu\n", vecNewLandmarks->size( ), vecKeyPoints.size( ) );
//ds return found landmarks
return vecNewLandmarks;
}
int main( int argc, char** argv )
{
// 调用格式：命令 [第一个图] [第二个图]
if (argc != 3)
{
cout<<"Usage: ba_example img1, img2"<<endl;
exit(1);
}
// 读取图像
cv::Mat img1 = cv::imread( argv[1] );
cv::Mat img2 = cv::imread( argv[2] );
// 找到对应点
vector<cv::Point2f> pts1, pts2;
if ( findCorrespondingPoints( img1, img2, pts1, pts2 ) == false )
{
cout<<"匹配点不够！"<<endl;
return 0;
}
cout<<"找到了"<<pts1.size()<<"组对应特征点。"<<endl;
// 构造g2o中的图
// 先构造求解器
g2o::SparseOptimizer optimizer;
// 使用Cholmod中的线性方程求解器
g2o::BlockSolver_6_3::LinearSolverType* linearSolver = new g2o::LinearSolverCholmod<g2o::BlockSolver_6_3::PoseMatrixType> ();
// 6*3 的参数
g2o::BlockSolver_6_3* block_solver = new g2o::BlockSolver_6_3( linearSolver );
// L-M 下降
g2o::OptimizationAlgorithmLevenberg* algorithm = new g2o::OptimizationAlgorithmLevenberg( block_solver );
optimizer.setAlgorithm( algorithm );
optimizer.setVerbose( false );
// 添加节点
// 两个位姿节点
for ( int i=0; i<2; i++ )
{
g2o::VertexSE3Expmap* v = new g2o::VertexSE3Expmap();
v->setId(i);
if ( i == 0)
v->setFixed( true ); // 第一个点固定为零
// 预设值为单位Pose，因为我们不知道任何信息
v->setEstimate( g2o::SE3Quat() );
optimizer.addVertex( v );
}
// 很多个特征点的节点
// 以第一帧为准
for ( size_t i=0; i<pts1.size(); i++ )
{
g2o::VertexSBAPointXYZ* v = new g2o::VertexSBAPointXYZ();
v->setId( 2 + i );
// 由于深度不知道，只能把深度设置为1了
double z = 1;
double x = ( pts1[i].x - cx ) * z / fx;
double y = ( pts1[i].y - cy ) * z / fy;
v->setMarginalized(true);
v->setEstimate( Eigen::Vector3d(x,y,z) );
optimizer.addVertex( v );
}
// 准备相机参数
g2o::CameraParameters* camera = new g2o::CameraParameters( fx, Eigen::Vector2d(cx, cy), 0 );
camera->setId(0);
optimizer.addParameter( camera );
// 准备边
// 第一帧
vector<g2o::EdgeProjectXYZ2UV*> edges;
for ( size_t i=0; i<pts1.size(); i++ )
{
g2o::EdgeProjectXYZ2UV* edge = new g2o::EdgeProjectXYZ2UV();
edge->setVertex( 0, dynamic_cast<g2o::VertexSBAPointXYZ*> (optimizer.vertex(i+2)) );
edge->setVertex( 1, dynamic_cast<g2o::VertexSE3Expmap*> (optimizer.vertex(0)) );
edge->setMeasurement( Eigen::Vector2d(pts1[i].x, pts1[i].y ) );
edge->setInformation( Eigen::Matrix2d::Identity() );
edge->setParameterId(0, 0);
// 核函数
edge->setRobustKernel( new g2o::RobustKernelHuber() );
optimizer.addEdge( edge );
edges.push_back(edge);
}
// 第二帧
for ( size_t i=0; i<pts2.size(); i++ )
{
g2o::EdgeProjectXYZ2UV* edge = new g2o::EdgeProjectXYZ2UV();
edge->setVertex( 0, dynamic_cast<g2o::VertexSBAPointXYZ*> (optimizer.vertex(i+2)) );
edge->setVertex( 1, dynamic_cast<g2o::VertexSE3Expmap*> (optimizer.vertex(1)) );
edge->setMeasurement( Eigen::Vector2d(pts2[i].x, pts2[i].y ) );
edge->setInformation( Eigen::Matrix2d::Identity() );
edge->setParameterId(0,0);
// 核函数
edge->setRobustKernel( new g2o::RobustKernelHuber() );
optimizer.addEdge( edge );
edges.push_back(edge);
}
cout<<"开始优化"<<endl;
optimizer.setVerbose(true);
optimizer.initializeOptimization();
optimizer.optimize(10);
cout<<"优化完毕"<<endl;
//我们比较关心两帧之间的变换矩阵
g2o::VertexSE3Expmap* v = dynamic_cast<g2o::VertexSE3Expmap*>( optimizer.vertex(1) );
Eigen::Isometry3d pose = v->estimate();
cout<<"Pose="<<endl<<pose.matrix()<<endl;
// 以及所有特征点的位置
for ( size_t i=0; i<pts1.size(); i++ )
{
g2o::VertexSBAPointXYZ* v = dynamic_cast<g2o::VertexSBAPointXYZ*> (optimizer.vertex(i+2));
cout<<"vertex id "<<i+2<<", pos = ";
Eigen::Vector3d pos = v->estimate();
cout<<pos(0)<<","<<pos(1)<<","<<pos(2)<<endl;
}
// 估计inlier的个数
int inliers = 0;
for ( auto e:edges )
{
e->computeError();
// chi2 就是 error*\Omega*error, 如果这个数很大，说明此边的值与其他边很不相符
if ( e->chi2() > 1 )
{
cout<<"error = "<<e->chi2()<<endl;
}
else
{
inliers++;
}
}
cout<<"inliers in total points: "<<inliers<<"/"<<pts1.size()+pts2.size()<<endl;
optimizer.save("ba.g2o");
return 0;
}
void GraphicEnd::lostRecovery()
{
//以present作为新的关键帧
cout<<BOLDYELLOW<<"Lost Recovery..."<<RESET<<endl;
//把present中的数据存储到current中
_currKF.id ++;
_currKF.planes = _present.planes;
_currKF.frame_index = _index;
_lastRGB = _currRGB.clone();
_kf_pos = _robot;
//waitKey(0);
_keyframes.push_back( _currKF );
//将current关键帧存储至全局优化器
SparseOptimizer& opt = _pSLAMEnd->globalOptimizer;
//顶点
VertexSE3* v = new VertexSE3();
v->setId( _currKF.id );
if (_use_odometry)
v->setEstimate( _odo_this );
else
v->setEstimate( Eigen::Isometry3d::Identity() );
opt.addVertex( v );
//由于当前位置不知道,所以不添加与上一帧相关的边
if (_use_odometry)
{
Eigen::Isometry3d To = _odo_last.inverse()*_odo_this;
EdgeSE3* edge = new EdgeSE3();
edge->vertices()[0] = opt.vertex( _currKF.id - 1 );
edge->vertices()[1] = opt.vertex( _currKF.id );
