int keyboard()
{
int ret=-1, go=1;
char cmd1[]= "AT*EAID=1,1,\"Press the keys to simulate key presses on the computer\"\r";
char cmd2[]= "AT+CMER=3,2,,,\r";
char cmd3[]= "AT+CMER=0,0,,,\r";
char buf[MAXLEN]="", *key;
int status, keycnt;
Display *dpy = XOpenDisplay (NULL);
if(dpy==NULL) return -1;
writeport(cmd1, strlen(cmd1));
if(waitfor("OK", 1, TIMEOUT) != 1) go = 0;
writeport(cmd2, strlen(cmd2));
if(waitfor("OK", 1, TIMEOUT) != 1) go = 0;
while(go)
{
buf[0]=0;
ret = readport(buf, MAXLEN, TIMEOUT);
if( (ret <= 0 && ret != -EINTR) || strncmp(buf, "ERROR", 5)==0 )
{
ret=-1;
break;
}
if(strncmp(buf, "*EAII: ", 7)==0 || strncmp(buf, "*EAAI", 5)==0)
{
ret=1;
break;
}
if(strncmp(buf, "+CKEV: ", 7)==0)
{
status=strchr(buf,',')[1]-'0';
strchr(buf,',')[0]=0;
key=buf+7;
/* Correct for bug in T610 */
if(key[0]==0x1B && key[1]==0x14)
{
key[0]='^';
key[1]=0;
}
keycnt=0;
while(keycnt < conf->keymapcnt && strcmp(conf->keymap[keycnt].name,key)) keycnt++;
if(keycnt < conf->keymapcnt)
key_down_up(dpy, conf->keymap[keycnt].val, status);
}
}
writeport(cmd3, strlen(cmd3));
if(waitfor("OK", 5, TIMEOUT) != 1) ret = -1;
XCloseDisplay (dpy);
return ret;
}
HWND SetForegroundWindowEx(HWND aTargetWindow)
// Caller must have ensured that aTargetWindow is a valid window or NULL, since we
// don't call IsWindow() here.
{
DWORD target_thread;
HWND orig_foreground_wnd;
HWND new_foreground_wnd;
int is_attached_my_to_fore;
int is_attached_fore_to_target;
DWORD fore_thread;
int i;
int show_mode;
if (!aTargetWindow)
return NULL ; // When called this way (as it is sometimes), do nothing.
// v1.0.42.03: Calling IsWindowHung() once here rather than potentially more than once in AttemptSetForeground()
// solves a crash that is not fully understood, nor is it easily reproduced (it occurs only in release mode,
// not debug mode). It's likely a bug in the API's IsHungAppWindow(), but that is far from confirmed.
target_thread = GetWindowThreadProcessId(aTargetWindow, NULL) ;
/* if (target_thread != g_MainThreadID && IsWindowHung(aTargetWindow)) // Calls to IsWindowHung should probably be avoided if the window belongs to our thread. Relies upon short-circuit boolean order. */
/* return NULL ; */
orig_foreground_wnd = GetForegroundWindow() ;
// AutoIt3: If there is not any foreground window, then input focus is on the TaskBar.
// MY: It is definitely possible for GetForegroundWindow() to return NULL, even on XP.
if (!orig_foreground_wnd)
orig_foreground_wnd = FindWindow("Shell_TrayWnd", NULL) ;
if (aTargetWindow == orig_foreground_wnd) // It's already the active window.
return aTargetWindow ;
if (IsIconic(aTargetWindow))
show_mode = SW_RESTORE;
else
show_mode = SW_SHOW;
ShowWindow(aTargetWindow, show_mode);
// if (g_os.IsWin95() || (!g_os.IsWin9x() && !g_os.IsWin2000orLater()))) // Win95 or NT
// Try a simple approach first for these two OS's, since they don't have
// any restrictions on focus stealing:
#ifdef _DEBUG_WINACTIVATE
#define IF_ATTEMPT_SET_FORE if (new_foreground_wnd = AttemptSetForeground(aTargetWindow, orig_foreground_wnd, win_name))
#else
#define IF_ATTEMPT_SET_FORE if (new_foreground_wnd = AttemptSetForeground(aTargetWindow, orig_foreground_wnd))
#endif
IF_ATTEMPT_SET_FORE
return new_foreground_wnd ;
// Otherwise continue with the more drastic methods below.
// MY: The AttachThreadInput method, when used by itself, seems to always
// work the first time on my XP system, seemingly regardless of whether the
// "allow focus steal" change has been made via SystemParametersInfo()
// (but it seems a good idea to keep the SystemParametersInfo() in effect
// in case Win2k or Win98 needs it, or in case it really does help in rare cases).
// In many cases, this avoids the two SetForegroundWindow() attempts that
// would otherwise be needed ; and those two attempts cause some windows
// to flash in the taskbar, such as Metapad and Excel (less frequently) whenever
// you quickly activate another window after activating it first (e.g. via hotkeys).
// So for now, it seems best just to use this method by itself. The
// "two-alts" case never seems to fire on my system? Maybe it will
// on Win98 sometimes.
// Note: In addition to the "taskbar button flashing" annoyance mentioned above
// any SetForegroundWindow() attempt made prior to the one below will,
// as a side-effect, sometimes trigger the need for the "two-alts" case
// below. So that's another reason to just keep it simple and do it this way
// only.
#ifdef _DEBUG_WINACTIVATE
char buf[1024] ;
#endif
is_attached_my_to_fore = 0;
is_attached_fore_to_target = 0;
if (orig_foreground_wnd) // Might be NULL from above.
