int main()
{
// default output
int output = -1;
// main i/o-loop
for(int i=1; i < 6; ++i)
{
// read input
int input = nse_symbolic_int();
if(input == 1) {
} else if(input == 2) {
} else if(input == 3) {
} else if(input == 4) {
} else if(input == 5) {
} else {
input = 6;
}
// operate eca engine
output = calculate_output(input);
}
return 0;
}
int main() {
struct timeval t0, t1;
int temp, g, i;
double* y = (double*) malloc(sizeof (double)*nb_snapshot);
//double mod1, mod2;
int elapsed;
//preparation du radar
double *matrice_real = (double*) malloc(sizeof (double) * nb_sensor * nb_theta);
double *matrice_img = (double*) malloc(sizeof (double) * nb_sensor * nb_theta);
double *theta_radar = (double*) malloc(sizeof (double) * nb_theta);
double *aux_real = (double*) malloc(sizeof (double)*nb_theta);
double *aux_img = (double*) malloc(sizeof (double)*nb_theta);
double *snapshot_real = (double*) malloc(sizeof (double)*nb_sensor * nb_snapshot);
double *snapshot_img = (double*) malloc(sizeof (double)*nb_sensor * nb_snapshot);
initialize_radar(theta_radar, (double(*)[nb_sensor])matrice_real, (double(*)[nb_sensor]) matrice_img);
calculate_snapshot((double(*)[nb_sensor])snapshot_real, (double(*)[nb_sensor])snapshot_img);
gettimeofday(&t0, 0);
for (g = 0; g < nb_snapshot; g++) {
/* double* t=(double(*))snapshot_real + nb_sensor*g;
for(i=0;i<nb_sensor;i++)
printf("%d *** %lf\n",g,t[i]);*/
temp = calculate_output(aux_real, aux_img, (double(*)[nb_sensor])matrice_real, (double(*)[nb_sensor])matrice_img, (double(*))snapshot_real + nb_sensor*g, (double(*))snapshot_img + nb_sensor * g);
/* temp = 0;
for (i = 1; i < nb_theta; i++) {
mod1 = pow(aux_real[i], 2) + pow(aux_img[i], 2);
mod2 = pow(aux_real[temp], 2) + pow(aux_img[temp], 2);
temp = (mod1 >= mod2) ? i : temp;
// mod2 = (mod1 >= mod2) ? mod2 = pow(aux_real[temp], 2) + pow(aux_img[temp], 2) : mod2;
if (mod1 >= mod2) {
temp = i;
mod2 = pow(aux_real[temp], 2) + pow(aux_img[temp], 2);
}
}*/
y[g] = (-90. + temp * 180. / nb_theta);
}
gettimeofday(&t1, 0);
// for (i = 0; i < nb_snapshot; i++) {
// printf("%lf\n", y[i]);
// }
elapsed = (t1.tv_sec - t0.tv_sec) * 1000000 + t1.tv_usec - t0.tv_usec;
printf("Elapsed time: %.3f ms\n", ((float) elapsed) / (1000.));
return (EXIT_SUCCESS);
}
int main()
{
int input;
scanf("%d",&input);
int output;
output = calculate_output(input);
printf("%d",output);
return 0;
}
int main()
{
int output = -1;
while(1)
{
int input;
scanf("%d", &input);
output = calculate_output(input);
printf("%d\n", output);
}
}
int main()
{
int output = -1;
{
int input;
scanf("%d", &input);
output = calculate_output(input);
if(output == -2) fprintf(stderr, "Invalid input: %d\n", input);
printf("%d\n", output);
}
}
double CompressorEffect::calculate_gain(double input)
{
// double x_db = DB::todb(input);
// double y_db = config.calculate_db(x_db);
// double y_linear = DB::fromdb(y_db);
double y_linear = calculate_output(input);
double gain;
if(input != 0)
gain = y_linear / input;
else
gain = 100000;
return gain;
}
int main() {
int output = -1;
while(1) {
int input;
scanf("%d", &input);
output = calculate_output(input);
printf("%d\n", output);
// State={(a1,1), (output,22), (input,top)}, constraints={input==3}
// State={(a1,1), (output,23), (input,top)}, constraints={input==2}
// State={(a1,1), (output,23), (input,top)}, constraints={input!=2,input!=3,input!=4}
}
return 0;
}
int main()
{
//srand((unsigned)time(NULL));
// main i/o-loop
while(1)
{
// read input
int input;
scanf("%d", &input);
// operate eca engine
calculate_output(input);
}
}
int main()
{
// default output
int output = -1;
// main i/o-loop
// while(1)
{
// read input
int input;
// operate eca engine
output = calculate_output(input);
}
}
int main()
{
// default output
int output = -1;
// main i/o-loop
while(1)
{
// read input
int input;
input = __VERIFIER_nondet_int();
if ((input != 2) && (input != 3) && (input != 4) && (input != 5) && (input != 6)) return -2;
// operate eca engine
output = calculate_output(input);
}
}
int main()
{
// default output
output = -1;
// main i/o-loop
while(1)
{
// read input
input = __VERIFIER_nondet_int();
__VERIFIER_assume(input >= 1 && input <= 6);
// operate eca engine
output = calculate_output(input);
}
}
int main()
{
// default output
int output = -1;
// main i/o-loop
while(1)
{
// read input
int input;
scanf("%d", &input);