Eigen::Matrix<double, 6,6> information = Eigen::Matrix<double, 6, 6>::Identity();
information(0, 0) = information(2,2) = information(1, 1) = information(3,3) = information(4,4) = information(5,5) = 1/(_error_odometry*_error_odometry);
edge->setInformation( information );
edge->setMeasurement( To );
opt.addEdge( edge );
_odo_last = _odo_this;
_lost = 0;
return;
}
//check loop closure
for (int i=0; i<_keyframes.size() - 1; i++)
{
vector<PLANE>& p1 = _keyframes[ i ].planes;
Eigen::Isometry3d T = multiPnP( p1, _currKF.planes ).T;
if (T.matrix() == Eigen::Isometry3d::Identity().matrix()) //匹配不上
continue;
T = T.inverse();
//若匹配上，则在两个帧之间加一条边
EdgeSE3* edge = new EdgeSE3();
edge->vertices() [0] = opt.vertex( _keyframes[i].id );
edge->vertices() [1] = opt.vertex( _currKF.id );
Eigen::Matrix<double, 6,6> information = Eigen::Matrix<double, 6, 6>::Identity();
information(0, 0) = information(1,1) = information(2,2) = 100;
information(3,3) = information(4,4) = information(5,5) = 100;
edge->setInformation( information );
edge->setMeasurement( T );
edge->setRobustKernel( _pSLAMEnd->_robustKernel );
opt.addEdge( edge );
}
}
//回环检测：在过去的帧中随机取_loopclosure_frames那么多帧进行两两比较
void GraphicEnd::loopClosure()
{
if (_keyframes.size() <= 3 ) //小于3时，回环没有意义
return;
cout<<"Checking loop closure."<<endl;
waitKey(10);
vector<int> checked;
SparseOptimizer& opt = _pSLAMEnd->globalOptimizer;
//相邻帧
for (int i=-3; i>-5; i--)
{
int n = _keyframes.size() + i;
if (n>=0)
{
vector<PLANE>& p1 = _keyframes[n].planes;
Eigen::Isometry3d T = multiPnP( p1, _currKF.planes ).T;
if (T.matrix() == Eigen::Isometry3d::Identity().matrix()) //匹配不上
continue;
T = T.inverse();
//若匹配上，则在两个帧之间加一条边
EdgeSE3* edge = new EdgeSE3();
edge->vertices() [0] = opt.vertex( _keyframes[n].id );
edge->vertices() [1] = opt.vertex( _currKF.id );
Eigen::Matrix<double, 6,6> information = Eigen::Matrix<double, 6, 6>::Identity();
information(0, 0) = information(2,2) = 100;
information(1,1) = 100;
information(3,3) = information(4,4) = information(5,5) = 100;
edge->setInformation( information );
edge->setMeasurement( T );
edge->setRobustKernel( _pSLAMEnd->_robustKernel );
opt.addEdge( edge );
}
else
break;
}
//搜索种子帧
cout<<"checking seeds, seed.size()"<<_seed.size()<<endl;
vector<int> newseed;
for (size_t i=0; i<_seed.size(); i++)
{
vector<PLANE>& p1 = _keyframes[_seed[i]].planes;
Eigen::Isometry3d T = multiPnP( p1, _currKF.planes ).T;
if (T.matrix() == Eigen::Isometry3d::Identity().matrix()) //匹配不上
continue;
T = T.inverse();
//若匹配上，则在两个帧之间加一条边
checked.push_back( _seed[i] );
newseed.push_back( _seed[i] );
EdgeSE3* edge = new EdgeSE3();
edge->vertices() [0] = opt.vertex( _keyframes[_seed[i]].id );
edge->vertices() [1] = opt.vertex( _currKF.id );
Eigen::Matrix<double, 6,6> information = Eigen::Matrix<double, 6, 6>::Identity();
information(0, 0) = information(2,2) = 100;
information(1,1) = 100;
information(3,3) = information(4,4) = information(5,5) = 100;
edge->setInformation( information );
edge->setMeasurement( T );
edge->setRobustKernel( _pSLAMEnd->_robustKernel );
opt.addEdge( edge );
}
//随机搜索
cout<<"checking random frames"<<endl;
for (int i=0; i<_loopclosure_frames; i++)
{
int frame = rand() % (_keyframes.size() -3 ); //随机在过去的帧中取一帧
if ( find(checked.begin(), checked.end(), frame) != checked.end() ) //之前已检查过
continue;
checked.push_back( frame );
vector<PLANE>& p1 = _keyframes[frame].planes;
RESULT_OF_MULTIPNP result = multiPnP( p1, _currKF.planes, true, _keyframes[frame].frame_index, 20 );
Eigen::Isometry3d T = result.T;
if (T.matrix() == Eigen::Isometry3d::Identity().matrix()) //匹配不上
continue;
T = T.inverse();
displayLC( _keyframes[frame].frame_index, _currKF.frame_index, result.norm);
newseed.push_back( frame );
//若匹配上，则在两个帧之间加一条边
cout<<BOLDBLUE<<"find a loop closure between kf "<<_currKF.id<<" and kf "<<frame<<RESET<<endl;
EdgeSE3* edge = new EdgeSE3();
edge->vertices() [0] = opt.vertex( _keyframes[frame].id );
edge->vertices() [1] = opt.vertex( _currKF.id );
Eigen::Matrix<double, 6,6> information = Eigen::Matrix<double, 6, 6>::Identity();
information(0, 0) = information(2,2) = 100;
information(1,1) = 100;
information(3,3) = information(4,4) = information(5,5) = 100;
edge->setInformation( information );
edge->setMeasurement( T );
edge->setRobustKernel( _pSLAMEnd->_robustKernel );
opt.addEdge( edge );
}
waitKey(10);
_seed = newseed;
}
bool G2oSlamInterface::addEdge(const std::string& tag, int id, int dimension, int v1Id, int v2Id, const std::vector<double>& measurement, const std::vector<double>& information)
{
(void) tag;
(void) id;
size_t oldEdgesSize = _optimizer->edges().size();
if (dimension == 3) {
