LRESULT InitD3D(HWND hWnd)
{
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
return E_FAIL;
D3DDISPLAYMODE d3ddm;
if( FAILED( g_pD3D->GetAdapterDisplayMode( D3DADAPTER_DEFAULT, &d3ddm ) ) )
return E_FAIL;
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.BackBufferCount = 2;
d3dpp.MultiSampleType = D3DMULTISAMPLE_NONE;
d3dpp.MultiSampleQuality =0;
d3dpp.SwapEffect = D3DSWAPEFFECT_FLIP;
d3dpp.BackBufferFormat = d3ddm.Format;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
d3dpp.Flags = D3DPRESENTFLAG_DISCARD_DEPTHSTENCIL;
d3dpp.PresentationInterval = D3DPRESENT_INTERVAL_IMMEDIATE;
if(theViewer.getFullscreen())
{
d3dpp.Windowed = FALSE;
d3dpp.BackBufferWidth=theViewer.getWidth();
d3dpp.BackBufferHeight=theViewer.getHeight();
}
D3DCAPS9 Caps;
g_pD3D->GetDeviceCaps(D3DADAPTER_DEFAULT,D3DDEVTYPE_HAL,&Caps);
if((Caps.TextureOpCaps & D3DTEXOPCAPS_DOTPRODUCT3) == 0)
{
MessageBox(hWnd,
"Your 3D Card don't support DOT3 operation, bumpmapping is disabled",
"Warning",MB_OK);
g_bCanDot3=false;
}
if(Caps.VertexShaderVersion >= D3DVS_VERSION(1,1))
{
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_HARDWARE_VERTEXPROCESSING,
&d3dpp, &g_pD3DDevice ) ) )
return E_FAIL;
}
else
{
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pD3DDevice ) ) )
return E_FAIL;
}
return S_OK;
}
BOOL InitD3D(HWND hwnd)
{
HRESULT hr;
D3DDISPLAYMODE disp_mode;
D3DPRESENT_PARAMETERS pp;
if (g_bSetupOK) return TRUE;
if (g_pD3D) return FALSE;
g_pD3D = Direct3DCreate9(D3D_SDK_VERSION);
if (!g_pD3D) return FALSE;
hr = g_pD3D->GetAdapterDisplayMode(D3DADAPTER_DEFAULT, &disp_mode);
if (FAILED(hr))
{
g_pD3D->Release();
g_pD3D = NULL;
return FALSE;
}
ZeroMemory(&pp, sizeof(D3DPRESENT_PARAMETERS));
pp.Windowed = true;
pp.SwapEffect = D3DSWAPEFFECT_DISCARD;
pp.BackBufferFormat = disp_mode.Format;
pp.EnableAutoDepthStencil = TRUE;
pp.AutoDepthStencilFormat = D3DFMT_D16;
pp.BackBufferCount = 1;
BOOL flgSoft = GetPrivateProfileInt("GENERIC","LEVEL",1,".\\TDWGame.ini");
char buff[256];
wsprintf(buff,"%d",flgSoft);
WritePrivateProfileString("GENERIC","LEVEL",buff,".\\TDWGame.ini");
hr = g_pD3D->CreateDevice(D3DADAPTER_DEFAULT,D3DDEVTYPE_HAL,hwnd,D3DCREATE_HARDWARE_VERTEXPROCESSING,&pp,&g_pD3DDevice);
if (FAILED(hr))
{
hr = g_pD3D->CreateDevice(D3DADAPTER_DEFAULT,D3DDEVTYPE_HAL,hwnd,D3DCREATE_SOFTWARE_VERTEXPROCESSING,&pp,&g_pD3DDevice);
if (FAILED(hr))
{
hr = g_pD3D->CreateDevice(D3DADAPTER_DEFAULT,D3DDEVTYPE_REF,hwnd,D3DCREATE_SOFTWARE_VERTEXPROCESSING,&pp,&g_pD3DDevice);
if (FAILED(hr))
{
g_pD3D->Release();
g_pD3D = NULL;
return FALSE;
}
}
}
D3DCAPS9 DX9DCaps;
g_pD3DDevice->GetDeviceCaps(&DX9DCaps);
g_bSetupOK = TRUE;
return TRUE;
}
LRESULT InitD3D(HWND hWnd)
{
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
return E_FAIL;
D3DDISPLAYMODE d3ddm;
