• On-the-fly repackaging of MP4 files to DASH, HDS, HLS, MSS

• Working modes:

  1. Local - serve locally accessible files (local disk/NFS mounted)
  2. Remote - serve files accessible via HTTP using range requests
  3. Mapped - perform an HTTP request to map the input URI to a locally accessible file

• Adaptive bitrate support

• Playlist support (playing several different media files one after the other) - mapped mode only

• Fallback support for file not found in local/mapped modes (useful in multi-datacenter environments)

• Video codecs: H264, H265 (DASH/HLS)

• Audio codecs: AAC

• Audio only/video only files

• Track selection for multi audio/video MP4 files

• Playback rate change - 0.5x up to 2x (requires libavcodec and libavfilter)

• Source file clipping (only from I-Frame to P-frame)

• Support for variable segment lengths - enabling the player to select the optimal bitrate fast, without the overhead of short segments for the whole duration of the video

• Clipping of MP4 files for progressive download playback

• DASH: common encryption (cenc) support

• HLS: Mux audio and video streams from separate MP4 files (HLS/HDS)

• HLS: Generation of I-frames playlist (EXT-X-I-FRAMES-ONLY)

• HLS: support for AES-128 / SAMPLE-AES encryption

• Only AAC audio is supported (MP3 audio is not)

• Track selection and playback rate change are not supported in progressive download

• I-frames playlist generation is not supported when encryption is enabled

• Tested on Linux only

cd to NGINX source directory and execute:

./configure --add-module=/path/to/nginx-vod-module
make
make install

For asynchronous I/O support add --with-file-aio (highly recommended, local and mapped modes only)

./configure --add-module=/path/to/nginx-vod-module --with-file-aio

For asynchronous file open using thread pool add --with-threads (nginx 1.7.11+, local and mapped modes only)

./configure --add-module=/path/to/nginx-vod-module --with-threads

To compile nginx with debug messages add --with-debug

./configure --add-module=/path/to/nginx-vod-module --with-debug

To disable compiler optimizations (for debugging with gdb) add CFLAGS="-g -O0"

CFLAGS="-g -O0" ./configure ....

If you are using RHEL or CentOS 6, you can install by setting up the repo:

# rpm -ihv http://installrepo.kaltura.org/releases/kaltura-release.noarch.rpm
# yum install kaltura-nginx

If you are using RHEL/CentOS7, install the kaltura-release RPM and modify /etc/yum.repos.d/kaltura.repo to read:

baseurl = http://installrepo.kaltura.org/releases/rhel7/RPMS/$basearch/

Instead of the default:

baseurl = http://installrepo.kaltura.org/releases/latest/RPMS/$basearch/

# wget -O - http://installrepo.kaltura.org/repo/apt/debian/kaltura-deb.gpg.key|apt-key add -
# echo "deb [arch=amd64] http://installrepo.kaltura.org/repo/apt/debian kajam main" > /etc/apt/sources.list.d/kaltura.list
# apt-get update
# apt-get install kaltura-nginx

Ubuntu NOTE: You must also make sure the multiverse repo is enabled in /etc/apt/sources.list

The basic structure of an nginx-vod-module URL is: http://<domain>/<location>/<fileuri>/<filename>

Where:

• domain - the domain of the nginx-vod-module server
• location - the location specified in the nginx conf
• fileuri - a URI to the mp4 file:
  • local mode - the full file path is determined according to the root / alias nginx.conf directives
  • mapped mode - the full file path is determined according to the response from the upstream
  • remote mode - the mp4 file is read from upstream in chunks
  • Note: in mapped & remote modes, the URL of the upstream request is http://<upstream>/<location>/<fileuri>?<extraargs> (extraargs is determined by the vod_upstream_extra_args parameter)
• filename - detailed below

Multi URLs are used to encode several URLs on a single URL. A multi URL can be used to specify the URLs of several different MP4 files that should be included together in a DASH MPD for example.

