Various Code Examples for MSP430G2553 (used at the Training Programme at NIT Patna, July 2016)
| Project Name | Description |
|---|---|
| 00-blink | Blink onboard Red LED |
| 01-testProject | Blink onboard Red and Green LEDs alternatively |
| 02-alternateBlink | Different implementation of alternative blinking |
| 03-testSwitch | Turn ON/OFF onboard LED using onboard Switch |
| 04-switchToggle | Toggle the onboard LED using the onboard Switch |
| 05-switchAlternate | Toggle between Red and Green LED using onboard Switch |
| 06-switchInterrupt | Toggle LED using external interrupt and low power modes |
| 07-blinkWatchdog | Illustrates the Watchdog Timer timeout and reset |
| 08-charlieplexing | Using 4 pins to control 12 LEDs using Charlieplexing |
| 09-charlieSwitch | Increment/Decrement charlieplexed LEDs using onboard Switch |
| 10-timerBlink | Use internal timer and low frequency oscillator to blink LED |
| 11-sevenSegment | Countinuously count from 0-9 on a seven segment disply |
| 12-sevenSegCounter | Use the onboard switch to increment the count on the seven segment display |
| 13-pwmTest | Fading effect on onboard Green LED using hardware PWM |
| 14-softwarePWM | Implementation of PWM using software time delays |
| 15-timerCapture | Uses the Input Capture mode of Timer to measure external signal period |
| 16-adcTest | Reads the internal temperature sensor and converts value to Celcius |
| 17-dcoTest | Cycles through calibrated DCO frequencies during runtime |
| 18-adcPWM | Use ADC input to control intensity of onboard Green LED |
| 19-adcPWM-lpm | Implementation of ADC based PWM control using low power modes |
| 20-uartEcho | Implements UART link at a baud rate of 9600. Echoes RX char + 1 |
| 21-helloWorld | Prints the string Hello World ! on the UART link |
| 22-uartPrintNum | Converts an integer value to string and prints it on the UART link |
| 23-uartADC | Displays the ADC value on the UART link |
| 24-spiShift | Use SPI protocol to send data to a shift register |
| 25-i2cTempSensor | Read temperature values from a LM75 sensor over I2C |
| 26-bitBangShift | Implements SPI communication with shift register by bit banging GPIO |
| 27-helloLCD | Connects to a 16x2 LCD using 4-bit mode, generic library .c & .h files |
| 28-simpleLCD | Simplified version of 16x2 LCD, requires all LCD pins to be on same port |
| 29-capTouch | Implementation of capacitive touch sensing using TI Libraries |
| 30-melodyBuzzer | Play a musical melody on a piezo buzzer using timers |