SE2 transf(measurement[0], measurement[1], measurement[2]);
Eigen::Matrix3d infMat;
int idx = 0;
for (int r = 0; r < 3; ++r)
for (int c = r; c < 3; ++c, ++idx) {
assert(idx < (int)information.size());
infMat(r,c) = infMat(c,r) = information[idx];
}
//cerr << PVAR(infMat) << endl;
int doInit = 0;
SparseOptimizer::Vertex* v1 = _optimizer->vertex(v1Id);
SparseOptimizer::Vertex* v2 = _optimizer->vertex(v2Id);
if (! v1) {
OptimizableGraph::Vertex* v = v1 = addVertex(dimension, v1Id);
_verticesAdded.insert(v);
doInit = 1;
++_nodesAdded;
}
if (! v2) {
OptimizableGraph::Vertex* v = v2 = addVertex(dimension, v2Id);
_verticesAdded.insert(v);
doInit = 2;
++_nodesAdded;
}
if (_optimizer->edges().size() == 0) {
cerr << "FIRST EDGE ";
if (v1->id() < v2->id()) {
cerr << "fixing " << v1->id() << endl;
v1->setFixed(true);
}
else {
cerr << "fixing " << v2->id() << endl;
v2->setFixed(true);
}
}
OnlineEdgeSE2* e = new OnlineEdgeSE2;
e->vertices()[0] = v1;
e->vertices()[1] = v2;
e->setMeasurement(transf);
e->setInformation(infMat);
_optimizer->addEdge(e);
_edgesAdded.insert(e);
if (doInit) {
OptimizableGraph::Vertex* from = static_cast<OptimizableGraph::Vertex*>(e->vertices()[0]);
OptimizableGraph::Vertex* to = static_cast<OptimizableGraph::Vertex*>(e->vertices()[1]);
switch (doInit){
case 1: // initialize v1 from v2
{
HyperGraph::VertexSet toSet;
toSet.insert(to);
if (e->initialEstimatePossible(toSet, from) > 0.) {
e->initialEstimate(toSet, from);
}
break;
}
case 2:
{
HyperGraph::VertexSet fromSet;
fromSet.insert(from);
if (e->initialEstimatePossible(fromSet, to) > 0.) {
e->initialEstimate(fromSet, to);
}
break;
}
default: cerr << "doInit wrong value\n";
}
}
}
else if (dimension == 6) {
Eigen::Isometry3d transf;
Matrix<double, 6, 6> infMat;
if (measurement.size() == 7) { // measurement is a Quaternion
Vector7d meas;
for (int i=0; i<7; ++i)
meas(i) = measurement[i];
// normalize the quaternion to recover numerical precision lost by storing as human readable text
Vector4d::MapType(meas.data()+3).normalize();
transf = internal::fromVectorQT(meas);
for (int i = 0, idx = 0; i < infMat.rows(); ++i)
for (int j = i; j < infMat.cols(); ++j){
infMat(i,j) = information[idx++];
if (i != j)
infMat(j,i)=infMat(i,j);
}
} else { // measurement consists of Euler angles
Vector6d aux;
aux << measurement[0], measurement[1], measurement[2],measurement[3], measurement[4], measurement[5];
transf = internal::fromVectorET(aux);
Matrix<double, 6, 6> infMatEuler;
int idx = 0;
for (int r = 0; r < 6; ++r)
for (int c = r; c < 6; ++c, ++idx) {
assert(idx < (int)information.size());
infMatEuler(r,c) = infMatEuler(c,r) = information[idx];
}
// convert information matrix to our internal representation
Matrix<double, 6, 6> J;
SE3Quat transfAsSe3(transf.matrix().topLeftCorner<3,3>(), transf.translation());
jac_quat3_euler3(J, transfAsSe3);
infMat.noalias() = J.transpose() * infMatEuler * J;
//cerr << PVAR(transf.matrix()) << endl;
//cerr << PVAR(infMat) << endl;
}
int doInit = 0;
SparseOptimizer::Vertex* v1 = _optimizer->vertex(v1Id);
SparseOptimizer::Vertex* v2 = _optimizer->vertex(v2Id);
if (! v1) {
OptimizableGraph::Vertex* v = v1 = addVertex(dimension, v1Id);
_verticesAdded.insert(v);
doInit = 1;
++_nodesAdded;
}
if (! v2) {
OptimizableGraph::Vertex* v = v2 = addVertex(dimension, v2Id);
_verticesAdded.insert(v);
doInit = 2;
++_nodesAdded;
}
if (_optimizer->edges().size() == 0) {
cerr << "FIRST EDGE ";
if (v1->id() < v2->id()) {
cerr << "fixing " << v1->id() << endl;
v1->setFixed(true);
}
else {
cerr << "fixing " << v2->id() << endl;
v2->setFixed(true);
}
}
OnlineEdgeSE3* e = new OnlineEdgeSE3;
e->vertices()[0] = v1;
e->vertices()[1] = v2;
e->setMeasurement(transf);
e->setInformation(infMat);
_optimizer->addEdge(e);
_edgesAdded.insert(e);
if (doInit) {
OptimizableGraph::Vertex* from = static_cast<OptimizableGraph::Vertex*>(e->vertices()[0]);
OptimizableGraph::Vertex* to = static_cast<OptimizableGraph::Vertex*>(e->vertices()[1]);
switch (doInit){
case 1: // initialize v1 from v2
{
HyperGraph::VertexSet toSet;
toSet.insert(to);
if (e->initialEstimatePossible(toSet, from) > 0.) {
e->initialEstimate(toSet, from);
}
break;
}
case 2:
{
HyperGraph::VertexSet fromSet;
fromSet.insert(from);
if (e->initialEstimatePossible(fromSet, to) > 0.) {
e->initialEstimate(fromSet, to);
}
break;
}
default: cerr << "doInit wrong value\n";
}
}
}
else {
cerr << __PRETTY_FUNCTION__ << " not implemented for this dimension" << endl;
return false;
}
if (oldEdgesSize == 0) {
_optimizer->jacobianWorkspace().allocate();
}
return true;
}
int GraphicEnd::run()
{
//清空present并读取新的数据
cout<<"********************"<<endl;
