Exemple #1
0
    void SBTopHat::SBTopHatImpl::fillXValue(tmv::MatrixView<double> val,
                                            double x0, double dx, int izero,
                                            double y0, double dy, int jzero) const
    {
        dbg<<"SBTopHat fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<", izero = "<<izero<<std::endl;
        dbg<<"y = "<<y0<<" + j * "<<dy<<", jzero = "<<jzero<<std::endl;

        assert(val.stepi() == 1);
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<double,1,tmv::NonConj> It;

        val.setZero();
        // The columns to consider have -r0 <= y < r0
        // given that y = y0 + j dy
        double absdx = std::abs(dx);
        double absdy = std::abs(dy);
        int j1 = std::max(0, int(std::ceil(-_r0/absdy - y0/dy)));
        int j2 = std::min(n, int(std::ceil(_r0/absdy - y0/dy)));
        y0 += j1 * dy;
        for (int j=j1;j<j2;++j,y0+=dy) {
            double ysq = y0*y0;
            double xmax = std::sqrt(_r0sq - ysq);
            // Set to _norm all pixels with -xmax <= x < xmax
            // given that x = x0 + i dx.
            int i1 = std::max(0, int(std::ceil(-xmax/absdx - x0/dx)));
            int i2 = std::min(m, int(std::ceil(xmax/absdx - x0/dx)));
            if (i1 < i2)
                val.col(j,i1,i2).setAllTo(_norm);
        }
    }
Exemple #2
0
    void SBBox::SBBoxImpl::fillXValue(tmv::MatrixView<double> val,
                                      double x0, double dx, double dxy,
                                      double y0, double dy, double dyx) const
    {
        dbg<<"SBBox fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<" + j * "<<dxy<<std::endl;
        dbg<<"y = "<<y0<<" + i * "<<dyx<<" + j * "<<dy<<std::endl;
        assert(val.stepi() == 1);
        assert(val.canLinearize());
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<double,1,tmv::NonConj> It;

        It valit = val.linearView().begin();
        for (int j=0;j<n;++j,x0+=dxy,y0+=dy) {
            double x = x0;
            double y = y0;
            int i=0;
            // Use the fact that any slice through the box has only one segment that is non-zero.
            // So start with zeroes until in the box, then _norm, then more zeroes.
            for (;i<m && (std::abs(x)>_wo2 || std::abs(y)>_ho2); ++i,x+=dx,y+=dyx) *valit++ = 0.;
            for (;i<m && std::abs(x)<_wo2 && std::abs(y)<_ho2; ++i,x+=dx,y+=dyx) *valit++ = _norm;
            for (;i<m; ++i,x+=dx,y+=dyx) *valit++ = 0.;
        }
    }
Exemple #3
0
    void SBBox::SBBoxImpl::fillKValue(tmv::MatrixView<std::complex<double> > val,
                                      double kx0, double dkx, int izero,
                                      double ky0, double dky, int jzero) const
    {
        dbg<<"SBBox fillKValue\n";
        dbg<<"kx = "<<kx0<<" + i * "<<dkx<<", izero = "<<izero<<std::endl;
        dbg<<"ky = "<<ky0<<" + j * "<<dky<<", jzero = "<<jzero<<std::endl;
        if (izero != 0 || jzero != 0) {
            xdbg<<"Use Quadrant\n";
            fillKValueQuadrant(val,kx0,dkx,izero,ky0,dky,jzero);
        } else {
            xdbg<<"Non-Quadrant\n";
            assert(val.stepi() == 1);
            const int m = val.colsize();
            const int n = val.rowsize();
            typedef tmv::VIt<double,1,tmv::NonConj> It;

            kx0 *= _wo2pi;
            dkx *= _wo2pi;
            ky0 *= _ho2pi;
            dky *= _ho2pi;

