SMDS_MeshVolume* SMESH_MesherHelper::AddVolume(const SMDS_MeshNode* n1,
const SMDS_MeshNode* n2,
const SMDS_MeshNode* n3,
const SMDS_MeshNode* n4,
const int id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
SMDS_MeshVolume* elem = 0;
if(!myCreateQuadratic) {
if(id)
elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, id);
else
elem = meshDS->AddVolume(n1, n2, n3, n4);
}
else {
const SMDS_MeshNode* n12 = GetMediumNode(n1,n2,force3d);
const SMDS_MeshNode* n23 = GetMediumNode(n2,n3,force3d);
const SMDS_MeshNode* n31 = GetMediumNode(n3,n1,force3d);
const SMDS_MeshNode* n14 = GetMediumNode(n1,n4,force3d);
const SMDS_MeshNode* n24 = GetMediumNode(n2,n4,force3d);
const SMDS_MeshNode* n34 = GetMediumNode(n3,n4,force3d);
if(id)
elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, n12, n23, n31, n14, n24, n34, id);
else
elem = meshDS->AddVolume(n1, n2, n3, n4, n12, n23, n31, n14, n24, n34);
}
if ( mySetElemOnShape && myShapeID > 0 )
meshDS->SetMeshElementOnShape( elem, myShapeID );
return elem;
}
SMDS_MeshEdge* SMESH_MesherHelper::AddEdge(const SMDS_MeshNode* n1,
const SMDS_MeshNode* n2,
const int id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
SMDS_MeshEdge* edge = 0;
if (myCreateQuadratic) {
const SMDS_MeshNode* n12 = GetMediumNode(n1,n2,force3d);
if(id)
edge = meshDS->AddEdgeWithID(n1, n2, n12, id);
else
edge = meshDS->AddEdge(n1, n2, n12);
}
else {
if(id)
edge = meshDS->AddEdgeWithID(n1, n2, id);
else
edge = meshDS->AddEdge(n1, n2);
}
if ( mySetElemOnShape && myShapeID > 0 )
meshDS->SetMeshElementOnShape( edge, myShapeID );
return edge;
}
SMDS_MeshVolume* SMESH_MesherHelper::AddVolume(const SMDS_MeshNode* n1,
const SMDS_MeshNode* n2,
const SMDS_MeshNode* n3,
const SMDS_MeshNode* n4,
const SMDS_MeshNode* n5,
const SMDS_MeshNode* n6,
const SMDS_MeshNode* n7,
const SMDS_MeshNode* n8,
const int id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
SMDS_MeshVolume* elem = 0;
if(!myCreateQuadratic) {
if(id)
elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, n5, n6, n7, n8, id);
else
elem = meshDS->AddVolume(n1, n2, n3, n4, n5, n6, n7, n8);
}
else {
const SMDS_MeshNode* n12 = GetMediumNode(n1,n2,force3d);
const SMDS_MeshNode* n23 = GetMediumNode(n2,n3,force3d);
const SMDS_MeshNode* n34 = GetMediumNode(n3,n4,force3d);
const SMDS_MeshNode* n41 = GetMediumNode(n4,n1,force3d);
const SMDS_MeshNode* n56 = GetMediumNode(n5,n6,force3d);
const SMDS_MeshNode* n67 = GetMediumNode(n6,n7,force3d);
const SMDS_MeshNode* n78 = GetMediumNode(n7,n8,force3d);
const SMDS_MeshNode* n85 = GetMediumNode(n8,n5,force3d);
const SMDS_MeshNode* n15 = GetMediumNode(n1,n5,force3d);
const SMDS_MeshNode* n26 = GetMediumNode(n2,n6,force3d);
const SMDS_MeshNode* n37 = GetMediumNode(n3,n7,force3d);
const SMDS_MeshNode* n48 = GetMediumNode(n4,n8,force3d);
if(id)
elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, n5, n6, n7, n8,
n12, n23, n34, n41, n56, n67,
n78, n85, n15, n26, n37, n48, id);
else
elem = meshDS->AddVolume(n1, n2, n3, n4, n5, n6, n7, n8,
n12, n23, n34, n41, n56, n67,
n78, n85, n15, n26, n37, n48);
}
if ( mySetElemOnShape && myShapeID > 0 )
meshDS->SetMeshElementOnShape( elem, myShapeID );
return elem;
}
//=============================================================================
bool NETGENPlugin_Mesher::Compute()
{
#ifdef WNT
netgen::MeshingParameters& mparams = netgen::GlobalMeshingParameters();
#else
netgen::MeshingParameters& mparams = netgen::mparam;
#endif
MESSAGE("Compute with:\n"
" max size = " << mparams.maxh << "\n"
" segments per edge = " << mparams.segmentsperedge);
MESSAGE("\n"
" growth rate = " << mparams.grading << "\n"
" elements per radius = " << mparams.curvaturesafety << "\n"
" second order = " << mparams.secondorder << "\n"
" quad allowed = " << mparams.quad);
SMESH_ComputeErrorPtr error = SMESH_ComputeError::New();
nglib::Ng_Init();
// -------------------------
// Prepare OCC geometry
// -------------------------
netgen::OCCGeometry occgeo;
list< SMESH_subMesh* > meshedSM;
PrepareOCCgeometry( occgeo, _shape, *_mesh, &meshedSM );
// -------------------------
// Generate the mesh
// -------------------------
netgen::Mesh *ngMesh = NULL;
SMESH_Comment comment;
int err = 0;
int nbInitNod = 0;
int nbInitSeg = 0;
int nbInitFac = 0;
// vector of nodes in which node index == netgen ID
vector< SMDS_MeshNode* > nodeVec;
try
{
// ----------------
// compute 1D mesh
// ----------------
// pass 1D simple parameters to NETGEN
if ( _simpleHyp ) {
if ( int nbSeg = _simpleHyp->GetNumberOfSegments() ) {
// nb of segments
mparams.segmentsperedge = nbSeg + 0.1;
mparams.maxh = occgeo.boundingbox.Diam();
mparams.grading = 0.01;
}
else {
// segment length
mparams.segmentsperedge = 1;
mparams.maxh = _simpleHyp->GetLocalLength();
}
}
// let netgen create ngMesh and calculate element size on not meshed shapes
char *optstr = 0;
int startWith = netgen::MESHCONST_ANALYSE;
int endWith = netgen::MESHCONST_ANALYSE;
err = netgen::OCCGenerateMesh(occgeo, ngMesh, startWith, endWith, optstr);
if (err) comment << "Error in netgen::OCCGenerateMesh() at MESHCONST_ANALYSE step";
// fill ngMesh with nodes and elements of computed submeshes
err = ! fillNgMesh(occgeo, *ngMesh, nodeVec, meshedSM);
nbInitNod = ngMesh->GetNP();
nbInitSeg = ngMesh->GetNSeg();
nbInitFac = ngMesh->GetNSE();
// compute mesh
if (!err)
{
startWith = endWith = netgen::MESHCONST_MESHEDGES;
err = netgen::OCCGenerateMesh(occgeo, ngMesh, startWith, endWith, optstr);
if (err) comment << "Error in netgen::OCCGenerateMesh() at 1D mesh generation";
}
// ---------------------
// compute surface mesh
// ---------------------
if (!err)
{
// pass 2D simple parameters to NETGEN
if ( _simpleHyp ) {
if ( double area = _simpleHyp->GetMaxElementArea() ) {
// face area
mparams.maxh = sqrt(2. * area/sqrt(3.0));
mparams.grading = 0.4; // moderate size growth
}
else {
// length from edges
double length = 0;
TopTools_MapOfShape tmpMap;
for ( TopExp_Explorer exp( _shape, TopAbs_EDGE ); exp.More(); exp.Next() )
if( tmpMap.Add(exp.Current()) )
length += SMESH_Algo::EdgeLength( TopoDS::Edge( exp.Current() ));
if ( ngMesh->GetNSeg() ) {
// we have to multiply length by 2 since for each TopoDS_Edge there
// are double set of NETGEN edges or, in other words, we have to
// divide ngMesh->GetNSeg() on 2.
mparams.maxh = 2*length / ngMesh->GetNSeg();
}
else
mparams.maxh = 1000;
mparams.grading = 0.2; // slow size growth
}
mparams.maxh = min( mparams.maxh, occgeo.boundingbox.Diam()/2 );
ngMesh->SetGlobalH (mparams.maxh);
netgen::Box<3> bb = occgeo.GetBoundingBox();
bb.Increase (bb.Diam()/20);
ngMesh->SetLocalH (bb.PMin(), bb.PMax(), mparams.grading);
}
// let netgen compute 2D mesh
startWith = netgen::MESHCONST_MESHSURFACE;
endWith = _optimize ? netgen::MESHCONST_OPTSURFACE : netgen::MESHCONST_MESHSURFACE;
err = netgen::OCCGenerateMesh(occgeo, ngMesh, startWith, endWith, optstr);
if (err) comment << "Error in netgen::OCCGenerateMesh() at surface mesh generation";
}
// ---------------------
// generate volume mesh
// ---------------------
if (!err && _isVolume)
{
// add ng face descriptors of meshed faces
std::map< int, std::pair<int,int> >::iterator fId_soIds = _faceDescriptors.begin();
for ( ; fId_soIds != _faceDescriptors.end(); ++fId_soIds ) {
int faceID = fId_soIds->first;
int solidID1 = fId_soIds->second.first;
int solidID2 = fId_soIds->second.second;
ngMesh->AddFaceDescriptor (netgen::FaceDescriptor(faceID, solidID1, solidID2, 0));
}
// pass 3D simple parameters to NETGEN
const NETGENPlugin_SimpleHypothesis_3D* simple3d =
dynamic_cast< const NETGENPlugin_SimpleHypothesis_3D* > ( _simpleHyp );
if ( simple3d ) {
if ( double vol = simple3d->GetMaxElementVolume() ) {
// max volume
mparams.maxh = pow( 72, 1/6. ) * pow( vol, 1/3. );
mparams.maxh = min( mparams.maxh, occgeo.boundingbox.Diam()/2 );
}
else {
// length from faces
mparams.maxh = ngMesh->AverageH();
}
// netgen::ARRAY<double> maxhdom;
// maxhdom.SetSize (occgeo.NrSolids());
// maxhdom = mparams.maxh;
// ngMesh->SetMaxHDomain (maxhdom);
ngMesh->SetGlobalH (mparams.maxh);
mparams.grading = 0.4;
ngMesh->CalcLocalH();
}
// let netgen compute 3D mesh
startWith = netgen::MESHCONST_MESHVOLUME;
endWith = _optimize ? netgen::MESHCONST_OPTVOLUME : netgen::MESHCONST_MESHVOLUME;
err = netgen::OCCGenerateMesh(occgeo, ngMesh, startWith, endWith, optstr);
if (err) comment << "Error in netgen::OCCGenerateMesh()";
}
if (!err && mparams.secondorder > 0)
{
netgen::OCCRefinementSurfaces ref (occgeo);
ref.MakeSecondOrder (*ngMesh);
}
}
catch (netgen::NgException exc)
{
error->myName = err = COMPERR_ALGO_FAILED;
comment << exc.What();
}
int nbNod = ngMesh->GetNP();
int nbSeg = ngMesh->GetNSeg();
int nbFac = ngMesh->GetNSE();
int nbVol = ngMesh->GetNE();
MESSAGE((err ? "Mesh Generation failure" : "End of Mesh Generation") <<
", nb nodes: " << nbNod <<
", nb segments: " << nbSeg <<
", nb faces: " << nbFac <<
", nb volumes: " << nbVol);
// -----------------------------------------------------------
// Feed back the SMESHDS with the generated Nodes and Elements
// -----------------------------------------------------------
SMESHDS_Mesh* meshDS = _mesh->GetMeshDS();
bool isOK = ( !err && (_isVolume ? (nbVol > 0) : (nbFac > 0)) );
if ( true /*isOK*/ ) // get whatever built
{
// map of nodes assigned to submeshes
NCollection_Map<int> pindMap;
// create and insert nodes into nodeVec
nodeVec.resize( nbNod + 1 );
int i;
for (i = nbInitNod+1; i <= nbNod /*&& isOK*/; ++i )
{
const netgen::MeshPoint& ngPoint = ngMesh->Point(i);
SMDS_MeshNode* node = NULL;
bool newNodeOnVertex = false;
TopoDS_Vertex aVert;
if (i-nbInitNod <= occgeo.vmap.Extent())
{
// point on vertex
aVert = TopoDS::Vertex(occgeo.vmap(i-nbInitNod));
SMESHDS_SubMesh * submesh = meshDS->MeshElements(aVert);
if (submesh)
{
SMDS_NodeIteratorPtr it = submesh->GetNodes();
if (it->more())
{
node = const_cast<SMDS_MeshNode*> (it->next());
pindMap.Add(i);
}
}
if (!node)
newNodeOnVertex = true;
}
if (!node)
node = meshDS->AddNode(ngPoint.X(), ngPoint.Y(), ngPoint.Z());
if (!node)
{
MESSAGE("Cannot create a mesh node");
if ( !comment.size() ) comment << "Cannot create a mesh node";
nbSeg = nbFac = nbVol = isOK = 0;
break;
}
nodeVec.at(i) = node;
if (newNodeOnVertex)
{
// point on vertex
meshDS->SetNodeOnVertex(node, aVert);
pindMap.Add(i);
}
}
// create mesh segments along geometric edges
NCollection_Map<Link> linkMap;
for (i = nbInitSeg+1; i <= nbSeg/* && isOK*/; ++i )
{
const netgen::Segment& seg = ngMesh->LineSegment(i);
Link link(seg.p1, seg.p2);
if (linkMap.Contains(link))
continue;
linkMap.Add(link);
TopoDS_Edge aEdge;
int pinds[3] = { seg.p1, seg.p2, seg.pmid };
int nbp = 0;
double param2 = 0;
for (int j=0; j < 3; ++j)
{
int pind = pinds[j];
if (pind <= 0) continue;
++nbp;
double param;
if (j < 2)
{
if (aEdge.IsNull())
{
int aGeomEdgeInd = seg.epgeominfo[j].edgenr;
if (aGeomEdgeInd > 0 && aGeomEdgeInd <= occgeo.emap.Extent())
aEdge = TopoDS::Edge(occgeo.emap(aGeomEdgeInd));
}
param = seg.epgeominfo[j].dist;
param2 += param;
}
else
param = param2 * 0.5;
if (pind <= nbInitNod || pindMap.Contains(pind))
continue;
if (!aEdge.IsNull())
{
meshDS->SetNodeOnEdge(nodeVec.at(pind), aEdge, param);
pindMap.Add(pind);
}
}
SMDS_MeshEdge* edge;
if (nbp < 3) // second order ?
