// If we were supposed to return only a single textline, and there is more
// than one, clean up and leave only the best.
void Textord::CleanupSingleRowResult(PageSegMode pageseg_mode,
PAGE_RES *page_res) {
if (PSM_LINE_FIND_ENABLED(pageseg_mode) || PSM_SPARSE(pageseg_mode))
return; // No cleanup required.
PAGE_RES_IT it(page_res);
// Find the best row, being the greatest mean word conf.
float row_total_conf = 0.0f;
int row_word_count = 0;
ROW_RES *best_row = NULL;
float best_conf = 0.0f;
for (it.restart_page(); it.word() != NULL; it.forward()) {
WERD_RES *word = it.word();
row_total_conf += word->best_choice->certainty();
++row_word_count;
if (it.next_row() != it.row()) {
row_total_conf /= row_word_count;
if (best_row == NULL || best_conf < row_total_conf) {
best_row = it.row();
best_conf = row_total_conf;
}
row_total_conf = 0.0f;
row_word_count = 0;
}
}
// Now eliminate any word not in the best row.
for (it.restart_page(); it.word() != NULL; it.forward()) {
if (it.row() != best_row)
it.DeleteCurrentWord();
}
}
/**
* Segment the page according to the current value of tessedit_pageseg_mode.
* pix_binary_ is used as the source image and should not be NULL.
* On return the blocks list owns all the constructed page layout.
*/
int Tesseract::SegmentPage(const STRING* input_file, BLOCK_LIST* blocks,
Tesseract* osd_tess, OSResults* osr) {
ASSERT_HOST(pix_binary_ != NULL);
int width = pixGetWidth(pix_binary_);
int height = pixGetHeight(pix_binary_);
// Get page segmentation mode.
PageSegMode pageseg_mode = static_cast<PageSegMode>(
static_cast<int>(tessedit_pageseg_mode));
// If a UNLV zone file can be found, use that instead of segmentation.
if (!PSM_COL_FIND_ENABLED(pageseg_mode) &&
input_file != NULL && input_file->length() > 0) {
STRING name = *input_file;
const char* lastdot = strrchr(name.string(), '.');
if (lastdot != NULL)
name[lastdot - name.string()] = '\0';
read_unlv_file(name, width, height, blocks);
}
if (blocks->empty()) {
// No UNLV file present. Work according to the PageSegMode.
// First make a single block covering the whole image.
BLOCK_IT block_it(blocks);
BLOCK* block = new BLOCK("", TRUE, 0, 0, 0, 0, width, height);
block->set_right_to_left(right_to_left());
block_it.add_to_end(block);
} else {
// UNLV file present. Use PSM_SINGLE_BLOCK.
pageseg_mode = PSM_SINGLE_BLOCK;
}
// The diacritic_blobs holds noise blobs that may be diacritics. They
// are separated out on areas of the image that seem noisy and short-circuit
// the layout process, going straight from the initial partition creation
// right through to after word segmentation, where they are added to the
// rej_cblobs list of the most appropriate word. From there classification
// will determine whether they are used.
BLOBNBOX_LIST diacritic_blobs;
int auto_page_seg_ret_val = 0;
TO_BLOCK_LIST to_blocks;
if (PSM_OSD_ENABLED(pageseg_mode) || PSM_BLOCK_FIND_ENABLED(pageseg_mode) ||
PSM_SPARSE(pageseg_mode)) {
auto_page_seg_ret_val = AutoPageSeg(
pageseg_mode, blocks, &to_blocks,
enable_noise_removal ? &diacritic_blobs : NULL, osd_tess, osr);
if (pageseg_mode == PSM_OSD_ONLY)
return auto_page_seg_ret_val;
// To create blobs from the image region bounds uncomment this line:
// to_blocks.clear(); // Uncomment to go back to the old mode.
