/* * Prepare the namespace - decide what/where to mount, load ramdisks, etc. */ void __init prepare_namespace(void) { int is_floppy; if (root_delay) { printk(KERN_INFO "Waiting %dsec before mounting root device...\n", root_delay); ssleep(root_delay); } /* * wait for the known devices to complete their probing * * Note: this is a potential source of long boot delays. * For example, it is not atypical to wait 5 seconds here * for the touchpad of a laptop to initialize. */ wait_for_device_probe(); md_run_setup(); if (saved_root_name[0]) { root_device_name = saved_root_name; printk(KERN_DEBUG "root_device_name: %s\n",root_device_name); if (!strncmp(root_device_name, "mtd", 3) || !strncmp(root_device_name, "ubi", 3)) { mount_block_root(root_device_name, root_mountflags); goto out; } ROOT_DEV = name_to_dev_t(root_device_name); if (strncmp(root_device_name, "/dev/", 5) == 0) root_device_name += 5; } if (initrd_load()) goto out; /* wait for any asynchronous scanning to complete */ if ((ROOT_DEV == 0) && root_wait) { printk(KERN_INFO "Waiting for root device %s...\n", saved_root_name); while (driver_probe_done() != 0 || (ROOT_DEV = name_to_dev_t(saved_root_name)) == 0) msleep(100); async_synchronize_full(); } is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR; if (is_floppy && rd_doload && rd_load_disk(0)) ROOT_DEV = Root_RAM0; mount_root(); out: devtmpfs_mount("dev"); printk(KERN_DEBUG "after devtmpfs_mount\n"); sys_mount(".", "/", NULL, MS_MOVE, NULL); printk(KERN_DEBUG "after sys_mount\n"); sys_chroot((const char __user __force *)"."); }
void __init mount_root(void) { #ifdef CONFIG_ROOT_NFS if (MAJOR(ROOT_DEV) == UNNAMED_MAJOR) { if (mount_nfs_root()) return; printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); ROOT_DEV = Root_FD0; } #endif #ifdef CONFIG_BLK_DEV_FD if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) { /* rd_doload is 2 for a dual initrd/ramload setup */ if (rd_doload==2) { if (rd_load_disk(1)) { ROOT_DEV = Root_RAM1; root_device_name = NULL; } } else change_floppy("root floppy"); } #endif create_dev("/dev/root", ROOT_DEV, root_device_name); mount_block_root("/dev/root", root_mountflags); }
/* * Prepare the namespace - decide what/where to mount, load ramdisks, etc. */ void __init prepare_namespace(void) { int is_floppy; if (root_delay) { printk(KERN_INFO "Waiting %dsec before mounting root device...\n", root_delay); ssleep(root_delay); } /* wait for the known devices to complete their probing */ while (driver_probe_done() != 0) msleep(100); md_run_setup(); if (saved_root_name[0]) { root_device_name = saved_root_name; if (!strncmp(root_device_name, "mtd", 3) || !strncmp(root_device_name, "ubi", 3) || !strncmp(root_device_name, "mmc", 3)) { mount_block_root(root_device_name, root_mountflags); goto out; } ROOT_DEV = name_to_dev_t(root_device_name); if (strncmp(root_device_name, "/dev/", 5) == 0) root_device_name += 5; } if (initrd_load()) goto out; /* wait for any asynchronous scanning to complete */ if ((ROOT_DEV == 0) && root_wait) { printk(KERN_INFO "Waiting for root device %s...\n", saved_root_name); while (driver_probe_done() != 0 || (ROOT_DEV = name_to_dev_t(saved_root_name)) == 0) msleep(100); } is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR; if (is_floppy && rd_doload && rd_load_disk(0)) ROOT_DEV = Root_RAM0; mount_root(); out: sys_mount(".", "/", NULL, MS_MOVE, NULL); sys_chroot("."); security_sb_post_mountroot(); }