{
// Based on MSDN docs, these calls should always succeed due to the other
// checks done above (e.g. that none of the HWND's are NULL):
fore_thread = GetWindowThreadProcessId(orig_foreground_wnd, NULL) ;
// MY: Normally, it's suggested that you only need to attach the thread of the
// foreground window to our thread. However, I've confirmed that doing all three
// attaches below makes the attempt much more likely to succeed. In fact, it
// almost always succeeds whereas the one-attach method hardly ever succeeds the first
// time (resulting in a flashing taskbar button due to having to invoke a second attempt)
// when one window is quickly activated after another was just activated.
// AutoIt3: Attach all our input threads, will cause SetForeground to work under 98/Me.
// MSDN docs: The AttachThreadInput function fails if either of the specified threads
// does not have a message queue (My: ok here, since any window's thread MUST have a
// message queue). [It] also fails if a journal record hook is installed. ... Note
// that key state, which can be ascertained by calls to the GetKeyState or
// GetKeyboardState function, is reset after a call to AttachThreadInput. You cannot
// attach a thread to a thread in another desktop. A thread cannot attach to itself.
// Therefore, idAttachTo cannot equal idAttach. Update: It appears that of the three,
// this first call does not offer any additional benefit, at least on XP, so not
// using it for now:
//if (g_MainThreadID != target_thread) // Don't attempt the call otherwise.
// AttachThreadInput(g_MainThreadID, target_thread, TRUE) ;
if (fore_thread && g_MainThreadID != fore_thread)
is_attached_my_to_fore = AttachThreadInput(g_MainThreadID, fore_thread, TRUE) != 0 ;
if (fore_thread && target_thread && fore_thread != target_thread) // IsWindowHung(aTargetWindow) was called earlier.
is_attached_fore_to_target = AttachThreadInput(fore_thread, target_thread, TRUE) != 0 ;
}
// The log showed that it never seemed to need more than two tries. But there's
// not much harm in trying a few extra times. The number of tries needed might
// vary depending on how fast the CPU is:
for (i = 0; i < 5; ++i)
{
IF_ATTEMPT_SET_FORE
{
#ifdef _DEBUG_WINACTIVATE
if (i > 0) // More than one attempt was needed.
{
snprintf(buf, sizeof(buf), "AttachThreadInput attempt #%d indicated success: %s"
, i + 1, win_name);
FileAppend(LOGF, buf);
}
#endif
break;
}
}
// I decided to avoid the quick minimize + restore method of activation. It's
// not that much more effective (if at all), and there are some significant
// disadvantages:
// - This call will often hang our thread if aTargetWindow is a hung window: ShowWindow(aTargetWindow, SW_MINIMIZE)
// - Using SW_FORCEMINIMIZE instead of SW_MINIMIZE has at least one (and probably more)
// side effect: When the window is restored, at least via SW_RESTORE, it is no longer
// maximized even if it was before the minmize. So don't use it.
if (!new_foreground_wnd) // Not successful yet.
{
// Some apps may be intentionally blocking us by having called the API function
// LockSetForegroundWindow(), for which MSDN says "The system automatically enables
// calls to SetForegroundWindow if the user presses the ALT key or takes some action
// that causes the system itself to change the foreground window (for example,
// clicking a background window)." Also, it's probably best to avoid doing
// the 2-alts method except as a last resort, because I think it may mess up
// the state of menus the user had displayed. And of course if the foreground
// app has special handling for alt-key events, it might get confused.
// My original note: "The 2-alts case seems to mess up on rare occasions,
// perhaps due to menu weirdness triggered by the alt key."
// AutoIt3: OK, this is not funny - bring out the extreme measures (usually for 2000/XP).
// Simulate two single ALT keystrokes. UPDATE: This hardly ever succeeds. Usually when
// it fails, the foreground window is NULL (none). I'm going to try an Win-tab instead,
// which selects a task bar button. This seems less invasive than doing an alt-tab
// because not only doesn't it activate some other window first, it also doesn't appear
// to change the Z-order, which is good because we don't want the alt-tab order
// that the user sees to be affected by this. UPDATE: Win-tab isn't doing it, so try
// Alt-tab. Alt-tab doesn't do it either. The window itself (metapad.exe is the only
// culprit window I've found so far) seems to resist being brought to the foreground,
// but later, after the hotkey is released, it can be. So perhaps this is being
// caused by the fact that the user has keys held down (logically or physically?)
// Releasing those keys with a key-up event might help, so try that sometime:
key_down_up(VK_LMENU);
key_down_up(VK_LMENU);
//KeyEvent(KEYDOWN, VK_LWIN) ;
//KeyEvent(KEYDOWN, VK_TAB) ;
//KeyEvent(KEYUP, VK_TAB) ;
//KeyEvent(KEYUP, VK_LWIN) ;
//KeyEvent(KEYDOWN, VK_MENU) ;
//KeyEvent(KEYDOWN, VK_TAB) ;
//KeyEvent(KEYUP, VK_TAB) ;
//KeyEvent(KEYUP, VK_MENU) ;
// Also replacing "2-alts" with "alt-tab" below, for now:
#ifndef _DEBUG_WINACTIVATE
new_foreground_wnd = AttemptSetForeground(aTargetWindow, orig_foreground_wnd) ;
#else // debug mode
IF_ATTEMPT_SET_FORE
FileAppend(LOGF, "2-alts ok: ", false) ;
else
{