void KisColorSelector::drawRing(QPainter& painter, KisColorSelector::ColorRing& ring, const QRect& rect)
{
painter.setRenderHint(QPainter::Antialiasing, false);
painter.resetTransform();
painter.translate(rect.width()/2, rect.height()/2);
if (ring.pieced.size() > 1) {
painter.rotate(-ring.getShift().degrees());
painter.scale(rect.width()/2, rect.height()/2);
painter.setPen(Qt::NoPen);
QBrush brush(Qt::SolidPattern);
for(int i=0; i<ring.pieced.size(); ++i) {
float hue = float(i) / float(ring.pieced.size()) + ring.getShift().scaled(0.0f, 1.0f);
hue = (hue >= 1.0f) ? (hue - 1.0f) : hue;
hue = (hue < 0.0f) ? (hue + 1.0f) : hue;
KisColor color(hue, 1.0f, m_colorSpace);
color.setS(ring.saturation);
color.setX(getLight(m_light, hue, m_relativeLight));
brush.setColor(color.getQColor());
painter.fillPath(ring.pieced[i], brush);
}
}
else {
KisColor colors[7] = {
KisColor(Qt::red , m_colorSpace),
KisColor(Qt::yellow , m_colorSpace),
KisColor(Qt::green , m_colorSpace),
KisColor(Qt::cyan , m_colorSpace),
KisColor(Qt::blue , m_colorSpace),
KisColor(Qt::magenta, m_colorSpace),
KisColor(Qt::red , m_colorSpace)
};
QConicalGradient gradient(0, 0, 0);
for(int i=0; i<=6; ++i) {
qreal hue = float(i) / 6.0f;
colors[i].setS(ring.saturation);
colors[i].setX(getLight(m_light, hue, m_relativeLight));
gradient.setColorAt(hue, colors[i].getQColor());
}
painter.scale(rect.width()/2, rect.height()/2);
painter.fillPath(ring.pieced[0], QBrush(gradient));
}
painter.resetTransform();
}
void KisColorSelector::drawOutline(QPainter& painter, const QRect& rect)
{
painter.setRenderHint(QPainter::Antialiasing, true);
painter.resetTransform();
painter.translate(rect.x() + rect.width()/2, rect.y() + rect.height()/2);
painter.scale(rect.width()/2, rect.height()/2);
painter.setPen(QPen(QBrush(Qt::gray), 0.005));
if (getNumPieces() > 1) {
for(int i=0; i<getNumRings(); ++i) {
painter.resetTransform();
painter.translate(rect.x() + rect.width()/2, rect.y() + rect.height()/2);
painter.scale(rect.width()/2, rect.height()/2);
painter.rotate(-m_colorRings[i].getShift().degrees());
for(int j=0; j<m_colorRings[i].pieced.size(); ++j)
painter.drawPath(m_colorRings[i].pieced[j]);
}
if (m_selectedRing >= 0 && m_selectedPiece >= 0) {
painter.resetTransform();
painter.translate(rect.x() + rect.width()/2, rect.y() + rect.height()/2);
painter.rotate(-m_colorRings[m_selectedRing].getShift().degrees());
painter.scale(rect.width()/2, rect.height()/2);
painter.setPen(QPen(QBrush(Qt::red), 0.01));
painter.drawPath(m_colorRings[m_selectedRing].pieced[m_selectedPiece]);
}
}
else {
for(int i=0; i<getNumRings(); ++i) {
qreal rad = m_colorRings[i].outerRadius;
painter.drawEllipse(QRectF(-rad, -rad, rad*2.0, rad*2.0));
}
}
if (m_selectedRing >= 0) {
qreal iRad = m_colorRings[m_selectedRing].innerRadius;
qreal oRad = m_colorRings[m_selectedRing].outerRadius;
painter.setPen(QPen(QBrush(Qt::red), 0.005));
painter.drawEllipse(QRectF(-iRad, -iRad, iRad*2.0, iRad*2.0));
painter.drawEllipse(QRectF(-oRad, -oRad, oRad*2.0, oRad*2.0));
if (getNumPieces() <= 1) {
float c = std::cos(-m_selectedColor.getH() * PI2);
float s = std::sin(-m_selectedColor.getH() * PI2);
painter.drawLine(QPointF(c*iRad, s*iRad), QPointF(c*oRad, s*oRad));
}
}
}
void ImageBufferDataPrivateAccelerated::platformTransformColorSpace(const Vector<int>& lookUpTable)
{
QPainter* painter = paintDevice()->paintEngine()->painter();
QImage image = toQImage().convertToFormat(QImage::Format_ARGB32);
ASSERT(!image.isNull());
uchar* bits = image.bits();
const int bytesPerLine = image.bytesPerLine();
for (int y = 0; y < image.height(); ++y) {
quint32* scanLine = reinterpret_cast_ptr<quint32*>(bits + y * bytesPerLine);
for (int x = 0; x < image.width(); ++x) {
QRgb& pixel = scanLine[x];
pixel = qRgba(lookUpTable[qRed(pixel)],
lookUpTable[qGreen(pixel)],
lookUpTable[qBlue(pixel)],
qAlpha(pixel));
}
}
painter->save();
painter->resetTransform();
painter->setOpacity(1.0);
painter->setClipping(false);
painter->setCompositionMode(QPainter::CompositionMode_Source);
// Should coordinates be flipped?
painter->drawImage(QPoint(0,0), image);
painter->restore();
}
void DrawMana( QPainter& painter, int x, int y, int width, int height, int mana ) const {
// Draw mana
QPen origPen = painter.pen();
QPen pen( QColor( 0, 52, 113 ) );
pen.setCosmetic( true );
pen.setWidth( 1 );
painter.setPen( pen );
QBrush brush( QColor( 40, 119, 238 ) );
painter.setBrush( brush );
QTransform transform;
painter.translate( x + width * 0.5, y + height * 0.5 );
painter.scale( width * 0.8, height * 0.8 );
static const QPointF points[5] = {
QPointF( 0.0, -1.0 ),
QPointF( 1.0, -0.2 ),
QPointF( 0.6, 1.0 ),
QPointF( -0.6, 1.0 ),
QPointF( -1.0, -0.2 ),
};
painter.drawConvexPolygon( points, 5 );
painter.resetTransform();
painter.setPen( origPen );
painter.drawText( x, y, width, height, Qt::AlignCenter | Qt::AlignVCenter, QString::number( mana ) );
}
/**
* Calls virtual drawShape() method to draw the actial shape.
