Esempio n. 1
0
int main(void)
{
    /* Configure the hardware ready to run the test. */
    prvSetupHardware();

    xTaskCreate( vWebTask, ( signed portCHAR * ) "Web", TCPIP_THREAD_STACKSIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

#ifdef CHECK_TEST
    xTaskCreate( vCheckTask, ( signed portCHAR * ) "Check", mainCHECK_TASK_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
#endif

    //vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartGenericQueueTasks( tskIDLE_PRIORITY );
    vStartQueueSetTasks();


    printf("FreeRTOS is starting ...\n");

    /* Start the scheduler. */
    vTaskStartScheduler();

    /* If all is well, the scheduler will now be running, and the following line
    will never be reached.  If the following line does execute, then there was
    insufficient FreeRTOS heap memory available for the idle and/or timer tasks
    to be created.  See the memory management section on the FreeRTOS web site
    for more details. */
    for( ;; );
}
Esempio n. 2
0
int main( void )
{
	/* Perform the necessary hardware configuration. */
	prvSetupHardware();

	/* Create the task that writes various text and patterns to the LCD. */
	xTaskCreate( vLCDTask, "LCD", configMINIMAL_STACK_SIZE, NULL, mainLCD_TASK_PRIORITY, NULL );

	/* Create a task that writes to LEDs 8 to 15. */
	xTaskCreate( vLEDTask, "LCDTask", configMINIMAL_STACK_SIZE, NULL, mainLED_TASK_PRIORITY, NULL );

	/* Create some of the standard demo tasks.  These just test the port and
	demonstrate how the FreeRTOS API can be used.  They do not provide any
	specific functionality. */
	vStartGenericQueueTasks( mainGEN_Q_TASK_PRIORITY );
	vStartQueuePeekTasks();
	vStartRecursiveMutexTasks();
	vStartSemaphoreTasks( mainSEMAPHORE_TASK_PRIORITY );
	
	/* Create the check task as described at the top of this file. */
	xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
	
	/* Start the scheduler. */
	vTaskStartScheduler();
	
	/* The scheduler should now be running the tasks so the following code should
	never be reached.  If it is reached then there was insufficient heap space
	for the idle task to be created.  In this case the heap size is set by
	configTOTAL_HEAP_SIZE in FreeRTOSConfig.h. */
	for( ;; );
}
Esempio n. 3
0
int main( void )
{
	/* Prepare the hardware. */
	prvSetupHardware();

	/* Create the queue used by the LCD task.  Messages for display on the LCD
	are received via this queue. */
	xLCDQueue = xQueueCreate( mainLCD_QUEUE_SIZE, sizeof( xLCDMessage ) );

	/* Start the standard demo tasks.  These do nothing other than test the
	port and provide some APU usage examples. */
    vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartRecursiveMutexTasks();
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vCreateBlockTimeTasks();
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartQueuePeekTasks();
	vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
	vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainBAUD_RATE, mainCOM_TEST_LED );

	/* Start the tasks defined within this file/specific to this demo. */
	xTaskCreate( prvLCDTask, "LCD", mainLCD_TASK_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

	/* Start the scheduler. */
	vTaskStartScheduler();

    /* Will only get here if there was insufficient memory to create the idle
    task. */
	return 0;
}
Esempio n. 4
0
/*
 * Starts all the other tasks, then starts the scheduler.
 */
int main( void )
{
	/* Setup any hardware that has not already been configured by the low
	level init routines. */
	prvSetupHardware();

	/* Start the task that handles the TCP/IP and WEB server functionality. */
    xTaskCreate( vuIP_Task, "uIP", mainUIP_TASK_STACK_SIZE, NULL, mainUIP_PRIORITY, NULL );
	
	/* Also start the USB demo which is just for the SAM7. */
    vStartUSBTask( mainUSB_PRIORITY );
	
	/* Start the standard demo tasks. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
    vStartLEDFlashTasks( mainFLASH_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
    vStartQueuePeekTasks();   
    vStartDynamicPriorityTasks();

	/* Start the scheduler.

	NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
	The processor MUST be in supervisor mode when vTaskStartScheduler is
	called.  The demo applications included in the FreeRTOS.org download switch
	to supervisor mode prior to main being called.  If you are not using one of
	these demo application projects then ensure Supervisor mode is used here. */

	vTaskStartScheduler();

	/* We should never get here as control is now taken by the scheduler. */
  	return 0;
}
Esempio n. 5
0
/*
 * Create the demo tasks then start the scheduler.
 */
int main( void )
{
	/* Configure any hardware required for this demo. */
	prvSetupHardware();

	/* Create the LCD task - this returns the queue to use when writing 
	messages to the LCD. */
	xLCDQueue = xStartLCDTask();

	/* Create all the other standard demo tasks. */
	vStartLEDFlashTasks( tskIDLE_PRIORITY );
    vCreateBlockTimeTasks();
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
    vStartQueuePeekTasks();
	vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
	vStartInterruptQueueTasks();

	/* Create the tasks defined within this file. */
	xTaskCreate( prvTestTask1, "Tst1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvTestTask2, "Tst2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

	/* prvCheckTask uses sprintf so requires more stack. */
	xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* Finally start the scheduler. */
	vTaskStartScheduler();

	/* Will only reach here if there is insufficient heap available to start
	the scheduler. */
	return 0;
}
Esempio n. 6
0
int main( void )
{
	#ifdef DEBUG
		debug();
	#endif

	prvSetupHardware();

	/* Create the queue used by the LCD task.  Messages for display on the LCD
	are received via this queue. */
	xLCDQueue = xQueueCreate( mainLCD_QUEUE_SIZE, sizeof( xLCDMessage ) );
	
	/* Start the standard demo tasks. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
	vStartGenericQueueTasks( mainGEN_Q_PRIORITY );
	vStartQueuePeekTasks();
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );

	/* Start the tasks defined within this file/specific to this demo. */
    xTaskCreate( prvCheckTask, ( signed portCHAR * ) "Check", mainCHECK_TASK_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );	
	xTaskCreate( prvLCDTask, ( signed portCHAR * ) "LCD", configLCD_TASK_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvFlashTask, ( signed portCHAR * ) "Flash", configMINIMAL_STACK_SIZE, NULL, mainFLASH_TASK_PRIORITY, NULL );

