static void program_ddr0_06(unsigned long dimm_ranks[],
unsigned char const iic0_dimm_addr[],
unsigned long num_dimm_banks,
unsigned long sdram_freq)
{
unsigned long dimm_num;
unsigned char spd_40;
unsigned long t_wtr_ps = 0;
unsigned long t_rfc_ps = 0;
unsigned long t_wtr_clk;
unsigned long t_rfc_clk;
u32 ddr0_06 =
DDR0_06_WRITEINTERP_ENCODE(0x1) | DDR0_06_TDLL_ENCODE(200);
/*------------------------------------------------------------------
* Handle the timing. We need to find the worst case timing of all
* the dimm modules installed.
*-----------------------------------------------------------------*/
/* loop through all the DIMM slots on the board */
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_ranks[dimm_num]) {
unsigned long ps;
/* tWTR */
ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 37);
t_wtr_ps = max(t_wtr_ps, ps);
/* tRFC */
ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 42);
spd_40 = spd_read(iic0_dimm_addr[dimm_num], 40);
ps += 256000 * (spd_40 & 0x01);
switch ((spd_40 & 0x0E) >> 1) {
case 0x1:
ps += 250;
break;
case 0x2:
ps += 333;
break;
case 0x3:
ps += 500;
break;
case 0x4:
ps += 667;
break;
case 0x5:
ps += 750;
break;
}
t_rfc_ps = max(t_rfc_ps, ps);
}
}
debug("t_wtr_ps = %d\n", t_wtr_ps);
t_wtr_clk = (MULDIV64(sdram_freq, t_wtr_ps, ONE_BILLION) + 999) / 1000;
debug("t_rfc_ps = %d\n", t_rfc_ps);
t_rfc_clk = (MULDIV64(sdram_freq, t_rfc_ps, ONE_BILLION) + 999) / 1000;
mtsdram(DDR0_06, ddr0_06 | DDR0_06_TWTR_ENCODE(t_wtr_clk) |
DDR0_06_TRFC_ENCODE(t_rfc_clk));
}
static void program_ddr0_44(unsigned long dimm_ranks[],
unsigned char const iic0_dimm_addr[],
unsigned long num_dimm_banks,
unsigned long sdram_freq)
{
unsigned long dimm_num;
unsigned long t_rcd_ps = 0;
unsigned long t_rcd_clk;
/*------------------------------------------------------------------
* Handle the timing. We need to find the worst case timing of all
* the dimm modules installed.
*-----------------------------------------------------------------*/
/* loop through all the DIMM slots on the board */
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_ranks[dimm_num]) {
unsigned long ps;
ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 29);
t_rcd_ps = max(t_rcd_ps, ps);
}
}
debug("t_rcd_ps = %d\n", t_rcd_ps);
t_rcd_clk = (MULDIV64(sdram_freq, t_rcd_ps, ONE_BILLION) + 999) / 1000;
mtsdram(DDR0_44, DDR0_44_TRCD_ENCODE(t_rcd_clk));
}
static void program_ddr0_43(unsigned long dimm_ranks[],
unsigned char const iic0_dimm_addr[],
unsigned long num_dimm_banks,
unsigned long sdram_freq,
unsigned long cols, unsigned long banks)
{
unsigned long dimm_num;
unsigned long t_wr_ps = 0;
unsigned long t_wr_clk;
u32 ddr0_43 = DDR0_43_APREBIT_ENCODE(10) |
DDR0_43_COLUMN_SIZE_ENCODE(12 - cols) |
DDR0_43_EIGHT_BANK_MODE_ENCODE(8 == banks ? 1 : 0);
/*------------------------------------------------------------------
* Handle the timing. We need to find the worst case timing of all
* the dimm modules installed.
