void
log_element(ElementType *e)
{
base_log("Element\n");
base_log("Description: %s\n", DESCRIPTION_NAME(e));
base_log("Name on PCB: %s\n", NAMEONPCB_NAME(e));
base_log("Value: %s\n", VALUE_NAME(e));
base_log("Flags: %04x\n", FLAG_VALUE(e->Flags));
base_log("MarkX, MarkY: %d, %d\n", e->MarkX, e->MarkY);
base_log("PinN: %d\n", e->PinN);
base_log("PadN: %d\n", e->PadN);
base_log("LineN: %d\n", e->LineN);
base_log("ArcN: %d\n", e->ArcN);
base_log("Attributes number: %d\n", e->Attributes.Number);
int i = 0;
PAD_LOOP(e);
{
base_log("Pad %d\n", i++);
log_pad(pad);
}
END_LOOP;
i = 0;
PIN_LOOP(e);
{
base_log("Pin %d\n", i++);
log_pin(pin);
}
END_LOOP;
}
static int
replace_footprints(ElementTypePtr new_element)
{
int replaced = 0;
int i = 0;
ELEMENT_LOOP (PCB->Data);
{
if (match_mode != MATCH_MODE_AUTO
|| strcmp(DESCRIPTION_NAME(new_element),
DESCRIPTION_NAME(element)) == 0) {
Boolean matched = False;
switch (style) {
case STYLE_ALL:
matched = True;
break;
case STYLE_SELECTED:
matched = TEST_FLAG(SELECTEDFLAG, element);
break;
case STYLE_NAMED:
for (i = 0; i < global_argc; i++) {
if (NAMEONPCB_NAME(element)
&& strcasecmp(NAMEONPCB_NAME(element), global_argv[i]) == 0) {
matched = True;
break;
}
}
break;
}
if (matched) {
if (TEST_FLAG (LOCKFLAG, element)) {
base_log("Skipping \"%s\". Element locked.\n",
NAMEONPCB_NAME(element));
} else {
debug_log("Considering \"%s\".\n", NAMEONPCB_NAME(element));
if (replace_one_footprint(element, new_element)) {
base_log("Replaced \"%s\".\n", NAMEONPCB_NAME(element));
replaced++;
}
}
}
}
}
END_LOOP;
return replaced;
}
void
ghid_pinout_window_show (GHidPort * out, ElementType * element)
{
GtkWidget *button, *vbox, *hbox, *preview, *top_window;
gchar *title;
int width, height;
if (!element)
return;
title = g_strdup_printf ("%s [%s,%s]",
UNKNOWN (DESCRIPTION_NAME (element)),
UNKNOWN (NAMEONPCB_NAME (element)),
UNKNOWN (VALUE_NAME (element)));
top_window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
gtk_window_set_title (GTK_WINDOW (top_window), title);
g_free (title);
gtk_window_set_wmclass (GTK_WINDOW (top_window), "PCB_Pinout", "PCB");
gtk_container_set_border_width (GTK_CONTAINER (top_window), 4);
vbox = gtk_vbox_new (FALSE, 0);
gtk_container_add (GTK_CONTAINER (top_window), vbox);
preview = ghid_pinout_preview_new (element);
gtk_box_pack_start (GTK_BOX (vbox), preview, TRUE, TRUE, 0);
ghid_pinout_preview_get_natural_size (GHID_PINOUT_PREVIEW (preview),
&width, &height);
gtk_window_set_default_size (GTK_WINDOW (top_window),
width + 50, height + 50);
hbox = gtk_hbutton_box_new ();
gtk_button_box_set_layout (GTK_BUTTON_BOX (hbox), GTK_BUTTONBOX_END);
gtk_box_pack_start (GTK_BOX (vbox), hbox, FALSE, FALSE, 0);
button = gtk_button_new_from_stock (GTK_STOCK_CLOSE);
g_signal_connect (G_OBJECT (button), "clicked",
G_CALLBACK (pinout_close_cb), top_window);
gtk_box_pack_start (GTK_BOX (hbox), button, TRUE, TRUE, 0);
gtk_widget_realize (top_window);
if (Settings.AutoPlace)
gtk_window_move (GTK_WINDOW (top_window), 10, 10);
gtk_widget_show_all (top_window);
}