	/* Configure the timers used by the fast interrupt timer test. */
	vSetupTimerTest();
	
	/* Start the scheduler. */
	vTaskStartScheduler();
	
	/* Will only get here if there was not enough heap space to create the
	idle task. */
	return 0;
}
Esempio n. 7
0
int main( void )
{
	/* Configure the hardware for use by this demo. */
	prvSetupHardware();

	/* Start the standard demo tasks.  These are just here to exercise the
	kernel port and provide examples of how the FreeRTOS API can be used. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
    vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
    vStartQueuePeekTasks();
    vStartRecursiveMutexTasks();
	vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );

    /* Create the USB task. */
    xTaskCreate( vUSBTask, "USB", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );

	/* Create the uIP task.  The WEB server runs in this task. */
    xTaskCreate( vuIP_Task, "uIP", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY, NULL );

    /* Start the scheduler. */
	vTaskStartScheduler();

    /* Will only get here if there was insufficient memory to create the idle
    task.  The idle task is created within vTaskStartScheduler(). */
	for( ;; );
}
Esempio n. 8
0
/*
 * Create the demo tasks then start the scheduler.
 */
int main_full( void )
{
TimerHandle_t xTimer = NULL;

	/* Create the LCD task - this returns the queue to use when writing
	messages to the LCD. */
	xLCDQueue = xStartLCDTask();

	/* Create all the other standard demo tasks. */
	vStartLEDFlashTimers( mainNUM_FLASH_TIMER_LEDS );
    vCreateBlockTimeTasks();
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
    vStartQueuePeekTasks();
	vStartInterruptQueueTasks();

	/* Create the tasks defined within this file. */
	xTaskCreate( prvRegTestTask1, "Reg1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvRegTestTask2, "Reg2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

    /* The PIC32MX795 uses an 8 deep fifo where TX interrupts are asserted
	whilst the TX buffer is empty.  This causes an issue with the test driver so
	it is not used in this demo */
	#if !defined(__32MX795F512L__)
		vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
	#endif

	/* Create the software timer that performs the 'check' functionality, as
	described at the top of this file. */
	xTimer = xTimerCreate( 	"CheckTimer",/* A text name, purely to help debugging. */
							( mainCHECK_TIMER_PERIOD_MS ),		/* The timer period, in this case 3000ms (3s). */
							pdTRUE,								/* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
							( void * ) 0,						/* The ID is not used, so can be set to anything. */
							prvCheckTimerCallback				/* The callback function that inspects the status of all the other tasks. */
						);

	if( xTimer != NULL )
	{
		xTimerStart( xTimer, mainDONT_BLOCK );
	}

	/* A software timer is also used to start the high frequency timer test.
	This is to ensure the test does not start before the kernel.  This time a
	one shot software timer is used. */
	xTimer = xTimerCreate( "HighHzTimerSetup", 1, pdFALSE, ( void * ) 0, prvSetupHighFrequencyTimerTest );
	if( xTimer != NULL )
	{
		xTimerStart( xTimer, mainDONT_BLOCK );
	}

	/* Finally start the scheduler. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following line
	will never be reached.  If the following line does execute, then there was
	insufficient FreeRTOS heap memory available for the idle and/or timer tasks
	to be created.  See the memory management section on the FreeRTOS web site
	for more details. */
	for( ;; );
}
Esempio n. 9
0
/*
 * Create the demo tasks then start the scheduler.
 */
int main_full( void )
{
xTimerHandle xTimer = NULL;

	/* Create all the other standard demo tasks. */
	vStartLEDFlashTimers( mainNUM_FLASH_TIMER_LEDS );
	vCreateBlockTimeTasks();
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartQueuePeekTasks();
	vStartInterruptQueueTasks();
	vStartISRTriggeredTask();
	vStartCountingSemaphoreTasks();
	vStartDynamicPriorityTasks();
	vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_TASK_PRIORITY );
	vStartQueueSetTasks();
	vStartRecursiveMutexTasks();

	/* Create the tasks defined within this file. */
	xTaskCreate( prvRegTestTask1,			/* The function that implements the task. */
				"Reg1",						/* Text name for the task to assist debugger - not used by FreeRTOS itself. */
				configMINIMAL_STACK_SIZE,	/* The stack size to allocate for the task - specified in words not bytes. */
				NULL,						/* The parameter to pass into the task - not used in this case so set to NULL. */
				tskIDLE_PRIORITY,			/* The priority to assign to the task. */
				NULL );						/* Used to obtain a handle to the task being created - not used in this case so set to NULL. */

	xTaskCreate( prvRegTestTask2, "Reg2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

	/* Create the software timer that performs the 'check' functionality, as
	described at the top of this file. */
	xTimer = xTimerCreate( 	"CheckTimer",/* A text name, purely to help debugging. */
							( mainCHECK_TIMER_PERIOD_MS ),		/* The timer period, in this case 3000ms (3s). */
							pdTRUE,								/* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
							( void * ) 0,						/* The ID is not used, so can be set to anything. */
							prvCheckTimerCallback );			/* The callback function that inspects the status of all the other tasks. */

	if( xTimer != NULL )
	{
		xTimerStart( xTimer, mainDONT_BLOCK );
	}

	/* A software timer is also used to start the high frequency timer test.
	This is to ensure the test does not start before the kernel.  This time a
	one shot software timer is used. */
	xTimer = xTimerCreate( "HighHzTimerSetup", 1, pdFALSE, ( void * ) 0, prvSetupHighFrequencyTimerTest );
	if( xTimer != NULL )
	{
		xTimerStart( xTimer, mainDONT_BLOCK );
	}

	/* Finally start the scheduler. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following line
	will never be reached.  If the following line does execute, then there was
	insufficient FreeRTOS heap memory available for the idle and/or timer tasks
	to be created.  See the memory management section on the FreeRTOS web site
	for more details.  http://www.freertos.org/a00111.html */
	for( ;; );
}
Esempio n. 10
0
int main( void )
{
	prvSetupHardware();

	/* Create the queue used by the LCD task.  Messages for display on the LCD
	are received via this queue. */
	xLCDQueue = xQueueCreate( mainQUEUE_SIZE, sizeof( xLCDMessage ) );

	/* Create the uIP task.  This uses the lwIP RTOS abstraction layer.*/
    xTaskCreate( vuIP_Task, "uIP", mainBASIC_WEB_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );

	/* Start the standard demo tasks. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
    vStartLEDFlashTasks( mainFLASH_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
    vStartQueuePeekTasks();
    vStartDynamicPriorityTasks();

	/* Start the tasks defined within this file/specific to this demo. */
	xTaskCreate( vLCDTask, "LCD", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );

	/* Start the scheduler. */
	vTaskStartScheduler();

    /* Will only get here if there was insufficient memory to create the idle
    task. */
	return 0;
}
Esempio n. 11
0
int main( void )
{
	/* Setup the hardware ready for this demo. */
	prvSetupHardware();

	/* Create the WEB server task. */
	xTaskCreate( vuIP_Task, ( signed portCHAR * ) "uIP", mainBASIC_WEB_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );

	/* Start the standard demo tasks. */
	vStartLEDFlashTasks( tskIDLE_PRIORITY );
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartQueuePeekTasks();
    vStartRecursiveMutexTasks();

	/* Start the reg test tasks - defined in this file. */
	xTaskCreate( vRegTest1Task, ( signed portCHAR * ) "Reg1", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest1Counter, tskIDLE_PRIORITY, NULL );
	xTaskCreate( vRegTest2Task, ( signed portCHAR * ) "Reg2", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest2Counter, tskIDLE_PRIORITY, NULL );

	/* Create the check task. */
	xTaskCreate( prvCheckTask, ( signed portCHAR * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* Start the scheduler. */
	vTaskStartScheduler();

    /* Will only get here if there was insufficient heap to create the idle
    task. */
	for( ;; );
}
Esempio n. 12
0
int main( void )
{
#ifdef DEBUG
  debug();
#endif

	/* Set up the clocks and memory interface. */
	prvSetupHardware();

	/* Start the standard demo tasks.  These are just here to exercise the
	kernel port and provide examples of how the FreeRTOS API can be used. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
    vStartQueuePeekTasks();
    vStartRecursiveMutexTasks();

	/* Create the 'echo' task, which is also defined within this file. */
	xTaskCreate( prvUSARTEchoTask, ( signed char * ) "Echo", configMINIMAL_STACK_SIZE, NULL, mainECHO_TASK_PRIORITY, NULL );

	/* Create the 'check' task, which is also defined within this file. */
	xTaskCreate( prvCheckTask, ( signed char * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

    /* Start the scheduler. */
	vTaskStartScheduler();

    /* Will only get here if there was insufficient memory to create the idle
    task.  The idle task is created within vTaskStartScheduler(). */
	for( ;; );
}
void main_full( void )
{
	/* This demo sets the clock to its maximum.  The blinky demo uses as slower
 	clock as it uses low power features.  */
	prvConfigureClocks();

	/* Init the serial port for use by the CLI.  The baud rate parameter is not
	used so set to 0 to make this obvious. */
	xSerialPortInitMinimal( 0, mainRX_QUEUE_LENGTH );

	/* Start all the other standard demo/test tasks.  They have no particular
	functionality, but do demonstrate how to use the FreeRTOS API and test the
	kernel port. */
	vStartInterruptQueueTasks();

	vStartCountingSemaphoreTasks();
	vStartGenericQueueTasks( tskIDLE_PRIORITY );
	vStartRecursiveMutexTasks();
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
	vStartEventGroupTasks();
	vStartTaskNotifyTask();
	vStartInterruptSemaphoreTasks();

	/* Note - the set of standard demo tasks contains two versions of
	vStartMathTasks.c.  One is defined in flop.c, and uses double precision
	floating point numbers and variables.  The other is defined in sp_flop.c,
	and uses single precision floating point numbers and variables.  sp_flop.
	c should be included in this project. */
	vStartMathTasks( mainFLOP_TASK_PRIORITY );

	/* Start the tasks that implements the command console on the UART, as
	described above. */
	vUARTCommandConsoleStart( mainUART_COMMAND_CONSOLE_STACK_SIZE, mainUART_COMMAND_CONSOLE_TASK_PRIORITY );

	/* Register the standard CLI commands. */
	vRegisterSampleCLICommands();

	/* Create the register check tasks, as described at the top of this	file */
	xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvRegTestTaskEntry2, "Reg2", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_2_PARAMETER, tskIDLE_PRIORITY, NULL );

	/* Create the task that performs the 'check' functionality,	as described at
	the top of this file. */
	xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following
	line will never be reached.  If the following line does execute, then
	there was either insufficient FreeRTOS heap memory available for the idle
	and/or timer tasks to be created, or vTaskStartScheduler() was called from
	User mode.  See the memory management section on the FreeRTOS web site for
	more details on the FreeRTOS heap http://www.freertos.org/a00111.html.  The
	mode from which main() is called is set in the C start up code and must be
	a privileged mode (not user mode). */
	for( ;; );
}
Esempio n. 14
0
int main_full( void )
{
	/* Start the check task as described at the top of this file. */
	xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* Create the standard demo tasks. */
	vStartTaskNotifyTask();
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
	vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartQueuePeekTasks();
	vStartMathTasks( mainFLOP_TASK_PRIORITY );
	vStartRecursiveMutexTasks();
	vStartCountingSemaphoreTasks();
	vStartDynamicPriorityTasks();
	vStartQueueSetTasks();
	vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_PRIORITY );
	vStartEventGroupTasks();
	vStartInterruptSemaphoreTasks();
	vStartQueueSetPollingTask();
	vCreateBlockTimeTasks();
	vCreateAbortDelayTasks();
	xTaskCreate( prvDemoQueueSpaceFunctions, "QSpace", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvPermanentlyBlockingSemaphoreTask, "BlockSem", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvPermanentlyBlockingNotificationTask, "BlockNoti", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

	#if( configSUPPORT_STATIC_ALLOCATION == 1 )
	{
		vStartStaticallyAllocatedTasks();
	}
	#endif

	#if( configUSE_PREEMPTION != 0  )
	{
		/* Don't expect these tasks to pass when preemption is not used. */
		vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
	}
	#endif

	/* The suicide tasks must be created last as they need to know how many
	tasks were running prior to their creation.  This then allows them to
	ascertain whether or not the correct/expected number of tasks are running at
	any given time. */
	vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Create the semaphore that will be deleted in the idle task hook.  This
	is done purely to test the use of vSemaphoreDelete(). */
	xMutexToDelete = xSemaphoreCreateMutex();

