CaptureInterfacesDialog::CaptureInterfacesDialog(QWidget *parent) :
GeometryStateDialog(parent),
ui(new Ui::CaptureInterfacesDialog)
{
ui->setupUi(this);
loadGeometry();
setWindowTitle(wsApp->windowTitleString(tr("Capture Interfaces")));
stat_timer_ = NULL;
stat_cache_ = NULL;
// XXX - Enable / disable as needed
ui->buttonBox->button(QDialogButtonBox::Ok)->setText(tr("Start"));
ui->buttonBox->button(QDialogButtonBox::Ok)->setEnabled((global_capture_opts.num_selected > 0)? true: false);
// Start out with the list *not* sorted, so they show up in the order
// in which they were provided
ui->interfaceTree->sortByColumn(-1, Qt::AscendingOrder);
ui->interfaceTree->setItemDelegateForColumn(col_interface_, &interface_item_delegate_);
ui->interfaceTree->setItemDelegateForColumn(col_traffic_, new SparkLineDelegate());
ui->interfaceTree->setItemDelegateForColumn(col_link_, &interface_item_delegate_);
ui->interfaceTree->setItemDelegateForColumn(col_snaplen_, &interface_item_delegate_);
#ifdef SHOW_BUFFER_COLUMN
ui->interfaceTree->setItemDelegateForColumn(col_buffer_, &interface_item_delegate_);
#else
ui->interfaceTree->setColumnHidden(col_buffer_, true);
#endif
#ifndef SHOW_MONITOR_COLUMN
ui->interfaceTree->setColumnHidden(col_monitor_, true);
#endif
ui->interfaceTree->setItemDelegateForColumn(col_filter_, &interface_item_delegate_);
interface_item_delegate_.setTree(ui->interfaceTree);
#if QT_VERSION >= QT_VERSION_CHECK(4, 7, 0)
ui->filenameLineEdit->setPlaceholderText(tr("Leave blank to use a temporary file"));
#endif
// Changes in interface selections or capture filters should be propagated
// to the main welcome screen where they will be applied to the global
// capture options.
connect(this, SIGNAL(interfacesChanged()), ui->captureFilterComboBox, SIGNAL(interfacesChanged()));
connect(ui->captureFilterComboBox, SIGNAL(captureFilterSyntaxChanged(bool)), this, SLOT(updateWidgets()));
connect(ui->captureFilterComboBox->lineEdit(), SIGNAL(textEdited(QString)),
this, SLOT(filterEdited()));
connect(ui->captureFilterComboBox->lineEdit(), SIGNAL(textEdited(QString)),
this, SIGNAL(captureFilterTextEdited(QString)));
connect(&interface_item_delegate_, SIGNAL(filterChanged(QString)),
ui->captureFilterComboBox->lineEdit(), SLOT(setText(QString)));
connect(&interface_item_delegate_, SIGNAL(filterChanged(QString)),
this, SIGNAL(captureFilterTextEdited(QString)));
connect(this, SIGNAL(ifsChanged()), this, SLOT(refreshInterfaceList()));
connect(wsApp, SIGNAL(localInterfaceListChanged()), this, SLOT(updateLocalInterfaces()));
connect(ui->browseButton, SIGNAL(clicked()), this, SLOT(browseButtonClicked()));
}
QgsAttributeTableDialog::QgsAttributeTableDialog( QgsVectorLayer *theLayer, QWidget *parent, Qt::WindowFlags flags )
: QDialog( parent, flags )
, mDock( nullptr )
, mLayer( theLayer )
, mRubberBand( nullptr )
, mCurrentSearchWidgetWrapper( nullptr )
{
setupUi( this );
// Fix selection color on loosing focus (Windows)
setStyleSheet( QgisApp::instance()->styleSheet() );
setAttribute( Qt::WA_DeleteOnClose );
QSettings settings;
// Initialize the window geometry
restoreGeometry( settings.value( "/Windows/BetterAttributeTable/geometry" ).toByteArray() );
QgsAttributeEditorContext context;
myDa = new QgsDistanceArea();
myDa->setSourceCrs( mLayer->crs() );
myDa->setEllipsoidalMode( QgisApp::instance()->mapCanvas()->mapSettings().hasCrsTransformEnabled() );
myDa->setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE ) );
context.setDistanceArea( *myDa );
context.setVectorLayerTools( QgisApp::instance()->vectorLayerTools() );
QgsFeatureRequest r;
if ( mLayer->geometryType() != QGis::NoGeometry &&
