FOOTPRINT_VIEWER_FRAME* FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer( const KIWAY_PLAYER* aParent )
{
wxASSERT( aParent );
// We search only within the current project, and do so by limiting
// the search scope to a wxWindow hierarchy subset. Find the top most
// KIWAY_PLAYER which is part of this PROJECT by matching its KIWAY* to the
// most immediate parent's.
// NOTE: an open FOOTPRINT_VIEWER_FRAME may have either the PCB_EDIT_FRAME
// or the FOOTPRINT_EDIT_FRAME as parent.
KIWAY* kiway = &aParent->Kiway();
wxWindow* frame;
while( (frame = aParent->GetParent()) != NULL )
{
// will go NULL when we reach a non-KIWAY_PLAYER
KIWAY_PLAYER* kwp = dynamic_cast<KIWAY_PLAYER*>( frame );
if( kwp && &kwp->Kiway() == kiway )
aParent = kwp;
else
break;
}
return (FOOTPRINT_VIEWER_FRAME*) wxWindow::FindWindowByName(
GetFootprintViewerFrameName(), aParent );
}
void DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB::showButtonHandler( wxCommandEvent& event )
{
unsigned fieldNdx = getSelectedFieldNdx();
if( fieldNdx == DATASHEET )
{
wxString datasheet_uri = fieldValueTextCtrl->GetValue();
::wxLaunchDefaultBrowser( datasheet_uri );
}
else if( fieldNdx == FOOTPRINT )
{
// pick a footprint using the footprint picker.
wxString fpid;
KIWAY_PLAYER* frame = Kiway().Player( FRAME_PCB_MODULE_VIEWER_MODAL, true );
if( frame->ShowModal( &fpid, this ) )
{
// DBG( printf( "%s: %s\n", __func__, TO_UTF8( fpid ) ); )
fieldValueTextCtrl->SetValue( fpid );
}
frame->Destroy();
}
}
void KIWAY::SetLanguage( int aLanguage )
{
Pgm().SetLanguageIdentifier( aLanguage );
Pgm().SetLanguage();
#if 1
// This is a risky hack that goes away if we allow the language to be
// set only from the top most frame if !Kiface.IsSingle()
// Only for the C++ project manager, and not for the python one and not for
// single_top do we look for the EDA_BASE_FRAME as the top level window.
// For single_top this is not needed because that window is registered in
// the array below.
if( m_ctl & KFCTL_CPP_PROJECT_SUITE )
{
// A dynamic_cast could be better, but creates link issues
// (some basic_frame functions not found) on some platforms,
// so a static_cast is used.
EDA_BASE_FRAME* top = static_cast<EDA_BASE_FRAME*>( m_top );
if( top )
top->ShowChangedLanguage();
}
#endif
for( unsigned i=0; i < KIWAY_PLAYER_COUNT; ++i )
{
KIWAY_PLAYER* frame = GetPlayerFrame( ( FRAME_T )i );
if( frame )
{
frame->ShowChangedLanguage();
}
}
}
void PCB_EDIT_FRAME::OnUpdatePCBFromSch( wxCommandEvent& event )
{
if( Kiface().IsSingle() )
{
DisplayError( this, _( "Cannot update the PCB, because the Kicad is"
" opened in stand-alone mode. In order to create/update"
" PCBs from schematics, you need to launch Kicad shell"
" and create a PCB project." ) );
return;
}
else
{
KIWAY_PLAYER* frame = Kiway().Player( FRAME_SCH, true );
wxFileName schfn = Prj().AbsolutePath( Prj().GetProjectName() );
schfn.SetExt( SchematicFileExtension );
if( !frame->IsVisible() )
{
frame->OpenProjectFiles( std::vector<wxString>( 1, schfn.GetFullPath() ) );
frame->Show( false );
}
Kiway().ExpressMail( FRAME_SCH, MAIL_SCH_PCB_UPDATE_REQUEST, "", this );
}
}
void KICAD_MANAGER_FRAME::RunEeschema( const wxString& aProjectSchematicFileName )
{
KIWAY_PLAYER* frame = Kiway.Player( FRAME_SCH, false );
if( !frame )
{
frame = Kiway.Player( FRAME_SCH, true );
frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectSchematicFileName ) );
frame->Show( true );
}
frame->Raise();
}
void KICAD_MANAGER_FRAME::OnRunSchLibEditor( wxCommandEvent& event )
{
KIWAY_PLAYER* frame = Kiway.Player( FRAME_SCH_LIB_EDITOR, false );
if( !frame )
{
frame = Kiway.Player( FRAME_SCH_LIB_EDITOR, true );
// frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectSchematicFileName ) );
frame->Show( true );
}
frame->Raise();
}
void KICAD_MANAGER_FRAME::OnRunPcbFpEditor( wxCommandEvent& event )
{
KIWAY_PLAYER* frame = Kiway.Player( FRAME_PCB_MODULE_EDITOR, false );
if( !frame )
{
frame = Kiway.Player( FRAME_PCB_MODULE_EDITOR, true );
// frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectBoardFileName ) );
frame->Show( true );
}
frame->Raise();
}
void DIALOG_EXCHANGE_MODULE::ViewAndSelectFootprint( wxCommandEvent& event )
{
wxString newname;
KIWAY_PLAYER* frame = Kiway().Player( FRAME_PCB_MODULE_VIEWER_MODAL, true );
if( frame->ShowModal( &newname, this ) )
{
m_NewFootprintFPID->SetValue( newname );
}
frame->Destroy();
}
void DIALOG_EDIT_ONE_FIELD::OnTextValueSelectButtonClick( wxCommandEvent& aEvent )
{
// pick a footprint using the footprint picker.