	/* Start the scheduler itself. */
	vTaskStartScheduler();

	/* Should never get here unless there was not enough heap space to create
	the idle and other system tasks. */
	return 0;
}
void main_full( void )
{
TimerHandle_t xCheckTimer = NULL;

	/* Prepare to run the full demo: Configure the IO, register the CLI
	commands, and depending on configuration, generate a set of sample files on
	a RAM disk. */
	prvPrepareForFullDemo();

	/* Start all the other standard demo/test tasks.  The have not particular
	functionality, but do demonstrate how to use the FreeRTOS API and test the
	kernel port. */
	vStartIntegerMathTasks( tskIDLE_PRIORITY );
	vStartDynamicPriorityTasks();
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vCreateBlockTimeTasks();
	vStartCountingSemaphoreTasks();
	vStartGenericQueueTasks( tskIDLE_PRIORITY );
	vStartRecursiveMutexTasks();
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartLEDFlashTimers( mainNUMBER_OF_FLASH_TIMERS_LEDS );

	/* Start the tasks that implements the command console on the UART, as
	described above. */
	vUARTCommandConsoleStart( mainUART_COMMAND_CONSOLE_STACK_SIZE, mainUART_COMMAND_CONSOLE_TASK_PRIORITY );

	/* Create the software timer that performs the 'check' functionality,
	as described at the top of this file. */
	xCheckTimer = xTimerCreate( "CheckTimer",					/* A text name, purely to help debugging. */
								( mainCHECK_TIMER_PERIOD_MS ),	/* The timer period, in this case 3000ms (3s). */
								pdTRUE,							/* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
								( void * ) 0,					/* The ID is not used, so can be set to anything. */
								prvCheckTimerCallback			/* The callback function that inspects the status of all the other tasks. */
							  );

	if( xCheckTimer != NULL )
	{
		xTimerStart( xCheckTimer, mainDONT_BLOCK );
	}

	/* The set of tasks created by the following function call have to be
	created last as they keep account of the number of tasks they expect to see
	running. */
	vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following line
	will never be reached.  If the following line does execute, then there was
	insufficient FreeRTOS heap memory available for the idle and/or timer tasks
	to be created.  See the memory management section on the FreeRTOS web site
	for more details. */
	for( ;; );
}
Esempio n. 16
0
/*
 * Starts all the other tasks, then starts the scheduler.
 */
void main( void )
{
	#ifdef DEBUG
		debug();
	#endif
	
	/* Setup any hardware that has not already been configured by the low
	level init routines. */
	prvSetupHardware();
	/* Create the queue used to send data to the LCD task. */
	xLCDQueue = xQueueCreate( mainLCD_QUEUE_LEN, sizeof( xLCDMessage ) );
	
	/* Start all the standard demo application tasks. */
	vStartIntegerMathTasks( tskIDLE_PRIORITY );
	vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vStartDynamicPriorityTasks();
	vStartMathTasks( tskIDLE_PRIORITY );
	vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
	vStartGenericQueueTasks( mainGENERIC_QUEUE_PRIORITY );
	vStartQueuePeekTasks();	

	/* Start the tasks which are defined in this file. */
	xTaskCreate( vErrorChecks, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );
	xTaskCreate( prvLCDTask, "LCD", configMINIMAL_STACK_SIZE, ( void * ) &xLCDQueue, mainLCD_TASK_PRIORITY, NULL );
	xTaskCreate( prvLCDMessageTask, "MSG", configMINIMAL_STACK_SIZE, ( void * ) &xLCDQueue, mainMSG_TASK_PRIORITY, NULL );

	/* Start either the uIP TCP/IP stack or the lwIP TCP/IP stack. */
	#ifdef STACK_UIP
		/* Finally, create the WEB server task. */
		xTaskCreate( vuIP_Task, "uIP", configMINIMAL_STACK_SIZE * 3, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
	#endif

	#ifdef STACK_LWIP	
		/* Create the lwIP task.  This uses the lwIP RTOS abstraction layer.*/
	  	vlwIPInit();
		sys_set_state(	( signed portCHAR * ) "httpd", lwipBASIC_SERVER_STACK_SIZE );
	  	sys_thread_new( vBasicWEBServer, ( void * ) NULL, basicwebWEBSERVER_PRIORITY );
		sys_set_default_state();
	#endif

	/* Start the scheduler.

	NOTE : Tasks run in system mode and the scheduler runs in Supervisor mode.
	The processor MUST be in supervisor mode when vTaskStartScheduler is
	called.  The demo applications included in the FreeRTOS.org download switch
	to supervisor mode prior to main being called.  If you are not using one of
	these demo application projects then ensure Supervisor mode is used here. */

	vTaskStartScheduler();

	/* We should never get here as control is now taken by the scheduler. */
	for( ;; );
}
Esempio n. 17
0
File: main.c Progetto: HclX/freertos
/*************************************************************************
 * Please ensure to read http://www.freertos.org/portlm3sx965.html
 * which provides information on configuring and running this demo for the
 * various Luminary Micro EKs.
 *************************************************************************/
int main( void )
{
	prvSetupHardware();

	/* Create the queue used by the OLED task.  Messages for display on the OLED
	are received via this queue. */
	xOLEDQueue = xQueueCreate( mainOLED_QUEUE_SIZE, sizeof( xOLEDMessage ) );

	/* Start the standard demo tasks. */
    vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
    vStartInterruptQueueTasks();
	vStartRecursiveMutexTasks();
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vCreateBlockTimeTasks();
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartQueuePeekTasks();
	vStartQueueSetTasks();
	vStartEventGroupTasks();

	/* Exclude some tasks if using the kickstart version to ensure we stay within
	the 32K code size limit. */
	#if mainINCLUDE_WEB_SERVER != 0
	{
		/* Create the uIP task if running on a processor that includes a MAC and
		PHY. */
		if( SysCtlPeripheralPresent( SYSCTL_PERIPH_ETH ) )
		{
			xTaskCreate( vuIP_Task, "uIP", mainBASIC_WEB_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY - 1, NULL );
		}
	}
	#endif



	/* Start the tasks defined within this file/specific to this demo. */
	xTaskCreate( vOLEDTask, "OLED", mainOLED_TASK_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