settings.value( "/qgis/attributeTableBehaviour", QgsAttributeTableFilterModel::ShowAll ).toInt() == QgsAttributeTableFilterModel::ShowVisible )
{
QgsMapCanvas *mc = QgisApp::instance()->mapCanvas();
QgsRectangle extent( mc->mapSettings().mapToLayerCoordinates( theLayer, mc->extent() ) );
r.setFilterRect( extent );
QgsGeometry *g = QgsGeometry::fromRect( extent );
mRubberBand = new QgsRubberBand( mc, QGis::Polygon );
mRubberBand->setToGeometry( g, theLayer );
delete g;
mActionShowAllFilter->setText( tr( "Show All Features In Initial Canvas Extent" ) );
}
// Initialize dual view
mMainView->init( mLayer, QgisApp::instance()->mapCanvas(), r, context );
// Initialize filter gui elements
mFilterActionMapper = new QSignalMapper( this );
mFilterColumnsMenu = new QMenu( this );
mActionFilterColumnsMenu->setMenu( mFilterColumnsMenu );
mApplyFilterButton->setDefaultAction( mActionApplyFilter );
// Set filter icon in a couple of places
QIcon filterIcon = QgsApplication::getThemeIcon( "/mActionFilter.svg" );
mActionShowAllFilter->setIcon( filterIcon );
mActionAdvancedFilter->setIcon( filterIcon );
mActionSelectedFilter->setIcon( filterIcon );
mActionVisibleFilter->setIcon( filterIcon );
mActionEditedFilter->setIcon( filterIcon );
// Connect filter signals
connect( mActionAdvancedFilter, SIGNAL( triggered() ), SLOT( filterExpressionBuilder() ) );
connect( mActionShowAllFilter, SIGNAL( triggered() ), SLOT( filterShowAll() ) );
connect( mActionSelectedFilter, SIGNAL( triggered() ), SLOT( filterSelected() ) );
connect( mActionVisibleFilter, SIGNAL( triggered() ), SLOT( filterVisible() ) );
connect( mActionEditedFilter, SIGNAL( triggered() ), SLOT( filterEdited() ) );
connect( mFilterActionMapper, SIGNAL( mapped( QObject* ) ), SLOT( filterColumnChanged( QObject* ) ) );
connect( mFilterQuery, SIGNAL( returnPressed() ), SLOT( filterQueryAccepted() ) );
connect( mActionApplyFilter, SIGNAL( triggered() ), SLOT( filterQueryAccepted() ) );
connect( mSetStyles, SIGNAL( pressed() ), SLOT( openConditionalStyles() ) );
// info from layer to table
connect( mLayer, SIGNAL( editingStarted() ), this, SLOT( editingToggled() ) );
connect( mLayer, SIGNAL( editingStopped() ), this, SLOT( editingToggled() ) );
connect( mLayer, SIGNAL( layerDeleted() ), this, SLOT( close() ) );
connect( mLayer, SIGNAL( selectionChanged() ), this, SLOT( updateTitle() ) );
connect( mLayer, SIGNAL( featureAdded( QgsFeatureId ) ), this, SLOT( updateTitle() ) );
connect( mLayer, SIGNAL( featuresDeleted( QgsFeatureIds ) ), this, SLOT( updateTitle() ) );
connect( mLayer, SIGNAL( attributeAdded( int ) ), this, SLOT( columnBoxInit() ) );
connect( mLayer, SIGNAL( attributeDeleted( int ) ), this, SLOT( columnBoxInit() ) );
// connect table info to window
connect( mMainView, SIGNAL( filterChanged() ), this, SLOT( updateTitle() ) );
// info from table to application
connect( this, SIGNAL( saveEdits( QgsMapLayer * ) ), QgisApp::instance(), SLOT( saveEdits( QgsMapLayer * ) ) );
bool myDockFlag = settings.value( "/qgis/dockAttributeTable", false ).toBool();
if ( myDockFlag )
{
mDock = new QgsAttributeTableDock( tr( "Attribute table - %1 (%n Feature(s))", "feature count", mMainView->featureCount() ).arg( mLayer->name() ), QgisApp::instance() );
mDock->setAllowedAreas( Qt::BottomDockWidgetArea | Qt::TopDockWidgetArea );
mDock->setWidget( this );
connect( this, SIGNAL( destroyed() ), mDock, SLOT( close() ) );
QgisApp::instance()->addDockWidget( Qt::BottomDockWidgetArea, mDock );
}
columnBoxInit();
updateTitle();
mRemoveSelectionButton->setIcon( QgsApplication::getThemeIcon( "/mActionUnselectAttributes.png" ) );
mSelectedToTopButton->setIcon( QgsApplication::getThemeIcon( "/mActionSelectedToTop.png" ) );
