コード例 #1
0
ファイル: sys_sun.c プロジェクト: Blzut3/Engoo
int main (int argc, char **argv)
{
    static quakeparms_t    parms;
    float time, oldtime, newtime;

    parms.memsize = 16*1024*1024;
    parms.membase = malloc (parms.memsize);
    parms.basedir = ".";
    parms.cachedir = NULL;

    COM_InitArgv (argc, argv);

    parms.argc = com_argc;
    parms.argv = com_argv;

    printf ("Host_Init\n");
    Host_Init (&parms);

	Sys_Init();

    // unroll the simulation loop to give the video side a chance to see _vid_default_mode
    Host_Frame( 0.1 );
    VID_SetDefaultMode();

    oldtime = Sys_FloatTime();
    while (1)
    {
		newtime = Sys_FloatTime();
		Host_Frame (newtime - oldtime);
		oldtime = newtime;
    }
	return 0;
}
コード例 #2
0
ファイル: sys.c プロジェクト: SOLARIC/world-opponent-network
int Sys_InitGame() {

   //Four args, three unused, and one I don't care to use.
   //char * gamedir[0x100];



   //gmodinfo might need zeroing out on server restarts and whatnot, but for the
   //first server, there ought to be no troubles.

   //Tracing sucks.
   SeedRandomNumberGenerator();

   Sys_InitMemory();

   if(Host_Init(&host_parms) == 0) { //failed.
      return(0);
   }

   Sys_Init(); //be after host_init, as cvars need memory.

   //COM_GetGameDirSize(gamedir, sizeof(gamedir));
   //Sys_InitAuthentication

   Host_InitializeGameDLL();
   Banlist_Init();
   NET_Config(1);

   return(1);
}
コード例 #3
0
ファイル: sv_sys_win.c プロジェクト: jogi1/camquake
/*
==================
main

==================
*/
int main (int argc, char **argv)
{
	double			newtime, time, oldtime;
	int				sleep_msec;

	Host_Init (argc, argv, 16*1024*1024);

//
// main loop
//
	oldtime = Sys_DoubleTime () - 0.1;
	while (1)
	{
		sleep_msec = sys_sleep.value;
		if (sleep_msec > 0)
		{
			if (sleep_msec > 13)
				sleep_msec = 13;
			Sleep (sleep_msec);
		}

		NET_Sleep (1);

	// find time passed since last cycle
		newtime = Sys_DoubleTime ();
		time = newtime - oldtime;
		oldtime = newtime;
		
		Host_Frame (time);				
	}	

	return true;
}
コード例 #4
0
void main (int argc, char **argv)
{
    static quakeparms_t    parms;

    parms.memsize = MEMSZ;
    parms.membase = mem;
    parms.basedir = "/amnt1";

    if(0 == parms.membase)
    {
        printf("out of mem\n");
        exit(1);
    }

    COM_InitArgv (argc, argv);

    parms.argc = com_argc;
    parms.argv = com_argv;

    printf ("Host_Init\n");
    Host_Init (&parms);
    while (1)
    {
        Host_Frame (0.1);
    }
}
コード例 #5
0
ファイル: demo15_sys_sdl.c プロジェクト: alexmac/AdobeMAX2013
int main (int c, char **v)
{
	quakeparms_t parms;
	
	enableCrunLoop = c > 0;

//	signal(SIGFPE, floating_point_exception_handler);
	signal(SIGFPE, SIG_IGN);

	parms.memsize = 16*1024*1024;
	parms.membase = malloc (parms.memsize);
	parms.basedir = basedir;
	parms.cachedir = cachedir;

	COM_InitArgv(c, v);
	parms.argc = com_argc;
	parms.argv = com_argv;

	Sys_Init();

    Host_Init(&parms);

	Cvar_RegisterVariable (&sys_nostdout);

    oldtime = Sys_FloatTime () - 0.1;

    if(enableCrunLoop) {
    	while(true) {
    		engineTick();
    	}
    } else {
    	AS3_GoAsync();	
    }
}
コード例 #6
0
ファイル: usbhost_main.c プロジェクト: DragonWar/RSL
int main()
{
    int32_t  rc;
    uint32_t  numBlks, blkSize;
    uint8_t  inquiryResult[INQUIRY_LENGTH];

    /* SystemClockUpdate() updates the SystemFrequency variable */
    SystemClockUpdate();

    UART_Init(57600);          /* Initialize the serial port to view the log messages                       */
    Host_Init();               /* Initialize the lpc17xx host controller                                    */
    rc = Host_EnumDev();       /* Enumerate the device connected                                            */
    if (rc == OK) {
		/* Initialize the mass storage and scsi interfaces */
        rc = MS_Init( &blkSize, &numBlks, inquiryResult );
        if (rc == OK) {
            rc = FAT_Init();   /* Initialize the FAT16 file system                                          */
            if (rc == OK) {
                Main_Copy();   /* Call the application                                                      */
            } else {
                return (0);
            }
        } else {
            return (0);
        }
    } else {							
        return (0);
    }
    while(1);
}
コード例 #7
0
ファイル: main.c プロジェクト: cgha/lpc1768-sd-usb-msc
/*******************************************************************************
* Function Name  : main
* Description    : Main program
* Input          : None
* Output         : None
* Return         : None
* Attention		 : None
*******************************************************************************/
int main (void) {
	uint32_t n;
	uint32_t ret;

	SysTick_Config(SystemCoreClock / 1000);
	#ifdef CFG_SDCARD
  	/* Setup SD Card/FATFS */
  	SDInit();
	#endif
	debug_frmwrk_init();
	printf("\r\n hello");
	//for (n = 0; n < MSC_ImageSize; n++) {     /* Copy Initial Disk Image */
	//	Memory[n] = DiskImage[n];             /* from Flash to RAM */
	//}
	
	if(!KEY1_PIN)
	{
		UsbMode = 0;
		while(!KEY1_PIN);
		delay(100000);
		while(!KEY1_PIN);
		
	}
	if(UsbMode == 0){
		USB_Init();                               /* USB Initialization */
		USB_Connect(TRUE);                        /* USB Connect */
	}
	else{
		
	
	    Host_Init();               // Initialize the lpc17xx host controller                                    
	
		if( Host_EnumDev() == 0 )	/* Enumerate the device connected                                            */
	    {
		  printf("-- USB device detected OK \r\n");
	    }
	    else
	    {
	      printf("-- Please connect a USB device \r\n");
	      while( Host_EnumDev() == 0 );
	      printf("-- USB device connection detected \r\n");
		  Delay(0x00ffff);
	    }
	}

	while (1){
		if(!KEY1_PIN)
		{
			ret = Host_CtrlSend(0x40, 0x50, 0, 0, 0, NULL);
			printf("\r\n sent switch cmd,ret= %x ",ret);
			delay(100);
			NVIC_SystemReset();
		}
	}
}
コード例 #8
0
int main (int argc, char **argv)
{
    MSG        msg;
	quakeparms_t	parms;
	double			time, oldtime;
	static	char	cwd[1024];

	memset (&parms, 0, sizeof(parms));

	parms.memsize = 16384*1024;
	parms.membase = malloc (parms.memsize);

	_getcwd (cwd, sizeof(cwd));
	if (cwd[Q_strlen(cwd)-1] == '\\')
		cwd[Q_strlen(cwd)-1] = 0;
	parms.basedir = cwd; //"f:/quake";
//	parms.basedir = "f:\\quake";

	COM_InitArgv (argc, argv);

	// dedicated server ONLY!
	if (!COM_CheckParm ("-dedicated"))
	{
		memcpy (newargv, argv, argc*4);
		newargv[argc] = "-dedicated";
		argc++;
		argv = newargv;
		COM_InitArgv (argc, argv);
	}

	parms.argc = argc;
	parms.argv = argv;

	printf ("Host_Init\n");
	Host_Init (&parms);

	oldtime = Sys_FloatTime ();

    /* main window message loop */
	while (1)
	{
		time = Sys_FloatTime();
		if (time - oldtime < sys_ticrate.value )
		{
			Sleep(1);
			continue;
		}

