void setup_cpu()
{
// creating values
FILE * fp;
char * line = NULL;
size_t len = 0;
ssize_t read;
int i, j, cpu, usg;
cpu = 0;
// initializing
cpuinfo.ncpus = get_ncpus();
// reserving memory
cpuinfo.cpuloads = (double*)malloc((sizeof(double)*cpuinfo.ncpus));
cpuinfo.last = (unsigned long**)malloc((sizeof(unsigned long*)*cpuinfo.ncpus));
cpuinfo.current = (unsigned long**)malloc((sizeof(unsigned long*)*cpuinfo.ncpus));
for(i = 0;i < cpuinfo.ncpus;i++){
cpuinfo.last[i] = (unsigned long*)malloc((sizeof(unsigned long)*cpuinfo.ncpus));
cpuinfo.current[i] = (unsigned long*)malloc((sizeof(unsigned long)*cpuinfo.ncpus));
}
// open /proc/stat
fp = fopen("/proc/stat", "r");
if (fp == NULL){
log_str("failed to read /proc/stat", LOG_WARNING);
return;
}
// reading line by line
while ((read = getline(&line, &len, fp)) != -1) {
if(line[0] == 'c' && line[3] != ' '){
usg = 0;
// geting values vor user, nice, system, idle
for(i = 4;i < len;i++){
if(line[i] == ' '){
cpuinfo.last[cpu][usg] = atoi(line+i+1);
usg++;
if(usg == 4) break;
}
}
}else if(line[3] == ' ') continue;
else break;
cpu++;
}
if (line) free(line);
fclose(fp);
setup_cpu_name();
}
/*
* fill the cpu_info structure with as much info as we can get.
* code is similar to linux version, but sadly available info is less.
*/
int
rte_eal_cpu_init(void)
{
/* pointer to global configuration */
struct rte_config *config = rte_eal_get_configuration();
unsigned lcore_id;
unsigned count = 0;
const unsigned ncpus = get_ncpus();
/*
* Parse the maximum set of logical cores, detect the subset of running
* ones and enable them by default.
*/
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
/* init cpuset for per lcore config */
CPU_ZERO(&lcore_config[lcore_id].cpuset);
lcore_config[lcore_id].detected = (lcore_id < ncpus);
if (lcore_config[lcore_id].detected == 0) {
config->lcore_role[lcore_id] = ROLE_OFF;
continue;
}
/* By default, lcore 1:1 map to cpu id */
CPU_SET(lcore_id, &lcore_config[lcore_id].cpuset);
/* By default, each detected core is enabled */
config->lcore_role[lcore_id] = ROLE_RTE;
lcore_config[lcore_id].core_id = cpu_core_id(lcore_id);
lcore_config[lcore_id].socket_id = cpu_socket_id(lcore_id);
if (lcore_config[lcore_id].socket_id >= RTE_MAX_NUMA_NODES)
#ifdef RTE_EAL_ALLOW_INV_SOCKET_ID
lcore_config[lcore_id].socket_id = 0;
#else
rte_panic("Socket ID (%u) is greater than "
"RTE_MAX_NUMA_NODES (%d)\n",
lcore_config[lcore_id].socket_id, RTE_MAX_NUMA_NODES);
#endif
RTE_LOG(DEBUG, EAL, "Detected lcore %u\n",
lcore_id);
count++;
}
/* Set the count of enabled logical cores of the EAL configuration */
config->lcore_count = count;
RTE_LOG(DEBUG, EAL, "Support maximum %u logical core(s) by configuration.\n",
RTE_MAX_LCORE);
RTE_LOG(DEBUG, EAL, "Detected %u lcore(s)\n", config->lcore_count);
return 0;
}
int
main(int ac, char **av)
{
double srt;
double pollrate;
int ch;
char buf[64];
int monbat;
srt = 8.0; /* time for samples - 8 seconds */
pollrate = 1.0; /* polling rate in seconds */
while ((ch = getopt(ac, av, "b:cdefh:l:p:r:tu:B:L:P:QT:")) != -1) {
switch(ch) {
case 'b':
BackLightPct = strtol(optarg, NULL, 10);
break;
case 'c':
AdjustCstate = 1;
break;
case 'd':
DebugOpt = 1;
break;
case 'e':
HasPerfbias = 1;
break;
case 'f':
AdjustCpuFreq = 0;