* Draws bounding rect and control points if the shape is selected.
*
* @param painter :: QPainter used for drawing.
*/
void Shape2D::draw(QPainter& painter) const
{
if (!m_visible) return;
painter.setPen(m_color);
this->drawShape(painter);
if (m_editing || m_selected)
{
QColor c(255, 255, 255, 100);
painter.setPen(c);
painter.drawRect(m_boundingRect.toQRectF());
size_t np = NCommonCP;
double rsize = 2;
int alpha = 100;
if (m_editing)
{
// if editing show all CP, make them bigger and opaque
np = getNControlPoints();
rsize = sizeCP;
alpha = 255;
}
for (size_t i = 0; i < np; ++i)
{
QPointF p = painter.transform().map(getControlPoint(i));
QRectF r(p - QPointF(rsize, rsize), p + QPointF(rsize, rsize));
painter.save();
painter.resetTransform();
QColor c(255, 255, 255, alpha);
painter.fillRect(r, c);
r.adjust(-1, -1, 0, 0);
painter.setPen(QColor(0, 0, 0, alpha));
painter.drawRect(r);
painter.restore();
}
}
}
void MaxFlowVisualizer::drawEdge(const Edge &edge, QPainter &painter) const {
QPen pen;
pen.setWidth(3);
// Ребро, которое считается "допустимым" по алгоритму, выделяем черным.
if (relabelToFrontAlgo.getVertexHeight(edge.getFirstVertexIndex())
== relabelToFrontAlgo.getVertexHeight(edge.getSecondVertexIndex()) + 1) {
pen.setColor(Qt::black);
}
else {
pen.setColor(Qt::gray);
}
if (edge.getFlow() != 0) {
pen.setColor(Qt::darkBlue);
}
// Если в последнем действии алгоритма произошло проталкивание по этому ребру,
// то выделим его красным.
if (lastAlgoAction.getType() == AlgoAction::ACTION_PUSH && lastAlgoAction.getEdgeInfo() == edge) {
pen.setColor(Qt::red);
}
painter.setPen(pen);
QPoint pointFrom(verteciesList[edge.getFirstVertexIndex()].getCenterCoordX(),
verteciesList[edge.getFirstVertexIndex()].getCenterCoordY());
QPoint pointTo(verteciesList[edge.getSecondVertexIndex()].getCenterCoordX(),
verteciesList[edge.getSecondVertexIndex()].getCenterCoordY());
double length = sqrt(pow(pointFrom.x() - pointTo.x(), 2)
+ pow(pointFrom.y() - pointTo.y(), 2));
long vertexRaduis = verteciesList[edge.getSecondVertexIndex()].getRadius();
QPoint offsetVector((pointFrom.x() - pointTo.x()) * vertexRaduis / length,
(pointFrom.y() - pointTo.y()) * vertexRaduis / length);
QPoint arrow((pointFrom.x() - pointTo.x()) * 20 / length,
(pointFrom.y() - pointTo.y()) * 20 / length);
// Рисование стрелки (самих маленьких боковых линий).
// Перенесем систему координат в точку конца ребра (ориенированного).
// Возьмем маленький отрезок ребра, и нарисуем его, повернув при этом систуму координат
// на +30 и -30 градусов соответственно относительно исходного ребра.
// Получилась стрелка ->
// После этого восстановим систему координат.
painter.setPen(pen);
painter.drawLine(pointFrom, pointTo);
painter.translate(pointTo.x(), pointTo.y());
// Еще нужно отступить от конца ребра на радиус вершины
// (т.к. ребро идет от центра к центру).
painter.translate(offsetVector.x(), offsetVector.y());
painter.rotate(30);
painter.drawLine(QPoint(0, 0), arrow);
painter.rotate(-60);
painter.drawLine(QPoint(0, 0), arrow);
painter.resetTransform();
// Выводим информацию о ребре (flow | capacity) по середине ребра.
if (state == ALGORITHM_RUN || (state == ALGORITHM_TERM && edge.flow != 0)) {
QPen penForEdgeInfo;
penForEdgeInfo.setColor(Qt::darkGreen);
painter.setPen(penForEdgeInfo);
std::string edgeInfo = "(" + std::to_string(edge.getFlow()) + " | " + std::to_string(edge.getCapacity()) + ")";
painter.drawText(pointFrom.x() + (pointTo.x() - pointFrom.x()) / 2,
pointFrom.y() + (pointTo.y() - pointFrom.y()) / 2,
edgeInfo.c_str());
}
}
void QSplineEdit::paintControlHandles(QPainter & pnt)
{
QBrush br(Qt::lightGray);
QPen pn(Qt::black);
pnt.setPen(pn);
pnt.setBrush(br);
QRectF square(-4,-4,8,8);
pnt.translate(toDrawSpace(0, m_startValue));
pnt.drawRect(square);
pnt.resetTransform();
pnt.translate(toDrawSpace(1, m_endValue));
pnt.drawRect(square);
pnt.resetTransform();
pnt.translate(toDrawSpace(m_startCvx, m_startCvy));
pnt.drawEllipse(square);
pnt.resetTransform();
pnt.translate(toDrawSpace(m_endCvx, m_endCvy));
pnt.drawEllipse(square);
}
void OGSprite::Paint(QPainter& p, const QRectF& a_target)
{
if (!m_visible)
return;
p.setOpacity(m_alpha);
p.resetTransform();
if (GetAngle() != 0)
p.rotate(GetAngle());
m_source->Render(p, a_target, m_clipRect);
}
void PHISurfaceEffect::draw( QPainter *painter )
{
/*
QPoint offset;
QPixmap pixmap;
if ( sourceIsPixmap() ) {
// No point in drawing in device coordinates (pixmap will be scaled anyways).