_present.planes.clear();
readimage();
//处理present
_present.planes = extractPlanesAndGenerateImage( _currCloud, _currRGB, _currDep );
//_present.planes = extractPlanes( _currCloud );
//generateImageOnPlane( _currRGB, _present.planes, _currDep );
for ( size_t i=0; i<_present.planes.size(); i++ )
{
_present.planes[i].kp = extractKeypoints( _present.planes[i].image );
_present.planes[i].desp = extractDescriptor( _currRGB, _present.planes[i].kp );
compute3dPosition( _present.planes[i], _currDep);
}
// 求解present到current的变换矩阵
RESULT_OF_MULTIPNP result = multiPnP( _currKF.planes, _present.planes );
Eigen::Isometry3d T = result.T;
T = T.inverse(); //好像是反着的
// 如果平移和旋转超过一个阈值，则定义新的关键帧
if ( T.matrix() == Eigen::Isometry3d::Identity().matrix() )
{
//未匹配上
cout<<BOLDRED"This frame lost"<<RESET<<endl;
_lost++;
}
else if (result.norm > _max_pos_change)
{
//生成一个新的关键帧
_robot = T * _kf_pos;
generateKeyFrame(T);
if (_loop_closure_detection == true)
loopClosure();
_lost = 0;
}
else
{
//小变化，更新robot位置
_robot = T * _kf_pos;
_lost = 0;
}
if (_lost > _lost_frames)
{
cerr<<"the robot lost. Perform lost recovery."<<endl;
lostRecovery();
}
cout<<RED<<"key frame size = "<<_keyframes.size()<<RESET<<endl;
_index ++;
if (_use_odometry)
{
_odo_this = _odometry[ _index-1 ];
}
return 1;
}
void test_relative_values(bool spatial_targets, bool spatial_followers)
{
const double tolerance = 1e-8;
// These frames will form a chain
SimpleFrame A(Frame::World(), "A");
SimpleFrame B(&A, "B");
SimpleFrame C(&B, "C");
SimpleFrame D(&C, "D");
std::vector<SimpleFrame*> targets;
targets.push_back(&A);
targets.push_back(&B);
targets.push_back(&C);
targets.push_back(&D);
// R will be an arbitrary reference frame
SimpleFrame R(Frame::World(), "R");
targets.push_back(&R);
// Each of these frames will attempt to track one of the frames in the chain
// with respect to the frame R.
SimpleFrame AR(&R, "AR");
SimpleFrame BR(&R, "BR");
SimpleFrame CR(&R, "CR");
SimpleFrame DR(&R, "DR");
SimpleFrame RR(&R, "RR");
std::vector<SimpleFrame*> followers;
followers.push_back(&AR);
followers.push_back(&BR);
followers.push_back(&CR);
followers.push_back(&DR);
followers.push_back(&RR);
assert( targets.size() == followers.size() );
randomize_target_values(targets, spatial_targets);
set_relative_values(targets, followers, spatial_followers);
check_world_values(targets, followers, tolerance);
// Check every combination of relative values
for(std::size_t i=0; i<targets.size(); ++i)
{
Frame* T = targets[i];
for(std::size_t j=0; j<followers.size(); ++j)
{
Frame* F = followers[j];
check_values(targets, followers, T, F, tolerance);
check_values(targets, followers, F, T, tolerance);
check_offset_computations(targets, followers, T, F, tolerance);
}
}
// Test SimpleFrame::setTransform()
for(std::size_t i=0; i<followers.size(); ++i)
{
for(std::size_t j=0; j<followers.size(); ++j)
{
SimpleFrame* F = followers[i];
SimpleFrame* T = followers[j];
Eigen::Isometry3d tf;
randomize_transform(tf, 1, 2*M_PI);
T->setTransform(tf, F);
if(i != j)
EXPECT_TRUE( equals(T->getTransform(F).matrix(), tf.matrix(), 1e-10));
}
}
}
TEST(FRAMES, FORWARD_KINEMATICS_CHAIN)
{
std::vector<SimpleFrame*> frames;
double tolerance = 1e-6;
SimpleFrame A(Frame::World(), "A");
frames.push_back(&A);
SimpleFrame B(&A, "B");
frames.push_back(&B);
SimpleFrame C(&B, "C");
frames.push_back(&C);
SimpleFrame D(&C, "D");
frames.push_back(&D);
// -- Test Position --------------------------------------------------------
EXPECT_TRUE( equals(D.getTransform().matrix(),
Eigen::Isometry3d::Identity().matrix(),
tolerance));
Eigen::aligned_vector<Eigen::Isometry3d> tfs;
tfs.resize(frames.size(), Eigen::Isometry3d::Identity());
randomize_transforms(tfs);
for(std::size_t i=0; i<frames.size(); ++i)
{
SimpleFrame* F = frames[i];
F->setRelativeTransform(tfs[i]);
}
for(std::size_t i=0; i<frames.size(); ++i)
{
Frame* F = frames[i];
Eigen::Isometry3d expectation(Eigen::Isometry3d::Identity());
for(std::size_t j=0; j<=i; ++j)
{
expectation = expectation * tfs[j];
}
Eigen::Isometry3d actual = F->getTransform();
EXPECT_TRUE( equals(actual.matrix(), expectation.matrix(), tolerance));
}
randomize_transforms(tfs);
for(std::size_t i=0; i<frames.size(); ++i)
{
SimpleFrame* F = frames[i];
F->setRelativeTransform(tfs[i]);
}
Eigen::Isometry3d expectation(Eigen::Isometry3d::Identity());
for(std::size_t j=0; j<frames.size(); ++j)
expectation = expectation * tfs[j];
EXPECT_TRUE( equals(frames.back()->getTransform().matrix(),
expectation.matrix(),
tolerance) );
// -- Test Velocity --------------------------------------------------------
// Basic forward spatial velocity propagation