/* ---------------------------------------------------------------------------
* writes element data
*/
static void
WriteElementData (FILE * FP, DataType *Data)
{
GList *n, *p;
for (n = Data->Element; n != NULL; n = g_list_next (n))
{
ElementType *element = n->data;
/* only non empty elements */
if (!element->LineN && !element->PinN && !element->ArcN
&& !element->PadN)
continue;
/* the coordinates and text-flags are the same for
* both names of an element
*/
fprintf (FP, "\nElement[%s ", F2S (element, ELEMENT_TYPE));
PrintQuotedString (FP, (char *)EMPTY (DESCRIPTION_NAME (element)));
fputc (' ', FP);
PrintQuotedString (FP, (char *)EMPTY (NAMEONPCB_NAME (element)));
fputc (' ', FP);
PrintQuotedString (FP, (char *)EMPTY (VALUE_NAME (element)));
pcb_fprintf (FP, " %mr %mr %mr %mr %d %d %s]\n(\n",
element->MarkX, element->MarkY,
DESCRIPTION_TEXT (element).X - element->MarkX,
DESCRIPTION_TEXT (element).Y - element->MarkY,
DESCRIPTION_TEXT (element).Direction,
DESCRIPTION_TEXT (element).Scale,
F2S (&(DESCRIPTION_TEXT (element)), ELEMENTNAME_TYPE));
WriteAttributeList (FP, &element->Attributes, "\t");
for (p = element->Pin; p != NULL; p = g_list_next (p))
{
PinType *pin = p->data;
pcb_fprintf (FP, "\tPin[%mr %mr %mr %mr %mr %mr ",
pin->X - element->MarkX,
pin->Y - element->MarkY,
pin->Thickness, pin->Clearance,
pin->Mask, pin->DrillingHole);
PrintQuotedString (FP, (char *)EMPTY (pin->Name));
fprintf (FP, " ");
PrintQuotedString (FP, (char *)EMPTY (pin->Number));
fprintf (FP, " %s]\n", F2S (pin, PIN_TYPE));
}
for (p = element->Pad; p != NULL; p = g_list_next (p))
{
PadType *pad = p->data;
pcb_fprintf (FP, "\tPad[%mr %mr %mr %mr %mr %mr %mr ",
pad->Point1.X - element->MarkX,
pad->Point1.Y - element->MarkY,
pad->Point2.X - element->MarkX,
pad->Point2.Y - element->MarkY,
pad->Thickness, pad->Clearance, pad->Mask);
PrintQuotedString (FP, (char *)EMPTY (pad->Name));
fprintf (FP, " ");
PrintQuotedString (FP, (char *)EMPTY (pad->Number));
fprintf (FP, " %s]\n", F2S (pad, PAD_TYPE));
}
for (p = element->Line; p != NULL; p = g_list_next (p))
{
LineType *line = p->data;
pcb_fprintf (FP, "\tElementLine [%mr %mr %mr %mr %mr]\n",
line->Point1.X - element->MarkX,
line->Point1.Y - element->MarkY,
line->Point2.X - element->MarkX,
line->Point2.Y - element->MarkY,
line->Thickness);
}
for (p = element->Arc; p != NULL; p = g_list_next (p))
{
ArcType *arc = p->data;
pcb_fprintf (FP, "\tElementArc [%mr %mr %mr %mr %ma %ma %mr]\n",
arc->X - element->MarkX,
arc->Y - element->MarkY,
arc->Width, arc->Height,
arc->StartAngle, arc->Delta,
arc->Thickness);
}
fputs ("\n\t)\n", FP);
}
}
/* ---------------------------------------------------------------------------
* writes element data
*/
static void
WriteElementData (FILE * FP, DataTypePtr Data)
{
int n, p;
for (n = 0; n < Data->ElementN; n++)
{
ElementTypePtr element = &Data->Element[n];
/* only non empty elements */
if (!element->LineN && !element->PinN && !element->ArcN
&& !element->PadN)
continue;
/* the coordinates and text-flags are the same for
* both names of an element
*/