if( FAILED( g_pD3D->GetAdapterDisplayMode( D3DADAPTER_DEFAULT, &d3ddm ) ) )
return E_FAIL;
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.BackBufferCount = 2;
d3dpp.MultiSampleType = D3DMULTISAMPLE_NONE;
d3dpp.MultiSampleQuality =0;
d3dpp.SwapEffect = D3DSWAPEFFECT_FLIP;
d3dpp.BackBufferFormat = d3ddm.Format;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
d3dpp.Flags = D3DPRESENTFLAG_DISCARD_DEPTHSTENCIL;
d3dpp.PresentationInterval = D3DPRESENT_INTERVAL_IMMEDIATE;
if(theViewer.getFullscreen())
{
d3dpp.Windowed = FALSE;
d3dpp.BackBufferWidth=theViewer.getWidth();
d3dpp.BackBufferHeight=theViewer.getHeight();
}
D3DCAPS9 Caps;
g_pD3D->GetDeviceCaps(D3DADAPTER_DEFAULT,D3DDEVTYPE_HAL,&Caps);
if(Caps.DevCaps & D3DDEVCAPS_HWTRANSFORMANDLIGHT)
{
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_HARDWARE_VERTEXPROCESSING,
&d3dpp, &g_pD3DDevice ) ) )
return E_FAIL;
}
else
{
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pD3DDevice ) ) )
return E_FAIL;
}
return S_OK;
}
bool InitDX(HWND hwnd)
{
g_pD3D=Direct3DCreate9(D3D_SDK_VERSION);
if(g_pD3D==NULL){
OutputDebugString("failed -Direct3DCreate9()");
}
HRESULT hr;
D3DDISPLAYMODE d3ddm;
hr=g_pD3D->GetAdapterDisplayMode(D3DADAPTER_DEFAULT,&d3ddm);
if(FAILED(hr)){
OutputDebugString("InitD3D failed -GetAdapterDisplayMode() failed");
return false;
}
//プレゼンテーションパラメータの設定
D3DPRESENT_PARAMETERS D3DPP;
ZeroMemory(&D3DPP,sizeof(D3DPRESENT_PARAMETERS));
D3DPP.BackBufferCount=1;
if(ISFULLSCREENED){
D3DPP.Windowed = false;
D3DPP.BackBufferWidth = DEFAULT_CLIANT_WIDTH;
D3DPP.BackBufferHeight = DEFAULT_CLIANT_HEIGHT;
}
else{
D3DPP.Windowed=true;
}
D3DPP.BackBufferFormat = d3ddm.Format;
D3DPP.SwapEffect = D3DSWAPEFFECT_DISCARD;
D3DPP.EnableAutoDepthStencil = true;
D3DPP.AutoDepthStencilFormat = D3DFMT_D16;
D3DPP.Flags = true;
D3DPP.PresentationInterval = D3DPRESENT_INTERVAL_ONE;
//デバイスオブジェクトの作成
if(FAILED(g_pD3D->CreateDevice(D3DADAPTER_DEFAULT,D3DDEVTYPE_HAL,hwnd,D3DCREATE_HARDWARE_VERTEXPROCESSING,&D3DPP,&g_pD3DDev))){
if(FAILED(g_pD3D->CreateDevice(D3DADAPTER_DEFAULT,D3DDEVTYPE_HAL,hwnd,D3DCREATE_SOFTWARE_VERTEXPROCESSING,&D3DPP,&g_pD3DDev))){
if(FAILED(g_pD3D->CreateDevice(D3DADAPTER_DEFAULT,D3DDEVTYPE_REF,hwnd,D3DCREATE_SOFTWARE_VERTEXPROCESSING,&D3DPP,&g_pD3DDev))){
OutputDebugString("InitD3D failed -デバイスオブジェクトの作成に失敗 \n");
return false;
}
}
}
g_pD3DDev->CreateTexture(SCREEN_WIDTH, SCREEN_HEIGHT, 1,D3DUSAGE_DYNAMIC, D3DFMT_A8R8G8B8,D3DPOOL_DEFAULT,&g_tex, NULL);
return true;
}
/**-----------------------------------------------------------------------------
* Direct3D 초기화
*------------------------------------------------------------------------------
*/
HRESULT InitD3D( HWND hWnd )
{
// 디바이스를 생성하기위한 D3D객체 생성
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
return E_FAIL;
// 디바이스를 생성할 구조체
// 복잡한 오브젝트를 그릴것이기때문에, 이번에는 Z버퍼가 필요하다.