*-----------------------------------------------------------------*/
/* loop through all the DIMM slots on the board */
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_ranks[dimm_num]) {
unsigned long ps;
ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 36);
t_wr_ps = max(t_wr_ps, ps);
}
}
debug("t_wr_ps = %d\n", t_wr_ps);
t_wr_clk = (MULDIV64(sdram_freq, t_wr_ps, ONE_BILLION) + 999) / 1000;
mtsdram(DDR0_43, ddr0_43 | DDR0_43_TWR_ENCODE(t_wr_clk));
}
static void program_ddr0_26(unsigned long sdram_freq)
{
unsigned long const t_ref_ps = 7800000; /* 7.8 us. refresh */
/* TODO: check definition of tRAS_MAX */
unsigned long const t_ras_max_ps = 9 * t_ref_ps;
unsigned long t_ras_max_clk;
unsigned long t_ref_clk;
/* Round down t_ras_max_clk and t_ref_clk */
debug("t_ras_max_ps = %d\n", t_ras_max_ps);
t_ras_max_clk = MULDIV64(sdram_freq, t_ras_max_ps, ONE_BILLION) / 1000;
debug("t_ref_ps = %d\n", t_ref_ps);
t_ref_clk = MULDIV64(sdram_freq, t_ref_ps, ONE_BILLION) / 1000;
mtsdram(DDR0_26, DDR0_26_TRAS_MAX_ENCODE(t_ras_max_clk) |
DDR0_26_TREF_ENCODE(t_ref_clk));
}
static void program_ddr0_27(unsigned long sdram_freq)
{
unsigned long const t_init_ps = 200000000; /* 200 us. init */
unsigned long t_init_clk;
debug("t_init_ps = %d\n", t_init_ps);
t_init_clk =
(MULDIV64(sdram_freq, t_init_ps, ONE_BILLION) + 999) / 1000;
mtsdram(DDR0_27, DDR0_27_EMRS_DATA_ENCODE(0x0000) |
DDR0_27_TINIT_ENCODE(t_init_clk));
}
static void program_ddr0_11(unsigned long sdram_freq)
{
unsigned long const t_xsnr_ps = 200000; /* 200 ns */
unsigned long t_xsnr_clk;
debug("t_xsnr_ps = %d\n", t_xsnr_ps);
t_xsnr_clk =
(MULDIV64(sdram_freq, t_xsnr_ps, ONE_BILLION) + 999) / 1000;
mtsdram(DDR0_11, DDR0_11_SREFRESH_ENCODE(0) |
DDR0_11_TXSNR_ENCODE(t_xsnr_clk) | DDR0_11_TXSR_ENCODE(200));
}
static void program_ddr0_05(unsigned long dimm_ranks[],
unsigned char const iic0_dimm_addr[],
unsigned long num_dimm_banks,
unsigned long sdram_freq)
{
unsigned long dimm_num;
unsigned long t_rp_ps = 0;
unsigned long t_ras_ps = 0;
unsigned long t_rp_clk;
unsigned long t_ras_clk;
u32 ddr0_05 = DDR0_05_TMRD_ENCODE(0x2) | DDR0_05_TEMRS_ENCODE(0x2);
/*------------------------------------------------------------------
* Handle the timing. We need to find the worst case timing of all
* the dimm modules installed.
*-----------------------------------------------------------------*/
/* loop through all the DIMM slots on the board */
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_ranks[dimm_num]) {
unsigned long ps;
/* tRP */
ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 27);
t_rp_ps = max(t_rp_ps, ps);
/* tRAS */
ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 30);
t_ras_ps = max(t_ras_ps, ps);
}
}
debug("t_rp_ps = %d\n", t_rp_ps);
t_rp_clk = (MULDIV64(sdram_freq, t_rp_ps, ONE_BILLION) + 999) / 1000;
debug("t_ras_ps = %d\n", t_ras_ps);
t_ras_clk = (MULDIV64(sdram_freq, t_ras_ps, ONE_BILLION) + 999) / 1000;
mtsdram(DDR0_05, ddr0_05 | DDR0_05_TRP_ENCODE(t_rp_clk) |
DDR0_05_TRAS_MIN_ENCODE(t_ras_clk));
}
/*------------------------------------------------------------------
* For the memory DIMMs installed, this routine verifies that
* frequency previously calculated is supported.
*-----------------------------------------------------------------*/
static void check_frequency(unsigned long *dimm_ranks,
unsigned char const iic0_dimm_addr[],
unsigned long num_dimm_banks,
unsigned long sdram_freq)
{
unsigned long dimm_num;
unsigned long cycle_time;
unsigned long calc_cycle_time;
/*
* calc_cycle_time is calculated from DDR frequency set by board/chip
* and is expressed in picoseconds to match the way DIMM cycle time is
* calculated below.
*/
calc_cycle_time = MULDIV64(ONE_BILLION, 1000, sdram_freq);
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_ranks[dimm_num]) {
cycle_time =
get_tcyc(spd_read(iic0_dimm_addr[dimm_num], 9));
debug("cycle_time=%d ps\n", cycle_time);
if (cycle_time > (calc_cycle_time + 10)) {
/*
* the provided sdram cycle_time is too small
* for the available DIMM cycle_time. The
* additionnal 10ps is here to accept a small
* incertainty.