edge = meshDS->AddEdge(nodeVec.at(pinds[0]), nodeVec.at(pinds[1]));
else
edge = meshDS->AddEdge(nodeVec.at(pinds[0]), nodeVec.at(pinds[1]),
nodeVec.at(pinds[2]));
if (!edge)
{
if ( !comment.size() ) comment << "Cannot create a mesh edge";
MESSAGE("Cannot create a mesh edge");
nbSeg = nbFac = nbVol = isOK = 0;
break;
}
if (!aEdge.IsNull())
meshDS->SetMeshElementOnShape(edge, aEdge);
}
// create mesh faces along geometric faces
for (i = nbInitFac+1; i <= nbFac/* && isOK*/; ++i )
{
const netgen::Element2d& elem = ngMesh->SurfaceElement(i);
int aGeomFaceInd = elem.GetIndex();
TopoDS_Face aFace;
if (aGeomFaceInd > 0 && aGeomFaceInd <= occgeo.fmap.Extent())
aFace = TopoDS::Face(occgeo.fmap(aGeomFaceInd));
vector<SMDS_MeshNode*> nodes;
for (int j=1; j <= elem.GetNP(); ++j)
{
int pind = elem.PNum(j);
SMDS_MeshNode* node = nodeVec.at(pind);
nodes.push_back(node);
if (pind <= nbInitNod || pindMap.Contains(pind))
continue;
if (!aFace.IsNull())
{
const netgen::PointGeomInfo& pgi = elem.GeomInfoPi(j);
meshDS->SetNodeOnFace(node, aFace, pgi.u, pgi.v);
pindMap.Add(pind);
}
}
SMDS_MeshFace* face = NULL;
switch (elem.GetType())
{
case netgen::TRIG:
face = meshDS->AddFace(nodes[0],nodes[1],nodes[2]);
break;
case netgen::QUAD:
face = meshDS->AddFace(nodes[0],nodes[1],nodes[2],nodes[3]);
break;
case netgen::TRIG6:
face = meshDS->AddFace(nodes[0],nodes[1],nodes[2],nodes[5],nodes[3],nodes[4]);
break;
case netgen::QUAD8:
face = meshDS->AddFace(nodes[0],nodes[1],nodes[2],nodes[3],
nodes[4],nodes[7],nodes[5],nodes[6]);
break;
default:
MESSAGE("NETGEN created a face of unexpected type, ignoring");
continue;
}
if (!face)
{
if ( !comment.size() ) comment << "Cannot create a mesh face";
MESSAGE("Cannot create a mesh face");
nbSeg = nbFac = nbVol = isOK = 0;
break;
}
if (!aFace.IsNull())
meshDS->SetMeshElementOnShape(face, aFace);
}
// create tetrahedra
for (i = 1; i <= nbVol/* && isOK*/; ++i)
{
const netgen::Element& elem = ngMesh->VolumeElement(i);
int aSolidInd = elem.GetIndex();
TopoDS_Solid aSolid;
if (aSolidInd > 0 && aSolidInd <= occgeo.somap.Extent())
aSolid = TopoDS::Solid(occgeo.somap(aSolidInd));
vector<SMDS_MeshNode*> nodes;
for (int j=1; j <= elem.GetNP(); ++j)
{
int pind = elem.PNum(j);
SMDS_MeshNode* node = nodeVec.at(pind);
nodes.push_back(node);
if (pind <= nbInitNod || pindMap.Contains(pind))
continue;
if (!aSolid.IsNull())
{
// point in solid
meshDS->SetNodeInVolume(node, aSolid);
pindMap.Add(pind);
}
}
SMDS_MeshVolume* vol = NULL;
switch (elem.GetType())
{
case netgen::TET:
vol = meshDS->AddVolume(nodes[0],nodes[1],nodes[2],nodes[3]);
break;
case netgen::TET10:
vol = meshDS->AddVolume(nodes[0],nodes[1],nodes[2],nodes[3],
nodes[4],nodes[7],nodes[5],nodes[6],nodes[8],nodes[9]);
break;
default:
MESSAGE("NETGEN created a volume of unexpected type, ignoring");
continue;
}
if (!vol)
{
if ( !comment.size() ) comment << "Cannot create a mesh volume";
MESSAGE("Cannot create a mesh volume");
nbSeg = nbFac = nbVol = isOK = 0;
break;
}
if (!aSolid.IsNull())
meshDS->SetMeshElementOnShape(vol, aSolid);
}
}
if ( error->IsOK() && ( !isOK || comment.size() > 0 ))
error->myName = COMPERR_ALGO_FAILED;
if ( !comment.empty() )
error->myComment = comment;
// set bad compute error to subshapes of all failed subshapes shapes
if ( !error->IsOK() && err )
{
for (int i = 1; i <= occgeo.fmap.Extent(); i++) {
int status = occgeo.facemeshstatus[i-1];
if (status == 1 ) continue;
if ( SMESH_subMesh* sm = _mesh->GetSubMeshContaining( occgeo.fmap( i ))) {
SMESH_ComputeErrorPtr& smError = sm->GetComputeError();
if ( !smError || smError->IsOK() ) {
if ( status == -1 )
smError.reset( new SMESH_ComputeError( error->myName, error->myComment ));
else
smError.reset( new SMESH_ComputeError( COMPERR_ALGO_FAILED, "Ignored" ));
}
}
}
}
nglib::Ng_DeleteMesh((nglib::Ng_Mesh*)ngMesh);
nglib::Ng_Exit();
RemoveTmpFiles();
return error->IsOK();
}
bool NETGENPlugin_NETGEN_3D::Compute(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape)
{
MESSAGE("NETGENPlugin_NETGEN_3D::Compute with maxElmentsize = " << _maxElementVolume);
SMESHDS_Mesh* meshDS = aMesh.GetMeshDS();
const int invalid_ID = -1;
SMESH::Controls::Area areaControl;
SMESH::Controls::TSequenceOfXYZ nodesCoords;
// -------------------------------------------------------------------
// get triangles on aShell and make a map of nodes to Netgen node IDs
// -------------------------------------------------------------------
SMESH_MesherHelper helper(aMesh);
SMESH_MesherHelper* myTool = &helper;
bool _quadraticMesh = myTool->IsQuadraticSubMesh(aShape);
typedef map< const SMDS_MeshNode*, int, TIDCompare > TNodeToIDMap;
TNodeToIDMap nodeToNetgenID;
list< const SMDS_MeshElement* > triangles;
list< bool > isReversed; // orientation of triangles
TopAbs_ShapeEnum mainType = aMesh.GetShapeToMesh().ShapeType();
bool checkReverse = ( mainType == TopAbs_COMPOUND || mainType == TopAbs_COMPSOLID );
// for the degeneraged edge: ignore all but one node on it;
// map storing ids of degen edges and vertices and their netgen id:
map< int, int* > degenShapeIdToPtrNgId;
map< int, int* >::iterator shId_ngId;
list< int > degenNgIds;
StdMeshers_QuadToTriaAdaptor Adaptor;
Adaptor.Compute(aMesh,aShape);
for (TopExp_Explorer exp(aShape,TopAbs_FACE); exp.More(); exp.Next())
{
const TopoDS_Shape& aShapeFace = exp.Current();
const SMESHDS_SubMesh * aSubMeshDSFace = meshDS->MeshElements( aShapeFace );
if ( aSubMeshDSFace )
{
bool isRev = false;
if ( checkReverse && helper.NbAncestors(aShapeFace, aMesh, aShape.ShapeType()) > 1 )
// IsReversedSubMesh() can work wrong on strongly curved faces,
// so we use it as less as possible
isRev = SMESH_Algo::IsReversedSubMesh( TopoDS::Face(aShapeFace), meshDS );
SMDS_ElemIteratorPtr iteratorElem = aSubMeshDSFace->GetElements();
while ( iteratorElem->more() ) // loop on elements on a face
{
// check element
const SMDS_MeshElement* elem = iteratorElem->next();
if ( !elem )
return error( COMPERR_BAD_INPUT_MESH, "Null element encounters");
bool isTraingle = ( elem->NbNodes()==3 || (_quadraticMesh && elem->NbNodes()==6 ));
if ( !isTraingle ) {
//return error( COMPERR_BAD_INPUT_MESH,
// SMESH_Comment("Not triangle element ")<<elem->GetID());
// using adaptor
const list<const SMDS_FaceOfNodes*>* faces = Adaptor.GetTriangles(elem);
if(faces==0) {
return error( COMPERR_BAD_INPUT_MESH,
SMESH_Comment("Not triangles in adaptor for element ")<<elem->GetID());
}
list<const SMDS_FaceOfNodes*>::const_iterator itf = faces->begin();
for(; itf!=faces->end(); itf++ ) {
triangles.push_back( (*itf) );
isReversed.push_back( isRev );
// put triange's nodes to nodeToNetgenID map
SMDS_ElemIteratorPtr triangleNodesIt = (*itf)->nodesIterator();
while ( triangleNodesIt->more() ) {
const SMDS_MeshNode * node =
static_cast<const SMDS_MeshNode *>(triangleNodesIt->next());
if(myTool->IsMedium(node))
continue;
nodeToNetgenID.insert( make_pair( node, invalid_ID ));
}
}
}
else {
// keep a triangle
triangles.push_back( elem );
isReversed.push_back( isRev );
// put elem nodes to nodeToNetgenID map
SMDS_ElemIteratorPtr triangleNodesIt = elem->nodesIterator();
while ( triangleNodesIt->more() ) {
const SMDS_MeshNode * node =
static_cast<const SMDS_MeshNode *>(triangleNodesIt->next());
if(myTool->IsMedium(node))
continue;
nodeToNetgenID.insert( make_pair( node, invalid_ID ));
}
}
#ifdef _DEBUG_
// check if a trainge is degenerated
areaControl.GetPoints( elem, nodesCoords );
double area = areaControl.GetValue( nodesCoords );
if ( area <= DBL_MIN ) {
MESSAGE( "Warning: Degenerated " << elem );
}
#endif
}
// look for degeneraged edges and vetices
for (TopExp_Explorer expE(aShapeFace,TopAbs_EDGE); expE.More(); expE.Next())
{
TopoDS_Edge aShapeEdge = TopoDS::Edge( expE.Current() );
if ( BRep_Tool::Degenerated( aShapeEdge ))
{
degenNgIds.push_back( invalid_ID );
int* ptrIdOnEdge = & degenNgIds.back();
// remember edge id
int edgeID = meshDS->ShapeToIndex( aShapeEdge );
degenShapeIdToPtrNgId.insert( make_pair( edgeID, ptrIdOnEdge ));
// remember vertex id
int vertexID = meshDS->ShapeToIndex( TopExp::FirstVertex( aShapeEdge ));
degenShapeIdToPtrNgId.insert( make_pair( vertexID, ptrIdOnEdge ));
}
}
}
}
// ---------------------------------
// Feed the Netgen with surface mesh
// ---------------------------------
int Netgen_NbOfNodes = 0;
int Netgen_param2ndOrder = 0;
double Netgen_paramFine = 1.;
double Netgen_paramSize = pow( 72, 1/6. ) * pow( _maxElementVolume, 1/3. );
double Netgen_point[3];
int Netgen_triangle[3];
int Netgen_tetrahedron[4];
Ng_Init();
Ng_Mesh * Netgen_mesh = Ng_NewMesh();
// set nodes and remember thier netgen IDs
bool isDegen = false, hasDegen = !degenShapeIdToPtrNgId.empty();
TNodeToIDMap::iterator n_id = nodeToNetgenID.begin();
for ( ; n_id != nodeToNetgenID.end(); ++n_id )
{
const SMDS_MeshNode* node = n_id->first;