The structure of a multi URL is: http://<domain>/<location>/<prefix>,<middle1>,<middle2>,<middle3>,<postfix>.urlset/<filename>

The sample URL above represents 3 URLs:

• http://<domain>/<location>/<prefix><middle1><postfix>/<filename>
• http://<domain>/<location>/<prefix><middle2><postfix>/<filename>
• http://<domain>/<location>/<prefix><middle3><postfix>/<filename>

The suffix .urlset (can be changed with vod_multi_uri_suffix) indicates that the URL should be treated as a multi URL.

The following parameters are supported on the URL path:

• clipFrom - an offset in milliseconds since the beginning of the video, where the generated stream should start. For example, .../clipFrom/10000/... will generate a stream that starts 10 seconds into the video.
• clipTo - an offset in milliseconds since the beginning of the video, where the generated stream should end. For example, .../clipTo/60000/... will generate a stream truncated to 60 seconds.
• tracks - can be used to select specific audio/video tracks. The structure of parameter is: v<id1>-v<id2>-a<id1>-a<id2>... For example, .../tracks/v1-a1/... will select the first video track and first audio track. The default is to include all tracks.

The structure of filename is: <basename>[<fileparams>][<trackparams>].<extension>

Where:

• basename + extension - the set of options is packager specific (the list below applies to the default settings):
  • dash - manifest.mpd
  • hds - manifest.f4m
  • hls master playlist - master.m3u8
  • hls media playlist - index.m3u8
  • mss - manifest
• fileparams - can be used to select specific files (URLs) when using multi URLs. For example, manifest-f1.mpd will return an MPD only from the first URL.
• trackparams - can be used to select specific audio/video tracks. For example, manifest-a1.f4m will return an F4M containing only the first audio stream. The default is to include the first audio and first video tracks of each file. The tracks selected on the file name are AND-ed with the tracks selected with the /tracks/ path parameter.

When configured to run in mapped mode, nginx-vod-module issues an HTTP request to a configured upstream server in order to receive the layout of media streams it should generate. The response has to be in JSON format.

This section contains a few simple examples followed by a reference of the supported objects and fields. But first, a couple of definitions:

1. Source Clip - a set of audio and/or video frames (tracks) extracted from a single media file
2. Filter - a manipulation that can be applied on audio/video frames. The following filters are supported:

• rate (speed) change - applies to both audio and video
• audio volume change
• mix - can be used to merge several audio tracks together, or to merge the audio of source A with the video of source B

2. Clip - the result of applying zero or more filters on a set of source clips
3. Sequence - a set of clips that should be played one after the other.
4. Set - several sequences that play together as an adaptive set, each sequence must have the same number of clips.

The JSON below maps the request URI to a single MP4 file:

{
	"sequences" : [
		{
			"clips": [
				{
					"type": "source",
					"path": "/path/to/video.mp4"
				}
			]
		}
	]
}

When using multi URLs, this is the only allowed JSON pattern. In other words, it is not possible to combine more complex JSONs using multi URL.

As an alternative to using multi URL, an adaptive set can be defined via JSON:

{
	"sequences" : [
		{
			"clips": [
				{
					"type": "source",
					"path": "/path/to/bitrate1.mp4"
				}
			]
		},
		{
			"clips": [
				{
					"type": "source",
					"path": "/path/to/bitrate2.mp4"
				}
			]
		}
	]
}

The JSON below will play 35 seconds of video1 followed by 22 seconds of video2:

{
	"durations" : [ 35000, 22000 ],
	"sequences" : [
		{
			"clips": [
				{
					"type": "source",
					"path": "/path/to/video1.mp4"
				},
				{
					"type": "source",
					"path": "/path/to/video2.mp4"
				}
			]
		}
	]
}

The JSON below takes video1, plays it at x1.5 and mixes the audio of the result with the audio of video2, after reducing it to 50% volume:

{
	"sequences" : [
		{
			"clips": [
				{
					"type": "mixFilter",
					"sources": [
						{
							"type": "rateFilter",
							"rate": 1.5,
							"source": {
								"type": "source",
								"path": "/path/to/video1.mp4"
							}
						},
						{
							"type": "gainFilter",
							"gain": 0.5,
							"source": {
								"type": "source",
								"path": "/path/to/video2.mp4",
								"tracks": "a1"
							}
						}
					]
				}
			]
		}
	]
}

Mandatory fields:

• sequences - array of Sequence objects. The mapping has to contain at least one sequence and up to 32 sequences.

