void stellaris_uart0_irq(void)
{
arm_cm_irq_entry();
//
// Get the interrrupt status.
//
unsigned long ulStatus = UARTIntStatus(DEBUG_UART, true);
//
// Clear the asserted interrupts.
//
UARTIntClear(DEBUG_UART, ulStatus);
//
// Loop while there are characters in the receive FIFO.
//
bool resched = false;
while (UARTCharsAvail(DEBUG_UART)) {
//
// Read the next character from the UART and write it back to the UART.
//
unsigned char c = UARTCharGetNonBlocking(DEBUG_UART);
cbuf_write_char(&debug_rx_buf, c, false);
resched = true;
}
arm_cm_irq_exit(resched);
}
void stm32_USART1_IRQ(void)
{
bool resched = false;
arm_cm_irq_entry();
/* UART parity error interrupt occurred -------------------------------------*/
if ((__HAL_UART_GET_IT(&handle, UART_IT_PE) != RESET) && (__HAL_UART_GET_IT_SOURCE(&handle, UART_IT_PE) != RESET)) {
__HAL_UART_CLEAR_PEFLAG(&handle);
printf("UART PARITY ERROR\n");
}
/* UART frame error interrupt occurred --------------------------------------*/
if ((__HAL_UART_GET_IT(&handle, UART_IT_FE) != RESET) && (__HAL_UART_GET_IT_SOURCE(&handle, UART_IT_ERR) != RESET)) {
__HAL_UART_CLEAR_FEFLAG(&handle);
printf("UART FRAME ERROR\n");
}
/* UART noise error interrupt occurred --------------------------------------*/
if ((__HAL_UART_GET_IT(&handle, UART_IT_NE) != RESET) && (__HAL_UART_GET_IT_SOURCE(&handle, UART_IT_ERR) != RESET)) {
__HAL_UART_CLEAR_NEFLAG(&handle);
printf("UART NOISE ERROR\n");
}
/* UART Over-Run interrupt occurred -----------------------------------------*/
if ((__HAL_UART_GET_IT(&handle, UART_IT_ORE) != RESET) && (__HAL_UART_GET_IT_SOURCE(&handle, UART_IT_ERR) != RESET)) {
__HAL_UART_CLEAR_OREFLAG(&handle);
printf("UART OVERRUN ERROR\n");
}
/* UART in mode Receiver ---------------------------------------------------*/
if ((__HAL_UART_GET_IT(&handle, UART_IT_RXNE) != RESET) && (__HAL_UART_GET_IT_SOURCE(&handle, UART_IT_RXNE) != RESET)) {
/* we got a character */
uint8_t c = (uint8_t)(handle.Instance->RDR & 0xff);
if (cbuf_write_char(&uart1_rx_buf, c, false) != 1) {
printf("WARNING: uart cbuf overrun!\n");
}
resched = true;
/* Clear RXNE interrupt flag */
__HAL_UART_SEND_REQ(&handle, UART_RXDATA_FLUSH_REQUEST);
}
/* UART in mode Transmitter ------------------------------------------------*/
if ((__HAL_UART_GET_IT(&handle, UART_IT_TXE) != RESET) &&(__HAL_UART_GET_IT_SOURCE(&handle, UART_IT_TXE) != RESET)) {
;
}
/* UART in mode Transmitter (transmission end) -----------------------------*/
if ((__HAL_UART_GET_IT(&handle, UART_IT_TC) != RESET) &&(__HAL_UART_GET_IT_SOURCE(&handle, UART_IT_TC) != RESET)) {
;
}
arm_cm_irq_exit(resched);
}
void sam3_uart_irq(void)
{
inc_critical_section();
unsigned char c;
if (uart_read(UART, &c) == 0) {
cbuf_write_char(&debug_rx_buf, c, false);
cm3_trigger_preempt();
}
dec_critical_section();
}
static enum handler_return uart_irq_handler(void *arg)
{
unsigned char c;
bool resched = false;
while (inp(uart_io_port + 5) & (1<<0)) {
c = inp(uart_io_port + 0);
cbuf_write_char(&uart_rx_buf, c, false);
resched = true;
}
return resched ? INT_RESCHEDULE : INT_NO_RESCHEDULE;
}
void sam3_uart_irq(void)
{
arm_cm_irq_entry();
bool resched = false;
unsigned char c;
if (uart_read(UART, &c) == 0) {
cbuf_write_char(&debug_rx_buf, c, false);
resched = true;
}
arm_cm_irq_exit(resched);
}
static interrupt_eoi uart_irq_handler(void* arg) {
/* read interrupt status and mask */
while ((UARTREG(MX8_USR1) & USR1_RRDY)) {
if (cbuf_space_avail(&uart_rx_buf) == 0) {
break;
}
char c = UARTREG(MX8_URXD) & 0xFF;
cbuf_write_char(&uart_rx_buf, c);
}
/* Signal if anyone is waiting to TX */
if (UARTREG(MX8_UCR1) & UCR1_TRDYEN) {
spin_lock(&uart_spinlock);
if (!(UARTREG(MX8_USR2) & UTS_TXFULL)) {
// signal
event_signal(&uart_dputc_event, true);
}
spin_unlock(&uart_spinlock);
}
return IRQ_EOI_DEACTIVATE;
}