		Host_Frame ( time - oldtime );
		oldtime = time;
	}

    /* return success of application */
    return TRUE;
}
コード例 #9
0
ファイル: sys_linux.c プロジェクト: DaneTheory/quake
int main (int c, char **v)
{

	double		time, oldtime, newtime;
	quakeparms_t parms;
	int j;

//	static char cwd[1024];

//	signal(SIGFPE, floating_point_exception_handler);
	signal(SIGFPE, SIG_IGN);

	memset(&parms, 0, sizeof(parms));

	COM_InitArgv(c, v);
	parms.argc = com_argc;
	parms.argv = com_argv;

	parms.memsize = 16*1024*1024;

	j = COM_CheckParm("-mem");
	if (j)
		parms.memsize = (int) (Q_atof(com_argv[j+1]) * 1024 * 1024);
	parms.membase = malloc (parms.memsize);

	parms.basedir = basedir;
// caching is disabled by default, use -cachedir to enable
//	parms.cachedir = cachedir;

	noconinput = COM_CheckParm("-noconinput");
	if (!noconinput)
		fcntl(0, F_SETFL, fcntl (0, F_GETFL, 0) | FNDELAY);

	if (COM_CheckParm("-nostdout"))
		nostdout = 1;

	Sys_Init();

    Host_Init(&parms);

    oldtime = Sys_DoubleTime ();
    while (1)
    {
// find time spent rendering last frame
        newtime = Sys_DoubleTime ();
        time = newtime - oldtime;

		Host_Frame(time);
		oldtime = newtime;
    }

}
コード例 #10
0
ファイル: sv_sys_win.c プロジェクト: deurk/mvdsv
int main(int ac, char *av[])
{
	double			newtime, time, oldtime;
	int				sleep_msec;

	ParseCommandLine (ac, av);

	COM_InitArgv (argc, argv);

	GetConsoleTitle(title, sizeof(title));

	Host_Init(argc, argv, DEFAULT_MEM_SIZE);

	// run one frame immediately for first heartbeat
	SV_Frame (0.1);

	//
	// main loop
	//
	oldtime = Sys_DoubleTime () - 0.1;

	while (1)
	{
		sleep_msec = (int)sys_sleep.value;
		if (sleep_msec > 0)
		{
			if (sleep_msec > 13)
				sleep_msec = 13;
			Sleep (sleep_msec);
		}

		// select on the net socket and stdin
		// the only reason we have a timeout at all is so that if the last
		// connected client times out, the message would not otherwise
		// be printed until the next event.
		if (!sys_simulation.value) {
			NET_Sleep((int)sys_select_timeout.value / 1000, false);
		}

		// find time passed since last cycle
		newtime = Sys_DoubleTime ();
		time = newtime - oldtime;
		oldtime = newtime;

		curtime = newtime;
		SV_Frame (time);
	}

	return true;
}
コード例 #11
0
ファイル: usbhost_main.c プロジェクト: tongjingyu/nxp-os
/*********************************************************************//**
 * @brief 			This function is the main function where the execution begins
 * @param[in]		None
 * @return 		    None
 **********************************************************************/
int main()
{
    int32_t  rc;
    uint32_t  numBlks, blkSize;	
		uint8_t buffer[30];
		UINT nun;
    uint8_t  inquiryResult[INQUIRY_LENGTH];
		FATFS fs;
	   FIL fsrc, fdst;
  
		const TCHAR  a=1;
  
		  SystemInit();
	  debug_frmwrk_init();
			print_menu();
		
    Host_Init();               /* Initialize the lpc17xx host controller                                    */

    PRINT_Log("Host Initialized\r\n");
    PRINT_Log("Connect a Mass Storage device\r\n");
    rc = Host_EnumDev();       /* Enumerate the device connected                                            */
		 PRINT_Log("Á¬½ÓÉ豸\r\n");
    if ((rc == USB_HOST_FUNC_OK) && (Host_GetDeviceType() == MASS_STORAGE_DEVICE))
			{
					
					PRINT_Log("Mass Storage device connected\r\n");

				rc = 	f_mount(&fs,"0:",1);  
				if(rc==0)
				{
					  rc = f_open(&fdst, "0:read.txt", FA_READ);
					if(rc==0)
					{
						PRINT_Log("open ok\r\n");
						f_read (&fdst,   buffer, 30, &nun );
						PRINT_Log(buffer);
						f_close(&fdst);
					}
				}
    
    } 
		else {
	    PRINT_Log("Not a Mass Storage device\n");							
        return (0);
    }


   return 0;
}
コード例 #12
0
ファイル: sys_linux.cpp プロジェクト: luaman/zq
int			 main (int argc, char **argv)
{
	double	 time, oldtime, newtime;

#ifdef PARANOID
	signal(SIGFPE, floating_point_exception_handler);
#else
	signal(SIGFPE, SIG_IGN);
#endif

#ifdef hpux
	// makes it possible to access unaligned pointers (e.g. inside structures)
	//   must be linked with libhpp.a to work (add -lhppa to LDFLAGS)
	allow_unaligned_data_access();
#endif

	// we need to check for -noconinput and -nostdout
	// before Host_Init is called
	COM_InitArgv (argc, argv);

	noconinput = COM_CheckParm("-noconinput");
	if (!noconinput)
		fcntl(0, F_SETFL, fcntl (0, F_GETFL, 0) | O_NDELAY);

	if (COM_CheckParm("-nostdout"))
		nostdout = 1;

#if id386
	Sys_SetFPCW();
#endif

	Host_Init (argc, argv, 32*1024*1024);

	oldtime = Sys_DoubleTime ();
	while (1)
	{
		if (dedicated)
			NET_Sleep (10);

		// find time spent rendering last frame
		newtime = Sys_DoubleTime ();
		time = newtime - oldtime;

		Host_Frame(time);
		oldtime = newtime;
	}
    return 0;
}
コード例 #13
0
ファイル: sys_wii.c プロジェクト: classicQ/classicQ.github.io
static int main_real()
{
	printf("Mounting drive\n");

	{
		FATFS fso;
		FIL myfile;
		int r;

		memset(&fso, 0, sizeof(fso));
		memset(&myfile, 0, sizeof(myfile));

		r = f_mount(0, &fso);

		if (r == 0)
			printf("Succeeded\n");
		else
			printf("Failed\n");
	}

	{
	double mytime, oldtime, newtime;
	char *myargv[] = { "fodquake", 0 };

	printf("Calling Host_Init()\n");

#if 0
	cl.frames = malloc(sizeof(*cl.frames)*UPDATE_BACKUP);
	memset(cl.frames, 0, sizeof(*cl.frames)*UPDATE_BACKUP);
#endif
	Host_Init(1, myargv, 10*1024*1024);

	oldtime = Sys_DoubleTime();
	while(1)
	{
		newtime = Sys_DoubleTime();
		mytime = newtime - oldtime;
		oldtime = newtime;

		Host_Frame(mytime);
	}

	Sys_Error("End of app");

	return 0;
	}
}
コード例 #14
0
void AndroidInit(int width, int height)
{
	quakeparms_t parms;
	int j;
	int c = 0;
	char* v[] = {"quake", (char*) 0};
	
	scr_width = width;
	scr_height = height;

//	static char cwd[1024];

//	signal(SIGFPE, floating_point_exception_handler);
//  signal(SIGFPE, SIG_IGN);

	memset(&parms, 0, sizeof(parms));

	COM_InitArgv(c, v);
	parms.argc = com_argc;
	parms.argv = com_argv;

	parms.memsize = 16*1024*1024;

	j = COM_CheckParm("-mem");
	if (j)
		parms.memsize = (int) (Q_atof(com_argv[j+1]) * 1024 * 1024);
	parms.membase = malloc (parms.memsize);

	parms.basedir = basedir;
// caching is disabled by default, use -cachedir to enable
//	parms.cachedir = cachedir;

#if 0 // FNDELAY not implemented
	noconinput = COM_CheckParm("-noconinput");
	if (!noconinput)
		fcntl(0, F_SETFL, fcntl (0, F_GETFL, 0) | FNDELAY);
#endif

	if (COM_CheckParm("-nostdout"))
		nostdout = 1;