Optional fields:

• durations - an array of integers representing clip durations in milliseconds. This field is mandatory if the mapping contains more than a single clip per sequence. If specified, this array must contain at least one element and up to 128 elements.
• discontinuity - boolean, indicates whether the different clips in each sequence have different media parameters. This field has different manifestations according to the delivery protocol - a value of true will generate #EXT-X-DISCONTINUITY in HLS, and a multi period MPD in DASH. The default value is true, set to false only if the media files were transcoded with exactly the same parameters (in AVC for example, the clips should have exactly the same SPS/PPS).
• consistentSequenceMediaInfo - boolean, currently affects only DASH. When set to true (default) the MPD will report the same media parameters in each period element. Setting to false can have severe performance implications for long sequences (nginx-vod-module has to read the media info of all clips included in the mapping in order to generate the MPD)

Mandatory fields:

• clips - array of Clip objects (mandatory). The number of elements must match the number the durations array specified on the set. If the durations array is not specified, the clips array must contain a single element.

Mandatory fields:

• type - a string that defines the type of the clip. Allowed values are:
  • source
  • rateFilter
  • mixFilter
  • gainFilter

Mandatory fields:

• type - a string with the value source
• path - a string containing the path of the MP4 file

Optional fields:

• tracks - a string that specifies the tracks that should be used, the default is "v1-a1", which means the first video track and the first audio track
• clipFrom - an integer that specifies an offset in milliseconds, from the beginning of the media file, from which to start loading frames

Mandatory fields:

• type - a string with the value rateFilter
• rate - a float that specified the acceleration factor, e.g. a value of 2 means double speed. Allowed values are in the range 0.5 - 2 with up to two decimal points
• source - a clip object on which to perform the rate filtering

Mandatory fields:

• type - a string with the value gainFilter
• gain - a float that specified the amplification factor, e.g. a value of 2 means twice as loud. The gain must be positive with up to two decimal points
• source - a clip object on which to perform the gain filtering

Mandatory fields:

• type - a string with the value mixFilter
• sources - an array of Clip objects to mix. This array must contain at least one clip and up to 32 clips.

Nginx-vod-module has the ability to perform on-the-fly encryption for MPEG DASH (CENC) and MSS Play Ready. The encryption is performed while serving a video/audio segment to the client, therefore, when working with DRM it is highly recommended not to serve the content directly from nginx-vod-module to end-users. A more scalable architecture would be to use proxy servers or a CDN in order to cache the encrypted segments.

In order to perform the encryption, this module needs several parameters, including key & key_id, these parameters are fetched from an external server via HTTP GET request. The hostname of that server is configured using the vod_drm_upstream parameter, and the request uri is configured using vod_drm_request_uri (this parameter can include nginx variables). The response of that server is a JSON, with the following format:

[{"pssh": [{"data": "CAESEGMyZjg2MTczN2NjNGYzODIaB2thbHR1cmEiCjBfbmptaWlwbXAqBVNEX0hE", "uuid": "edef8ba9-79d6-4ace-a3c8-27dcd51d21ed"}], "key": "GzoNU9Dfwc//Iq3/zbzMUw==", "key_id": "YzJmODYxNzM3Y2M0ZjM4Mg=="}]

• pssh.data - base64 encoded binary data, the format of this data is drm vendor specific
• pssh.uuid - the drm system UUID, in this case, edef8ba9-79d6-4ace-a3c8-27dcd51d21ed stands for Widevine
• key - base64 encoded encryption key (128 bit)
• key_id - base64 encoded key identifier (128 bit)

1. For medium/large scale deployments, don't have users play the videos directly from nginx-vod-module. Since all the different streaming protocols supported by nginx vod are HTTP based, they can be cached by standard HTTP proxies / CDNs. For medium scale add a layer of caching proxies between the vod module and the end users (can use standard nginx servers with proxy_pass & proxy_cache). For large scale deployments, it is recommended to use a CDN (such as Akamai, Level3 etc.).