            // The Box profile in Fourier space is separable:
            //    val(x,y) = _flux * sinc(x * _width/2pi) * sinc(y * _height/2pi)
            tmv::Vector<double> sinc_kx(m);
            It kxit = sinc_kx.begin();
            for (int i=0;i<m;++i,kx0+=dkx) *kxit++ = sinc(kx0);
            tmv::Vector<double> sinc_ky(n);
            It kyit = sinc_ky.begin();
            for (int j=0;j<n;++j,ky0+=dky) *kyit++ = sinc(ky0);

            val = _flux * sinc_kx ^ sinc_ky;
        }
    }
Exemple #4
0
    void SBMoffat::SBMoffatImpl::fillKValue(tmv::MatrixView<std::complex<double> > val,
                                            double kx0, double dkx, double dkxy,
                                            double ky0, double dky, double dkyx) const
    {
        dbg<<"SBMoffat fillKValue\n";
        dbg<<"kx = "<<kx0<<" + i * "<<dkx<<" + j * "<<dkxy<<std::endl;
        dbg<<"ky = "<<ky0<<" + i * "<<dkyx<<" + j * "<<dky<<std::endl;
        assert(val.stepi() == 1);
        assert(val.canLinearize());
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<std::complex<double>,1,tmv::NonConj> It;

        kx0 *= _rD;
        dkx *= _rD;
        dkxy *= _rD;
        ky0 *= _rD;
        dky *= _rD;
        dkyx *= _rD;

        It valit = val.linearView().begin();
        for (int j=0;j<n;++j,kx0+=dkxy,ky0+=dky) {
            double kx = kx0;
            double ky = ky0;
            for (int i=0;i<m;++i,kx+=dkx,ky+=dkyx) {
                double ksq = kx*kx + ky*ky;
                *valit++ = _knorm * (this->*_kV)(ksq);
            }
        }
    }
Exemple #5
0
    void SBTopHat::SBTopHatImpl::fillXValue(tmv::MatrixView<double> val,
                                            double x0, double dx, double dxy,
                                            double y0, double dy, double dyx) const
    {
        dbg<<"SBTopHat fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<" + j * "<<dxy<<std::endl;
        dbg<<"y = "<<y0<<" + i * "<<dyx<<" + j * "<<dy<<std::endl;
        assert(val.stepi() == 1);
        assert(val.canLinearize());
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<double,1,tmv::NonConj> It;

        val.setZero();
        It valit = val.linearView().begin();
        for (int j=0;j<n;++j,x0+=dxy,y0+=dy) {
            double x = x0;
            double y = y0;
            int i=0;
            // Use the fact that any slice through the circle has only one segment that is non-zero.
            // So start with zeroes until in the circle, then _norm, then more zeroes.
            // Note: this could be sped up somewhat using the same kind of calculation we did
            // for the non-sheared fillXValue (the one with izero, jzero), but I didn't
            // bother.  This is probably plenty fast enough for as often as the function is
            // called (i.e. almost never!)
            for (;i<m && (x*x+y*y > _r0sq); ++i,x+=dx,y+=dyx) ++valit;
            for (;i<m && (x*x+y*y < _r0sq); ++i,x+=dx,y+=dyx) *valit++ = _norm;
            for (;i<m; ++i,x+=dx,y+=dyx) ++valit;
        }
    }
Exemple #6
0
    void SBKolmogorov::SBKolmogorovImpl::fillKValue(tmv::MatrixView<std::complex<double> > val,
                                                    double kx0, double dkx, double dkxy,
                                                    double ky0, double dky, double dkyx) const
    {
        dbg<<"SBKolmogorov fillKValue\n";
        dbg<<"kx = "<<kx0<<" + i * "<<dkx<<" + j * "<<dkxy<<std::endl;
        dbg<<"ky = "<<ky0<<" + i * "<<dkyx<<" + j * "<<dky<<std::endl;
        assert(val.stepi() == 1);
        assert(val.canLinearize());
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<std::complex<double>,1,tmv::NonConj> It;

        kx0 *= _inv_k0;
        dkx *= _inv_k0;
        dkxy *= _inv_k0;
        ky0 *= _inv_k0;
        dky *= _inv_k0;
        dkyx *= _inv_k0;

        It valit = val.linearView().begin();
        for (int j=0;j<n;++j,kx0+=dkxy,ky0+=dky) {
            double kx = kx0;
            double ky = ky0;
            for (int i=0;i<m;++i,kx+=dkx,ky+=dkyx) *valit++ = _flux * _info->kValue(kx*kx+ky*ky);
        }
    }
Exemple #7
0
    void SBMoffat::SBMoffatImpl::fillXValue(tmv::MatrixView<double> val,
                                            double x0, double dx, int izero,
                                            double y0, double dy, int jzero) const
    {
        dbg<<"SBMoffat fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<", izero = "<<izero<<std::endl;
        dbg<<"y = "<<y0<<" + j * "<<dy<<", jzero = "<<jzero<<std::endl;
        if (izero != 0 || jzero != 0) {
            xdbg<<"Use Quadrant\n";
            fillXValueQuadrant(val,x0,dx,izero,y0,dy,jzero);
        } else {
            xdbg<<"Non-Quadrant\n";
            assert(val.stepi() == 1);
            const int m = val.colsize();
            const int n = val.rowsize();
            typedef tmv::VIt<double,1,tmv::NonConj> It;