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
D3DCAPS9 caps;
DWORD dwPSProcess;
// 디바이스의 능력값(caps)을 읽어온다
g_pD3D->GetDeviceCaps( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, &caps );
// 지원하는 픽셀쉐이더 버전이 1.0이하라면 REF드라이버를, 1.0이상이면 HW드라이버를 생성한다.
dwPSProcess = ( caps.PixelShaderVersion < D3DPS_VERSION(1,0) ) ? 0 : 1;
if( dwPSProcess )
{
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_HARDWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
return E_FAIL;
}
else
{
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_REF, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
return E_FAIL;
}
// 기본컬링, CCW
g_pd3dDevice->SetRenderState( D3DRS_CULLMODE, D3DCULL_CCW );
// Z버퍼기능을 켠다.
g_pd3dDevice->SetRenderState( D3DRS_ZENABLE, TRUE );
return S_OK;
}
HRESULT init3D(HWND hWnd){
if(NULL == (g_pD3D = Direct3DCreate9(D3D_SDK_VERSION)))
return E_FAIL;
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pDevice ) ) )
return E_FAIL;
//open the z test
g_pDevice->SetRenderState(D3DRS_ZENABLE, true);
//set the test method
g_pDevice->SetRenderState(D3DRS_ZFUNC, D3DCMP_LESS); //default is LESSQUAL
g_pDevice->SetRenderState(D3DRS_ZWRITEENABLE, TRUE);//default
g_pDevice->SetRenderState(D3DRS_AMBIENT, 0xffffffff);
setWorldMatrix();
setViewProjMatrix();
D3DXMatrixIdentity(&g_matTank);
D3DXMatrixRotationY(&g_matTank, D3DX_PI / 2);
D3DXMatrixIdentity(&g_matShutter);
return S_OK;
}
HRESULT InitD3D( HWND hWnd )
{
// Create the D3D object, which is needed to create the D3DDevice.
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
{
MessageBoxA(NULL, "Create D3D9 object failed!", "Error", 0) ;
return E_FAIL;
}
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE; // use window mode, not full screen
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
// Create device
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
{
MessageBoxA(NULL, "Create D3D9 device failed!", "Error", 0) ;
return E_FAIL;
}
// Disable lighting, since we didn't specify color for vertex
g_pd3dDevice->SetRenderState( D3DRS_LIGHTING , FALSE );
// Create teapot
D3DXCreateTeapot(g_pd3dDevice, &g_pTeapotMesh, NULL) ;
return S_OK;
}
HRESULT InitD3D( HWND hWnd )
{
// Create the D3D object, which is needed to create the D3DDevice.
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
return E_FAIL;
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
// Create device
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
{
return E_FAIL;
}
// Wire frame mode.
g_pd3dDevice->SetRenderState(D3DRS_FILLMODE, D3DFILL_WIREFRAME) ;
// Disable lighting.
g_pd3dDevice->SetRenderState( D3DRS_LIGHTING , FALSE );
// Create geometries.
D3DXCreateTeapot(g_pd3dDevice, &g_pMeshes[0], NULL) ; // Teapot
D3DXCreateSphere(g_pd3dDevice, 1.2f, 20, 20, &g_pMeshes[1], NULL) ; // Sphere
D3DXCreateCylinder(g_pd3dDevice, 1.0f, 1.0f, 2.0f, 20, 5, &g_pMeshes[2], NULL) ; // Cylinder
D3DXCreateTorus(g_pd3dDevice, 0.5f, 1.0f, 15, 15, &g_pMeshes[3], NULL) ; // Torus
return S_OK;
}
//-----------------------------------------------------------------------------
// Name: InitD3D()
// Desc: Initializes Direct3D
//-----------------------------------------------------------------------------
HRESULT InitD3D( HWND hWnd )
{
// Create the D3D object.