	Sys_Init();

    Host_Init(&parms);

    g_oldtime = Sys_DoubleTime ();
}
コード例 #15
0
ファイル: sys_ps2.c プロジェクト: joshdekock/jim-ps2ware
int main (int argc, char **argv)
{
	static quakeparms_t    parms;
	float  time, oldtime, newtime;

	signal(SIGFPE, SIG_IGN);
	SifInitRpc(0);
	LoadModules();
/*
	if(mcInit(MC_TYPE_MC) < 0) 
	{
		printf("Failed to initialise memcard\n");
		SleepThread();
	}
*/
	inithandle();
	
	parms.memsize = 24*1024*1024;
	parms.membase = malloc (parms.memsize);
	parms.basedir = ".";

	COM_InitArgv (argc, argv);

	parms.argc = com_argc;
	parms.argv = com_argv;

	printf ("Host_Init\n");
	Host_Init (&parms);
	
	start_ps2_timer();
	
	oldtime = Sys_FloatTime () - 0.1;
    while (1)
    {
// find time spent rendering last frame
        newtime = Sys_FloatTime ();
        time = newtime - oldtime;

		oldtime = newtime;

        Host_Frame (time);
    }
	stop_ps2_timer();
	
	return 0;
}
コード例 #16
0
ファイル: cl_sys_sdl.c プロジェクト: luaman/qforge-newtree
/*
	main
*/
int
SDL_main (int c, char **v)
{
	double      time, oldtime, newtime;
	int         j;

#ifndef WIN32
	signal (SIGFPE, SIG_IGN);
#endif

	memset (&host_parms, 0, sizeof (host_parms));

	COM_InitArgv (c, v);
	host_parms.argc = com_argc;
	host_parms.argv = com_argv;

	host_parms.memsize = 16 * 1024 * 1024;  // 16MB default heap

	j = COM_CheckParm ("-mem");
	if (j)
		host_parms.memsize = (int) (atof (com_argv[j + 1]) * 1024 * 1024);
	host_parms.membase = malloc (host_parms.memsize);

	if (!host_parms.membase) {
		printf ("Can't allocate memory for zone.\n");
		return 1;
	}

#ifndef WIN32
	noconinput = COM_CheckParm ("-noconinput");
	if (!noconinput)
		fcntl (0, F_SETFL, fcntl (0, F_GETFL, 0) | O_NONBLOCK);
#endif

	Host_Init ();

	oldtime = Sys_DoubleTime ();
	while (1) {
		// find time spent rendering last frame
		newtime = Sys_DoubleTime ();
		time = newtime - oldtime;

		Host_Frame (time);
		oldtime = newtime;
	}
}
コード例 #17
0
ファイル: sys_null.c プロジェクト: luaman/zq
int main (int argc, char **argv)
{
#ifdef hpux
	// makes it possible to access unaligned pointers (e.g. inside structures)
	//   must be linked with libhpp.a to work (add -lhppa to LDFLAGS)
	allow_unaligned_data_access();
#endif

	printf ("Host_Init\n");
	Host_Init (argc, argv, 5861376);
	while (1)
	{
		Host_Frame (0.1);
	}

	return 0;
}
コード例 #18
0
void SchlierenRenderer::init()
{
  _initialized=true;
  // create pbo
  //    createPBO(&pbo_dest,_params.width, _params.height);
  //
  //    // create texture for blitting onto the screen
  //    createTexture(&tex_screen, _params.width, _params.height);
  //
  //    // create a depth buffer for offscreen rendering
  //    createDepthBuffer(&depth_buffer, _params.width, _params.height);
  //
  //    // create a framebuffer for offscreen rendering
  //    createFramebuffer(&framebuffer, tex_screen, depth_buffer);

  Host_Init(&_params);

}
コード例 #19
0
ファイル: diskio.c プロジェクト: doukkalitaouquane/Projets
DSTATUS disk_initialize(BYTE drv /* Physical drive nmuber (0..) */
)
{
	DSTATUS stat;
	int result;

	(void) result;

	switch (drv)
	{
	case ATA:
		// result = ATA_disk_initialize();
		stat = STA_NOINIT;
		// translate the result code here
		return stat;

	case MMC:
		stat = MMC_disk_initialize();
		return stat;

	case USB:
#if WITH_USB_MS
		/* USB host init and enumeration */
		if ( usb_status & STA_NOINIT ) {
			Host_Init();
			if ( Host_EnumDev() == OK ) {
				/* mass-storage init */
				if ( MS_Init(&blkSize, &numBlks, inquiryResult) == OK ) {
					usb_status &= ~STA_NOINIT;
				} else {
					/* MS init fail */
				}
			} else {
				/* host init and/or enum fail */
			}
		}
		return usb_status;
#else
		stat = STA_NOINIT;
		return stat;
#endif
	}
	return STA_NOINIT;
}
コード例 #20
0
ファイル: sys_ctr.c プロジェクト: masterfeizz/ctrQuake
int main (int argc, char **argv)
{
	float		time, oldtime;

	APT_CheckNew3DS(&isN3DS);
	if(isN3DS)
		osSetSpeedupEnable(true);

	gfxInit(GSP_RGB565_OES,GSP_RGB565_OES,false);
	gfxSetDoubleBuffering(GFX_TOP, false);
	gfxSetDoubleBuffering(GFX_BOTTOM, false);
	gfxSet3D(true);
	consoleInit(GFX_BOTTOM, NULL);

	#ifdef _3DS_CIA
		if(chdir("sdmc:/3ds/ctrQuake") != 0)
			Sys_Error("Could not find folder: sdmc:/3ds/ctrQuake");
	#endif

	static quakeparms_t    parms;

	parms.memsize = 24*1024*1024;
	parms.membase = malloc (parms.memsize);
	parms.basedir = ".";

	COM_InitArgv (argc, argv);

	parms.argc = com_argc;
	parms.argv = com_argv;
	Host_Init (&parms);
	
	Sys_Init();

	oldtime = Sys_FloatTime() -0.1;
	while (aptMainLoop())
	{
		time = Sys_FloatTime();
		separation_distance = osGet3DSliderState();
		Host_Frame (time - oldtime);
		oldtime = time;
	}
	gfxExit();
	return 0;
}
コード例 #21
0
void main (int argc, char **argv)
{
	static quakeparms_t    parms;

	parms.memsize = 8*1024*1024;
	parms.membase = malloc (parms.memsize);
	parms.basedir = ".";

	COM_InitArgv (argc, argv);

	parms.argc = com_argc;
	parms.argv = com_argv;

	printf ("Host_Init\n");
	Host_Init (&parms);
	while (1)
	{
		Host_Frame (0.1);
	}
}
コード例 #22
0
ファイル: sv_sys_unix.c プロジェクト: Classic-Fortress/server
/*
=============
main
=============
*/
int main (int argc, char *argv[])
{
	double time1, oldtime, newtime;

// Without signal(SIGPIPE, SIG_IGN); MVDSV crashes on *nix when qtvproxy will be disconnect.
	signal(SIGPIPE, SIG_IGN);

	COM_InitArgv (argc, argv);
	SV_System_Init(); // daemonize and so...
	Host_Init(argc, argv, DEFAULT_MEM_SIZE);

	// run one frame immediately for first heartbeat
	SV_Frame (0.1);

	// main loop
	oldtime = Sys_DoubleTime () - 0.1;

	while (1)
	{
		// select on the net socket and stdin
		// the only reason we have a timeout at all is so that if the last
		// connected client times out, the message would not otherwise
		// be printed until the next event.
		stdin_ready = NET_Sleep ((int)sys_select_timeout.value / 1000, do_stdin);

		// find time passed since last cycle
		newtime = Sys_DoubleTime ();
		time1 = newtime - oldtime;
		oldtime = newtime;

		curtime = newtime;
		SV_Frame (time1);

		// extrasleep is just a way to generate a f****d up connection on purpose
		if ((int)sys_extrasleep.value)
			usleep ((unsigned long)sys_extrasleep.value);
	}

	return 0;
}
コード例 #23
0
ファイル: usbhost_main.c プロジェクト: Manish-cimcon/MCU
int main()
{
    USB_INT32S  rc;
	USB_INT32U  numBlks, blkSize;
	USB_INT08U  inquiryResult[INQUIRY_LENGTH];