{ // The brackets are to allow reusing variable names
Eigen::aligned_vector<Eigen::Vector6d> v_rels(frames.size());
Eigen::aligned_vector<Eigen::Vector6d> v_total(frames.size());
for(std::size_t i=0; i<frames.size(); ++i)
{
v_rels[i] = random_vec<6>();
SimpleFrame* F = frames[i];
F->setRelativeSpatialVelocity(v_rels[i]);
if(i>0)
compute_spatial_velocity(v_total[i-1], v_rels[i],
F->getRelativeTransform(), v_total[i]);
else
compute_spatial_velocity(Eigen::Vector6d::Zero(), v_rels[i],
F->getRelativeTransform(), v_total[i]);
}
for(std::size_t i=0; i<frames.size(); ++i)
{
SimpleFrame* F = frames[i];
Eigen::Vector6d v_actual = F->getSpatialVelocity();
EXPECT_TRUE( equals(v_total[i], v_actual) );
}
}
// Testing conversion beteween spatial and classical velocities
{
std::vector<Eigen::Vector3d> v_rels(frames.size());
std::vector<Eigen::Vector3d> w_rels(frames.size());
std::vector<Eigen::Vector3d> v_total(frames.size());
std::vector<Eigen::Vector3d> w_total(frames.size());
for(std::size_t i=0; i<frames.size(); ++i)
{
v_rels[i] = random_vec<3>();
w_rels[i] = random_vec<3>();
SimpleFrame* F = frames[i];
F->setClassicDerivatives(v_rels[i], w_rels[i]);
Eigen::Vector3d offset = F->getRelativeTransform().translation();
Eigen::Isometry3d tf = i>0? frames[i-1]->getTransform() :
Eigen::Isometry3d::Identity();
if(i>0)
compute_velocity(v_total[i-1], w_total[i-1], v_rels[i], w_rels[i],
offset, tf, v_total[i], w_total[i]);
else
compute_velocity(Eigen::Vector3d::Zero(), Eigen::Vector3d::Zero(),
v_rels[i], w_rels[i],
offset, tf, v_total[i], w_total[i]);
}
for(std::size_t i=0; i<frames.size(); ++i)
{
SimpleFrame* F = frames[i];
Eigen::Vector3d v_actual = F->getLinearVelocity();
Eigen::Vector3d w_actual = F->getAngularVelocity();
EXPECT_TRUE( equals(v_total[i], v_actual, tolerance) );
EXPECT_TRUE( equals(w_total[i], w_actual, tolerance) );
}
}
// -- Acceleration ---------------------------------------------------------
// Basic forward spatial acceleration propagation
{
Eigen::aligned_vector<Eigen::Vector6d> v_rels(frames.size());
Eigen::aligned_vector<Eigen::Vector6d> a_rels(frames.size());
Eigen::aligned_vector<Eigen::Vector6d> v_total(frames.size());
Eigen::aligned_vector<Eigen::Vector6d> a_total(frames.size());
for(std::size_t i=0; i<frames.size(); ++i)
{
v_rels[i] = random_vec<6>();
a_rels[i] = random_vec<6>();
SimpleFrame* F = frames[i];
F->setRelativeSpatialVelocity(v_rels[i]);
F->setRelativeSpatialAcceleration(a_rels[i]);
Eigen::Isometry3d tf = F->getRelativeTransform();
if(i>0)
{
compute_spatial_velocity(v_total[i-1], v_rels[i], tf, v_total[i]);
compute_spatial_acceleration(a_total[i-1], a_rels[i], v_total[i],
v_rels[i], tf, a_total[i]);
}
else
{
compute_spatial_velocity(Eigen::Vector6d::Zero(), v_rels[i],
tf, v_total[i]);
compute_spatial_acceleration(Eigen::Vector6d::Zero(), a_rels[i],
v_total[i], v_rels[i], tf, a_total[i]);
}
}
for(std::size_t i=0; i<frames.size(); ++i)
{
SimpleFrame* F = frames[i];
Eigen::Vector6d a_actual = F->getSpatialAcceleration();
EXPECT_TRUE( equals(a_total[i], a_actual) );
}
// Test relative computations
for(std::size_t i=0; i<frames.size(); ++i)
{
Frame* F = frames[i];
Frame* P = F->getParentFrame();
Eigen::Vector6d v_rel = F->getSpatialVelocity(P, F);
Eigen::Vector6d a_rel = F->getSpatialAcceleration(P, F);
EXPECT_TRUE( equals(v_rels[i], v_rel, tolerance) );
EXPECT_TRUE( equals(a_rels[i], a_rel, tolerance) );
}
// Test offset computations
for(std::size_t i=0; i<frames.size(); ++i)
{
Eigen::Vector3d offset = random_vec<3>();
Frame* F = frames[i];
Eigen::Vector3d v_actual = F->getLinearVelocity(offset);
Eigen::Vector3d w_actual = F->getAngularVelocity();
Eigen::Vector3d v_expect, w_expect;
compute_velocity(F->getLinearVelocity(), F->getAngularVelocity(),
Eigen::Vector3d::Zero(), Eigen::Vector3d::Zero(),
offset, F->getWorldTransform(), v_expect, w_expect);
EXPECT_TRUE( equals( v_expect, v_actual) );
EXPECT_TRUE( equals( w_expect, w_actual) );
Eigen::Vector3d a_actual = F->getLinearAcceleration(offset);
Eigen::Vector3d alpha_actual = F->getAngularAcceleration();
Eigen::Vector3d a_expect, alpha_expect;
compute_acceleration(F->getLinearAcceleration(),
F->getAngularAcceleration(), F->getAngularVelocity(),
Eigen::Vector3d::Zero(), Eigen::Vector3d::Zero(),
Eigen::Vector3d::Zero(), Eigen::Vector3d::Zero(),
offset, F->getWorldTransform(),
a_expect, alpha_expect);
EXPECT_TRUE( equals( a_expect, a_actual) );
EXPECT_TRUE( equals( alpha_expect, alpha_actual) );
}
}
// Testing conversion between spatial and classical accelerations
{
std::vector<Eigen::Vector3d> v_rels(frames.size());