pixmap=sourcePixmap( Qt::LogicalCoordinates, &offset );
} else {
// Draw pixmap in device coordinates to avoid pixmap scaling;
pixmap=sourcePixmap( Qt::DeviceCoordinates, &offset );
painter->setWorldTransform( QTransform() );
}
QImage img=pixmap.toImage();
img=PHI::getSurfacedImage( img, _yOff, _size );
painter->drawImage( offset, img );
*/
QRectF brect=sourceBoundingRect( Qt::LogicalCoordinates );
QImage img( static_cast<int>(brect.width()+1), static_cast<int>(brect.height()+_size+_yOff),
QImage::Format_ARGB32_Premultiplied );
QPainter pixPainter;
pixPainter.begin( &img );
pixPainter.setRenderHints( painter->renderHints() );
pixPainter.setCompositionMode( QPainter::CompositionMode_Clear );
pixPainter.fillRect( 0., 0., brect.width()+1., brect.height()+_size+_yOff+1, Qt::transparent );
pixPainter.setCompositionMode( QPainter::CompositionMode_SourceOver );
drawSource( &pixPainter );
QTransform t;
t.rotate( 180., Qt::XAxis );
t.translate( 0., (-brect.height()*2.)-_yOff+1. );
pixPainter.setTransform( t );
drawSource( &pixPainter );
pixPainter.resetTransform();
pixPainter.translate( 0., brect.height()+_yOff );
QLinearGradient gradient( 0., 0., 0., 1.0 );
gradient.setColorAt( 0., QColor( 0, 0, 0, 220 ) );
gradient.setColorAt( 0.78, QColor( 0, 0, 0, 30 ) );
gradient.setColorAt( 1., Qt::transparent );
gradient.setCoordinateMode( QGradient::ObjectBoundingMode );
pixPainter.setCompositionMode( QPainter::CompositionMode_DestinationIn );
pixPainter.fillRect( 0., 0., brect.width()+1, _size, gradient );
pixPainter.end();
painter->drawImage( 0, 0, img );
}
void Hruler::drawMarker(QPainter& p)
{
QPolygon cr;
#ifdef OPTION_SMOOTH_MARKERS
// draw new marker to pixmap
static const int SCALE = 16;
static const QColor BACKGROUND(255, 255, 255);
static QPixmap pix( 4*SCALE, 16*SCALE );
static bool initpix = true;
if (initpix) {
initpix = false;
QPainter pp( &pix );
pp.setBrush( BACKGROUND );
pp.drawRect( 0, 0, 4*SCALE, 16*SCALE );
pp.setPen(Qt::red);
pp.setBrush(Qt::red);
cr.setPoints(3, 2*SCALE, 16*SCALE, 4*SCALE, 0, 0, 0);
pp.drawPolygon(cr);
}
// draw pixmap
p.save();
p.translate(-m_view->contentsX(), 0);
p.scale(1.0/SCALE, 1.0/(SCALE+1));
p.drawPixmap((where-2)*SCALE, 1, pix);
p.restore();
// restore marks
p.setBrush(Qt::black);
p.setPen(Qt::black);
p.setFont(font());
double sc = m_view->getScale();
double cc = width() / sc;
double firstMark = ceil(offs / iter) * iter - offs;
while (firstMark < cc)
{
p.drawLine(qRound(firstMark * sc), 10, qRound(firstMark * sc), 16);
firstMark += iter;
}
#else
// draw slim marker
p.resetTransform();
p.translate(-m_view->contentsX(), 0);
p.setPen(Qt::red);
p.setBrush(Qt::red);
cr.setPoints(5, whereToDraw, 5, whereToDraw, 16, whereToDraw, 5, whereToDraw+2, 0, whereToDraw-2, 0);
p.drawPolygon(cr);
#endif
}
void GraphicsContext::endTransparencyLayer()
{
if (paintingDisabled())
return;
TransparencyLayer *layer = m_data->layers.pop();
layer->painter.end();
QPainter *p = m_data->p();
p->save();
p->resetTransform();
p->setOpacity(layer->opacity);
p->drawPixmap(layer->offset, layer->pixmap);
p->restore();
delete layer;
}
void Shape2D::draw(QPainter& painter) const
{
painter.setPen(m_color);
this->drawShape(painter);
if (m_editing)
{
QColor c(255,255,255,100);
painter.setPen(c);
painter.setCompositionMode(QPainter::CompositionMode_Plus);
painter.drawRect(m_boundingRect.toQRectF());
for(size_t i = 0; i < getNControlPoints(); ++i)
{
QPointF p = painter.transform().map(getControlPoint(i));
QRectF r(p - QPointF(sizeCP,sizeCP),p + QPointF(sizeCP,sizeCP));
painter.save();
painter.resetTransform();
painter.fillRect(r,c);
painter.restore();
}
}
}
///write a polygon on a PNG file, format of the polygon is vector of vector of contours...nested contours are holes
///takes the name of the image in input, the set of polygons, the set of per polygons transformation,
///the label to be written and the global parameter for drawing style
void PolyDumper::dumpPolySetPNG(const char * imageName,
vector< vector< vector<Point2f> > > &polyVecVec,
vector<Similarity2f> &trVec,
vector<string> &labelVec,
PolyDumperParam &pp)
{
///SET THE FONT
assert(polyVecVec.size() == trVec.size());
int fontSize=ceil(std::max(pp.width,pp.height)/100.0);
QFont qf("courier",fontSize);
///SET THE DRAWING SIZE
QImage img(pp.width,pp.height,QImage::Format_RGB32);
img.fill(vcg::ColorConverter::ToQColor( pp.backgroundColor).rgb());
///SETUP OF DRAWING PROCEDURE
QPainter painter;
painter.begin(&img);
QBrush bb;
if (pp.fill)
bb.setStyle(Qt::SolidPattern);
QPen qp;
qp.setWidthF(0);
for(size_t i=0;i<polyVecVec.size();++i)
{
///SET THE CURRENT TRANSFORMATION
painter.resetTransform();
painter.translate(trVec[i].tra[0],trVec[i].tra[1]);
