void
TileModelFactory::createTileModel(const TileKey& key,
const MapFrame& frame,
bool accumulate,
osg::ref_ptr<TileModel>& out_model,
ProgressCallback* progress)
{
osg::ref_ptr<TileModel> model = new TileModel( frame.getRevision(), frame.getMapInfo() );
model->_useParentData = _terrainReqs->parentTexturesRequired();
model->_tileKey = key;
model->_tileLocator = GeoLocator::createForKey(key, frame.getMapInfo());
OE_START_TIMER(fetch_imagery);
// Fetch the image data and make color layers.
unsigned index = 0;
unsigned order = 0;
for( ImageLayerVector::const_iterator i = frame.imageLayers().begin(); i != frame.imageLayers().end(); ++i )
{
ImageLayer* layer = i->get();
if ( layer->getEnabled() && layer->isKeyInRange(key) )
{
BuildColorData build;
build.init( key, layer, order, frame.getMapInfo(), _terrainOptions, _liveTiles.get(), model.get() );
bool addedToModel = build.execute(progress);
if ( addedToModel )
{
// only bump the order if we added something to the data model.
order++;
}
}
}
if (progress)
progress->stats()["fetch_imagery_time"] += OE_STOP_TIMER(fetch_imagery);
// make an elevation layer.
OE_START_TIMER(fetch_elevation);
buildElevation(key, frame, accumulate, _terrainReqs->elevationTexturesRequired(), model.get(), progress);
if (progress)
progress->stats()["fetch_elevation_time"] += OE_STOP_TIMER(fetch_elevation);
// make a normal map layer (if necessary)
if ( _terrainReqs->normalTexturesRequired() )
{
OE_START_TIMER(fetch_normalmap);
buildNormalMap(key, frame, accumulate, model.get(), progress);
if (progress)
progress->stats()["fetch_normalmap_time"] += OE_STOP_TIMER(fetch_normalmap);
}
// If nothing was added, not even a fallback heightfield, something went
// horribly wrong. Leave without a tile model. Chances are that a parent tile
// not not found in the live-tile registry.
if ( model->_colorData.size() == 0 && !model->_elevationData.getHeightField() )
{
return;
}
// OK we are making a tile, so if there's no heightfield yet, make an empty one (and mark it
// as fallback data of course)
if ( !model->_elevationData.getHeightField() )
{
osg::HeightField* hf = HeightFieldUtils::createReferenceHeightField( key.getExtent(), 15, 15 );
model->_elevationData = TileModel::ElevationData(
hf,
GeoLocator::createForKey(key, frame.getMapInfo()),
true );
}
// look up the parent model and cache it.
osg::ref_ptr<TileNode> parentTile;
if ( _liveTiles->get(key.createParentKey(), parentTile) )
{
model->_parentModel = parentTile->getTileModel();
}
out_model = model.release();
}
void
TileModelFactory::createTileModel(const TileKey& key,
osg::ref_ptr<TileModel>& out_model,
bool& out_hasRealData,
bool& out_hasLodBlendedLayers )
{
MapFrame mapf( _map, Map::MASKED_TERRAIN_LAYERS );
const MapInfo& mapInfo = mapf.getMapInfo();
osg::ref_ptr<TileModel> model = new TileModel();
model->_tileKey = key;
model->_tileLocator = GeoLocator::createForKey(key, mapInfo);
// init this to false, then search for real data. "Real data" is data corresponding
// directly to the key, as opposed to fallback data, which is derived from a lower
// LOD key.
out_hasRealData = false;
out_hasLodBlendedLayers = false;
// Fetch the image data and make color layers.
for( ImageLayerVector::const_iterator i = mapf.imageLayers().begin(); i != mapf.imageLayers().end(); ++i )
{
ImageLayer* layer = i->get();
if ( layer->getEnabled() )
{
BuildColorData build;
build.init( key, layer, mapInfo, _terrainOptions, model.get() );
build.execute();
if ( layer->getImageLayerOptions().lodBlending() == true )
{
out_hasLodBlendedLayers = true;
}
}
}
// make an elevation layer.
BuildElevationData build;
build.init( key, mapf, _terrainOptions, model.get(), _hfCache );
build.execute();
// Bail out now if there's no data to be had.
if ( model->_colorData.size() == 0 && !model->_elevationData.getHFLayer() )
{
return;
}
// OK we are making a tile, so if there's no heightfield yet, make an empty one.
if ( !model->_elevationData.getHFLayer() )
{
osg::HeightField* hf = HeightFieldUtils::createReferenceHeightField( key.getExtent(), 8, 8 );
osgTerrain::HeightFieldLayer* hfLayer = new osgTerrain::HeightFieldLayer( hf );
hfLayer->setLocator( GeoLocator::createForKey(key, mapInfo) );
model->_elevationData = TileModel::ElevationData( hfLayer, true );
}
// Now, if there are any color layers that did not get built, create them with an empty
// image so the shaders have something to draw.
osg::ref_ptr<osg::Image> emptyImage;
osgTerrain::Locator* locator = model->_elevationData.getHFLayer()->getLocator();
for( ImageLayerVector::const_iterator i = mapf.imageLayers().begin(); i != mapf.imageLayers().end(); ++i )
{
ImageLayer* layer = i->get();
if ( layer->getEnabled() && !layer->isKeyValid(key) )
{
if ( !emptyImage.valid() )
emptyImage = ImageUtils::createEmptyImage();
model->_colorData[i->get()->getUID()] = TileModel::ColorData(
layer,
emptyImage.get(),
locator,
key.getLevelOfDetail(),
key,
true );
}
}
// Ready to create the actual tile.