            x0 *= _inv_rD;
            dx *= _inv_rD;
            y0 *= _inv_rD;
            dy *= _inv_rD;

            for (int j=0;j<n;++j,y0+=dy) {
                double x = x0;
                double ysq = y0*y0;
                It valit = val.col(j).begin();
                for (int i=0;i<m;++i,x+=dx) {
                    double rsq = x*x + ysq;
                    if (rsq > _maxRrD_sq) *valit++ = 0.;
                    else *valit++ = _norm / _pow_beta(1.+rsq, _beta);
                }
            }
        }
    }
Exemple #8
0
    void SBKolmogorov::SBKolmogorovImpl::fillKValue(tmv::MatrixView<std::complex<double> > val,
                                                    double kx0, double dkx, int izero,
                                                    double ky0, double dky, int jzero) const
    {
        dbg<<"SBKolmogorov fillKValue\n";
        dbg<<"kx = "<<kx0<<" + i * "<<dkx<<", izero = "<<izero<<std::endl;
        dbg<<"ky = "<<ky0<<" + j * "<<dky<<", jzero = "<<jzero<<std::endl;
        if (izero != 0 || jzero != 0) {
            xdbg<<"Use Quadrant\n";
            fillKValueQuadrant(val,kx0,dkx,izero,ky0,dky,jzero);
        } else {
            xdbg<<"Non-Quadrant\n";
            assert(val.stepi() == 1);
            const int m = val.colsize();
            const int n = val.rowsize();
            typedef tmv::VIt<std::complex<double>,1,tmv::NonConj> It;

            kx0 *= _inv_k0;
            dkx *= _inv_k0;
            ky0 *= _inv_k0;
            dky *= _inv_k0;

            for (int j=0;j<n;++j,ky0+=dky) {
                double kx = kx0;
                double kysq = ky0*ky0;
                It valit = val.col(j).begin();
                for (int i=0;i<m;++i,kx+=dkx) *valit++ = _flux * _info->kValue(kx*kx + kysq);
            }
        }
    }
Exemple #9
0
    void SBKolmogorov::SBKolmogorovImpl::fillXValue(tmv::MatrixView<double> val,
                                                    double x0, double dx, double dxy,
                                                    double y0, double dy, double dyx) const
    {
        dbg<<"SBKolmogorov fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<" + j * "<<dxy<<std::endl;
        dbg<<"y = "<<y0<<" + i * "<<dyx<<" + j * "<<dy<<std::endl;
        assert(val.stepi() == 1);
        assert(val.canLinearize());
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<double,1,tmv::NonConj> It;

        x0 *= _k0;
        dx *= _k0;
        dxy *= _k0;
        y0 *= _k0;
        dy *= _k0;
        dyx *= _k0;

        It valit = val.linearView().begin();
        for (int j=0;j<n;++j,x0+=dxy,y0+=dy) {
            double x = x0;
            double y = y0;
            for (int i=0;i<m;++i,x+=dx,y+=dyx) {
                double r = sqrt(x*x + y*y);
                *valit++ = _xnorm * _info->xValue(r);
            }
        }
    }
Exemple #10
0
    void SBGaussian::SBGaussianImpl::fillXValue(tmv::MatrixView<double> val,
                                                double x0, double dx, double dxy,
                                                double y0, double dy, double dyx) const
    {
        dbg<<"SBGaussian fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<" + j * "<<dxy<<std::endl;
        dbg<<"y = "<<y0<<" + i * "<<dyx<<" + j * "<<dy<<std::endl;
        assert(val.stepi() == 1);
        assert(val.canLinearize());
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<double,1,tmv::NonConj> It;

        x0 *= _inv_sigma;
        dx *= _inv_sigma;
        dxy *= _inv_sigma;
        y0 *= _inv_sigma;
        dy *= _inv_sigma;
        dyx *= _inv_sigma;