static void __init handle_initrd(void) { int error; int pid; real_root_dev = new_encode_dev(ROOT_DEV); create_dev("/dev/root.old", Root_RAM0); /* mount initrd on rootfs' /root */ mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY); sys_mkdir((const char __user *)"/old", 0700); root_fd = sys_open((const char __user *)"/", 0, 0); old_fd = sys_open((const char __user *)"/old", 0, 0); /* move initrd over / and chdir/chroot in initrd root */ sys_chdir((const char __user *)"/root"); sys_mount((char __user *)".", (char __user *)"/", NULL, MS_MOVE, NULL); sys_chroot((const char __user *)"."); /* * In case that a resume from disk is carried out by linuxrc or one of * its children, we need to tell the freezer not to wait for us. */ current->flags |= PF_FREEZER_SKIP; pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD); if (pid > 0) while (pid != sys_wait4(-1, NULL, 0, NULL)) yield(); current->flags &= ~PF_FREEZER_SKIP; /* move initrd to rootfs' /old */ sys_fchdir(old_fd); sys_mount((char __user *)"/", (char __user *)".", NULL, MS_MOVE, NULL); /* switch root and cwd back to / of rootfs */ sys_fchdir(root_fd); sys_chroot((const char __user *)"."); sys_close(old_fd); sys_close(root_fd); if (new_decode_dev(real_root_dev) == Root_RAM0) { sys_chdir((const char __user *)"/old"); return; } ROOT_DEV = new_decode_dev(real_root_dev); mount_root(); printk(KERN_NOTICE "Trying to move old root to /initrd ... "); error = sys_mount((char __user *)"/old", (char __user *)"/root/initrd", NULL, MS_MOVE, NULL); if (!error) printk("okay\n"); else { int fd = sys_open((const char __user *)"/dev/root.old", O_RDWR, 0); if (error == -ENOENT) printk("/initrd does not exist. Ignored.\n"); else printk("failed\n"); printk(KERN_NOTICE "Unmounting old root\n"); sys_umount((char __user *)"/old", MNT_DETACH); printk(KERN_NOTICE "Trying to free ramdisk memory ... "); if (fd < 0) { error = fd; } else { error = sys_ioctl(fd, BLKFLSBUF, 0); sys_close(fd); } printk(!error ? "okay\n" : "failed\n"); } }
static int __init mount_nfs_root(void) { char *root_dev, *root_data; unsigned int timeout; int try, err; err = nfs_root_data(&root_dev, &root_data); if (err != 0) return 0; /* * The server or network may not be ready, so try several * times. Stop after a few tries in case the client wants * to fall back to other boot methods. */ timeout = NFSROOT_TIMEOUT_MIN; for (try = 1; ; try++) { err = do_mount_root(root_dev, "nfs", root_mountflags, root_data); if (err == 0) return 1; if (try > NFSROOT_RETRY_MAX) break; /* Wait, in case the server refused us immediately */ ssleep(timeout); timeout <<= 1; if (timeout > NFSROOT_TIMEOUT_MAX) timeout = NFSROOT_TIMEOUT_MAX; } return 0; } #endif #if defined(CONFIG_BLK_DEV_RAM) || defined(CONFIG_BLK_DEV_FD) void __init change_floppy(char *fmt, ...) { struct termios termios; char buf[80]; char c; int fd; va_list args; va_start(args, fmt); vsprintf(buf, fmt, args); va_end(args); fd = sys_open("/dev/root", O_RDWR | O_NDELAY, 0); if (fd >= 0) { sys_ioctl(fd, FDEJECT, 0); sys_close(fd); } printk(KERN_NOTICE "VFS: Insert %s and press ENTER\n", buf); fd = sys_open("/dev/console", O_RDWR, 0); if (fd >= 0) { sys_ioctl(fd, TCGETS, (long)&termios); termios.c_lflag &= ~ICANON; sys_ioctl(fd, TCSETSF, (long)&termios); sys_read(fd, &c, 1); termios.c_lflag |= ICANON; sys_ioctl(fd, TCSETSF, (long)&termios); sys_close(fd); } } #endif void __init mount_root(void) { #ifdef CONFIG_ROOT_NFS if (ROOT_DEV == Root_NFS) { if (mount_nfs_root()) return; printk(KERN_ERR "VFS: Unable to mount root fs via NFS, trying floppy.\n"); ROOT_DEV = Root_FD0; } #endif #ifdef CONFIG_BLK_DEV_FD if (MAJOR(ROOT_DEV) == FLOPPY_MAJOR) { /* rd_doload is 2 for a dual initrd/ramload setup */ if (rd_doload==2) { if (rd_load_disk(1)) { ROOT_DEV = Root_RAM1; root_device_name = NULL; } } else change_floppy("root floppy"); } #endif #ifdef CONFIG_BLOCK create_dev("/dev/root", ROOT_DEV); mount_block_root("/dev/root", root_mountflags); #endif } /* * Prepare the namespace - decide what/where to mount, load ramdisks, etc. */ void __init prepare_namespace(void) { int is_floppy; if (root_delay) { printk(KERN_INFO "Waiting %dsec before mounting root device...