// operate eca engine
output = calculate_output(input);
if(output == -2)
fprintf(stderr, "Invalid input: %d\n", input);
else if(output != -1)
printf("%d\n", output);
}
}
int main()
{
// default output
int output = -1;
// main i/o-loop
while(1)
{
// read input
int input = __VERIFIER_nondet_int();
if(input == 1) {
} else if(input == 2) {
} else if(input == 3) {
} else if(input == 4) {
} else if(input == 5) {
} else {
input = 6;
}
// operate eca engine
output = calculate_output(input);
}
}
/////////////////////////////////////////////////////////////////////////////////////////////
//int main(int argc, char *argv[ ])
//{
int main(void)
{
sortingindex = 0;
if((fpp = fopen(INPUT_FILE, "r")) == NULL)
{
printf("Cannot open 'parameter_file'.\n");
}
for(j = 0; j < 11; j++)
{
if(fscanf(fpp, "%lf", &tmp) != EOF)
{
my_array[j] = tmp;
} else {
printf("Not enough data in 'input_parameter'!");
}
}
fclose(fpp);
In_n= (int) my_array[0];
In_vect_n= (int) my_array[1];
Out_n= (int) my_array[2];
Mf_n= (int) my_array[3];
training_data_n= (int) my_array[4];
checking_data_n= (int) my_array[5];
epoch_n= (int) my_array[6];
step_size=my_array[7];
increase_rate=my_array[8];
decrease_rate=my_array[9];
threshold = my_array[10];
Rule_n = (int)pow((double)Mf_n, (double)In_n); //number of rules
Node_n = In_n + In_n*Mf_n + 3*Rule_n + In_n*Rule_n + Out_n;
/* allocate matrices and memories */
int trnnumcheck[training_data_n + 1];
int trnnumchecku[training_data_n + 1];
for(i=0; i<training_data_n +1; i++)
{
trnnumcheck[i]=0;
trnnumchecku[i]=0;
}
diff =(double **)create_matrix(Out_n, training_data_n, sizeof(double));
double chkvar[checking_data_n];
double cdavg[checking_data_n];
double chkvar_un[checking_data_n];
double cdavg_un[checking_data_n];
target = calloc(Out_n, sizeof(double));
de_out = calloc(Out_n, sizeof(double));
node_p = (NODE_T **)create_array(Node_n, sizeof(NODE_T *));
config = (int **)create_matrix(Node_n, Node_n, sizeof(int));
training_data_matrix = (double **)create_matrix(training_data_n, In_n*In_vect_n + Out_n, sizeof(double));
if(checking_data_n > 0)
{
checking_data_matrix = (double **)create_matrix(checking_data_n, In_n*In_vect_n +Out_n, sizeof(double));
checking_data_matrix_un = (double **)create_matrix(checking_data_n, Out_n, sizeof(double));
chk_output = (double **)create_matrix(checking_data_n, Out_n, sizeof(double));
}
layer_1_to_4_output = (COMPLEX_T **)create_matrix(training_data_n, In_n*Mf_n + 3*Rule_n, sizeof(COMPLEX_T));
trn_rmse_error = calloc(epoch_n, sizeof(double));
trnNMSE = calloc(epoch_n, sizeof(double));
chk_rmse_error = calloc(epoch_n, sizeof(double));
kalman_parameter = (double **)create_matrix(Out_n ,(In_n*In_vect_n + 1)*Rule_n, sizeof(double));
kalman_data = (double **)create_matrix(Out_n ,(In_n*In_vect_n + 1)*Rule_n, sizeof(double));
step_size_array = calloc(epoch_n, sizeof(double));
ancfis_output = (double **)create_matrix(training_data_n , Out_n, sizeof(double));
trn_error =calloc(Out_n +1, sizeof(double));
chk_error_n = calloc(Out_n +1, sizeof(double));// changing size for adding new error measures
chk_error_un = calloc(Out_n +1, sizeof(double));// changing size for adding new error measures
trn_datapair_error = calloc(training_data_n, sizeof(double));
trn_datapair_error_sorted = (double **)create_matrix(2,training_data_n, sizeof(double));
NMSE = calloc(Out_n, sizeof(double));
NDEI = calloc(Out_n, sizeof(double));
unNMSE = calloc(Out_n, sizeof(double));
unNDEI = calloc(Out_n, sizeof(double));
//Build Matrix of 0 nd 1 to show the connected nodes
gen_config(In_n, Mf_n,Out_n, config);//gen_config.c
//With the above matrix, build ANCFIS connected nodes
build_ancfis(config); //datastru.c
//Find total number of nodes in layer 1 and 5
parameter_n = set_parameter_mode(); //datastru.c
parameter_array = calloc(parameter_n, sizeof(double));
initpara(TRAIN_DATA_FILE, training_data_n, In_n, In_vect_n+1, Mf_n); // initpara.c
// after this step, the parameters (they are present in layer 1 and layer 5 only) are assigned a random initial value
// using some basic algebra and these value are then stored in "para.ini"
get_parameter(node_p,Node_n,INIT_PARA_FILE); //input.c
// after this step, the initial random values of the parametrs are read from "oara.ini" and assigned to the appropriate nodes in the node structure by accessing their para list.
