Skip to content

jupvfranco/ponyc

 
 

Getting help

Need help? Not to worry, we have you covered.

We have a couple resources designed to help you learn, we suggest starting with the tutorial and from there, moving on to the Pony Patterns book. Additionally, standard library documentation is available online.

If you are looking for an answer "right now", we suggest you give our IRC channel a try. It's #ponylang on Freenode. If you ask a question, be sure to hang around until you get an answer. If you don't get one, or IRC isn't your thing, we have a friendly mailing list you can try. Whatever your question is, it isn't dumb, and we won't get annoyed.

Think you've found a bug? Check your understanding first by writing the mailing list. Once you know it's a bug, open an issue.

Editor support

Installation

Using Docker

Want to use the latest revision of Pony source, but don't want to build from source yourself? You can run the ponylang/ponyc Docker container, which is created from an automated build at each commit to master.

You'll need to install Docker using the instructions here. Then you can pull the latest ponylang/ponyc image using this command:

docker pull ponylang/ponyc:latest

Then you'll be able to run ponyc to compile a Pony program in a given directory, running a command like this:

docker run -v /path/to/my-code:/src/main ponylang/ponyc

If you're unfamiliar with Docker, remember to ensure that whatever path you provide for /path/to/my-code is a full path name and not a relative path, and also note the lack of a closing slash, /, at the end of the path name.

Note that if your host doesn't match the docker container, you'll probably have to run the resulting program inside the docker container as well, using a command like this:

docker run -v /path/to/my-code:/src/main ponylang/ponyc ./main

If you're using docker-machine instead of native docker, make sure you aren't using an incompatible version of Virtualbox.

Linux using an RPM package (via Bintray)

For Red Hat, CentOS, Oracle Linux, or Fedora Linux, the master and release branches are packaged and available on Bintray (pony-language/ponyc-rpm).

To install release builds via Yum:

wget https://bintray.com/pony-language/ponyc-rpm/rpm -O bintray-pony-language-ponyc-rpm.repo
sudo mv bintray-pony-language-ponyc-rpm.repo /etc/yum.repos.d/

sudo yum install ponyc-release

Or, for master builds:

yum install ponyc-master

Linux using a DEB package (via Bintray)

For Ubuntu or Debian Linux, the master and release branches are packaged and available on Bintray (pony-language/ponyc-debian).

To install release builds via Apt:

echo "deb https://dl.bintray.com/pony-language/ponyc-debian pony-language main" | sudo tee -a /etc/apt/sources.list
sudo apt-get update
sudo apt-get install ponyc-release

Or, for master builds:

sudo apt-get install ponyc-master

Windows using ZIP (via Bintray)

For Windows, the master and release branches are packaged and available on Bintray (pony-language/ponyc-win):

Invoke-WebRequest -Uri https://dl.bintray.com/pony-language/ponyc-win/ponyc-VERSION.zip -UseBasicParsing -OutFile ponyc-VERSION.zip
7z x .\ponyc-VERSION.zip
.\ponyc-VERSION\ponyc\bin\ponyc.exe --version

Windows users will need to install Visual Studio 2015 (or the Visual C++ Build Tools 2015) and the Windows 10 SDK in order to build programs with ponyc. It can be downloaded from Microsoft (Visual Studio, Visual C++ Build Tools 2015, SDK).

Mac OS X using Homebrew

$ brew update
$ brew install ponyc

Arch Linux

pacman -S ponyc

Gentoo Linux

layman -a stefantalpalaru
emerge dev-lang/pony

A live ebuild is also available in the overlay (dev-lang/pony-9999) and for Vim users there's app-vim/pony-syntax.

Building ponyc from source

First of all, you need a compiler with decent C11 support. The following compilers are supported, though we recommend to use the most recent versions.

  • GCC >= 4.7
  • Clang >= 3.3
  • MSVC >= 2013
  • XCode Clang >= 6.0

Pony requires one of the following versions of LLVM:

  • 3.7.1
  • 3.8.1
  • 3.9.1

Compiling Pony is only possible on x86 and ARM (either 32 or 64 bits).

Building on Linux

Get Pony-Sources from Github (More Information about Set Up Git https://help.github.com/articles/set-up-git/ ):

$ sudo apt install git
$ git clone git://github.com/ponylang/ponyc

Linux and OS X

Arch

pacman -S llvm make ncurses openssl pcre2 zlib

To build ponyc and compile helloworld:

$ make
$ ./build/release/ponyc examples/helloworld

If you get errors like

/usr/bin/ld.gold: error: ./fb.o: requires dynamic R_X86_64_32 reloc against 'Array_String_val_Trace' which may overflow at runtime; recompile with -fPIC

try running ponyc with the --pic flag.