std::vector<Eigen::Vector3d> w_rels(frames.size());
std::vector<Eigen::Vector3d> a_rels(frames.size());
std::vector<Eigen::Vector3d> alpha_rels(frames.size());
std::vector<Eigen::Vector3d> v_total(frames.size());
std::vector<Eigen::Vector3d> w_total(frames.size());
std::vector<Eigen::Vector3d> a_total(frames.size());
std::vector<Eigen::Vector3d> alpha_total(frames.size());
for(std::size_t i=0; i<frames.size(); ++i)
{
v_rels[i] = random_vec<3>();
w_rels[i] = random_vec<3>();
a_rels[i] = random_vec<3>();
alpha_rels[i] = random_vec<3>();
SimpleFrame* F = frames[i];
Eigen::Isometry3d rel_tf;
randomize_transform(rel_tf);
F->setRelativeTransform(rel_tf);
F->setClassicDerivatives(v_rels[i], w_rels[i], a_rels[i], alpha_rels[i]);
Eigen::Vector3d offset = F->getRelativeTransform().translation();
Eigen::Isometry3d tf = i>0? frames[i-1]->getTransform() :
Eigen::Isometry3d::Identity();
if(i>0)
{
compute_velocity(v_total[i-1], w_total[i-1], v_rels[i], w_rels[i],
offset, tf, v_total[i], w_total[i]);
compute_acceleration(a_total[i-1], alpha_total[i-1], w_total[i-1],
a_rels[i], alpha_rels[i], v_rels[i], w_rels[i], offset, tf,
a_total[i], alpha_total[i]);
}
else
{
compute_velocity(Eigen::Vector3d::Zero(), Eigen::Vector3d::Zero(),
v_rels[i], w_rels[i], offset, tf,
v_total[i], w_total[i]);
compute_acceleration(Eigen::Vector3d::Zero(), Eigen::Vector3d::Zero(),
Eigen::Vector3d::Zero(), a_rels[i], alpha_rels[i],
v_rels[i], w_rels[i], offset, tf,
a_total[i], alpha_total[i]);
}
}
for(std::size_t i=0; i<frames.size(); ++i)
{
SimpleFrame* F = frames[i];
Eigen::Vector3d v_actual = F->getLinearVelocity();
Eigen::Vector3d w_actual = F->getAngularVelocity();
Eigen::Vector3d a_actual = F->getLinearAcceleration();
Eigen::Vector3d alpha_actual = F->getAngularAcceleration();
EXPECT_TRUE( equals(v_total[i], v_actual, tolerance) );
EXPECT_TRUE( equals(w_total[i], w_actual, tolerance) );
EXPECT_TRUE( equals(a_total[i], a_actual, tolerance) );
EXPECT_TRUE( equals(alpha_total[i], alpha_actual, tolerance) );
}
// Test relative computations
for(std::size_t i=0; i<frames.size(); ++i)
{
SimpleFrame* F = frames[i];
Frame* P = F->getParentFrame();
Eigen::Vector3d v_rel = F->getLinearVelocity(P, P);
Eigen::Vector3d w_rel = F->getAngularVelocity(P, P);
Eigen::Vector3d a_rel = F->getLinearAcceleration(P, P);
Eigen::Vector3d alpha_rel = F->getAngularAcceleration(P, P);
EXPECT_TRUE( equals(v_rels[i], v_rel, tolerance) );
EXPECT_TRUE( equals(w_rels[i], w_rel, tolerance) );
EXPECT_TRUE( equals(a_rels[i], a_rel, tolerance) );
EXPECT_TRUE( equals(alpha_rels[i], alpha_rel, tolerance) );
}
}
}
void ViewerState::optimizeSelected(){
DrawableFrame* current = drawableFrameVector.back();
DrawableFrame* reference = drawableFrameVector[drawableFrameVector.size()-2];
cerr << "optimizing" << endl;
cerr << "current=" << current->frame() << endl;
cerr << "reference= " << reference->frame() << endl;
// cerr computing initial guess based on the frame positions, just for convenience
Eigen::Isometry3d delta = reference->_vertex->estimate().inverse()*current->_vertex->estimate();
for(int c=0; c<4; c++)
for(int r=0; r<3; r++)
initialGuess.matrix()(r,c) = delta.matrix()(r,c);
Eigen::Isometry3f odometryMean;
Matrix6f odometryInfo;
bool hasOdometry = extractRelativePrior(odometryMean, odometryInfo, reference, current);
if (hasOdometry)
initialGuess=odometryMean;
Eigen::Isometry3f imuMean;
Matrix6f imuInfo;
bool hasImu = extractAbsolutePrior(imuMean, imuInfo, current);
initialGuess.matrix().row(3) << 0,0,0,1;
if(!wasInitialGuess) {
aligner->clearPriors();
aligner->setOuterIterations(al_outerIterations);
aligner->setReferenceFrame(reference->frame());
aligner->setCurrentFrame(current->frame());
aligner->setInitialGuess(initialGuess);
aligner->setSensorOffset(sensorOffset);
if (hasOdometry)
aligner->addRelativePrior(odometryMean, odometryInfo);
if (hasImu)
aligner->addAbsolutePrior(reference->transformation(), imuMean, imuInfo);
aligner->align();
}
Eigen::Isometry3f localTransformation =aligner->T();
if (aligner->inliers()<1000 || aligner->error()/aligner->inliers()>10){
cerr << "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" << endl;
cerr << "aligner: monster failure: inliers = " << aligner->inliers() << endl;
cerr << "aligner: monster failure: error/inliers = " << aligner->error()/aligner->inliers() << endl;
cerr << "Local transformation: " << t2v(aligner->T()).transpose() << endl;
localTransformation = initialGuess;
sleep(1);
}
cout << "Local transformation: " << t2v(aligner->T()).transpose() << endl;
globalT = reference->transformation()*aligner->T();
// Update cloud drawing position.
