Esempio n. 1
1
/*
 * Create socket for incoming connections and bind to it an address for
 * clients to use.  Returns -1 on failure.
 *
 * If '*family' is AF_UNIX and unix domain sockets are supported:
 * 'port' is ignored and 'address' is the path to the socket file in the filesystem.
 *
 * Otherwise:
 * address is a string representing the Inet/IPv6 address that the port
 * is advertised for.  To allow connections to all this host's internet
 * addresses from clients use address == "INADDR_ANY", or for localhost
 * access only use address == "INADDR_LOOPBACK".
 * On input, 'family' is a pointer to the address family to use (AF_INET,
 * AF_INET6) if the address specified is empty.  If the spec is not
 * empty then family is ignored and is set to the actual address family
 * used. 'family' must be initialized to AF_UNSPEC, in this case.
 */
static int
OpenRequestSocket(int port, const char *address, int *family,
		  int backlog, __pmFdSet *fdset, int *maximum)
{
    int			fd = -1;
    int			one, sts;
    __pmSockAddr	*myAddr;
    int			isUnix = 0;

    /*
     * Using this flag will eliminate the need for more conditional
     * compilation below, hopefully making the code easier to read and maintain.
     */
#if defined(HAVE_STRUCT_SOCKADDR_UN)
    if (*family == AF_UNIX)
	isUnix = 1;
#endif

    if (isUnix) {
	if ((myAddr = __pmSockAddrAlloc()) == NULL) {
	    __pmNoMem("OpenRequestSocket: can't allocate socket address",
		      sizeof(*myAddr), PM_FATAL_ERR);
	}

	/* Initialize the address. */
	__pmSockAddrSetFamily(myAddr, *family);
	__pmSockAddrSetPath(myAddr, address);

	/* Create the socket. */
	fd = __pmCreateUnixSocket();
    }
    else {
	/*
	 * If the address is unspecified, then use the address family we
	 * have been given, otherwise the family will be determined by
	 * __pmStringToSockAddr.
	 */
	if (address == NULL || strcmp(address, "INADDR_ANY") == 0) {
	    if ((myAddr = __pmSockAddrAlloc()) == NULL) {
		__pmNoMem("OpenRequestSocket: can't allocate socket address",
			  sizeof(*myAddr), PM_FATAL_ERR);
	    }
	    __pmSockAddrInit(myAddr, *family, INADDR_ANY, 0);
	}
	else if (strcmp(address, "INADDR_LOOPBACK") == 0) {
	    if ((myAddr = __pmSockAddrAlloc()) == NULL) {
		__pmNoMem("OpenRequestSocket: can't allocate socket address",
			  sizeof(*myAddr), PM_FATAL_ERR);
	    }
	    __pmSockAddrInit(myAddr, *family, INADDR_LOOPBACK, 0);
	}
	else {
	    if ((myAddr = __pmStringToSockAddr(address)) == NULL) {
		__pmNotifyErr(LOG_ERR, "OpenRequestSocket(%d, %s) invalid address\n",
			      port, address);
		goto fail;
	    }
	    *family = __pmSockAddrGetFamily(myAddr);
	}
	__pmSockAddrSetPort(myAddr, port);

	/* Create the socket. */
	if (*family == AF_INET)
	    fd = __pmCreateSocket();
	else if (*family == AF_INET6)
	    fd = __pmCreateIPv6Socket();
	else {
	    __pmNotifyErr(LOG_ERR, "OpenRequestSocket(%d, %s) invalid address family: %d\n",
			  port, address, *family);
	    goto fail;
	}
    }

    if (fd < 0) {
	__pmNotifyErr(LOG_ERR, "OpenRequestSocket(%d, %s, %s) __pmCreateSocket: %s\n",
		port, address, AddressFamily(*family), netstrerror());
	goto fail;
    }

    /* Ignore dead client connections. */
    one = 1;
#ifndef IS_MINGW
    if (__pmSetSockOpt(fd, SOL_SOCKET, SO_REUSEADDR, (char *)&one,
		       (__pmSockLen)sizeof(one)) < 0) {
	__pmNotifyErr(LOG_ERR,
		      "OpenRequestSocket(%d, %s, %s) __pmSetSockOpt(SO_REUSEADDR): %s\n",
		      port, address, AddressFamily(*family), netstrerror());
	goto fail;
    }
#else
    if (__pmSetSockOpt(fd, SOL_SOCKET, SO_EXCLUSIVEADDRUSE, (char *)&one,
		       (__pmSockLen)sizeof(one)) < 0) {
	__pmNotifyErr(LOG_ERR,
		      "OpenRequestSocket(%d, %s, %s) __pmSetSockOpt(EXCLUSIVEADDRUSE): %s\n",
		      port, address, AddressFamily(*family), netstrerror());
	goto fail;
    }
#endif

    /* and keep alive please - bad networks eat fds */
    if (__pmSetSockOpt(fd, SOL_SOCKET, SO_KEEPALIVE, (char *)&one,
		(__pmSockLen)sizeof(one)) < 0) {
	__pmNotifyErr(LOG_ERR,
		"OpenRequestSocket(%d, %s, %s) __pmSetSockOpt(SO_KEEPALIVE): %s\n",
		port, address, AddressFamily(*family), netstrerror());
	goto fail;
    }

    sts = __pmBind(fd, (void *)myAddr, __pmSockAddrSize());
    __pmSockAddrFree(myAddr);
    myAddr = NULL;
    if (sts < 0) {
	sts = neterror();
	__pmNotifyErr(LOG_ERR, "OpenRequestSocket(%d, %s, %s) __pmBind: %s\n",
		port, address, AddressFamily(*family), netstrerror());
	if (sts == EADDRINUSE)
	    __pmNotifyErr(LOG_ERR, "%s may already be running\n", pmProgname);
	goto fail;
    }

    if (isUnix) {
	/*
	 * For unix domain sockets, grant rw access to the socket for all,
	 * otherwise, on linux platforms, connection will not be possible.
	 * This must be done AFTER binding the address. See Unix(7) for details.
	 */
	sts = chmod(address, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH);
	if (sts != 0) {
	    __pmNotifyErr(LOG_ERR,
		"OpenRequestSocket(%d, %s, %s) chmod(%s): %s\n",
		port, address, AddressFamily(*family), address, strerror(errno));
	    goto fail;
	}
    }

    sts = __pmListen(fd, backlog);	/* Max. pending connection requests */
    if (sts < 0) {
	__pmNotifyErr(LOG_ERR, "OpenRequestSocket(%d, %s, %s) __pmListen: %s\n",
		port, address, AddressFamily(*family), netstrerror());
	goto fail;
    }

    if (fd > *maximum)
	*maximum = fd;
    __pmFD_SET(fd, fdset);
    return fd;

fail:
    if (fd != -1) {
        __pmCloseSocket(fd);
	/* We must unlink the socket file. */
	if (isUnix)
	    unlink(address);
    }
    if (myAddr)
        __pmSockAddrFree(myAddr);
    return -1;
}
Esempio n. 2
0
int
reconnect(void)
{
    int	    		sts;
    int			ctx;
    __pmContext		*ctxp;

    if ((ctx = pmWhichContext()) >= 0)
	ctxp = __pmHandleToPtr(ctx);
    if (ctx < 0 || ctxp == NULL) {
	fprintf(stderr, "%s: reconnect botch: cannot get context: %s\n", pmProgname, pmErrStr(ctx));
	exit(1);
    }
    sts = pmReconnectContext(ctx);
    if (sts >= 0) {
	time_t      now;
	time(&now);
	fprintf(stderr, "%s: re-established connection to PMCD on \"%s\" at %s\n",
		pmProgname, pmcd_host, ctime(&now));
	pmcdfd = ctxp->c_pmcd->pc_fd;
	__pmFD_SET(pmcdfd, &fds);
	numfds = maxfd() + 1;
    }
    PM_UNLOCK(ctxp->c_lock);
    return sts;
}
Esempio n. 3
0
static void
CheckNewClient(__pmFdSet * fdset, int rfd, int family)
{
    ClientInfo	*cp;

    if (__pmFD_ISSET(rfd, fdset)) {
	if ((cp = AcceptNewClient(rfd)) == NULL)
	    /* failed to negotiate, already cleaned up */
	    return;

	/* establish a new connection to pmcd */
	if ((cp->pmcd_fd = __pmAuxConnectPMCDPort(cp->pmcd_hostname, cp->pmcd_port)) < 0) {
#ifdef PCP_DEBUG
	    if (pmDebug & DBG_TRACE_CONTEXT)
		/* append to message started in AcceptNewClient() */
		fprintf(stderr, " oops!\n"
			"__pmAuxConnectPMCDPort(%s,%d) failed: %s\n",
			cp->pmcd_hostname, cp->pmcd_port,
			pmErrStr(-oserror()));
#endif
	    CleanupClient(cp, -oserror());
	}
	else {
	    if (cp->pmcd_fd > maxSockFd)
		maxSockFd = cp->pmcd_fd;
	    __pmFD_SET(cp->pmcd_fd, &sockFds);
#ifdef PCP_DEBUG
	    if (pmDebug & DBG_TRACE_CONTEXT)
		/* append to message started in AcceptNewClient() */
		fprintf(stderr, " fd=%d\n", cp->pmcd_fd);
#endif
	}
    }
}
Esempio n. 4
0
/* Establish a new socket connection to a client */
ClientInfo *
AcceptNewClient(int reqfd)
{
    static unsigned int	seq = 0;
    int			i, fd;
    __pmSockLen		addrlen;
    struct timeval	now;

    i = NewClient();
    addrlen = __pmSockAddrSize();
    fd = __pmAccept(reqfd, client[i].addr, &addrlen);
    if (fd == -1) {
        if (neterror() == EPERM) {
            __pmNotifyErr(LOG_NOTICE, "AcceptNewClient(%d): "
                          "Permission Denied\n", reqfd);
            client[i].fd = -1;
            DeleteClient(&client[i]);
            return NULL;
        }
        else {
            __pmNotifyErr(LOG_ERR, "AcceptNewClient(%d) __pmAccept: %s\n",
                          reqfd, netstrerror());
            Shutdown();
            exit(1);
        }
    }
    if (fd > maxClientFd)
        maxClientFd = fd;

    pmcd_openfds_sethi(fd);

