static void init_fan_ctrl (void *base_adr)
{
uint8_t mask = 0, freeze_mode = 0, fan_req = 0;
volatile fan_ctrl_t *ctrl = (fan_ctrl_t *)base_adr;
/* Program all needed fields of FAN controller. */
FPGA_SET_PARAM(FANSensorSelect, ctrl->sensorselect);
FPGA_SET_PARAM(T_Warn, ctrl->t_warn);
FPGA_SET_PARAM(T_Crit, ctrl->t_crit);
FPGA_SET_PARAM(FANSamplingTime, ctrl->samplingtime);
FPGA_SET_PARAM(FANSetPoint, ctrl->setpoint);
FPGA_SET_PARAM(FANHystCtrl, ctrl->hystctrl);
FPGA_SET_PARAM(FANHystVal, ctrl->hystval);
FPGA_SET_PARAM(FANHystThreshold, ctrl->hystthreshold);
FPGA_SET_PARAM(FANKp, ctrl->kp);
FPGA_SET_PARAM(FANKi, ctrl->ki);
FPGA_SET_PARAM(FANKd, ctrl->kd);
FPGA_SET_PARAM(FANMaxSpeed, ctrl->fanmax);
/* Set freeze and FAN configuration. */
if ((hwilib_get_field(FF_FanReq, &fan_req, 1) == 1) &&
(hwilib_get_field(FF_FreezeDis, &freeze_mode, 1) == 1)) {
if (!fan_req)
mask = 1;
else if (fan_req && freeze_mode)
mask = 2;
else
mask = 3;
ctrl->fanmon = mask << 10;
}
}
static void init_temp_mon (void *base_adr)
{
uint32_t cc[5], i = 0;
uint8_t num = 0;
volatile fan_ctrl_t *ctrl = (fan_ctrl_t *)base_adr;
/* Program sensor delay first. */
FPGA_SET_PARAM(FANSensorDelay, ctrl->sensordelay);
/* Program correction curve for every used sensor. */
if (hwilib_get_field(FANSensorNum, &num, sizeof(num) != sizeof(num)) ||
(num == 0) || (num > MAX_NUM_SENSORS))
return;
for (i = 0; i < num; i ++) {
if (hwilib_get_field(FANSensorCfg0 + i, (uint8_t *)&cc[0],
sizeof(cc)) == sizeof(cc)) {
ctrl->sensorcfg[cc[0]].rmin = cc[1] & 0xffff;
ctrl->sensorcfg[cc[0]].rmax = cc[2] & 0xffff;
ctrl->sensorcfg[cc[0]].nmin = cc[3] & 0xffff;
ctrl->sensorcfg[cc[0]].nmax = cc[4] & 0xffff;
}
}
ctrl->sensornum = num;
}
static void wait_for_legacy_dev(void *unused)
{
uint32_t legacy_delay, us_since_boot;
struct stopwatch sw;
/* Open main hwinfo block. */
if (hwilib_find_blocks("hwinfo.hex") != CB_SUCCESS)
return;
/* Get legacy delay parameter from hwinfo. */
if (hwilib_get_field(LegacyDelay, (uint8_t *) &legacy_delay,
sizeof(legacy_delay)) != sizeof(legacy_delay))
return;
us_since_boot = get_us_since_boot();
/* No need to wait if the time since boot is already long enough.*/
if (us_since_boot > legacy_delay)
return;
stopwatch_init_msecs_expire(&sw, (legacy_delay - us_since_boot) / 1000);
printk(BIOS_NOTICE, "Wait remaining %d of %d us for legacy devices...",
legacy_delay - us_since_boot, legacy_delay);
stopwatch_wait_until_expired(&sw);
printk(BIOS_NOTICE, "done!\n");
}
/** \brief This functions sets up the DP2LVDS-converter to be used with the
* appropriate lcd panel
* @param *hwi_block Filename in CBFS of the block to use as HW-Info
* @return 0 on success or error code
*/
int ptn3460_init(char *hwi_block)
{
struct ptn_3460_config cfg;
int status;
uint8_t disp_con = 0, color_depth = 0;
uint8_t edid_data[0x80];
uint8_t hwid[4], tcu31_hwid[4] = {7, 9, 2, 0};
if (!hwi_block || hwilib_find_blocks(hwi_block) != CB_SUCCESS) {
printk(BIOS_ERR, "LCD: Info block \"%s\" not found!\n",
hwi_block);
return 1;
}
status = i2c_init(PTN_I2C_CONTROLER);
if (status)
return (PTN_BUS_ERROR | status);
/* Get all needed information from hwinfo block */
if (hwilib_get_field(Edid, edid_data, 0x80) != sizeof(edid_data)) {
printk(BIOS_ERR, "LCD: No EDID data available in %s\n",
hwi_block);
return 1;
}
if ((hwilib_get_field(PF_DisplCon, &disp_con, 1) != 1)) {
printk(BIOS_ERR, "LCD: Missing panel features from %s\n",
hwi_block);
return 1;
}
if (hwilib_get_field(PF_Color_Depth ,&color_depth, 1) != 1) {
printk(BIOS_ERR, "LCD: Missing panel features from %s\n",
hwi_block);
return 1;
}
if (hwilib_get_field(HWID, hwid, sizeof(hwid)) != sizeof(hwid)) {
printk(BIOS_ERR, "LCD: Missing HW-ID from %s\n",
hwi_block);
return 1;
}
/* Here, all the desired information for setting up DP2LVDS converter*/
/* are present. Inside the converter, table 6 will be used for */
/* the timings. */
if ((status = ptn3460_write_edid(6, edid_data)) != 0)
return status;
/* Select this table to be emulated */
ptn_select_edid(6);
/* Read PTN configuration data */
status = i2c_read(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF,
(u8*)&cfg, PTN_CONFIG_LEN);
if (status)
return (PTN_BUS_ERROR | status);
/* Set up configuration data according to the hwinfo blocks we get */
cfg.dp_interface_ctrl = 0;
cfg.lvds_interface_ctrl1 = 0x00;
if (disp_con == PF_DISPLCON_LVDS_DUAL)
cfg.lvds_interface_ctrl1 |= 0x0b; /* Turn on dual LVDS lane and clock */
if (color_depth == PF_COLOR_DEPTH_6BIT)
cfg.lvds_interface_ctrl1 |= 0x20; /* Use 18 bits per pixel */
cfg.lvds_interface_ctrl2 = 0x03; /* no clock spreading, 300 mV LVDS swing */
if (memcmp(hwid, tcu31_hwid, sizeof(hwid)))
cfg.lvds_interface_ctrl3 = 0x00; /* no LVDS signal swap */
else
cfg.lvds_interface_ctrl3 = 0x01; /* swap LVDS even and odd */
cfg.t2_delay = 1; /* Delay T2 (VDD to LVDS active) by 16 ms */
cfg.t3_timing = 10; /* 500 ms from LVDS to backlight active */
cfg.t12_timing = 20; /* 1 second re-power delay */
cfg.t4_timing = 3; /* 150 ms backlight off to LVDS inactive */
cfg.t5_delay = 1; /* Delay T5 (LVDS to VDD inactive) by 16 ms */
cfg.backlight_ctrl = 0; /* Enable backlight control */
/* Write back configuration data to PTN3460 */
status = i2c_write(PTN_I2C_CONTROLER, PTN_SLAVE_ADR, PTN_CONFIG_OFF,
(u8*)&cfg, PTN_CONFIG_LEN);
if (status)
return (PTN_BUS_ERROR | status);
else
return PTN_NO_ERROR;
}