wxString fpid;
KIWAY_PLAYER* frame = Kiway().Player( FRAME_PCB_MODULE_VIEWER_MODAL, true );
if( frame->ShowModal( &fpid, this ) )
{
m_TextValue->SetValue( fpid );
}
frame->Destroy();
}
void KICAD_MANAGER_FRAME::RunEeschema( const wxString& aProjectSchematicFileName )
{
KIWAY_PLAYER* frame;
try
{
frame = Kiway().Player( FRAME_SCH, true );
}
catch( const IO_ERROR& err )
{
wxMessageBox( _( "Eeschema failed to load:\n" ) + err.What(),
_( "KiCad Error" ), wxOK | wxICON_ERROR, this );
return;
}
if( !frame->IsShown() ) // A hidden frame might not have the project loaded.
{
if( !frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectSchematicFileName ) ) )
return;
frame->Show( true );
}
// On Windows, Raise() does not bring the window on screen, when iconized or not shown
// On linux, Raise() brings the window on screen, but this code works fine
if( frame->IsIconized() )
{
frame->Iconize( false );
// If an iconized frame was created by Pcbnew, Iconize( false ) is not enough
// to show the frame at its normal size: Maximize should be called.
frame->Maximize( false );
}
frame->Raise();
}
void KICAD_MANAGER_FRAME::OnRunCvpcb( wxCommandEvent& event )
{
wxFileName fn( GetProjectFileName() );
fn.SetExt( NetlistFileExtension );
KIWAY_PLAYER* frame = Kiway.Player( FRAME_CVPCB, false );
if( !frame )
{
frame = Kiway.Player( FRAME_CVPCB, true );
frame->OpenProjectFiles( std::vector<wxString>( 1, fn.GetFullPath() ) );
frame->Show( true );
}
frame->Raise();
}
void PGM_SINGLE_TOP::MacOpenFile( const wxString& aFileName )
{
wxFileName filename( aFileName );
if( filename.FileExists() )
{
#if 0
// this pulls in EDA_DRAW_FRAME type info, which we don't want in
// the single_top link image.
KIWAY_PLAYER* frame = dynamic_cast<KIWAY_PLAYER*>( App().GetTopWindow() );
#else
KIWAY_PLAYER* frame = (KIWAY_PLAYER*) App().GetTopWindow();
#endif
if( frame )
frame->OpenProjectFiles( std::vector<wxString>( 1, aFileName ) );
}
}
void KICAD_MANAGER_FRAME::OnRunPcbFpEditor( wxCommandEvent& event )
{
KIWAY_PLAYER* frame = Kiway.Player( FRAME_PCB_MODULE_EDITOR, false );
if( !frame )
{
frame = Kiway.Player( FRAME_PCB_MODULE_EDITOR, true );
// frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectBoardFileName ) );
frame->Show( true );
}
// On Windows, Raise() does not bring the window on screen, when iconized
if( frame->IsIconized() )
frame->Iconize( false );
frame->Raise();
}
KIWAY_PLAYER* KIWAY::Player( FRAME_T aFrameType, bool doCreate, KIWAY_PLAYER* aParent )
{
// Since this will be called from python, cannot assume that code will
// not pass a bad aFrameType.
if( unsigned( aFrameType ) >= KIWAY_PLAYER_COUNT )
{
// @todo : throw an exception here for python's benefit, at least that
// way it gets some explanatory text.