painter.rotate(math::ToDeg(trVec[i].rotRad));
painter.scale(trVec[i].sca,trVec[i].sca);
QPainterPath QPP;
for(size_t jj=0;jj<polyVecVec[i].size();++jj)
{
QVector<QPointF> ppQ;
for(size_t j=0;j<polyVecVec[i][jj].size();++j)
{
Point2f pp=polyVecVec[i][jj][j];
ppQ.push_back(QPointF(pp[0],pp[1]));
}
ppQ.push_back(QPointF(polyVecVec[i][jj][0][0],polyVecVec[i][jj][0][1]));
QPP.addPolygon(QPolygonF(ppQ));
}
///FIND THE BARYCENTER
int radius;
Point2f bc;
bc=GetIncenter(polyVecVec[i],trVec[i],radius,100);
if (pp.randomColor)
bb.setColor(vcg::ColorConverter::ToQColor(Color4b::Scatter(polyVecVec.size(),i)));
else
bb.setColor(vcg::ColorConverter::ToQColor(pp.FillColor));
painter.setBrush(bb);
painter.setPen(qp);
painter.drawPath(QPP);
///DRAW THE TEXT
painter.setFont(qf);
painter.resetTransform();
painter.translate(trVec[i].tra[0],trVec[i].tra[1]);
painter.drawText(bc[0]-radius,bc[1]-radius,radius*2,radius*2,Qt::AlignHCenter|Qt::AlignCenter,QString(labelVec[i].c_str()));
}
painter.end();
img.save(imageName);
}
void NaZStackWidget::paintIntensityNumerals(QPainter& painter)
{
if (cur_z < 0) return;
if (! zSliceColors) return;
ZSliceColors::Reader zReader(*zSliceColors);
if (! zReader.hasReadLock()) return;
const QImage * displayImage = zReader.getImage();
if (! displayImage) return;
if (! volumeData) return;
NaVolumeData::Reader volumeReader(*volumeData);
if (! volumeReader.hasReadLock()) return;
const Image4DProxy<My4DImage>& imgProxy = volumeReader.getOriginalImageProxy();
// qDebug() << "numerals";
QPointF v_img_upleft = X_img_view * painter.viewport().topLeft();
QPointF v_img_downright = X_img_view * painter.viewport().bottomRight();
// qDebug() << v_img_upleft;
// qDebug() << v_img_downright;
// clear transform for text rendering, otherwise font size is harder to manage
painter.resetTransform();
QFont font = painter.font();
float scale = defaultScale * cameraModel.scale();
font.setPixelSize(scale/4.0);
font.setStyleStrategy(QFont::NoAntialias); // text rendering can be slow
painter.setFont(font);
// qDebug() << "nColumns = " << mipImage->originalData.nColumns();
// qDebug() << "nRows = " << mipImage->originalData.nRows();
// Iterate over only the image pixels that are visible
int nC = imgProxy.sc;
float lineHeight = scale / (nC + 1.0);
for (int x = int(v_img_upleft.x() - 0.5); x <= int(v_img_downright.x() + 0.5); ++x) {
// qDebug() << "x = " << x;
if (x < 0)
continue;
if (x >= displayImage->width())
continue;
for (int y = int(v_img_upleft.y() - 0.5); y <= int(v_img_downright.y() + 0.5); ++y) {
// qDebug() << "y = " << y;
if (y < 0)
continue;
if (y >= displayImage->height())
continue;
// Transform image pixel coordinates back to viewport coordinates
QPointF v = X_view_img * QPointF(x, y);
// qDebug() << x << ", " << y << "; " << v.x() << ", " << v.y();
// Print original data intensity, not displayed intensity
// But choose font color based on displayed intensity.
unsigned int red = qRed(displayImage->pixel(x, y));
unsigned int green = qGreen(displayImage->pixel(x, y));
unsigned int blue = qBlue(displayImage->pixel(x, y));
// human color perception is important here
float displayIntensity = 0.30 * red + 0.58 * green + 0.12 * blue;
if (displayIntensity < 128)
painter.setPen(Qt::white);
else
painter.setPen(Qt::black);
// Write a neat little column of numbers inside each pixel
for (int c = 0; c < nC; ++c) {
double val = imgProxy.value_at(x, y, cur_z, c);
painter.drawText(QRectF(v.x(), v.y() + (c + 0.5) * lineHeight, scale, lineHeight),
Qt::AlignHCenter | Qt::AlignVCenter,
QString("%1").arg(val));
}
}
}
// restore coordinate system
transformPainterToCurrentCamera(painter);
}
void PaintMethods::paintDebugDrawing(QPainter& painter, const DebugDrawing& debugDrawing, const QTransform& baseTrans)
{
static QBrush brush(Qt::SolidPattern);
static QBrush noBrush(Qt::NoBrush);
static QPen pen;
static QPen noPen(Qt::NoPen);
for(const DebugDrawing::Element* e = debugDrawing.getFirst(); e; e = debugDrawing.getNext(e))
switch(e->type)
{
case DebugDrawing::Element::POLYGON:
{
const DebugDrawing::Polygon& element = *(const DebugDrawing::Polygon*) e;
// select brush
if(element.fillStyle == Drawings::bs_solid)
{
brush.setColor(QColor(element.fillColor.r, element.fillColor.g, element.fillColor.b, element.fillColor.a));
painter.setBrush(brush);
}
else
painter.setBrush(noBrush);
// select pen
if(element.penStyle != Drawings::ps_null)
{
pen.setColor(QColor(element.penColor.r, element.penColor.g, element.penColor.b, element.penColor.a));
// A line width of zero indicates a cosmetic pen. This means that the pen width is always drawn one pixel wide, independent of the transformation set on the painter.