mCopySelectedRowsButton->setIcon( QgsApplication::getThemeIcon( "/mActionCopySelected.png" ) );
mZoomMapToSelectedRowsButton->setIcon( QgsApplication::getThemeIcon( "/mActionZoomToSelected.svg" ) );
mPanMapToSelectedRowsButton->setIcon( QgsApplication::getThemeIcon( "/mActionPanToSelected.svg" ) );
mInvertSelectionButton->setIcon( QgsApplication::getThemeIcon( "/mActionInvertSelection.png" ) );
mToggleEditingButton->setIcon( QgsApplication::getThemeIcon( "/mActionToggleEditing.svg" ) );
mSaveEditsButton->setIcon( QgsApplication::getThemeIcon( "/mActionSaveEdits.svg" ) );
mDeleteSelectedButton->setIcon( QgsApplication::getThemeIcon( "/mActionDeleteSelected.svg" ) );
mOpenFieldCalculator->setIcon( QgsApplication::getThemeIcon( "/mActionCalculateField.png" ) );
mAddAttribute->setIcon( QgsApplication::getThemeIcon( "/mActionNewAttribute.png" ) );
mRemoveAttribute->setIcon( QgsApplication::getThemeIcon( "/mActionDeleteAttribute.png" ) );
mTableViewButton->setIcon( QgsApplication::getThemeIcon( "/mActionOpenTable.png" ) );
mAttributeViewButton->setIcon( QgsApplication::getThemeIcon( "/mActionPropertyItem.png" ) );
mExpressionSelectButton->setIcon( QgsApplication::getThemeIcon( "/mIconExpressionSelect.svg" ) );
mAddFeature->setIcon( QgsApplication::getThemeIcon( "/mActionNewTableRow.png" ) );
// toggle editing
bool canChangeAttributes = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::ChangeAttributeValues;
bool canDeleteFeatures = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::DeleteFeatures;
bool canAddAttributes = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::AddAttributes;
bool canDeleteAttributes = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::DeleteAttributes;
bool canAddFeatures = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::AddFeatures;
mToggleEditingButton->blockSignals( true );
mToggleEditingButton->setCheckable( true );
mToggleEditingButton->setChecked( mLayer->isEditable() );
mToggleEditingButton->setEnabled(( canChangeAttributes || canDeleteFeatures || canAddAttributes || canDeleteAttributes || canAddFeatures ) && !mLayer->isReadOnly() );
mToggleEditingButton->blockSignals( false );
mSaveEditsButton->setEnabled( mToggleEditingButton->isEnabled() && mLayer->isEditable() );
mReloadButton->setEnabled( ! mLayer->isEditable() );
mAddAttribute->setEnabled(( canChangeAttributes || canAddAttributes ) && mLayer->isEditable() );
mDeleteSelectedButton->setEnabled( canDeleteFeatures && mLayer->isEditable() );
mAddFeature->setEnabled( canAddFeatures && mLayer->isEditable() );
mAddFeature->setHidden( !canAddFeatures );
mMainViewButtonGroup->setId( mTableViewButton, QgsDualView::AttributeTable );
mMainViewButtonGroup->setId( mAttributeViewButton, QgsDualView::AttributeEditor );
// Load default attribute table filter
QgsAttributeTableFilterModel::FilterMode defaultFilterMode = ( QgsAttributeTableFilterModel::FilterMode ) settings.value( "/qgis/attributeTableBehaviour", QgsAttributeTableFilterModel::ShowAll ).toInt();
switch ( defaultFilterMode )
{
case QgsAttributeTableFilterModel::ShowVisible:
filterVisible();
break;
case QgsAttributeTableFilterModel::ShowSelected:
filterSelected();
break;
case QgsAttributeTableFilterModel::ShowAll:
default:
filterShowAll();
break;
}
mUpdateExpressionText->registerGetExpressionContextCallback( &_getExpressionContext, mLayer );
mFieldModel = new QgsFieldModel( this );
mFieldModel->setLayer( mLayer );
mFieldCombo->setModel( mFieldModel );
connect( mRunFieldCalc, SIGNAL( clicked() ), this, SLOT( updateFieldFromExpression() ) );
connect( mRunFieldCalcSelected, SIGNAL( clicked() ), this, SLOT( updateFieldFromExpressionSelected() ) );
// NW TODO Fix in 2.6 - Doesn't work with field model for some reason.