//Get training and testing data
get_data(TRAIN_DATA_FILE, training_data_n, training_data_matrix); //input.c
// after this step, the training input data is read from the "data.trn" fle and stroed in the training data matrix.
get_data(CHECK_DATA_FILE, checking_data_n, checking_data_matrix); //input.c
// after the above step, the checking data is read from the "data.chk" file and then stored in the checking data matrix.
for(i=0; i< Out_n; i++)
{
for(j=0; j<training_data_n; j++)
{
trnavg = trnavg + training_data_matrix[j][(i+1)*In_vect_n +i];
}
}
trnavg = trnavg /(Out_n * training_data_n);
for(i=0; i< Out_n; i++)
{
for(j=0; j<training_data_n; j++)
{
temp = training_data_matrix[j][(i+1)*In_vect_n +i]- trnavg;
temp = temp*temp;
trnvariance = trnvariance + temp;
}
}
trnvariance = trnvariance /((Out_n * training_data_n)-1);
temp = 0.0;
for(i=0; i< Out_n; i++)
{
for(j=0; j< checking_data_n; j++)
{
chkavg = chkavg + checking_data_matrix[j][(i+1)*In_vect_n +i];
}
}
chkavg = chkavg /(Out_n * checking_data_n);
for(i=0; i< Out_n; i++)
{
for(j=0; j<checking_data_n; j++)
{
temp = checking_data_matrix[j][(i+1)*In_vect_n +i]- chkavg;
temp = temp*temp;
chkvariance = chkvariance + temp;
}
}
chkvariance = chkvariance /((Out_n * checking_data_n)-1);
printf("epochs \t trn error \t tst error\n");
printf("------ \t --------- \t ---------\n");
//printf("not entering the epoch loop and the i loop yoyoyo\n");
/**************
for(ep_n = 0; ep_n < epoch_n; ep_n++)
{
//step_size_pointer= &step_size;
//printf("epoch numbernumber %d \n", ep_n);
//step_size_array[ep_n] = step_size_pointer;
step_size_array[ep_n] = step_size;
// after the above step, the updated stepsize at the end of the last loop is stored in the step_size_array.
// this will keep happening every time we start en epoch and hence at the end of the loop, step_size_array will
// have a list of all the updated step sizes. Since this is a offline version, step sizes are updated only
// at the end of an epoch.
for(m = 0; m < Out_n; m++)
{
//printf("m loop number %d \n", m);
for(j = 0; j < training_data_n; j++)
{
//printf("j loop number %d \n", j);
//copy the input vector(s) to input node(s)
put_input_data(node_p,j, training_data_matrix); //input.c
// after this(above) step, the input data is transferred frm the training data matrix to the "node" structure.
//printf("testing \n");
//printf("reeeetesting \n");
target[m] = training_data_matrix[j][(m+1)*In_vect_n+m]; // ***
// this step assigns the value of the "m"th output of "j" th trainig data pair to target.
//printf("testing \n");
//forward pass, get node outputs from layer 1 to layer 4
calculate_output(In_n, In_n + In_n*Mf_n + 3*Rule_n - 1, j); //forward.c
// after this step, output of nodes in layer 1 to 4 is calculated. Please note that when this happens for the first
// time, i.e. when ep_n=0, our network parametrs are already initialized. thus, it is possible to get the
// output of each node using the function definitios proposed in forward.c. After first epoch, our parametrs get
// updated and this output is then calculated using teh new parameters. The essential point to note here is that
// we can always calculate the output of each node since we have already initialized our parameters.
//printf("testing \n");
//put outputs of layer 1 to 4 into layer_1_to_4_output
for(k = 0; k < Mf_n*In_n + 3*Rule_n; k++)
{
//printf("testing \n");
layer_1_to_4_output[j][k] = *node_p[k + In_n]->value;
}
// the above loop simply puts the values of nodes from layer 1 to layer 4 in the layer_1_to_4_output matrix.
//identify layer 5 params using LSE (Kalman filter)
//printf("testing \n");
get_kalman_data(kalman_data, target); //kalman.c
// this function call finds out the values of O4iXnl .. these are basically the coefficients
// of the kalman parametrs for a given training data pair
//puts them in kalman_data matrix.
// this kalman_data matrix has In_n number of rows and number of columns equal to number of parametrs that are
// responsible for determining each output... as stated above, the outputs are actually the coefficients of the
// parameters.
//printf("testing \n");
//calculate Kalman parameters
kalman(ep_n, j+(m*training_data_n), m, kalman_data, kalman_parameter,target); //kalman.c
// this function call evaluates kalman parametrs for a given output, for a given epoch.. that is it takes the epoch
// number from us, takes the info about how many times has kalman been invoked before, also takes in the
// output number(row number) for whihc the parametrs are to be found out... it also takes kalman_data and reads
// from it to estimate the kalman parameters... it also takes target .. and stores the output in the mth row of
// kalman_parameter.
//printf("testing \n");
}
// let me tell u what the abopve loop is doing.. after observing closely, it is easy to see that in the above loop,
// for a given output node, one by one, all the training data are taken inside the ANCFIS structure, outputs
// are calculated from one to 4, then a recursive kalman filetr is used to identify the kalman
// parametrs corresponding to the output node.. these kalman parameters are updated after every tarining data pair
// and finally at the end of all the training data, we have an estimate for the kalman parametrs corresponding to // the output node.
}
// thus, at the of the above loop, the kalman parametrs for all the output nodes are evaluated...