} else {
deskew_ = FCOORD(1.0f, 0.0f);
reskew_ = FCOORD(1.0f, 0.0f);
if (pageseg_mode == PSM_CIRCLE_WORD) {
Pix* pixcleaned = RemoveEnclosingCircle(pix_binary_);
if (pixcleaned != NULL) {
pixDestroy(&pix_binary_);
pix_binary_ = pixcleaned;
}
}
}
if (auto_page_seg_ret_val < 0) {
return -1;
}
if (blocks->empty()) {
if (textord_debug_tabfind)
tprintf("Empty page\n");
return 0; // AutoPageSeg found an empty page.
}
bool splitting =
pageseg_devanagari_split_strategy != ShiroRekhaSplitter::NO_SPLIT;
bool cjk_mode = textord_use_cjk_fp_model;
textord_.TextordPage(pageseg_mode, reskew_, width, height, pix_binary_,
pix_thresholds_, pix_grey_, splitting || cjk_mode,
&diacritic_blobs, blocks, &to_blocks);
return auto_page_seg_ret_val;
}
// Make the textlines and words inside each block.
void Textord::TextordPage(PageSegMode pageseg_mode, const FCOORD &reskew,
int width, int height, Pix *binary_pix,
Pix *thresholds_pix, Pix *grey_pix,
bool use_box_bottoms,
BLOCK_LIST *blocks, TO_BLOCK_LIST *to_blocks) {
page_tr_.set_x(width);
page_tr_.set_y(height);
if (to_blocks->empty()) {
// AutoPageSeg was not used, so we need to find_components first.
find_components(binary_pix, blocks, to_blocks);
TO_BLOCK_IT it(to_blocks);
for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
TO_BLOCK *to_block = it.data();
// Compute the edge offsets whether or not there is a grey_pix.
// We have by-passed auto page seg, so we have to run it here.
// By page segmentation mode there is no non-text to avoid running on.
to_block->ComputeEdgeOffsets(thresholds_pix, grey_pix);
}
} else if (!PSM_SPARSE(pageseg_mode)) {
// AutoPageSeg does not need to find_components as it did that already.
// Filter_blobs sets up the TO_BLOCKs the same as find_components does.
filter_blobs(page_tr_, to_blocks, true);
}
ASSERT_HOST(!to_blocks->empty());
if (pageseg_mode == PSM_SINGLE_BLOCK_VERT_TEXT) {
const FCOORD anticlockwise90(0.0f, 1.0f);
const FCOORD clockwise90(0.0f, -1.0f);
TO_BLOCK_IT it(to_blocks);
for (it.mark_cycle_pt(); !it.cycled_list(); it.forward()) {
TO_BLOCK *to_block = it.data();
BLOCK *block = to_block->block;
// Create a fake poly_block in block from its bounding box.
block->set_poly_block(new POLY_BLOCK(block->bounding_box(),
PT_VERTICAL_TEXT));
// Rotate the to_block along with its contained block and blobnbox lists.
to_block->rotate(anticlockwise90);
// Set the block's rotation values to obey the convention followed in
// layout analysis for vertical text.
block->set_re_rotation(clockwise90);
block->set_classify_rotation(clockwise90);
}
}
TO_BLOCK_IT to_block_it(to_blocks);
TO_BLOCK *to_block = to_block_it.data();
// Make the rows in the block.
float gradient = 0;
// Do it the old fashioned way.
if (PSM_LINE_FIND_ENABLED(pageseg_mode)) {
gradient = make_rows(page_tr_, to_blocks);
} else if (!PSM_SPARSE(pageseg_mode)) {
// RAW_LINE, SINGLE_LINE, SINGLE_WORD and SINGLE_CHAR all need a single row.
gradient = make_single_row(page_tr_, pageseg_mode != PSM_RAW_LINE,
to_block, to_blocks);
}
BaselineDetect baseline_detector(textord_baseline_debug,
reskew, to_blocks);
baseline_detector.ComputeStraightBaselines(use_box_bottoms);
baseline_detector.ComputeBaselineSplinesAndXheights(page_tr_, true,
textord_heavy_nr,
textord_show_final_rows,
this);
// Now make the words in the lines.
if (PSM_WORD_FIND_ENABLED(pageseg_mode)) {
// SINGLE_LINE uses the old word maker on the single line.
make_words(this, page_tr_, gradient, blocks, to_blocks);
} else {
// SINGLE_WORD and SINGLE_CHAR cram all the blobs into a
// single word, and in SINGLE_CHAR mode, all the outlines
// go in a single blob.