    __pmFD_SET(fd, &clientFds);
    __pmSetVersionIPC(fd, UNKNOWN_VERSION);	/* before negotiation */
    __pmSetSocketIPC(fd);

    client[i].fd = fd;
    client[i].status.connected = 1;
    client[i].status.changes = 0;
    memset(&client[i].attrs, 0, sizeof(__pmHashCtl));

    /*
     * Note seq needs to be unique, but we're using a free running counter
     * and not bothering to check here ... unless we churn through
     * 4,294,967,296 (2^32) clients while one client remains connected
     * we won't have a problem
     */
    client[i].seq = seq++;
    __pmtimevalNow(&now);
    client[i].start = now.tv_sec;

#ifdef PCP_DEBUG
    if (pmDebug & DBG_TRACE_APPL0)
        fprintf(stderr, "AcceptNewClient(%d): client[%d] (fd %d)\n", reqfd, i, fd);
#endif
    pmcd_trace(TR_ADD_CLIENT, i, 0, 0);

    return &client[i];
}
Esempio n. 5
0
int
reconnect(void)
{
    int	    		sts;
    int			ctx;
    time_t		now;
    __pmContext		*ctxp;

    if ((ctx = pmWhichContext()) >= 0)
	ctxp = __pmHandleToPtr(ctx);
    if (ctx < 0 || ctxp == NULL) {
	fprintf(stderr, "%s: reconnect botch: cannot get context: %s\n",
		pmProgname, pmErrStr(ctx));
	exit(1);
    }
    sts = pmReconnectContext(ctx);
    if (sts >= 0) {
	pmcdfd = ctxp->c_pmcd->pc_fd;
	__pmFD_SET(pmcdfd, &fds);
	numfds = maxfd() + 1;
    }
    PM_UNLOCK(ctxp->c_lock);
    if (sts < 0)
	return sts;

    time(&now);
    fprintf(stderr, "%s: re-established connection to PMCD on \"%s\" at %s",
	    pmProgname, pmcd_host, ctime(&now));

    /*
     * Metrics may have changed while PMCD was unreachable, so we
     * need to recheck each metric to make sure that its PMID and
     * semantics have not changed.  We cannot recover if there is
     * an incompatible change - must defer to controlling scripts
     * or processes (a new-named archive will have to be created,
     * from a new pmlogger process, and pmlogrewrite/pmlogextract
     * will need to become involved if they need to be merged).
     */
    validate_metrics();

    /*
     * All metrics have been validated, however, this state change
     * represents a potential gap in the stream of metrics.  So we
     * must store a <mark> record at this point.
     */
     if ((sts = putmark()) < 0) {
	fprintf(stderr, "putmark: %s\n", pmErrStr(sts));
	exit(1);
    }

    return 0;
}
Esempio n. 6
0
	/*
	 * Opens a TCP socket and returns the descriptor
	 * Returns:
	 *	socket descriptor, or
	 *	-1 on error
	 */
int makeSocket(const char *host)
	{
	int sock;										/* Socket descriptor */
	int ret;
	int port;
	char *p;
	__pmFdSet wfds;
	struct timeval tv;
	struct timeval	*ptv;
	__pmSockAddr *myaddr;
	__pmHostEnt *servInfo;
	void *enumIx;
	int flags = 0;
	
	/* Check for port number specified in URL */
	p = strchr(host, ':');
	if(p)
	    {
		port = atoi(p + 1);
		*p = '\0';
	    }
	else
	    port = PORT_NUMBER;

	servInfo = __pmGetAddrInfo(host);
	if(servInfo == NULL) { errorSource = H_ERRNO; return -1; }

	sock = -1;
	enumIx = NULL;
	for (myaddr = __pmHostEntGetSockAddr(servInfo, &enumIx);
	     myaddr != NULL;
	     myaddr = __pmHostEntGetSockAddr(servInfo, &enumIx)) {
	    /* Create a socket */
	    if (__pmSockAddrIsInet(myaddr))
		sock = __pmCreateSocket();
	    else if (__pmSockAddrIsIPv6(myaddr))
		sock = __pmCreateIPv6Socket();
	    else
		sock = -1;

	    if (sock < 0) {
		__pmSockAddrFree(myaddr);
		continue; /* Try the next address */
	    }

	    /* Attempt to connect */
	    flags = __pmConnectTo(sock, myaddr, port);
	    __pmSockAddrFree(myaddr);

	    if (flags < 0) {
		/*
		 * Mark failure in case we fall out the end of the loop
		 * and try next address. sock has been closed in __pmConnectTo().
		 */
		sock = -1;
		continue;
	    }

	    /* FNDELAY and we're in progress - wait on select */
	    tv.tv_sec = timeout;
	    tv.tv_usec = 0;
	    ptv = (tv.tv_sec || tv.tv_usec) ? &tv : NULL;
	    __pmFD_ZERO(&wfds);
	    __pmFD_SET(sock, &wfds);
	    ret = __pmSelectWrite(sock+1, &wfds, ptv);

	    /* Was the connection successful? */
	    if (ret < 0) {
		if (oserror() == EINTR)
		    return _makeSocketErr(sock, FETCHER_ERROR, HF_CONNECTTIMEOUT);
		return _makeSocketErr(sock, ERRNO, 0);
	    }
	    ret = __pmConnectCheckError(sock);
	    if (ret == 0)
		break;

	    /* Unsuccessful connection. */
	    __pmCloseSocket(sock);
	    sock = -1;
	} /* loop over addresses */

	__pmHostEntFree(servInfo);

	if(sock == -1) { errorSource = ERRNO; return -1; }

	sock = __pmConnectRestoreFlags(sock, flags);
	if(sock < 0) { errorSource = ERRNO; return -1; }

	return sock;
	}
Esempio n. 7
0
static int
http_client_connectunix(const char *path, struct timeval *timeout)
{
#if defined(HAVE_STRUCT_SOCKADDR_UN)
    __pmFdSet		wfds;
    __pmSockAddr	*myAddr;
    struct timeval	stv, *ptv;
    int			fdFlags = 0;
    int			fd = -1;
    int			sts;
    int			rc;

    /* Initialize the socket address. */
    if ((myAddr = __pmSockAddrAlloc()) == NULL) {
	if (pmDebug & DBG_TRACE_HTTP)
	    fprintf(stderr, "HTTP connect unix(%s): out of memory\n", path);
	return -ENOMEM;
    }
    __pmSockAddrSetFamily(myAddr, AF_UNIX);
    __pmSockAddrSetPath(myAddr, path);

    if ((fd = __pmCreateUnixSocket()) < 0) {
	if (pmDebug & DBG_TRACE_HTTP) {
	    char	errmsg[PM_MAXERRMSGLEN];
	    fprintf(stderr, "HTTP connect unix(%s) unable to create socket: %s\n",
		    path, osstrerror_r(errmsg, sizeof(errmsg)));
	}
	__pmSockAddrFree(myAddr);
	return fd;
    }

    /* Attempt to connect */
    fdFlags = __pmConnectTo(fd, myAddr, -1);
    __pmSockAddrFree(myAddr);
    if (fdFlags < 0) {
	__pmCloseSocket(fd);
	return -ECONNREFUSED;
    }

    /* FNDELAY and we're in progress - wait on select */
    stv = *timeout;
    ptv = (stv.tv_sec || stv.tv_usec) ? &stv : NULL;
    __pmFD_ZERO(&wfds);
    __pmFD_SET(fd, &wfds);
    sts = 0;
    if ((rc = __pmSelectWrite(fd+1, &wfds, ptv)) == 1)
	sts = __pmConnectCheckError(fd);
    else if (rc == 0)
	sts = ETIMEDOUT;
    else
	sts = (rc < 0) ? neterror() : EINVAL;

    if (sts != 0) {
	/* Unsuccessful connection. */
	if (sts == ENOENT)
	    sts = ECONNREFUSED;
	__pmCloseSocket(fd);
	fd = -sts;
    }

    if (fd < 0)
	return fd;

    /*
     * If we're here, it means we have a valid connection; restore the
     * flags and make sure this file descriptor is closed if exec() is
     * called
     */
    return __pmConnectRestoreFlags(fd, fdFlags);

#else
    if (pmDebug & DBG_TRACE_HTTP)
	__pmNotifyErr(LOG_ERR, "HTTP connect unix(%s) not supported\n", path);
    return -EOPNOTSUPP;
#endif
}
Esempio n. 8
0
static int
http_client_connectto(const char *host, int port, struct timeval *timeout)
{
    struct timeval	stv, *ptv;
    __pmHostEnt		*servInfo;
    __pmSockAddr	*myAddr;
    __pmFdSet		readyFds, allFds;
    void		*enumIx;
    int			fdFlags[FD_SETSIZE];
    int			i, fd, sts, maxFd;

    if ((servInfo = __pmGetAddrInfo(host)) == NULL) {
	if (pmDebug & DBG_TRACE_HTTP)
	    fprintf(stderr, "HTTP connect(%s, %d): hosterror=%d, ``%s''\n",
		    host, port, hosterror(), hoststrerror());
	return -EHOSTUNREACH;
    }
    /*
     * We want to respect the connect timeout that has been configured, but we
     * may have more than one address to try.  Do this by creating a socket for
     * each address and then using __pmSelectWrite() to wait for one of them to
     * respond.  That way, the timeout is applied to all of the addresses
     * simultaneously.  First, create the sockets, add them to the fd set and
     * try to establish connectections.
     */
    __pmFD_ZERO(&allFds);
    maxFd = -1;
    enumIx = NULL;
    for (myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx);
	 myAddr != NULL;
	 myAddr = __pmHostEntGetSockAddr(servInfo, &enumIx)) {
	/* Create a socket */
	if (__pmSockAddrIsInet(myAddr))
	    fd = __pmCreateSocket();
	else if (__pmSockAddrIsIPv6(myAddr))
	    fd = __pmCreateIPv6Socket();
	else {
	    if (pmDebug & DBG_TRACE_HTTP)
		fprintf(stderr, "HTTP connect(%s, %d): bad address family %d\n",
			host, port, __pmSockAddrGetFamily(myAddr));
	    fd = -EINVAL;
	}
	if (fd < 0) {
	    __pmSockAddrFree(myAddr);
	    continue; /* Try the next address */
	}