	/* The suicide tasks must be created last as they need to know how many
	tasks were running prior to their creation in order to ascertain whether
	or not the correct/expected number of tasks are running at any given time. */
    vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Configure the high frequency interrupt used to measure the interrupt
	jitter time. */
	vSetupHighFrequencyTimer();

	/* Start the scheduler. */
	vTaskStartScheduler();

    /* Will only get here if there was insufficient memory to create the idle
    task. */
	return 0;
}
Esempio n. 18
0
void main_full( void )
{
xTimerHandle xCheckTimer = NULL;

	/* Start all the other standard demo/test tasks.  The have not particular
	functionality, but do demonstrate how to use the FreeRTOS API and test the
	kernel port. */
	vStartIntegerMathTasks( tskIDLE_PRIORITY );
	vStartDynamicPriorityTasks();
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vCreateBlockTimeTasks();
	vStartCountingSemaphoreTasks();
	vStartGenericQueueTasks( tskIDLE_PRIORITY );
	vStartRecursiveMutexTasks();
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartMathTasks( mainFLOP_TASK_PRIORITY );
	
	/* Create the register check tasks, as described at the top of this
	file */
	xTaskCreate( vRegTest1Task, ( signed char * ) "Reg1", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );
	xTaskCreate( vRegTest2Task, ( signed char * ) "Reg2", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );

	/* Create the software timer that performs the 'check' functionality,
	as described at the top of this file. */
	xCheckTimer = xTimerCreate( ( const signed char * ) "CheckTimer",/* A text name, purely to help debugging. */
								( mainCHECK_TIMER_PERIOD_MS ),		/* The timer period, in this case 3000ms (3s). */
								pdTRUE,								/* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
								( void * ) 0,						/* The ID is not used, so can be set to anything. */
								prvCheckTimerCallback				/* The callback function that inspects the status of all the other tasks. */
							  );	
	
	if( xCheckTimer != NULL )
	{
		xTimerStart( xCheckTimer, mainDONT_BLOCK );
	}

	/* The set of tasks created by the following function call have to be 
	created last as they keep account of the number of tasks they expect to see 
	running. */
	vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Start the scheduler. */
	vTaskStartScheduler();
	
	/* If all is well, the scheduler will now be running, and the following line
	will never be reached.  If the following line does execute, then there was
	insufficient FreeRTOS heap memory available for the idle and/or timer tasks
	to be created.  See the memory management section on the FreeRTOS web site
	for more details. */
	for( ;; )
	{
		__asm volatile( "NOP" );
	}
}
Esempio n. 19
0
static void prvOptionallyCreateComprehensveTestApplication( void )
{
	#if ( mainCREATE_SIMPLE_LED_FLASHER_DEMO_ONLY == 0 )
	{
	xTimerHandle xCheckTimer = NULL;

		/* Start all the other standard demo/test tasks. */
		vStartIntegerMathTasks( tskIDLE_PRIORITY );
		vStartDynamicPriorityTasks();
		vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
		vCreateBlockTimeTasks();
		vStartCountingSemaphoreTasks();
		vStartGenericQueueTasks( tskIDLE_PRIORITY );
		vStartRecursiveMutexTasks();
		vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
		vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );

		/* Most importantly, start the tasks that use the FPU. */
		vStartMathTasks( mainFLOP_TASK_PRIORITY );
		
		/* Create the register check tasks, as described at the top of this
		file */
		xTaskCreate( vRegTest1Task, ( signed char * ) "Reg1", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );
		xTaskCreate( vRegTest2Task, ( signed char * ) "Reg2", configMINIMAL_STACK_SIZE, ( void * ) NULL, tskIDLE_PRIORITY, NULL );

		/* Create the software timer that performs the 'check' functionality,
		as described at the top of this file. */
		xCheckTimer = xTimerCreate( ( const signed char * ) "CheckTimer",/* A text name, purely to help debugging. */
									( mainCHECK_TIMER_PERIOD_MS ),		/* The timer period, in this case 3000ms (3s). */
									pdTRUE,								/* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
									( void * ) 0,						/* The ID is not used, so can be set to anything. */
									prvCheckTimerCallback				/* The callback function that inspects the status of all the other tasks. */
								  );	
		
		if( xCheckTimer != NULL )
		{
			xTimerStart( xCheckTimer, mainDONT_BLOCK );
		}

		/* This task has to be created last as it keeps account of the number of
		tasks it expects to see running. */
		vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );
	}
	#else /* mainCREATE_SIMPLE_LED_FLASHER_DEMO_ONLY */
	{
		/* Just to prevent compiler warnings when the configuration options are
		set such that these static functions are not used. */
		( void ) vRegTest1Task;
		( void ) vRegTest2Task;
		( void ) prvCheckTimerCallback;
		( void ) prvSetupNestedFPUInterruptsTest;
	}
	#endif /* mainCREATE_SIMPLE_LED_FLASHER_DEMO_ONLY */
}
Esempio n. 20
0
void main( void )
{
	/* Configure the peripherals used by this demo application.  This includes
	configuring the joystick input select button to generate interrupts. */
	prvSetupHardware();

	/* Create the queue used by tasks and interrupts to send strings to the LCD
	task. */
	xLCDQueue = xQueueCreate( mainQUEUE_LENGTH, sizeof( xQueueMessage ) );

	/* If the queue could not be created then don't create any tasks that might
	attempt to use the queue. */
	if( xLCDQueue != NULL )
	{
		/* Create the standard demo tasks. */
		vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED );
		vStartDynamicPriorityTasks();
		vStartGenericQueueTasks( mainGENERIC_QUEUE_TEST_PRIORITY );
		vStartCountingSemaphoreTasks();
		
		/* Note that creating the timer test/demo tasks will fill the timer
		command queue.  This is intentional, and forms part of the test the tasks
		perform.  It does mean however that, after this function is called, no
		more timer commands can be sent until after the scheduler has been
		started (at which point the timer daemon will drained the timer command
		queue, freeing up space for more commands to be received). */
		vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
		
		/* Create the LCD, button poll and register test tasks, as described at
		the top	of this	file. */
		xTaskCreate( prvLCDTask, ( signed char * ) "LCD", configMINIMAL_STACK_SIZE * 2, mainTASK_PARAMETER_CHECK_VALUE, mainLCD_TASK_PRIORITY, NULL );
		xTaskCreate( prvButtonPollTask, ( signed char * ) "BPoll", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
		xTaskCreate( vRegTest1Task, ( signed char * ) "Reg1", configMINIMAL_STACK_SIZE, NULL, 0, NULL );
		xTaskCreate( vRegTest2Task, ( signed char * ) "Reg2", configMINIMAL_STACK_SIZE, NULL, 0, NULL );