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
return E_FAIL;
// Set up the structure used to create the D3DDevice. Since we are now
// using more complex geometry, we will create a device with a zbuffer.
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof( d3dpp ) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
// Create the D3DDevice
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
{
return E_FAIL;
}
// Turn off culling
g_pd3dDevice->SetRenderState( D3DRS_CULLMODE, D3DCULL_NONE );
// Turn off D3D lighting
g_pd3dDevice->SetRenderState( D3DRS_LIGHTING, FALSE );
// Turn on the zbuffer
g_pd3dDevice->SetRenderState( D3DRS_ZENABLE, TRUE );
return S_OK;
}
HRESULT InitD3D( HWND hWnd )
{
// Create the D3D object, which is needed to create the D3DDevice.
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
{
MessageBoxA(NULL, "Create D3D9 object failed!", "Error", 0) ;
return E_FAIL;
}
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE; // use window mode, not full screen
d3dpp.BackBufferCount = 1 ;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
d3dpp.EnableAutoDepthStencil = TRUE ;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16 ;
// Create device
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
{
MessageBoxA(NULL, "Create D3D9 device failed!", "Error", 0) ;
return E_FAIL;
}
return S_OK;
}
bool init(HWND hWnd)
{
g_pD3D = Direct3DCreate9(D3D_SDK_VERSION);
if(!g_pD3D) {
return false;
}
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory(&d3dpp, sizeof(d3dpp));
d3dpp.Windowed = true;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
g_pD3D->CreateDevice(D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_HARDWARE_VERTEXPROCESSING, &d3dpp, &g_pd3dDevice);
if(!g_pd3dDevice) {
return false;
}
g_pd3dDevice->SetRenderState(D3DRS_FILLMODE, D3DFILL_WIREFRAME);
D3DXCreateSphere(g_pd3dDevice, OBJECT_SIZE, OBJECT_PRECESSION, OBJECT_PRECESSION, &g_pSphereMesh, 0);
D3DXCreateBox(g_pd3dDevice, OBJECT_SIZE, OBJECT_SIZE, OBJECT_SIZE, &g_pCubeMesh, 0);
D3DXCreateTorus(g_pd3dDevice, OBJECT_SIZE / OBJECT_SIZE, OBJECT_SIZE, OBJECT_PRECESSION / (UINT) OBJECT_SIZE, OBJECT_PRECESSION, &g_pTorusMesh, 0);
return true;
}
bool Game_Init(HWND window)
{
d3d = Direct3DCreate9(D3D_SDK_VERSION);
if (d3d == NULL)
{
MessageBox(window, "Error initializing Direct3D", "Error", MB_OK);
return 0;
}
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory(&d3dpp, sizeof(d3dpp));
d3dpp.Windowed = FALSE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
d3dpp.BackBufferCount = 1;
d3dpp.BackBufferWidth = SCREENW;
d3dpp.BackBufferHeight = SCREENH;
d3dpp.hDeviceWindow = window;
d3d->CreateDevice(
D3DADAPTER_DEFAULT,
D3DDEVTYPE_HAL,
window,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp,
&d3ddev);
if (d3ddev == NULL)
{
MessageBox(window, "Error creating Direct3D device", "Error", MB_OK);
return 0;
}
return true;
}
HRESULT InitD3D( HWND hWnd )
{
if ( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
{
return E_FAIL;
}
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof( d3dpp ) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
if ( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &g_pd3dDevice ) ) )
{
return E_FAIL;
}
g_pd3dDevice->SetRenderState( D3DRS_CULLMODE, D3DCULL_NONE );
g_pd3dDevice->SetRenderState( D3DRS_ZENABLE, TRUE );
return S_OK;
}
HRESULT InitD3D( HWND hWnd )
{
g_pD3D = Direct3DCreate9( D3D_SDK_VERSION );
if( !g_pD3D ) return E_FAIL;
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
d3dpp.EnableAutoDepthStencil = true; // Direct3D manages the depth buffer
d3dpp.AutoDepthStencilFormat = D3DFMT_D16; // 깊이버퍼 형식이 오게됨.
