void HID_Task(void)
{
ring_buffer * _tx_buffer = &tx_buffer_cdc;
/* Device must be connected and configured for the task to run */
//if (USB_DeviceState != DEVICE_STATE_Configured)
// return;
Endpoint_SelectEndpoint(GENERIC_OUT_EPNUM);
/* Check to see if a packet has been sent from the host */
if (Endpoint_IsOUTReceived())
{
/* Check to see if the packet contains data */
if (Endpoint_IsReadWriteAllowed())
{
/* Create a temporary buffer to hold the read in report from the host */
uint8_t GenericData[GENERIC_REPORT_SIZE];
/* Read Generic Report Data */
Endpoint_Read_Stream_LE(&GenericData, sizeof(GenericData), NULL);
/* Process Generic Report Data */
ProcessGenericHIDReport(GenericData);
dataReceived = 1;
}
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearOUT();
}
Endpoint_SelectEndpoint(GENERIC_IN_EPNUM);
/* Check to see if the host is ready to accept another packet */
//if (Endpoint_IsINReady() && dataReceived!=0)
// && (_tx_buffer->head != _tx_buffer->tail)
if (Endpoint_IsINReady())
{
/* Create a temporary buffer to hold the report to send to the host */
uint8_t GenericData[GENERIC_REPORT_SIZE];
/* Create Generic Report Data */
CreateGenericHIDReport(GenericData);
/* Write Generic Report Data */
Endpoint_Write_Stream_LE(&GenericData, sizeof(GenericData), NULL);
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
dataReceived = 0;
}
}
/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
* the device from the USB host before passing along unhandled control requests to the library for processing
* internally.
*/
void EVENT_USB_Device_ControlRequest(void)
{
/* Handle HID Class specific requests */
switch (USB_ControlRequest.bRequest)
{
case HID_REQ_GetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
{
uint8_t GenericData[GENERIC_REPORT_SIZE];
CreateGenericHIDReport(GenericData);
Endpoint_ClearSETUP();
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(&GenericData, sizeof(GenericData));
Endpoint_ClearOUT();
}
break;
case HID_REQ_SetReport:
if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
{
uint8_t GenericData[GENERIC_REPORT_SIZE];
Endpoint_ClearSETUP();
/* Read the report data from the control endpoint */
Endpoint_Read_Control_Stream_LE(&GenericData, sizeof(GenericData));
Endpoint_ClearIN();
ProcessGenericHIDReport(GenericData);
}
break;
}
}
/** ISR for the general Pipe/Endpoint interrupt vector. This ISR fires when an endpoint's status changes (such as
* a packet has been received) on an endpoint with its corresponding ISR enabling bits set. This is used to send
* HID packets to the host each time the HID interrupt endpoints polling period elapses, as managed by the USB
* controller.
*/
ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)
{
/* Save previously selected endpoint before selecting a new endpoint */
uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
#if defined(INTERRUPT_CONTROL_ENDPOINT)
/* Check if the control endpoint has received a request */
if (Endpoint_HasEndpointInterrupted(ENDPOINT_CONTROLEP))
{
/* Clear the endpoint interrupt */
Endpoint_ClearEndpointInterrupt(ENDPOINT_CONTROLEP);
/* Process the control request */
USB_USBTask();
/* Handshake the endpoint setup interrupt - must be after the call to USB_USBTask() */
USB_INT_Clear(ENDPOINT_INT_SETUP);
}
#endif
#if defined(INTERRUPT_DATA_ENDPOINT)
/* Check if Generic IN endpoint has interrupted */
if (Endpoint_HasEndpointInterrupted(GENERIC_IN_EPNUM))
{
/* Select the Generic IN Report Endpoint */
Endpoint_SelectEndpoint(GENERIC_IN_EPNUM);
/* Clear the endpoint IN interrupt flag */
USB_INT_Clear(ENDPOINT_INT_IN);
/* Clear the Generic IN Report endpoint interrupt and select the endpoint */
Endpoint_ClearEndpointInterrupt(GENERIC_IN_EPNUM);
/* Create a temporary buffer to hold the report to send to the host */
uint8_t GenericData[GENERIC_REPORT_SIZE];
/* Create Generic Report Data */
CreateGenericHIDReport(GenericData);
/* Write Generic Report Data */
Endpoint_Write_Stream_LE(&GenericData, sizeof(GenericData));
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
}
/* Check if Generic OUT endpoint has interrupted */
if (Endpoint_HasEndpointInterrupted(GENERIC_OUT_EPNUM))
{
/* Select the Generic OUT Report Endpoint */
Endpoint_SelectEndpoint(GENERIC_OUT_EPNUM);
/* Clear the endpoint OUT Interrupt flag */
USB_INT_Clear(ENDPOINT_INT_OUT);
/* Clear the Generic OUT Report endpoint interrupt and select the endpoint */
Endpoint_ClearEndpointInterrupt(GENERIC_OUT_EPNUM);
/* Create a temporary buffer to hold the read in report from the host */
uint8_t GenericData[GENERIC_REPORT_SIZE];
/* Read Generic Report Data */
Endpoint_Read_Stream_LE(&GenericData, sizeof(GenericData));
/* Process Generic Report Data */
ProcessGenericHIDReport(GenericData);
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearOUT();
}
#endif
/* Restore previously selected endpoint */
Endpoint_SelectEndpoint(PrevSelectedEndpoint);
}