   In general, it's best to have nginx vod as close as possible to where the mp4 files are stored, and have the caching proxies as close as possible to the end users.

2. Enable nginx-vod-module caches:

   • vod_moov_cache - saves the need to re-read the video metadata for each segment. This cache should be rather large, in the order of GBs.
   • vod_response_cache - saves the responses of manifest requests. This cache may not be required when using a second layer of caching servers before nginx vod. No need to allocate a large buffer for this cache, 128M is probably more than enough for most deployments.
   • vod_path_mapping_cache - for mapped mode only, few MBs is usually enough.
   • nginx's open_file_cache - caches open file handles.

   The hit/miss ratios of these caches can be tracked by enabling performance counters (vod_performance_counters) and setting up a status page for nginx vod (vod_status)

3. In local & mapped modes, enable aio. - nginx has to be compiled with aio support, and it has to be enabled in nginx conf (aio on). You can verify it works by looking at the performance counters on the vod status page - read_file (aio off) vs. async_read_file (aio on)

4. In local & mapped modes, enable asynchronous file open - nginx has to be compiled with threads support, and vod_open_file_thread_pool has to be specified in nginx.conf. You can verify it works by looking at the performance counters on the vod status page - open_file vs. async_open_file

5. The muxing overhead of the streams generated by this module can be reduced by changing the following parameters:

   • HDS - set vod_hds_generate_moof_atom to off
   • HLS - set vod_hls_align_frames to off and vod_hls_interleave_frames to on

6. Enable gzip compression on manifest responses -

   gzip_types application/vnd.apple.mpegurl video/f4m application/dash+xml text/xml

7. Apply common nginx performance best practices, such as tcp_nodelay=on, client_header_timeout etc.

• syntax: vod segmenter
• default: n/a
• context: location

Enables the nginx-vod module on the enclosing location. Currently the allowed values for segmenter are:

1. none - serves the MP4 files as is
2. dash - Dynamic Adaptive Streaming over HTTP packetizer
3. hds - Adobe HTTP Dynamic Streaming packetizer
4. hls - Apple HTTP Live Streaming packetizer
5. mss - Microsoft Smooth Streaming packetizer

• syntax: vod_mode mode
• default: local
• context: http, server, location

Sets the file access mode - local, remote or mapped (see the features section above for more details)

• syntax: vod_status
• default: n/a
• context: location

Enables the nginx-vod status page on the enclosing location.

• syntax: vod_multi_uri_suffix suffix
• default: .urlset
• context: http, server, location

A URL suffix that is used to identify multi URLs. A multi URL is a way to encode several different URLs that should be played together as an adaptive streaming set, under a single URL. When the default suffix is used, an HLS set URL may look like: http://host/hls/common-prefix,bitrate1,bitrate2,common-suffix.urlset/master.m3u8

• syntax: vod_segment_duration duration
• default: 10s
• context: http, server, location

Sets the segment duration in milliseconds.

• syntax: vod_bootstrap_segment_durations duration
• default: none
• context: http, server, location

Adds a bootstrap segment duration in milliseconds. This setting can be used to make the first few segments shorter than the default segment duration, thus making the adaptive flavor selection kick-in earlier without the overhead of short segments throughout the video.

• syntax: vod_align_segments_to_key_frames on/off
• default: off
• context: http, server, location

When enabled, the module forces all segments to start with a key frame. Enabling this setting can lead to differences between the actual segment durations and the durations reported in the manifest (unless vod_manifest_segment_durations_mode is set to accurate).