// connect( mUpdateExpressionText, SIGNAL( returnPressed() ), this, SLOT( updateFieldFromExpression() ) );
connect( mUpdateExpressionText, SIGNAL( fieldChanged( QString, bool ) ), this, SLOT( updateButtonStatus( QString, bool ) ) );
mUpdateExpressionText->setLayer( mLayer );
mUpdateExpressionText->setLeftHandButtonStyle( true );
mMainView->setView( QgsDualView::AttributeTable );
editingToggled();
}
QgsAttributeTableDialog::QgsAttributeTableDialog( QgsVectorLayer *theLayer, QWidget *parent, Qt::WindowFlags flags )
: QDialog( parent, flags )
, mDock( nullptr )
, mLayer( theLayer )
, mRubberBand( nullptr )
, mCurrentSearchWidgetWrapper( nullptr )
{
setupUi( this );
Q_FOREACH ( const QgsField& field, mLayer->fields() )
{
mVisibleFields.append( field.name() );
}
// Fix selection color on loosing focus (Windows)
setStyleSheet( QgisApp::instance()->styleSheet() );
setAttribute( Qt::WA_DeleteOnClose );
layout()->setMargin( 0 );
layout()->setContentsMargins( 0, 0, 0, 0 );
static_cast< QGridLayout* >( layout() )->setVerticalSpacing( 0 );
QSettings settings;
int size = settings.value( "/IconSize", 16 ).toInt();
if ( size > 32 )
{
size -= 16;
}
else if ( size == 32 )
{
size = 24;
}
else
{
size = 16;
}
mToolbar->setIconSize( QSize( size, size ) );
// Initialize the window geometry
restoreGeometry( settings.value( "/Windows/BetterAttributeTable/geometry" ).toByteArray() );
myDa = new QgsDistanceArea();
myDa->setSourceCrs( mLayer->crs() );
myDa->setEllipsoidalMode( QgisApp::instance()->mapCanvas()->mapSettings().hasCrsTransformEnabled() );
myDa->setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE ) );
mEditorContext.setDistanceArea( *myDa );
mEditorContext.setVectorLayerTools( QgisApp::instance()->vectorLayerTools() );
QgsFeatureRequest r;
if ( mLayer->geometryType() != QGis::NoGeometry &&
settings.value( "/qgis/attributeTableBehaviour", QgsAttributeTableFilterModel::ShowAll ).toInt() == QgsAttributeTableFilterModel::ShowVisible )
{
QgsMapCanvas *mc = QgisApp::instance()->mapCanvas();
QgsRectangle extent( mc->mapSettings().mapToLayerCoordinates( theLayer, mc->extent() ) );
r.setFilterRect( extent );
QgsGeometry *g = QgsGeometry::fromRect( extent );
mRubberBand = new QgsRubberBand( mc, QGis::Polygon );
mRubberBand->setToGeometry( g, theLayer );
delete g;
mActionShowAllFilter->setText( tr( "Show All Features In Initial Canvas Extent" ) );
}
// Initialize dual view
mMainView->init( mLayer, QgisApp::instance()->mapCanvas(), r, mEditorContext );
QgsAttributeTableConfig config = mLayer->attributeTableConfig();
mMainView->setAttributeTableConfig( config );
// Initialize filter gui elements
mFilterActionMapper = new QSignalMapper( this );
mFilterColumnsMenu = new QMenu( this );
mActionFilterColumnsMenu->setMenu( mFilterColumnsMenu );
mApplyFilterButton->setDefaultAction( mActionApplyFilter );
// Set filter icon in a couple of places
QIcon filterIcon = QgsApplication::getThemeIcon( "/mActionFilter2.svg" );
mActionShowAllFilter->setIcon( filterIcon );
mActionAdvancedFilter->setIcon( filterIcon );
mActionSelectedFilter->setIcon( filterIcon );
mActionVisibleFilter->setIcon( filterIcon );
mActionEditedFilter->setIcon( filterIcon );
// Connect filter signals
connect( mActionAdvancedFilter, SIGNAL( triggered() ), SLOT( filterExpressionBuilder() ) );