		/* Create the 'check' timer - the timer that periodically calls the
		check function as described at the top of this file.  Note that, for
		the reasons stated in the comments above the call to 
		vStartTimerDemoTask(), that the check timer is not actually started 
		until after the scheduler has been started. */
		xCheckTimer = xTimerCreate( ( const signed char * ) "Check timer", mainCHECK_TIMER_PERIOD, pdTRUE, ( void * ) 0, vCheckTimerCallback ); 

		/* Start the scheduler. */
		vTaskStartScheduler();
	}

	/* If all is well then this line will never be reached.  If it is reached
	then it is likely that there was insufficient (FreeRTOS) heap memory space
	to create the idle task.  This may have been trapped by the malloc() failed
	hook function, if one is configured. */	
	for( ;; );
}
Esempio n. 21
0
void main_full( void )
{
	/* Start all the other standard demo/test tasks.  They have no particular
	functionality, but do demonstrate how to use the FreeRTOS API and test the
	kernel port. */
	vStartDynamicPriorityTasks();
	vCreateBlockTimeTasks();
	vStartCountingSemaphoreTasks();
	vStartGenericQueueTasks( tskIDLE_PRIORITY );
	vStartRecursiveMutexTasks();
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
	vStartEventGroupTasks();
	vStartTaskNotifyTask();
	vStartInterruptSemaphoreTasks();

	/* Note - the set of standard demo tasks contains two versions of
	vStartMathTasks.c.  One is defined in flop.c, and uses double precision
	floating point numbers and variables.  The other is defined in sp_flop.c,
	and uses single precision floating point numbers and variables.  The
	MicroBlaze floating point unit only handles single precision floating.
	Therefore, to test the floating point hardware, sp_flop.c should be included
	in this project. */
	vStartMathTasks( mainFLOP_TASK_PRIORITY );

	/* Start the tasks that implements the command console on the UART, as
	described above. */
	vUARTCommandConsoleStart( mainUART_COMMAND_CONSOLE_STACK_SIZE, mainUART_COMMAND_CONSOLE_TASK_PRIORITY );

	/* Register the standard CLI commands. */
	vRegisterSampleCLICommands();

	/* Create the register check tasks, as described at the top of this	file */
	xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvRegTestTaskEntry2, "Reg2", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_2_PARAMETER, tskIDLE_PRIORITY, NULL );

	/* Create the task that performs the 'check' functionality,	as described at
	the top of this file. */
	xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following
	line will never be reached.  If the following line does execute, then
	there was insufficient FreeRTOS heap memory available for the Idle and/or
	timer tasks to be created.  See the memory management section on the
	FreeRTOS web site for more details on the FreeRTOS heap
	http://www.freertos.org/a00111.html. */
	for( ;; );
}
Esempio n. 22
0
int main(void)
{
extern void HardwareSetup( void );

	/* Renesas provided CPU configuration routine.  The clocks are configured in
	here. */
	HardwareSetup();

	/* Turn all LEDs off. */
	vParTestInitialise();

	/* Start the reg test tasks which test the context switching mechanism. */
	xTaskCreate( prvRegTest1Task, "RegTst1", configMINIMAL_STACK_SIZE, ( void * ) mainREG_TEST_1_PARAMETER, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvRegTest2Task, "RegTst2", configMINIMAL_STACK_SIZE, ( void * ) mainREG_TEST_2_PARAMETER, tskIDLE_PRIORITY, NULL );

	/* The web server task. */
	xTaskCreate( vuIP_Task, "uIP", mainuIP_STACK_SIZE, NULL, mainuIP_TASK_PRIORITY, NULL );

	/* Start the check task as described at the top of this file. */
	xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* Create the standard demo tasks. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vCreateBlockTimeTasks();
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
	vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
	vStartQueuePeekTasks();
	vStartRecursiveMutexTasks();
	vStartInterruptQueueTasks();
	vStartMathTasks( mainFLOP_TASK_PRIORITY );

	/* The suicide tasks must be created last as they need to know how many
	tasks were running prior to their creation in order to ascertain whether
	or not the correct/expected number of tasks are running at any given time. */
	vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Start the tasks running. */
	vTaskStartScheduler();

	/* If all is well we will never reach here as the scheduler will now be
	running.  If we do reach here then it is likely that there was insufficient
	heap available for the idle task to be created. */
	for( ;; );
	
	return 0;
}
Esempio n. 23
0
int main()
{
#if 1
	signal(SIGRTMIN+1, &handler);
	raise(SIGRTMIN+1);
#endif

	// Start the standard demo tasks.
	vStartLEDFlashTasks(mainFLASH_PRIORITY | portPRIVILEGE_BIT);
#if 0
	vStartBlockingQueueTasks(mainBLOCK_Q_PRIORITY);
	vCreateBlockTimeTasks();
	vStartGenericQueueTasks(mainGEN_QUEUE_TASK_PRIORITY);
	vStartQueuePeekTasks();
	vStartDynamicPriorityTasks();
#endif
#if 0
	vStartWebserverTask();
#endif

#if 0
	char *name = "testfile";
	int len = strlen(name);
	DIR *dirp = opendir("/sdcard");
	struct dirent *dp;
	while ((dp = readdir(dirp)) != NULL)
		if (dp->d_namlen == len && !strcmp(dp->d_name, name)) {
			(void)closedir(dirp);
			printf("found\n");
		}
	(void)closedir(dirp);
	printf("not_found\n");
#endif

#ifdef CORE_HAS_MPU
	xTaskCreate(xBadTask, (signed char *)"BadTask", configMINIMAL_STACK_SIZE, (void *)NULL, tskIDLE_PRIORITY | portPRIVILEGE_BIT, NULL);
#endif
	xTaskCreate(simpleSerialTask, (signed char *)"Ser", configMINIMAL_STACK_SIZE, (void *)NULL, tskIDLE_PRIORITY | portPRIVILEGE_BIT, NULL);

	printf("Starting scheduler.\n");
	fflush(stdout);

	// Start the scheduler.
	vTaskStartScheduler();