current->setTransformation(globalT);
current->setLocalTransformation(aligner->T());
// Show zBuffers.
refScn->clear();
currScn->clear();
QImage refQImage;
QImage currQImage;
DepthImageView div;
div.computeColorMap(300, 2000, 128);
div.convertToQImage(refQImage, aligner->correspondenceFinder()->referenceDepthImage());
div.convertToQImage(currQImage, aligner->correspondenceFinder()->currentDepthImage());
refScn->addPixmap((QPixmap::fromImage(refQImage)).scaled(QSize((int)refQImage.width()/(ng_scale*3), (int)(refQImage.height()/(ng_scale*3)))));
currScn->addPixmap((QPixmap::fromImage(currQImage)).scaled(QSize((int)currQImage.width()/(ng_scale*3), (int)(currQImage.height()/(ng_scale*3)))));
pwnGMW->graphicsView1_2d->show();
pwnGMW->graphicsView2_2d->show();
wasInitialGuess = false;
newCloudAdded = false;
*initialGuessViewer = 0;
*optimizeViewer = 0;
}
void BundleAdjustmentOptimization(const vector<Point3f>& objectPoints,const vector<Eigen::Vector2d>& imagePoints1,const vector<Eigen::Vector2d>& imagePoints2)
{
typedef BlockSolver_6_3 SlamBlockSolver;
typedef LinearSolverEigen< SlamBlockSolver::PoseMatrixType > SlamLinearSolver;
// Eigen::Quaternionf r = Eigen::Quaterniond(T.rotation());
// Eigen::Quaterniond rr(r.w(),r.x(),r.y(),r.z());
// Eigen::Vector3f t = T.translation();
// Eigen::Vector3d tt(t[0],t[1],t[2]);
// g2o::BlockSolver_6_3::LinearSolverType* linearSolver = new g2o::LinearSolverCholmod<g2o::BlockSolver_6_3::PoseMatrixType> ();
// //SlamLinearSolver* linearSolver = new SlamLinearSolver();
// SlamBlockSolver* blockSolver = new SlamBlockSolver(linearSolver);
// OptimizationAlgorithmGaussNewton* solver = new OptimizationAlgorithmGaussNewton(blockSolver);
// //OptimizationAlgorithmLevenberg* solver = new OptimizationAlgorithmLevenberg(blockSolver);
// //Eigen::Vector2d principal_point(325.5,253.5);
// Eigen::Vector2d principal_point(320,240);
// //CameraParameters * cam_params = new CameraParameters (518.5, principal_point,0);
// CameraParameters * cam_params = new CameraParameters (518.5, principal_point,0);
// cam_params->setId(0);
// SparseOptimizer optimizer;
// optimizer.setAlgorithm(solver);
// optimizer.setVerbose(false);
// optimizer.addParameter(cam_params);
// int id=0;
// for(int i =0;i<2;i++)
// {
// VertexSE3Expmap* se3 = new VertexSE3Expmap();
// se3->setId(id);
// if(i == 0)
// {
// se3->setFixed(true);
// se3->setEstimate(SE3Quat());
// }
// else
// { //SE3Quat* pos = new SE3Quat(rr,tt);
// se3->setEstimate(SE3Quat());
// }
// optimizer.addVertex(se3);
// id++;
// }
// cout<<"obejecPoints.size = ";
// cout<<objectPoints.size()<<endl;
// for(int i =0;i<objectPoints.size();i++)
// {
// VertexSBAPointXYZ* v_xyz = new VertexSBAPointXYZ();
// Eigen::Vector3d vec;
// v_xyz->setId(id);
// vec<<objectPoints[i].x,objectPoints[i].y,objectPoints[i].z;
// v_xyz->setEstimate(vec);
// v_xyz->setMarginalized(false);
// optimizer.addVertex(v_xyz);
// id++;
// }
// cout<<imagePoints1.size()<<endl;
// for(int i =0;i<imagePoints1.size();i++)
// {
// EdgeProjectXYZ2UV* e = new EdgeProjectXYZ2UV();
// e->setVertex(0, dynamic_cast<VertexSBAPointXYZ*> (optimizer.vertex(2+i)));
// e->setVertex(1, dynamic_cast<VertexSE3Expmap*> (optimizer.vertex(0)));
// e->setMeasurement(imagePoints1[i]);
// e->information() = Eigen::Matrix2d::Identity();
// e->setParameterId(0,0);
// RobustKernelHuber* rk = new RobustKernelHuber;
// e->setRobustKernel(rk);
// optimizer.addEdge(e);
// }
// cout<<imagePoints2.size()<<endl;
// for(int i =0;i<imagePoints2.size();i++)
// {
// EdgeProjectXYZ2UV* e = new EdgeProjectXYZ2UV();