// now, we are ready to actually calculate the outputs.. plase remember that, all this while, the actual
// values of the parametrs of nodes in layer 1 and layer 5 are the ones that were randomly initialized.
for(j = 0; j < training_data_n; j++)
{
//printf("testing 1\n");
put_input_data(node_p,j, training_data_matrix); //input.c
//printf("testing 2 \n");
for(k = 0; k < Mf_n*In_n + 3*Rule_n; k++)
{
*node_p[k + In_n]->value = layer_1_to_4_output[j][k];
}
// u must be able to see that in the above two loops, each time, whatever output we got for a given training
// datta pair, it was safely stored in layer_1_to_4 array...and each time, the value on the actual nodes in the
// structure got changed.. due to new incoming training data pair..this was periodic with period trainingdata_n..
// that is for each output node, we got the same results for a given training dat aapir.. that is the node values
// were independent of m. Now, for a given traing data pair, we are getting those value back in the actual node
// node structure from that laye blh blah matrix..
//printf("testing 3\n");
put_kalman_parameter(Out_n,kalman_parameter); //kalman.c
// using this function call, we are placing the setimated value of the layer 5 parametrs in the node structure
// by accessing each node and its parameter list.
// Do forward pass for L5 and L6
calculate_output(In_n + In_n*Mf_n + 3*Rule_n, Node_n, j); //forward.c
// for a given value of the training data pair, this function calculates the output of layer 5 and layer 6 nodes
// and places them in the node structure.
calculate_root(training_data_matrix,diff,j,node_p); //debug.c
// this function call calculates the square of the erro between the predicted value of an output node and the
// corresponding actual value in the training data matrix..(actual output) and stores it in diff.
// this call performs the above action for a given training data pair and for all output nodes.
// Do backward pass and calculate all error rate for each node
calculate_de_do(j,Out_n,target,ancfis_output); //backward.c
// calculates de_do for each node fora given training data pair
update_de_dp(j); //de_dp.c
// updates de_do for each node....
}
// thus at the end of this loop, estimated outputs for all the training data are calculated..also back propogatin
// is done and de_dp for all the nodes is updated.
//printf("testing 1\n");
calculate_trn_err(diff,trn_error,trn_datapair_error,training_data_n); //debug.c
//printf("testing 2 \n");
//training_error_measure(target,ancfis_output,diff, training_data_n, trn_error,out_n); //trn_err.c
trn_rmse_error[ep_n] = trn_error[Out_n];
printf("%3d \t %.11f \n", ep_n+1, trn_error[Out_n]);
//Find RMSE of testing error
/************************************* if(checking_data_n != 0)
{
printf("testing 3 \n");
epoch_checking_error(checking_data_matrix, checking_data_n, chk_error, training_data_n, chk_output, ep_n); //chk_err.c writes to tracking.txt
printf("testing 4 \n");
chk_rmse_error[ep_n] = chk_error[Out_n];
for (i=0; i<Out_n; i++)
//printf("%3d \t %.11f \t %.11f\n", ep_n+1, trn_error[i], chk_error[i]);
printf("%3d \t %.11f \n", ep_n+1, trn_error[i]);
//printf("%.11f\t %.11f\n", trn_error[Out_n],chk_error[Out_n]);
printf("%.11f\t %.11f\n", trn_error[Out_n]);
write_result(ep_n+1,Out_n,trn_error,chk_error); //debug.c writes to result.txt
}
else
{
for (i=0; i<Out_n; i++)
printf("%4d \t %.11f\n", ep_n+1, trn_error[i]);
}
***************************/
/**
//Find minimum training error and its epoch-number
if(trn_rmse_error[ep_n] < min_trn_RMSE) {
min_trn_RMSE_epoch = ep_n +1;
min_trn_RMSE = trn_rmse_error[ep_n];
record_parameter(parameter_array);
}
if(ep_n < epoch_n-1)
{
//update parameters in 1st layer (Using VNCSA)
update_parameter(1, step_size); //new_para.c
//update stepsize
update_step_size(trn_rmse_error, ep_n, &step_size, decrease_rate, increase_rate); //stepsize.c
}
}
***/
////////////////////////////////////////////////////////////
fppp = (FILE *)open_file("status.txt", "w");
fpppp = (FILE *)open_file("trn.txt", "w");
ep_n=0;
do
{
//step_size_pointer= &step_size;
printf("epoch numbernumber %d \n", ep_n+1);
//step_size_array[ep_n] = step_size_pointer;
step_size_array[ep_n] = step_size;
// after the above step, the updated stepsize at the end of the last loop is stored in the step_size_array.
// this will keep happening every time we start en epoch and hence at the end of the loop, step_size_array will
// have a list of all the updated step sizes. Since this is a offline version, step sizes are updated only
// at the end of an epoch.
for(m = 0; m < Out_n; m++)
{
//printf("m loop number %d \n", m);
for(j = 0; j < training_data_n; j++)
{
//printf("j loop number %d \n", j);
//copy the input vector(s) to input node(s)
put_input_data(node_p,j, training_data_matrix); //input.c
// after this(above) step, the input data is transferred frm the training data matrix to the "node" structure.
//printf("testing \n");
//printf("reeeetesting \n");
target[m] = training_data_matrix[j][(m+1)*In_vect_n+m]; // ***
// this step assigns the value of the "m"th output of "j" th trainig data pair to target.