	/* Attempt to connect */
	fdFlags[fd] = __pmConnectTo(fd, myAddr, port);
	__pmSockAddrFree(myAddr);
	if (fdFlags[fd] < 0) {
	    /*
	     * Mark failure in case we fall out the end of the loop
	     * and try next address
	     */
	    __pmCloseSocket(fd);
	    continue;
	}

	/* Add it to the fd set. */
	__pmFD_SET(fd, &allFds);
	if (fd > maxFd)
	    maxFd = fd;
    }
    __pmHostEntFree(servInfo);

    /* If we were unable to open any sockets, then give up. */
    if (maxFd == -1)
	return -ECONNREFUSED;

    /* FNDELAY and we're in progress - wait on select */
    __pmFD_COPY(&readyFds, &allFds);
    stv = *timeout;
    ptv = (stv.tv_sec || stv.tv_usec) ? &stv : NULL;
    sts = __pmSelectWrite(maxFd+1, &readyFds, ptv);

    /* Figure out what happened. */
    if (sts == 0)
	fd = -ETIMEDOUT;
    else if (sts < 0)
	fd = -neterror();
    else {
	/* Scan fd set, find first successfully connected socket (if any). */
	fd = -EINVAL;
	for (i = 0; i <= maxFd; ++i) {
	    if (__pmFD_ISSET(i, &readyFds)) {
		/* Successful connection? */
		sts = __pmConnectCheckError(i);
		if (sts == 0) {
		    fd = i;
		    break;
		}
		fd = -sts;
	    }
	}
    }

    /* Clean up the unused fds. */
    for (i = 0; i <= maxFd; ++i) {
	if (i != fd && __pmFD_ISSET(i, &allFds))
	    __pmCloseSocket(i);
    }

    if (fd < 0)
	return fd;

    /*
     * If we're here, it means we have a valid connection; restore the
     * flags and make sure this file descriptor is closed if exec() is
     * called
     */
    return __pmConnectRestoreFlags(fd, fdFlags[fd]);
}
Esempio n. 9
0
static int stomp_connect(const char *hostname, int port)
{
    __pmSockAddr *myaddr;
    __pmHostEnt *servinfo;
    void *enumIx;
    struct timeval tv;
    struct timeval *ptv;
    __pmFdSet wfds;
    int ret;
    int flags = 0;

    if ((servinfo = __pmGetAddrInfo(hostname)) == NULL)
	return -1;

    fd = -1;
    enumIx = NULL;
    for (myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx);
	 myaddr != NULL;
	 myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx)) {
	/* Create a socket */
	if (__pmSockAddrIsInet(myaddr))
	    fd = __pmCreateSocket();
	else if (__pmSockAddrIsIPv6(myaddr))
	    fd = __pmCreateIPv6Socket();
	else
	    fd = -1;

	if (fd < 0) {
	    __pmSockAddrFree(myaddr);
	    continue; /* Try the next address */
	}

	/* Attempt to connect */
	flags = __pmConnectTo(fd, myaddr, port);
	__pmSockAddrFree(myaddr);

	if (flags < 0) {
	    /*
	     * Mark failure in case we fall out the end of the loop
	     * and try next address. fd has been closed in __pmConnectTo().
	     */
	    fd = -1;
	    continue;
	}

	/* FNDELAY and we're in progress - wait on select */
	tv.tv_sec = timeout;
	tv.tv_usec = 0;
	ptv = (tv.tv_sec || tv.tv_usec) ? &tv : NULL;
	__pmFD_ZERO(&wfds);
	__pmFD_SET(fd, &wfds);
	ret = __pmSelectWrite(fd+1, &wfds, ptv);

	/* Was the connection successful? */
	if (ret <= 0) {
	    if (oserror() == EINTR)
		return -2;
	    continue;
	}
	ret = __pmConnectCheckError(fd);
	if (ret == 0)
	    break;

	/* Unsuccessful connection. */
	__pmCloseSocket(fd);
	fd = -1;
    } /* loop over addresses */

    __pmHostEntFree(servinfo);

    if(fd == -1)
	return -4;

    fd = __pmConnectRestoreFlags(fd, flags);
    if(fd < 0)
	return -5;

    return fd;
}
Esempio n. 10
0
int
DoFetch(ClientInfo *cip, __pmPDU* pb)
{
    int			i, j;
    int 		sts;
    int			ctxnum;
    __pmTimeval		when;
    int			nPmids;
    pmID		*pmidList;
    static pmResult	*endResult = NULL;
    static int		maxnpmids = 0;	/* sizes endResult */
    DomPmidList		*dList;		/* NOTE: NOT indexed by agent index */
    static int		nDoms = 0;
    static pmResult	**results = NULL;
    static int		*resIndex = NULL;
    __pmFdSet		waitFds;
    __pmFdSet		readyFds;
    int			nWait;
    int			maxFd;
    struct timeval	timeout;

    if (nAgents > nDoms) {
	if (results != NULL)
	    free(results);
	if (resIndex != NULL)
	    free(resIndex);
	results = (pmResult **)malloc((nAgents + 1) * sizeof (pmResult *));
	resIndex = (int *)malloc((nAgents + 1) * sizeof(int));
	if (results == NULL || resIndex == NULL) {
	    __pmNoMem("DoFetch.results", (nAgents + 1) * sizeof (pmResult *) + (nAgents + 1) * sizeof(int), PM_FATAL_ERR);
	}
	nDoms = nAgents;
    }
    memset(results, 0, (nAgents + 1) * sizeof(results[0]));

    sts = __pmDecodeFetch(pb, &ctxnum, &when, &nPmids, &pmidList);
    if (sts < 0)
	return sts;

    /* Check that a profile has been received from the specified context */
    if (ctxnum < 0 || ctxnum >= cip->szProfile ||
	cip->profile[ctxnum] == NULL) {
	__pmUnpinPDUBuf(pb);
	if (ctxnum < 0 || ctxnum >= cip->szProfile)
	    __pmNotifyErr(LOG_ERR, "DoFetch: bad ctxnum=%d\n", ctxnum);
	else
	    __pmNotifyErr(LOG_ERR, "DoFetch: no profile for ctxnum=%d\n", ctxnum);
	return PM_ERR_NOPROFILE;
    }

    if (nPmids > maxnpmids) {
	int		need;
	if (endResult != NULL)
	    free(endResult);
	need = (int)sizeof(pmResult) + (nPmids - 1) * (int)sizeof(pmValueSet *);
	if ((endResult = (pmResult *)malloc(need)) == NULL) {
	    __pmNoMem("DoFetch.endResult", need, PM_FATAL_ERR);
	}
	maxnpmids = nPmids;
    }

    dList = SplitPmidList(nPmids, pmidList);

    /* For each domain in the split pmidList, dispatch the per-domain subset
     * of pmIDs to the appropriate agent.  For DSO agents, the pmResult will
     * come back immediately.  If a request cannot be sent to an agent, a
     * suitable pmResult (containing metric not available values) will be
     * returned.
     */
    __pmFD_ZERO(&waitFds);
    nWait = 0;
    maxFd = -1;
    for (i = 0; dList[i].domain != -1; i++) {
	j = mapdom[dList[i].domain];
	results[j] = SendFetch(&dList[i], &agent[j], cip, ctxnum);
	if (results[j] == NULL) { /* Wait for agent's response */
	    int fd = agent[j].outFd;
	    agent[j].status.busy = 1;
	    __pmFD_SET(fd, &waitFds);
	    if (fd > maxFd)
		maxFd = fd;
	    nWait++;
	}
    }
    /* Construct pmResult for bad-pmID list */
    if (dList[i].listSize != 0)
	results[nAgents] = MakeBadResult(dList[i].listSize, dList[i].list, PM_ERR_NOAGENT);

    /* Wait for results to roll in from agents */
    while (nWait > 0) {
        __pmFD_COPY(&readyFds, &waitFds);
	if (nWait > 1) {
	    timeout.tv_sec = _pmcd_timeout;
	    timeout.tv_usec = 0;

            retry:
	    setoserror(0);
	    sts = __pmSelectRead(maxFd+1, &readyFds, &timeout);

	    if (sts == 0) {
		__pmNotifyErr(LOG_INFO, "DoFetch: select timeout");

		/* Timeout, terminate agents with undelivered results */
		for (i = 0; i < nAgents; i++) {
		    if (agent[i].status.busy) {
			/* Find entry in dList for this agent */
			for (j = 0; dList[j].domain != -1; j++)
			    if (dList[j].domain == agent[i].pmDomainId)
				break;
			results[i] = MakeBadResult(dList[j].listSize,
						   dList[j].list,
						   PM_ERR_NOAGENT);
			pmcd_trace(TR_RECV_TIMEOUT, agent[i].outFd, PDU_RESULT, 0);
			CleanupAgent(&agent[i], AT_COMM, agent[i].inFd);
		    }
		}
		break;
	    }
	    else if (sts < 0) {
		if (neterror() == EINTR)
		    goto retry;
		/* this is not expected to happen! */
		__pmNotifyErr(LOG_ERR, "DoFetch: fatal select failure: %s\n",
			netstrerror());
		Shutdown();
		exit(1);
	    }
	}