// ignore nodes on degenerated edge
if ( hasDegen ) {
int shapeId = node->GetPosition()->GetShapeId();
shId_ngId = degenShapeIdToPtrNgId.find( shapeId );
isDegen = ( shId_ngId != degenShapeIdToPtrNgId.end() );
if ( isDegen && *(shId_ngId->second) != invalid_ID ) {
n_id->second = *(shId_ngId->second);
continue;
}
}
Netgen_point [ 0 ] = node->X();
Netgen_point [ 1 ] = node->Y();
Netgen_point [ 2 ] = node->Z();
Ng_AddPoint(Netgen_mesh, Netgen_point);
n_id->second = ++Netgen_NbOfNodes; // set netgen ID
if ( isDegen ) // all nodes on a degen edge get one netgen ID
*(shId_ngId->second) = n_id->second;
}
// set triangles
list< const SMDS_MeshElement* >::iterator tria = triangles.begin();
list< bool >::iterator reverse = isReversed.begin();
for ( ; tria != triangles.end(); ++tria, ++reverse )
{
int i = 0;
SMDS_ElemIteratorPtr triangleNodesIt = (*tria)->nodesIterator();
while ( triangleNodesIt->more() ) {
const SMDS_MeshNode * node =
static_cast<const SMDS_MeshNode *>(triangleNodesIt->next());
if(myTool->IsMedium(node))
continue;
Netgen_triangle[ *reverse ? 2 - i : i ] = nodeToNetgenID[ node ];
++i;
}
if ( !hasDegen ||
// ignore degenerated triangles, they have 2 or 3 same ids
(Netgen_triangle[0] != Netgen_triangle[1] &&
Netgen_triangle[0] != Netgen_triangle[2] &&
Netgen_triangle[2] != Netgen_triangle[1] ))
{
Ng_AddSurfaceElement(Netgen_mesh, NG_TRIG, Netgen_triangle);
}
}
// -------------------------
// Generate the volume mesh
// -------------------------
Ng_Meshing_Parameters Netgen_param;
Netgen_param.secondorder = Netgen_param2ndOrder;
Netgen_param.fineness = Netgen_paramFine;
Netgen_param.maxh = Netgen_paramSize;
Ng_Result status;
try {
#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
OCC_CATCH_SIGNALS;
#endif
status = Ng_GenerateVolumeMesh(Netgen_mesh, &Netgen_param);
}
catch (Standard_Failure& exc) {
error(COMPERR_OCC_EXCEPTION, exc.GetMessageString());
status = NG_VOLUME_FAILURE;
}
catch (...) {
error("Exception in Ng_GenerateVolumeMesh()");
status = NG_VOLUME_FAILURE;
}
if ( GetComputeError()->IsOK() ) {
switch ( status ) {
case NG_SURFACE_INPUT_ERROR:
error( status, "NG_SURFACE_INPUT_ERROR");
case NG_VOLUME_FAILURE:
error( status, "NG_VOLUME_FAILURE");
case NG_STL_INPUT_ERROR:
error( status, "NG_STL_INPUT_ERROR");
case NG_SURFACE_FAILURE:
error( status, "NG_SURFACE_FAILURE");
case NG_FILE_NOT_FOUND:
error( status, "NG_FILE_NOT_FOUND");
};
}
int Netgen_NbOfNodesNew = Ng_GetNP(Netgen_mesh);
int Netgen_NbOfTetra = Ng_GetNE(Netgen_mesh);
MESSAGE("End of Volume Mesh Generation. status=" << status <<
", nb new nodes: " << Netgen_NbOfNodesNew - Netgen_NbOfNodes <<
", nb tetra: " << Netgen_NbOfTetra);
// -------------------------------------------------------------------
// Feed back the SMESHDS with the generated Nodes and Volume Elements
// -------------------------------------------------------------------
bool isOK = ( /*status == NG_OK &&*/ Netgen_NbOfTetra > 0 );// get whatever built
if ( isOK )
{
// vector of nodes in which node index == netgen ID
vector< const SMDS_MeshNode* > nodeVec ( Netgen_NbOfNodesNew + 1 );
// insert old nodes into nodeVec
for ( n_id = nodeToNetgenID.begin(); n_id != nodeToNetgenID.end(); ++n_id ) {
nodeVec.at( n_id->second ) = n_id->first;
}
// create and insert new nodes into nodeVec
int nodeIndex = Netgen_NbOfNodes + 1;
int shapeID = meshDS->ShapeToIndex( aShape );
for ( ; nodeIndex <= Netgen_NbOfNodesNew; ++nodeIndex )
{
Ng_GetPoint( Netgen_mesh, nodeIndex, Netgen_point );
SMDS_MeshNode * node = meshDS->AddNode(Netgen_point[0],
Netgen_point[1],
Netgen_point[2]);
meshDS->SetNodeInVolume(node, shapeID);
nodeVec.at(nodeIndex) = node;
}
// create tetrahedrons
for ( int elemIndex = 1; elemIndex <= Netgen_NbOfTetra; ++elemIndex )
{
Ng_GetVolumeElement(Netgen_mesh, elemIndex, Netgen_tetrahedron);
SMDS_MeshVolume * elt = myTool->AddVolume (nodeVec.at( Netgen_tetrahedron[0] ),
nodeVec.at( Netgen_tetrahedron[1] ),
nodeVec.at( Netgen_tetrahedron[2] ),
nodeVec.at( Netgen_tetrahedron[3] ));
meshDS->SetMeshElementOnShape(elt, shapeID );
}
}
Ng_DeleteMesh(Netgen_mesh);
Ng_Exit();
NETGENPlugin_Mesher::RemoveTmpFiles();
return (status == NG_OK);
}
bool StdMeshers_CompositeSegment_1D::Compute(SMESH_Mesh & aMesh,
const TopoDS_Shape & aShape)
{
TopoDS_Edge edge = TopoDS::Edge( aShape );
SMESHDS_Mesh * meshDS = aMesh.GetMeshDS();
// Get edges to be discretized as a whole
TopoDS_Face nullFace;
auto_ptr< StdMeshers_FaceSide > side( GetFaceSide(aMesh, edge, nullFace, true ));
//side->dump("IN COMPOSITE SEG");
if ( side->NbEdges() < 2 )
return StdMeshers_Regular_1D::Compute( aMesh, aShape );
// update segment lenght computed by StdMeshers_AutomaticLength
const list <const SMESHDS_Hypothesis * > & hyps = GetUsedHypothesis(aMesh, aShape);
if ( !hyps.empty() ) {
StdMeshers_AutomaticLength * autoLenHyp = const_cast<StdMeshers_AutomaticLength *>
(dynamic_cast <const StdMeshers_AutomaticLength * >(hyps.front()));
if ( autoLenHyp )
_value[ BEG_LENGTH_IND ]= autoLenHyp->GetLength( &aMesh, side->Length() );
}
// Compute node parameters
auto_ptr< BRepAdaptor_CompCurve > C3d ( side->GetCurve3d() );
double f = C3d->FirstParameter(), l = C3d->LastParameter();
list< double > params;
if ( !computeInternalParameters ( aMesh, *C3d, side->Length(), f, l, params, false ))
return false;
// Redistribute parameters near ends
TopoDS_Vertex VFirst = side->FirstVertex();
TopoDS_Vertex VLast = side->LastVertex();
redistributeNearVertices( aMesh, *C3d, side->Length(), params, VFirst, VLast );
params.push_front(f);
params.push_back(l);
int nbNodes = params.size();
// Create mesh
const SMDS_MeshNode * nFirst = SMESH_Algo::VertexNode( VFirst, meshDS );
const SMDS_MeshNode * nLast = SMESH_Algo::VertexNode( VLast, meshDS );
if (!nFirst)
return error(COMPERR_BAD_INPUT_MESH, TComm("No node on vertex ")
<<meshDS->ShapeToIndex(VFirst));
if (!nLast)
return error(COMPERR_BAD_INPUT_MESH, TComm("No node on vertex ")
<<meshDS->ShapeToIndex(VLast));
vector<const SMDS_MeshNode*> nodes( nbNodes, (const SMDS_MeshNode*)0 );
nodes.front() = nFirst;
nodes.back() = nLast;
// create internal nodes
list< double >::iterator parIt = params.begin();
double prevPar = *parIt;
Standard_Real u;
for ( int iN = 0; parIt != params.end(); ++iN, ++parIt)
{
if ( !nodes[ iN ] ) {
gp_Pnt p = C3d->Value( *parIt );
SMDS_MeshNode* n = meshDS->AddNode( p.X(), p.Y(), p.Z());
C3d->Edge( *parIt, edge, u );
meshDS->SetNodeOnEdge( n, edge, u );
// cout << "new NODE: par="<<*parIt<<" ePar="<<u<<" e="<<edge.TShape().operator->()
// << " " << n << endl;
nodes[ iN ] = n;
}
// create edges
if ( iN ) {
double mPar = ( prevPar + *parIt )/2;
if ( _quadraticMesh ) {
// create medium node
double segLen = GCPnts_AbscissaPoint::Length(*C3d, prevPar, *parIt);
GCPnts_AbscissaPoint ruler( *C3d, segLen/2., prevPar );
if ( ruler.IsDone() )
mPar = ruler.Parameter();
gp_Pnt p = C3d->Value( mPar );
SMDS_MeshNode* n = meshDS->AddNode( p.X(), p.Y(), p.Z());
//cout << "new NODE "<< n << endl;
meshDS->SetNodeOnEdge( n, edge, u );
SMDS_MeshEdge * seg = meshDS->AddEdge(nodes[ iN-1 ], nodes[ iN ], n);
meshDS->SetMeshElementOnShape(seg, edge);
}
else {
C3d->Edge( mPar, edge, u );
SMDS_MeshEdge * seg = meshDS->AddEdge(nodes[ iN-1 ], nodes[ iN ]);
meshDS->SetMeshElementOnShape(seg, edge);
}
}
prevPar = *parIt;
}
// remove nodes on internal vertices
for ( int iE = 1; iE < side->NbEdges(); ++iE )
{
TopoDS_Vertex V = side->FirstVertex( iE );
while ( const SMDS_MeshNode * n = SMESH_Algo::VertexNode( V, meshDS ))
meshDS->RemoveNode( n );
}
// Update submeshes state for all edges and internal vertices,
// make them look computed even if none edge or node is set on them
careOfSubMeshes( *side, _EventListener );
return true;
}
bool StdMeshers_Projection_3D::Compute(SMESH_Mesh& aMesh, const TopoDS_Shape& aShape)
{
if ( !_sourceHypo )
return false;
SMESH_Mesh * srcMesh = _sourceHypo->GetSourceMesh();
SMESH_Mesh * tgtMesh = & aMesh;
if ( !srcMesh )
srcMesh = tgtMesh;
SMESHDS_Mesh * srcMeshDS = srcMesh->GetMeshDS();
SMESHDS_Mesh * tgtMeshDS = tgtMesh->GetMeshDS();
// get shell from shape3D
TopoDS_Shell srcShell, tgtShell;
TopExp_Explorer exp( _sourceHypo->GetSource3DShape(), TopAbs_SHELL );
int nbShell;
for ( nbShell = 0; exp.More(); exp.Next(), ++nbShell )
srcShell = TopoDS::Shell( exp.Current() );
if ( nbShell != 1 )
return error(COMPERR_BAD_SHAPE,
SMESH_Comment("Source shape must have 1 shell but not ") << nbShell);
exp.Init( aShape, TopAbs_SHELL );
for ( nbShell = 0; exp.More(); exp.Next(), ++nbShell )
tgtShell = TopoDS::Shell( exp.Current() );
if ( nbShell != 1 )
return error(COMPERR_BAD_SHAPE,
SMESH_Comment("Target shape must have 1 shell but not ") << nbShell);
// Check that shapes are blocks
if ( TAssocTool::Count( tgtShell, TopAbs_FACE , 1 ) != 6 ||
