SmapiNNTPd
                                    ==========

1. Introduction
===============
SmapiNNTPd is an NNTP server that allows newsreaders to access JAM, Squish,
or *.msg message bases and was originally derived from JamNNTPd which could
only access JAM message bases.

This program needs SMAPI to run, get it at http://husky.sourceforge.net/


2. Copyright
============

Copyright (C)      2013, Robert James Clay <jame@rocasa.us>
Copyright (C)      2013, Ruedi Knebuehler <ruedi@baboon.ch>
Copyright (C) 2003-2005, Johan Billing <billing@df.lth.se>

Permission to use, copy and distribute SmapiNNTPd is granted provided that
this copyright notice is included. Permission to modify SmapiNNTPd is granted.
Distributing modified versions of SmapiNNTPd is allowed provided that the
documentation clearly states that it is a modified version. Parts of SmapiNNTPd
may be freely used in other projects as long as credit is given.

3. Security
===========
I cannot guarantee that there are no security leaks in SmapiNNTPd. If you
decide to use it, you do it on your own risk. If you use SmapiNNTPd under
Linux, you should avoid running it with root privileges.

4. Using SmapiNNTPd
=================

4.1 Configuration options
-------------------------
The behaviour of SmapiNNTPd can be configured using the configuration options 
specified below. These can be given to SmapiNNTPd in two ways:

1) As commandline arguments

2) In a configuration file (see -config command). The preceding dash (-) 
   is optional when an option is given in a file, it will be added if missing.
   A configuration file with the default settings can be created with the 
   -create option.

If SmapiNNTPd is run without any commandline arguments at all, it will attempt 
to read options from a file called "jamnntpd.config" if present. Under Linux, 
SmapiNNTPd  will look for this file in the "/etc" directory and under Windows 
in the current directory. 

It is not necessary to specify any configuration options at all unless when
fine-tuning SmapiNNTPd, the default have been designed to be sensible.


General options:

 -port <port> or -p <port>

   Set the port where SmapiNNTPd listens for connections. The default is 5000.

 -max <maxconn> or -m <maxconn>

   The maximum allowed number of connections at one time. The default is 5.

 -groups <groupsfile> or -g <groupsfile>
 -allow <allowfile> or -a <allowfile>
 -users <usersfile> or -u <usersfile>
 -xlat <xlatfile> or -x <xlatfile>

   Use these to override the default locations of the config files.

 -logfile <logfile> or -l <logfile>

   Use this to override the default location of the log file.

 -noecholog

   Disables echoing of log messages to the console window.
 
 -debug

   If this option is used, SmapiNNTPd will print all sent and received text
   to the console window. Useful for testing.

Options for displaying messages:

 -readorigin
  
   Get address from the Origin line instead of the OADDRESS field of the JAM 
   message header. This option makes SmapiNNTPd slower, but may be useful if 
   your tosser does not set the OADDRESS field.
      
 -noencode

   SmapiNNTPd by default MIME-encodes headers with non-ascii characters. If you
   use this option, SmapiNNTPd will instead send the headers as plain 8-bit text.

 -strictnetmail
 
   Makes SmapiNNTPd use strict article counters for netmail messages. Normally
   SmapiNNTPd uses article counters that include all messages, not only those
   that the user is allowed to read. That behaviour is much faster, but may 
   cause your newsreader to indicate the presence of new messages in the 
   netmail area even when there are only messages for other users. Using this
   option will make SmapiNNTPd slower, but speed seems to be acceptable for 
   small netmail areas with up to 1000 messages. Users will never be allowed 
   to actually read netmail messages of other users even when this option is 
   not used.
   
 -def_flowed on/off
 -def_showto on/off

   Sets the default of the flowed and showto settings (if no default is
   specified on the commandline, both will be on by default)

    flowed: If flowed is on, SmapiNNTPd will use format=flowed (section 6.5),
            otherwise it will wrap long lines to a fixed width.

    showto: Since there is no receiver for news messages, SmapiNNTPd can display
            the receiver name as a part of the sender name. With this option,
            this behaviour can be turned on or off.

   These can be modified by the user by logging in with parameters (section 4.4)
   

Options for posting messages:

 -nostripre

   SmapiNNTPd normally strips "Re:" from subject lines of followups. Use
   this option if you want to retain the "Re:".

 -notearline

   SmapiNNTPd normally puts the information from the X-Newsreader or User-Agent
   header field in the tearline of posted messages. This option disables this
   behaviour and leaves the tearline blank.
 
 -noreplyaddr

   SmapiNNTPd normally adds a REPLYADDR kludge with the e-mail address of the
   sender in posted messages. Use this option if you don't want REPLYADDR
   kludges. See also see section 6.4 below.

 -notzutc

   SmapiNNTPd normally writes the timezone into a TZUTC kludge when a message
   is posted. You can use this option if you don't want to create TZUTC kludges.

 -nocancel
 
   Disallows the cancelling (deleting) of messages by the users. If allowed,
   users can only cancel messages from one of their "realnames" and only if
   the message has not yet been sent.
 