// http://msdn.microsoft.com/en-us/library/windows/desktop/bb172558%28v=vs.85%29.aspx 의 Buffer flags 참조
if( FAILED( g_pD3D->CreateDevice(
D3DADAPTER_DEFAULT,
D3DDEVTYPE_HAL,
hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
{
return E_FAIL;
}
g_pd3dDevice->SetRenderState( D3DRS_CULLMODE, D3DCULL_NONE );
// Z버퍼 켜기
g_pd3dDevice->SetRenderState( D3DRS_ZENABLE, true );
return S_OK;
}
//-----------------------------------------------------------------------------
// Name: InitD3D()
// Desc: Initializes Direct3D
//-----------------------------------------------------------------------------
HRESULT InitD3D( HWND hWnd )
{
int nOutputWindowID;
g_pD3D = Direct3DCreate9( D3D_SDK_VERSION );
D3DDISPLAYMODE d3ddm;
g_pD3D->GetAdapterDisplayMode( D3DADAPTER_DEFAULT, &d3ddm );
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = d3ddm.Format;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
d3dpp.PresentationInterval = D3DPRESENT_INTERVAL_IMMEDIATE;
g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice );
g_cEngineMemStack.Initialize( KG3DMEM_LEQUAL_32M );
g_hWnd = hWnd;
return S_OK;
}
int Init_Direct3D(HWND hwnd, int width, int height, int fullscreen)
{
d3d = Direct3DCreate9(D3D_SDK_VERSION);
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory(&d3dpp, sizeof(d3dpp));
d3dpp.Windowed = (!fullscreen);
d3dpp.SwapEffect = D3DSWAPEFFECT_COPY;
d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
d3dpp.BackBufferCount = 1;
d3dpp.BackBufferWidth = 800;
d3dpp.BackBufferHeight = 600;
d3dpp.hDeviceWindow = hwnd;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
d3dpp.PresentationInterval = D3DPRESENT_INTERVAL_IMMEDIATE;
d3d->CreateDevice(
D3DADAPTER_DEFAULT,
D3DDEVTYPE_HAL,
hwnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp,
&d3ddev);
d3ddev->Clear(0, NULL, D3DCLEAR_TARGET, D3DCOLOR_XRGB(0,0,0), 1.0f, 0);
d3ddev->GetBackBuffer(0, 0, D3DBACKBUFFER_TYPE_MONO, &backbuffer);
return 1;
}
//-----------------------------------------------------------------------------
// Name: init_1()
// Desc:
//-----------------------------------------------------------------------------
void init_1( void )
{
HWND window;
if(!windowed)
{
window = g_hWnd_1;
}
else
{
window = g_hWnd_0;
}
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = windowed;
d3dpp.hDeviceWindow = window;
d3dpp.SwapEffect = D3DSWAPEFFECT_FLIP;
d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
d3dpp.BackBufferWidth = SCREEN_WIDTH; // set the width of the buffer
d3dpp.BackBufferHeight = SCREEN_HEIGHT; // set the height of the buffer
d3dpp.BackBufferCount = 1;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
d3dpp.PresentationInterval = D3DPRESENT_INTERVAL_ONE;
g_pD3D->CreateDevice( 1, D3DDEVTYPE_HAL, window, D3DCREATE_HARDWARE_VERTEXPROCESSING, &d3dpp, &g_pd3dDevice_1 );
}
bool initializeD3D(HWND hwnd) {
//创建一个d3d管理器
d3dManager = Direct3DCreate9(D3D_SDK_VERSION);
if (d3dManager == NULL)
return false;
//创建一份d3d配置
D3DPRESENT_PARAMETERS d3dCfg = {};
d3dCfg.Windowed = TRUE;
d3dCfg.BackBufferWidth = 1024;
d3dCfg.BackBufferHeight = 768;
d3dCfg.SwapEffect = D3DSWAPEFFECT_DISCARD;
D3DDISPLAYMODE displayMode;//用d3d管理器读取显示器显示模式
if (FAILED(d3dManager->GetAdapterDisplayMode(D3DADAPTER_DEFAULT, &displayMode)))
return false;
d3dCfg.BackBufferFormat = displayMode.Format;
//用d3d管理器根据d3d配置创建一个d3d设备
if (FAILED(d3dManager->CreateDevice(D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL,
hwnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dCfg, &d3dDevice)))
return false;