fprintf (FP, "\nElement[%s ", F2S (element, ELEMENT_TYPE));
PrintQuotedString (FP, (char *)EMPTY (DESCRIPTION_NAME (element)));
fputc (' ', FP);
PrintQuotedString (FP, (char *)EMPTY (NAMEONPCB_NAME (element)));
fputc (' ', FP);
PrintQuotedString (FP, (char *)EMPTY (VALUE_NAME (element)));
fprintf (FP, " %i %i %i %i %i %i %s]\n(\n",
(int) element->MarkX, (int) element->MarkY,
(int) (DESCRIPTION_TEXT (element).X -
element->MarkX),
(int) (DESCRIPTION_TEXT (element).Y -
element->MarkY),
(int) DESCRIPTION_TEXT (element).Direction,
(int) DESCRIPTION_TEXT (element).Scale,
F2S (&(DESCRIPTION_TEXT (element)), ELEMENTNAME_TYPE));
WriteAttributeList (FP, &element->Attributes, "\t");
for (p = 0; p < element->PinN; p++)
{
PinTypePtr pin = &element->Pin[p];
fprintf (FP, "\tPin[%i %i %i %i %i %i ",
(int) (pin->X - element->MarkX),
(int) (pin->Y - element->MarkY),
(int) pin->Thickness, (int) pin->Clearance,
(int) pin->Mask, (int) pin->DrillingHole);
PrintQuotedString (FP, (char *)EMPTY (pin->Name));
fprintf (FP, " ");
PrintQuotedString (FP, (char *)EMPTY (pin->Number));
fprintf (FP, " %s]\n", F2S (pin, PIN_TYPE));
}
for (p = 0; p < element->PadN; p++)
{
PadTypePtr pad = &element->Pad[p];
fprintf (FP, "\tPad[%i %i %i %i %i %i %i ",
(int) (pad->Point1.X - element->MarkX),
(int) (pad->Point1.Y - element->MarkY),
(int) (pad->Point2.X - element->MarkX),
(int) (pad->Point2.Y - element->MarkY),
(int) pad->Thickness, (int) pad->Clearance,
(int) pad->Mask);
PrintQuotedString (FP, (char *)EMPTY (pad->Name));
fprintf (FP, " ");
PrintQuotedString (FP, (char *)EMPTY (pad->Number));
fprintf (FP, " %s]\n", F2S (pad, PAD_TYPE));
}
for (p = 0; p < element->LineN; p++)
{
LineTypePtr line = &element->Line[p];
fprintf (FP,
"\tElementLine [%i %i %i %i %i]\n",
(int) (line->Point1.X -
element->MarkX),
(int) (line->Point1.Y -
element->MarkY),
(int) (line->Point2.X -
element->MarkX),
(int) (line->Point2.Y -
element->MarkY), (int) line->Thickness);
}
for (p = 0; p < element->ArcN; p++)
{
ArcTypePtr arc = &element->Arc[p];
fprintf (FP,
"\tElementArc [%i %i %i %i %i %i %i]\n",
(int) (arc->X - element->MarkX),
(int) (arc->Y - element->MarkY),
(int) arc->Width, (int) arc->Height,
(int) arc->StartAngle, (int) arc->Delta,
(int) arc->Thickness);
}
fputs ("\n\t)\n", FP);
}
}
/* ---------------------------------------------------------------------------
* copies data from one element to another and creates the destination
* if necessary
*/
ElementType *
CopyElementLowLevel (DataType *Data, ElementType *Src,
bool uniqueName, Coord dx, Coord dy, int mask_flags)
{
int i;
ElementType *Dest;
/* both coordinates and flags are the same */
Dest = CreateNewElement (Data, &PCB->Font,
MaskFlags (Src->Flags, mask_flags),
DESCRIPTION_NAME (Src), NAMEONPCB_NAME (Src),
VALUE_NAME (Src), DESCRIPTION_TEXT (Src).X + dx,
DESCRIPTION_TEXT (Src).Y + dy,
DESCRIPTION_TEXT (Src).Direction,
DESCRIPTION_TEXT (Src).Scale,
MaskFlags (DESCRIPTION_TEXT (Src).Flags,
mask_flags), uniqueName);
/* abort on error */
if (!Dest)
return (Dest);
ELEMENTLINE_LOOP (Src);
{