	// Will only get here if there was insufficient memory to create the idle task.
	// Wait for WDT to reset.
	PowerManagement_PowerDown();
}
Esempio n. 24
0
/* Start all the demo application tasks, then start the scheduler. */
void main(void)
{
	/* Initialise the hardware ready for the demo. */
	prvSetupHardware();

	/* Start the standard demo application tasks. */
	vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
	vStartIntegerMathTasks( tskIDLE_PRIORITY );
	vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED - 1 );
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartBlockingQueueTasks ( mainQUEUE_BLOCK_PRIORITY );
	vStartDynamicPriorityTasks();
	vStartMathTasks( tskIDLE_PRIORITY );
	vStartGenericQueueTasks( mainGENERIC_QUEUE_PRIORITY );
	vStartQueuePeekTasks();
	vCreateBlockTimeTasks();
	vStartFlashCoRoutines( mainNUM_FLASH_CO_ROUTINES );

	/* Start the 'Check' task which is defined in this file. */
	xTaskCreate( prvErrorChecks, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* Start the 'Register Test' tasks as described at the top of this file. */
	xTaskCreate( vFirstRegisterTestTask, "Reg1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
	xTaskCreate( vSecondRegisterTestTask, "Reg2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );

	/* Start the task that write trace information to the UART. */
	vUtilityStartTraceTask( mainUTILITY_TASK_PRIORITY );

	/* If we are going to service the watchdog from within a task, then create
	the task here. */
	#if WATCHDOG == WTC_IN_TASK
		vStartWatchdogTask( mainWATCHDOG_TASK_PRIORITY );
	#endif

	/* The suicide tasks must be started last as they record the number of other
	tasks that exist within the system.  The value is then used to ensure at run
	time the number of tasks that exists is within expected bounds. */
	vCreateSuicidalTasks( mainDEATH_PRIORITY );

	/* Now start the scheduler.  Following this call the created tasks should
	be executing. */
	vTaskStartScheduler( );

	/* vTaskStartScheduler() will only return if an error occurs while the
	idle task is being created. */
	for( ;; );
}
Esempio n. 25
0
void main_full( void )
{
	/* Start all the other standard demo/test tasks.  They have no particular
	functionality, but do demonstrate how to use the FreeRTOS API and test the
	kernel port. */
	vStartInterruptQueueTasks();
	vStartDynamicPriorityTasks();
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vCreateBlockTimeTasks();
	vStartCountingSemaphoreTasks();
	vStartGenericQueueTasks( tskIDLE_PRIORITY );
	vStartRecursiveMutexTasks();
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartMathTasks( mainFLOP_TASK_PRIORITY );
	vStartTimerDemoTask( mainTIMER_TEST_PERIOD );
	vStartQueueOverwriteTask( mainQUEUE_OVERWRITE_PRIORITY );
	vStartEventGroupTasks();
	vStartInterruptSemaphoreTasks();
	vStartQueueSetTasks();
	vStartTaskNotifyTask();

	/* Create the register check tasks, as described at the top of this	file */
	xTaskCreate( prvRegTestTaskEntry1, "Reg1", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_1_PARAMETER, tskIDLE_PRIORITY, NULL );
	xTaskCreate( prvRegTestTaskEntry2, "Reg2", configMINIMAL_STACK_SIZE, mainREG_TEST_TASK_2_PARAMETER, tskIDLE_PRIORITY, NULL );

	/* Create the task that performs the 'check' functionality,	as described at
	the top of this file. */
	xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* The set of tasks created by the following function call have to be
	created last as they keep account of the number of tasks they expect to see
	running. */
	vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following
	line will never be reached.  If the following line does execute, then
	there was either insufficient FreeRTOS heap memory available for the idle
	and/or timer tasks to be created, or vTaskStartScheduler() was called from
	User mode.  See the memory management section on the FreeRTOS web site for
	more details on the FreeRTOS heap http://www.freertos.org/a00111.html.  The
	mode from which main() is called is set in the C start up code and must be
	a privileged mode (not user mode). */
	for( ;; );
}
Esempio n. 26
0
void main( void )
{
	InitIrqLevels();		/* Initialize interrupts */
	__set_il( 7 );			/* Allow all levels      */

	prvSetupHardware();

	#if WATCHDOG == WTC_IN_TASK
		vStartWatchdogTask( WTC_TASK_PRIORITY );
	#endif

	/* Start the standard demo application tasks. */
	vStartLEDFlashTasks( mainLED_TASK_PRIORITY );
	vStartIntegerMathTasks( tskIDLE_PRIORITY );
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartBlockingQueueTasks( mainQUEUE_BLOCK_PRIORITY );
	vStartDynamicPriorityTasks();
	vStartFlashCoRoutines( mainNUM_FLASH_CO_ROUTINES );
	vStartGenericQueueTasks( mainGENERIC_QUEUE_PRIORITY );
	vCreateBlockTimeTasks();

	/* The definition INCLUDE_TraceListTasks is set within FreeRTOSConfig.h. */
	#if INCLUDE_TraceListTasks == 1
		vUtilityStartTraceTask( TASK_UTILITY_PRIORITY );
	#else
		vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainCOM_TEST_BAUD_RATE, mainCOM_TEST_LED - 1 );
	#endif

	/* Start the 'Check' task which is defined in this file. */
	xTaskCreate( vErrorChecks, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* The suicide tasks must be started last as they record the number of other
	tasks that exist within the system.  The value is then used to ensure at run
	time the number of tasks that exists is within expected bounds. */
	vCreateSuicidalTasks( mainDEATH_PRIORITY );

	/* Now start the scheduler.  Following this call the created tasks should
	be executing. */
	vTaskStartScheduler( );

	/* vTaskStartScheduler() will only return if an error occurs while the
	idle task is being created. */
	for( ;; );
}
Esempio n. 27
0
File: main.c Progetto: HclX/freertos
/*
 * Creates the majority of the demo application tasks before starting the
 * scheduler.
 */
void main(void)
{
    TaskHandle_t xCreatedTask;

    prvSetupHardware();