connect( mActionShowAllFilter, SIGNAL( triggered() ), SLOT( filterShowAll() ) );
connect( mActionSelectedFilter, SIGNAL( triggered() ), SLOT( filterSelected() ) );
connect( mActionVisibleFilter, SIGNAL( triggered() ), SLOT( filterVisible() ) );
connect( mActionEditedFilter, SIGNAL( triggered() ), SLOT( filterEdited() ) );
connect( mFilterActionMapper, SIGNAL( mapped( QObject* ) ), SLOT( filterColumnChanged( QObject* ) ) );
connect( mFilterQuery, SIGNAL( returnPressed() ), SLOT( filterQueryAccepted() ) );
connect( mActionApplyFilter, SIGNAL( triggered() ), SLOT( filterQueryAccepted() ) );
connect( mActionSetStyles, SIGNAL( triggered() ), SLOT( openConditionalStyles() ) );
// info from layer to table
connect( mLayer, SIGNAL( editingStarted() ), this, SLOT( editingToggled() ) );
connect( mLayer, SIGNAL( editingStopped() ), this, SLOT( editingToggled() ) );
connect( mLayer, SIGNAL( layerDeleted() ), this, SLOT( close() ) );
connect( mLayer, SIGNAL( selectionChanged() ), this, SLOT( updateTitle() ) );
connect( mLayer, SIGNAL( featureAdded( QgsFeatureId ) ), this, SLOT( updateTitle() ) );
connect( mLayer, SIGNAL( featuresDeleted( QgsFeatureIds ) ), this, SLOT( updateTitle() ) );
connect( mLayer, SIGNAL( attributeAdded( int ) ), this, SLOT( columnBoxInit() ) );
connect( mLayer, SIGNAL( attributeDeleted( int ) ), this, SLOT( columnBoxInit() ) );
// connect table info to window
connect( mMainView, SIGNAL( filterChanged() ), this, SLOT( updateTitle() ) );
connect( mMainView, SIGNAL( filterExpressionSet( QString, QgsAttributeForm::FilterType ) ), this, SLOT( formFilterSet( QString, QgsAttributeForm::FilterType ) ) );
connect( mMainView, SIGNAL( formModeChanged( QgsAttributeForm::Mode ) ), this, SLOT( viewModeChanged( QgsAttributeForm::Mode ) ) );
// info from table to application
connect( this, SIGNAL( saveEdits( QgsMapLayer * ) ), QgisApp::instance(), SLOT( saveEdits( QgsMapLayer * ) ) );
bool myDockFlag = settings.value( "/qgis/dockAttributeTable", false ).toBool();
if ( myDockFlag )
{
mDock = new QgsAttributeTableDock( tr( "%1 (%n Feature(s))", "feature count", mMainView->featureCount() ).arg( mLayer->name() ), QgisApp::instance() );
mDock->setWidget( this );
connect( this, SIGNAL( destroyed() ), mDock, SLOT( close() ) );
QgisApp::instance()->addDockWidget( Qt::BottomDockWidgetArea, mDock );
}
columnBoxInit();
updateTitle();
mActionRemoveSelection->setIcon( QgsApplication::getThemeIcon( "/mActionDeselectAll.svg" ) );
mActionSelectAll->setIcon( QgsApplication::getThemeIcon( "/mActionSelectAll.svg" ) );
mActionSelectedToTop->setIcon( QgsApplication::getThemeIcon( "/mActionSelectedToTop.svg" ) );
mActionCopySelectedRows->setIcon( QgsApplication::getThemeIcon( "/mActionEditCopy.svg" ) );
mActionPasteFeatures->setIcon( QgsApplication::getThemeIcon( "/mActionEditPaste.svg" ) );
mActionZoomMapToSelectedRows->setIcon( QgsApplication::getThemeIcon( "/mActionZoomToSelected.svg" ) );
mActionPanMapToSelectedRows->setIcon( QgsApplication::getThemeIcon( "/mActionPanToSelected.svg" ) );
mActionInvertSelection->setIcon( QgsApplication::getThemeIcon( "/mActionInvertSelection.svg" ) );
mActionToggleEditing->setIcon( QgsApplication::getThemeIcon( "/mActionToggleEditing.svg" ) );
mActionSaveEdits->setIcon( QgsApplication::getThemeIcon( "/mActionSaveEdits.svg" ) );