        It valit = val.linearView().begin();
        for (int j=0;j<n;++j,x0+=dxy,y0+=dy) {
            double x = x0;
            double y = y0;
            for (int i=0;i<m;++i,x+=dx,y+=dyx)
                *valit++ = _norm * std::exp( -0.5 * (x*x + y*y) );
        }
    }
Exemple #11
0
    void SBKolmogorov::SBKolmogorovImpl::fillXValue(tmv::MatrixView<double> val,
                                                    double x0, double dx, int izero,
                                                    double y0, double dy, int jzero) const
    {
        dbg<<"SBKolmogorov fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<", izero = "<<izero<<std::endl;
        dbg<<"y = "<<y0<<" + j * "<<dy<<", jzero = "<<jzero<<std::endl;
        if (izero != 0 || jzero != 0) {
            xdbg<<"Use Quadrant\n";
            fillXValueQuadrant(val,x0,dx,izero,y0,dy,jzero);
        } else {
            xdbg<<"Non-Quadrant\n";
            assert(val.stepi() == 1);
            const int m = val.colsize();
            const int n = val.rowsize();
            typedef tmv::VIt<double,1,tmv::NonConj> It;

            x0 *= _k0;
            dx *= _k0;
            y0 *= _k0;
            dy *= _k0;

            for (int j=0;j<n;++j,y0+=dy) {
                double x = x0;
                double ysq = y0*y0;
                It valit = val.col(j).begin();
                for (int i=0;i<m;++i,x+=dx) {
                    double r = sqrt(x*x + ysq);
                    *valit++ = _xnorm * _info->xValue(r);
                }
            }
        }
    }
Exemple #12
0
    void SBGaussian::SBGaussianImpl::fillKValue(tmv::MatrixView<std::complex<double> > val,
                                                double kx0, double dkx, int izero,
                                                double ky0, double dky, int jzero) const
    {
        dbg<<"SBGaussian fillKValue\n";
        dbg<<"kx = "<<kx0<<" + i * "<<dkx<<", izero = "<<izero<<std::endl;
        dbg<<"ky = "<<ky0<<" + j * "<<dky<<", jzero = "<<jzero<<std::endl;
        if (izero != 0 || jzero != 0) {
            xdbg<<"Use Quadrant\n";
            fillKValueQuadrant(val,kx0,dkx,izero,ky0,dky,jzero);
        } else {
            xdbg<<"Non-Quadrant\n";
            assert(val.stepi() == 1);
            const int m = val.colsize();
            const int n = val.rowsize();
            typedef tmv::VIt<double,1,tmv::NonConj> It;

            kx0 *= _sigma;
            dkx *= _sigma;
            ky0 *= _sigma;
            dky *= _sigma;

            tmv::Vector<double> gauss_kx(m);
            It kxit = gauss_kx.begin();
            for (int i=0;i<m;++i,kx0+=dkx) *kxit++ = exp(-0.5 * kx0*kx0);
            tmv::Vector<double> gauss_ky(n);
            It kyit = gauss_ky.begin();
            for (int j=0;j<n;++j,ky0+=dky) *kyit++ = exp(-0.5 * ky0*ky0);

            val = _flux * gauss_kx ^ gauss_ky;
        }
    }
Exemple #13
0
    void SBGaussian::SBGaussianImpl::fillXValue(tmv::MatrixView<double> val,
                                                double x0, double dx, int izero,
                                                double y0, double dy, int jzero) const
    {
        dbg<<"SBGaussian fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<", izero = "<<izero<<std::endl;
        dbg<<"y = "<<y0<<" + j * "<<dy<<", jzero = "<<jzero<<std::endl;
        if (izero != 0 || jzero != 0) {
            xdbg<<"Use Quadrant\n";
            fillXValueQuadrant(val,x0,dx,izero,y0,dy,jzero);
        } else {
            xdbg<<"Non-Quadrant\n";
            assert(val.stepi() == 1);
            const int m = val.colsize();
            const int n = val.rowsize();
            typedef tmv::VIt<double,1,tmv::NonConj> It;

            x0 *= _inv_sigma;
            dx *= _inv_sigma;
            y0 *= _inv_sigma;
            dy *= _inv_sigma;