if (!initializeObj())
return false;
return true;
}
HRESULT InitD3D( HWND hWnd )
{
if ( nullptr == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
{
return E_FAIL;
}
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof( d3dpp ) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
if ( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd, D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &g_pD3DDevice ) ) )
{
return E_FAIL;
}
D3DXCreateFont( g_pD3DDevice, 15, 0, FW_NORMAL, 1, FALSE, DEFAULT_CHARSET, OUT_DEFAULT_PRECIS, DEFAULT_QUALITY, DEFAULT_PITCH | FF_DONTCARE, L"돋음체", &g_pFont );
g_pD3DDevice->SetRenderState( D3DRS_CULLMODE, D3DCULL_CCW );
g_pD3DDevice->SetRenderState( D3DRS_ZENABLE, TRUE );
return S_OK;
}
// this function initializes and prepares Direct3D for use
void initD3D(HWND hWnd)
{
d3d = Direct3DCreate9(D3D_SDK_VERSION);
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory(&d3dpp, sizeof(d3dpp));
d3dpp.Windowed = TRUE;
d3dpp.hDeviceWindow = hWnd;
d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
d3dpp.BackBufferWidth = SCREEN_WIDTH;
d3dpp.BackBufferHeight = SCREEN_HEIGHT;
d3dpp.PresentationInterval = D3DPRESENT_INTERVAL_IMMEDIATE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
d3dpp.EnableAutoDepthStencil = TRUE;
setAA(d3dpp);
// create a device class using this information and the info from the d3dpp stuct
HRESULT r = d3d->CreateDevice(D3DADAPTER_DEFAULT,
D3DDEVTYPE_HAL,
hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp,
&d3ddev);
init_graphics(); // call the function to initialize the triangle
d3ddev->SetRenderState(D3DRS_LIGHTING, FALSE);
//d3ddev->SetRenderState(D3DRS_MULTISAMPLEANTIALIAS, TRUE);
d3ddev->SetRenderState(D3DRS_ZENABLE, D3DZB_TRUE);
d3ddev->SetRenderState(D3DRS_CULLMODE, D3DCULL_NONE);
}
HRESULT InitD3D( HWND hWnd )
{
// Create the D3D object, which is needed to create the D3DDevice.
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
return E_FAIL;
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
// Create device
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
{
return E_FAIL;
}
// Turn off culling, so we see the front and back of the triangle
g_pd3dDevice->SetRenderState( D3DRS_CULLMODE, D3DCULL_NONE );
// Wire frame mode
g_pd3dDevice->SetRenderState(D3DRS_FILLMODE, D3DFILL_WIREFRAME);
//g_pd3dDevice->SetRenderState(D3DRS_FILLMODE, D3DFILL_WIREFRAME);
g_pd3dDevice->SetRenderState( D3DRS_LIGHTING , FALSE );
// Create a torus
D3DXCreateTorus(g_pd3dDevice, 1.0f, 2.0f, 20, 20, &g_pTorusMesh, NULL);
return S_OK;
}
//-----------------------------------------------------------------------------
// Desc: 初始化Direct3D
//-----------------------------------------------------------------------------
HRESULT InitD3D( HWND hWnd )
{
//创建Direct3D对象, 该对象用于创建Direct3D设备对象
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
return E_FAIL;
//设置D3DPRESENT_PARAMETERS结构, 准备创建Direct3D设备对象
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
//创建Direct3D设备对象
if( FAILED( g_pD3D->CreateDevice(
D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
return E_FAIL;
//设置剔出模式为不剔出任何面
g_pd3dDevice->SetRenderState(D3DRS_CULLMODE, D3DCULL_NONE);
//设置图元填充模式为线框模式
g_pd3dDevice->SetRenderState(D3DRS_FILLMODE, D3DFILL_WIREFRAME);
return S_OK;
}
//-----------------------------------------------------------------------------
// Name: InitD3D()
// Desc: Initializes Direct3D
//-----------------------------------------------------------------------------
HRESULT CDlg::InitD3D( HWND hWnd )
{
// Create the D3D object.