CreateNewLineInElement (Dest, line->Point1.X + dx,
line->Point1.Y + dy, line->Point2.X + dx,
line->Point2.Y + dy, line->Thickness);
}
END_LOOP;
PIN_LOOP (Src);
{
CreateNewPin (Dest, pin->X + dx, pin->Y + dy, pin->Thickness,
pin->Clearance, pin->Mask, pin->DrillingHole,
pin->Name, pin->Number, MaskFlags (pin->Flags, mask_flags));
}
END_LOOP;
PAD_LOOP (Src);
{
CreateNewPad (Dest, pad->Point1.X + dx, pad->Point1.Y + dy,
pad->Point2.X + dx, pad->Point2.Y + dy, pad->Thickness,
pad->Clearance, pad->Mask, pad->Name, pad->Number,
MaskFlags (pad->Flags, mask_flags));
}
END_LOOP;
ARC_LOOP (Src);
{
CreateNewArcInElement (Dest, arc->X + dx, arc->Y + dy, arc->Width,
arc->Height, arc->StartAngle, arc->Delta,
arc->Thickness);
}
END_LOOP;
for (i=0; i<Src->Attributes.Number; i++)
CreateNewAttribute (& Dest->Attributes,
Src->Attributes.List[i].name,
Src->Attributes.List[i].value);
Dest->MarkX = Src->MarkX + dx;
Dest->MarkY = Src->MarkY + dy;
SetElementBoundingBox (Data, Dest, &PCB->Font);
return (Dest);
}
static int
PrintBOM (void)
{
char utcTime[64];
Coord x, y;
double theta = 0.0;
double sumx, sumy;
int pinfound[MAXREFPINS];
double pinx[MAXREFPINS];
double piny[MAXREFPINS];
double pinangle[MAXREFPINS];
double padcentrex, padcentrey;
double centroidx, centroidy;
double pin1x, pin1y;
int pin_cnt;
int found_any_not_at_centroid;
int found_any;
time_t currenttime;
FILE *fp;
BomList *bom = NULL;
char *name, *descr, *value,*fixed_rotation;
int rpindex;
fp = fopen (xy_filename, "w");
if (!fp)
{
gui->log ("Cannot open file %s for writing\n", xy_filename);
return 1;
}
/* Create a portable timestamp. */
currenttime = time (NULL);
{
/* avoid gcc complaints */
const char *fmt = "%c UTC";
strftime (utcTime, sizeof (utcTime), fmt, gmtime (¤ttime));
}
fprintf (fp, "# PcbXY Version 1.0\n");
fprintf (fp, "# Date: %s\n", utcTime);
fprintf (fp, "# Author: %s\n", pcb_author ());
fprintf (fp, "# Title: %s - PCB X-Y\n", UNKNOWN (PCB->Name));
fprintf (fp, "# RefDes, Description, Value, X, Y, rotation, top/bottom\n");
/* don't use localized xy_unit->in_suffix here since */
/* the line itself is not localized and not for GUI */
fprintf (fp, "# X,Y in %s. rotation in degrees.\n", xy_unit->suffix);
fprintf (fp, "# --------------------------------------------\n");
/*
* For each element we calculate the centroid of the footprint.
* In addition, we need to extract some notion of rotation.
* While here generate the BOM list
*/
ELEMENT_LOOP (PCB->Data);
{
/* Initialize our pin count and our totals for finding the centroid. */
pin_cnt = 0;
sumx = 0.0;
sumy = 0.0;
for (rpindex = 0; rpindex < MAXREFPINS; rpindex++)
pinfound[rpindex] = 0;
/* Insert this component into the bill of materials list. */
bom = bom_insert ((char *)UNKNOWN (NAMEONPCB_NAME (element)),
(char *)UNKNOWN (DESCRIPTION_NAME (element)),
(char *)UNKNOWN (VALUE_NAME (element)), bom);
/*
* Iterate over the pins and pads keeping a running count of how
* many pins/pads total and the sum of x and y coordinates
*
* While we're at it, store the location of pin/pad #1 and #2 if
* we can find them.