*/
printf
("ERROR: DRAM DIMM detected with cycle_time %d ps in "
"slot %d \n while calculated cycle time is %d ps.\n",
(unsigned int)cycle_time,
(unsigned int)dimm_num,
(unsigned int)calc_cycle_time);
printf
("Replace the DIMM, or change DDR frequency via "
"strapping bits.\n\n");
spd_ddr_init_hang();
}
}
}
}
int
tmr2us(ulong t)
{
return MULDIV64(t, 1000000, CLOCKFREQ, 24);
}
ulong
us2tmr(int us)
{
return MULDIV64(us, CLOCKFREQ, 1000000, 24);
}
int
tmr2us(ulong t)
{
return MULDIV64(t, 1000000, TIMER_HZ, 24);
}
static void program_ddr0_04(unsigned long dimm_ranks[],
unsigned char const iic0_dimm_addr[],
unsigned long num_dimm_banks,
unsigned long sdram_freq)
{
unsigned long dimm_num;
unsigned long t_rc_ps = 0;
unsigned long t_rrd_ps = 0;
unsigned long t_rtp_ps = 0;
unsigned long t_rc_clk;
unsigned long t_rrd_clk;
unsigned long t_rtp_clk;
/*------------------------------------------------------------------
* Handle the timing. We need to find the worst case timing of all
* the dimm modules installed.
*-----------------------------------------------------------------*/
/* loop through all the DIMM slots on the board */
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_ranks[dimm_num]) {
unsigned long ps;
/* tRC */
ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 41);
switch (spd_read(iic0_dimm_addr[dimm_num], 40) >> 4) {
case 0x1:
ps += 250;
break;
case 0x2:
ps += 333;
break;
case 0x3:
ps += 500;
break;
case 0x4:
ps += 667;
break;
case 0x5:
ps += 750;
break;
}
t_rc_ps = max(t_rc_ps, ps);
/* tRRD */
ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 28);
t_rrd_ps = max(t_rrd_ps, ps);
/* tRTP */
ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 38);
t_rtp_ps = max(t_rtp_ps, ps);
}
}
debug("t_rc_ps = %d\n", t_rc_ps);
t_rc_clk = (MULDIV64(sdram_freq, t_rc_ps, ONE_BILLION) + 999) / 1000;
debug("t_rrd_ps = %d\n", t_rrd_ps);
t_rrd_clk = (MULDIV64(sdram_freq, t_rrd_ps, ONE_BILLION) + 999) / 1000;
debug("t_rtp_ps = %d\n", t_rtp_ps);
t_rtp_clk = (MULDIV64(sdram_freq, t_rtp_ps, ONE_BILLION) + 999) / 1000;
mtsdram(DDR0_04, DDR0_04_TRC_ENCODE(t_rc_clk) |
DDR0_04_TRRD_ENCODE(t_rrd_clk) |
DDR0_04_TRTP_ENCODE(t_rtp_clk));
}
static void program_ddr0_03(unsigned long dimm_ranks[],
unsigned char const iic0_dimm_addr[],
unsigned long num_dimm_banks,
unsigned long sdram_freq,
unsigned long rows, unsigned long *cas_latency)
{
unsigned long dimm_num;
unsigned long cas_index;
unsigned long cycle_2_0_clk;
unsigned long cycle_3_0_clk;
unsigned long cycle_4_0_clk;
unsigned long cycle_5_0_clk;
unsigned long max_2_0_tcyc_ps = 100;
unsigned long max_3_0_tcyc_ps = 100;
unsigned long max_4_0_tcyc_ps = 100;
unsigned long max_5_0_tcyc_ps = 100;
unsigned char cas_available = 0x3C; /* value for DDR2 */
u32 ddr0_03 = DDR0_03_BSTLEN_ENCODE(0x2) | DDR0_03_INITAREF_ENCODE(0x2);
unsigned int const tcyc_addr[3] = { 9, 23, 25 };
/*------------------------------------------------------------------
* Get the board configuration info.
*-----------------------------------------------------------------*/
debug("sdram_freq = %d\n", sdram_freq);
/*------------------------------------------------------------------
* Handle the timing. We need to find the worst case timing of all
* the dimm modules installed.