• syntax: vod_segment_count_policy last_short/last_long/last_rounded
• default: last_short
• context: http, server, location

Configures the policy for calculating the segment count, for segment_duration = 10 seconds:

• last_short - a file of 33 sec is partitioned as - 10, 10, 10, 3
• last_long - a file of 33 sec is partitioned as - 10, 10, 13
• last_rounded - a file of 33 sec is partitioned as - 10, 10, 13, a file of 38 sec is partitioned as 10, 10, 10, 8

• syntax: vod_manifest_segment_durations_mode estimate/accurate
• default: estimate
• context: http, server, location

Configures the calculation mode of segment durations within manifest requests:

• estimate - reports the duration as configured in nginx.conf, e.g. if vod_segment_duration has the value 10000, an HLS manifest will contain #EXTINF:10
• accurate - reports the exact duration of the segment, taking into account the frame durations, e.g. for a frame rate of 29.97 and 10 second segments it will report the first segment as 10.01. accurate mode also takes into account the key frame alignment, in case vod_align_segments_to_key_frames is on

• syntax: vod_secret_key string
• default: empty
• context: http, server, location

Sets the seed that is used to generate the TS encryption key, if empty, no encryption is performed. The parameter value can contain variables, and will usually have the structure "secret-$vod_filepath". See the list of nginx variables added by this module below.

• syntax: vod_duplicate_bitrate_threshold threshold
• default: 4096
• context: http, server, location

The bitrate threshold for removing identical bitrates, streams whose bitrate differences are less than this value will be considered identical.

• syntax: vod_https_header_name name
• default: empty
• context: http, server, location

Sets the name of an HTTP header whose existence determines whether the request was issued over HTTPS. If not set, the decision is made according to the protocol used to connect to the nginx server. A common scenario for using this setting is a load-balancer placed before the nginx that performs SSL-offloading.

• syntax: vod_segments_base_url url
• default: empty
• context: http, server, location

Sets the base URL (usually domain only) that should be used for delivering video segments. When empty, the host header sent on the request will be used as the domain. The scheme (http/https) used in the returned URLs is determined by:

• the value of vod_segments_base_url, if it starts with http:// or https://
• the existence of a request header whose name matches the value of vod_https_header_name, if vod_https_header_name is not empty
• the type of connection used to connect to the nginx server The setting currently affects only HLS.

• syntax: vod_open_file_thread_pool pool_name
• default: off
• context: http, server, location

Enables the use of asynchronous file open via thread pool. The thread pool must be defined with a thread_pool directive, if no pool name is specified the default pool is used. This directive is supported only on nginx 1.7.11 or newer when compiling with --add-threads. Note: this directive currently disables the use of nginx's open_file_cache by nginx-vod-module

• syntax: vod_moov_cache zone_name zone_size
• default: off
• context: http, server, location

Configures the size and shared memory object name of the moov atom cache

• syntax: vod_response_cache zone_name zone_size
• default: off
• context: http, server, location

Configures the size and shared memory object name of the response cache. The response cache holds manifests and other non-video content (like DASH init segment, HLS encryption key etc.). Video segments are not cached.

• syntax: vod_initial_read_size size
• default: 4K
• context: http, server, location

Sets the size of the initial read operation of the MP4 file.

• syntax: vod_max_moov_size size
• default: 128MB
• context: http, server, location

Sets the maximum supported MP4 moov atom size.

• syntax: vod_cache_buffer_size size
• default: 256K
• context: http, server, location

Sets the size of the cache buffers used when reading MP4 frames.

• syntax: vod_child_request
• default: n/a
• context: location

Configures the enclosing location as handling nginx-vod module child requests (remote/mapped modes only) There should be at least one location with this command when working in remote/mapped modes. Note that multiple vod locations can point to a single location having vod_child_request.

• syntax: vod_child_request_path path
• default: none
• context: location

Sets the path of an internal location that has vod_child_request enabled (remote/mapped modes only)

• syntax: vod_upstream upstream_name
• default: none
• context: http, server, location

Sets the upstream that should be used for reading the MP4 file (remote mode) or mapping the request URI (mapped mode).

• syntax: vod_upstream_host_header host_name
• default: the host name of original request
• context: http, server, location

Sets the value of the HTTP host header that should be sent to the upstream (remote/mapped modes only).

• syntax: vod_upstream_extra_args "arg1=value1&arg2=value2&..."
• default: empty
• context: http, server, location

Extra query string arguments that should be added to the upstream request (remote/mapped modes only). The parameter value can contain variables.