// Code Red - if CMSIS 1.3 setup is being used, then SystemInit() routine
// will be called by startup code rather than in application's main()
#ifndef __USE_CMSIS
	SystemInit();                               /* initialize clocks */
#endif

 

    UART_Init(115200);         /* Initialize the serial port to view the log messages                       */
    Host_Init();               /* Initialize the lpc17xx host controller                                    */
    rc = Host_EnumDev();       /* Enumerate the device connected                                            */
    if (rc == OK) {
		/* Initialize the mass storage and scsi interfaces */
        rc = MS_Init( &blkSize, &numBlks, inquiryResult );
        if (rc == OK) {
            rc = FAT_Init();   /* Initialize the FAT16 file system                                          */
            if (rc == OK) {
                Main_Copy();   /* Call the application                                                      */
            } else {
				while ( 1 );
                return (0);
            }
        } else {
			while ( 1 );
            return (0);
        }
    } else {							
		while ( 1 );
        return (0);
    }
    while(1);
}
コード例 #24
0
ファイル: host.c プロジェクト: divVerent/darkplaces-travis
void Host_Main(void)
{
	double time1 = 0;
	double time2 = 0;
	double time3 = 0;
	double cl_timer = 0, sv_timer = 0;
	double clframetime, deltacleantime, olddirtytime, dirtytime;
	double wait;
	int pass1, pass2, pass3, i;
	char vabuf[1024];
	qboolean playing;

	Host_Init();

	realtime = 0;
	host_dirtytime = Sys_DirtyTime();
	for (;;)
	{
		if (setjmp(host_abortframe))
		{
			SCR_ClearLoadingScreen(false);
			continue;			// something bad happened, or the server disconnected
		}

		olddirtytime = host_dirtytime;
		dirtytime = Sys_DirtyTime();
		deltacleantime = dirtytime - olddirtytime;
		if (deltacleantime < 0)
		{
			// warn if it's significant
			if (deltacleantime < -0.01)
				Con_Printf("Host_Mingled: time stepped backwards (went from %f to %f, difference %f)\n", olddirtytime, dirtytime, deltacleantime);
			deltacleantime = 0;
		}
		else if (deltacleantime >= 1800)
		{
			Con_Printf("Host_Mingled: time stepped forward (went from %f to %f, difference %f)\n", olddirtytime, dirtytime, deltacleantime);
			deltacleantime = 0;
		}
		realtime += deltacleantime;
		host_dirtytime = dirtytime;

		cl_timer += deltacleantime;
		sv_timer += deltacleantime;

		if (!svs.threaded)
		{
			svs.perf_acc_realtime += deltacleantime;

			// Look for clients who have spawned
			playing = false;
			for (i = 0, host_client = svs.clients;i < svs.maxclients;i++, host_client++)
				if(host_client->begun)
					if(host_client->netconnection)
						playing = true;
			if(sv.time < 10)
			{
				// don't accumulate time for the first 10 seconds of a match
				// so things can settle
				svs.perf_acc_realtime = svs.perf_acc_sleeptime = svs.perf_acc_lost = svs.perf_acc_offset = svs.perf_acc_offset_squared = svs.perf_acc_offset_max = svs.perf_acc_offset_samples = 0;
			}
			else if(svs.perf_acc_realtime > 5)
			{
				svs.perf_cpuload = 1 - svs.perf_acc_sleeptime / svs.perf_acc_realtime;
				svs.perf_lost = svs.perf_acc_lost / svs.perf_acc_realtime;
				if(svs.perf_acc_offset_samples > 0)
				{
					svs.perf_offset_max = svs.perf_acc_offset_max;
					svs.perf_offset_avg = svs.perf_acc_offset / svs.perf_acc_offset_samples;
					svs.perf_offset_sdev = sqrt(svs.perf_acc_offset_squared / svs.perf_acc_offset_samples - svs.perf_offset_avg * svs.perf_offset_avg);
				}
				if(svs.perf_lost > 0 && developer_extra.integer)
					if(playing) // only complain if anyone is looking
						Con_DPrintf("Server can't keep up: %s\n", Host_TimingReport(vabuf, sizeof(vabuf)));
				svs.perf_acc_realtime = svs.perf_acc_sleeptime = svs.perf_acc_lost = svs.perf_acc_offset = svs.perf_acc_offset_squared = svs.perf_acc_offset_max = svs.perf_acc_offset_samples = 0;
			}
		}

		if (slowmo.value < 0.00001 && slowmo.value != 0)
			Cvar_SetValue("slowmo", 0);
		if (host_framerate.value < 0.00001 && host_framerate.value != 0)
			Cvar_SetValue("host_framerate", 0);

		// keep the random time dependent, but not when playing demos/benchmarking
		if(!*sv_random_seed.string && !cls.demoplayback)
			rand();

		// get new key events
		Key_EventQueue_Unblock();
		SndSys_SendKeyEvents();
		Sys_SendKeyEvents();

		NetConn_UpdateSockets();

		Log_DestBuffer_Flush();

		// receive packets on each main loop iteration, as the main loop may
		// be undersleeping due to select() detecting a new packet
		if (sv.active && !svs.threaded)
			NetConn_ServerFrame();

		Curl_Run();

		// check for commands typed to the host
		Host_GetConsoleCommands();

		// when a server is running we only execute console commands on server frames
		// (this mainly allows frikbot .way config files to work properly by staying in sync with the server qc)
		// otherwise we execute them on client frames
		if (sv.active ? sv_timer > 0 : cl_timer > 0)
		{
			// process console commands
//			R_TimeReport("preconsole");
			CL_VM_PreventInformationLeaks();
			Cbuf_Frame();
//			R_TimeReport("console");
		}

		//Con_Printf("%6.0f %6.0f\n", cl_timer * 1000000.0, sv_timer * 1000000.0);

		// if the accumulators haven't become positive yet, wait a while
		if (cls.state == ca_dedicated)
			wait = sv_timer * -1000000.0;
		else if (!sv.active || svs.threaded)
			wait = cl_timer * -1000000.0;
		else
			wait = max(cl_timer, sv_timer) * -1000000.0;

		if (!cls.timedemo && wait >= 1)
		{
			double time0, delta;

			if(host_maxwait.value <= 0)
				wait = min(wait, 1000000.0);
			else
				wait = min(wait, host_maxwait.value * 1000.0);
			if(wait < 1)
				wait = 1; // because we cast to int

			time0 = Sys_DirtyTime();
			if (sv_checkforpacketsduringsleep.integer && !sys_usenoclockbutbenchmark.integer && !svs.threaded) {
				NetConn_SleepMicroseconds((int)wait);
				if (cls.state != ca_dedicated)
					NetConn_ClientFrame(); // helps server browser get good ping values
				// TODO can we do the same for ServerFrame? Probably not.
			}
			else
				Sys_Sleep((int)wait);
			delta = Sys_DirtyTime() - time0;
			if (delta < 0 || delta >= 1800) delta = 0;
			if (!svs.threaded)
				svs.perf_acc_sleeptime += delta;
//			R_TimeReport("sleep");
			continue;
		}

		// limit the frametime steps to no more than 100ms each
		if (cl_timer > 0.1)
			cl_timer = 0.1;
		if (sv_timer > 0.1)
		{
			if (!svs.threaded)
				svs.perf_acc_lost += (sv_timer - 0.1);
			sv_timer = 0.1;
		}

		R_TimeReport("---");

	//-------------------
	//
	// server operations
	//
	//-------------------

		// limit the frametime steps to no more than 100ms each
		if (sv.active && sv_timer > 0 && !svs.threaded)
		{
			// execute one or more server frames, with an upper limit on how much
			// execution time to spend on server frames to avoid freezing the game if
			// the server is overloaded, this execution time limit means the game will
			// slow down if the server is taking too long.
			int framecount, framelimit = 1;
			double advancetime, aborttime = 0;
			float offset;
			prvm_prog_t *prog = SVVM_prog;