wxASSERT_MSG( 0, wxT( "caller has a bug, passed a bad aFrameType" ) );
return NULL;
}
// return the previously opened window
KIWAY_PLAYER* frame = GetPlayerFrame( aFrameType );
if( frame )
return frame;
if( doCreate )
{
FACE_T face_type = KifaceType( aFrameType );
wxASSERT( face_type != FACE_T(-1) );
KIFACE* kiface = KiFACE( face_type );
wxASSERT( kiface );
if( kiface )
{
frame = (KIWAY_PLAYER*) kiface->CreateWindow(
aParent, // Parent window of frame, NULL in non modal mode
aFrameType,
this,
m_ctl // questionable need, these same flags where passed to the KIFACE::OnKifaceStart()
);
wxASSERT( frame );
m_playerFrameName[aFrameType] = frame->GetName();
return frame;
}
}
return NULL;
}
void KICAD_MANAGER_FRAME::RunEeschema( const wxString& aProjectSchematicFileName )
{
KIWAY_PLAYER* frame = Kiway.Player( FRAME_SCH, false );
// Please: note: DIALOG_EDIT_LIBENTRY_FIELDS_IN_LIB::initBuffers() calls
// Kiway.Player( FRAME_SCH, true )
// therefore, the schematic editor is sometimes running, but the schematic project
// is not loaded, if the library editor was called, and the dialog field editor was used.
// On linux, it happens the first time the schematic editor is launched, if
// library editor was running, and the dialog field editor was open
// On Windows, it happens always after the library editor was called,
// and the dialog field editor was used
if( !frame )
{
frame = Kiway.Player( FRAME_SCH, true );
}
if( !frame->IsShown() ) // the frame exists, (created by the dialog field editor)
// but no project loaded.
{
frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectSchematicFileName ) );
frame->Show( true );
}
// On Windows, Raise() does not bring the window on screen, when iconized or not shown
// On linux, Raise() brings the window on screen, but this code works fine
if( frame->IsIconized() )
frame->Iconize( false );
frame->Raise();
}
void KICAD_MANAGER_FRAME::RunPcbNew( const wxString& aProjectBoardFileName )
{
KIWAY_PLAYER* frame;
try
{
frame = Kiway().Player( FRAME_PCB, true );
}
catch( const IO_ERROR& err )
{
wxMessageBox( _( "Pcbnew failed to load:\n" ) + err.What(), _( "KiCad Error" ),
wxOK | wxICON_ERROR, this );
return;
}
if( !frame->IsVisible() ) // A hidden frame might not have the board loaded.
{
if( !frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectBoardFileName ) ) )
return;
frame->Show( true );
}
// On Windows, Raise() does not bring the window on screen, when iconized
if( frame->IsIconized() )
frame->Iconize( false );
frame->Raise();
}
bool KIWAY::PlayerClose( FRAME_T aFrameType, bool doForce )
{
// Since this will be called from python, cannot assume that code will
// not pass a bad aFrameType.
if( unsigned( aFrameType ) >= KIWAY_PLAYER_COUNT )
{
// @todo : throw an exception here for python's benefit, at least that
// way it gets some explanatory text.
wxASSERT_MSG( 0, wxT( "caller has a bug, passed a bad aFrameType" ) );
return false;
}
KIWAY_PLAYER* frame = GetPlayerFrame( aFrameType );
if( frame == NULL ) // Already closed
return true;
if( frame->Close( doForce ) )
return true;
return false;
}
bool KIWAY::ProcessEvent( wxEvent& aEvent )
{
KIWAY_EXPRESS* mail = dynamic_cast<KIWAY_EXPRESS*>( &aEvent );
if( mail )
{
FRAME_T dest = mail->Dest();
// see if recipient is alive
KIWAY_PLAYER* alive = Player( dest, false );
if( alive )
{
#if 1
return alive->ProcessEvent( aEvent );
#else
alive->KiwayMailIn( *mail );
return true;
#endif
}
}
return false;
}
void KICAD_MANAGER_FRAME::RunPcbNew( const wxString& aProjectBoardFileName )
{
KIWAY_PLAYER* frame = Kiway.Player( FRAME_PCB, true );
// a pcb frame can be already existing, but not yet used.