break;
case 'h':
HighestCpuFreq = strtol(optarg, NULL, 10);
break;
case 'l':
LowestCpuFreq = strtol(optarg, NULL, 10);
break;
case 'p':
Hysteresis = (int)strtol(optarg, NULL, 10);
break;
case 'r':
pollrate = strtod(optarg, NULL);
break;
case 't':
TurboOpt = 0;
break;
case 'u':
TriggerUp = (double)strtol(optarg, NULL, 10) / 100;
break;
case 'B':
BatLifeMin = strtol(optarg, NULL, 10);
break;
case 'L':
BatShutdownLingerSet = strtol(optarg, NULL, 10);
if (BatShutdownLingerSet < 0)
BatShutdownLingerSet = 0;
break;
case 'P':
BatLifePollIntvl = strtol(optarg, NULL, 10);
break;
case 'Q':
BatShutdownAudioAlert = 0;
break;
case 'T':
srt = strtod(optarg, NULL);
break;
default:
usage();
/* NOT REACHED */
}
}
ac -= optind;
av += optind;
setlinebuf(stdout);
/* Get number of cpus */
get_ncpus();
if (0 > Hysteresis || Hysteresis > 99) {
fprintf(stderr, "Invalid hysteresis value\n");
exit(1);
}
if (0 > TriggerUp || TriggerUp > 1) {
fprintf(stderr, "Invalid load limit value\n");
exit(1);
}
if (BackLightPct > 100 || BackLightPct <= 0) {
fprintf(stderr, "Invalid backlight setting, ignore\n");
BackLightPct = 100;
}
TriggerDown = TriggerUp - (TriggerUp * (double) Hysteresis / 100);
/*
* Make sure powerd is not already running.
*/
PowerFd = open("/var/run/powerd.pid", O_CREAT|O_RDWR, 0644);
if (PowerFd < 0) {
fprintf(stderr,
"Cannot create /var/run/powerd.pid, "
"continuing anyway\n");
} else {
if (flock(PowerFd, LOCK_EX|LOCK_NB) < 0) {
fprintf(stderr, "powerd is already running\n");
exit(1);
}
}
/*
* Demonize and set pid
*/
if (DebugOpt == 0) {
daemon(0, 0);
openlog("powerd", LOG_CONS | LOG_PID, LOG_DAEMON);
}
if (PowerFd >= 0) {
ftruncate(PowerFd, 0);
snprintf(buf, sizeof(buf), "%d\n", (int)getpid());
write(PowerFd, buf, strlen(buf));
}
/* Do we need to monitor battery life? */
if (BatLifePollIntvl <= 0)
monbat = 0;
else
monbat = has_battery();
/* Do we have perfbias(4)? */
if (HasPerfbias)
HasPerfbias = has_perfbias();
/* Could we adjust C-state? */
if (AdjustCstate)
AdjustCstate = probe_cstate();
/*
* Wait hw.acpi.cpu.px_dom* sysctl to be created by kernel.
*
* Since hw.acpi.cpu.px_dom* creation is queued into ACPI
* taskqueue and ACPI taskqueue is shared across various
* ACPI modules, any delay in other modules may cause
* hw.acpi.cpu.px_dom* to be created at quite a later time
* (e.g. cmbat module's task could take quite a lot of time).
*/
for (;;) {
/* Prime delta cputime calculation. */
get_cputime(pollrate);
/* Wait for all cpus to appear */
if (acpi_get_cpupwrdom())
break;
usleep((int)(pollrate * 1000000.0));
}
/*
* Catch some signals so that max performance could be restored.
*/
signal(SIGINT, sigintr);
signal(SIGTERM, sigintr);
/* Initialize performance states */
init_perf();
srt = srt / pollrate; /* convert to sample count */
if (DebugOpt)
printf("samples for downgrading: %5.2f\n", srt);
/*
* Monitoring loop
*/
while (!stopped) {
/*
* Monitor performance
*/
get_cputime(pollrate);
mon_perf(srt);
/*
* Monitor battery
*/
if (monbat)
monbat = mon_battery();
usleep((int)(pollrate * 1000000.0));
}
/*
* Set to maximum performance if killed.
*/
syslog(LOG_INFO, "killed, setting max and exiting");
restore_perf();
restore_backlight();
exit(0);
}
/*
* locore.s code calls bootstrap() just before calling main().