			// run the world state
			// don't allow simulation to run too fast or too slow or logic glitches can occur

			// stop running server frames if the wall time reaches this value
			if (sys_ticrate.value <= 0)
				advancetime = sv_timer;
			else if (cl.islocalgame && !sv_fixedframeratesingleplayer.integer)
			{
				// synchronize to the client frametime, but no less than 10ms and no more than 100ms
				advancetime = bound(0.01, cl_timer, 0.1);
			}
			else
			{
				advancetime = sys_ticrate.value;
				// listen servers can run multiple server frames per client frame
				framelimit = cl_maxphysicsframesperserverframe.integer;
				aborttime = Sys_DirtyTime() + 0.1;
			}
			if(slowmo.value > 0 && slowmo.value < 1)
				advancetime = min(advancetime, 0.1 / slowmo.value);
			else
				advancetime = min(advancetime, 0.1);

			if(advancetime > 0)
			{
				offset = Sys_DirtyTime() - dirtytime;if (offset < 0 || offset >= 1800) offset = 0;
				offset += sv_timer;
				++svs.perf_acc_offset_samples;
				svs.perf_acc_offset += offset;
				svs.perf_acc_offset_squared += offset * offset;
				if(svs.perf_acc_offset_max < offset)
					svs.perf_acc_offset_max = offset;
			}

			// only advance time if not paused
			// the game also pauses in singleplayer when menu or console is used
			sv.frametime = advancetime * slowmo.value;
			if (host_framerate.value)
				sv.frametime = host_framerate.value;
			if (sv.paused || (cl.islocalgame && (key_dest != key_game || key_consoleactive || cl.csqc_paused)))
				sv.frametime = 0;

			for (framecount = 0;framecount < framelimit && sv_timer > 0;framecount++)
			{
				sv_timer -= advancetime;

				// move things around and think unless paused
				if (sv.frametime)
					SV_Physics();

				// if this server frame took too long, break out of the loop
				if (framelimit > 1 && Sys_DirtyTime() >= aborttime)
					break;
			}
			R_TimeReport("serverphysics");

			// send all messages to the clients
			SV_SendClientMessages();

			if (sv.paused == 1 && realtime > sv.pausedstart && sv.pausedstart > 0) {
				prog->globals.fp[OFS_PARM0] = realtime - sv.pausedstart;
				PRVM_serverglobalfloat(time) = sv.time;
				prog->ExecuteProgram(prog, PRVM_serverfunction(SV_PausedTic), "QC function SV_PausedTic is missing");
			}

			// send an heartbeat if enough time has passed since the last one
			NetConn_Heartbeat(0);
			R_TimeReport("servernetwork");
		}
		else if (!svs.threaded)
		{
			// don't let r_speeds display jump around
			R_TimeReport("serverphysics");
			R_TimeReport("servernetwork");
		}

	//-------------------
	//
	// client operations
	//
	//-------------------

		if (cls.state != ca_dedicated && (cl_timer > 0 || cls.timedemo || ((vid_activewindow ? cl_maxfps : cl_maxidlefps).value < 1)))
		{
			R_TimeReport("---");
			Collision_Cache_NewFrame();
			R_TimeReport("photoncache");
			// decide the simulation time
			if (cls.capturevideo.active)
			{
				//***
				if (cls.capturevideo.realtime)
					clframetime = cl.realframetime = max(cl_timer, 1.0 / cls.capturevideo.framerate);
				else
				{
					clframetime = 1.0 / cls.capturevideo.framerate;
					cl.realframetime = max(cl_timer, clframetime);
				}
			}
			else if (vid_activewindow && cl_maxfps.value >= 1 && !cls.timedemo)
			{
				clframetime = cl.realframetime = max(cl_timer, 1.0 / cl_maxfps.value);
				// when running slow, we need to sleep to keep input responsive
				wait = bound(0, cl_maxfps_alwayssleep.value * 1000, 100000);
				if (wait > 0)
					Sys_Sleep((int)wait);
			}
			else if (!vid_activewindow && cl_maxidlefps.value >= 1 && !cls.timedemo)
				clframetime = cl.realframetime = max(cl_timer, 1.0 / cl_maxidlefps.value);
			else
				clframetime = cl.realframetime = cl_timer;

			// apply slowmo scaling
			clframetime *= cl.movevars_timescale;
			// scale playback speed of demos by slowmo cvar
			if (cls.demoplayback)
			{
				clframetime *= slowmo.value;
				// if demo playback is paused, don't advance time at all
				if (cls.demopaused)
					clframetime = 0;
			}
			else
			{
				// host_framerate overrides all else
				if (host_framerate.value)
					clframetime = host_framerate.value;

				if (cl.paused || (cl.islocalgame && (key_dest != key_game || key_consoleactive || cl.csqc_paused)))
					clframetime = 0;
			}

			if (cls.timedemo)
				clframetime = cl.realframetime = cl_timer;

			// deduct the frame time from the accumulator
			cl_timer -= cl.realframetime;

			cl.oldtime = cl.time;
			cl.time += clframetime;

			// update video
			if (host_speeds.integer)
				time1 = Sys_DirtyTime();
			R_TimeReport("pre-input");

			// Collect input into cmd
			CL_Input();

			R_TimeReport("input");

			// check for new packets
			NetConn_ClientFrame();

			// read a new frame from a demo if needed
			CL_ReadDemoMessage();
			R_TimeReport("clientnetwork");

			// now that packets have been read, send input to server
			CL_SendMove();
			R_TimeReport("sendmove");

			// update client world (interpolate entities, create trails, etc)
			CL_UpdateWorld();
			R_TimeReport("lerpworld");

			CL_Video_Frame();

			R_TimeReport("client");

			CL_UpdateScreen();
			CL_MeshEntities_Reset();
			R_TimeReport("render");

			if (host_speeds.integer)
				time2 = Sys_DirtyTime();

			// update audio
			if(cl.csqc_usecsqclistener)
			{
				S_Update(&cl.csqc_listenermatrix);
				cl.csqc_usecsqclistener = false;
			}
			else
				S_Update(&r_refdef.view.matrix);

			CDAudio_Update();
			R_TimeReport("audio");

			// reset gathering of mouse input
			in_mouse_x = in_mouse_y = 0;

			if (host_speeds.integer)
			{
				pass1 = (int)((time1 - time3)*1000000);
				time3 = Sys_DirtyTime();
				pass2 = (int)((time2 - time1)*1000000);
				pass3 = (int)((time3 - time2)*1000000);
				Con_Printf("%6ius total %6ius server %6ius gfx %6ius snd\n",
							pass1+pass2+pass3, pass1, pass2, pass3);
			}
		}

#if MEMPARANOIA
		Mem_CheckSentinelsGlobal();
#else
		if (developer_memorydebug.integer)
			Mem_CheckSentinelsGlobal();
#endif

		// if there is some time remaining from this frame, reset the timers
		if (cl_timer >= 0)
			cl_timer = 0;
		if (sv_timer >= 0)
		{
			if (!svs.threaded)
				svs.perf_acc_lost += sv_timer;
			sv_timer = 0;
		}

		host_framecount++;
	}
}
コード例 #25
0
ファイル: shell.c プロジェクト: koson/atinom
portTASK_FUNCTION(shell, pvParameters )
{
  	int c;
  	xTaskHandle xHandle;
  	printf("\n%s v%s\r\n", NAMA_BOARD, VERSI_KOMON);

  	printf("Daun Biru Engineering, Des 2008\r\n");
  	printf("=========================================\r\n");
  	printf("ARM-GCC %s : %s : %s\r\n", __VERSION__, __DATE__, __TIME__);
  	printf("CPU = LPC 2387, %d MHz,", configCPU_CLOCK_HZ/1000000);
  	printf(" FreeRTOS 5.1.1\r\n");

	if (configUSE_PREEMPTION == 0)
		printf("NON Preemptive kernel digunakan !\r\n"); 
	else
		printf("Preemptive kernel digunakan !\r\n");
	
	#ifdef USB_TEST
	Host_Init();               /* Initialize the lpc2468 host controller                                    */
    //c = Host_EnumDev();       /* Enumerate the device connected */     
   	// if (c == 0) printf("Ketemu !\r\n");  
   	