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
return E_FAIL;
// Set up the structure used to create the D3DDevice
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
// Create the D3DDevice
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
{
return E_FAIL;
}
// Device state would normally be set here
return S_OK;
}
void setup( void )
{
// ---- direct3d initialisation ----
g_pD3D = Direct3DCreate9( D3D_SDK_VERSION );
// ---- display mode ----
D3DDISPLAYMODE d3ddm;
g_pD3D->GetAdapterDisplayMode( D3DADAPTER_DEFAULT, &d3ddm );
ZeroMemory( &g_d3dpp, sizeof(g_d3dpp) );
// ---- set present parameters ----
g_d3dpp.Windowed = TRUE;
g_d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
g_d3dpp.BackBufferFormat = d3ddm.Format;
g_d3dpp.EnableAutoDepthStencil = TRUE;
g_d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
g_d3dpp.PresentationInterval = D3DPRESENT_INTERVAL_IMMEDIATE;
// ---- create the d3d device ----
g_pD3D->CreateDevice( D3DADAPTER_DEFAULT,
D3DDEVTYPE_HAL,
g_hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&g_d3dpp,
&g_pd3dDevice
);
}
/**
** Direct3D initialization
**/
bool Direct3D_Init(HWND window, int width, int height, bool fullscreen)
{
//initialize Direct3D
d3d = Direct3DCreate9(D3D_SDK_VERSION);
if (!d3d) return false;
//set Direct3D presentation parameters
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory(&d3dpp, sizeof(d3dpp));
d3dpp.Windowed = (!fullscreen);
d3dpp.SwapEffect = D3DSWAPEFFECT_COPY;
d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
d3dpp.BackBufferCount = 1;
d3dpp.BackBufferWidth = width;
d3dpp.BackBufferHeight = height;
d3dpp.hDeviceWindow = window;
//create Direct3D device
d3d->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, window,
D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &d3ddev);
if (!d3ddev) return false;
//get a pointer to the back buffer surface
d3ddev->GetBackBuffer(0, 0, D3DBACKBUFFER_TYPE_MONO, &backbuffer);
return true;
}
/**-----------------------------------------------------------------------------
* Direct3D 초기화
*------------------------------------------------------------------------------
*/
HRESULT InitD3D( HWND hWnd )
{
// 디바이스를 생성하기위한 D3D객체 생성
if ( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
{
return E_FAIL;
}
// 디바이스를 생성할 구조체
// 복잡한 오브젝트를 그릴것이기때문에, 이번에는 Z버퍼가 필요하다.
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
d3dpp.EnableAutoDepthStencil = TRUE;
d3dpp.AutoDepthStencilFormat = D3DFMT_D16;
/// 디바이스 생성
if ( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &g_pd3dDevice ) ) )
{
return E_FAIL;
}
// 기본컬링, CCW
g_pd3dDevice->SetRenderState( D3DRS_CULLMODE, D3DCULL_CCW );
// Z버퍼기능을 켠다.