            // The Gaussian profile is separable:
            //    val = _norm * exp(-0.5 * (x*x + y*y)
            //        = _norm * exp(-0.5 * x*x) * exp(-0.5 * y*y)
            tmv::Vector<double> gauss_x(m);
            It xit = gauss_x.begin();
            for (int i=0;i<m;++i,x0+=dx) *xit++ = exp(-0.5 * x0*x0);
            tmv::Vector<double> gauss_y(n);
            It yit = gauss_y.begin();
            for (int j=0;j<n;++j,y0+=dy) *yit++ = exp(-0.5 * y0*y0);

            val = _norm * gauss_x ^ gauss_y;
        }
    }
Exemple #14
0
    void SBMoffat::SBMoffatImpl::fillXValue(tmv::MatrixView<double> val,
                                            double x0, double dx, double dxy,
                                            double y0, double dy, double dyx) const
    {
        dbg<<"SBMoffat fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<" + j * "<<dxy<<std::endl;
        dbg<<"y = "<<y0<<" + i * "<<dyx<<" + j * "<<dy<<std::endl;
        assert(val.stepi() == 1);
        assert(val.canLinearize());
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<double,1,tmv::NonConj> It;

        x0 *= _inv_rD;
        dx *= _inv_rD;
        dxy *= _inv_rD;
        y0 *= _inv_rD;
        dy *= _inv_rD;
        dyx *= _inv_rD;

        It valit = val.linearView().begin();
        for (int j=0;j<n;++j,x0+=dxy,y0+=dy) {
            double x = x0;
            double y = y0;
            for (int i=0;i<m;++i,x+=dx,y+=dyx) {
                double rsq = x*x + y*y;
                if (rsq > _maxRrD_sq) *valit++ = 0.;
                else *valit++ = _norm / _pow_beta(1.+rsq, _beta);
            }
        }
    }
Exemple #15
0
 void SBShapelet::SBShapeletImpl::fillXValue(
     tmv::MatrixView<double> val,
     const tmv::Matrix<double>& x, const tmv::Matrix<double>& y) const
 {
     dbg<<"order = "<<_bvec.getOrder()<<", sigma = "<<_sigma<<std::endl;
     xdbg<<"fillXValue with bvec = "<<_bvec<<std::endl;
     assert(val.stepi() == 1);
     assert(val.canLinearize());
     const int m = val.colsize();
     const int n = val.rowsize();
     tmv::Matrix<double> psi(m*n,_bvec.size());
     LVector::basis(x.constLinearView(),y.constLinearView(),psi.view(),
                    _bvec.getOrder(),_sigma);
     val.linearView() = psi * _bvec.rVector();
 }
Exemple #16
0
 void SBShapelet::SBShapeletImpl::fillKValue(
     tmv::MatrixView<std::complex<double> > val,
     const tmv::Matrix<double>& kx, const tmv::Matrix<double>& ky) const
 {
     dbg<<"order = "<<_bvec.getOrder()<<", sigma = "<<_sigma<<std::endl;
     xdbg<<"fillKValue with bvec = "<<_bvec<<std::endl;
     assert(val.stepi() == 1);
     assert(val.canLinearize());
     const int m = val.colsize();
     const int n = val.rowsize();
     tmv::Matrix<std::complex<double> > psi_k(m*n,_bvec.size());
     LVector::kBasis(kx.constLinearView(),ky.constLinearView(),psi_k.view(),
                     _bvec.getOrder(),_sigma);
     // Note: the explicit cast to Vector<complex<double> > shouldn't be necessary.
     // But not doing so fails for Apple's default BLAS library.  It should be a pretty
     // minimal efficiency difference, so we always do the explicit cast to be safe.
     val.linearView() = psi_k * tmv::Vector<std::complex<double> >(_bvec.rVector());
 }
Exemple #17
0
    void SBExponential::SBExponentialImpl::fillKValue(tmv::MatrixView<std::complex<double> > val,
                                                      double kx0, double dkx, int izero,
                                                      double ky0, double dky, int jzero) const
    {
        dbg<<"SBExponential fillKValue\n";
        dbg<<"kx = "<<kx0<<" + i * "<<dkx<<", izero = "<<izero<<std::endl;
        dbg<<"ky = "<<ky0<<" + j * "<<dky<<", jzero = "<<jzero<<std::endl;
        if (izero != 0 || jzero != 0) {
            xdbg<<"Use Quadrant\n";
            fillKValueQuadrant(val,kx0,dkx,izero,ky0,dky,jzero);
        } else {
            xdbg<<"Non-Quadrant\n";
            assert(val.stepi() == 1);
            const int m = val.colsize();
            const int n = val.rowsize();
            typedef tmv::VIt<std::complex<double>,1,tmv::NonConj> It;