//printf("testing \n");
//forward pass, get node outputs from layer 1 to layer 4
calculate_output(In_n, In_n + In_n*Mf_n + 3*Rule_n, j); //forward.c
// after this step, output of nodes in layer 1 to 4 is calculated. Please note that when this happens for the first
// time, i.e. when ep_n=0, our network parametrs are already initialized. thus, it is possible to get the
// output of each node using the function definitios proposed in forward.c. After first epoch, our parametrs get
// updated and this output is then calculated using teh new parameters. The essential point to note here is that
// we can always calculate the output of each node since we have already initialized our parameters.
//printf("testing \n");
//put outputs of layer 1 to 4 into layer_1_to_4_output
for(k = 0; k < Mf_n*In_n + 3*Rule_n; k++)
{
//printf("testing \n");
layer_1_to_4_output[j][k] = *node_p[k + In_n]->value;
//fprintf(fppp, "%lf \t %lf \t \n", (layer_1_to_4_output[j][k]).real, (layer_1_to_4_output[j][k]).imag);
}
// the above loop simply puts the values of nodes from layer 1 to layer 4 in the layer_1_to_4_output matrix.
//identify layer 5 params using LSE (Kalman filter)
//printf("testing \n");
get_kalman_data(kalman_data, target); //kalman.c
// this function call finds out the values of O4iXnl .. these are basically the coefficients
// of the kalman parametrs for a given training data pair
//puts them in kalman_data matrix.
// this kalman_data matrix has In_n number of rows and number of columns equal to number of parametrs that are
// responsible for determining each output... as stated above, the outputs are actually the coefficients of the
// parameters.
//printf("testing \n");
//calculate Kalman parameters
kalman(ep_n, j+(m*training_data_n), m, kalman_data, kalman_parameter,target); //kalman.c
// this function call evaluates kalman parametrs for a given output, for a given epoch.. that is it takes the epoch
// number from us, takes the info about how many times has kalman been invoked before, also takes in the
// output number(row number) for whihc the parametrs are to be found out... it also takes kalman_data and reads
// from it to estimate the kalman parameters... it also takes target .. and stores the output in the mth row of
// kalman_parameter.
//printf("testing \n");
}
// let me tell u what the abopve loop is doing.. after observing closely, it is easy to see that in the above loop,
// for a given output node, one by one, all the training data are taken inside the ANCFIS structure, outputs
// are calculated from one to 4, then a recursive kalman filetr is used to identify the kalman
// parametrs corresponding to the output node.. these kalman parameters are updated after every tarining data pair
// and finally at the end of all the training data, we have an estimate for the kalman parametrs corresponding to // the output node.
}
// thus, at the of the above loop, the kalman parametrs for all the output nodes are evaluated...
// now, we are ready to actually calculate the outputs.. plase remember that, all this while, the actual
// values of the parametrs of nodes in layer 1 and layer 5 are the ones that were randomly initialized.
for(j = 0; j < training_data_n; j++)
{
//printf("testing 1\n");
put_input_data(node_p,j, training_data_matrix); //input.c
//printf("testing 2 \n");
for(k = 0; k < Mf_n*In_n + 3*Rule_n; k++)
{
*node_p[k + In_n]->value = layer_1_to_4_output[j][k];
/*if(ep_n==1)
{
fprintf(fppp, "%d.\t %lf \t + \t i%lf \n", k, (layer_1_to_4_output[j][k]).real,(layer_1_to_4_output[j][k]).imag);
}*/
}
// u must be able to see that in the above two loops, each time, whatever output we got for a given training
// datta pair, it was safely stored in layer_1_to_4 array...and each time, the value on the actual nodes in the
// structure got changed.. due to new incoming training data pair..this was periodic with period trainingdata_n..
// that is for each output node, we got the same results for a given training dat aapir.. that is the node values
// were independent of m. Now, for a given traing data pair, we are getting those value back in the actual node
// node structure from that laye blh blah matrix..
//printf("testing 3\n");
put_kalman_parameter(Out_n,kalman_parameter); //kalman.c
//printf("hihahahha \n");
// using this function call, we are placing the setimated value of the layer 5 parametrs in the node structure
// by accessing each node and its parameter list.
// Do forward pass for L5 and L6
calculate_output(In_n + In_n*Mf_n + 3*Rule_n, Node_n, j); //forward.c
// for a given value of the training data pair, this function calculates the output of layer 5 and layer 6 nodes
// and places them in the node structure.
//printf("hihahahha no 2 \n");
calculate_root(training_data_matrix,diff,j,node_p); //debug.c
// this function call calculates the square of the erro between the predicted value of an output node and the
// corresponding actual value in the training data matrix..(actual output) and stores it in diff.
// this call performs the above action for a given training data pair and for all output nodes.
// Do backward pass and calculate all error rate for each node
calculate_de_do(j,Out_n,target,ancfis_output); //backward.c
//printf("hihahahha no 3 \n");
// calculates de_do for each node fora given training data pair
update_de_dp(j); //de_dp.c
// updates de_do for each node....
}
// thus at the end of this loop, estimated outputs for all the training data are calculated..also back propogatin
// is done and de_dp for all the nodes is updated.