TAssocTool::Count( tgtShell, TopAbs_EDGE , 1 ) != 12 ||
TAssocTool::Count( tgtShell, TopAbs_WIRE , 1 ) != 6 )
return error(COMPERR_BAD_SHAPE, "Target shape is not a block");
if ( TAssocTool::Count( srcShell, TopAbs_FACE , 1 ) != 6 ||
TAssocTool::Count( srcShell, TopAbs_EDGE , 1 ) != 12 ||
TAssocTool::Count( srcShell, TopAbs_WIRE , 1 ) != 6 )
return error(COMPERR_BAD_SHAPE, "Source shape is not a block");
// Assure that mesh on a source shape is computed
SMESH_subMesh* srcSubMesh = srcMesh->GetSubMesh( _sourceHypo->GetSource3DShape() );
//SMESH_subMesh* tgtSubMesh = tgtMesh->GetSubMesh( aShape );
if ( tgtMesh == srcMesh && !aShape.IsSame( _sourceHypo->GetSource3DShape() )) {
if ( !TAssocTool::MakeComputed( srcSubMesh ))
return error(COMPERR_BAD_INPUT_MESH,"Source mesh not computed");
}
else {
if ( !srcSubMesh->IsMeshComputed() )
return error(COMPERR_BAD_INPUT_MESH,"Source mesh not computed");
}
// Find 2 pairs of corresponding vertices
TopoDS_Vertex tgtV000, tgtV100, srcV000, srcV100;
TAssocTool::TShapeShapeMap shape2ShapeMap;
if ( _sourceHypo->HasVertexAssociation() )
{
tgtV000 = _sourceHypo->GetTargetVertex(1);
tgtV100 = _sourceHypo->GetTargetVertex(2);
srcV000 = _sourceHypo->GetSourceVertex(1);
srcV100 = _sourceHypo->GetSourceVertex(2);
}
else
{
if ( !TAssocTool::FindSubShapeAssociation( tgtShell, tgtMesh, srcShell, srcMesh,
shape2ShapeMap) )
return error(COMPERR_BAD_SHAPE,"Topology of source and target shapes seems different" );
exp.Init( tgtShell, TopAbs_EDGE );
TopExp::Vertices( TopoDS::Edge( exp.Current() ), tgtV000, tgtV100 );
if ( !shape2ShapeMap.IsBound( tgtV000 ) || !shape2ShapeMap.IsBound( tgtV100 ))
return error("Association of subshapes failed" );
srcV000 = TopoDS::Vertex( shape2ShapeMap( tgtV000 ));
srcV100 = TopoDS::Vertex( shape2ShapeMap( tgtV100 ));
if ( !TAssocTool::IsSubShape( srcV000, srcShell ) ||
!TAssocTool::IsSubShape( srcV100, srcShell ))
return error("Incorrect association of subshapes" );
}
// Load 2 SMESH_Block's with src and tgt shells
SMESH_Block srcBlock, tgtBlock;
TopTools_IndexedMapOfOrientedShape scrShapes, tgtShapes;
if ( !tgtBlock.LoadBlockShapes( tgtShell, tgtV000, tgtV100, tgtShapes ))
return error(COMPERR_BAD_SHAPE, "Can't detect block subshapes. Not a block?");
if ( !srcBlock.LoadBlockShapes( srcShell, srcV000, srcV100, scrShapes ))
return error(COMPERR_BAD_SHAPE, "Can't detect block subshapes. Not a block?");
// Find matching nodes of src and tgt shells
TNodeNodeMap src2tgtNodeMap;
for ( int fId = SMESH_Block::ID_FirstF; fId < SMESH_Block::ID_Shell; ++fId )
{
// Corresponding subshapes
TopoDS_Face srcFace = TopoDS::Face( scrShapes( fId ));
TopoDS_Face tgtFace = TopoDS::Face( tgtShapes( fId ));
if ( _sourceHypo->HasVertexAssociation() ) { // associate face subshapes
shape2ShapeMap.Clear();
vector< int > edgeIdVec;
SMESH_Block::GetFaceEdgesIDs( fId, edgeIdVec );
for ( int i = 0; i < edgeIdVec.size(); ++i ) {
int eID = edgeIdVec[ i ];
shape2ShapeMap.Bind( tgtShapes( eID ), scrShapes( eID ));
if ( i < 2 ) {
vector< int > vertexIdVec;
SMESH_Block::GetEdgeVertexIDs( eID, vertexIdVec );
shape2ShapeMap.Bind( tgtShapes( vertexIdVec[0] ), scrShapes( vertexIdVec[0] ));
shape2ShapeMap.Bind( tgtShapes( vertexIdVec[1] ), scrShapes( vertexIdVec[1] ));
}
}
}
// Find matching nodes of tgt and src faces
TNodeNodeMap faceMatchingNodes;
if ( ! TAssocTool::FindMatchingNodesOnFaces( srcFace, srcMesh, tgtFace, tgtMesh,
shape2ShapeMap, faceMatchingNodes ))
return error(COMPERR_BAD_INPUT_MESH,SMESH_Comment("Mesh on faces #")
<< srcMeshDS->ShapeToIndex( srcFace ) << " and "
<< tgtMeshDS->ShapeToIndex( tgtFace ) << " seems different" );
// put found matching nodes of 2 faces to the global map
src2tgtNodeMap.insert( faceMatchingNodes.begin(), faceMatchingNodes.end() );
}
// ------------------
// Make mesh
// ------------------
SMDS_VolumeTool volTool;
SMESH_MesherHelper helper( *tgtMesh );
helper.IsQuadraticSubMesh( aShape );
SMESHDS_SubMesh* srcSMDS = srcSubMesh->GetSubMeshDS();
SMDS_ElemIteratorPtr volIt = srcSMDS->GetElements();
while ( volIt->more() ) // loop on source volumes
{
const SMDS_MeshElement* srcVol = volIt->next();
if ( !srcVol || srcVol->GetType() != SMDSAbs_Volume )
continue;
int nbNodes = srcVol->NbNodes();
SMDS_VolumeTool::VolumeType volType = volTool.GetType( nbNodes );
if ( srcVol->IsQuadratic() )
nbNodes = volTool.NbCornerNodes( volType );
// Find or create a new tgt node for each node of a src volume
vector< const SMDS_MeshNode* > nodes( nbNodes );
for ( int i = 0; i < nbNodes; ++i )
{
const SMDS_MeshNode* srcNode = srcVol->GetNode( i );
const SMDS_MeshNode* tgtNode = 0;
TNodeNodeMap::iterator sN_tN = src2tgtNodeMap.find( srcNode );
if ( sN_tN != src2tgtNodeMap.end() ) // found
{
tgtNode = sN_tN->second;
}
else // Create a new tgt node
{
// compute normalized parameters of source node in srcBlock
gp_Pnt srcCoord = gpXYZ( srcNode );
gp_XYZ srcParam;
if ( !srcBlock.ComputeParameters( srcCoord, srcParam ))
return error(SMESH_Comment("Can't compute normalized parameters ")
<< "for source node " << srcNode->GetID());
// compute coordinates of target node by srcParam
gp_XYZ tgtXYZ;
if ( !tgtBlock.ShellPoint( srcParam, tgtXYZ ))
return error("Can't compute coordinates by normalized parameters");
// add node
SMDS_MeshNode* newNode = tgtMeshDS->AddNode( tgtXYZ.X(), tgtXYZ.Y(), tgtXYZ.Z() );
tgtMeshDS->SetNodeInVolume( newNode, helper.GetSubShapeID() );
tgtNode = newNode;
src2tgtNodeMap.insert( make_pair( srcNode, tgtNode ));
}
nodes[ i ] = tgtNode;
}
// Create a new volume
SMDS_MeshVolume * tgtVol = 0;
int id = 0, force3d = false;
switch ( volType ) {
case SMDS_VolumeTool::TETRA :
case SMDS_VolumeTool::QUAD_TETRA:
tgtVol = helper.AddVolume( nodes[0],
nodes[1],
nodes[2],
nodes[3], id, force3d); break;
case SMDS_VolumeTool::PYRAM :
case SMDS_VolumeTool::QUAD_PYRAM:
tgtVol = helper.AddVolume( nodes[0],
nodes[1],
nodes[2],
nodes[3],
nodes[4], id, force3d); break;
case SMDS_VolumeTool::PENTA :
case SMDS_VolumeTool::QUAD_PENTA:
tgtVol = helper.AddVolume( nodes[0],
nodes[1],
nodes[2],
nodes[3],
nodes[4],
nodes[5], id, force3d); break;
case SMDS_VolumeTool::HEXA :
case SMDS_VolumeTool::QUAD_HEXA :
tgtVol = helper.AddVolume( nodes[0],
nodes[1],
nodes[2],
nodes[3],
nodes[4],
nodes[5],
nodes[6],
nodes[7], id, force3d); break;
default: // polyhedron
const SMDS_PolyhedralVolumeOfNodes * poly =
dynamic_cast<const SMDS_PolyhedralVolumeOfNodes*>( srcVol );
if ( !poly )
RETURN_BAD_RESULT("Unexpected volume type");
tgtVol = tgtMeshDS->AddPolyhedralVolume( nodes, poly->GetQuanities() );
}
if ( tgtVol ) {
tgtMeshDS->SetMeshElementOnShape( tgtVol, helper.GetSubShapeID() );
}
} // loop on volumes of src shell
return true;
}
bool StdMeshers_RadialQuadrangle_1D2D::Compute(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape)
{
TopExp_Explorer exp;
SMESHDS_Mesh * meshDS = aMesh.GetMeshDS();
myHelper = new SMESH_MesherHelper( aMesh );
myHelper->IsQuadraticSubMesh( aShape );
// to delete helper at exit from Compute()
auto_ptr<SMESH_MesherHelper> helperDeleter( myHelper );
myLayerPositions.clear();
TopoDS_Edge CircEdge, LinEdge1, LinEdge2;
int nbe = analyseFace( aShape, CircEdge, LinEdge1, LinEdge2 );
if( nbe>3 || nbe < 1 || CircEdge.IsNull() )
return error(COMPERR_BAD_SHAPE);
gp_Pnt P0,P1;
// points for rotation
TColgp_SequenceOfPnt Points;
// angles for rotation
TColStd_SequenceOfReal Angles;
// Nodes1 and Nodes2 - nodes along radiuses
// CNodes - nodes on circle edge
vector< const SMDS_MeshNode* > Nodes1, Nodes2, CNodes;
SMDS_MeshNode * NC;
// parameters edge nodes on face
TColgp_SequenceOfPnt2d Pnts2d1;
gp_Pnt2d PC;
int faceID = meshDS->ShapeToIndex(aShape);
TopoDS_Face F = TopoDS::Face(aShape);
Handle(Geom_Surface) S = BRep_Tool::Surface(F);
if(nbe==1)
{
Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast( getCurve( CircEdge ));
bool ok = _gen->Compute( aMesh, CircEdge );
if( !ok ) return false;
map< double, const SMDS_MeshNode* > theNodes;
ok = GetSortedNodesOnEdge(aMesh.GetMeshDS(),CircEdge,true,theNodes);
if( !ok ) return false;
CNodes.clear();
map< double, const SMDS_MeshNode* >::iterator itn = theNodes.begin();
const SMDS_MeshNode* NF = (*itn).second;
CNodes.push_back( (*itn).second );
double fang = (*itn).first;
if ( itn != theNodes.end() ) {
itn++;
for(; itn != theNodes.end(); itn++ ) {
CNodes.push_back( (*itn).second );
double ang = (*itn).first - fang;
if( ang>M_PI ) ang = ang - 2*M_PI;
if( ang<-M_PI ) ang = ang + 2*M_PI;
Angles.Append( ang );
}
}
P1 = gp_Pnt( NF->X(), NF->Y(), NF->Z() );
P0 = aCirc->Location();
myLayerPositions.clear();
computeLayerPositions(P0,P1);
exp.Init( CircEdge, TopAbs_VERTEX );
TopoDS_Vertex V1 = TopoDS::Vertex( exp.Current() );
gp_Pnt2d p2dV = BRep_Tool::Parameters( V1, TopoDS::Face(aShape) );
NC = meshDS->AddNode(P0.X(), P0.Y(), P0.Z());
GeomAPI_ProjectPointOnSurf PPS(P0,S);