 -smartquote

   The quoting style of most newsreaders is different from traditional fidonet
   software. If you enable this option, SmapiNNTPd will try to change any quoted
   lines to fidonet style. This means that it will try to insert the initials
   of the person you reply to before the '>' character and also that it will try
   to compound multiple generations of quotes, i.e. "AA> BB>" will be changed
   into "BB>>".

   Reformatting quotes in this way means that the user who posts a message will
   no longer have final say over the final content of the message since it will
   be changed after he or she sends it to SmapiNNTPd. Since this in principle is
   a bad thing even if quoted text will look a lot better after reformatting,
   this option is turned off by default.

 -origin <origin>

   Normally SmapiNNTPd uses the text found in the Organization header line as 
   the Origin line text in posted messages. You can use this switch to 
   override the Organization line and set your own origin for all posted 
   messages. One can have up to 10 Origins, that are selected at random.
   If using more than one Origin, they must be separated by the "|" sign.
   Origin "Linux what else|BB is watching U|Don't talk nonsense!|"
	 
	 
 
 -guestsuffix <suffix>
 
   If desired, SmapiNNTPd can add a suffix to posts from unauthenticated users. 
   To activate that feature, specify the suffix here. 
    
   Example:  -guestsuffix " [GUEST]".
   
 -echomailjam <echomail.jam>
 
   If you specify a filename here, SmapiNNTPd will write a line to this file 
   with the messagebase and message number for each message that is posted.
   The file follows the ECHOMAIL.JAM format supported by some tossers. 
 

Options for configuration files:

 -config <configfile>
 
   Read options from the specified configuration file.
   
 -create <configfile>
 
   Create a configuration file with the default settings.
   
       
4.2 Access rights
-----------------
Access rights in SmapiNNTPd is based on access groups. Every newsgroup in
SmapiNNTPd belongs to an acess group. Access groups are named using one letter,
typically A to Z (access groups are case-insensitive). In the configuration
files, you can use "*" for "all groups" and "-" for "no groups". 

When a user connects to the server, he/she gets access to two set of access
groups. The first set of groups are for read access and the second set of
groups are for post access. Users are only allowed to read newsgroups that
belong to an access group they have read access to and are only allowed to
post to newsgroups belong to an access group that they have post access to.
The default access groups for users are configured in the "allow" file.

A user might get access to additional access groups if he/she logs in to the
server using the AUTHINFO command. The groups associated with a user are
defined in the "users" file.

4.3 Configuration files
-----------------------
SmapiNNTPd uses four configuration files:

1) In the "groups" file, the message areas that SmapiNNTPd should provide as
   newsgroups are configured. The first character of the path decides the
   messagebase type:

!path => JAM
$path => Squish
#path => *.msg

If the first character is neither of those, JAM will be assumed.

2) In the "allow" file, the IP numbers that are allowed to use the server
   are listed. Here you also set the default access rights for users before
   they log in.

3) In the "users" file, you can list users that should be given access to
   additional groups if they log in.

4) In the "xlat" file, you can configure translation between the different
   character sets used in your JAM messagebase and your newsreader.

The format of these files can be seen in the example configuration files.
You do not need to restart SmapiNNTPd if you change them since they are read
every time a new connection to the server is made.

4.4 Logging in with parameters
------------------------------
Since it is likely that all users will not prefer the same settings for the
flowed and showto options (see section 4.1), these can be modified by the
user by logging in with parameters.

If you want to set these options, login using a login name of this format:

 username/option1=on,option2=off

If you want to set options without logging in, just omit the user name and
enter anything as your password.

Examples:

 billing/showto=off
 billing/flowed=on,showto=on
 /flowed=off

5. Compilation
==============
SmapiNNTPd should compile with most compilers. I use gcc under Linux and MinGW
under Windows. To compile SmapiNNTPd, go to the src directory and type either 
"make linux" or "make win32" depending on what platform you are compiling 
SmapiNNTPd on. After a successful compilation, you will find a file called 
"jamnntpd" or "jamnntpd.exe" in the src directory.

6. Compatibility
================

6.1 The NNTP protocol
---------------------
SmapiNNTPd supports most of the basic NNTP protocol as specified in RFC-977.
The commands IHAVE, NEWGROUPS and NEWNEWS are not implemented, but at least
give valid response codes if a newsreader tries to use them. SmapiNNTPd also
supports the XOVER and AUTHINFO commands as specified in RFC-2980. XOVER
never sends information about the line counts and byte counts of messages.

6.2 Format of news messages
---------------------------
SmapiNNTPd probably breaks the RFC-1036 specification on some minor points,
but seems to work well enough with most newsreaders.

MIME is supported. Headers with non-ascii characters are encoded using
quoted-printable or base64 unless disabled with -noencode. Message bodies
are always sent as 7bit or 8bit. The charset is always set to "us-ascii"
if a message does not contain non-ascii characters.

Posted messages can either be in plain text (8bit or 7bit) or encoded
with quoted-printable of base64. Posted messages are only accepted if they
are in the format text/plain (i. e. HTML and multipart messages will be
rejected). Crossposted messages will be rejected. Messages longer than
20 000 bytes will also be rejected.