// this is the case when running the footprint editor, or the footprint viewer first
// if the frame is not visible, the board is not yet loaded
if( !frame->IsVisible() )
{
frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectBoardFileName ) );
frame->Show( true );
}
// On Windows, Raise() does not bring the window on screen, when iconized
if( frame->IsIconized() )
frame->Iconize( false );
frame->Raise();
}
void KICAD_MANAGER_FRAME::RunPcbNew( const wxString& aProjectBoardFileName )
{
#if 0 // line 171 of modview_frame.cpp breaks this code
KIWAY_PLAYER* frame = Kiway.Player( FRAME_PCB, false );
if( !frame )
{
frame = Kiway.Player( FRAME_PCB, true );
frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectBoardFileName ) );
frame->Show( true );
}
#else
KIWAY_PLAYER* frame = Kiway.Player( FRAME_PCB, true );
if( !frame->IsVisible() )
{
frame->OpenProjectFiles( std::vector<wxString>( 1, aProjectBoardFileName ) );
frame->Show( true );
}
#endif
frame->Raise();
}
void KICAD_MANAGER_FRAME::OnRunPcbFpEditor( wxCommandEvent& event )
{
KIWAY_PLAYER* frame;
try
{
frame = Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
}
catch( const IO_ERROR& err )
{
wxMessageBox( _( "Footprint library editor failed to load:\n" ) + err.What(),
_( "KiCad Error" ), wxOK | wxICON_ERROR, this );
return;
}
if( !frame->IsShown() )
frame->Show( true );
// On Windows, Raise() does not bring the window on screen, when iconized
if( frame->IsIconized() )
frame->Iconize( false );
frame->Raise();
}
void KICAD_MANAGER_FRAME::OnImportEagleFiles( wxCommandEvent& event )
{
// Close other windows.
if( !Kiway().PlayersClose( false ) )
return;
wxString title = _( "Import Eagle Project Files" );
int style = wxFD_OPEN | wxFD_FILE_MUST_EXIST;
wxString default_dir = GetMruPath();
ClearMsg();
wxFileDialog schdlg( this, title, default_dir, wxEmptyString,
EagleFilesWildcard(), style );
if( schdlg.ShowModal() == wxID_CANCEL )
return;
wxFileName sch( schdlg.GetPath() );
sch.SetExt( SchematicFileExtension );
wxFileName pro = sch;
pro.SetExt( ProjectFileExtension );
wxString protitle = _( "KiCad Project Destination" );
// Don't use wxFileDialog here. On GTK builds, the default path is returned unless a
// file is actually selected.
wxDirDialog prodlg( this, protitle, pro.GetPath(), wxDD_DEFAULT_STYLE | wxDD_DIR_MUST_EXIST );
if( prodlg.ShowModal() == wxID_CANCEL )
return;
pro.SetPath( prodlg.GetPath() );
// Check if the project directory is empty
wxDir directory( pro.GetPath() );
if( directory.HasFiles() )
{
wxString msg = _( "The selected directory is not empty. We recommend you "
"create projects in their own clean directory.\n\nDo you "
"want to create a new empty directory for the project?" );
KIDIALOG dlg( this, msg, _( "Confirmation" ), wxYES_NO | wxICON_WARNING );
dlg.DoNotShowCheckbox( __FILE__, __LINE__ );
if( dlg.ShowModal() == wxID_YES )
{
// Append a new directory with the same name of the project file
// and try to create it
pro.AppendDir( pro.GetName() );
if( !wxMkdir( pro.GetPath() ) )
// There was a problem, undo
pro.RemoveLastDir();
}
}
wxFileName pcb( sch );
pro.SetExt( ProjectFileExtension ); // enforce extension
pcb.SetExt( LegacyPcbFileExtension ); // enforce extension
if( !pro.IsAbsolute() )
pro.MakeAbsolute();
SetProjectFileName( pro.GetFullPath() );
wxString prj_filename = GetProjectFileName();
if( sch.FileExists() )
{
KIWAY_PLAYER* schframe = Kiway().Player( FRAME_SCH, false );
if( !schframe )
{
try // SCH frame was not available, try to start it
{
schframe = Kiway().Player( FRAME_SCH, true );
}
catch( const IO_ERROR& err )
{
wxMessageBox( _( "Eeschema failed to load:\n" ) + err.What(),
_( "KiCad Error" ), wxOK | wxICON_ERROR, this );
return;
}
}
std::string packet = StrPrintf( "%d\n%s", SCH_IO_MGR::SCH_EAGLE,
TO_UTF8( sch.GetFullPath() ) );
schframe->Kiway().ExpressMail( FRAME_SCH, MAIL_IMPORT_FILE, packet, this );
if( !schframe->IsShown() ) // the frame exists, (created by the dialog field editor)
// but no project loaded.