• syntax: vod_connect_timeout timeout
• default: 60s
• context: http, server, location

Sets the timeout in milliseconds for connecting to the upstream (remote/mapped modes only).

• syntax: vod_send_timeout timeout
• default: 60s
• context: http, server, location

Sets the timeout in milliseconds for sending data to the upstream (remote/mapped modes only).

• syntax: vod_read_timeout timeout
• default: 60s
• context: http, server, location

Sets the timeout in milliseconds for reading data from the upstream (remote/mapped modes only).

• syntax: vod_path_mapping_cache zone_name zone_size
• default: off
• context: http, server, location

Configures the size and shared memory object name of the path mapping cache (mapped mode only).

• syntax: vod_path_response_prefix prefix
• default: {"sequences":[{"clips":[{"type":"source","path":"
• context: http, server, location

Sets the prefix that is expected in URI mapping responses (mapped mode only).

• syntax: vod_path_response_postfix postfix
• default: "}]}]}
• context: http, server, location

Sets the postfix that is expected in URI mapping responses (mapped mode only).

• syntax: vod_max_mapping_response_size length
• default: 1K
• context: http, server, location

Sets the maximum length of a path returned from upstream (mapped mode only).

• syntax: vod_fallback_upstream upstream_name
• default: none
• context: http, server, location

Sets an upstream to forward the request to when encountering a file not found error (local/mapped modes only).

• syntax: vod_fallback_connect_timeout timeout
• default: 60s
• context: http, server, location

Sets the timeout in milliseconds for connecting to the fallback upstream (local/mapped modes only).

• syntax: vod_fallback_send_timeout timeout
• default: 60s
• context: http, server, location

Sets the timeout in milliseconds for sending data to the fallback upstream (local/mapped modes only).

• syntax: vod_fallback_read_timeout timeout
• default: 60s
• context: http, server, location

Sets the timeout in milliseconds for reading data from the fallback upstream (local/mapped modes only).

• syntax: vod_proxy_header_name name
• default: X-Kaltura-Proxy
• context: http, server, location

Sets the name of an HTTP header that is used to prevent fallback proxy loops (local/mapped modes only).

• syntax: vod_proxy_header_value name
• default: dumpApiRequest
• context: http, server, location

Sets the value of an HTTP header that is used to prevent fallback proxy loops (local/mapped modes only).

• syntax: vod_clip_to_param_name name
• default: clipTo
• context: http, server, location

The name of the clip to request parameter.

• syntax: vod_clip_from_param_name name
• default: clipFrom
• context: http, server, location

The name of the clip from request parameter.

• syntax: vod_tracks_param_name name
• default: tracks
• context: http, server, location

The name of the tracks request parameter.

• syntax: vod_speed_param_name name
• default: tracks
• context: http, server, location

The name of the speed request parameter.

• syntax: vod_performance_counters zone_name
• default: off
• context: http, server, location

Configures the shared memory object name of the performance counters

• syntax: vod_last_modified time
• default: none
• context: http, server, location

Sets the value of the Last-Modified header returned on the response, by default the module does not return a Last-Modified header. The reason for having this parameter here is in order to support If-Modified-Since / If-Unmodified-Since. Since nginx's builtin ngx_http_not_modified_filter_module runs before any other header filter module, it will not see any headers set by add_headers / more_set_headers. This makes nginx always reply as if the content changed (412 for If-Unmodified-Since / 200 for If-Modified-Since)

• syntax: vod_last_modified_types mime-type1 mime-type2 ...
• default: none
• context: http, server, location

Sets the MIME types for which the Last-Modified header should be set. The special value "*" matches any MIME type.

• syntax: vod_drm_enabled on/off
• default: off
• context: http, server, location

When enabled, the module encrypts the media segments according to the response it gets from the drm upstream. Currently supported only for dash and mss (play ready).

• syntax: vod_drm_clear_lead_segment_count count
• default: 1
• context: http, server, location

Sets the number of clear (unencrypted) segments in the beginning of the stream. A clear lead enables the player to start playing without having to wait for the license response.

• syntax: vod_drm_max_info_length length
• default: 4K
• context: http, server, location

Sets the maximum length of a drm info returned from upstream.

