//------------------------------------------------------------------------------
//
// Function: OEMPowerOff
//
// Description: Called when the system is to transition to it's lowest power mode (off)
//
//
void OEMPowerOff()
{
volatile S3C6400_SYSCON_REG *pSysConReg;
volatile S3C6400_GPIO_REG *pGPIOReg;
volatile S3C6400_VIC_REG *pVIC0Reg;
volatile S3C6400_VIC_REG *pVIC1Reg;
volatile S3C6400_DMAC_REG *pDMAC0Reg;
volatile S3C6400_DMAC_REG *pDMAC1Reg;
int nIndex = 0;
OALMSG(TRUE, (L"[OEM] ++OEMPowerOff()"));
#if 0 // KITL can not support Sleep
// Make sure that KITL is powered off
pArgs = (OAL_KITL_ARGS*)OALArgsQuery(OAL_ARGS_QUERY_KITL);
if ((pArgs->flags & OAL_KITL_FLAGS_ENABLED) != 0)
{
OALKitlPowerOff();
OALMSG(1, (L"OEMPowerOff: KITL Disabled\r\n"));
}
#endif
//-----------------------------
// Disable DVS and Set to Full Speed
//-----------------------------
#ifdef DVS_EN
ChangeDVSLevel(SYS_L0);
#endif
//-----------------------------
// Prepare Specific Actions for Sleep
//-----------------------------
BSPPowerOff();
//------------------------------
// Prepare CPU Entering Sleep Mode
//------------------------------
//----------------
// Map SFR Address
//----------------
pSysConReg = (S3C6400_SYSCON_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_SYSCON, FALSE);
pGPIOReg = (S3C6400_GPIO_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_GPIO, FALSE);
pVIC0Reg = (S3C6400_VIC_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_VIC0, FALSE);
pVIC1Reg = (S3C6400_VIC_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_VIC1, FALSE);
pDMAC0Reg = (S3C6400_DMAC_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_DMA0, FALSE);
pDMAC1Reg = (S3C6400_DMAC_REG *)OALPAtoVA(S3C6400_BASE_REG_PA_DMA1, FALSE);
//------------------
// Save VIC Registers
//------------------
S3C6400_SaveState_VIC((void *)pVIC0Reg, (void *)pVIC1Reg, g_aSleepSave_VIC);
// Disable All Interrupt
pVIC0Reg->VICINTENCLEAR = 0xFFFFFFFF;
pVIC1Reg->VICINTENCLEAR = 0xFFFFFFFF;
pVIC0Reg->VICSOFTINTCLEAR = 0xFFFFFFFF;
pVIC1Reg->VICSOFTINTCLEAR = 0xFFFFFFFF;
//--------------------
// Save DMAC Registers
//--------------------
S3C6400_SaveState_DMACon((void *)pDMAC0Reg, g_aSleepSave_DMACon0);
S3C6400_SaveState_DMACon((void *)pDMAC1Reg, g_aSleepSave_DMACon1);
//------------------
// Save GPIO Register
//------------------
S3C6400_SaveState_GPIO((void *)pGPIOReg, g_aSleepSave_GPIO);
//--------------------
// Save SysCon Register
//--------------------
S3C6400_SaveState_SysCon((void *)pSysConReg, g_aSleepSave_SysCon);
//-------------------------------------------------------
// Unmask Clock Gating and Block Power turn On (SW workaround)
//-------------------------------------------------------
// HCLK_IROM, HCLK_MEM1, HCLK_MEM0, HCLK_MFC Should be Always On for power Mode (Something coupled with BUS operation)
//pSysConReg->HCLK_GATE |= ((1<<25)|(1<<22)|(1<<21)|(1<<0));
pSysConReg->HCLK_GATE = 0xFFFFFFFF;
pSysConReg->PCLK_GATE = 0xFFFFFFFF;
pSysConReg->SCLK_GATE = 0xFFFFFFFF;
// Turn On All Block Block Power
pSysConReg->NORMAL_CFG = 0xFFFFFF00;
// Wait for Block Power Stable
while((pSysConReg->BLK_PWR_STAT & 0x7E) != 0x7E);
//----------------------------
// Wake Up Source Configuration
//----------------------------
S3C6400_WakeUpSource_Configure();
//-------------------------------
// Extra work for Entering Sleep Mode
//-------------------------------
// USB Power Control
pSysConReg->OTHERS &= ~(1<<16); // USB Signal Mask Clear
pGPIOReg->SPCON |= (1<<3); // USB Tranceiver PAD to Suspend
// TODO: SPCONSLP ???
//pGPIOReg->SPCONSLP; // Use Default Valie
//-------------------------------
// GPIO Configuration for Sleep State
//-------------------------------
// TODO: Configure GPIO at Sleep
//BSPConfigGPIOforPowerOff();
// Sleep Mode Pad Configuration
pGPIOReg->SLPEN = 0x2; // Controlled by SLPEN Bit (You Should Clear SLPEN Bit in Wake Up Process...)