//printf("testing 1\n");
calculate_trn_err(diff,trn_error, trn_datapair_error, training_data_n); //debug.c
//printf("testing 2 \n");
//training_error_measure(target,ancfis_output,diff, training_data_n, trn_error,out_n); //trn_err.c
trn_rmse_error[ep_n] = trn_error[Out_n];
trnNMSE[ep_n] = trn_rmse_error[ep_n]*trn_rmse_error[ep_n]/trnvariance;
fprintf(fppp, "epoch number is %d \t trn RMSE is %.11f \t trn NMSE is %lf \t \n", ep_n + 1, trn_rmse_error[ep_n], trnNMSE[ep_n]);
//fprintf(fpppp, "\n");
fprintf(fpppp, "epoch number is %d \t trn RMSE is %.11f \t trn NMSE is %lf \t \n", ep_n + 1, trn_rmse_error[ep_n], trnNMSE[ep_n]);
printf("trn RMSE is \t %lf \n", trn_rmse_error[ep_n]);
printf("trn NMSE is \t %lf \n", trnNMSE[ep_n]);
for(i=0; i<training_data_n; i++)
{
trn_datapair_error_sorted[0][i]=trn_datapair_error[i];
trn_datapair_error_sorted[1][i]= i+1;
}
for(j=1; j<training_data_n; j++)
{
for(i=0; i<training_data_n-j; i++)
{
if(trn_datapair_error_sorted[0][i]>trn_datapair_error_sorted[0][i+1])
{
sorting=trn_datapair_error_sorted[0][i+1];
trn_datapair_error_sorted[0][i+1]=trn_datapair_error_sorted[0][i];
trn_datapair_error_sorted[0][i]=sorting;
sortingindex = sorting=trn_datapair_error_sorted[1][i+1];
trn_datapair_error_sorted[1][i+1]=trn_datapair_error_sorted[1][i];
trn_datapair_error_sorted[1][i]=sortingindex;
}
}
}
for(j=0; j<training_data_n; j++)
{
fprintf(fppp, "\n");
fprintf(fppp, "training data pair sorted number \t %d \n", j+1);
fprintf(fppp, "training data pair original number \t %d \n", (int)(trn_datapair_error_sorted[1][j]));
fprintf(fppp, "training data pair sorted error in RMSE is \t %lf \n",trn_datapair_error_sorted[0][j]);
fprintf(fpppp, "%d \t", (int)(trn_datapair_error_sorted[1][j]));
complexsum = complex(0.0, 0.0);
fprintf(fppp,"Normalized layer 3 outputs are as follows \n");
for(k= In_n*Mf_n + Rule_n; k< In_n*Mf_n + 2*Rule_n; k++)
{
fprintf(fppp, "%d.\t %lf + i%lf \t %lf < %lf \n", k, (layer_1_to_4_output[j][k]).real,(layer_1_to_4_output[j][k]).imag, c_abs(layer_1_to_4_output[j][k]), c_phase(layer_1_to_4_output[j][k])*180/PI);
complexsum = c_add(complexsum, layer_1_to_4_output[j][k]);
}
fprintf(fppp, "Sum of the outputs of layer 3 is \t %lf+i%lf \t %lf<%lf \n", complexsum.real, complexsum.imag, c_abs(complexsum), c_phase(complexsum)*180/PI);
complexsum = complex(0.0, 0.0);
fprintf(fppp,"dot producted layer 4 outputs are as follows \n");
for(k=In_n*Mf_n + 2*Rule_n; k< In_n*Mf_n + 3*Rule_n; k++)
{
fprintf(fppp, "%d.\t %lf + i%lf \t %lf < %lf \n", k, (layer_1_to_4_output[j][k]).real,(layer_1_to_4_output[j][k]).imag, c_abs(layer_1_to_4_output[j][k]), c_phase(layer_1_to_4_output[j][k])*180/PI);
complexsum = c_add(complexsum, layer_1_to_4_output[j][k]);
}
fprintf(fppp, "sum of the outputs of layer 4 is \t %lf +i%lf \t %lf<%lf \n", complexsum.real, complexsum.imag, c_abs(complexsum), c_phase(complexsum)*180/PI);
if(j> training_data_n -6 )
{
trnnumcheck[(int)(trn_datapair_error_sorted[1][j])]= trnnumcheck[(int)(trn_datapair_error_sorted[1][j])] +1;
}
if(j<5 )
{
trnnumchecku[(int)(trn_datapair_error_sorted[1][j])]= trnnumchecku[(int)(trn_datapair_error_sorted[1][j])] +1;
}
}
fprintf(fpppp, "\n");
//Find RMSE of testing error
/********************************************************************************
if(checking_data_n != 0)
{
printf("testing 3 \n");
epoch_checking_error(checking_data_matrix, checking_data_n, chk_error, training_data_n, chk_output, ep_n); //chk_err.c writes to tracking.txt
printf("testing 4 \n");
chk_rmse_error[ep_n] = chk_error[Out_n];
for (i=0; i<Out_n; i++)
printf("%3d \t %.11f \t %.11f\n", ep_n+1, trn_error[i], chk_error[i]);
printf("%.11f\t %.11f\n", trn_error[Out_n],chk_error[Out_n]);
write_result(ep_n+1,Out_n,trn_error,chk_error); //debug.c writes to result.txt
}
else
{
for (i=0; i<Out_n; i++)
printf("%4d \t %.11f\n", ep_n+1, trn_error[i]);
}
**************************************************************************************/
// check whether the current training RMSE is less than the threhold and store its epch number and parametrs
if(trn_rmse_error[ep_n] < min_trn_RMSE)
{