$ ./build/release/ponyc --pic examples/helloworld

Debian Jessie

Add the following to /etc/apt/sources:

deb http://llvm.org/apt/jessie/ llvm-toolchain-jessie-3.8 main
deb-src http://llvm.org/apt/jessie/ llvm-toolchain-jessie-3.8 main

Install the LLVM toolchain public GPG key, update apt and install packages:

$ wget -O - http://llvm.org/apt/llvm-snapshot.gpg.key|sudo apt-key add -
$ sudo apt-get update
$ sudo apt-get install make gcc g++ git zlib1g-dev libncurses5-dev \
                       libssl-dev llvm-3.8-dev

Debian Jessie and some other Linux distributions don't include pcre2 in their package manager. pcre2 is used by the Pony regex package. To download and build pcre2 from source:

$ wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre2-10.21.tar.bz2
$ tar xvf pcre2-10.21.tar.bz2
$ cd pcre2-10.21
$ ./configure --prefix=/usr
$ make
$ sudo make install

To build ponyc, compile and run helloworld:

$ cd ~/ponyc/
$ make
$ ./build/release/ponyc examples/helloworld
$ ./helloworld

Ubuntu (14.04, 15.10, 16.04)

$ sudo apt-get update
$ sudo apt-get install -y build-essential git zlib1g-dev libncurses5-dev libssl-dev libpcre2-dev

You should install LLVM 3.7.1, 3.8.1, or 3.9.1 from the LLVM download page under Pre-Built Binaries.

To build ponyc, compile and run helloworld:

$ cd ~/ponyc/
$ make
$ ./build/release/ponyc examples/helloworld
$ ./helloworld

Other Linux distributions

You need to have the development versions of the following installed:

  • LLVM 3.7.1, 3.8.1, or 3.9.1
  • zlib
  • ncurses
  • pcre2
  • libssl

If your distribution doesn't have a package for prce2, you will need to download and build it from source:

$ wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre2-10.21.tar.bz2
$ tar xvf pcre2-10.21.tar.bz2
$ cd pcre2-10.21
$ ./configure --prefix=/usr
$ make
$ sudo make install

Finally to build ponyc, compile and run the hello world app:

$ cd ~/ponyc/
$ make
$ ./build/release/ponyc examples/helloworld
$ ./helloworld

Building on FreeBSD

First, install the required dependencies:

sudo pkg install gmake
sudo pkg install llvm38
sudo pkg install pcre2
sudo pkg install libunwind

This will build ponyc and compile helloworld:

$ gmake
$ ./build/release/ponyc examples/helloworld

Please note that on 32-bit X86, using LLVM 3.7.1 or 3.8.1 on FreeBSD currently produces executables that don't run. Please use LLVM 3.9.1. 64-bit X86 does not have this problem, and works fine with LLVM 3.7.1 and 3.8.1.

Building on Mac OS X

Linux and OS X

You'll need llvm 3.7.1 or 3.8.1 and the pcre2 library to build Pony. You can use either homebrew or MacPorts to install these dependencies.

Installation via homebrew:

$ brew update
$ brew install homebrew/versions/llvm38 pcre2 libressl

Installation via MacPorts:

$ sudo port install llvm-3.8 pcre2 libressl
$ sudo port select --set llvm mp-llvm-3.8

Launch the build with make after installing the dependencies:

$ make
$ ./build/release/ponyc examples/helloworld

Building on Windows

Windows

Note: it may also be possible (as tested on build 14372.0 of Windows 10) to build Pony using the Ubuntu 14.04 instructions inside Bash on Ubuntu on Windows.

Building on Windows requires the following:

  • Visual Studio 2015; make sure that a Windows 10 SDK is installed; otherwise install it from here.
  • Python (3.5 or 2.7) needs to be in your PATH.

In a command prompt in the ponyc source directory, run the following:

> make.bat configure

(You only need to run this the first time you build the project.)

> make.bat build test

This will automatically perform the following steps:

  • Download some pre-built libraries used for building the Pony compiler and standard library.
  • Build the pony compiler in the build-<config>-<llvm-version> directory.
  • Build the unit tests for the compiler and the standard library.
  • Run the unit tests.

You can provide the following options to make.bat when running the build or test commands:

  • --config debug|release: whether or not to build a debug or release build (debug is the default).
  • --llvm <version>: the LLVM version to build against (3.9.1 is the default).

Note that you need to provide these options each time you run make.bat; the system will not remember your last choice.

Other commands include clean, which will clean a specified configuration; and distclean, which will wipe out the entire build directory. You will need to run make configure after a distclean.

Building with link-time optimisation (LTO)

You can enable LTO when building the compiler in release mode. There are slight differences between platforms so you'll need to do a manual setup. LTO is enabled by setting lto to yes in the build command line:

$ make lto=yes

If the build fails, you have to specify the LTO plugin for your compiler in the LTO_PLUGIN variable. For example:

$ make LTO_PLUGIN=/usr/lib/LLVMgold.so

Refer to your compiler documentation for the plugin to use in your case.

VirtualBox

Pony binaries can trigger illegal instruction errors under VirtualBox 4.x, for at least the x86_64 platform and possibly others.

Use VirtualBox 5.x to avoid possible problems.

AVX2 Support

The Pony prebuilt binaries trigger illegal instruction errors under CPUs without AVX2 support.

Building Pony on Non-x86 platforms

On ARM platforms, the default gcc architecture specification used in the Makefile of native does not work correctly, and can even result in the gcc compiler crashing. You will have to override the compiler architecture specification on the make command line. For example, on a RaspberryPi2 you would say:

$ make arch=armv7

To get a complete list of acceptable architecture names, use the gcc command:

gcc -march=none

This will result in an error message plus a listing off all architecture types acceptable on your platform.

About

Pony is an open-source, object-oriented, actor-model, capabilities-secure, high performance programming language

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 43.4%
  • C 35.4%
  • Pony 19.4%
  • Python 0.8%
  • Makefile 0.6%
  • GAP 0.2%
  • Other 0.2%