            kx0 *= _r0;
            dkx *= _r0;
            ky0 *= _r0;
            dky *= _r0;

            for (int j=0;j<n;++j,ky0+=dky) {
                double kx = kx0;
                double kysq = ky0*ky0;
                It valit = val.col(j).begin();
                for (int i=0;i<m;++i,kx+=dkx) {
                    double ksq = kx*kx + kysq;
                    if (ksq > _ksq_max) {
                        *valit++ = 0.;
                    } else if (ksq < _ksq_min) {
                        *valit++ = _flux * (1. - 1.5*ksq*(1. - 1.25*ksq));
                    } else {
                        double temp = 1. + ksq;
                        *valit++ =  _flux/(temp*sqrt(temp));
                    }
                }
            }
        }
    }
Exemple #18
0
    void SBExponential::SBExponentialImpl::fillKValue(tmv::MatrixView<std::complex<double> > val,
                                                      double kx0, double dkx, double dkxy,
                                                      double ky0, double dky, double dkyx) const
    {
        dbg<<"SBExponential fillKValue\n";
        dbg<<"kx = "<<kx0<<" + i * "<<dkx<<" + j * "<<dkxy<<std::endl;
        dbg<<"ky = "<<ky0<<" + i * "<<dkyx<<" + j * "<<dky<<std::endl;
        assert(val.stepi() == 1);
        assert(val.canLinearize());
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<std::complex<double>,1,tmv::NonConj> It;

        kx0 *= _r0;
        dkx *= _r0;
        dkxy *= _r0;
        ky0 *= _r0;
        dky *= _r0;
        dkyx *= _r0;

        It valit = val.linearView().begin();
        for (int j=0;j<n;++j,kx0+=dkxy,ky0+=dky) {
            double kx = kx0;
            double ky = ky0;
            for (int i=0;i<m;++i,kx+=dkx,ky+=dkyx) {
                double ksq = kx*kx + ky*ky;
                if (ksq > _ksq_max) {
                    *valit++ = 0.;
                } else if (ksq < _ksq_min) {
                    *valit++ = _flux * (1. - 1.5*ksq*(1. - 1.25*ksq));
                } else {
                    double temp = 1. + ksq;
                    *valit++ =  _flux/(temp*sqrt(temp));
                }
            }
        }
    }
Exemple #19
0
    void SBBox::SBBoxImpl::fillXValue(tmv::MatrixView<double> val,
                                      double x0, double dx, int izero,
                                      double y0, double dy, int jzero) const
    {
        dbg<<"SBBox fillXValue\n";
        dbg<<"x = "<<x0<<" + i * "<<dx<<", izero = "<<izero<<std::endl;
        dbg<<"y = "<<y0<<" + j * "<<dy<<", jzero = "<<jzero<<std::endl;

        assert(val.stepi() == 1);
        const int m = val.colsize();
        const int n = val.rowsize();
        typedef tmv::VIt<double,1,tmv::NonConj> It;

        // It will be useful to do everything in units of dx,dy
        x0 /= dx;
        double wo2 = _wo2 / std::abs(dx);
        y0 /= dy;
        double ho2 = _ho2 / std::abs(dy);
        xdbg<<"x0,y0 -> "<<x0<<','<<y0<<std::endl;
        xdbg<<"width,height -> "<<wo2*2.<<','<<ho2*2.<<std::endl;

        // Start by setting everything to zero
        val.setZero();

        // Then fill the interior with _norm:
        // Fill pixels where:
        //     x0 + ix >= -width/2
        //     x0 + ix < width/2
        //     y0 + iy >= -width/2
        //     y0 + iy < width/2

        int ix1 = std::max(0, int(std::ceil(-wo2 - x0)));
        int ix2 = std::min(m, int(std::ceil(wo2 - x0)));
        int iy1 = std::max(0, int(std::ceil(-ho2 - y0)));
        int iy2 = std::min(n, int(std::ceil(ho2 - y0)));

        if (ix1 < ix2 && iy1 < iy2)
            val.subMatrix(ix1,ix2,iy1,iy2).setAllTo(_norm);

#if 0
        // We used to implement this by making the pixels that cross the edge have a
        // fractional flux value appropriate for the fraction of the box that goes through
        // each pixel.  However, this isn't actually correct.  SBProfile objects are always
        // rendered as the local surface brightness at the center of the pixel.  To get
        // the right flux, you need to convolve by a Pixel.  So if someone renders a Box
        // without convolving by a pixel, it is inconsistent to do this differently than we
        // do all the other SBProfile types.  However, since it was an involved calculation
        // and someone might actually care to resurrect it in a different guise at some point,
        // I'm leaving it here, just commented out.