double U0,V0;
PPS.Parameters(1,U0,V0);
meshDS->SetNodeOnFace(NC, faceID, U0, V0);
PC = gp_Pnt2d(U0,V0);
gp_Vec aVec(P0,P1);
gp_Vec2d aVec2d(PC,p2dV);
Nodes1.resize( myLayerPositions.size()+1 );
Nodes2.resize( myLayerPositions.size()+1 );
int i = 0;
for(; i<myLayerPositions.size(); i++) {
gp_Pnt P( P0.X() + aVec.X()*myLayerPositions[i],
P0.Y() + aVec.Y()*myLayerPositions[i],
P0.Z() + aVec.Z()*myLayerPositions[i] );
Points.Append(P);
SMDS_MeshNode * node = meshDS->AddNode(P.X(), P.Y(), P.Z());
Nodes1[i] = node;
Nodes2[i] = node;
double U = PC.X() + aVec2d.X()*myLayerPositions[i];
double V = PC.Y() + aVec2d.Y()*myLayerPositions[i];
meshDS->SetNodeOnFace( node, faceID, U, V );
Pnts2d1.Append(gp_Pnt2d(U,V));
}
Nodes1[Nodes1.size()-1] = NF;
Nodes2[Nodes1.size()-1] = NF;
}
else if(nbe==2 && LinEdge1.Orientation() != TopAbs_INTERNAL )
{
// one curve must be a half of circle and other curve must be
// a segment of line
double fp, lp;
Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast( getCurve( CircEdge, &fp, &lp ));
if( fabs(fabs(lp-fp)-M_PI) > Precision::Confusion() ) {
// not half of circle
return error(COMPERR_BAD_SHAPE);
}
Handle(Geom_Line) aLine = Handle(Geom_Line)::DownCast( getCurve( LinEdge1 ));
if( aLine.IsNull() ) {
// other curve not line
return error(COMPERR_BAD_SHAPE);
}
bool linEdgeComputed = false;
if( SMESH_subMesh* sm1 = aMesh.GetSubMesh(LinEdge1) ) {
if( !sm1->IsEmpty() ) {
if( isEdgeCompitaballyMeshed( LinEdge1, aMesh.GetSubMesh(F) ))
linEdgeComputed = true;
else
return error("Invalid set of hypotheses");
}
}
bool ok = _gen->Compute( aMesh, CircEdge );
if( !ok ) return false;
map< double, const SMDS_MeshNode* > theNodes;
GetSortedNodesOnEdge(aMesh.GetMeshDS(),CircEdge,true,theNodes);
CNodes.clear();
map< double, const SMDS_MeshNode* >::iterator itn = theNodes.begin();
double fang = (*itn).first;
itn++;
for(; itn != theNodes.end(); itn++ ) {
CNodes.push_back( (*itn).second );
double ang = (*itn).first - fang;
if( ang>M_PI ) ang = ang - 2*M_PI;
if( ang<-M_PI ) ang = ang + 2*M_PI;
Angles.Append( ang );
}
const SMDS_MeshNode* NF = theNodes.begin()->second;
const SMDS_MeshNode* NL = theNodes.rbegin()->second;
CNodes.push_back( NF );
P1 = gp_Pnt( NF->X(), NF->Y(), NF->Z() );
gp_Pnt P2( NL->X(), NL->Y(), NL->Z() );
P0 = aCirc->Location();
myLayerPositions.clear();
computeLayerPositions(P0,P1);
if ( linEdgeComputed )
{
if (!GetSortedNodesOnEdge(aMesh.GetMeshDS(),LinEdge1,true,theNodes))
return error("Invalid mesh on a straight edge");
vector< const SMDS_MeshNode* > *pNodes1 = &Nodes1, *pNodes2 = &Nodes2;
bool nodesFromP0ToP1 = ( theNodes.rbegin()->second == NF );
if ( !nodesFromP0ToP1 ) std::swap( pNodes1, pNodes2 );
map< double, const SMDS_MeshNode* >::reverse_iterator ritn = theNodes.rbegin();
itn = theNodes.begin();
for ( int i = Nodes1.size()-1; i > -1; ++itn, ++ritn, --i )
{
(*pNodes1)[i] = ritn->second;
(*pNodes2)[i] = itn->second;
Points.Append( gpXYZ( Nodes1[i]));
Pnts2d1.Append( myHelper->GetNodeUV( F, Nodes1[i]));
}
NC = const_cast<SMDS_MeshNode*>( itn->second );
Points.Remove( Nodes1.size() );
}
else
{
gp_Vec aVec(P0,P1);
int edgeID = meshDS->ShapeToIndex(LinEdge1);
// check orientation
Handle(Geom_Curve) Crv = BRep_Tool::Curve(LinEdge1,fp,lp);
gp_Pnt Ptmp;
Crv->D0(fp,Ptmp);
bool ori = true;
if( P1.Distance(Ptmp) > Precision::Confusion() )
ori = false;
// get UV points for edge
gp_Pnt2d PF,PL;
BRep_Tool::UVPoints( LinEdge1, TopoDS::Face(aShape), PF, PL );
PC = gp_Pnt2d( (PF.X()+PL.X())/2, (PF.Y()+PL.Y())/2 );
gp_Vec2d V2d;
if(ori) V2d = gp_Vec2d(PC,PF);
else V2d = gp_Vec2d(PC,PL);
// add nodes on edge
double cp = (fp+lp)/2;
double dp2 = (lp-fp)/2;
NC = meshDS->AddNode(P0.X(), P0.Y(), P0.Z());
meshDS->SetNodeOnEdge(NC, edgeID, cp);
Nodes1.resize( myLayerPositions.size()+1 );
Nodes2.resize( myLayerPositions.size()+1 );
int i = 0;
for(; i<myLayerPositions.size(); i++) {
gp_Pnt P( P0.X() + aVec.X()*myLayerPositions[i],
P0.Y() + aVec.Y()*myLayerPositions[i],
P0.Z() + aVec.Z()*myLayerPositions[i] );
Points.Append(P);
SMDS_MeshNode * node = meshDS->AddNode(P.X(), P.Y(), P.Z());
Nodes1[i] = node;
double param;
if(ori)
param = fp + dp2*(1-myLayerPositions[i]);
else
param = cp + dp2*myLayerPositions[i];
meshDS->SetNodeOnEdge(node, edgeID, param);
P = gp_Pnt( P0.X() - aVec.X()*myLayerPositions[i],
P0.Y() - aVec.Y()*myLayerPositions[i],
P0.Z() - aVec.Z()*myLayerPositions[i] );
node = meshDS->AddNode(P.X(), P.Y(), P.Z());
Nodes2[i] = node;
if(!ori)
param = fp + dp2*(1-myLayerPositions[i]);
else
param = cp + dp2*myLayerPositions[i];
meshDS->SetNodeOnEdge(node, edgeID, param);
// parameters on face
gp_Pnt2d P2d( PC.X() + V2d.X()*myLayerPositions[i],
PC.Y() + V2d.Y()*myLayerPositions[i] );
Pnts2d1.Append(P2d);
}
Nodes1[ myLayerPositions.size() ] = NF;
Nodes2[ myLayerPositions.size() ] = NL;
// create 1D elements on edge
vector< const SMDS_MeshNode* > tmpNodes;
tmpNodes.resize(2*Nodes1.size()+1);
for(i=0; i<Nodes2.size(); i++)
tmpNodes[Nodes2.size()-i-1] = Nodes2[i];
tmpNodes[Nodes2.size()] = NC;
for(i=0; i<Nodes1.size(); i++)
tmpNodes[Nodes2.size()+1+i] = Nodes1[i];
for(i=1; i<tmpNodes.size(); i++) {
SMDS_MeshEdge* ME = myHelper->AddEdge( tmpNodes[i-1], tmpNodes[i] );
if(ME) meshDS->SetMeshElementOnShape(ME, edgeID);
}
markLinEdgeAsComputedByMe( LinEdge1, aMesh.GetSubMesh( F ));
}
}
else // nbe==3 or ( nbe==2 && linEdge is INTERNAL )
{
if (nbe==2 && LinEdge1.Orientation() == TopAbs_INTERNAL )
LinEdge2 = LinEdge1;
// one curve must be a part of circle and other curves must be
// segments of line
double fp, lp;
Handle(Geom_Circle) aCirc = Handle(Geom_Circle)::DownCast( getCurve( CircEdge ));
Handle(Geom_Line) aLine1 = Handle(Geom_Line)::DownCast( getCurve( LinEdge1 ));
Handle(Geom_Line) aLine2 = Handle(Geom_Line)::DownCast( getCurve( LinEdge2 ));
if( aLine1.IsNull() || aLine2.IsNull() ) {
// other curve not line
return error(COMPERR_BAD_SHAPE);
}
bool linEdge1Computed = false;
if ( SMESH_subMesh* sm1 = aMesh.GetSubMesh(LinEdge1))
if( !sm1->IsEmpty() ) {
if( isEdgeCompitaballyMeshed( LinEdge1, aMesh.GetSubMesh(F) ))
linEdge1Computed = true;
else
return error("Invalid set of hypotheses");
}
bool linEdge2Computed = false;
if ( SMESH_subMesh* sm2 = aMesh.GetSubMesh(LinEdge2))
if( !sm2->IsEmpty() ) {
if( isEdgeCompitaballyMeshed( LinEdge2, aMesh.GetSubMesh(F) ))
linEdge2Computed = true;
else
return error("Invalid set of hypotheses");
}
bool ok = _gen->Compute( aMesh, CircEdge );
if( !ok ) return false;
map< double, const SMDS_MeshNode* > theNodes;
GetSortedNodesOnEdge(aMesh.GetMeshDS(),CircEdge,true,theNodes);
const SMDS_MeshNode* NF = theNodes.begin()->second;
const SMDS_MeshNode* NL = theNodes.rbegin()->second;
CNodes.clear();
CNodes.push_back( NF );
map< double, const SMDS_MeshNode* >::iterator itn = theNodes.begin();
double fang = (*itn).first;
itn++;
for(; itn != theNodes.end(); itn++ ) {
CNodes.push_back( (*itn).second );
double ang = (*itn).first - fang;
if( ang>M_PI ) ang = ang - 2*M_PI;
if( ang<-M_PI ) ang = ang + 2*M_PI;
Angles.Append( ang );
}
P1 = gp_Pnt( NF->X(), NF->Y(), NF->Z() );
gp_Pnt P2( NL->X(), NL->Y(), NL->Z() );
P0 = aCirc->Location();
myLayerPositions.clear();
computeLayerPositions(P0,P1);
Nodes1.resize( myLayerPositions.size()+1 );
Nodes2.resize( myLayerPositions.size()+1 );
exp.Init( LinEdge1, TopAbs_VERTEX );
TopoDS_Vertex V1 = TopoDS::Vertex( exp.Current() );
exp.Next();
TopoDS_Vertex V2 = TopoDS::Vertex( exp.Current() );
gp_Pnt PE1 = BRep_Tool::Pnt(V1);
gp_Pnt PE2 = BRep_Tool::Pnt(V2);
if( ( P1.Distance(PE1) > Precision::Confusion() ) &&
( P1.Distance(PE2) > Precision::Confusion() ) )
{
std::swap( LinEdge1, LinEdge2 );
std::swap( linEdge1Computed, linEdge2Computed );
}
TopoDS_Vertex VC = V2;
if( ( P1.Distance(PE1) > Precision::Confusion() ) &&
( P2.Distance(PE1) > Precision::Confusion() ) )
VC = V1;
int vertID = meshDS->ShapeToIndex(VC);
// LinEdge1
if ( linEdge1Computed )
{
if (!GetSortedNodesOnEdge(aMesh.GetMeshDS(),LinEdge1,true,theNodes))
return error("Invalid mesh on a straight edge");
bool nodesFromP0ToP1 = ( theNodes.rbegin()->second == NF );
NC = const_cast<SMDS_MeshNode*>
( nodesFromP0ToP1 ? theNodes.begin()->second : theNodes.rbegin()->second );
int i = 0, ir = Nodes1.size()-1;
int * pi = nodesFromP0ToP1 ? &i : &ir;
itn = theNodes.begin();
if ( nodesFromP0ToP1 ) ++itn;
for ( ; i < Nodes1.size(); ++i, --ir, ++itn )
{
Nodes1[*pi] = itn->second;
}
for ( i = 0; i < Nodes1.size()-1; ++i )
{
Points.Append( gpXYZ( Nodes1[i]));
Pnts2d1.Append( myHelper->GetNodeUV( F, Nodes1[i]));
}
}
else
{
int edgeID = meshDS->ShapeToIndex(LinEdge1);
gp_Vec aVec(P0,P1);
// check orientation
Handle(Geom_Curve) Crv = BRep_Tool::Curve(LinEdge1,fp,lp);
gp_Pnt Ptmp = Crv->Value(fp);
bool ori = false;
if( P1.Distance(Ptmp) > Precision::Confusion() )
ori = true;