    /* Start the reg test tasks which test the context switching mechanism. */
    xTaskCreate( vRegTest1Task, "RegTst1", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, &xCreatedTask );
    xPortUsesFloatingPoint( xCreatedTask );

    xTaskCreate( vRegTest2Task, "RegTst2", configMINIMAL_STACK_SIZE, NULL, tskIDLE_PRIORITY, &xCreatedTask );
    xPortUsesFloatingPoint( xCreatedTask );

    xTaskCreate( vuIP_Task, "uIP", mainuIP_STACK_SIZE, NULL, mainuIP_TASK_PRIORITY, NULL );

    /* Start the check task as described at the top of this file. */
    xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

    /* Start the standard demo tasks.  These don't perform any particular useful
    functionality, other than to demonstrate the FreeRTOS API being used. */
    vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vCreateBlockTimeTasks();
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
    vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
    vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
    vStartQueuePeekTasks();
    vStartRecursiveMutexTasks();

    /* Start the math tasks as described at the top of this file. */
    vStartMathTasks( mainFLOP_TASK_PRIORITY );

    /* The suicide tasks must be created last as they need to know how many
    tasks were running prior to their creation in order to ascertain whether
    or not the correct/expected number of tasks are running at any given time. */
    vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

    /* Start the tasks running. */
    vTaskStartScheduler();

    /* Will only get here if there was insufficient heap memory to create the idle
    task.  Increase the configTOTAL_HEAP_SIZE setting in FreeRTOSConfig.h. */
    for( ;; );
}
Esempio n. 28
0
short main( void )
{
	/* Initialise hardware and utilities. */
	vParTestInitialise();
	vPrintInitialise();
	
	/* CREATE ALL THE DEMO APPLICATION TASKS. */
	prvStartMathTasks();
	vStartComTestTasks( mainCOM_TEST_PRIORITY, serCOM1, ser115200 );
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartBlockingQueueTasks( mainQUEUE_BLOCK_PRIORITY );
	vCreateBlockTimeTasks();
	vStartGenericQueueTasks( mainGENERIC_QUEUE_PRIORITY );
	vStartSemaphoreTasks( mainSEMAPHORE_TASK_PRIORITY );
	vStartDynamicPriorityTasks();
	vStartMultiEventTasks();
	vStartQueuePeekTasks();
	vStartCountingSemaphoreTasks();
	vStartAltGenericQueueTasks( mainGENERIC_QUEUE_PRIORITY );
	vCreateAltBlockTimeTasks();
	vStartAltBlockingQueueTasks( mainQUEUE_BLOCK_PRIORITY );	
	vStartAltPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartRecursiveMutexTasks();
		
	/* Create the "Print" task as described at the top of the file. */
	xTaskCreate( vErrorChecks, "Print", mainPRINT_STACK_SIZE, NULL, mainPRINT_TASK_PRIORITY, NULL );

	/* This task has to be created last as it keeps account of the number of tasks
	it expects to see running. */
	vCreateSuicidalTasks( mainCREATOR_TASK_PRIORITY );

	/* Create the co-routines that flash the LED's. */
	vStartFlashCoRoutines( mainNUM_FLASH_CO_ROUTINES );

	/* Create the co-routines that communicate with the tick hook. */
	vStartHookCoRoutines();

	/* Set the scheduler running.  This function will not return unless a task
	calls vTaskEndScheduler(). */
	vTaskStartScheduler();

	return 1;
}
Esempio n. 29
0
int main( void )
{
#ifdef DEBUG
  debug();
#endif

	prvSetupHardware();

	/* Start the standard demo tasks.  These are just here to exercise the
	kernel port and provide examples of how the FreeRTOS API can be used. */
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
    vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
    vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
    vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartLEDFlashTasks( mainFLASH_TASK_PRIORITY );
    vStartQueuePeekTasks();
    vStartRecursiveMutexTasks();

	/* Create the uIP task.  The WEB server runs in this task. */
    xTaskCreate( vuIP_Task, ( signed char * ) "uIP", mainBASIC_WEB_STACK_SIZE, ( void * ) NULL, mainUIP_TASK_PRIORITY, NULL );

	/* Create the queue used by the LCD task.  Messages for display on the LCD
	are received via this queue. */
	xLCDQueue = xQueueCreate( mainQUEUE_SIZE, sizeof( char * ) );

	/* Start the LCD gatekeeper task - as described in the comments at the top
	of this file. */
	xTaskCreate( prvLCDTask, ( signed char * ) "LCD", configMINIMAL_STACK_SIZE * 2, NULL, mainLCD_TASK_PRIORITY, NULL );

	/* Configure the high frequency interrupt used to measure the interrupt
	jitter time.  When debugging it can be helpful to comment this line out
	to prevent the debugger repeatedly going into the interrupt service
	routine. */
	vSetupHighFrequencyTimer();

    /* Start the scheduler. */
	vTaskStartScheduler();

    /* Will only get here if there was insufficient memory to create the idle
    task.  The idle task is created within vTaskStartScheduler(). */
	for( ;; );
}
Esempio n. 30
0
void main_full( void )
{
TimerHandle_t xCheckTimer = NULL;

	/* The LCD is only used in the Full demo. */
	prvConfigureLCD();

	/* Start all the other standard demo/test tasks.  They have no particular
	functionality, but do demonstrate how to use the FreeRTOS API and test the
	kernel port. */
	vStartDynamicPriorityTasks();
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vCreateBlockTimeTasks();
	vStartCountingSemaphoreTasks();
	vStartGenericQueueTasks( tskIDLE_PRIORITY );
	vStartRecursiveMutexTasks();
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );

	/* Create the software timer that performs the 'check' functionality,
	as described at the top of this file. */
	xCheckTimer = xTimerCreate( "CheckTimer",					/* A text name, purely to help debugging. */
								( mainCHECK_TIMER_PERIOD_MS ),	/* The timer period, in this case 3000ms (3s). */
								pdTRUE,							/* This is an auto-reload timer, so xAutoReload is set to pdTRUE. */
								( void * ) 0,					/* The ID is not used, so can be set to anything. */
								prvCheckTimerCallback			/* The callback function that inspects the status of all the other tasks. */
							  );

	if( xCheckTimer != NULL )
	{
		xTimerStart( xCheckTimer, mainDONT_BLOCK );
	}

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* If all is well, the scheduler will now be running, and the following line
	will never be reached.  If the following line does execute, then there was
	insufficient FreeRTOS heap memory available for the idle and/or timer tasks
	to be created.  See the memory management section on the FreeRTOS web site
	for more details. */
	for( ;; );
}