• syntax: vod_drm_upstream upstream_name
• default: none
• context: http, server, location

Sets the upstream that should be used for getting the DRM info for the file.

• syntax: vod_drm_connect_timeout timeout
• default: 60s
• context: http, server, location

Sets the timeout in milliseconds for connecting to the upstream.

• syntax: vod_drm_send_timeout timeout
• default: 60s
• context: http, server, location

Sets the timeout in milliseconds for sending data to the upstream.

• syntax: vod_drm_read_timeout timeout
• default: 60s
• context: http, server, location

Sets the timeout in milliseconds for reading data from the upstream.

• syntax: vod_drm_info_cache zone_name zone_size
• default: off
• context: http, server, location

Configures the size and shared memory object name of the drm info cache.

• syntax: vod_drm_request_uri uri
• default: $vod_suburi
• context: http, server, location

Sets the uri of drm info requests, the parameter value can contain variables. In case of multi url, $vod_suburi will be the current sub uri (a separate drm info request is issued per sub URL)

• syntax: vod_dash_absolute_manifest_urls on/off
• default: on
• context: http, server, location

When enabled the server returns absolute URLs in MPD requests

• syntax: vod_dash_manifest_file_name_prefix name
• default: manifest
• context: http, server, location

The name of the MPD file (an mpd extension is implied).

• syntax: vod_dash_init_file_name_prefix name
• default: init
• context: http, server, location

The name of the MP4 initialization file (an mp4 extension is implied).

• syntax: vod_dash_fragment_file_name_prefix name
• default: frag
• context: http, server, location

The name of the fragment files (an m4s extension is implied).

• syntax: vod_dash_manifest_format format
• default: segmenttimeline
• context: http, server, location

Sets the MPD format, available options are:

• segmentlist - uses SegmentList and SegmentURL tags, in this format the URL of each fragment is explicitly set in the MPD
• segmenttemplate - uses SegmentTemplate, reporting a single duration for all fragments
• segmenttimeline - uses SegmentTemplate and SegmentTimeline to explicitly set the duration of the fragments

• syntax: vod_hds_manifest_file_name_prefix name
• default: manifest
• context: http, server, location

The name of the HDS manifest file (an f4m extension is implied).

• syntax: vod_hds_fragment_file_name_prefix name
• default: frag
• context: http, server, location

The prefix of fragment file names, the actual file name is frag-f<file-index>-v<video-track-index>-a<audio-track-index>-Seg1-Frag<index>.

• syntax: vod_hds_generate_moof_atom on/off
• default: on
• context: http, server, location

When enabled the module generates a moof atom in the HDS fragments, when disabled only an mdat atom is generated. Turning this parameter off reduces the packaging overhead, however the default is on since Adobe tools are generating this atom.

• syntax: vod_hls_encryption_method method
• default: none
• context: http, server, location

Sets the encryption method of HLS segments, allowed values are: none (default), aes-128, sample-aes.

• syntax: vod_hls_absolute_master_urls on/off
• default: on
• context: http, server, location

When enabled the server returns absolute playlist URLs in master playlist requests

• syntax: vod_hls_absolute_index_urls on/off
• default: on
• context: http, server, location

When enabled the server returns absolute segment URLs in media playlist requests

• syntax: vod_hls_absolute_iframe_urls on/off
• default: off
• context: http, server, location

When enabled the server returns absolute segment URLs in iframe playlist requests

• syntax: vod_hls_master_file_name_prefix name
• default: master
• context: http, server, location

The name of the HLS master playlist file (an m3u8 extension is implied).

• syntax: vod_hls_index_file_name_prefix name
• default: index
• context: http, server, location

The name of the HLS media playlist file (an m3u8 extension is implied).

• syntax: vod_hls_iframes_file_name_prefix name
• default: iframes
• context: http, server, location

The name of the HLS I-frames playlist file (an m3u8 extension is implied).

• syntax: vod_hls_segment_file_name_prefix name
• default: seg
• context: http, server, location

The prefix of segment file names, the actual file name is seg-<index>-v<video-track-index>-a<audio-track-index>.ts.