// get UV points for edge
gp_Pnt2d PF,PL;
BRep_Tool::UVPoints( LinEdge1, TopoDS::Face(aShape), PF, PL );
gp_Vec2d V2d;
if(ori) {
V2d = gp_Vec2d(PF,PL);
PC = PF;
}
else {
V2d = gp_Vec2d(PL,PF);
PC = PL;
}
NC = const_cast<SMDS_MeshNode*>( VertexNode( VC, meshDS ));
if ( !NC )
{
NC = meshDS->AddNode(P0.X(), P0.Y(), P0.Z());
meshDS->SetNodeOnVertex(NC, vertID);
}
double dp = lp-fp;
int i = 0;
for(; i<myLayerPositions.size(); i++) {
gp_Pnt P( P0.X() + aVec.X()*myLayerPositions[i],
P0.Y() + aVec.Y()*myLayerPositions[i],
P0.Z() + aVec.Z()*myLayerPositions[i] );
Points.Append(P);
SMDS_MeshNode * node = meshDS->AddNode(P.X(), P.Y(), P.Z());
Nodes1[i] = node;
double param;
if(!ori)
param = fp + dp*(1-myLayerPositions[i]);
else
param = fp + dp*myLayerPositions[i];
meshDS->SetNodeOnEdge(node, edgeID, param);
// parameters on face
gp_Pnt2d P2d( PC.X() + V2d.X()*myLayerPositions[i],
PC.Y() + V2d.Y()*myLayerPositions[i] );
Pnts2d1.Append(P2d);
}
Nodes1[ myLayerPositions.size() ] = NF;
// create 1D elements on edge
SMDS_MeshEdge* ME = myHelper->AddEdge( NC, Nodes1[0] );
if(ME) meshDS->SetMeshElementOnShape(ME, edgeID);
for(i=1; i<Nodes1.size(); i++) {
ME = myHelper->AddEdge( Nodes1[i-1], Nodes1[i] );
if(ME) meshDS->SetMeshElementOnShape(ME, edgeID);
}
if (nbe==2 && LinEdge1.Orientation() == TopAbs_INTERNAL )
Nodes2 = Nodes1;
}
markLinEdgeAsComputedByMe( LinEdge1, aMesh.GetSubMesh( F ));
// LinEdge2
if ( linEdge2Computed )
{
if (!GetSortedNodesOnEdge(aMesh.GetMeshDS(),LinEdge2,true,theNodes))
return error("Invalid mesh on a straight edge");
bool nodesFromP0ToP2 = ( theNodes.rbegin()->second == NL );
int i = 0, ir = Nodes1.size()-1;
int * pi = nodesFromP0ToP2 ? &i : &ir;
itn = theNodes.begin();
if ( nodesFromP0ToP2 ) ++itn;
for ( ; i < Nodes2.size(); ++i, --ir, ++itn )
Nodes2[*pi] = itn->second;
}
else
{
int edgeID = meshDS->ShapeToIndex(LinEdge2);
gp_Vec aVec = gp_Vec(P0,P2);
// check orientation
Handle(Geom_Curve) Crv = BRep_Tool::Curve(LinEdge2,fp,lp);
gp_Pnt Ptmp = Crv->Value(fp);
bool ori = false;
if( P2.Distance(Ptmp) > Precision::Confusion() )
ori = true;
// get UV points for edge
gp_Pnt2d PF,PL;
BRep_Tool::UVPoints( LinEdge2, TopoDS::Face(aShape), PF, PL );
gp_Vec2d V2d;
if(ori) {
V2d = gp_Vec2d(PF,PL);
PC = PF;
}
else {
V2d = gp_Vec2d(PL,PF);
PC = PL;
}
double dp = lp-fp;
for(int i=0; i<myLayerPositions.size(); i++) {
gp_Pnt P( P0.X() + aVec.X()*myLayerPositions[i],
P0.Y() + aVec.Y()*myLayerPositions[i],
P0.Z() + aVec.Z()*myLayerPositions[i] );
SMDS_MeshNode * node = meshDS->AddNode(P.X(), P.Y(), P.Z());
Nodes2[i] = node;
double param;
if(!ori)
param = fp + dp*(1-myLayerPositions[i]);
else
param = fp + dp*myLayerPositions[i];
meshDS->SetNodeOnEdge(node, edgeID, param);
// parameters on face
gp_Pnt2d P2d( PC.X() + V2d.X()*myLayerPositions[i],
PC.Y() + V2d.Y()*myLayerPositions[i] );
}
Nodes2[ myLayerPositions.size() ] = NL;
// create 1D elements on edge
SMDS_MeshEdge* ME = myHelper->AddEdge( NC, Nodes2[0] );
if(ME) meshDS->SetMeshElementOnShape(ME, edgeID);
for(int i=1; i<Nodes2.size(); i++) {
ME = myHelper->AddEdge( Nodes2[i-1], Nodes2[i] );
if(ME) meshDS->SetMeshElementOnShape(ME, edgeID);
}
}
markLinEdgeAsComputedByMe( LinEdge2, aMesh.GetSubMesh( F ));
}
// orientation
bool IsForward = ( CircEdge.Orientation()==TopAbs_FORWARD );
// create nodes and mesh elements on face
// find axis of rotation
gp_Pnt P2 = gp_Pnt( CNodes[1]->X(), CNodes[1]->Y(), CNodes[1]->Z() );
gp_Vec Vec1(P0,P1);
gp_Vec Vec2(P0,P2);
gp_Vec Axis = Vec1.Crossed(Vec2);
// create elements
int i = 1;
//cout<<"Angles.Length() = "<<Angles.Length()<<" Points.Length() = "<<Points.Length()<<endl;
//cout<<"Nodes1.size() = "<<Nodes1.size()<<" Pnts2d1.Length() = "<<Pnts2d1.Length()<<endl;
for(; i<Angles.Length(); i++) {
vector< const SMDS_MeshNode* > tmpNodes;
tmpNodes.reserve(Nodes1.size());
gp_Trsf aTrsf;
gp_Ax1 theAxis(P0,gp_Dir(Axis));
aTrsf.SetRotation( theAxis, Angles.Value(i) );
gp_Trsf2d aTrsf2d;
aTrsf2d.SetRotation( PC, Angles.Value(i) );
// create nodes
int j = 1;
for(; j<=Points.Length(); j++) {
double cx,cy,cz;
Points.Value(j).Coord( cx, cy, cz );
aTrsf.Transforms( cx, cy, cz );
SMDS_MeshNode* node = myHelper->AddNode( cx, cy, cz );
// find parameters on face
Pnts2d1.Value(j).Coord( cx, cy );
aTrsf2d.Transforms( cx, cy );
// set node on face
meshDS->SetNodeOnFace( node, faceID, cx, cy );
tmpNodes[j-1] = node;
}
// create faces
tmpNodes[Points.Length()] = CNodes[i];
// quad
for(j=0; j<Nodes1.size()-1; j++) {
SMDS_MeshFace* MF;
if(IsForward)
MF = myHelper->AddFace( tmpNodes[j], Nodes1[j],
Nodes1[j+1], tmpNodes[j+1] );
else
MF = myHelper->AddFace( tmpNodes[j], tmpNodes[j+1],
Nodes1[j+1], Nodes1[j] );
if(MF) meshDS->SetMeshElementOnShape(MF, faceID);
}
// tria
SMDS_MeshFace* MF;
if(IsForward)
MF = myHelper->AddFace( NC, Nodes1[0], tmpNodes[0] );
else
MF = myHelper->AddFace( NC, tmpNodes[0], Nodes1[0] );
if(MF) meshDS->SetMeshElementOnShape(MF, faceID);
for(j=0; j<Nodes1.size(); j++) {
Nodes1[j] = tmpNodes[j];
}
}
// create last faces
// quad
for(i=0; i<Nodes1.size()-1; i++) {
SMDS_MeshFace* MF;
if(IsForward)
MF = myHelper->AddFace( Nodes2[i], Nodes1[i],
Nodes1[i+1], Nodes2[i+1] );
else
MF = myHelper->AddFace( Nodes2[i], Nodes2[i+1],
Nodes1[i+1], Nodes1[i] );
if(MF) meshDS->SetMeshElementOnShape(MF, faceID);
}
// tria
SMDS_MeshFace* MF;
if(IsForward)
MF = myHelper->AddFace( NC, Nodes1[0], Nodes2[0] );
else
MF = myHelper->AddFace( NC, Nodes2[0], Nodes1[0] );
if(MF) meshDS->SetMeshElementOnShape(MF, faceID);
return true;
}
bool StdMeshers_Hexa_3D::Compute(SMESH_Mesh & aMesh,
const TopoDS_Shape & aShape)// throw(SALOME_Exception)
{
// PAL14921. Enable catching std::bad_alloc and Standard_OutOfMemory outside
//Unexpect aCatch(SalomeException);
MESSAGE("StdMeshers_Hexa_3D::Compute");
SMESHDS_Mesh * meshDS = aMesh.GetMeshDS();
// 0. - shape and face mesh verification
// 0.1 - shape must be a solid (or a shell) with 6 faces
vector < SMESH_subMesh * >meshFaces;
for (TopExp_Explorer exp(aShape, TopAbs_FACE); exp.More(); exp.Next()) {
SMESH_subMesh *aSubMesh = aMesh.GetSubMeshContaining(exp.Current());
ASSERT(aSubMesh);
meshFaces.push_back(aSubMesh);
}
if (meshFaces.size() != 6) {
//return error(COMPERR_BAD_SHAPE, TComm(meshFaces.size())<<" instead of 6 faces in a block");
static StdMeshers_CompositeHexa_3D compositeHexa(-10, 0, aMesh.GetGen());
if ( !compositeHexa.Compute( aMesh, aShape ))
return error( compositeHexa.GetComputeError() );
return true;
}
// 0.2 - is each face meshed with Quadrangle_2D? (so, with a wire of 4 edges)
// tool for working with quadratic elements
SMESH_MesherHelper aTool (aMesh);
_quadraticMesh = aTool.IsQuadraticSubMesh(aShape);
// cube structure
typedef struct cubeStruct
{
TopoDS_Vertex V000;
TopoDS_Vertex V001;
TopoDS_Vertex V010;
TopoDS_Vertex V011;
TopoDS_Vertex V100;
TopoDS_Vertex V101;
TopoDS_Vertex V110;
TopoDS_Vertex V111;
faceQuadStruct* quad_X0;
faceQuadStruct* quad_X1;
faceQuadStruct* quad_Y0;
faceQuadStruct* quad_Y1;
faceQuadStruct* quad_Z0;
faceQuadStruct* quad_Z1;
Point3DStruct* np; // normalised 3D coordinates
} CubeStruct;
CubeStruct aCube;
// bounding faces
FaceQuadStruct* aQuads[6];
for (int i = 0; i < 6; i++)
aQuads[i] = 0;
for (int i = 0; i < 6; i++)
{
TopoDS_Shape aFace = meshFaces[i]->GetSubShape();
SMESH_Algo *algo = _gen->GetAlgo(aMesh, aFace);
string algoName = algo->GetName();
bool isAllQuad = false;
if (algoName == "Quadrangle_2D") {
SMESHDS_SubMesh * sm = meshDS->MeshElements( aFace );
if ( sm ) {
isAllQuad = true;
SMDS_ElemIteratorPtr eIt = sm->GetElements();
while ( isAllQuad && eIt->more() ) {
const SMDS_MeshElement* elem = eIt->next();
isAllQuad = ( elem->NbNodes()==4 ||(_quadraticMesh && elem->NbNodes()==8) );
}
}
}
if ( ! isAllQuad ) {
SMESH_ComputeErrorPtr err = ComputePentahedralMesh(aMesh, aShape);
return ClearAndReturn( aQuads, error(err));
}
StdMeshers_Quadrangle_2D *quadAlgo =
dynamic_cast < StdMeshers_Quadrangle_2D * >(algo);
ASSERT(quadAlgo);
try {
aQuads[i] = quadAlgo->CheckAnd2Dcompute(aMesh, aFace, _quadraticMesh);
if(!aQuads[i]) {
return error( quadAlgo->GetComputeError());
}
}
catch(SALOME_Exception & S_ex) {
return ClearAndReturn( aQuads, error(COMPERR_SLM_EXCEPTION,TComm(S_ex.what()) <<
" Raised by StdMeshers_Quadrangle_2D "
" on face #" << meshDS->ShapeToIndex( aFace )));
}
// 0.2.1 - number of points on the opposite edges must be the same
if (aQuads[i]->side[0]->NbPoints() != aQuads[i]->side[2]->NbPoints() ||
aQuads[i]->side[1]->NbPoints() != aQuads[i]->side[3]->NbPoints()
/*aQuads[i]->side[0]->NbEdges() != 1 ||
aQuads[i]->side[1]->NbEdges() != 1 ||
aQuads[i]->side[2]->NbEdges() != 1 ||
aQuads[i]->side[3]->NbEdges() != 1*/) {
MESSAGE("different number of points on the opposite edges of face " << i);
// Try to go into penta algorithm 'cause it has been improved.