pen.setWidth(element.width);
switch(element.penStyle)
{
case Drawings::ps_dash:
pen.setStyle(Qt::DashLine);
break;
case Drawings::ps_dot:
pen.setStyle(Qt::DotLine);
break;
case Drawings::ps_solid:
default:
pen.setStyle(Qt::SolidLine);
}
painter.setPen(pen);
}
else
painter.setPen(noPen);
// copy vector2 to QPoints
static QPoint points[16];
for(int n = element.nCount - 1; n >= 0 ; --n)
points[n] = QPoint(element.points[n].x, element.points[n].y);
painter.drawPolygon(points, element.nCount);
break;
}
case DebugDrawing::Element::GRID_RGBA:
{
const DebugDrawing::GridRGBA& element = *(const DebugDrawing::GridRGBA*) e;
const int totalWidth(element.cellsX * element.cellSize);
const int totalHeight(element.cellsY * element.cellSize);
for(int y = 0; y < element.cellsY; ++y)
{
for(int x = 0; x < element.cellsX; ++x)
{
int startX(x * element.cellSize - totalWidth / 2);
int startY(y * element.cellSize - totalHeight / 2);
int c(y * element.cellsX + x);
brush.setColor(QColor(element.cells[c].r, element.cells[c].g,
element.cells[c].b, element.cells[c].a));
pen.setColor(QColor(element.cells[c].r, element.cells[c].g,
element.cells[c].b, element.cells[c].a));
pen.setWidth(1);
painter.setBrush(brush);
painter.setPen(pen);
painter.drawRect(startX, startY, element.cellSize - 1, element.cellSize - 1);
}
}
break;
}
case DebugDrawing::Element::GRID_MONO:
{
const DebugDrawing::GridMono& element = *(const DebugDrawing::GridMono*) e;
const int totalWidth(element.cellsX * element.cellSize);
const int totalHeight(element.cellsY * element.cellSize);
for(int y = 0; y < element.cellsY; ++y)
{
for(int x = 0; x < element.cellsX; ++x)
{
int startX(x * element.cellSize - totalWidth / 2);
int startY(y * element.cellSize - totalHeight / 2);
int c(y * element.cellsX + x);
ColorRGBA col(element.baseColor * (1.0f - (static_cast<float>(element.cells[c]) / 255.0)));
brush.setColor(QColor(col.r, col.g, col.b, element.baseColor.a));
pen.setColor(QColor(col.r, col.g, col.b, element.baseColor.a));
pen.setWidth(1);
painter.setBrush(brush);
painter.setPen(pen);
painter.drawRect(startX, startY, element.cellSize - 1, element.cellSize - 1);
}
}
break;
}
case DebugDrawing::Element::ELLIPSE:
{
const DebugDrawing::Ellipse& element = *(const DebugDrawing::Ellipse*) e;
// select brush
if(element.fillStyle == Drawings::bs_solid)
{
brush.setColor(QColor(element.fillColor.r, element.fillColor.g, element.fillColor.b, element.fillColor.a));
painter.setBrush(brush);
}
else
painter.setBrush(noBrush);
// select pen
if(element.penStyle != Drawings::ps_null)
{
pen.setColor(QColor(element.penColor.r, element.penColor.g, element.penColor.b, element.penColor.a));
// A line width of zero indicates a cosmetic pen. This means that the pen width is always drawn one pixel wide, independent of the transformation set on the painter.
pen.setWidth(element.width);
switch(element.penStyle)
{
case Drawings::ps_dash:
pen.setStyle(Qt::DashLine);
break;
case Drawings::ps_dot:
pen.setStyle(Qt::DotLine);
break;
case Drawings::ps_solid:
default:
pen.setStyle(Qt::SolidLine);
}
painter.setPen(pen);
}
else
painter.setPen(noPen);
if(element.rotation != 0.0f)
{
QTransform trans(painter.transform());
QTransform transBack(painter.transform());
trans.translate(qreal(element.x), qreal(element.y));
trans.rotateRadians(qreal(element.rotation));
painter.setTransform(trans);
painter.drawEllipse(-element.radiusX, -element.radiusY, 2 * element.radiusX, 2 * element.radiusY);
painter.setTransform(transBack);
}
else
{
painter.drawEllipse(element.x - element.radiusX, element.y - element.radiusY, 2 * element.radiusX, 2 * element.radiusY);
}
break;
}
case DebugDrawing::Element::LINE:
{
const DebugDrawing::Line& element = *(const DebugDrawing::Line*) e;
if(element.penStyle != Drawings::ps_null)
{
pen.setColor(QColor(element.penColor.r, element.penColor.g, element.penColor.b, element.penColor.a));
// A line width of zero indicates a cosmetic pen. This means that the pen width is always drawn one pixel wide, independent of the transformation set on the painter.
pen.setWidth(element.width);
switch(element.penStyle)
{
case Drawings::ps_dash:
pen.setStyle(Qt::DashLine);
break;
case Drawings::ps_dot:
pen.setStyle(Qt::DotLine);
break;
case Drawings::ps_solid:
default:
pen.setStyle(Qt::SolidLine);
}
painter.setPen(pen);
painter.drawLine(element.xStart, element.yStart, element.xEnd, element.yEnd);
}
break;
}
case DebugDrawing::Element::ORIGIN:
{
const DebugDrawing::Origin& element = *(const DebugDrawing::Origin*) e;
QTransform trans(baseTrans);
trans.translate(qreal(element.x), qreal(element.y));
trans.rotateRadians(qreal(element.angle));
painter.setTransform(trans);
break;
}
case DebugDrawing::Element::TEXT:
{
const DebugDrawing::Text& element = *(const DebugDrawing::Text*) e;
pen.setColor(QColor(element.penColor.r, element.penColor.g, element.penColor.b, element.penColor.a));
painter.setPen(pen);
QTransform trans(painter.transform());
const QPoint& pos(trans.map(QPoint(element.x, element.y)));
painter.resetTransform();
painter.drawText(pos, (const char*)(&element + 1));
painter.setTransform(trans);
break;
}
default:
break;
}
}
///write a polygon on a SVG file, format of the polygon is vector of vector of contours...nested contours are holes
///takes the name of the image in input, the set of polygons, the set of per polygons transformation,
///the label to be written and the global parameter for drawing style
void PolyDumper::dumpPolySetSVG(const char * imageName,
vector< vector< vector<Point2f> > > &polyVecVec,
vector<Similarity2f> &trVec,
vector< vector< string> > &labelVecVec,
vector<vector<Point2f> > &labelPosVecVec,
vector<vector<float> >&labelRadVecVec,
PolyDumperParam &pp)
{
assert(polyVecVec.size() == trVec.size());
///SET THE FONT
int fontSize;
if(pp.fontSize==0) fontSize=ceil(std::max(pp.width,pp.height)/200.0);
else fontSize=pp.fontSize;
QFont qf("courier",fontSize);
QSvgGenerator svg;
svg.setFileName(imageName);
///SET THE DRAWING SIZE
svg.setSize(QSize(pp.width,pp.height));
svg.setViewBox(QRect(0, 0, pp.width,pp.height));
svg.setResolution(int(pp.dpi));//
///SETUP OF DRAWING PROCEDURE
QPainter painter;
painter.begin(&svg);
QBrush bb;
if (pp.fill)
bb.setStyle(Qt::SolidPattern);
QPen qp;
///SET THE GLOBAL SCALING FACTOR
float Scalesvg=1.f/(float)trVec[0].sca;
qp.setWidthF(Scalesvg);
for(size_t i=0;i<polyVecVec.size();++i)
{
///SET THE CURRENT TRANSFORMATION
painter.resetTransform();
painter.translate(trVec[i].tra[0],trVec[i].tra[1]);
painter.rotate(math::ToDeg(trVec[i].rotRad));
painter.scale(trVec[i].sca,trVec[i].sca);
QPainterPath QPP;
for(size_t jj=0;jj<polyVecVec[i].size();++jj)
{
QVector<QPointF> ppQ;
for(size_t j=0;j<polyVecVec[i][jj].size();++j)
{
Point2f pp=polyVecVec[i][jj][j];
ppQ.push_back(QPointF(pp[0],pp[1]));
}
ppQ.push_back(QPointF(polyVecVec[i][jj][0][0],polyVecVec[i][jj][0][1]));
QPP.addPolygon(QPolygonF(ppQ));
}
///FIND THE INCENTER
if (pp.randomColor)
bb.setColor(vcg::ColorConverter::ToQColor(Color4b::Scatter(polyVecVec.size(),i)));
else
bb.setColor(vcg::ColorConverter::ToQColor(pp.FillColor));
///DRAW THE POLYGON
painter.setBrush(bb);
painter.setPen(qp);
painter.drawPath(QPP);
///DRAW THE TEXT
painter.setFont(qf);
float radius;
int radiusInt;
Point2f bc;
// if we do not have labelPos use the old method of empty disk.