• syntax: vod_hls_encryption_key_file_name name
• default: encryption.key
• context: http, server, location

The name of the encryption key file name (only relevant when vod_secret_key is used).

• syntax: vod_hls_interleave_frames on/off
• default: off
• context: http, server, location

When enabled, the HLS muxer interleaves frames of different streams (audio / video). When disabled, on every switch between audio / video the muxer flushes the MPEG TS packet.

• syntax: vod_hls_align_frames on/off
• default: on
• context: http, server, location

When enabled, every video / audio frame is aligned to MPEG TS packet boundary, padding is added as needed.

• syntax: vod_mss_manifest_file_name_prefix name
• default: manifest
• context: http, server, location

The name of the manifest file (has no extension).

The module adds the following nginx variables:

• $vod_suburi - the current sub uri. For example, if the url is: http://<domain>/<location>/<prefix>,<middle1>,<middle2>,<middle3>,<postfix>.urlset/<filename> $vod_suburi will have the value http://<domain>/<location>/<prefix><middle1><postfix>/<filename> when processing the first uri.
• $vod_filepath - in local / mapped modes, the file path of current sub uri. In remote mode, has the same value as $vod_suburi.

Note: Configuration directives that can accept variables are explicitly marked as such.

http {
	upstream fallback {
		server kalhls-a-pa.origin.kaltura.com:80;
	}

	server {		
		open_file_cache          max=1000 inactive=5m;
		open_file_cache_valid    2m;
		open_file_cache_min_uses 1;
		open_file_cache_errors   on;

		aio on;

		location /content/ {
			vod hls;
			vod_mode local;
			vod_moov_cache moov_cache 512m;
			vod_fallback_upstream fallback;

			root /web/content;
			
			gzip on;
			gzip_types application/vnd.apple.mpegurl;

			expires 100d;
			add_header Last-Modified "Sun, 19 Nov 2000 08:52:00 GMT";
		}
	}
}

http {
	upstream kalapi {
		server www.kaltura.com:80;
	}

	upstream fallback {
		server kalhls-a-pa.origin.kaltura.com:80;
	}

	server {

		open_file_cache          max=1000 inactive=5m;
		open_file_cache_valid    2m;
		open_file_cache_min_uses 1;
		open_file_cache_errors   on;

		aio on;
		
		location ^~ /__child_request__/ {
			internal;
			vod_child_request;
		}
	
		location ~ ^/p/\d+/(sp/\d+/)?serveFlavor/ {
			vod hls;
			vod_mode mapped;
			vod_moov_cache moov_cache 512m;
			vod_secret_key "mukkaukk$vod_filepath";
			vod_hls_encryption_method aes-128;
			vod_child_request_path /__child_request__/;
			vod_upstream kalapi;
			vod_upstream_host_header www.kaltura.com;
			vod_upstream_extra_args "pathOnly=1";
			vod_path_mapping_cache mapping_cache 5m;
			vod_fallback_upstream fallback;

			gzip on;
			gzip_types application/vnd.apple.mpegurl;

			expires 100d;
			add_header Last-Modified "Sun, 19 Nov 2000 08:52:00 GMT";
		}
	}
}

http {
	upstream kalapi {
		server www.kaltura.com:80;
	}

	server {		
		location ^~ /__child_request__/ {
			internal;
			vod_child_request;
		}

		location ~ ^/p/\d+/(sp/\d+/)?serveFlavor/ {
			vod hls;
			vod_mode remote;
			vod_moov_cache moov_cache 512m;
			vod_secret_key "mukkaukk$vod_suburi";
			vod_hls_encryption_method aes-128;
			vod_child_request_path /__child_request__/;
			vod_upstream kalapi;
			vod_upstream_host_header www.kaltura.com;

			gzip on;
			gzip_types application/vnd.apple.mpegurl;

			expires 100d;
			add_header Last-Modified "Sun, 19 Nov 2000 08:52:00 GMT";
		}
	}
}

All code in this project is released under the AGPLv3 license unless a different license for a particular library is specified in the applicable library path.

Copyright © Kaltura Inc. All rights reserved.