min_trn_RMSE_epoch = ep_n +1;
min_trn_RMSE = trn_rmse_error[ep_n];
min_trnNMSE = trnNMSE[ep_n];
record_parameter(parameter_array);
}
if(ep_n < epoch_n-1)
{
//update parameters in 1st layer (Using VNCSA)
update_parameter(1, step_size); //new_para.c
//update stepsize
update_step_size(trn_rmse_error, ep_n, &step_size, decrease_rate, increase_rate); //stepsize.c
}
ep_n++;
} while((trnNMSE[ep_n -1]>= threshold) && (ep_n <= epoch_n -1));
for(i=1; i<=training_data_n; i++)
{
fprintf(fpppp, "%d \t %d \n", i, trnnumcheck[i]);
}
for(i=1; i<=training_data_n; i++)
{
fprintf(fpppp, "%d \t %d \n", i, trnnumchecku[i]);
}
if(trnNMSE[ep_n -1]< threshold)
{
fprintf(fppp, "\n");
fprintf(fppp, "We have gone below the threshold value \n");
fprintf(fppp, "the epoch number in which this happened is %d \n", min_trn_RMSE_epoch);
}
else
{
fprintf(fppp, "\n");
fprintf(fppp, "We exhausted the available epochs and threshold was not broken :( \n");
fprintf(fppp, "the epoch number which yielded minimum training RMSE is %d \n", min_trn_RMSE_epoch);
}
fclose(fppp);
fclose(fpppp);
double *minmaxc;
minmaxc= (double *)calloc(2*In_n, sizeof(double));
if((fpp = fopen("minmax.txt", "r")) == NULL)
{
printf("Cannot open 'parameter_file'.\n");
}
for(j = 0; j < 2*In_n; j++)
{
if(fscanf(fpp, "%lf", &tmp) != EOF)
{
minmaxc[j] = tmp;
} else {
printf("Not enough data in 'input_parameter'!");
}
}
fclose(fpp);
//////////////////////////////////////////////////////////////
restore_parameter(parameter_array); //output.c
write_parameter(FINA_PARA_FILE); //output.c
write_array(trnNMSE, epoch_n, TRAIN_ERR_FILE); //lib.c
if (checking_data_n != 0)
{
//printf("testing 3 \n");
epoch_checking_error(checking_data_matrix, checking_data_n, chk_error_n, chk_error_un, training_data_n, chk_output, ep_n -1, minmaxc); //chk_err.c writes to tracking.txt
//printf("testing 4 \n");
//chk_rmse_error[ep_n] = chk_error[Out_n];
min_chk_RMSE_n = chk_error_n[Out_n];
printf(" initial checking RMSE is %lf \n ", min_chk_RMSE_n);
min_chk_RMSE_un = chk_error_un[Out_n];
//for (i=0; i<Out_n; i++)
//printf("%3d \t %.11f \t %.11f\n", ep_n+1, trn_error[i], chk_error[i]);
//printf("%3d \t %.11f \n", ep_n+1, trn_error[i]);
//printf("%.11f\t %.11f\n", trn_error[Out_n],chk_error[Out_n]);
//printf("%.11f\t \n", trn_error[Out_n]);
//write_result(min_trn_RMSE_epoch ,Out_n,trn_rmse_error,chk_error); //debug.c writes to result.txt about the epoch number at which the stopping was done and the corresponding training RMSE and checking RMSE
}
//write_array(chk_rmse_error, epoch_n, CHECK_ERR_FILE); //lib.c
//}
write_array(step_size_array, epoch_n, STEP_SIZE_FILE); //lib.c
/**************************************************************************
min_chk_RMSE = chk_rmse_error[epoch_n -1];
min_chk_RMSE_epoch = epoch_n -1;
for(j=0; j< epoch_n; j++)
{
if(chk_rmse_error[j]< min_chk_RMSE)
{
min_chk_RMSE = chk_rmse_error[j];
min_chk_RMSE_epoch = j;
}
}
*************************************************************************/
/**************************************************************
double minmaxc[2*In_n];
if((fpp = fopen("minmax.txt", "r")) == NULL)
{
printf("Cannot open 'parameter_file'.\n");
}
for(j = 0; j < 2*In_n; j++)
{
if(fscanf(fpp, "%lf", &tmp) != EOF)
{
minmaxc[j] = tmp;
} else {
printf("Not enough data in 'input_parameter'!");
}
}
fclose(fpp);
***************************************************************************/
for(k=0; k< Out_n; k++)
{
for(j=0; j< checking_data_n; j++)
{
checking_data_matrix_un[j][k]= (checking_data_matrix[j][(k+1)*In_vect_n +k])* (minmaxc[(2*k) +1] - minmaxc[2*k]) + minmaxc[2*k];
}
}
// the following code calculates the cdavg_un and checking datat average bothe un normalized
for(k=0; k< Out_n; k++)
{
for(j=0; j< checking_data_n; j++)
{
checking_data_average_un = checking_data_average_un + checking_data_matrix_un[j][k];
}
cdavg_un[k]=checking_data_average_un/checking_data_n;
checking_data_average_un_temp=checking_data_average_un_temp+checking_data_average_un;
checking_data_average_un=0;
}
checking_data_average_un = checking_data_average_un_temp/(Out_n*checking_data_n);