	/* Read results from agents that have them ready */
	for (i = 0; i < nAgents; i++) {
	    AgentInfo	*ap = &agent[i];
	    int		pinpdu;
	    if (!ap->status.busy || !__pmFD_ISSET(ap->outFd, &readyFds))
		continue;
	    ap->status.busy = 0;
	    __pmFD_CLR(ap->outFd, &waitFds);
	    nWait--;
	    pinpdu = sts = __pmGetPDU(ap->outFd, ANY_SIZE, _pmcd_timeout, &pb);
	    if (sts > 0)
		pmcd_trace(TR_RECV_PDU, ap->outFd, sts, (int)((__psint_t)pb & 0xffffffff));
	    if (sts == PDU_RESULT) {
		if ((sts = __pmDecodeResult(pb, &results[i])) >= 0)
		    if (results[i]->numpmid != aFreq[i]) {
			pmFreeResult(results[i]);
			sts = PM_ERR_IPC;
#ifdef PCP_DEBUG
			if (pmDebug & DBG_TRACE_APPL0)
			    __pmNotifyErr(LOG_ERR, "DoFetch: \"%s\" agent given %d pmIDs, returned %d\n",
					 ap->pmDomainLabel, aFreq[i], results[i]->numpmid);
#endif
		    }
	    }
	    else {
		if (sts == PDU_ERROR) {
		    int s;
		    if ((s = __pmDecodeError(pb, &sts)) < 0)
			sts = s;
		    else if (sts >= 0)
			sts = PM_ERR_GENERIC;
		    pmcd_trace(TR_RECV_ERR, ap->outFd, PDU_RESULT, sts);
		}
		else if (sts >= 0) {
		    pmcd_trace(TR_WRONG_PDU, ap->outFd, PDU_RESULT, sts);
		    sts = PM_ERR_IPC;
		}
	    }
	    if (pinpdu > 0)
		__pmUnpinPDUBuf(pb);

	    if (sts < 0) {
		/* Find entry in dList for this agent */
		for (j = 0; dList[j].domain != -1; j++)
		    if (dList[j].domain == agent[i].pmDomainId)
			break;
		results[i] = MakeBadResult(dList[j].listSize,
					   dList[j].list, sts);

		if (sts == PM_ERR_PMDANOTREADY) {
		    /* the agent is indicating it can't handle PDUs for now */
		    int k;
		    extern int CheckError(AgentInfo *ap, int sts);

		    for (k = 0; k < dList[j].listSize; k++)
			results[i]->vset[k]->numval = PM_ERR_AGAIN;
		    sts = CheckError(&agent[i], sts);
		}

#ifdef PCP_DEBUG
		if (pmDebug & DBG_TRACE_APPL0) {
		    fprintf(stderr, "RESULT error from \"%s\" agent : %s\n",
			    ap->pmDomainLabel, pmErrStr(sts));
		}
#endif
		if (sts == PM_ERR_IPC || sts == PM_ERR_TIMEOUT)
		    CleanupAgent(ap, AT_COMM, ap->outFd);
	    }
	}
    }

    endResult->numpmid = nPmids;
    __pmtimevalNow(&endResult->timestamp);
    /* The order of the pmIDs in the per-domain results is the same as in the
     * original request, but on a per-domain basis.  resIndex is an array of
     * indices (one per agent) of the next metric to be retrieved from each
     * per-domain result's vset.
     */
    memset(resIndex, 0, (nAgents + 1) * sizeof(resIndex[0]));

    for (i = 0; i < nPmids; i++) {
	j = mapdom[((__pmID_int *)&pmidList[i])->domain];
	endResult->vset[i] = results[j]->vset[resIndex[j]++];
    }
    pmcd_trace(TR_XMIT_PDU, cip->fd, PDU_RESULT, endResult->numpmid);

    sts = 0;
    if (cip->status.changes) {
	/* notify client of PMCD state change */
	sts = __pmSendError(cip->fd, FROM_ANON, (int)cip->status.changes);
	if (sts > 0)
	    sts = 0;
	cip->status.changes = 0;
    }
    if (sts == 0)
	sts = __pmSendResult(cip->fd, FROM_ANON, endResult);

    if (sts < 0) {
	pmcd_trace(TR_XMIT_ERR, cip->fd, PDU_RESULT, sts);
	CleanupClient(cip, sts);
    }

    /*
     * pmFreeResult() all the accumulated results.
     */
    for (i = 0; dList[i].domain != -1; i++) {
	j = mapdom[dList[i].domain];
	if (agent[j].ipcType == AGENT_DSO && agent[j].status.connected &&
	    !agent[j].status.madeDsoResult)
	    /* Living DSO's manage their own pmResult skeleton unless
	     * MakeBadResult was called to create the result.  The value sets
	     * within the skeleton need to be freed though!
	     */
	    __pmFreeResultValues(results[j]);
	else
	    /* For others it is dynamically allocated in __pmDecodeResult or
	     * MakeBadResult
	     */
	    pmFreeResult(results[j]);
    }
    if (results[nAgents] != NULL)
	pmFreeResult(results[nAgents]);
    __pmUnpinPDUBuf(pmidList);
    return 0;
}
Esempio n. 11
0
int
main(int argc, char **argv)
{
    int			c;
    int			sts;
    int			sep = __pmPathSeparator();
    int			use_localtime = 0;
    int			isdaemon = 0;
    char		*pmnsfile = PM_NS_DEFAULT;
    char		*username;
    char		*logfile = "pmlogger.log";
				    /* default log (not archive) file name */
    char		*endnum;
    int			i;
    task_t		*tp;
    optcost_t		ocp;
    __pmFdSet		readyfds;
    char		*p;
    char		*runtime = NULL;
    int	    		ctx;		/* handle corresponding to ctxp below */
    __pmContext  	*ctxp;		/* pmlogger has just this one context */
    int			niter;
    pid_t               target_pid = 0;

    __pmGetUsername(&username);

    /*
     * Warning:
     *		If any of the pmlogger options change, make sure the
     *		corresponding changes are made to pmnewlog when pmlogger
     *		options are passed through from the control file
     */
    while ((c = pmgetopt_r(argc, argv, &opts)) != EOF) {
	switch (c) {

	case 'c':		/* config file */
	    if (access(opts.optarg, F_OK) == 0)
		configfile = opts.optarg;
	    else {
		/* does not exist as given, try the standard place */
		char *sysconf = pmGetConfig("PCP_VAR_DIR");
		int sz = strlen(sysconf)+strlen("/config/pmlogger/")+strlen(opts.optarg)+1;
		if ((configfile = (char *)malloc(sz)) == NULL)
		    __pmNoMem("config file name", sz, PM_FATAL_ERR);
		snprintf(configfile, sz,
			"%s%c" "config%c" "pmlogger%c" "%s",
			sysconf, sep, sep, sep, opts.optarg);
		if (access(configfile, F_OK) != 0) {
		    /* still no good, error handling happens below */
		    free(configfile);
		    configfile = opts.optarg;
		}
	    }
	    break;

	case 'D':	/* debug flag */
	    sts = __pmParseDebug(opts.optarg);
	    if (sts < 0) {
		pmprintf("%s: unrecognized debug flag specification (%s)\n",
			pmProgname, opts.optarg);
		opts.errors++;
	    }
	    else
		pmDebug |= sts;
	    break;

	case 'h':		/* hostname for PMCD to contact */
	    pmcd_host_conn = opts.optarg;
	    break;

	case 'l':		/* log file name */
	    logfile = opts.optarg;
	    break;

	case 'L':		/* linger if not primary logger */
	    linger = 1;
	    break;

	case 'm':		/* note for port map file */
	    note = opts.optarg;
	    isdaemon = ((strcmp(note, "pmlogger_check") == 0) ||
			(strcmp(note, "pmlogger_daily") == 0));
	    break;

	case 'n':		/* alternative name space file */
	    pmnsfile = opts.optarg;
	    break;

	case 'p':
	    target_pid = (int)strtol(opts.optarg, &endnum, 10);
	    if (*endnum != '\0') {
		pmprintf("%s: invalid process identifier (%s)\n",
			 pmProgname, opts.optarg);
		opts.errors++;
	    } else if (!__pmProcessExists(target_pid)) {
		pmprintf("%s: PID error - no such process (%d)\n",
			 pmProgname, target_pid);
		opts.errors++;
	    }
	    break;

	case 'P':		/* this is the primary pmlogger */
	    primary = 1;
	    isdaemon = 1;
	    break;

	case 'r':		/* report sizes of pmResult records */
	    rflag = 1;
	    break;

	case 's':		/* exit size */
	    sts = ParseSize(opts.optarg, &exit_samples, &exit_bytes, &exit_time);
	    if (sts < 0) {
		pmprintf("%s: illegal size argument '%s' for exit size\n",
			pmProgname, opts.optarg);
		opts.errors++;
	    }
	    else if (exit_time.tv_sec > 0) {
		__pmAFregister(&exit_time, NULL, run_done_callback);
	    }
	    break;

	case 'T':		/* end time */
	    runtime = opts.optarg;
            break;

	case 't':		/* change default logging interval */
	    if (pmParseInterval(opts.optarg, &delta, &p) < 0) {
		pmprintf("%s: illegal -t argument\n%s", pmProgname, p);
		free(p);
		opts.errors++;
	    }
	    break;

	case 'U':		/* run as named user */
	    username = opts.optarg;
	    isdaemon = 1;
	    break;