if(labelPosVecVec.empty()) bc=GetIncenter(polyVecVec[i],trVec[i],radiusInt);
radius = radiusInt;
for(size_t labelInd=0;labelInd<labelVecVec[i].size();++labelInd)
{
if(!labelPosVecVec.empty())
{
bc= labelPosVecVec[i][labelInd];
bc.Rotate(trVec[i].rotRad);
bc *= trVec[i].sca;
radius=labelRadVecVec[i][labelInd];
radius *= trVec[i].sca;
}
painter.resetTransform();
painter.translate(trVec[i].tra[0],trVec[i].tra[1]);
painter.drawText(bc[0]-radius,bc[1]-radius,radius*2,radius*2,Qt::AlignHCenter|Qt::AlignCenter,QString(labelVecVec[i][labelInd].c_str()));
}
}
painter.end();
}
///this class draw a black mask fora given polygon, cenetered and scaled to fit with
///the image size, it return the transformation to tranform back the polygon to 2D space
void PolyDumper::DrawPolygonMask(const vector< vector<Point2f> > &polyVec,
QImage &img,
Similarity2f &ret,
const Similarity2f &trans)
{
///RASTERIZE THE POLYGON
QPainter painter;
painter.begin(&img);
QBrush bb;
bb.setStyle(Qt::SolidPattern);
int resolution=img.width();
QPen qp;
qp.setWidthF(0);
///find the BB
vcg::Box2f bbox;
for(size_t i=0;i<polyVec.size();++i)
for(size_t j=0;j<polyVec[i].size();++j)
{
Point2f pp=polyVec[i][j];
pp.Rotate(trans.rotRad);
bbox.Add(pp);
}
vcg::Point2f pos=bbox.Center();
float scaleFact=(resolution/bbox.Diag());
///SET THE TRANSFORMATION TO CENTER WRT BBOX
painter.resetTransform();
painter.translate(resolution/2,resolution/2);
painter.rotate(math::ToDeg(trans.rotRad));
painter.scale(scaleFact,scaleFact);
painter.translate(-pos.V(0),-pos.V(1));
///SET TO RETURN BACK
ret.rotRad=0;
ret.sca=scaleFact;
ret.tra[0]=-pos.V(0)*scaleFact + resolution/2;
ret.tra[1]=-pos.V(1)*scaleFact + resolution/2;
///DRAW THE POLYGON
QPainterPath QPP;
for(size_t i=0;i<polyVec.size();++i)
{
QVector<QPointF> ppQ;
for(size_t j=0;j<polyVec[i].size();++j)
{
Point2f pp=polyVec[i][j];
//pp.Rotate(trans.rotRad);
ppQ.push_back(QPointF(pp[0],pp[1]));
}
ppQ.push_back(QPointF(polyVec[i][0][0],polyVec[i][0][1]));
QPP.addPolygon(QPolygonF(ppQ));
}
painter.setBrush(bb);
painter.setPen(qp);
painter.drawPath(QPP);
painter.end();
//img.save("test.png");
}
void MainWindow::renderBoardCompleteGame(std::vector<MoveHistoryEntry> history, QString outDir, bool renderOpenTiles, bool renderFrames, bool renderPlayers, bool renderNextTile, int playerCount)
{
//TODO correct backgrounds
QDir(outDir).mkpath(".");
jcz::TileFactory tileFactory(false);
TileImageFactory imgFactory(&tileFactory);
QImage image;
QPainter * painter = 0;
RandomNextTileProvider rntp;
HistoryProvider hp(&rntp, history, 0);
Game g(&hp, false);
for (int i = 0; i < playerCount; ++i)
g.addPlayer(&RandomPlayer::instance);
BoardGraphicsScene bgs(&tileFactory, &imgFactory);
bgs.setRenderOpenTiles(renderOpenTiles);
bgs.setRenderFrames(renderFrames);
bgs.setGame(&g);
g.addWatchingPlayer(&bgs);
g.newGame(Tile::BaseGame, &tileFactory, history, true);
bgs.clearSelection();
QRectF sceneRect = bgs.itemsBoundingRect();
int const spacing = 50;
int constexpr pivScale = 4;
QSize sceneSize = sceneRect.size().toSize();
QSize size = sceneSize;
if (renderPlayers)
{
QLabel remainingLabel(QString("%1 tiles left").arg(g.getTileCount() - 1));
remainingLabel.updateGeometry();
int nextTileType = g.getTile(hp.nextTile(&g))->tileType;
QSize pivSize;
{
PlayerInfoView piv(0, &g, &imgFactory);
piv.updateView();
if (renderNextTile)
piv.displayTile(g.getNextPlayer(), nextTileType);
piv.updateGeometry();
pivSize = piv.size() * pivScale;
pivSize.rheight() *= g.getPlayerCount();
QSize remSize = remainingLabel.sizeHint() * pivScale;
size.rwidth() += pivSize.width() + spacing;
size.rheight() = qMax(size.height(), pivSize.height() + spacing + remSize.height());
}
}
std::vector<MoveHistoryEntry> applyHistory;
for (int i = -1; i < (int)history.size(); ++i)
{
// oh well, this is ugly. If only there was a Game::step(MoveHistoryEntry)...