*
* What we try to do is as follows:
* - Initialize PROM and the console
* - Read in part of information provided by a bootloader and find out
* kernel load and end addresses
* - Initialize ksyms
* - Find out number of active CPUs
* - Finalize the bootstrap by calling pmap_bootstrap()
*
* We will try to run out of the prom until we get out of pmap_bootstrap().
*/
void
bootstrap(void *o0, void *bootargs, void *bootsize, void *o3, void *ofw)
{
void *bi;
long bmagic;
char buf[32];
#if NKSYMS || defined(DDB) || defined(MODULAR)
struct btinfo_symtab *bi_sym;
#endif
struct btinfo_count *bi_count;
struct btinfo_kernend *bi_kend;
struct btinfo_tlb *bi_tlb;
struct btinfo_boothowto *bi_howto;
extern void *romtba;
extern void* get_romtba(void);
extern void OF_val2sym32(void *);
extern void OF_sym2val32(void *);
extern struct consdev consdev_prom;
/* Save OpenFrimware entry point */
romp = ofw;
romtba = get_romtba();
prom_init();
console_instance = promops.po_stdout;
console_node = OF_instance_to_package(promops.po_stdout);
/* Initialize the PROM console so printf will not panic */
cn_tab = &consdev_prom;
(*cn_tab->cn_init)(cn_tab);
DPRINTF(ACDB_BOOTARGS,
("sparc64_init(%p, %p, %p, %p, %p)\n", o0, bootargs, bootsize,
o3, ofw));
/* Extract bootinfo pointer */
if ((long)bootsize >= (4 * sizeof(uint64_t))) {
/* Loaded by 64-bit bootloader */
bi = (void*)(u_long)(((uint64_t*)bootargs)[3]);
bmagic = (long)(((uint64_t*)bootargs)[0]);
} else if ((long)bootsize >= (4 * sizeof(uint32_t))) {
/* Loaded by 32-bit bootloader */
bi = (void*)(u_long)(((uint32_t*)bootargs)[3]);
bmagic = (long)(((uint32_t*)bootargs)[0]);
} else {
printf("Bad bootinfo size.\n");
die_old_boot_loader:
printf("This kernel requires NetBSD boot loader version 1.9 "
"or newer\n");
panic("sparc64_init.");
}
DPRINTF(ACDB_BOOTARGS,
("sparc64_init: bmagic=%lx, bi=%p\n", bmagic, bi));
/* Read in the information provided by NetBSD boot loader */
if (SPARC_MACHINE_OPENFIRMWARE != bmagic) {
printf("No bootinfo information.\n");
goto die_old_boot_loader;
}
bootinfo = (void*)(u_long)((uint64_t*)bi)[1];
LOOKUP_BOOTINFO(bi_kend, BTINFO_KERNEND);
if (bi_kend->addr == (vaddr_t)0) {
panic("Kernel end address is not found in bootinfo.\n");
}
#if NKSYMS || defined(DDB) || defined(MODULAR)
LOOKUP_BOOTINFO(bi_sym, BTINFO_SYMTAB);
ksyms_addsyms_elf(bi_sym->nsym, (int *)(u_long)bi_sym->ssym,
(int *)(u_long)bi_sym->esym);
#ifdef DDB
#ifdef __arch64__
/* This can only be installed on an 64-bit system cause otherwise our stack is screwed */
OF_set_symbol_lookup(OF_sym2val, OF_val2sym);
#else
OF_set_symbol_lookup(OF_sym2val32, OF_val2sym32);
#endif
#endif
#endif
if (OF_getprop(findroot(), "compatible", buf, sizeof(buf)) > 0) {
if (strcmp(buf, "sun4us") == 0)
setcputyp(CPU_SUN4US);
else if (strcmp(buf, "sun4v") == 0)
setcputyp(CPU_SUN4V);
}
bi_howto = lookup_bootinfo(BTINFO_BOOTHOWTO);
if (bi_howto)
boothowto = bi_howto->boothowto;
LOOKUP_BOOTINFO(bi_count, BTINFO_DTLB_SLOTS);
kernel_dtlb_slots = bi_count->count;
kernel_itlb_slots = kernel_dtlb_slots-1;
bi_count = lookup_bootinfo(BTINFO_ITLB_SLOTS);
if (bi_count)
kernel_itlb_slots = bi_count->count;
LOOKUP_BOOTINFO(bi_tlb, BTINFO_DTLB);
kernel_tlbs = &bi_tlb->tlb[0];
get_ncpus();
pmap_bootstrap(KERNBASE, bi_kend->addr);
}