{
schframe->Show( true );
}
if( schframe->IsIconized() )
schframe->Iconize( false );
schframe->Raise();
}
if( pcb.FileExists() )
{
KIWAY_PLAYER* pcbframe = Kiway().Player( FRAME_PCB, false );
if( !pcbframe )
{
try // PCB frame was not available, try to start it
{
pcbframe = Kiway().Player( FRAME_PCB, true );
}
catch( const IO_ERROR& err )
{
wxMessageBox( _( "Pcbnew failed to load:\n" ) + err.What(), _( "KiCad Error" ),
wxOK | wxICON_ERROR, this );
return;
}
}
// a pcb frame can be already existing, but not yet used.
// this is the case when running the footprint editor, or the footprint viewer first
// if the frame is not visible, the board is not yet loaded
if( !pcbframe->IsVisible() )
{
pcbframe->Show( true );
}
std::string packet = StrPrintf( "%d\n%s", IO_MGR::EAGLE,
TO_UTF8( pcb.GetFullPath() ) );
pcbframe->Kiway().ExpressMail( FRAME_PCB, MAIL_IMPORT_FILE, packet, this );
// On Windows, Raise() does not bring the window on screen, when iconized
if( pcbframe->IsIconized() )
pcbframe->Iconize( false );
pcbframe->Raise();
}
ReCreateTreePrj();
m_active_project = true;
}
bool PGM_SINGLE_TOP::OnPgmInit( wxApp* aWxApp )
{
// first thing: set m_wx_app
m_wx_app = aWxApp;
wxString absoluteArgv0 = wxStandardPaths::Get().GetExecutablePath();
if( !wxIsAbsolutePath( absoluteArgv0 ) )
{
wxLogError( wxT( "No meaningful argv[0]" ) );
return false;
}
if( !initPgm() )
return false;
#if !defined(BUILD_KIWAY_DLL)
// Get the getter, it is statically linked into this binary image.
KIFACE_GETTER_FUNC* getter = &KIFACE_GETTER;
int kiface_version;
// Get the KIFACE.
KIFACE* kiface = getter( &kiface_version, KIFACE_VERSION, this );
// Trick the KIWAY into thinking it loaded a KIFACE, by recording the KIFACE
// in the KIWAY. It needs to be there for KIWAY::OnKiwayEnd() anyways.
Kiway.set_kiface( KIWAY::KifaceType( TOP_FRAME ), kiface );
#endif
// Use KIWAY to create a top window, which registers its existence also.
// "TOP_FRAME" is a macro that is passed on compiler command line from CMake,
// and is one of the types in FRAME_T.
KIWAY_PLAYER* frame = Kiway.Player( TOP_FRAME, true );
Kiway.SetTop( frame );
App().SetTopWindow( frame ); // wxApp gets a face.
// Open project or file specified on the command line:
int argc = App().argc;
if( argc > 1 )
{
/*
gerbview handles multiple project data files, i.e. gerber files on
cmd line. Others currently do not, they handle only one. For common
code simplicity we simply pass all the arguments in however, each
program module can do with them what they want, ignore, complain
whatever. We don't establish policy here, as this is a multi-purpose
launcher.
*/
std::vector<wxString> argSet;
for( int i=1; i<argc; ++i )
{
argSet.push_back( App().argv[i] );
}
// special attention to the first argument: argv[1] (==argSet[0])
wxFileName argv1( argSet[0] );
if( argc == 2 )
{
#if defined(PGM_DATA_FILE_EXT)
// PGM_DATA_FILE_EXT, if present, may be different for each compile,
// it may come from CMake on the compiler command line, but often does not.
// This facillity is mostly useful for those program modules
// supporting a single argv[1].
if( !argv1.GetExt() )
argv1.SetExt( wxT( PGM_DATA_FILE_EXT ) );
#endif
argv1.MakeAbsolute();
argSet[0] = argv1.GetFullPath();
}
// Use the KIWAY_PLAYER::OpenProjectFiles() API function:
if( !frame->OpenProjectFiles( argSet ) )
{
// OpenProjectFiles() API asks that it report failure to the UI.
// Nothing further to say here.
// We've already initialized things at this point, but wx won't call OnExit if
// we fail out. Call our own cleanup routine here to ensure the relevant resources
// are freed at the right time (if they aren't, segfaults will occur).
OnPgmExit();
// Fail the process startup if the file could not be opened,
// although this is an optional choice, one that can be reversed
// also in the KIFACE specific OpenProjectFiles() return value.
return false;
}
}
frame->Show();
return true;
}