//-----------------------
// CPU Entering Sleep Mode
//-----------------------
OALCPUPowerOff(); // Now in Sleep
//----------------------------
// CPU Wake Up from Sleep Mode
//----------------------------
//----------------------------
// Wake Up Source Determine
//----------------------------
S3C6400_WakeUpSource_Detect();
// USB Power Control
pSysConReg->OTHERS |= (1<<16); // TODO: USB Signal Mask Set (Device must handle it...)
pGPIOReg->SPCON &= ~(1<<3); // USB Tranceiver PAD to Normal
// Restore SysCon Register
S3C6400_RestoreState_SysCon((void *)pSysConReg, g_aSleepSave_SysCon);
// Restore GPIO Register
S3C6400_RestoreState_GPIO((void *)pGPIOReg, g_aSleepSave_GPIO);
// Sleep Mode Pad Configuration
pGPIOReg->SLPEN = 0x2; // Clear SLPEN Bit for Pad back to Normal Mode
//-----------------------
// Restore DMAC Registers
//-----------------------
S3C6400_RestoreState_DMACon((void *)pDMAC0Reg, g_aSleepSave_DMACon0);
S3C6400_RestoreState_DMACon((void *)pDMAC1Reg, g_aSleepSave_DMACon1);
// Restore VIC Registers
S3C6400_RestoreState_VIC((void *)pVIC0Reg, (void *)pVIC1Reg, g_aSleepSave_VIC);
//pVIC0Reg->VICADDRESS = 0x0;
//pVIC1Reg->VICADDRESS = 0x0;
// UART Debug Port Initialize
OEMInitDebugSerial();
// Disable Vectored Interrupt Mode on CP15
System_DisableVIC();
// Enable Branch Prediction on CP15
System_EnableBP();
// Enable IRQ Interrupt on CP15
System_EnableIRQ();
// Enable FIQ Interrupt on CP15
System_EnableFIQ();
if (g_oalWakeSource == SYSWAKE_UNKNOWN)
{
OALMSG(TRUE, (L"[OEM:ERR] OEMPowerOff() : SYSWAKE_UNKNOWN , WAKEUP_STAT = 0x%08x", g_LastWakeupStatus));
}
// Initialize System Timer
OEMInitializeSystemTimer(RESCHED_PERIOD, OEM_COUNT_1MS, 0);
#if 0 // KITL can not support Sleep
// Reinitialize KITL
if ((pArgs->flags & OAL_KITL_FLAGS_ENABLED) != 0)
{
OALKitlPowerOn();
}
#endif
//--------------------------------------
// Post Processing Specific Actions for Wake Up
//--------------------------------------
BSPPowerOn();
OALMSG(TRUE, (L"[OEM] --OEMPowerOff()"));
}
//------------------------------------------------------------------------------
//
// Function: OEMPowerOff
//
// Description: Called when the system is to transition to it's lowest power mode (off)
//
//
void OEMPowerOff()
{
volatile S3C6410_SYSCON_REG *pSysConReg;
volatile S3C6410_GPIO_REG *pGPIOReg;
volatile S3C6410_VIC_REG *pVIC0Reg;
volatile S3C6410_VIC_REG *pVIC1Reg;
volatile S3C6410_DMAC_REG *pDMAC0Reg;
volatile S3C6410_DMAC_REG *pDMAC1Reg;
volatile OTG_PHY_REG *pOtgPhyReg;
OAL_KITL_ARGS *pArgs;
BOOL PowerStateOn;
int nIndex = 0;
OALMSG(TRUE, (L"[OEM] ++OEMPowerOff()"));
// Make sure that KITL is powered off
pArgs = (OAL_KITL_ARGS*)OALArgsQuery(OAL_ARGS_QUERY_KITL);
if (pArgs && ((pArgs->flags & OAL_KITL_FLAGS_ENABLED) != 0))
{
PowerStateOn = FALSE;
KITLIoctl (IOCTL_KITL_POWER_CALL, &PowerStateOn, sizeof(PowerStateOn), NULL, 0, NULL);
OALMSG(OAL_VERBOSE, (L"OEMPowerOff: KITL Disabled\r\n"));
}
//-----------------------------
// Prepare Specific Actions for Sleep
//-----------------------------
BSPPowerOff();
//------------------------------
// Prepare CPU Entering Sleep Mode
//------------------------------
//----------------
// Map SFR Address
//----------------
pSysConReg = (S3C6410_SYSCON_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_SYSCON, FALSE);
pGPIOReg = (S3C6410_GPIO_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_GPIO, FALSE);
pVIC0Reg = (S3C6410_VIC_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_VIC0, FALSE);
pVIC1Reg = (S3C6410_VIC_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_VIC1, FALSE);
pDMAC0Reg = (S3C6410_DMAC_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_DMA0, FALSE);
pDMAC1Reg = (S3C6410_DMAC_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_DMA1, FALSE);
pOtgPhyReg = (OTG_PHY_REG *)OALPAtoVA(S3C6410_BASE_REG_PA_USBOTG_PHY, FALSE);
//------------------
// Save VIC Registers
//------------------