	case 'u':		/* flush output buffers after each fetch */
	    /*
	     * all archive write I/O is unbuffered now, so maintain -u
	     * for backwards compatibility only
	     */
	    break;

	case 'v':		/* volume switch after given size */
	    sts = ParseSize(opts.optarg, &vol_switch_samples, &vol_switch_bytes,
			    &vol_switch_time);
	    if (sts < 0) {
		pmprintf("%s: illegal size argument '%s' for volume size\n", 
			pmProgname, opts.optarg);
		opts.errors++;
	    }
	    else if (vol_switch_time.tv_sec > 0) {
		vol_switch_afid = __pmAFregister(&vol_switch_time, NULL, 
						 vol_switch_callback);
            }
	    break;

        case 'V': 
	    archive_version = (int)strtol(opts.optarg, &endnum, 10);
	    if (*endnum != '\0' || archive_version != PM_LOG_VERS02) {
		pmprintf("%s: -V requires a version number of %d\n",
			 pmProgname, PM_LOG_VERS02); 
		opts.errors++;
	    }
	    break;

	case 'x':		/* recording session control fd */
	    rsc_fd = (int)strtol(opts.optarg, &endnum, 10);
	    if (*endnum != '\0' || rsc_fd < 0) {
		pmprintf("%s: -x requires a non-negative numeric argument\n", pmProgname);
		opts.errors++;
	    }
	    else {
		time(&rsc_start);
	    }
	    break;

	case 'y':
	    use_localtime = 1;
	    break;

	case '?':
	default:
	    opts.errors++;
	    break;
	}
    }

    if (primary && pmcd_host != NULL) {
	pmprintf(
	    "%s: -P and -h are mutually exclusive; use -P only when running\n"
	    "%s on the same (local) host as the PMCD to which it connects.\n",
		pmProgname, pmProgname);
	opts.errors++;
    }

    if (!opts.errors && opts.optind != argc - 1) {
	pmprintf("%s: insufficient arguments\n", pmProgname);
	opts.errors++;
    }

    if (opts.errors) {
	pmUsageMessage(&opts);
	exit(1);
    }

    if (rsc_fd != -1 && note == NULL) {
	/* add default note to indicate running with -x */
	static char	xnote[10];
	snprintf(xnote, sizeof(xnote), "-x %d", rsc_fd);
	note = xnote;
    }

    /* if we are running as a daemon, change user early */
    if (isdaemon)
	__pmSetProcessIdentity(username);

    __pmOpenLog("pmlogger", logfile, stderr, &sts);
    if (sts != 1) {
	fprintf(stderr, "%s: Warning: log file (%s) creation failed\n", pmProgname, logfile);
	/* continue on ... writing to stderr */
    }

    /* base name for archive is here ... */
    archBase = argv[opts.optind];

    if (pmcd_host_conn == NULL)
	pmcd_host_conn = "local:";

    /* initialise access control */
    if (__pmAccAddOp(PM_OP_LOG_ADV) < 0 ||
	__pmAccAddOp(PM_OP_LOG_MAND) < 0 ||
	__pmAccAddOp(PM_OP_LOG_ENQ) < 0) {
	fprintf(stderr, "%s: access control initialisation failed\n", pmProgname);
	exit(1);
    }

    if (pmnsfile != PM_NS_DEFAULT) {
	if ((sts = pmLoadASCIINameSpace(pmnsfile, 1)) < 0) {
	    fprintf(stderr, "%s: Cannot load namespace from \"%s\": %s\n", pmProgname, pmnsfile, pmErrStr(sts));
	    exit(1);
	}
    }

    if ((ctx = pmNewContext(PM_CONTEXT_HOST, pmcd_host_conn)) < 0) {
	fprintf(stderr, "%s: Cannot connect to PMCD on host \"%s\": %s\n", pmProgname, pmcd_host_conn, pmErrStr(ctx));
	exit(1);
    }
    pmcd_host = (char *)pmGetContextHostName(ctx);
    if (strlen(pmcd_host) == 0) {
	fprintf(stderr, "%s: pmGetContextHostName(%d) failed\n",
	    pmProgname, ctx);
	exit(1);
    }

    if (rsc_fd == -1) {
	/* no -x, so register client id with pmcd */
	__pmSetClientIdArgv(argc, argv);
    }

    /*
     * discover fd for comms channel to PMCD ... 
     */
    if ((ctxp = __pmHandleToPtr(ctx)) == NULL) {
	fprintf(stderr, "%s: botch: __pmHandleToPtr(%d) returns NULL!\n", pmProgname, ctx);
	exit(1);
    }
    pmcdfd = ctxp->c_pmcd->pc_fd;
    PM_UNLOCK(ctxp->c_lock);

    if (configfile != NULL) {
	if ((yyin = fopen(configfile, "r")) == NULL) {
	    fprintf(stderr, "%s: Cannot open config file \"%s\": %s\n",
		pmProgname, configfile, osstrerror());
	    exit(1);
	}
    }
    else {
	/* **ANY** Lex would read from stdin automagically */
	configfile = "<stdin>";
    }

    __pmOptFetchGetParams(&ocp);
    ocp.c_scope = 1;
    __pmOptFetchPutParams(&ocp);

    /* prevent early timer events ... */
    __pmAFblock();

    if (yyparse() != 0)
	exit(1);
    if (configfile != NULL)
	fclose(yyin);
    yyend();

#ifdef PCP_DEBUG
    fprintf(stderr, "Config parsed\n");
#endif

    fprintf(stderr, "Starting %slogger for host \"%s\" via \"%s\"\n",
            primary ? "primary " : "", pmcd_host, pmcd_host_conn);

#ifdef PCP_DEBUG
    if (pmDebug & DBG_TRACE_LOG) {
	fprintf(stderr, "optFetch Cost Parameters: pmid=%d indom=%d fetch=%d scope=%d\n",
		ocp.c_pmid, ocp.c_indom, ocp.c_fetch, ocp.c_scope);

	fprintf(stderr, "\nAfter loading config ...\n");
	for (tp = tasklist; tp != NULL; tp = tp->t_next) {
	    if (tp->t_numvalid == 0)
		continue;
	    fprintf(stderr, " state: %sin log, %savail, %s, %s",
		PMLC_GET_INLOG(tp->t_state) ? "" : "not ",
		PMLC_GET_AVAIL(tp->t_state) ? "" : "un",
		PMLC_GET_MAND(tp->t_state) ? "mand" : "adv",
		PMLC_GET_ON(tp->t_state) ? "on" : "off");
	    fprintf(stderr, " delta: %ld usec", 
			(long)1000 * tp->t_delta.tv_sec + tp->t_delta.tv_usec);
	    fprintf(stderr, " numpmid: %d\n", tp->t_numpmid);
	    for (i = 0; i < tp->t_numpmid; i++) {
		fprintf(stderr, "  %s (%s):\n", pmIDStr(tp->t_pmidlist[i]), tp->t_namelist[i]);
	    }
	    __pmOptFetchDump(stderr, tp->t_fetch);
	}
    }
#endif

    if (!primary && tasklist == NULL && !linger) {
	fprintf(stderr, "Nothing to log, and not the primary logger instance ... good-bye\n");
	exit(1);
    }

    if ((sts = __pmLogCreate(pmcd_host, archBase, archive_version, &logctl)) < 0) {
	fprintf(stderr, "__pmLogCreate: %s\n", pmErrStr(sts));
	exit(1);
    }
    else {
	/*
	 * try and establish $TZ from the remote PMCD ...
	 * Note the label record has been set up, but not written yet
	 */
	char		*name = "pmcd.timezone";
	pmID		pmid;
	pmResult	*resp;

	__pmtimevalNow(&epoch);
	sts = pmUseContext(ctx);

	if (sts >= 0)
	    sts = pmLookupName(1, &name, &pmid);
	if (sts >= 0)
	    sts = pmFetch(1, &pmid, &resp);
	if (sts >= 0) {
	    if (resp->vset[0]->numval > 0) { /* pmcd.timezone present */
		strcpy(logctl.l_label.ill_tz, resp->vset[0]->vlist[0].value.pval->vbuf);
		/* prefer to use remote time to avoid clock drift problems */
		epoch = resp->timestamp;		/* struct assignment */
		if (! use_localtime)
		    pmNewZone(logctl.l_label.ill_tz);
	    }
#ifdef PCP_DEBUG
	    else if (pmDebug & DBG_TRACE_LOG) {
		fprintf(stderr,
			"main: Could not get timezone from host %s\n",
			pmcd_host);
	    }
#endif
	    pmFreeResult(resp);
	}
    }

    /* do ParseTimeWindow stuff for -T */
    if (runtime) {
        struct timeval res_end;    /* time window end */
        struct timeval start;
        struct timeval end;
        struct timeval last_delta;
        char *err_msg;             /* parsing error message */
        time_t now;
        struct timeval now_tv;

        time(&now);
        now_tv.tv_sec = now;
        now_tv.tv_usec = 0; 

        start = now_tv;
        end.tv_sec = INT_MAX;
        end.tv_usec = INT_MAX;
        sts = __pmParseTime(runtime, &start, &end, &res_end, &err_msg);
        if (sts < 0) {
	    fprintf(stderr, "%s: illegal -T argument\n%s", pmProgname, err_msg);
            exit(1);
        }

        last_delta = res_end;
        tsub(&last_delta, &now_tv);
	__pmAFregister(&last_delta, NULL, run_done_callback);

        last_stamp = res_end;
    }

    fprintf(stderr, "Archive basename: %s\n", archBase);

#ifndef IS_MINGW
    /* detach yourself from the launching process */
    if (isdaemon)
        setpgid(getpid(), 0);
#endif