if (i >= 0)
applyHistory.push_back(history[i]);
g.newGame(Tile::BaseGame, &tileFactory, applyHistory, true);
delete painter;
image = QImage(size, QImage::Format_ARGB32);
image.fill(Qt::transparent);
painter = new QPainter(&image);
painter->setRenderHints(QPainter::Antialiasing | QPainter::TextAntialiasing | QPainter::SmoothPixmapTransform | QPainter::HighQualityAntialiasing);
QPoint offset(0, 0);
if (renderPlayers)
{
QLabel remainingLabel(QString("%1 tiles left").arg(g.getTileCount() - 1));
remainingLabel.updateGeometry();
int nextTileType = g.getTile(hp.nextTile(&g))->tileType;
QSize pivSize;
painter->scale(pivScale, pivScale);
for (uint p = 0; p < g.getPlayerCount(); ++p)
{
PlayerInfoView piv(p, &g, &imgFactory);
piv.updateView();
if (renderNextTile)
piv.displayTile(g.getNextPlayer(), nextTileType);
piv.updateGeometry();
piv.render(painter, offset);
offset.ry() += piv.size().height();
}
offset.setX(0);
offset.setY((pivSize.height() + spacing) / pivScale);
remainingLabel.render(painter, offset);
offset.setX(pivSize.width() + spacing);
offset.setY(0);
painter->resetTransform();
}
bgs.setSceneRect(sceneRect);
bgs.render(painter, QRectF(offset, size));
image.save(QString("%1/%2.png").arg(outDir).arg(i+1, 3, 10, QLatin1Char('0')));
}
delete painter;
}
void MainWindow::renderBoard(std::vector<MoveHistoryEntry> history, QString outFile, int removeLast, bool renderOpenTiles, bool renderFrames, bool renderPlayers, bool renderNextTile)
{
//TODO correct backgrounds
jcz::TileFactory tileFactory(false);
TileImageFactory imgFactory(&tileFactory);
QImage image;
QPainter * painter = 0;
RandomNextTileProvider rntp;
HistoryProvider hp(&rntp, history, history.size() - removeLast);
Game g(&hp, false);
g.addPlayer(&RandomPlayer::instance);
g.addPlayer(&RandomPlayer::instance);
BoardGraphicsScene bgs(&tileFactory, &imgFactory);
bgs.setRenderOpenTiles(renderOpenTiles);
bgs.setRenderFrames(renderFrames);
bgs.setGame(&g);
g.addWatchingPlayer(&bgs);
history.erase(history.end() - removeLast, history.end());
g.newGame(Tile::BaseGame, &tileFactory, history, true);
bgs.clearSelection();
bgs.setSceneRect(bgs.itemsBoundingRect());
int const spacing = 50;
int constexpr pivScale = 4;
QSize sceneSize = bgs.sceneRect().size().toSize();
QSize size = sceneSize;
QPoint offset(0, 0);
if (renderPlayers)
{
QLabel remainingLabel(QString("%1 tiles left").arg(g.getTileCount() - 1));
remainingLabel.updateGeometry();
int nextTileType = g.getTile(hp.nextTile(&g))->tileType;
QSize pivSize;
for (uint p = 0; p < g.getPlayerCount(); ++p)
{
PlayerInfoView piv(p, &g, &imgFactory);
piv.updateView();
if (renderNextTile)
piv.displayTile(g.getNextPlayer(), nextTileType);
piv.updateGeometry();
if (p == 0)
{
pivSize = piv.size() * pivScale;
pivSize.rheight() *= g.getPlayerCount();
QSize remSize = remainingLabel.sizeHint() * pivScale;
size.rwidth() += pivSize.width() + spacing;
size.rheight() = qMax(size.height(), pivSize.height() + spacing + remSize.height());
image = QImage(size, QImage::Format_ARGB32);
image.fill(Qt::transparent);
painter = new QPainter(&image);
painter->setRenderHints(QPainter::Antialiasing | QPainter::TextAntialiasing | QPainter::SmoothPixmapTransform | QPainter::HighQualityAntialiasing);
painter->scale(pivScale, pivScale);
}
piv.render(painter, offset);
offset.ry() += piv.size().height();
}
offset.setX(0);
offset.setY((pivSize.height() + spacing) / pivScale);
remainingLabel.render(painter, offset);
offset.setX(pivSize.width() + spacing);
offset.setY(0);
painter->resetTransform();
}
else
{
image = QImage(size, QImage::Format_ARGB32);
image.fill(Qt::transparent);
painter = new QPainter(&image);
painter->setRenderHints(QPainter::Antialiasing | QPainter::TextAntialiasing | QPainter::SmoothPixmapTransform | QPainter::HighQualityAntialiasing);
}
bgs.render(painter, QRectF(offset, size));
image.save(outFile);
delete painter;
}
void KisColorSelector::drawLightStrip(QPainter& painter, const QRect& rect)
{
bool isVertical = true;
qreal penSize = qreal(qMin(QWidget::width(), QWidget::height())) / 200.0;
KisColor color(m_selectedColor);
painter.resetTransform();
if (getNumLightPieces() > 1) {
painter.setRenderHint(QPainter::Antialiasing, true);
painter.setPen(QPen(QBrush(Qt::red), penSize));
QTransform matrix;
matrix.translate(rect.x(), rect.y());
matrix.scale(rect.width(), rect.height());
for(int i=0; i<getNumLightPieces(); ++i) {
float t1 = float(i) / float(getNumLightPieces());
float t2 = float(i+1) / float(getNumLightPieces());
float light = 1.0f - (float(i) / float(getNumLightPieces()-1));
float diff = t2 - t1;// + 0.001;
QRectF r = isVertical ? QRectF(0.0, t1, 1.0, diff) : QRect(t1, 0.0, diff, 1.0);
color.setX(getLight(light, color.getH(), m_relativeLight));
r = matrix.mapRect(r);
painter.fillRect(r, color.getQColor());
if (i == m_selectedLightPiece)
painter.drawRect(r);
}
}
else {
int size = isVertical ? rect.height() : rect.width();
painter.setRenderHint(QPainter::Antialiasing, false);
if (isVertical) {
for(int i=0; i<size; ++i) {
int y = rect.y() + i;
float light = 1.0f - (float(i) / float(size-1));
color.setX(getLight(light, color.getH(), m_relativeLight));
painter.setPen(color.getQColor());
painter.drawLine(rect.left(), y, rect.right(), y);
}
}
else {
for(int i=0; i<size; ++i) {