*/
PIN_LOOP (element);
{
sumx += (double) pin->X;
sumy += (double) pin->Y;
pin_cnt++;
for (rpindex = 0; reference_pin_names[rpindex]; rpindex++)
{
if (NSTRCMP (pin->Number, reference_pin_names[rpindex]) == 0)
{
pinx[rpindex] = (double) pin->X;
piny[rpindex] = (double) pin->Y;
pinangle[rpindex] = 0.0; /* pins have no notion of angle */
pinfound[rpindex] = 1;
}
}
}
END_LOOP;
PAD_LOOP (element);
{
sumx += (pad->Point1.X + pad->Point2.X) / 2.0;
sumy += (pad->Point1.Y + pad->Point2.Y) / 2.0;
pin_cnt++;
for (rpindex = 0; reference_pin_names[rpindex]; rpindex++)
{
if (NSTRCMP (pad->Number, reference_pin_names[rpindex]) == 0)
{
padcentrex = (double) (pad->Point1.X + pad->Point2.X) / 2.0;
padcentrey = (double) (pad->Point1.Y + pad->Point2.Y) / 2.0;
pinx[rpindex] = padcentrex;
piny[rpindex] = padcentrey;
/*
* NOTE: We swap the Y points because in PCB, the Y-axis
* is inverted. Increasing Y moves down. We want to deal
* in the usual increasing Y moves up coordinates though.
*/
pinangle[rpindex] = (180.0 / M_PI) * atan2 (pad->Point1.Y - pad->Point2.Y,
pad->Point2.X - pad->Point1.X);
pinfound[rpindex]=1;
}
}
}
END_LOOP;
if (pin_cnt > 0)
{
centroidx = sumx / (double) pin_cnt;
centroidy = sumy / (double) pin_cnt;
if (NSTRCMP( AttributeGetFromList (&element->Attributes,"xy-centre"), "origin") == 0 )
{
x = element->MarkX;
y = element->MarkY;
}
else
{
x = centroidx;
y = centroidy;
}
fixed_rotation = AttributeGetFromList (&element->Attributes, "xy-fixed-rotation");
if (fixed_rotation)
{
/* The user specified a fixed rotation */
theta = atof (fixed_rotation);
found_any_not_at_centroid = 1;
found_any = 1;
}
else
{
/* Find first reference pin not at the centroid */
found_any_not_at_centroid = 0;
found_any = 0;
theta = 0.0;
for (rpindex = 0;
reference_pin_names[rpindex] && !found_any_not_at_centroid;
rpindex++)
{
if (pinfound[rpindex])
{
found_any = 1;
/* Recenter pin "#1" onto the axis which cross at the part
centroid */
pin1x = pinx[rpindex] - x;
pin1y = piny[rpindex] - y;
/* flip x, to reverse rotation for elements on back */
if (FRONT (element) != 1)
pin1x = -pin1x;
/* if only 1 pin, use pin 1's angle */
if (pin_cnt == 1)
{
theta = pinangle[rpindex];
found_any_not_at_centroid = 1;
}
else if ((pin1x != 0.0) || (pin1y != 0.0))
{
theta = xyToAngle (pin1x, pin1y, pin_cnt > 2);
found_any_not_at_centroid = 1;
}
}
}
if (!found_any)
{
Message
("PrintBOM(): unable to figure out angle because I could\n"
" not find a suitable reference pin of element %s\n"
" Setting to %g degrees\n",
UNKNOWN (NAMEONPCB_NAME (element)), theta);
}
else if (!found_any_not_at_centroid)
{
Message
("PrintBOM(): unable to figure out angle of element\n"
" %s because the reference pin(s) are at the centroid of the part.\n"
" Setting to %g degrees\n",
UNKNOWN (NAMEONPCB_NAME (element)), theta);
}
}
name = CleanBOMString ((char *)UNKNOWN (NAMEONPCB_NAME (element)));
descr = CleanBOMString ((char *)UNKNOWN (DESCRIPTION_NAME (element)));
value = CleanBOMString ((char *)UNKNOWN (VALUE_NAME (element)));
y = PCB->MaxHeight - y;
pcb_fprintf (fp, "%m+%s,\"%s\",\"%s\",%.2mS,%.2mS,%g,%s\n",
xy_unit->allow, name, descr, value, x, y,