        // We need to make sure the pixels where the edges of the box fall only get
        // a fraction of the flux.
        //
        // We divide up the range into 3 sections in x:
        //    left of the box where val = 0
        //    in the box where val = _norm
        //    right of the box where val = 0 again
        //
        // ... and 3 sections in y:
        //    below the box where val = 0
        //    in the box where val = _norm
        //    above the box where val = 0 again
        //
        // Furthermore, we have to calculate the correct values for the pixels on the border.

        int ix_left, ix_right, iy_bottom, iy_top;
        double x_left, x_right, y_bottom, y_top;

        // Find the x edges:
        double tmp = 0.5*width + 0.5;
        ix_left = int(-tmp-x0+1);
        ix_right = int(tmp-x0);

        // If the box goes off the image, it's ok, but it will cause us problems
        // later on if we don't change it.  Just use ix_left = 0.
        if (ix_left < 0) { ix_left = 0; x_left = 1.; }

        // If the whole box is off the image, just zero and return.
        else if (ix_left >= m) { val.setZero(); return; }

        // Normal case: calculate the fractional flux in the edge
        else x_left = tmp+x0+ix_left;

        // Now the right side.
        if (ix_right >= m) { ix_right = m-1; x_right = 1.; }
        else if (ix_right < 0) { val.setZero(); return; }
        else x_right = tmp-x0-ix_right;
        xdbg<<"ix_left = "<<ix_left<<" with partial flux "<<x_left<<std::endl;
        xdbg<<"ix_right = "<<ix_right<<" with partial flux "<<x_right<<std::endl;

        // Repeat for y values
        tmp = 0.5*height + 0.5;
        iy_bottom = int(-tmp-y0+1);
        iy_top = int(tmp-y0);

        if (iy_bottom < 0) { iy_bottom = 0; y_bottom = 1.; }
        else if (iy_bottom >= n) { val.setZero(); return; }
        else y_bottom = tmp+y0+iy_bottom;

        if (iy_top >= n) { iy_top = n-1; y_top = 1.; }
        else if (iy_top < 0) { val.setZero(); return; }
        else y_top = tmp-y0-iy_top;
        xdbg<<"iy_bottom = "<<iy_bottom<<" with partial flux "<<y_bottom<<std::endl;
        xdbg<<"iy_top = "<<iy_top<<" with partial flux "<<y_top<<std::endl;
        xdbg<<"m,n = "<<m<<','<<n<<std::endl;

        // Now we need to fill the matrix with the appropriate values in each section.
        // Start with the zeros:
        if (0 < ix_left)
            val.subMatrix(0,ix_left,iy_bottom,iy_top+1).setZero();
        if (ix_right+1 < m)
            val.subMatrix(ix_right+1,m,iy_bottom,iy_top+1).setZero();
        if (0 < iy_bottom)
            val.colRange(0,iy_bottom).setZero();
        if (iy_top+1 < n)
            val.colRange(iy_top+1,n).setZero();
        // Then the interior:
        if (ix_left+1 < ix_right && iy_bottom+1 < iy_top)
            val.subMatrix(ix_left+1,ix_right,iy_bottom+1,iy_top).setAllTo(_norm);
        // And now the edges:
        if (ix_left+1 < ix_right) {
            val.col(iy_bottom,ix_left+1,ix_right).setAllTo(y_bottom * _norm);
            val.col(iy_top,ix_left+1,ix_right).setAllTo(y_top * _norm);
        }
        if (iy_bottom+1 < iy_top) {
            val.row(ix_left,iy_bottom+1,iy_top).setAllTo(x_left * _norm);
            val.row(ix_right,iy_bottom+1,iy_top).setAllTo(x_right * _norm);
        }
        // Finally the corners
        val(ix_left,iy_bottom) = x_left * y_bottom * _norm;
        val(ix_right,iy_bottom) = x_right * y_bottom * _norm;
        val(ix_left,iy_top) = x_left * y_top * _norm;
        val(ix_right,iy_top) = x_right * y_top * _norm;
#endif
    }