//AssembleTile assemble;
//assemble.init( key, mapInfo, _terrainOptions, model.get(), mapf.terrainMaskLayers() );
//assemble.execute();
// if we're using LOD blending, find and add the parent's state set.
if ( out_hasLodBlendedLayers && key.getLevelOfDetail() > 0 && _liveTiles.valid() )
{
osg::ref_ptr<TileNode> parent;
if ( _liveTiles->get( key.createParentKey(), parent ) )
{
model->_parentStateSet = parent->getPublicStateSet();
}
}
if (!out_hasRealData)
{
// Check the results and see if we have any real data.
for( TileModel::ColorDataByUID::const_iterator i = model->_colorData.begin(); i != model->_colorData.end(); ++i )
{
if ( !i->second.isFallbackData() )
{
out_hasRealData = true;
break;
}
}
}
if ( !out_hasRealData && !model->_elevationData.isFallbackData() )
{
out_hasRealData = true;
}
out_model = model.release();
//out_tile = assemble._node;
}
void
TileModelFactory::createTileModel(const TileKey& key,
const MapFrame& frame,
osg::ref_ptr<TileModel>& out_model) //,
//bool& out_hasRealData)
{
osg::ref_ptr<TileModel> model = new TileModel( frame.getRevision(), frame.getMapInfo() );
model->_tileKey = key;
model->_tileLocator = GeoLocator::createForKey(key, frame.getMapInfo());
// Fetch the image data and make color layers.
unsigned order = 0;
for( ImageLayerVector::const_iterator i = frame.imageLayers().begin(); i != frame.imageLayers().end(); ++i )
{
ImageLayer* layer = i->get();
if ( layer->getEnabled() )
{
BuildColorData build;
build.init( key, layer, order, frame.getMapInfo(), _terrainOptions, model.get() );
bool addedToModel = build.execute();
if ( addedToModel )
{
// only bump the order if we added something to the data model.
order++;
}
}
}
// make an elevation layer.
BuildElevationData build;
build.init( key, frame, _terrainOptions, model.get(), _hfCache );
build.execute();
// Bail out now if there's no data to be had.
if ( model->_colorData.size() == 0 && !model->_elevationData.getHeightField() )
{
return;
}
// OK we are making a tile, so if there's no heightfield yet, make an empty one (and mark it
// as fallback data of course)
if ( !model->_elevationData.getHeightField() )
{
osg::HeightField* hf = HeightFieldUtils::createReferenceHeightField( key.getExtent(), 15, 15 );
model->_elevationData = TileModel::ElevationData(
hf,
GeoLocator::createForKey(key, frame.getMapInfo()),
true );
}
// look up the parent model and cache it.
osg::ref_ptr<TileNode> parentTile;
if ( _liveTiles->get(key.createParentKey(), parentTile) )
model->_parentModel = parentTile->getTileModel();
out_model = model.release();
}
void
TileModelFactory::createTileModel(const TileKey& key,
osg::ref_ptr<TileModel>& out_model,
bool& out_hasRealData)
{
MapFrame mapf( _map, Map::MASKED_TERRAIN_LAYERS );
const MapInfo& mapInfo = mapf.getMapInfo();
osg::ref_ptr<TileModel> model = new TileModel();
model->_map = _map;
model->_tileKey = key;
model->_tileLocator = GeoLocator::createForKey(key, mapInfo);
// init this to false, then search for real data. "Real data" is data corresponding
// directly to the key, as opposed to fallback data, which is derived from a lower
// LOD key.
out_hasRealData = false;
// Fetch the image data and make color layers.
unsigned order = 0;
for( ImageLayerVector::const_iterator i = mapf.imageLayers().begin(); i != mapf.imageLayers().end(); ++i )
{
ImageLayer* layer = i->get();
if ( layer->getEnabled() )
{
BuildColorData build;
build.init( key, layer, order, mapInfo, _terrainOptions, model.get() );
bool addedToModel = build.execute();
if ( addedToModel )
{
// only bump the order if we added something to the data model.
order++;
}
}
}
// make an elevation layer.
BuildElevationData build;
build.init( key, mapf, _terrainOptions, model.get(), _hfCache );
build.execute();
// Bail out now if there's no data to be had.
if ( model->_colorData.size() == 0 && !model->_elevationData.getHeightField() )
{
return;
}
// OK we are making a tile, so if there's no heightfield yet, make an empty one.
if ( !model->_elevationData.getHeightField() )
{
osg::HeightField* hf = HeightFieldUtils::createReferenceHeightField( key.getExtent(), 8, 8 );
model->_elevationData = TileModel::ElevationData(
hf,
GeoLocator::createForKey(key, mapInfo),
true );
}
if (!out_hasRealData)
{
// Check the results and see if we have any real data.
for( TileModel::ColorDataByUID::const_iterator i = model->_colorData.begin(); i != model->_colorData.end(); ++i )
{
if ( !i->second.isFallbackData() )
{
out_hasRealData = true;
break;
}
}
}
if ( !out_hasRealData && !model->_elevationData.isFallbackData() )
{
out_hasRealData = true;
}
// look up the parent model and cache it.
osg::ref_ptr<TileNode> parentTile;
if ( _liveTiles->get(key.createParentKey(), parentTile) )
model->_parentModel = parentTile->getTileModel();
out_model = model.release();
}