theta, FRONT (element) == 1 ? "top" : "bottom");
free (name);
free (descr);
free (value);
}
}
END_LOOP;
fclose (fp);
/* Now print out a Bill of Materials file */
fp = fopen (bom_filename, "w");
if (!fp)
{
gui->log ("Cannot open file %s for writing\n", bom_filename);
print_and_free (NULL, bom);
return 1;
}
fprintf (fp, "# PcbBOM Version 1.0\n");
fprintf (fp, "# Date: %s\n", utcTime);
fprintf (fp, "# Author: %s\n", pcb_author ());
fprintf (fp, "# Title: %s - PCB BOM\n", UNKNOWN (PCB->Name));
fprintf (fp, "# Quantity, Description, Value, RefDes\n");
fprintf (fp, "# --------------------------------------------\n");
print_and_free (fp, bom);
fclose (fp);
return (0);
}
bool
vendorIsElementMappable (ElementType *element)
{
int i;
int noskip;
if (vendorMapEnable == false)
return false;
noskip = 1;
for (i = 0; i < n_refdes; i++)
{
if ((NSTRCMP (UNKNOWN (NAMEONPCB_NAME (element)), ignore_refdes[i]) ==
0)
|| rematch (ignore_refdes[i], UNKNOWN (NAMEONPCB_NAME (element))))
{
Message (_
("Vendor mapping skipped because refdes = %s matches %s\n"),
UNKNOWN (NAMEONPCB_NAME (element)), ignore_refdes[i]);
noskip = 0;
}
}
if (noskip)
for (i = 0; i < n_value; i++)
{
if ((NSTRCMP (UNKNOWN (VALUE_NAME (element)), ignore_value[i]) == 0)
|| rematch (ignore_value[i], UNKNOWN (VALUE_NAME (element))))
{
Message (_
("Vendor mapping skipped because value = %s matches %s\n"),
UNKNOWN (VALUE_NAME (element)), ignore_value[i]);
noskip = 0;
}
}
if (noskip)
for (i = 0; i < n_descr; i++)
{
if ((NSTRCMP (UNKNOWN (DESCRIPTION_NAME (element)), ignore_descr[i])
== 0)
|| rematch (ignore_descr[i],
UNKNOWN (DESCRIPTION_NAME (element))))
{
Message (_
("Vendor mapping skipped because descr = %s matches %s\n"),
UNKNOWN (DESCRIPTION_NAME (element)), ignore_descr[i]);
noskip = 0;
}
}
if (noskip && TEST_FLAG (LOCKFLAG, element))
{
Message (_("Vendor mapping skipped because element %s is locked\n"),
UNKNOWN (NAMEONPCB_NAME (element)));
noskip = 0;
}
if (noskip)
return true;
else
return false;
}
static void
apply_vendor_map (void)
{
int i;
int changed, tot;
bool state;
state = vendorMapEnable;
/* enable mapping */
vendorMapEnable = true;
/* reset our counts */
changed = 0;
tot = 0;
/* If we have loaded vendor drills, then apply them to the design */
if (n_vendor_drills > 0)
{
/* first all the vias */
VIA_LOOP (PCB->Data);
{
tot++;
if (via->DrillingHole != vendorDrillMap (via->DrillingHole))
{
/* only change unlocked vias */
if (!TEST_FLAG (LOCKFLAG, via))
{
if (ChangeObject2ndSize (VIA_TYPE, via, NULL, NULL,
vendorDrillMap (via->DrillingHole),
true, false))
changed++;
else
{
Message (_
("Via at %.2f, %.2f not changed. Possible reasons:\n"
"\t- pad size too small\n"
"\t- new size would be too large or too small\n"),
0.01 * via->X, 0.01 * via->Y);
}
}
else
{
Message (_("Locked via at %.2f, %.2f not changed.\n"),
0.01 * via->X, 0.01 * via->Y);
}
}
}
END_LOOP;
/* and now the pins */
ELEMENT_LOOP (PCB->Data);
{
/*
* first figure out if this element should be skipped for some
* reason
*/
if (vendorIsElementMappable (element))
{
/* the element is ok to modify, so iterate over its pins */
PIN_LOOP (element);
{
tot++;