g_pd3dDevice->SetRenderState( D3DRS_ZENABLE, TRUE );
return S_OK;
}
bool Direct3D_Init(HWND window, int width, int height, bool fullscreen)
{
//initialize Direct3D
d3d = Direct3DCreate9(D3D_SDK_VERSION);
if (!d3d) return false;
//set Direct3D presentation parameters
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory(&d3dpp, sizeof(d3dpp));
d3dpp.hDeviceWindow = window;
d3dpp.Windowed = (!fullscreen);
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.EnableAutoDepthStencil = 1;
d3dpp.AutoDepthStencilFormat = D3DFMT_D24S8;
d3dpp.Flags = D3DPRESENTFLAG_DISCARD_DEPTHSTENCIL;
d3dpp.PresentationInterval = D3DPRESENT_INTERVAL_IMMEDIATE;
d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
d3dpp.BackBufferCount = 1;
d3dpp.BackBufferWidth = width;
d3dpp.BackBufferHeight = height;
//create Direct3D device
d3d->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, window,
D3DCREATE_SOFTWARE_VERTEXPROCESSING, &d3dpp, &d3ddev);
if (!d3ddev) return false;
//get a pointer to the back buffer surface
d3ddev->GetBackBuffer(0, 0, D3DBACKBUFFER_TYPE_MONO, &backbuffer);
//create sprite object
D3DXCreateSprite(d3ddev, &spriteobj);
return 1;
}
HRESULT InitD3D( HWND hWnd )
{
// Create the D3D object, which is needed to create the D3DDevice.
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
{
MessageBoxA(NULL, "Create D3D9 object failed!", "Error", 0) ;
return E_FAIL;
}
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE; // use window mode, not full screen
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
// Create device
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
{
MessageBoxA(NULL, "Create D3D9 device failed!", "Error", 0) ;
return E_FAIL;
}
// Create teapot
D3DXCreateTeapot(g_pd3dDevice, &g_pTeapotMesh, NULL) ;
// Create vertex buffer
InitVB();
return S_OK;
}
//-----------------------------------------------------------------------------
// Name: InitD3D()
// Desc: Initializes Direct3D
//-----------------------------------------------------------------------------
HRESULT InitD3D( HWND hWnd )
{
// Create the D3D object.
if( NULL == ( g_pD3D = Direct3DCreate9( D3D_SDK_VERSION ) ) )
return E_FAIL;
// Set up the structure used to create the D3DDevice
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory( &d3dpp, sizeof(d3dpp) );
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.BackBufferFormat = D3DFMT_UNKNOWN;
// Create the D3DDevice
if( FAILED( g_pD3D->CreateDevice( D3DADAPTER_DEFAULT, D3DDEVTYPE_HAL, hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp, &g_pd3dDevice ) ) )
{
return E_FAIL;
}
// Turn off culling, so we see the front and back of the triangle
// 关闭剔除，以便三角形的前后都能被我们看到
g_pd3dDevice->SetRenderState( D3DRS_CULLMODE, D3DCULL_NONE );
// Turn off D3D lighting, since we are providing our own vertex colors
// 关闭D3D光照，因为我们提供我们自己的顶点颜色
g_pd3dDevice->SetRenderState( D3DRS_LIGHTING, FALSE );
return S_OK;
}
// this function initializes and prepares Direct3D for use
void initD3D(HWND hWnd)
{
d3d = Direct3DCreate9(D3D_SDK_VERSION);
D3DPRESENT_PARAMETERS d3dpp;
ZeroMemory(&d3dpp, sizeof(d3dpp));
d3dpp.Windowed = TRUE;
d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
d3dpp.hDeviceWindow = hWnd;
d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
d3dpp.BackBufferWidth = SCREEN_WIDTH;
d3dpp.BackBufferHeight = SCREEN_HEIGHT;
d3dpp.EnableAutoDepthStencil = TRUE; // automatically run the z-buffer for us
d3dpp.AutoDepthStencilFormat = D3DFMT_D16; // 16-bit pixel format for the z-buffer
// create a device class using this information and the info from the d3dpp stuct
d3d->CreateDevice(D3DADAPTER_DEFAULT,
D3DDEVTYPE_HAL,
hWnd,
D3DCREATE_SOFTWARE_VERTEXPROCESSING,
&d3dpp,
&d3ddev);
init_graphics(); // call the function to initialize the triangle
d3ddev->SetRenderState(D3DRS_LIGHTING, FALSE); // turn off the 3D lighting
d3ddev->SetRenderState(D3DRS_CULLMODE, D3DCULL_NONE); // both sides of the triangles
d3ddev->SetRenderState(D3DRS_ZENABLE, TRUE); // turn on the z-buffer
}