\n", root_delay); ssleep(root_delay); } /* * wait for the known devices to complete their probing * * Note: this is a potential source of long boot delays. * For example, it is not atypical to wait 5 seconds here * for the touchpad of a laptop to initialize. */ wait_for_device_probe(); md_run_setup(); if (saved_root_name[0]) { root_device_name = saved_root_name; if (!strncmp(root_device_name, "mtd", 3) || !strncmp(root_device_name, "ubi", 3)) { mount_block_root(root_device_name, root_mountflags); goto out; } ROOT_DEV = name_to_dev_t(root_device_name); if (strncmp(root_device_name, "/dev/", 5) == 0) root_device_name += 5; } if (initrd_load()) goto out; /* wait for any asynchronous scanning to complete */ if ((ROOT_DEV == 0) && root_wait) { printk(KERN_INFO "Waiting for root device %s...\n", saved_root_name); while (driver_probe_done() != 0 || (ROOT_DEV = name_to_dev_t(saved_root_name)) == 0) msleep(100); async_synchronize_full(); } is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR; if (is_floppy && rd_doload && rd_load_disk(0)) ROOT_DEV = Root_RAM0; mount_root(); out: devtmpfs_mount("dev"); sys_mount(".", "/", NULL, MS_MOVE, NULL); sys_chroot("."); }
/* * Prepare the namespace - decide what/where to mount, load ramdisks, etc. */ void __init prepare_namespace(void) { int is_floppy; if (root_delay) { printk(KERN_INFO "Waiting %dsec before mounting root device...\n", root_delay); ssleep(root_delay); } /* * wait for the known devices to complete their probing * * Note: this is a potential source of long boot delays. * For example, it is not atypical to wait 5 seconds here * for the touchpad of a laptop to initialize. */ wait_for_device_probe(); md_run_setup(); if (saved_root_name[0]) { root_device_name = saved_root_name; if (!strncmp(root_device_name, "mtd", 3) || !strncmp(root_device_name, "ubi", 3)) { mount_block_root(root_device_name, root_mountflags); goto out; } #ifdef CONFIG_RTL_FLASH_DUAL_IMAGE_ENABLE extern int is_bank2_root(); //extern from rtl_gpio.c if(is_bank2_root()) //assume bank1 root is mtdblock1 , bank2's root is mtdblock3 strcpy(root_device_name,"/dev/mtdblock3"); #endif ROOT_DEV = name_to_dev_t(root_device_name); if (strncmp(root_device_name, "/dev/", 5) == 0) root_device_name += 5; } if (initrd_load()) goto out; /* wait for any asynchronous scanning to complete */ if ((ROOT_DEV == 0) && root_wait) { printk(KERN_INFO "Waiting for root device %s...\n", saved_root_name); while (driver_probe_done() != 0 || (ROOT_DEV = name_to_dev_t(saved_root_name)) == 0) msleep(100); async_synchronize_full(); } is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR; if (is_floppy && rd_doload && rd_load_disk(0)) ROOT_DEV = Root_RAM0; mount_root(); out: sys_mount(".", "/", NULL, MS_MOVE, NULL); sys_chroot("."); }
static void __init handle_initrd(void) { int error; int pid; real_root_dev = new_encode_dev(ROOT_DEV); create_dev("/dev/root.old", Root_RAM0); /* mount initrd on rootfs' /root */ mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY); sys_mkdir("/old", 0700); root_fd = sys_open("/", 0, 0); old_fd = sys_open("/old", 0, 0); /* move initrd over / and chdir/chroot in initrd root */ sys_chdir("/root"); sys_mount(".", "/", NULL, MS_MOVE, NULL); sys_chroot("."); pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD); if (pid > 0) { while (pid != sys_wait4(-1, NULL, 0, NULL)) { try_to_freeze(); yield(); } } /* move initrd to rootfs' /old */ sys_fchdir(old_fd); sys_mount("/", ".", NULL, MS_MOVE, NULL); /* switch root and cwd back to / of rootfs */ sys_fchdir(root_fd); sys_chroot("."); sys_close(old_fd); sys_close(root_fd); if (new_decode_dev(real_root_dev) == Root_RAM0) { sys_chdir("/old"); return; } ROOT_DEV = new_decode_dev(real_root_dev); mount_root(); printk(KERN_NOTICE "Trying to move old root to /initrd ... "); error = sys_mount("/old", "/root/initrd", NULL, MS_MOVE, NULL); if (!error) printk("okay\n"); else { int fd = sys_open("/dev/root.old", O_RDWR, 0); if (error == -ENOENT) printk("/initrd does not exist. Ignored.\n"); else printk("failed\n"); printk(KERN_NOTICE "Unmounting old root\n"); sys_umount("/old", MNT_DETACH); printk(KERN_NOTICE "Trying to free ramdisk memory ... "); if (fd < 0) { error = fd; } else { error = sys_ioctl(fd, BLKFLSBUF, 0); sys_close(fd); } printk(!error ? "okay\n" : "failed\n"); } }