if (pin->DrillingHole != vendorDrillMap (pin->DrillingHole))
{
if (!TEST_FLAG (LOCKFLAG, pin))
{
if (ChangeObject2ndSize (PIN_TYPE, element, pin, NULL,
vendorDrillMap (pin->
DrillingHole),
true, false))
changed++;
else
{
Message (_
("Pin %s (%s) at %.2f, %.2f (element %s, %s, %s) not changed.\n"
"\tPossible reasons:\n"
"\t- pad size too small\n"
"\t- new size would be too large or too small\n"),
UNKNOWN (pin->Number), UNKNOWN (pin->Name),
0.01 * pin->X, 0.01 * pin->Y,
UNKNOWN (NAMEONPCB_NAME (element)),
UNKNOWN (VALUE_NAME (element)),
UNKNOWN (DESCRIPTION_NAME (element)));
}
}
else
{
Message (_
("Locked pin at %-6.2f, %-6.2f not changed.\n"),
0.01 * pin->X, 0.01 * pin->Y);
}
}
}
END_LOOP;
}
}
END_LOOP;
Message (_("Updated %d drill sizes out of %d total\n"), changed, tot);
/* Update the current Via */
if (Settings.ViaDrillingHole !=
vendorDrillMap (Settings.ViaDrillingHole))
{
changed++;
Settings.ViaDrillingHole =
vendorDrillMap (Settings.ViaDrillingHole);
Message (_("Adjusted active via hole size to be %6.2f mils\n"),
0.01 * Settings.ViaDrillingHole);
}
/* and update the vias for the various routing styles */
for (i = 0; i < NUM_STYLES; i++)
{
if (PCB->RouteStyle[i].Hole !=
vendorDrillMap (PCB->RouteStyle[i].Hole))
{
changed++;
PCB->RouteStyle[i].Hole =
vendorDrillMap (PCB->RouteStyle[i].Hole);
Message (_
("Adjusted %s routing style via hole size to be %6.2f mils\n"),
PCB->RouteStyle[i].Name,
0.01 * PCB->RouteStyle[i].Hole);
if (PCB->RouteStyle[i].Diameter <
PCB->RouteStyle[i].Hole + MIN_PINORVIACOPPER)
{
PCB->RouteStyle[i].Diameter =
PCB->RouteStyle[i].Hole + MIN_PINORVIACOPPER;
Message (_
("Increased %s routing style via diameter to %6.2f mils\n"),
PCB->RouteStyle[i].Name,
0.01 * PCB->RouteStyle[i].Diameter);
}
}
}
/*
* if we've changed anything, indicate that we need to save the
* file, redraw things, and make sure we can undo.
*/
if (changed)
{
SetChangedFlag (true);
Redraw ();
IncrementUndoSerialNumber ();
}
}
/* restore mapping on/off */
vendorMapEnable = state;
}
static int
PrintBOM (void)
{
char utcTime[64];
Coord x, y;
double theta = 0.0;
double sumx, sumy;
double pin1x = 0.0, pin1y = 0.0, pin1angle = 0.0;
double pin2x = 0.0, pin2y = 0.0;
int found_pin1;
int found_pin2;
int pin_cnt;
time_t currenttime;
FILE *fp;
BomList *bom = NULL;
char *name, *descr, *value;
fp = fopen (xy_filename, "w");
if (!fp)
{
gui->log ("Cannot open file %s for writing\n", xy_filename);
return 1;
}
/* Create a portable timestamp. */
currenttime = time (NULL);
{
/* avoid gcc complaints */
const char *fmt = "%c UTC";
strftime (utcTime, sizeof (utcTime), fmt, gmtime (¤ttime));
}
fprintf (fp, "# PcbXY Version 1.0\n");
fprintf (fp, "# Date: %s\n", utcTime);
fprintf (fp, "# Author: %s\n", pcb_author ());
fprintf (fp, "# Title: %s - PCB X-Y\n", UNKNOWN (PCB->Name));
fprintf (fp, "# RefDes, Description, Value, X, Y, rotation, top/bottom\n");
fprintf (fp, "# X,Y in %s. rotation in degrees.\n", xy_unit->in_suffix);
fprintf (fp, "# --------------------------------------------\n");
/*
* For each element we calculate the centroid of the footprint.
* In addition, we need to extract some notion of rotation.