SMESH_ComputeErrorPtr err = ComputePentahedralMesh(aMesh, aShape);
return ClearAndReturn( aQuads, error(err));
}
}
// 1. - identify faces and vertices of the "cube"
// 1.1 - ancestor maps vertex->edges in the cube
// TopTools_IndexedDataMapOfShapeListOfShape MS;
// TopExp::MapShapesAndAncestors(aShape, TopAbs_VERTEX, TopAbs_EDGE, MS);
// 1.2 - first face is choosen as face Y=0 of the unit cube
const TopoDS_Shape & aFace = meshFaces[0]->GetSubShape();
//const TopoDS_Face & F = TopoDS::Face(aFace);
// 1.3 - identify the 4 vertices of the face Y=0: V000, V100, V101, V001
aCube.V000 = aQuads[0]->side[0]->FirstVertex(); // will be (0,0,0) on the unit cube
aCube.V100 = aQuads[0]->side[0]->LastVertex(); // will be (1,0,0) on the unit cube
aCube.V001 = aQuads[0]->side[2]->FirstVertex(); // will be (0,0,1) on the unit cube
aCube.V101 = aQuads[0]->side[2]->LastVertex(); // will be (1,0,1) on the unit cube
TopTools_IndexedMapOfShape MV0;
TopExp::MapShapes(aFace, TopAbs_VERTEX, MV0);
aCube.V010 = OppositeVertex( aCube.V000, MV0, aQuads);
aCube.V110 = OppositeVertex( aCube.V100, MV0, aQuads);
aCube.V011 = OppositeVertex( aCube.V001, MV0, aQuads);
aCube.V111 = OppositeVertex( aCube.V101, MV0, aQuads);
// 1.6 - find remaining faces given 4 vertices
int _indY0 = 0;
int _indY1 = GetFaceIndex(aMesh, aShape, meshFaces,
aCube.V010, aCube.V011, aCube.V110, aCube.V111);
int _indZ0 = GetFaceIndex(aMesh, aShape, meshFaces,
aCube.V000, aCube.V010, aCube.V100, aCube.V110);
int _indZ1 = GetFaceIndex(aMesh, aShape, meshFaces,
aCube.V001, aCube.V011, aCube.V101, aCube.V111);
int _indX0 = GetFaceIndex(aMesh, aShape, meshFaces,
aCube.V000, aCube.V001, aCube.V010, aCube.V011);
int _indX1 = GetFaceIndex(aMesh, aShape, meshFaces,
aCube.V100, aCube.V101, aCube.V110, aCube.V111);
// IPAL21120: SIGSEGV on Meshing attached Compound with Automatic Hexadralization
if ( _indY1 < 1 || _indZ0 < 1 || _indZ1 < 1 || _indX0 < 1 || _indX1 < 1 )
return error(COMPERR_BAD_SHAPE);
aCube.quad_Y0 = aQuads[_indY0];
aCube.quad_Y1 = aQuads[_indY1];
aCube.quad_Z0 = aQuads[_indZ0];
aCube.quad_Z1 = aQuads[_indZ1];
aCube.quad_X0 = aQuads[_indX0];
aCube.quad_X1 = aQuads[_indX1];
// 1.7 - get convertion coefs from face 2D normalized to 3D normalized
Conv2DStruct cx0; // for face X=0
Conv2DStruct cx1; // for face X=1
Conv2DStruct cy0;
Conv2DStruct cy1;
Conv2DStruct cz0;
Conv2DStruct cz1;
GetConv2DCoefs(*aCube.quad_X0, meshFaces[_indX0]->GetSubShape(),
aCube.V000, aCube.V010, aCube.V011, aCube.V001, cx0);
GetConv2DCoefs(*aCube.quad_X1, meshFaces[_indX1]->GetSubShape(),
aCube.V100, aCube.V110, aCube.V111, aCube.V101, cx1);
GetConv2DCoefs(*aCube.quad_Y0, meshFaces[_indY0]->GetSubShape(),
aCube.V000, aCube.V100, aCube.V101, aCube.V001, cy0);
GetConv2DCoefs(*aCube.quad_Y1, meshFaces[_indY1]->GetSubShape(),
aCube.V010, aCube.V110, aCube.V111, aCube.V011, cy1);
GetConv2DCoefs(*aCube.quad_Z0, meshFaces[_indZ0]->GetSubShape(),
aCube.V000, aCube.V100, aCube.V110, aCube.V010, cz0);
GetConv2DCoefs(*aCube.quad_Z1, meshFaces[_indZ1]->GetSubShape(),
aCube.V001, aCube.V101, aCube.V111, aCube.V011, cz1);
// 1.8 - create a 3D structure for normalized values
int nbx = aCube.quad_Z0->side[0]->NbPoints();
if (cz0.a1 == 0.) nbx = aCube.quad_Z0->side[1]->NbPoints();
int nby = aCube.quad_X0->side[0]->NbPoints();
if (cx0.a1 == 0.) nby = aCube.quad_X0->side[1]->NbPoints();
int nbz = aCube.quad_Y0->side[0]->NbPoints();
if (cy0.a1 != 0.) nbz = aCube.quad_Y0->side[1]->NbPoints();
int i1, j1, nbxyz = nbx * nby * nbz;
Point3DStruct *np = new Point3DStruct[nbxyz];
// 1.9 - store node indexes of faces
{
const TopoDS_Face & F = TopoDS::Face(meshFaces[_indX0]->GetSubShape());
faceQuadStruct *quad = aCube.quad_X0;
int i = 0; // j = x/face , k = y/face
int nbdown = quad->side[0]->NbPoints();
int nbright = quad->side[1]->NbPoints();
SMDS_NodeIteratorPtr itf= aMesh.GetSubMesh(F)->GetSubMeshDS()->GetNodes();
while(itf->more()) {
const SMDS_MeshNode * node = itf->next();
if(aTool.IsMedium(node))
continue;
if ( !findIJ( node, quad, i1, j1 ))
return ClearAndReturn( aQuads, false );
int ij1 = j1 * nbdown + i1;
quad->uv_grid[ij1].node = node;
}
for (int i1 = 0; i1 < nbdown; i1++)
for (int j1 = 0; j1 < nbright; j1++) {
int ij1 = j1 * nbdown + i1;
int j = cx0.ia * i1 + cx0.ib * j1 + cx0.ic; // j = x/face
int k = cx0.ja * i1 + cx0.jb * j1 + cx0.jc; // k = y/face
int ijk = k * nbx * nby + j * nbx + i;
//MESSAGE(" "<<ij1<<" "<<i<<" "<<j<<" "<<ijk);
np[ijk].node = quad->uv_grid[ij1].node;
//SCRUTE(np[ijk].nodeId);
}
}
{
const TopoDS_Face & F = TopoDS::Face(meshFaces[_indX1]->GetSubShape());
SMDS_NodeIteratorPtr itf= aMesh.GetSubMesh(F)->GetSubMeshDS()->GetNodes();
faceQuadStruct *quad = aCube.quad_X1;
int i = nbx - 1; // j = x/face , k = y/face
int nbdown = quad->side[0]->NbPoints();
int nbright = quad->side[1]->NbPoints();
while(itf->more()) {
const SMDS_MeshNode * node = itf->next();
if(aTool.IsMedium(node))
continue;
if ( !findIJ( node, quad, i1, j1 ))
return ClearAndReturn( aQuads, false );
int ij1 = j1 * nbdown + i1;
quad->uv_grid[ij1].node = node;
}
for (int i1 = 0; i1 < nbdown; i1++)
for (int j1 = 0; j1 < nbright; j1++) {
int ij1 = j1 * nbdown + i1;
int j = cx1.ia * i1 + cx1.ib * j1 + cx1.ic; // j = x/face
int k = cx1.ja * i1 + cx1.jb * j1 + cx1.jc; // k = y/face
int ijk = k * nbx * nby + j * nbx + i;
//MESSAGE(" "<<ij1<<" "<<i<<" "<<j<<" "<<ijk);
np[ijk].node = quad->uv_grid[ij1].node;
//SCRUTE(np[ijk].nodeId);
}
}
{
const TopoDS_Face & F = TopoDS::Face(meshFaces[_indY0]->GetSubShape());
SMDS_NodeIteratorPtr itf= aMesh.GetSubMesh(F)->GetSubMeshDS()->GetNodes();
faceQuadStruct *quad = aCube.quad_Y0;
int j = 0; // i = x/face , k = y/face
int nbdown = quad->side[0]->NbPoints();
int nbright = quad->side[1]->NbPoints();
while(itf->more()) {
const SMDS_MeshNode * node = itf->next();
if(aTool.IsMedium(node))
continue;
if ( !findIJ( node, quad, i1, j1 ))
return ClearAndReturn( aQuads, false );
int ij1 = j1 * nbdown + i1;
quad->uv_grid[ij1].node = node;
}
for (int i1 = 0; i1 < nbdown; i1++)
for (int j1 = 0; j1 < nbright; j1++) {
int ij1 = j1 * nbdown + i1;
int i = cy0.ia * i1 + cy0.ib * j1 + cy0.ic; // i = x/face
int k = cy0.ja * i1 + cy0.jb * j1 + cy0.jc; // k = y/face
int ijk = k * nbx * nby + j * nbx + i;
//MESSAGE(" "<<ij1<<" "<<i<<" "<<j<<" "<<ijk);
np[ijk].node = quad->uv_grid[ij1].node;
//SCRUTE(np[ijk].nodeId);
}
}
{
const TopoDS_Face & F = TopoDS::Face(meshFaces[_indY1]->GetSubShape());
SMDS_NodeIteratorPtr itf= aMesh.GetSubMesh(F)->GetSubMeshDS()->GetNodes();
faceQuadStruct *quad = aCube.quad_Y1;
int j = nby - 1; // i = x/face , k = y/face
int nbdown = quad->side[0]->NbPoints();
int nbright = quad->side[1]->NbPoints();
while(itf->more()) {
const SMDS_MeshNode * node = itf->next();
if(aTool.IsMedium(node))
continue;
if ( !findIJ( node, quad, i1, j1 ))
return ClearAndReturn( aQuads, false );
int ij1 = j1 * nbdown + i1;
quad->uv_grid[ij1].node = node;
}
for (int i1 = 0; i1 < nbdown; i1++)
for (int j1 = 0; j1 < nbright; j1++) {
int ij1 = j1 * nbdown + i1;