printf("%lf is the checking datat average non normalized\n", checking_data_average_un);
// the following code calcuates the chkvar_un un normalized
for(k=0; k< Out_n; k++)
{
for(j=0; j< checking_data_n; j++)
{
temp= temp + (checking_data_matrix_un[j][k] - cdavg_un[k])*(checking_data_matrix_un[j][k] - cdavg_un[k]);
}
chkvar_un[k]=temp/(checking_data_n-1);
//checking_variance_un = checking_variance_un + temp;
temp=0;
}
temp =0.0;
// the following code cacluates the un normalized checking varinace
for(j=0; j< checking_data_n; j++)
{
for(k=0; k< Out_n; k++)
{
temp = checking_data_matrix_un[j][k] - checking_data_average_un;
temp = temp*temp;
checking_variance_un = checking_variance_un + temp;
}
}
checking_variance_un = checking_variance_un/((Out_n*checking_data_n)-1);
printf("%lf is the checking variance non normalized \n", checking_variance_un);
temp =0.0;
checking_data_average_n=0.0;
checking_data_average_n_temp=0.0;
// the following code calculates the cdavg and checking data average both normalized
for(k=0; k< Out_n; k++)
{
for(j=0; j< checking_data_n; j++)
{
checking_data_average_n = checking_data_average_n + checking_data_matrix[j][(k+1)*In_vect_n +k];
}
cdavg[k]=checking_data_average_n/checking_data_n;
checking_data_average_n_temp=checking_data_average_n_temp+checking_data_average_n;
checking_data_average_n=0;
}
checking_data_average_n = checking_data_average_n_temp/(Out_n*checking_data_n);
printf("%lf is the checking datat average normalized\n", checking_data_average_n);
temp =0.0;
checking_variance_n =0.0;
// the following code cacluates the normalized checking varinace
for(j=0; j< checking_data_n; j++)
{
for(k=0; k< Out_n; k++)
{
temp = checking_data_matrix[j][(k+1)*In_vect_n +k] - checking_data_average_n;
temp = temp*temp;
checking_variance_n = checking_variance_n + temp;
}
}
checking_variance_n = checking_variance_n/((Out_n*checking_data_n)-1);
temp = 0.0;
printf("%lf is the checking variance normalized \n", checking_variance_n);
// the following code calcuatres the normalized chkvar[k]
temp=0.0;
for(k=0; k< Out_n; k++)
{
for(j=0; j< checking_data_n; j++)
{
temp= temp + (checking_data_matrix[j][(k+1)*In_vect_n +k] - cdavg[k])*(checking_data_matrix[j][(k+1)*In_vect_n +k] - cdavg[k]);
}
chkvar[k]=temp/(checking_data_n-1);
//checking_variance_n = checking_variance_n + temp;
temp=0;
}
NMSE_un = min_chk_RMSE_un * min_chk_RMSE_un / checking_variance_un;
NMSE_n = min_chk_RMSE_n * min_chk_RMSE_n / checking_variance_n;
NMSE_n2 = min_chk_RMSE_n * min_chk_RMSE_n / chkvariance;
NDEI_un = sqrt(NMSE_un);
NDEI_n = sqrt(NMSE_n);
for(k=0;k<Out_n;k++)
{
NMSE[k]=chk_error_n[k]*chk_error_n[k]/chkvar[k];
NDEI[k]=sqrt(NMSE[k]);
unNMSE[k]=chk_error_un[k]*chk_error_un[k]/chkvar_un[k];
unNDEI[k]=sqrt(unNMSE[k]);
}
write_result(min_trn_RMSE_epoch ,Out_n,trn_rmse_error,chk_error_un, chk_error_n, NDEI_un, NMSE_un, NDEI_n, NMSE_n, NMSE, NDEI, unNMSE, unNDEI); //debug.c writes to result.txt about the epoch number at which the stopping was done and the corresponding training RMSE and checking RMSE
printf("Minimum training RMSE is \t %f \t \n",min_trn_RMSE);
printf("Minimum training RMSE epoch is \t %d \n",min_trn_RMSE_epoch);
printf("Minimum training NMSE is \t %f \t \n",min_trnNMSE);
//printf("Minimum training RMSE epoch is \t %d \n",min_trnNMSE_epoch);
//printf("Minimum training RMSE is \t %f \t \n",min_trn_RMSE);
//printf("Minimum training RMSE epoch is \t %d \n",min_trn_RMSE_epoch);
printf("%f \t is the checking RMSE non normalized\n",min_chk_RMSE_un);
printf("%f \t is the checking RMSE normalized\n",min_chk_RMSE_n);
//printf("%f \t is the checking RMSE normalized22222222 \n",min_chk_RMSE_n2);
printf(" checking NMSE non normlized is %f \t NDEI non normalized is %f \n",NMSE_un, NDEI_un);
printf("checking NMSE normalized is %f \t NDEI normalized is %f \n",NMSE_n, NDEI_n);
printf("checking NMSE2 normalized is %f \n",NMSE_n2);
printf("traning data variance is %f \n",trnvariance);
return(0);
void Comrade::Osiris::FastSOM_Neuron::calculate_output
(const std::vector<double>& ip_vector)
{
set_input_vector(ip_vector);
calculate_output();
}