* While here generate the BOM list
*/
ELEMENT_LOOP (PCB->Data);
{
/* initialize our pin count and our totals for finding the
centriod */
pin_cnt = 0;
sumx = 0.0;
sumy = 0.0;
found_pin1 = 0;
found_pin2 = 0;
/* insert this component into the bill of materials list */
bom = bom_insert ((char *)UNKNOWN (NAMEONPCB_NAME (element)),
(char *)UNKNOWN (DESCRIPTION_NAME (element)),
(char *)UNKNOWN (VALUE_NAME (element)), bom);
/*
* iterate over the pins and pads keeping a running count of how
* many pins/pads total and the sum of x and y coordinates
*
* While we're at it, store the location of pin/pad #1 and #2 if
* we can find them
*/
PIN_LOOP (element);
{
sumx += (double) pin->X;
sumy += (double) pin->Y;
pin_cnt++;
if (NSTRCMP (pin->Number, "1") == 0)
{
pin1x = (double) pin->X;
pin1y = (double) pin->Y;
pin1angle = 0.0; /* pins have no notion of angle */
found_pin1 = 1;
}
else if (NSTRCMP (pin->Number, "2") == 0)
{
pin2x = (double) pin->X;
pin2y = (double) pin->Y;
found_pin2 = 1;
}
}
END_LOOP;
PAD_LOOP (element);
{
sumx += (pad->Point1.X + pad->Point2.X) / 2.0;
sumy += (pad->Point1.Y + pad->Point2.Y) / 2.0;
pin_cnt++;
if (NSTRCMP (pad->Number, "1") == 0)
{
pin1x = (double) (pad->Point1.X + pad->Point2.X) / 2.0;
pin1y = (double) (pad->Point1.Y + pad->Point2.Y) / 2.0;
/*
* NOTE: We swap the Y points because in PCB, the Y-axis
* is inverted. Increasing Y moves down. We want to deal
* in the usual increasing Y moves up coordinates though.
*/
pin1angle = (180.0 / M_PI) * atan2 (pad->Point1.Y - pad->Point2.Y,
pad->Point2.X - pad->Point1.X);
found_pin1 = 1;
}
else if (NSTRCMP (pad->Number, "2") == 0)
{
pin2x = (double) (pad->Point1.X + pad->Point2.X) / 2.0;
pin2y = (double) (pad->Point1.Y + pad->Point2.Y) / 2.0;
found_pin2 = 1;
}
}
END_LOOP;
if (pin_cnt > 0)
{
x = sumx / (double) pin_cnt;
y = sumy / (double) pin_cnt;
if (found_pin1)
{
/* recenter pin #1 onto the axis which cross at the part
centroid */
pin1x -= x;
pin1y -= y;
pin1y = -1.0 * pin1y;
/* if only 1 pin, use pin 1's angle */
if (pin_cnt == 1)
theta = pin1angle;
else
{
/* if pin #1 is at (0,0) use pin #2 for rotation */
if ((pin1x == 0.0) && (pin1y == 0.0))
{
if (found_pin2)
theta = xyToAngle (pin2x, pin2y);
else
{
Message
("PrintBOM(): unable to figure out angle of element\n"
" %s because pin #1 is at the centroid of the part.\n"
" and I could not find pin #2's location\n"
" Setting to %g degrees\n",
UNKNOWN (NAMEONPCB_NAME (element)), theta);
}
}
else
theta = xyToAngle (pin1x, pin1y);
}
}
/* we did not find pin #1 */
else
{
theta = 0.0;
Message
("PrintBOM(): unable to figure out angle because I could\n"
" not find pin #1 of element %s\n"
" Setting to %g degrees\n",
UNKNOWN (NAMEONPCB_NAME (element)), theta);
}
name = CleanBOMString ((char *)UNKNOWN (NAMEONPCB_NAME (element)));
descr = CleanBOMString ((char *)UNKNOWN (DESCRIPTION_NAME (element)));
value = CleanBOMString ((char *)UNKNOWN (VALUE_NAME (element)));
y = PCB->MaxHeight - y;
pcb_fprintf (fp, "%m+%s,\"%s\",\"%s\",%mS,%.2mS,%g,%s\n",
xy_unit->allow, name, descr, value, x, y,
theta, FRONT (element) == 1 ? "top" : "bottom");
free (name);
free (descr);
free (value);
}
}
END_LOOP;
fclose (fp);
/* Now print out a Bill of Materials file */
fp = fopen (bom_filename, "w");
if (!fp)
{
gui->log ("Cannot open file %s for writing\n", bom_filename);
print_and_free (NULL, bom);
return 1;
}
fprintf (fp, "# PcbBOM Version 1.0\n");
fprintf (fp, "# Date: %s\n", utcTime);
fprintf (fp, "# Author: %s\n", pcb_author ());
fprintf (fp, "# Title: %s - PCB BOM\n", UNKNOWN (PCB->Name));
fprintf (fp, "# Quantity, Description, Value, RefDes\n");
fprintf (fp, "# --------------------------------------------\n");
print_and_free (fp, bom);
fclose (fp);
return (0);
}