   	#if 1
   	if (OHCIInit() == 0)
   	{
   		printf("------------ Init error \r\n");
   	}
   	
   	//install_usb_interrupt();
   	#endif
	#endif
	
	/* 
	 * add command
	 */
  	//tinysh_add_command(&myfoocmd);
  	tinysh_add_command(&printenv_cmd);
	tinysh_add_command(&setenv_cmd);
//	tinysh_add_command(&save_env_cmd);
	tinysh_add_command(&reset_cmd);
	tinysh_add_command(&cek_stack_cmd);
	tinysh_add_command(&uptime_cmd);
	tinysh_add_command(&version_cmd);
	
#ifdef BOARD_KOMON_KONTER
	tinysh_add_command(&cek_rpm_cmd);
	tinysh_add_command(&set_kanal_cmd);
#endif

//#ifdef BOARD_TAMPILAN
#ifdef CARI_SUMBER
	tinysh_add_command(&cek_sumber_cmd);
	tinysh_add_command(&set_sumber_cmd);
	//tinysh_add_command(&cek_mesin_cmd);
	//tinysh_add_command(&set_mesin_cmd);
	//tinysh_add_command(&cek_titik_cmd);
	//tinysh_add_command(&set_titik_cmd);
	
	tinysh_add_command(&save_sumber_cmd);
	//tinysh_add_command(&save_mesin_cmd);
	//tinysh_add_command(&save_titik_cmd);
#endif


#ifdef BOARD_KOMON_A_RTD
	tinysh_add_command(&cek_adc_cmd);
	tinysh_add_command(&set_kanal_cmd);
#endif

#ifdef BOARD_KOMON_420_SAJA
#ifdef PAKAI_ADC
	tinysh_add_command(&cek_adc_cmd);
	tinysh_add_command(&lihat_data_cmd);
#endif
	tinysh_add_command(&set_kanal_cmd);
#endif

#ifdef BOARD_KOMON_420_SABANG
#ifdef PAKAI_ADC
	tinysh_add_command(&cek_adc_cmd);
	//tinysh_add_command(&lihat_data_cmd);

	tinysh_add_command(&set_kanal_cmd);
#endif
#endif

#ifdef BOARD_KOMON_B_THERMO
	tinysh_add_command(&cek_adc_cmd);
	tinysh_add_command(&set_kanal_cmd);
#endif

#ifdef PAKE_TELNETD
	tinysh_add_command(&matikan_telnet_cmd);
#endif

#ifdef PAKAI_PM
//	tinysh_add_command(&cek_pm_cmd);
//	tinysh_add_command(&set_pm_cmd);
//	tinysh_add_command(&cek_konfig_pmnya_cmd);
#endif	
	
#ifdef PAKAI_GSM_FTP
	tinysh_add_command(&set_modem_ftp_cmd);
	tinysh_add_command(&cek_modem_cmd);
	tinysh_add_command(&set_modem_gsm_cmd);
	tinysh_add_command(&gsm_ftp_cmd);
	tinysh_add_command(&cek_ftp_cmd);
	
#endif	

#ifdef PAKAI_SMS
	tinysh_add_command(&cek_pulsa_cmd);
	tinysh_add_command(&kirim_sms_cmd);
	tinysh_add_command(&hapus_sms_cmd);
	tinysh_add_command(&baca_sms_cmd);
	tinysh_add_command(&baca_sms_semua_cmd);
	tinysh_add_command(&sms_monita_cmd);
#endif 

#ifdef PAKAI_CRON
	tinysh_add_command(&set_cron_cmd);
	tinysh_add_command(&cek_cron_cmd);
#endif

//#ifdef CARI_SUMBERNYA
#ifdef BOARD_TAMPILAN
	tinysh_add_command(&cek_group_cmd);
	tinysh_add_command(&set_group_cmd);
	
	//tinysh_add_command(&cek_sumber_cmd);
	//tinysh_add_command(&set_sumber_cmd);
	
	// data
	//tinysh_add_command(&set_data_cmd);
	//tinysh_add_command(&cek_data_cmd);
	//printf("board_tampilan\r\n");

#endif
vTaskDelay(100);
#ifdef BANYAK_SUMBER
	tinysh_add_command(&cek_sumber_cmd);
	tinysh_add_command(&set_sumber_cmd);
	tinysh_add_command(&set_data_cmd);
	tinysh_add_command(&cek_data_cmd);
	//printf("banyak sumber\r\n");
#endif
vTaskDelay(100);

#if (VERSI_KONFIGx == 2)
	tinysh_add_command(&cek_group_cmd);
	tinysh_add_command(&set_group_cmd);
	
	tinysh_add_command(&cek_sumber_cmd);
	tinysh_add_command(&set_sumber_cmd);
	
	// data
	tinysh_add_command(&set_data_cmd);
	tinysh_add_command(&cek_data_cmd);
#endif	

// simpan file
#ifdef PAKAI_FILE_SIMPAN	
	tinysh_add_command(&cek_file_cmd);
	tinysh_add_command(&set_file_cmd);
	tinysh_add_command(&del_direktori_cmd);
	tinysh_add_command(&cari_doku_cmd);
	tinysh_add_command(&hapus_filenya_cmd);
#endif


#ifdef CENDOL
	tinysh_add_command(&cek_konfig_cmd);
	tinysh_add_command(&set_konfig_cmd);
#endif

#ifdef PAKAI_MULTI_SERIAL
	#if defined(PAKAI_SERIAL_1) || defined(PAKAI_SERIAL_2) || defined(PAKAI_SERIAL_3)
		tinysh_add_command(&kirim_serial_cmd);
	#endif
#endif
	/* add sub commands
 	*/
  	//tinysh_add_command(&ctxcmd);
  	//tinysh_add_command(&item1);
  	//tinysh_add_command(&item2);

	/* use a command from the stack
 	* !!! this is only possible because the shell will have exited
 	* before the stack of function main !!!
 	*/
  	/*
	{
    	tinysh_cmd_t quitcmd={0,"quit","exit shell",0,reset_to_0,
                          (void *)&again,0,0};
    	tinysh_add_command(&quitcmd);
  	}*/

	/* add atoxi support test command */
  	//tinysh_add_command(&atoxi_cmd);



	/* add a background command */
  	//tinysh_add_command(&bgcmd);
  	//xTaskCreate( bg_cmd_thread, "bg_cmd", 1000, NULL, 2, &xHandle);

	#ifdef PAKAI_MMC
  	vTaskDelay(340);
  	#else
  	vTaskDelay(450);
  	#endif

	#ifdef PAKAI_SELENOID
		static tinysh_cmd_t set_relay_cmd={0,"set_relay","setting relay", "help default ",set_relay,0,0,0};
		tinysh_add_command(&set_relay_cmd);
	#endif
	
	
//#ifdef BOARD_TAMPILAN	
	#ifdef CARI_SUMBERx	
	// cek ukuran struk
	printf("size struct Mesin  = %d\r\n", sizeof (struct t_mesin) * JML_MESIN);
	printf("size struct Sumber = %d\r\n", sizeof (struct t_sumber) * JML_SUMBER);
	printf("size struct Titik  = %d\r\n", sizeof (struct t_titik) * JML_MESIN * TIAP_MESIN);
	//printf("size struct sambungan = %d\r\n", sizeof (samb));
	#endif
	
	#ifdef BOARD_KOMON_420_SAJA
	kalibrasi_adc1();
	vTaskDelay(100);
	start_adc_1();
	#endif
	
	#ifdef BOARD_KOMON_420_SABANG
		#ifdef PAKAI_ADC
			kalibrasi_adc1();
			vTaskDelay(100);
			start_adc_1();
		#endif
		vTaskDelay(100);
	#endif
	
	#ifdef BOARD_KOMON_A_RTD
	kalibrasi_adc1();
	vTaskDelay(100);
	start_adc_1();
	#endif
	
	#ifdef BOARD_KOMON_B_THERMO
	kalibrasi_adc1();
	vTaskDelay(100);
	start_adc_1();
	#endif
	