TO_BLOCK *to_block = to_block_it.data();
make_single_word(pageseg_mode == PSM_SINGLE_CHAR,
to_block->get_rows(), to_block->block->row_list());
}
cleanup_blocks(PSM_WORD_FIND_ENABLED(pageseg_mode), blocks);
// Remove empties.
// Compute the margins for each row in the block, to be used later for
// paragraph detection.
BLOCK_IT b_it(blocks);
for (b_it.mark_cycle_pt(); !b_it.cycled_list(); b_it.forward()) {
b_it.data()->compute_row_margins();
}
#ifndef GRAPHICS_DISABLED
close_to_win();
#endif
}
/**
* Segment the page according to the current value of tessedit_pageseg_mode.
* pix_binary_ is used as the source image and should not be NULL.
* On return the blocks list owns all the constructed page layout.
*/
int Tesseract::SegmentPage(const STRING* input_file, BLOCK_LIST* blocks,
Tesseract* osd_tess, OSResults* osr) {
ASSERT_HOST(pix_binary_ != NULL);
int width = pixGetWidth(pix_binary_);
int height = pixGetHeight(pix_binary_);
// Get page segmentation mode.
PageSegMode pageseg_mode = static_cast<PageSegMode>(
static_cast<int>(tessedit_pageseg_mode));
// If a UNLV zone file can be found, use that instead of segmentation.
if (!PSM_COL_FIND_ENABLED(pageseg_mode) &&
input_file != NULL && input_file->length() > 0) {
STRING name = *input_file;
const char* lastdot = strrchr(name.string(), '.');
if (lastdot != NULL)
name[lastdot - name.string()] = '\0';
read_unlv_file(name, width, height, blocks);
}
if (blocks->empty()) {
// No UNLV file present. Work according to the PageSegMode.
// First make a single block covering the whole image.
BLOCK_IT block_it(blocks);
BLOCK* block = new BLOCK("", TRUE, 0, 0, 0, 0, width, height);
block->set_right_to_left(right_to_left());
block_it.add_to_end(block);
} else {
// UNLV file present. Use PSM_SINGLE_BLOCK.
pageseg_mode = PSM_SINGLE_BLOCK;
}
int auto_page_seg_ret_val = 0;
TO_BLOCK_LIST to_blocks;
if (PSM_OSD_ENABLED(pageseg_mode) || PSM_BLOCK_FIND_ENABLED(pageseg_mode) ||
PSM_SPARSE(pageseg_mode)) {
auto_page_seg_ret_val =
AutoPageSeg(pageseg_mode, blocks, &to_blocks, osd_tess, osr);
if (pageseg_mode == PSM_OSD_ONLY)
return auto_page_seg_ret_val;
// To create blobs from the image region bounds uncomment this line:
// to_blocks.clear(); // Uncomment to go back to the old mode.
} else {
deskew_ = FCOORD(1.0f, 0.0f);
reskew_ = FCOORD(1.0f, 0.0f);
if (pageseg_mode == PSM_CIRCLE_WORD) {
Pix* pixcleaned = RemoveEnclosingCircle(pix_binary_);
if (pixcleaned != NULL) {
pixDestroy(&pix_binary_);
pix_binary_ = pixcleaned;
}
}
}
if (auto_page_seg_ret_val < 0) {
return -1;
}
if (blocks->empty()) {
if (textord_debug_tabfind)
tprintf("Empty page\n");
return 0; // AutoPageSeg found an empty page.
}
textord_.TextordPage(pageseg_mode, width, height, pix_binary_,
blocks, &to_blocks);
return auto_page_seg_ret_val;
}