    /* set up control port */
    init_ports();
    __pmFD_ZERO(&fds);
    for (i = 0; i < CFD_NUM; ++i) {
	if (ctlfds[i] >= 0)
	    __pmFD_SET(ctlfds[i], &fds);
    }
#ifndef IS_MINGW
    __pmFD_SET(pmcdfd, &fds);
#endif
    if (rsc_fd != -1)
	__pmFD_SET(rsc_fd, &fds);
    numfds = maxfd() + 1;

    if ((sts = do_preamble()) < 0)
	fprintf(stderr, "Warning: problem writing archive preamble: %s\n",
	    pmErrStr(sts));

    sts = 0;		/* default exit status */

    parse_done = 1;	/* enable callback processing */
    __pmAFunblock();

    for ( ; ; ) {
	int		nready;

#ifdef PCP_DEBUG
	if ((pmDebug & DBG_TRACE_APPL2) && (pmDebug & DBG_TRACE_DESPERATE)) {
	    fprintf(stderr, "before __pmSelectRead(%d,...): run_done_alarm=%d vol_switch_alarm=%d log_alarm=%d\n", numfds, run_done_alarm, vol_switch_alarm, log_alarm);
	}
#endif

	niter = 0;
	while (log_alarm && niter++ < 10) {
	    __pmAFblock();
	    log_alarm = 0;
#ifdef PCP_DEBUG
	    if (pmDebug & DBG_TRACE_APPL2)
		fprintf(stderr, "delayed callback: log_alarm\n");
#endif
	    for (tp = tasklist; tp != NULL; tp = tp->t_next) {
		if (tp->t_alarm) {
		    tp->t_alarm = 0;
		    do_work(tp);
		}
	    }
	    __pmAFunblock();
	}

	if (vol_switch_alarm) {
	    __pmAFblock();
	    vol_switch_alarm = 0;
#ifdef PCP_DEBUG
	    if (pmDebug & DBG_TRACE_APPL2)
		fprintf(stderr, "delayed callback: vol_switch_alarm\n");
#endif
	    newvolume(VOL_SW_TIME);
	    __pmAFunblock();
	}

	if (run_done_alarm) {
#ifdef PCP_DEBUG
	    if (pmDebug & DBG_TRACE_APPL2)
		fprintf(stderr, "delayed callback: run_done_alarm\n");
#endif
	    run_done(0, NULL);
	    /*NOTREACHED*/
	}

	__pmFD_COPY(&readyfds, &fds);
	nready = __pmSelectRead(numfds, &readyfds, NULL);

#ifdef PCP_DEBUG
	if ((pmDebug & DBG_TRACE_APPL2) && (pmDebug & DBG_TRACE_DESPERATE)) {
	    fprintf(stderr, "__pmSelectRead(%d,...) done: nready=%d run_done_alarm=%d vol_switch_alarm=%d log_alarm=%d\n", numfds, nready, run_done_alarm, vol_switch_alarm, log_alarm);
	}
#endif

	__pmAFblock();
	if (nready > 0) {

	    /* handle request on control port */
	    for (i = 0; i < CFD_NUM; ++i) {
		if (ctlfds[i] >= 0 && __pmFD_ISSET(ctlfds[i], &readyfds)) {
		    if (control_req(ctlfds[i])) {
			/* new client has connected */
			__pmFD_SET(clientfd, &fds);
			if (clientfd >= numfds)
			    numfds = clientfd + 1;
		    }
		}
	    }
	    if (clientfd >= 0 && __pmFD_ISSET(clientfd, &readyfds)) {
		/* process request from client, save clientfd in case client
		 * closes connection, resetting clientfd to -1
		 */
		int	fd = clientfd;

		if (client_req()) {
		    /* client closed connection */
		    __pmFD_CLR(fd, &fds);
		    __pmCloseSocket(clientfd);
		    clientfd = -1;
		    numfds = maxfd() + 1;
		    qa_case = 0;
		}
	    }
#ifndef IS_MINGW
	    if (pmcdfd >= 0 && __pmFD_ISSET(pmcdfd, &readyfds)) {
		/*
		 * do not expect this, given synchronous commumication with the
		 * pmcd ... either pmcd has terminated, or bogus PDU ... or its
		 * Win32 and we are operating under the different conditions of
		 * our AF.c implementation there, which has to deal with a lack
		 * of signal support on Windows - race condition exists between
		 * this check and the async event timer callback.
		 */
		__pmPDU		*pb;
		__pmPDUHdr	*php;
		sts = __pmGetPDU(pmcdfd, ANY_SIZE, TIMEOUT_NEVER, &pb);
		if (sts <= 0) {
		    if (sts < 0)
			fprintf(stderr, "Error: __pmGetPDU: %s\n", pmErrStr(sts));
		    disconnect(sts);
		}
		else {
		    php = (__pmPDUHdr *)pb;
		    fprintf(stderr, "Error: Unsolicited %s PDU from PMCD\n",
			__pmPDUTypeStr(php->type));
		    disconnect(PM_ERR_IPC);
		}
		if (sts > 0)
		    __pmUnpinPDUBuf(pb);
	    }
#endif
	    if (rsc_fd >= 0 && __pmFD_ISSET(rsc_fd, &readyfds)) {
		/*
		 * some action on the recording session control fd
		 * end-of-file means launcher has quit, otherwise we
		 * expect one of these commands
		 *	V<number>\n	- version
		 *	F<folio>\n	- folio name
		 *	P<name>\n	- launcher's name
		 *	R\n		- launcher can replay
		 *	D\n		- detach from launcher
		 *	Q\n		- quit pmlogger
		 */
		char	rsc_buf[MAXPATHLEN];
		char	*rp = rsc_buf;
		char	myc;
		int	fake_x = 0;

		for (rp = rsc_buf; ; rp++) {
		    if (read(rsc_fd, &myc, 1) <= 0) {
#ifdef PCP_DEBUG
			if (pmDebug & DBG_TRACE_APPL2)
			    fprintf(stderr, "recording session control: eof\n");
#endif
			if (rp != rsc_buf) {
			    *rp = '\0';
			    fprintf(stderr, "Error: incomplete recording session control message: \"%s\"\n", rsc_buf);
			}
			fake_x = 1;
			break;
		    }
		    if (rp >= &rsc_buf[MAXPATHLEN]) {
			fprintf(stderr, "Error: absurd recording session control message: \"%100.100s ...\"\n", rsc_buf);
			fake_x = 1;
			break;
		    }
		    if (myc == '\n') {
			*rp = '\0';
			break;
		    }
		    *rp = myc;
		}

#ifdef PCP_DEBUG
		if (pmDebug & DBG_TRACE_APPL2) {
		    if (fake_x == 0)
			fprintf(stderr, "recording session control: \"%s\"\n", rsc_buf);
		}
#endif

		if (fake_x)
		    do_dialog('X');
		else if (strcmp(rsc_buf, "Q") == 0 ||
		         strcmp(rsc_buf, "D") == 0 ||
			 strcmp(rsc_buf, "?") == 0)
		    do_dialog(rsc_buf[0]);
		else if (rsc_buf[0] == 'F')
		    folio_name = strdup(&rsc_buf[1]);
		else if (rsc_buf[0] == 'P')
		    rsc_prog = strdup(&rsc_buf[1]);
		else if (strcmp(rsc_buf, "R") == 0)
		    rsc_replay = 1;
		else if (rsc_buf[0] == 'V' && rsc_buf[1] == '0') {
		    /*
		     * version 0 of the recording session control ...
		     * this is all we grok at the moment
		     */
		    ;
		}
		else {
		    fprintf(stderr, "Error: illegal recording session control message: \"%s\"\n", rsc_buf);
		    do_dialog('X');
		}
	    }
	}
	else if (vol_switch_flag) {
	    newvolume(VOL_SW_SIGHUP);
	    vol_switch_flag = 0;
	}
	else if (nready < 0 && neterror() != EINTR)
	    fprintf(stderr, "Error: select: %s\n", netstrerror());

	__pmAFunblock();

	if (target_pid && !__pmProcessExists(target_pid))
	    exit(EXIT_SUCCESS);

	if (exit_code)
	    break;
    }
    exit(exit_code);
}
Esempio n. 12
0
File: pdu.c Progetto: goodwinos/pcp
static int
pduread(int fd, char *buf, int len, int mode, int timeout)
{
    /*
     * handle short reads that may split a PDU ...
     */
    int				status = 0;
    int				have = 0;
    __pmFdSet			onefd;
    static int			done_default = 0;
    static struct timeval	def_wait = { 10, 0 };

    if (timeout == TRACE_TIMEOUT_DEFAULT) {
	if (!done_default) {
	    double	def_timeout;
	    char	*timeout_str;
	    char	*end_ptr;

	    if ((timeout_str = getenv(TRACE_ENV_REQTIMEOUT)) != NULL) {
		def_timeout = strtod(timeout_str, &end_ptr);
		if (*end_ptr != '\0' || def_timeout < 0.0) {
		    status = PMTRACE_ERR_ENVFORMAT;
		    return status;
		}
		else {
		    pmtimevalFromReal(def_timeout, &def_wait);
		}
	    }
	    done_default = 1;
	}
    }

    while (len) {
	struct timeval	wait;
	/*
	 * either never timeout (i.e. block forever), or timeout
	 */
	if (timeout != TRACE_TIMEOUT_NEVER) {
	    if (timeout > 0) {
		wait.tv_sec = timeout;
		wait.tv_usec = 0;
	    }
	    else
		wait = def_wait;
	    __pmFD_ZERO(&onefd);
	    __pmFD_SET(fd, &onefd);
	    status = __pmSelectRead(fd+1, &onefd, &wait);
	    if (status == 0)
		return PMTRACE_ERR_TIMEOUT;
	    else if (status < 0) {
		setoserror(neterror());
		return status;
	    }
	}
	status = (int)__pmRead(fd, buf, len);
	if (status <= 0) {	/* EOF or error */
	    setoserror(neterror());
	    return status;
	}
	if (mode == -1)
	    /* special case, see __pmtracegetPDU */
	    return status;
	have += status;
	buf += status;
	len -= status;
    }

    return have;
}
Esempio n. 13
0
int
conn_cisco(cisco_t * cp)
{
    __pmFdSet		wfds;
    __pmSockAddr	*myaddr;
    void		*enumIx;
    int			flags = 0;
    int			fd;
    int			ret;

    fd = -1;
    enumIx = NULL;
    for (myaddr = __pmHostEntGetSockAddr(cp->hostinfo, &enumIx);
	 myaddr != NULL;
	 myaddr = __pmHostEntGetSockAddr(cp->hostinfo, &enumIx)) {
	/* Create a socket */
	if (__pmSockAddrIsInet(myaddr))
	    fd = __pmCreateSocket();
	else if (__pmSockAddrIsIPv6(myaddr))
	    fd = __pmCreateIPv6Socket();
	else
	    fd = -1;

	if (fd < 0) {
	    __pmSockAddrFree(myaddr);
	    continue; /* Try the next address */
	}