6.3 MSGID / Message-ID
----------------------
SmapiNNTPd does not present the MSGIDs found in the JAM messagebase as
Message-IDs to the newsreader, but rather uses its own dummy Message-IDs
instead. The references line in followups will be replaced by the proper
REPLY line.

6.4 REPLYADDR
-------------
When a message is posted to a JAM messagebase, SmapiNNTPd converts the original
from address to a REPLYADDR kludge. According to FSC-0035, REPLYADDR kludges
should be accompanied by a REPLYTO line. SmapiNNTPd does not create a REPLYTO
line, but this should not be a major problem. If you want to disable the
REPLYADDR kludge altogether, use the -noreplyaddr option.

6.5 format=flowed
-----------------
A recent extension to MIME (RFC-2646) specifies a format for "flowed" text,
i. e. text that only has line breaks between paragraphs and not after every
line. This format is more well-suited for fidonet messages than the
traditional format since fidonet has always used "flowed" text.

SmapiNNTPd uses format=flowed unless disabled with the -def_flowed switch or
with login parameters, and it is preferable to use a newsreader that also 
supports this format. Unfortunately, only few newsreaders support this format 
today. SmapiNNTPd will also work with other newsreaders, but messages will look 
slightly worse both on the NNTP and fidonet side.

6.6 Character set translation
-----------------------------
SmapiNNTPd has good support for character sets. The character set translation
is configured in the "xlat" file and uses CHS files in the GoldED+ format for
the actual translation. Extended CHS files with 256 character translations
are supported and a character may be translated to up to four characters.

6.7 Netmail
-----------
SmapiNNTPd now also supports netmail. In netmail areas, users can only read
messages to or from one of the names configured in the jamnntpd.users file.
Replies to netmails are handled transparently and the name and address of
the recipient are taken from the original message. When a user wants to write
a new netmail, the name and address of the recipient are specified on the
first line of the new message using this format:

 To: name,address
 
Example:

 To: Johan Billing, 2:15/87
 
A To: line can also be used to specify an alternative recipient in both 
netmail and echomail areas.
 
6.8 Tested newsreaders
----------------------
SmapiNNTPd has been found to work with the following newsreaders:

   Mozilla 1.4.1
   Outlook Express 6.00.2800.1106
   KNode 0.7.2
   Xnews 5.04.25
   40tude Dialog 2.0.7.1
   Forte Free Agent 1.93/32.576
   Lynx 2.8.5

Of these, only Mozilla seems to support format=flowed.

7. How to create additional *.chs files
=======================================
The *.chs files in the "xlat" and "unicode/xlat" directories are character 
set translation tables in the GoldED+ format. The files were created from 
mappings files found at this URL:
 
 http://www.unicode.org/Public/MAPPINGS/

Fallback sequences for characters that don't exist in the target charset 
were taken from Markus Kuhn's transliteration tables found at the URL below:

 http://www.cl.cam.ac.uk/~mgk25/download/transtab.tar.gz
 
If you want to create additional translation tables, you can easily do so 
with the supplied utility "makechs". 

Syntax for makechs:

 makechs <fromchrs> <destchrs> <frommap> [<destmap>]
   
<fromchrs> is the fidonet name of the charset you want to convert from.
  
<destchrs> is the fidonet name of the charset you want to convert to.
   
<frommap> is the Unicode mappings file for the source charset. 
   
<destmap> is the Unicode mappings file for the destination charset. If 
you don't supply a mappings file, makechs will instead create a chs file
that converts the source charset to utf-8.

The output of makechs is written to the console and needs to be redirected
to the desired file.

Examples:

 makechs IBMPC LATIN-1 map/cp437.txt map/8859-1.txt >437_iso.chs
 makechs IBMPC UTF-8 map/cp437.txt >437_utf.chs
 
Mappings files for all imaginable character sets can be found at the Unicode 
site above.

8. Using the Husky project HPT tosser
=====================================
Some notes on using SmapiNNTPd with the hpt tosser from the Husky project:

 * The fidoconfig2jamnntpd.pl script homepage can be used to convert your
   area configuration to a jamnntpd.groups file.

 * If you want SmapiNNTPd to display the From address correctly, you need to
   run it with the -readorigin switch.

 * When hpt creates JAM messagebases, it does not create the lastread (*.jlr)
   file. SmapiNNTPd will not be able to open an area unless all four JAM files
   are present. The checkgroups.pl script from the SmapiNNTPd homepage can be
   used to create missing *.jlr files.

 * Do NOT pack your messagebase with "hpt pack". When hpt packs a messagebase,
   it will also renumber it. This will cause the article numbers in SmapiNNTPd
   to change which will confuse most newsreaders.

 * SmapiNNTPd can optionally create an echomail.jam files with the paths to
   messagebases with messages to export. This file can not be used to tell
   hpt what areas to scan, but it can be converted to an echotoss.log file
   for hpt with the echomailjam2hpt.pl script.