	#ifdef BOARD_KOMON_KONTER
		#ifdef PAKAI_RTC
		rtc_init();
		vTaskDelay(100);
		//baca_rtc_mem();
		#endif
	#endif
	
	#ifdef PAKAI_MMC
	tinysh_add_command(&util_ls_cmd);
	tinysh_add_command(&util_mkdir_cmd);
	tinysh_add_command(&util_cd_cmd);
	tinysh_add_command(&util_pwd_cmd);
	tinysh_add_command(&util_view_cmd);
	
	init_gpio_mmc();
	uncs_mmc();
	vTaskDelay(5);
	set_fs_mount();
	vTaskDelay(5);
	status_MMC = cek_fs_free();
	
	struct t_simpan_file *ts;
	ts = (char *) ALMT_SFILE;
	vTaskDelay(5);
	
	if (status_MMC) {
		printf("_____MMC ERROR !!!!_____ %d\r\n", status_MMC);
		if (status_MMC==13) 
			printf("_____MMC FR_NO_FILESYSTEM, kudu diformat FAT32 !!!\r\n");
		
		if (ts->set==1) {
			set_file_mati();
			printf("simpan data ke file dimatikan !!\r\n");
		}
	} else {
		status_MMC = 1;
		printf("MMC aktif. Siap simpan data: %d\r\n", status_MMC);
	}
	/*
	FR_NOT_READY,		3 
	FR_NO_FILE,			4 
	FR_NO_PATH,			5 
	FR_INVALID_NAME,	6 
	FR_DENIED,			7 
	FR_EXIST,			8 
	FR_INVALID_OBJECT,	9 
	FR_WRITE_PROTECTED,	10
	FR_INVALID_DRIVE,	11
	FR_NOT_ENABLED,		12
	FR_NO_FILESYSTEM,	13
	FR_MKFS_ABORTED,	14
	FR_TIMEOUT			15
	//*/
	
	
	sprintf(abs_path, "%s", "");
	#endif
	
	#ifdef PAKAI_RTC	
	tinysh_add_command(&set_date_cmd);
	#endif
	
	
	struct t_env *envx;
	envx = (char *) ALMT_ENV;

	sprintf(str,"%s%d$ ", PROMPT, (envx->IP3));
	tinysh_set_prompt(str);
	//tinysh_set_prompt( PROMPT );
	/* force untuk tampil prompt */
	tinysh_char_in('\r');
	int perdetiknya=0;

	/*
	printf("nChr: %d, nInt: %d, nLInt: %d, nFloat: %d, nDouble: %d\r\n", \
		sizeof(char), sizeof(int), sizeof(long int), sizeof(float), sizeof(double));
	printf("nChr: %d, nInt: %d, nLInt: %d, nFloat: %d, nDouble: %d\r\n", \
		255, 20000000, 20000000, 20000000, 20000000);
	//*/
	/*
	 * main loop shell
  	 */
  	int lop = 0;
  	while(1)
    {
		vTaskDelay(1);
	  lop++;
	  if (xSerialGetChar(1, &c, 100 ) == pdTRUE)
	  {
			lop = 0;
			tinysh_char_in((unsigned char)c);
	  }	
	  
	  /* dilindungi password setiap menit tidak ada aktifitas*/
	  if (lop > 6000)
	  {
			lop = 0;
			printf("\r\nPasswd lock!\r\n");
			while(1)
			{
				if (xSerialGetChar(1, &c, 100) == pdTRUE)	{
					if (proses_passwd( &c ) == 1) break;
				}
				#ifdef PAKAI_MMC
					#ifdef PAKAI_FILE_SIMPAN
						perdetiknya++;
						if (perdetiknya==10 && status_MMC==1) {
							proses_simpan_file();
							perdetiknya=0;
						}
					#endif
				#endif
				
				#ifdef PAKAI_ADC
					#ifdef BOARD_KOMON_A_RTD
					proses_data_adc();
					#endif
					 
					#ifdef BOARD_KOMON_B_THERMO
					proses_data_adc();
					#endif
					
					#ifdef BOARD_KOMON_420_SABANG
					proses_data_adc();
					#endif
					
					#ifdef BOARD_KOMON_420_SAJA
					proses_data_adc();
					hitung_datanya();
					#endif
					
					simpan_ke_data_f();
				#endif
				
				#ifdef BOARD_KOMON_KONTER
					data_frek_rpm();
				#endif
			}
	  }
	  
		// pembacaaan ADC dipindah dari task eth ke shell 1 Okt 2010.
		#ifdef PAKAI_ADC
			#ifdef BOARD_KOMON_A_RTD
				proses_data_adc();
			#endif
		 
			#ifdef BOARD_KOMON_B_THERMO
				proses_data_adc();
			#endif
				 
			#ifdef BOARD_KOMON_420_SAJA
				proses_data_adc();
				hitung_datanya();
			#endif
			
			#ifdef BOARD_KOMON_420_SABANG
				proses_data_adc();
			#endif
			
			simpan_ke_data_f();
		#endif
		
		#ifdef BOARD_KOMON_KONTER
			data_frek_rpm();
		#endif
	  
		#ifdef PAKAI_MMC
			#ifdef PAKAI_FILE_SIMPAN
				perdetiknya++;
				if (perdetiknya==10 && status_MMC==1) {
					proses_simpan_file();
					perdetiknya=0;
				}
			#endif
		#endif
	  
	  #ifdef USB_TEST
	  c = HC_INT_STAT ;
	  {
	  	printf("%4d: usb stat 0x%X\r\n", lop, c);
	  	
	  	HC_INT_STAT |= c;
	  	
	  	usb_terup = 0;
	  }
	  #endif
    }
  	
  	return;
}
コード例 #26
0
ファイル: sys_dos.c プロジェクト: ACIIL/Quake
/*
================
main
================
*/
int main (int c, char **v)
{
	double			time, oldtime, newtime;
	extern void (*dos_error_func)(char *, ...);
	static	char	cwd[1024];

	printf ("Quake v%4.2f\n", VERSION);
	
// make sure there's an FPU
	signal(SIGNOFP, Sys_NoFPUExceptionHandler);
	signal(SIGABRT, Sys_DefaultExceptionHandler);
	signal(SIGALRM, Sys_DefaultExceptionHandler);
	signal(SIGKILL, Sys_DefaultExceptionHandler);
	signal(SIGQUIT, Sys_DefaultExceptionHandler);
	signal(SIGINT, Sys_DefaultExceptionHandler);

	if (fptest_temp >= 0.0)
		fptest_temp += 0.1;

	COM_InitArgv (c, v);

	quakeparms.argc = com_argc;
	quakeparms.argv = com_argv;

	dos_error_func = Sys_Error;

	Sys_DetectWin95 ();
	Sys_PageInProgram ();
	Sys_GetMemory ();

	atexit (Sys_AtExit);	// in case we crash

	getwd (cwd);
	if (cwd[Q_strlen(cwd)-1] == '/') cwd[Q_strlen(cwd)-1] = 0;
	quakeparms.basedir = cwd; //"f:/quake";

	isDedicated = (COM_CheckParm ("-dedicated") != 0);

	Sys_Init ();

	if (!isDedicated)
		dos_registerintr(9, TrapKey);

//Sys_InitStackCheck ();
	
	Host_Init(&quakeparms);

//Sys_StackCheck ();

//Con_Printf ("Top of stack: 0x%x\n", &time);
	oldtime = Sys_FloatTime ();
	while (1)
	{
		newtime = Sys_FloatTime ();
		time = newtime - oldtime;

		if (cls.state == ca_dedicated && (time<sys_ticrate.value))
			continue;

		Host_Frame (time);

//Sys_StackCheck ();

		oldtime = newtime;
	}
}
コード例 #27
0
ファイル: sys_linux.c プロジェクト: ACIIL/Quake
int main (int c, char **v)
{

	double		time, oldtime, newtime;
	quakeparms_t parms;
	extern int vcrFile;
	extern int recording;
	int j;

//	static char cwd[1024];

//	signal(SIGFPE, floating_point_exception_handler);
	signal(SIGFPE, SIG_IGN);

	memset(&parms, 0, sizeof(parms));