// e->setVertex(0, dynamic_cast<VertexSBAPointXYZ*> (optimizer.vertex(2+i)));
// e->setVertex(1, dynamic_cast<VertexSE3Expmap*> (optimizer.vertex(1)));
// e->setMeasurement(imagePoints2[i]);
// e->information() = Eigen::Matrix2d::Identity();
// RobustKernelHuber* rk = new RobustKernelHuber;
// e->setParameterId(0,0);
// e->setRobustKernel(rk);
// optimizer.addEdge(e);
// }
g2o::SparseOptimizer optimizer;
// 使用Cholmod中的线性方程求解器
g2o::BlockSolver_6_3::LinearSolverType* linearSolver = new g2o::LinearSolverCholmod<g2o::BlockSolver_6_3::PoseMatrixType> ();
// 6*3 的参数
g2o::BlockSolver_6_3* block_solver = new g2o::BlockSolver_6_3( linearSolver );
// L-M 下降
//g2o::OptimizationAlgorithmLevenberg* algorithm = new g2o::OptimizationAlgorithmLevenberg( block_solver );
OptimizationAlgorithmDogleg* algorithm = new OptimizationAlgorithmDogleg(block_solver);
optimizer.setAlgorithm( algorithm );
optimizer.setVerbose( false );
g2o::CameraParameters* camera = new g2o::CameraParameters( 518.5, Eigen::Vector2d(325,253), 0 );
camera->setId(0);
optimizer.addParameter( camera );
// 添加节点
// 两个位姿节点
for ( int i=0; i<2; i++ )
{
g2o::VertexSE3Expmap* v = new g2o::VertexSE3Expmap();
v->setId(i);
if ( i == 0)
v->setFixed( true ); // 第一个点固定为零
// 预设值为单位Pose，因为我们不知道任何信息
v->setEstimate( g2o::SE3Quat() );
optimizer.addVertex( v );
}
// 很多个特征点的节点
// 以第一帧为准
for ( size_t i=0; i<objectPoints.size(); i++ )
{
g2o::VertexSBAPointXYZ* v = new g2o::VertexSBAPointXYZ();
v->setId( 2 + i );
// 由于深度不知道，只能把深度设置为1了
Eigen::Vector3d vec;
vec<<objectPoints[i].x,objectPoints[i].y,objectPoints[i].z;
v->setMarginalized(true);
v->setEstimate( vec );
optimizer.addVertex( v );
}
// 准备边
// 第一帧
vector<g2o::EdgeProjectXYZ2UV*> edges;
for ( size_t i=0; i<imagePoints1.size(); i++ )
{
g2o::EdgeProjectXYZ2UV* edge = new g2o::EdgeProjectXYZ2UV();
edge->setVertex( 0, dynamic_cast<g2o::VertexSBAPointXYZ*> (optimizer.vertex(i+2)) );
edge->setVertex( 1, dynamic_cast<g2o::VertexSE3Expmap*> (optimizer.vertex(0)) );
edge->setMeasurement( imagePoints1[i] );
edge->setInformation( Eigen::Matrix2d::Identity() );
edge->setParameterId(0, 0);
// 核函数
edge->setRobustKernel( new g2o::RobustKernelHuber() );
optimizer.addEdge( edge );
edges.push_back(edge);
}
// 第二帧
for ( size_t i=0; i<imagePoints2.size(); i++ )
{
g2o::EdgeProjectXYZ2UV* edge = new g2o::EdgeProjectXYZ2UV();
edge->setVertex( 0, dynamic_cast<g2o::VertexSBAPointXYZ*> (optimizer.vertex(i+2)) );
edge->setVertex( 1, dynamic_cast<g2o::VertexSE3Expmap*> (optimizer.vertex(1)) );
edge->setMeasurement( imagePoints2[i] );
edge->setInformation( Eigen::Matrix2d::Identity() );
edge->setParameterId(0,0);
// 核函数
edge->setRobustKernel( new g2o::RobustKernelHuber() );
optimizer.addEdge( edge );
edges.push_back(edge);
}
int inliers=0;
for ( vector<g2o::EdgeProjectXYZ2UV*>::iterator e = edges.begin();e!=edges.end();e++ )
{
(*e)->computeError();
// chi2 就是 error*\Omega*error, 如果这个数很大，说明此边的值与其他边很不相符
if ( (*e)->chi2() > 1 )
{
cout<<"error = "<<(*e)->chi2()<<endl;
}
else
{
inliers++;
}
}
optimizer.setVerbose(true);
optimizer.initializeOptimization();
cout<<"optimizer start"<<endl;
optimizer.optimize(1,true);
cout<<"optimizer end"<<endl;
g2o::VertexSE3Expmap* v = dynamic_cast<g2o::VertexSE3Expmap*>( optimizer.vertex(1) );
Eigen::Isometry3d pose = v->estimate();
cout<<"Pose="<<endl<<pose.matrix()<<endl;
for ( size_t i=0; i<imagePoints1.size(); i++ )
{
g2o::VertexSBAPointXYZ* v = dynamic_cast<g2o::VertexSBAPointXYZ*> (optimizer.vertex(i+2));
cout<<"vertex id "<<i+2<<", pos = ";
Eigen::Vector3d pos = v->estimate();
cout<<pos(0)<<","<<pos(1)<<","<<pos(2)<<endl;
}
}