int i = cy1.ia * i1 + cy1.ib * j1 + cy1.ic; // i = x/face
int k = cy1.ja * i1 + cy1.jb * j1 + cy1.jc; // k = y/face
int ijk = k * nbx * nby + j * nbx + i;
//MESSAGE(" "<<ij1<<" "<<i<<" "<<j<<" "<<ijk);
np[ijk].node = quad->uv_grid[ij1].node;
//SCRUTE(np[ijk].nodeId);
}
}
{
const TopoDS_Face & F = TopoDS::Face(meshFaces[_indZ0]->GetSubShape());
SMDS_NodeIteratorPtr itf= aMesh.GetSubMesh(F)->GetSubMeshDS()->GetNodes();
faceQuadStruct *quad = aCube.quad_Z0;
int k = 0; // i = x/face , j = y/face
int nbdown = quad->side[0]->NbPoints();
int nbright = quad->side[1]->NbPoints();
while(itf->more()) {
const SMDS_MeshNode * node = itf->next();
if(aTool.IsMedium(node))
continue;
if ( !findIJ( node, quad, i1, j1 ))
return ClearAndReturn( aQuads, false );
int ij1 = j1 * nbdown + i1;
quad->uv_grid[ij1].node = node;
}
for (int i1 = 0; i1 < nbdown; i1++)
for (int j1 = 0; j1 < nbright; j1++) {
int ij1 = j1 * nbdown + i1;
int i = cz0.ia * i1 + cz0.ib * j1 + cz0.ic; // i = x/face
int j = cz0.ja * i1 + cz0.jb * j1 + cz0.jc; // j = y/face
int ijk = k * nbx * nby + j * nbx + i;
//MESSAGE(" "<<ij1<<" "<<i<<" "<<j<<" "<<ijk);
np[ijk].node = quad->uv_grid[ij1].node;
//SCRUTE(np[ijk].nodeId);
}
}
{
const TopoDS_Face & F = TopoDS::Face(meshFaces[_indZ1]->GetSubShape());
SMDS_NodeIteratorPtr itf= aMesh.GetSubMesh(F)->GetSubMeshDS()->GetNodes();
faceQuadStruct *quad = aCube.quad_Z1;
int k = nbz - 1; // i = x/face , j = y/face
int nbdown = quad->side[0]->NbPoints();
int nbright = quad->side[1]->NbPoints();
while(itf->more()) {
const SMDS_MeshNode * node = itf->next();
if(aTool.IsMedium(node))
continue;
if ( !findIJ( node, quad, i1, j1 ))
return ClearAndReturn( aQuads, false );
int ij1 = j1 * nbdown + i1;
quad->uv_grid[ij1].node = node;
}
for (int i1 = 0; i1 < nbdown; i1++)
for (int j1 = 0; j1 < nbright; j1++) {
int ij1 = j1 * nbdown + i1;
int i = cz1.ia * i1 + cz1.ib * j1 + cz1.ic; // i = x/face
int j = cz1.ja * i1 + cz1.jb * j1 + cz1.jc; // j = y/face
int ijk = k * nbx * nby + j * nbx + i;
//MESSAGE(" "<<ij1<<" "<<i<<" "<<j<<" "<<ijk);
np[ijk].node = quad->uv_grid[ij1].node;
//SCRUTE(np[ijk].nodeId);
}
}
// 2.0 - for each node of the cube:
// - get the 8 points 3D = 8 vertices of the cube
// - get the 12 points 3D on the 12 edges of the cube
// - get the 6 points 3D on the 6 faces with their ID
// - compute the point 3D
// - store the point 3D in SMESHDS, store its ID in 3D structure
int shapeID = meshDS->ShapeToIndex( aShape );
Pt3 p000, p001, p010, p011, p100, p101, p110, p111;
Pt3 px00, px01, px10, px11;
Pt3 p0y0, p0y1, p1y0, p1y1;
Pt3 p00z, p01z, p10z, p11z;
Pt3 pxy0, pxy1, px0z, px1z, p0yz, p1yz;
GetPoint(p000, 0, 0, 0, nbx, nby, nbz, np, meshDS);
GetPoint(p001, 0, 0, nbz - 1, nbx, nby, nbz, np, meshDS);
GetPoint(p010, 0, nby - 1, 0, nbx, nby, nbz, np, meshDS);
GetPoint(p011, 0, nby - 1, nbz - 1, nbx, nby, nbz, np, meshDS);
GetPoint(p100, nbx - 1, 0, 0, nbx, nby, nbz, np, meshDS);
GetPoint(p101, nbx - 1, 0, nbz - 1, nbx, nby, nbz, np, meshDS);
GetPoint(p110, nbx - 1, nby - 1, 0, nbx, nby, nbz, np, meshDS);
GetPoint(p111, nbx - 1, nby - 1, nbz - 1, nbx, nby, nbz, np, meshDS);
for (int i = 1; i < nbx - 1; i++) {
for (int j = 1; j < nby - 1; j++) {
for (int k = 1; k < nbz - 1; k++) {
// *** seulement maillage regulier
// 12 points on edges
GetPoint(px00, i, 0, 0, nbx, nby, nbz, np, meshDS);
GetPoint(px01, i, 0, nbz - 1, nbx, nby, nbz, np, meshDS);
GetPoint(px10, i, nby - 1, 0, nbx, nby, nbz, np, meshDS);
GetPoint(px11, i, nby - 1, nbz - 1, nbx, nby, nbz, np, meshDS);
GetPoint(p0y0, 0, j, 0, nbx, nby, nbz, np, meshDS);
GetPoint(p0y1, 0, j, nbz - 1, nbx, nby, nbz, np, meshDS);
GetPoint(p1y0, nbx - 1, j, 0, nbx, nby, nbz, np, meshDS);
GetPoint(p1y1, nbx - 1, j, nbz - 1, nbx, nby, nbz, np, meshDS);
GetPoint(p00z, 0, 0, k, nbx, nby, nbz, np, meshDS);
GetPoint(p01z, 0, nby - 1, k, nbx, nby, nbz, np, meshDS);
GetPoint(p10z, nbx - 1, 0, k, nbx, nby, nbz, np, meshDS);
GetPoint(p11z, nbx - 1, nby - 1, k, nbx, nby, nbz, np, meshDS);
// 12 points on faces
GetPoint(pxy0, i, j, 0, nbx, nby, nbz, np, meshDS);
GetPoint(pxy1, i, j, nbz - 1, nbx, nby, nbz, np, meshDS);
GetPoint(px0z, i, 0, k, nbx, nby, nbz, np, meshDS);
GetPoint(px1z, i, nby - 1, k, nbx, nby, nbz, np, meshDS);
GetPoint(p0yz, 0, j, k, nbx, nby, nbz, np, meshDS);
GetPoint(p1yz, nbx - 1, j, k, nbx, nby, nbz, np, meshDS);
int ijk = k * nbx * nby + j * nbx + i;
double x = double (i) / double (nbx - 1); // *** seulement
double y = double (j) / double (nby - 1); // *** maillage
double z = double (k) / double (nbz - 1); // *** regulier
Pt3 X;
for (int i = 0; i < 3; i++) {
X[i] = (1 - x) * p0yz[i] + x * p1yz[i]
+ (1 - y) * px0z[i] + y * px1z[i]
+ (1 - z) * pxy0[i] + z * pxy1[i]
- (1 - x) * ((1 - y) * p00z[i] + y * p01z[i])
- x * ((1 - y) * p10z[i] + y * p11z[i])
- (1 - y) * ((1 - z) * px00[i] + z * px01[i])
- y * ((1 - z) * px10[i] + z * px11[i])
- (1 - z) * ((1 - x) * p0y0[i] + x * p1y0[i])
- z * ((1 - x) * p0y1[i] + x * p1y1[i])
+ (1 - x) * ((1 - y) * ((1 - z) * p000[i] + z * p001[i])
+ y * ((1 - z) * p010[i] + z * p011[i]))
+ x * ((1 - y) * ((1 - z) * p100[i] + z * p101[i])
+ y * ((1 - z) * p110[i] + z * p111[i]));
}
SMDS_MeshNode * node = meshDS->AddNode(X[0], X[1], X[2]);
np[ijk].node = node;
meshDS->SetNodeInVolume(node, shapeID);
}
}
}
// find orientation of furute volumes according to MED convention
vector< bool > forward( nbx * nby );
SMDS_VolumeTool vTool;
for (int i = 0; i < nbx - 1; i++) {
for (int j = 0; j < nby - 1; j++) {
int n1 = j * nbx + i;
int n2 = j * nbx + i + 1;
int n3 = (j + 1) * nbx + i + 1;
int n4 = (j + 1) * nbx + i;
int n5 = nbx * nby + j * nbx + i;
int n6 = nbx * nby + j * nbx + i + 1;
int n7 = nbx * nby + (j + 1) * nbx + i + 1;
int n8 = nbx * nby + (j + 1) * nbx + i;
SMDS_VolumeOfNodes tmpVol (np[n1].node,np[n2].node,np[n3].node,np[n4].node,
np[n5].node,np[n6].node,np[n7].node,np[n8].node);
vTool.Set( &tmpVol );
forward[ n1 ] = vTool.IsForward();
}
}
//2.1 - for each node of the cube (less 3 *1 Faces):
// - store hexahedron in SMESHDS
MESSAGE("Storing hexahedron into the DS");
for (int i = 0; i < nbx - 1; i++) {
for (int j = 0; j < nby - 1; j++) {
bool isForw = forward.at( j * nbx + i );
for (int k = 0; k < nbz - 1; k++) {
int n1 = k * nbx * nby + j * nbx + i;
int n2 = k * nbx * nby + j * nbx + i + 1;
int n3 = k * nbx * nby + (j + 1) * nbx + i + 1;
int n4 = k * nbx * nby + (j + 1) * nbx + i;
int n5 = (k + 1) * nbx * nby + j * nbx + i;
int n6 = (k + 1) * nbx * nby + j * nbx + i + 1;
int n7 = (k + 1) * nbx * nby + (j + 1) * nbx + i + 1;
int n8 = (k + 1) * nbx * nby + (j + 1) * nbx + i;
SMDS_MeshVolume * elt;
if ( isForw ) {
elt = aTool.AddVolume(np[n1].node, np[n2].node,
np[n3].node, np[n4].node,
np[n5].node, np[n6].node,
np[n7].node, np[n8].node);
}
else {
elt = aTool.AddVolume(np[n1].node, np[n4].node,
np[n3].node, np[n2].node,
np[n5].node, np[n8].node,
np[n7].node, np[n6].node);
}
meshDS->SetMeshElementOnShape(elt, shapeID);
}
}
}
if ( np ) delete [] np;
return ClearAndReturn( aQuads, true );
}