	COM_InitArgv(c, v);
	parms.argc = com_argc;
	parms.argv = com_argv;

#ifdef GLQUAKE
	parms.memsize = 16*1024*1024;
#else
	parms.memsize = 8*1024*1024;
#endif

	j = COM_CheckParm("-mem");
	if (j)
		parms.memsize = (int) (Q_atof(com_argv[j+1]) * 1024 * 1024);
	parms.membase = malloc (parms.memsize);

	parms.basedir = basedir;
// caching is disabled by default, use -cachedir to enable
//	parms.cachedir = cachedir;

	fcntl(0, F_SETFL, fcntl (0, F_GETFL, 0) | FNDELAY);

    Host_Init(&parms);

	Sys_Init();

	if (COM_CheckParm("-nostdout"))
		nostdout = 1;
	else {
		fcntl(0, F_SETFL, fcntl (0, F_GETFL, 0) | FNDELAY);
		printf ("Linux Quake -- Version %0.3f\n", LINUX_VERSION);
	}

    oldtime = Sys_FloatTime () - 0.1;
    while (1)
    {
// find time spent rendering last frame
        newtime = Sys_FloatTime ();
        time = newtime - oldtime;

        if (cls.state == ca_dedicated)
        {   // play vcrfiles at max speed
            if (time < sys_ticrate.value && (vcrFile == -1 || recording) )
            {
				usleep(1);
                continue;       // not time to run a server only tic yet
            }
            time = sys_ticrate.value;
        }

        if (time > sys_ticrate.value*2)
            oldtime = newtime;
        else
            oldtime += time;

        Host_Frame (time);

// graphic debugging aids
        if (sys_linerefresh.value)
            Sys_LineRefresh ();
    }

}
コード例 #28
0
ファイル: main.cpp プロジェクト: BackupGGCode/quake-gamecube
		static void* main_thread_function(void*)
		{
			u32 level, real_heap_size;

			// hope the parms are all set by now
			COM_InitArgv(parms_number, parms_array);

			_CPU_ISR_Disable(level);
			heap = (char *)align32(SYS_GetArena2Lo());
			real_heap_size = heap_size - ((u32)heap - (u32)SYS_GetArena2Lo());
			if ((u32)heap + real_heap_size > (u32)SYS_GetArena2Hi())
			{
				_CPU_ISR_Restore(level);
				Sys_Error("heap + real_heap_size > (u32)SYS_GetArena2Hi()");
			}	
			else
			{
				SYS_SetArena2Lo(heap + real_heap_size);
				_CPU_ISR_Restore(level);
			}

			VIDEO_SetBlack(TRUE);

			// Initialise the Host module.
			quakeparms_t parms;
			memset(&parms, 0, sizeof(parms));
			parms.argc		= com_argc;
			parms.argv		= com_argv;
			parms.basedir	= QUAKE_WII_BASEDIR;
			parms.memsize	= real_heap_size;
			parms.membase	= heap;
			if (parms.membase == 0)
			{
				Sys_Error("Heap allocation failed");
			}
			memset(parms.membase, 0, parms.memsize);
			Host_Init(&parms);

#if TIME_DEMO
			Cbuf_AddText("map start\n");
			Cbuf_AddText("wait\n");
			Cbuf_AddText("timedemo demo1\n");
#endif
#if TEST_CONNECTION
			Cbuf_AddText("connect 192.168.0.2");
#endif

			SYS_SetResetCallback(reset_system);
			SYS_SetPowerCallback(shutdown_system);

			VIDEO_SetBlack(FALSE);

			// Run the main loop.
			u64 last_time = gettime();
			for (;;)
			{
				if (want_to_reset)
					Sys_Reset();
				if (want_to_shutdown)
					Sys_Shutdown();

				// Get the frame time in ticks.
				const u64		current_time	= gettime();
				const u64		time_delta		= current_time - last_time;
				const double	seconds	= time_delta * (0.001f / TB_TIMER_CLOCK);
				last_time = current_time;

				// Run the frame.
				Host_Frame(seconds);
			};

			// Quit (this code is never reached).
			Sys_Quit();
			return 0;
		}
コード例 #29
0
void AndroidInit2(int width, int height)
{
  PMPLOG(("AndroidInit2 %d,%d", width, height));

  gInitialized = true;
  PMPBEGIN(("AndroidInit2"));
  quakeparms_t parms;
  int j;
  int c = 0;
  const char* v[] = {"quake", (char*) 0};

  scr_width = width;
  scr_height = height;

//	static char cwd[1024];

//	signal(SIGFPE, floating_point_exception_handler);
//  signal(SIGFPE, SIG_IGN);

  memset(&parms, 0, sizeof(parms));

  if (gArgc) {
      COM_InitArgv(gArgc, (const char**) gArgv);
  }
  else {
      COM_InitArgv(c, (const char**) v);
  }

  parms.argc = com_argc;
  parms.argv = com_argv;

  parms.memsize = 16*1024*1024;

  j = COM_CheckParm("-mem");
  if (j)
    parms.memsize = (int) (Q_atof(com_argv[j+1]) * 1024 * 1024);
  parms.membase = malloc (parms.memsize);

  const char* basedir = basedir2;
  if(direxists(basedir1))
  {
    basedir = basedir1;
  }
  else if(direxists(basedir2))
  {
    basedir = basedir2;
  }
  else
  {
    Sys_Error("Could not find data directories %s or %s", basedir1, basedir2);
  }
  parms.basedir = basedir;

  CheckGLCacheVersion(basedir);

// caching is disabled by default, use -cachedir to enable
//	parms.cachedir = cachedir;

#if 0 // FNDELAY not implemented
  noconinput = COM_CheckParm("-noconinput");
  if (!noconinput)
    fcntl(0, F_SETFL, fcntl (0, F_GETFL, 0) | FNDELAY);
#endif

  if (COM_CheckParm("-nostdout"))
    nostdout = 1;

  Sys_Init();

    Host_Init(&parms);

    g_oldtime = Sys_FloatTime ();
  PMPEND(("AndroidInit2"));
}
コード例 #30
0
int main (int argc, char **argv)
{
	double		time, oldtime, newtime;

	PrintVersion();

// make sure there's an FPU
	signal(SIGNOFP, Sys_NoFPUExceptionHandler);
	signal(SIGABRT, Sys_DefaultExceptionHandler);
	signal(SIGALRM, Sys_DefaultExceptionHandler);
	signal(SIGKILL, Sys_DefaultExceptionHandler);
	signal(SIGQUIT, Sys_DefaultExceptionHandler);
	signal(SIGINT, Sys_DefaultExceptionHandler);

	if (fptest_temp >= 0.0)
		fptest_temp += 0.1;

	dos_error_func = Sys_Error;

	memset (cwd, 0, sizeof(cwd));
	if (Sys_GetBasedir(argv[0], cwd, sizeof(cwd)) != 0)
		Sys_Error ("Couldn't determine current directory");

	/* initialize the host params */
	memset (&quakeparms, 0, sizeof(quakeparms));
	quakeparms.basedir = cwd;
	quakeparms.userdir = cwd;
	quakeparms.argc = argc;
	quakeparms.argv = argv;
	host_parms = &quakeparms;

	LOG_Init (&quakeparms);

	COM_ValidateByteorder ();

	Sys_DetectWin95 ();
	Sys_PageInProgram ();
	Sys_GetMemory ();

	atexit (Sys_AtExit);	// in case we crash

	isDedicated = (COM_CheckParm ("-dedicated") != 0);

	Sys_Init ();

	if (!isDedicated)
		dos_registerintr(9, TrapKey);

//	Sys_InitStackCheck ();

	Host_Init();

//	Sys_StackCheck ();
//	Con_Printf ("Top of stack: 0x%x\n", &time);

	oldtime = Sys_DoubleTime ();
	while (1)
	{
		newtime = Sys_DoubleTime ();
		time = newtime - oldtime;

		if (isDedicated && (time < sys_ticrate.value))
			continue;

		Host_Frame (time);

//		Sys_StackCheck ();

		oldtime = newtime;
	}
}