	/* Attempt to connect */
	flags = __pmConnectTo(fd, myaddr, cp->port);
	__pmSockAddrFree(myaddr);

	if (flags < 0) {
	    /*
	     * Mark failure in case we fall out the end of the loop
	     * and try next address. fd has been closed in __pmConnectTo().
	     */
	    setoserror(ECONNREFUSED);
	    fd = -1;
	    continue;
	}

	/* FNDELAY and we're in progress - wait on select */
	__pmFD_ZERO(&wfds);
	__pmFD_SET(fd, &wfds);
	ret = __pmSelectWrite(fd+1, &wfds, NULL);

	/* Was the connection successful? */
	if (ret == 0)
	    setoserror(ETIMEDOUT);
	else if (ret > 0) {
	    ret = __pmConnectCheckError(fd);
	    if (ret == 0)
		break;
	    setoserror(ret);
	}
	
	/* Unsuccessful connection. */
	__pmCloseSocket(fd);
	fd = -1;
    } /* loop over addresses */

    if (fd == -1) {
	fprintf(stderr, "conn_cisco(%s): connect: %s\n",
		cp->host, netstrerror());
	return -1;
    }

    fd = __pmConnectRestoreFlags(fd, flags);
    if (fd < 0) {
	fprintf(stderr, "conn_cisco(%s): setsockopt: %s\n",
		cp->host, netstrerror());
	return -1;
    }

    return fd;
}
Esempio n. 14
0
File: trace.c Progetto: tongfw/pcp
static int
_pmauxtraceconnect(void)
{
    int			port = TRACE_PORT;
    char		hostname[MAXHOSTNAMELEN];
    struct timeval	timeout = { 3, 0 };     /* default 3 secs */
    __pmSockAddr	*myaddr;
    __pmHostEnt		*servinfo;
    void		*enumIx;
#ifndef IS_MINGW
    struct itimerval	_pmolditimer;
    void		(*old_handler)(int foo);
#endif
    int			rc, sts;
    int			flags = 0;
    char		*sptr, *endptr, *endnum;
    struct timeval	canwait = { 5, 000000 };
    struct timeval	stv;
    struct timeval	*pstv;
    __pmFdSet		wfds;

#ifdef PMTRACE_DEBUG
    if (__pmstate & PMTRACE_STATE_NOAGENT) {
	fprintf(stderr, "_pmtraceconnect: connecting to PMDA (skipped)\n");
	return 0;
    }
    else if (__pmstate & PMTRACE_STATE_COMMS)
	fprintf(stderr, "_pmtraceconnect: connecting to PMDA ...\n");
#endif

    /*
     * get optional stuff from environment ...
     *  PCP_TRACE_HOST, PCP_TRACE_PORT, PCP_TRACE_TIMEOUT, and
     *  PCP_TRACE_NOAGENT
     */
    if ((sptr = getenv(TRACE_ENV_HOST)) != NULL)
	strcpy(hostname, sptr);
    else {
       (void)gethostname(hostname, MAXHOSTNAMELEN);
       hostname[MAXHOSTNAMELEN-1] = '\0';
    }
    if ((sptr = getenv(TRACE_ENV_PORT)) != NULL) {
	port = (int)strtol(sptr, &endnum, 0);
	if (*endnum != '\0' || port < 0) {
	    fprintf(stderr, "trace warning: bad PCP_TRACE_PORT ignored.");
	    port = TRACE_PORT;
	}
    }
    if ((sptr = getenv(TRACE_ENV_TIMEOUT)) != NULL) {
	double timesec = strtod(sptr, &endptr);
	if (*endptr != '\0' || timesec < 0.0)
	    fprintf(stderr, "trace warning: bogus PCP_TRACE_TIMEOUT.");
	else {
	    timeout.tv_sec = (time_t)timesec;
	    timeout.tv_usec = (int)((timesec - (double)timeout.tv_sec)*1000000);
	}
    }
    if (getenv(TRACE_ENV_NOAGENT) != NULL)
	__pmstate |= PMTRACE_STATE_NOAGENT;

    if ((servinfo = __pmGetAddrInfo(hostname)) == NULL) {
#ifdef PMTRACE_DEBUG
	if (__pmstate & PMTRACE_STATE_COMMS)
	    fprintf(stderr, "_pmtraceconnect(__pmGetAddrInfo(hostname=%s): "
		    "hosterror=%d, ``%s''\n", hostname, hosterror(),
		    hoststrerror());
#endif
	return -EHOSTUNREACH;
    }

    /* Try each address in turn until one connects. */
    sts = EHOSTUNREACH;
    __pmfd = -1;
    enumIx = NULL;
    for (myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx);
	 myaddr != NULL;
	 myaddr = __pmHostEntGetSockAddr(servinfo, &enumIx)) {
	/* Create a socket */
	if (__pmSockAddrIsInet(myaddr))
	    __pmfd = __pmCreateSocket();
	else if (__pmSockAddrIsIPv6(myaddr))
	    __pmfd = __pmCreateIPv6Socket();
	else {
	    fprintf(stderr, "_pmtraceconnect(invalid address family): %d\n",
		    __pmSockAddrGetFamily(myaddr));
	}
	if (__pmfd < 0) {
	    sts = neterror();
	    __pmSockAddrFree(myaddr);
	    continue; /* Try the next address */
	}

	/* Set the port. */
	__pmSockAddrSetPort(myaddr, port);

#ifndef IS_MINGW
	/* arm interval timer */
	_pmmyitimer.it_value.tv_sec = timeout.tv_sec;
	_pmmyitimer.it_value.tv_usec = timeout.tv_usec;
	_pmmyitimer.it_interval.tv_sec = 0;
	_pmmyitimer.it_interval.tv_usec = 0;
	old_handler = signal(SIGALRM, _pmtracealarm);
	setitimer(ITIMER_REAL, &_pmmyitimer, &_pmolditimer);
#endif

#ifdef PMTRACE_DEBUG
	if (__pmstate & PMTRACE_STATE_COMMS) {
	    char *name = __pmHostEntGetName (servinfo);
	    fprintf(stderr, "_pmtraceconnect: PMDA host=%s port=%d timeout=%d"
		    "secs\n", name == NULL ? "unknown" : name, port, (int)timeout.tv_sec);
	    if (name != NULL)
		free(name);
	}
#endif

	/* Attempt to connect */
	flags = __pmConnectTo(__pmfd, myaddr, port);
	__pmSockAddrFree(myaddr);

	if (flags < 0) {
	    /*
	     * Mark failure in case we fall out the end of the loop
	     * and try next address. __pmfd has been closed in __pmConnectTo().
	     */
	    sts = -flags;
	    __pmfd = -1;
	    continue;
	}

	/* FNDELAY and we're in progress - wait on select */
	stv = canwait;
	pstv = (stv.tv_sec || stv.tv_usec) ? &stv : NULL;
	__pmFD_ZERO(&wfds);
	__pmFD_SET(__pmfd, &wfds);
	if ((rc = __pmSelectWrite(__pmfd+1, &wfds, pstv)) == 1) {
	    sts = __pmConnectCheckError(__pmfd);
	}
	else if (rc == 0) {
	    sts = ETIMEDOUT;
	}
	else {
	    sts = (rc < 0) ? neterror() : EINVAL;
	}
 
#ifndef IS_MINGW
	/* re-arm interval timer */
	setitimer(ITIMER_REAL, &off_itimer, &_pmmyitimer);
	signal(SIGALRM, old_handler);
	if (_pmolditimer.it_value.tv_sec != 0 && _pmolditimer.it_value.tv_usec != 0) {
	    _pmolditimer.it_value.tv_usec -= timeout.tv_usec - _pmmyitimer.it_value.tv_usec;
	    while (_pmolditimer.it_value.tv_usec < 0) {
		_pmolditimer.it_value.tv_usec += 1000000;
		_pmolditimer.it_value.tv_sec--;
	    }
	    while (_pmolditimer.it_value.tv_usec > 1000000) {
		_pmolditimer.it_value.tv_usec -= 1000000;
		_pmolditimer.it_value.tv_sec++;
	    }
	    _pmolditimer.it_value.tv_sec -= timeout.tv_sec - _pmmyitimer.it_value.tv_sec;
	    if (_pmolditimer.it_value.tv_sec < 0) {
		/* missed the user's itimer, pretend there is 1 msec to go! */
		_pmolditimer.it_value.tv_sec = 0;
		_pmolditimer.it_value.tv_usec = 1000;
	    }
	    setitimer(ITIMER_REAL, &_pmolditimer, &_pmmyitimer);
	}
#endif

	/* Was the connection successful? */
	if (sts == 0)
	    break;