int x = rect.x() + i;
float light = 1.0f - (float(i) / float(size-1));
color.setX(getLight(light, color.getH(), m_relativeLight));
painter.setPen(color.getQColor());
painter.drawLine(x, rect.top(), x, rect.bottom());
}
}
painter.setRenderHint(QPainter::Antialiasing, true);
painter.setPen(QPen(QBrush(Qt::red), penSize));
float t = 1.0f - m_light;
if (isVertical) {
int y = rect.y() + int(size * t);
painter.drawLine(rect.left(), y, rect.right(), y);
}
else {
int x = rect.x() + int(size * t);
painter.drawLine(x, rect.top(), x, rect.bottom());
}
}
}
void QtOutline2Rasterizer::rasterize(RasterizedOutline2 &poly,
float scale,
int rast_i,
int rotationNum,
int cellSize)
{
float rotRad = M_PI*2.0f*float(rast_i) / float(rotationNum);
//get polygon's BB, rotated according to the input parameter
Box2f bb;
vector<Point2f> pointvec = poly.getPoints();
for(size_t i=0;i<pointvec.size();++i) {
Point2f pp=pointvec[i];
pp.Rotate(rotRad);
bb.Add(pp);
}
///CREATE ITS GRID. The grid has to be a multiple of CELLSIZE because this grid's cells have size CELLSIZE
//we'll make so that sizeX and sizeY are multiples of CELLSIZE:
//1) we round it to the next integer
//2) add the number which makes it a multiple of CELLSIZE (only if it's not multiple already)
int sizeX = (int)ceil(bb.DimX()*scale);
int sizeY = (int)ceil(bb.DimY()*scale);
if (sizeX % cellSize != 0) sizeX += (cellSize - ((int)ceil(bb.DimX()*scale) % cellSize));
if (sizeY % cellSize != 0) sizeY += (cellSize - ((int)ceil(bb.DimY()*scale) % cellSize));
//security measure: add a dummy column/row thus making the image bigger, and crop it afterwards
//(if it hasn't been filled with anything)
//this is due to the fact that if we have a rectangle which has bb 39.xxx wide, then it won't fit in a 40px wide QImage!! The right side will go outside of the image!! :/
sizeX+=cellSize;
sizeY+=cellSize;
QImage img(sizeX,sizeY,QImage::Format_RGB32);
QColor backgroundColor(Qt::transparent);
img.fill(backgroundColor);
///SETUP OF DRAWING PROCEDURE
QPainter painter;
painter.begin(&img);
QBrush br;
br.setStyle(Qt::SolidPattern);
QPen qp;
qp.setWidthF(0);
qp.setColor(Qt::yellow);
painter.setBrush(br);
painter.setPen(qp);
painter.resetTransform();
painter.translate(QPointF(-(bb.min.X()*scale) , -(bb.min.Y()*scale) ));
painter.rotate(math::ToDeg(rotRad));
painter.scale(scale,scale);
//create the polygon to print it
QVector<QPointF> points;
vector<Point2f> newpoints = poly.getPoints();
for (size_t i = 0; i < newpoints.size(); i++) {
points.push_back(QPointF(newpoints[i].X(), newpoints[i].Y()));
}
painter.drawPolygon(QPolygonF(points));
//CROPPING: it is enough to check for the (end - cellSize - 1)th row/col of pixels, if they're all black we can eliminate the last 8columns/rows of pixels
bool cropX = true;
bool cropY = true;
for (int j=0; j<img.height(); j++) {
const uchar* line = img.scanLine(j);
if (j == img.height() - (cellSize - 1) - 1 ) {
for (int x=0; x<img.width(); x++) {
if (((QRgb*)line)[x] != backgroundColor.rgb()) {
cropY = false;
break;
}
}
}
else {
if (((QRgb*)line)[img.width() - (cellSize - 1) - 1] != backgroundColor.rgb()) {
cropX = false;
break;
}
}
if (!cropY) break;
}
if (cropX || cropY) {
painter.end();
img = img.copy(0, 0, img.width() - cellSize * cropX, img.height() - cellSize * cropY);
painter.begin(&img);
painter.setBrush(br);
painter.setPen(qp);
}
//draw the poly for the second time, this time it is centered to the image
img.fill(backgroundColor);
painter.resetTransform();
painter.translate(QPointF(-(bb.min.X()*scale) + (img.width() - ceil(bb.DimX()*scale))/2.0, -(bb.min.Y()*scale) + (img.height() - ceil(bb.DimY()*scale))/2.0));
painter.rotate(math::ToDeg(rotRad));
painter.scale(scale,scale);
//create the polygon to print it
QVector<QPointF> points2;
vector<Point2f> newpoints2 = poly.getPoints();
for (size_t i = 0; i < newpoints2.size(); i++) {
points2.push_back(QPointF(newpoints2[i].X(), newpoints2[i].Y()));
}
painter.drawPolygon(QPolygonF(points2));
//create the first grid, which will then be rotated 3 times.
//we will reuse this grid to create the rasterizations corresponding to this one rotated by 90/180/270°
vector<vector<int> > tetrisGrid;
QRgb yellow = QColor(Qt::yellow).rgb();
int gridWidth = img.width() / cellSize;
int gridHeight = img.height() / cellSize;
int x = 0;
tetrisGrid.resize(gridHeight);
for (int k = 0; k < gridHeight; k++) {
tetrisGrid[k].resize(gridWidth, 0);
}
for (int y = 0; y < img.height(); y++) {
int gridY = y / cellSize;
const uchar* line = img.scanLine(y);
x = 0;
int gridX = 0;
while(x < img.width()) {
gridX = x/cellSize;
if (tetrisGrid[gridY][gridX] == 1) {
x+= cellSize - (x % cellSize); //align with the next x
continue;
}
if (((QRgb*)line)[x] == yellow) tetrisGrid[gridY][gridX] = 1;
++x;
}
}
//create the 4 rasterizations (one every 90°) using the discrete representation grid we've just created
int rotationOffset = rotationNum/4;
for (int j = 0; j < 4; j++) {
if (j != 0) {
tetrisGrid = rotateGridCWise(tetrisGrid);
}
//add the grid to the poly's vector of grids
poly.getGrids(rast_i + rotationOffset*j) = tetrisGrid;
//initializes bottom/left/deltaX/deltaY vectors of the poly, for the current rasterization
poly.initFromGrid(rast_i + rotationOffset*j);
}
painter.end();
}