S3C6410_SaveState_VIC((void *)pVIC0Reg, (void *)pVIC1Reg, g_aSleepSave_VIC);
// Disable All Interrupt
pVIC0Reg->VICINTENCLEAR = 0xFFFFFFFF;
pVIC1Reg->VICINTENCLEAR = 0xFFFFFFFF;
pVIC0Reg->VICSOFTINTCLEAR = 0xFFFFFFFF;
pVIC1Reg->VICSOFTINTCLEAR = 0xFFFFFFFF;
//--------------------
// Save DMAC Registers
//--------------------
S3C6410_SaveState_DMACon((void *)pDMAC0Reg, g_aSleepSave_DMACon0);
S3C6410_SaveState_DMACon((void *)pDMAC1Reg, g_aSleepSave_DMACon1);
//------------------
// Save GPIO Register
//------------------
S3C6410_SaveState_GPIO((void *)pGPIOReg, g_aSleepSave_GPIO);
//--------------------
// Save SysCon Register
//--------------------
S3C6410_SaveState_SysCon((void *)pSysConReg, g_aSleepSave_SysCon);
//---------------------------------------------------------------------------
// Unmask Clock Gating for All IPsand Block Power turn On for the IPs not going to sleep
//---------------------------------------------------------------------------
// HCLK_IROM, HCLK_MEM1, HCLK_MEM0, HCLK_MFC Should be Always On for power Mode (Something coupled with BUS operation)
//pSysConReg->HCLK_GATE |= ((1<<25)|(1<<22)|(1<<21)|(1<<0));
pSysConReg->HCLK_GATE = 0xFFFFFFFF;
pSysConReg->PCLK_GATE = 0xFFFFFFFF;
pSysConReg->SCLK_GATE = 0xFFFFFFFF;
// Turn On All Block Block Power
pSysConReg->NORMAL_CFG = 0xFFFFFF00;
// Wait for Block Power Stable
while((pSysConReg->BLK_PWR_STAT & 0x7E) != 0x7E);
//----------------------------
// Wake Up Source Configuration
//----------------------------
// S3C6410_WakeUpSource_Configure();
//-------------------------------
// Extra work for Entering Sleep Mode
//-------------------------------
// USB Power Control
pSysConReg->OTHERS &= ~(1<<16); // USB Signal Mask Clear
pGPIOReg->SPCON |= (1<<3); // USB Tranceiver PAD to Suspend
#ifdef _IROM_SDMMC_
// Sleep Mode Pad Configuration. HSJANG 070926. SLPEN must be 0 to change cpcon value for reading OM.
#else
// Sleep Mode Pad Configuration
pGPIOReg->SLPEN = 0x2; // Controlled by SLPEN Bit (You Should Clear SLPEN Bit in Wake Up Process...)
#endif
//-----------------------
// CPU Entering Sleep Mode
//-----------------------
OALCPUPowerOff(); // Now in Sleep
//----------------------------
// CPU Wake Up from Sleep Mode
//----------------------------
// Restore SysCon Register
S3C6410_RestoreState_SysCon((void *)pSysConReg, g_aSleepSave_SysCon);
// Restore GPIO Register
S3C6410_RestoreState_GPIO((void *)pGPIOReg, g_aSleepSave_GPIO);
#ifdef _IROM_SDMMC_
// Sleep Mode Pad Configuration. HSJANG 070926. SLPEN must be 0 to change cpcon value for reading OM.
#else
// Sleep Mode Pad Configuration
pGPIOReg->SLPEN = 0x2; // Clear SLPEN Bit for Pad back to Normal Mode
#endif
//-----------------------
// Restore DMAC Registers
//-----------------------
S3C6410_RestoreState_DMACon((void *)pDMAC0Reg, g_aSleepSave_DMACon0);
S3C6410_RestoreState_DMACon((void *)pDMAC1Reg, g_aSleepSave_DMACon1);
// Restore VIC Registers
S3C6410_RestoreState_VIC((void *)pVIC0Reg, (void *)pVIC1Reg, g_aSleepSave_VIC);
// UART Debug Port Initialize
OEMInitDebugSerial();
// Disable Vectored Interrupt Mode on CP15
System_DisableVIC();
// Enable Branch Prediction on CP15
System_EnableBP();
// Enable IRQ Interrupt on CP15
System_EnableIRQ();
// Enable FIQ Interrupt on CP15
System_EnableFIQ();
// Initialize System Timer
OEMInitializeSystemTimer(RESCHED_PERIOD, OEM_COUNT_1MS, 0);
// USB Power Control
InitializeOTGCLK(); // pll_powerdown, suspend mode
pGPIOReg->SPCON &= ~(1<<3); // USB Tranceiver PAD to Normal
//--------------------------------------
// Post Processing Specific Actions for Wake Up
//--------------------------------------
BSPPowerOn();
// Reinitialize KITL
if (pArgs && ((pArgs->flags & OAL_KITL_FLAGS_ENABLED) != 0))
{
PowerStateOn = TRUE;
KITLIoctl (IOCTL_KITL_POWER_CALL, &PowerStateOn, sizeof(PowerStateOn), NULL, 0, NULL);
}
OALMSG(TRUE, (L"[OEM] --OEMPowerOff()"));
}