	/* Unsuccessful connection. */
	__pmCloseSocket(__pmfd);
	__pmfd = -1;
    } /* loop over addresses */

    __pmHostEntFree(servinfo);

    /* Was the connection successful? */
    if (__pmfd < 0) {
#ifdef PMTRACE_DEBUG
	if (__pmstate & PMTRACE_STATE_COMMS)
	    fprintf(stderr, "_pmtraceconnect(socket failed): %s\n",
		    netstrerror());
#endif
	return -sts;
    }

    _pmtimedout = 0;

    /* Restore the original file status flags. */
    if (__pmSetFileStatusFlags(__pmfd, flags) < 0) {
#ifdef PMTRACE_DEBUG
	if (__pmstate & PMTRACE_STATE_COMMS)
	    fprintf(stderr, ":_pmtraceconnect: cannot restore file status flags\n");
#endif
	return -oserror();
    }

    /* make sure this file descriptor is closed if exec() is called */
    if ((flags = __pmGetFileDescriptorFlags(__pmfd)) != -1)
	sts = __pmSetFileDescriptorFlags(__pmfd, flags | FD_CLOEXEC);
    else
	sts = -1;
    if (sts == -1)
	return -oserror();

    if (__pmtraceprotocol(TRACE_PROTOCOL_QUERY) == TRACE_PROTOCOL_ASYNC) {
	/* in the asynchronoous protocol - ensure no delay after close */
	if ((flags = __pmGetFileStatusFlags(__pmfd)) != -1)
	    sts = __pmSetFileStatusFlags(__pmfd, flags | FNDELAY);
	else
	    sts = -1;
	if (sts == -1)
	    return -oserror();
#ifdef PMTRACE_DEBUG
	if (__pmstate & PMTRACE_STATE_COMMS)
	    fprintf(stderr, "_pmtraceconnect: async protocol setup complete\n");
#endif
    }
    else
#ifdef PMTRACE_DEBUG
	if (__pmstate & PMTRACE_STATE_COMMS)
	    fprintf(stderr, "_pmtraceconnect: sync protocol setup complete\n");
#endif

    /* trace PMDA sends an ACK on successful connect */
    sts = _pmtracegetack(sts, 0);

    return sts;
}
Esempio n. 15
0
static void
ClientLoop(void)
{
    int		i, fd, sts;
    int		maxFd;
    int		checkAgents;
    int		reload_ns = 0;
    __pmFdSet	readableFds;

    for (;;) {

	/* Figure out which file descriptors to wait for input on.  Keep
	 * track of the highest numbered descriptor for the select call.
	 */
	readableFds = clientFds;
	maxFd = maxClientFd + 1;

	/* If an agent was not ready, it may send an ERROR PDU to indicate it
	 * is now ready.  Add such agents to the list of file descriptors.
	 */
	checkAgents = 0;
	for (i = 0; i < nAgents; i++) {
	    AgentInfo	*ap = &agent[i];

	    if (ap->status.notReady) {
		fd = ap->outFd;
		__pmFD_SET(fd, &readableFds);
		if (fd > maxFd)
		    maxFd = fd + 1;
		checkAgents = 1;
		if (pmDebug & DBG_TRACE_APPL0)
		    __pmNotifyErr(LOG_INFO,
				 "not ready: check %s agent on fd %d (max = %d)\n",
				 ap->pmDomainLabel, fd, maxFd);
	    }
	}

	sts = __pmSelectRead(maxFd, &readableFds, NULL);
	if (sts > 0) {
	    if (pmDebug & DBG_TRACE_APPL0)
		for (i = 0; i <= maxClientFd; i++)
		    if (__pmFD_ISSET(i, &readableFds))
			fprintf(stderr, "DATA: from %s (fd %d)\n",
				FdToString(i), i);
	    __pmServerAddNewClients(&readableFds, CheckNewClient);
	    if (checkAgents)
		reload_ns = HandleReadyAgents(&readableFds);
	    HandleClientInput(&readableFds);
	}
	else if (sts == -1 && neterror() != EINTR) {
	    __pmNotifyErr(LOG_ERR, "ClientLoop select: %s\n", netstrerror());
	    break;
	}
	if (restart) {
	    restart = 0;
	    reload_ns = 1;
	    SignalRestart();
	}
	if (reload_ns) {
	    reload_ns = 0;
	    SignalReloadPMNS();
	}
	if (timeToDie) {
	    SignalShutdown();
	    break;
	}
	if (AgentDied) {
	    AgentDied = 0;
	    for (i = 0; i < nAgents; i++) {
		if (!agent[i].status.connected)
		    mapdom[agent[i].pmDomainId] = nAgents;
	    }
	}
    }
}
Esempio n. 16
0
/* Establish a new socket connection to a client */
ClientInfo *
AcceptNewClient(int reqfd)
{
    int		i;
    int		fd;
    __pmSockLen	addrlen;
    int		ok = 0;
    char	buf[MY_BUFLEN];
    char	*bp;
    char	*endp;
    char	*abufp;

    i = NewClient();
    addrlen = __pmSockAddrSize();
    fd = __pmAccept(reqfd, client[i].addr, &addrlen);
    if (fd == -1) {
	__pmNotifyErr(LOG_ERR, "AcceptNewClient(%d) __pmAccept failed: %s",
			reqfd, netstrerror());
	Shutdown();
	exit(1);
    }
    __pmSetSocketIPC(fd);
    if (fd > maxSockFd)
	maxSockFd = fd;
    __pmFD_SET(fd, &sockFds);

    client[i].fd = fd;
    client[i].pmcd_fd = -1;
    client[i].status.connected = 1;
    client[i].status.allowed = 0;
    client[i].pmcd_hostname = NULL;

    /*
     * version negotiation (converse to negotiate_proxy() logic in
     * libpcp
     *
     *   __pmRecv client version message
     *   __pmSend my server version message
     *   __pmRecv pmcd hostname and pmcd port
     */
    for (bp = buf; bp < &buf[MY_BUFLEN]; bp++) {
	if (__pmRecv(fd, bp, 1, 0) != 1) {
	    *bp = '\0';		/* null terminate what we have */
	    bp = &buf[MY_BUFLEN];	/* flag error */
	    break;
	}
	/* end of line means no more ... */
	if (*bp == '\n' || *bp == '\r') {
	    *bp = '\0';
	    break;
	}
    }
    if (bp < &buf[MY_BUFLEN]) {
	/* looks OK so far ... is this a version we can support? */
	if (strcmp(buf, "pmproxy-client 1") == 0) {
	    client[i].version = 1;
	    ok = 1;
	}
    }

    if (!ok) {
#ifdef PCP_DEBUG
	if (pmDebug & DBG_TRACE_CONTEXT) {
	    abufp = __pmSockAddrToString(client[i].addr);
	    __pmNotifyErr(LOG_INFO, "Bad version string from client at %s",
			abufp);
	    free(abufp);
	    fprintf(stderr, "AcceptNewClient: bad version string was \"");
	    for (bp = buf; *bp && bp < &buf[MY_BUFLEN]; bp++)
		fputc(*bp & 0xff, stderr);
	    fprintf(stderr, "\"\n");
	}
#endif
	DeleteClient(&client[i]);
	return NULL;
    }

    if (__pmSend(fd, MY_VERSION, strlen(MY_VERSION), 0) != strlen(MY_VERSION)) {
	abufp = __pmSockAddrToString(client[i].addr);
	__pmNotifyErr(LOG_WARNING, "AcceptNewClient: failed to send version "
			"string (%s) to client at %s\n", MY_VERSION, abufp);
	free(abufp);
	DeleteClient(&client[i]);
	return NULL;
    }

    for (bp = buf; bp < &buf[MY_BUFLEN]; bp++) {
	if (__pmRecv(fd, bp, 1, 0) != 1) {
	    *bp = '\0';		/* null terminate what we have */
	    bp = &buf[MY_BUFLEN];	/* flag error */
	    break;
	}
	/* end of line means no more ... */
	if (*bp == '\n' || *bp == '\r') {
	    *bp = '\0';
	    break;
	}
    }
    if (bp < &buf[MY_BUFLEN]) {
	/* looks OK so far ... get hostname and port */
	for (bp = buf; *bp && *bp != ' '; bp++)
	    ;
	if (bp != buf) {
	    *bp = '\0';
	    client[i].pmcd_hostname = strdup(buf);
	    if (client[i].pmcd_hostname == NULL)
		__pmNoMem("PMCD.hostname", strlen(buf), PM_FATAL_ERR);
	    bp++;
	    client[i].pmcd_port = (int)strtoul(bp, &endp, 10);
	    if (*endp != '\0') {
		abufp = __pmSockAddrToString(client[i].addr);
		__pmNotifyErr(LOG_WARNING, "AcceptNewClient: bad pmcd port "
				"\"%s\" from client at %s", bp, abufp);
		free(abufp);
		DeleteClient(&client[i]);
		return NULL;
	    }
	}
	/* error, fall through */
    }

    if (client[i].pmcd_hostname == NULL) {
	abufp = __pmSockAddrToString(client[i].addr);
	__pmNotifyErr(LOG_WARNING, "AcceptNewClient: failed to get PMCD "
				"hostname (%s) from client at %s", buf, abufp);
	free(abufp);
	DeleteClient(&client[i]);
	return NULL;
    }

#ifdef PCP_DEBUG
    if (pmDebug & DBG_TRACE_CONTEXT) {
	/*
	 * note error message gets appended to once pmcd connection is
	 * made in ClientLoop()
	 */
	abufp = __pmSockAddrToString(client[i].addr);
	fprintf(stderr, "AcceptNewClient [%d] fd=%d from %s to %s (port %s)",
		i, fd, abufp, client[i].pmcd_hostname, bp);
	free(abufp);
    }
#endif

    return &client[i];
}