*-----------------------------------------------------------------*/
/* loop through all the DIMM slots on the board */
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_ranks[dimm_num]) {
unsigned char const cas_bit =
spd_read(iic0_dimm_addr[dimm_num], 18);
unsigned char cas_mask;
cas_available &= cas_bit;
for (cas_mask = 0x80; cas_mask; cas_mask >>= 1) {
if (cas_bit & cas_mask)
break;
}
debug("cas_bit (SPD byte 18) = %02X, cas_mask = %02X\n",
cas_bit, cas_mask);
for (cas_index = 0; cas_index < 3;
cas_mask >>= 1, cas_index++) {
unsigned long cycle_time_ps;
if (!(cas_available & cas_mask)) {
continue;
}
cycle_time_ps =
get_tcyc(spd_read(iic0_dimm_addr[dimm_num],
tcyc_addr[cas_index]));
debug("cas_index = %d: cycle_time_ps = %d\n",
cas_index, cycle_time_ps);
/*
* DDR2 devices use the following bitmask for CAS latency:
* Bit 7 6 5 4 3 2 1 0
* TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
*/
switch (cas_mask) {
case 0x20:
max_5_0_tcyc_ps =
max(max_5_0_tcyc_ps, cycle_time_ps);
break;
case 0x10:
max_4_0_tcyc_ps =
max(max_4_0_tcyc_ps, cycle_time_ps);
break;
case 0x08:
max_3_0_tcyc_ps =
max(max_3_0_tcyc_ps, cycle_time_ps);
break;
case 0x04:
max_2_0_tcyc_ps =
max(max_2_0_tcyc_ps, cycle_time_ps);
break;
}
}
}
}
debug("cas_available (bit map) = 0x%02X\n", cas_available);
/*------------------------------------------------------------------
* Set the SDRAM mode, SDRAM_MMODE
*-----------------------------------------------------------------*/
/* add 10 here because of rounding problems */
cycle_2_0_clk = MULDIV64(ONE_BILLION, 1000, max_2_0_tcyc_ps) + 10;
cycle_3_0_clk = MULDIV64(ONE_BILLION, 1000, max_3_0_tcyc_ps) + 10;
cycle_4_0_clk = MULDIV64(ONE_BILLION, 1000, max_4_0_tcyc_ps) + 10;
cycle_5_0_clk = MULDIV64(ONE_BILLION, 1000, max_5_0_tcyc_ps) + 10;
debug("cycle_2_0_clk = %d\n", cycle_2_0_clk);
debug("cycle_3_0_clk = %d\n", cycle_3_0_clk);
debug("cycle_4_0_clk = %d\n", cycle_4_0_clk);
debug("cycle_5_0_clk = %d\n", cycle_5_0_clk);
if ((cas_available & 0x04) && (sdram_freq <= cycle_2_0_clk)) {
*cas_latency = 2;
ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x2) |
DDR0_03_CASLAT_LIN_ENCODE(0x4);
} else if ((cas_available & 0x08) && (sdram_freq <= cycle_3_0_clk)) {
*cas_latency = 3;
ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x3) |
DDR0_03_CASLAT_LIN_ENCODE(0x6);
} else if ((cas_available & 0x10) && (sdram_freq <= cycle_4_0_clk)) {
*cas_latency = 4;
ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x4) |
DDR0_03_CASLAT_LIN_ENCODE(0x8);
} else if ((cas_available & 0x20) && (sdram_freq <= cycle_5_0_clk)) {
*cas_latency = 5;
ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x5) |
DDR0_03_CASLAT_LIN_ENCODE(0xA);
} else {
printf("ERROR: Cannot find a supported CAS latency with the "
"installed DIMMs.\n");
printf("Only DDR2 DIMMs with CAS latencies of 2.0, 3.0, 4.0, "
"and 5.0 are supported.\n");
printf("Make sure the PLB speed is within the supported range "
"of the DIMMs.\n");
printf("sdram_freq=%ld cycle2=%ld cycle3=%ld cycle4=%ld "
"cycle5=%ld\n\n", sdram_freq, cycle_2_0_clk,
cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
spd_ddr_init_hang();
}
debug("CAS latency = %d\n", *cas_latency);
mtsdram(DDR0_03, ddr0_03);
}
int
tmr2ms(ulong t)
{
return MULDIV64(t, 1000, TIMER_HZ, 32);
}
ulong
ms2tmr(int ms)
{
return MULDIV64(ms, TIMER_HZ, 1000, 20);
}
ulong
ms2tmr(int ms)
{
return MULDIV64(ms, CLOCKFREQ, 1000, 20);
}
int
tmr2ms(ulong t)
{
return MULDIV64(t, 1000, CLOCKFREQ, 32);
}
ulong
us2tmr(int us)
{
return MULDIV64(us, TIMER_HZ, 1000000, 24);
}