mActionDeleteSelected->setIcon( QgsApplication::getThemeIcon( "/mActionDeleteSelected.svg" ) );
mActionOpenFieldCalculator->setIcon( QgsApplication::getThemeIcon( "/mActionCalculateField.svg" ) );
mActionAddAttribute->setIcon( QgsApplication::getThemeIcon( "/mActionNewAttribute.svg" ) );
mActionRemoveAttribute->setIcon( QgsApplication::getThemeIcon( "/mActionDeleteAttribute.svg" ) );
mTableViewButton->setIcon( QgsApplication::getThemeIcon( "/mActionOpenTable.svg" ) );
mAttributeViewButton->setIcon( QgsApplication::getThemeIcon( "/mActionFormView.svg" ) );
mActionExpressionSelect->setIcon( QgsApplication::getThemeIcon( "/mIconExpressionSelect.svg" ) );
mActionAddFeature->setIcon( QgsApplication::getThemeIcon( "/mActionNewTableRow.svg" ) );
// toggle editing
bool canChangeAttributes = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::ChangeAttributeValues;
bool canDeleteFeatures = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::DeleteFeatures;
bool canAddAttributes = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::AddAttributes;
bool canDeleteAttributes = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::DeleteAttributes;
bool canAddFeatures = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::AddFeatures;
mActionToggleEditing->blockSignals( true );
mActionToggleEditing->setCheckable( true );
mActionToggleEditing->setChecked( mLayer->isEditable() );
mActionToggleEditing->setEnabled(( canChangeAttributes || canDeleteFeatures || canAddAttributes || canDeleteAttributes || canAddFeatures ) && !mLayer->readOnly() );
mActionToggleEditing->blockSignals( false );
mActionSaveEdits->setEnabled( mActionToggleEditing->isEnabled() && mLayer->isEditable() );
mActionReload->setEnabled( ! mLayer->isEditable() );
mActionAddAttribute->setEnabled(( canChangeAttributes || canAddAttributes ) && mLayer->isEditable() );
mActionRemoveAttribute->setEnabled( canDeleteAttributes && mLayer->isEditable() );
mActionDeleteSelected->setEnabled( canDeleteFeatures && mLayer->isEditable() );
if ( !canDeleteFeatures )
mToolbar->removeAction( mActionDeleteSelected );
mActionAddFeature->setEnabled( canAddFeatures && mLayer->isEditable() );
if ( !canAddFeatures )
mToolbar->removeAction( mActionAddFeature );
if ( canDeleteFeatures || canAddFeatures )
mToolbar->insertSeparator( mActionExpressionSelect );
mMainViewButtonGroup->setId( mTableViewButton, QgsDualView::AttributeTable );
mMainViewButtonGroup->setId( mAttributeViewButton, QgsDualView::AttributeEditor );
// Load default attribute table filter
QgsAttributeTableFilterModel::FilterMode defaultFilterMode = ( QgsAttributeTableFilterModel::FilterMode ) settings.value( "/qgis/attributeTableBehaviour", QgsAttributeTableFilterModel::ShowAll ).toInt();
switch ( defaultFilterMode )
{
case QgsAttributeTableFilterModel::ShowVisible:
filterVisible();
break;
case QgsAttributeTableFilterModel::ShowSelected:
filterSelected();
break;
case QgsAttributeTableFilterModel::ShowAll:
default:
filterShowAll();
break;
}
mUpdateExpressionText->registerGetExpressionContextCallback( &_getExpressionContext, mLayer );
mFieldCombo->setFilters( QgsFieldProxyModel::All | QgsFieldProxyModel::HideReadOnly );
mFieldCombo->setLayer( mLayer );
connect( mRunFieldCalc, SIGNAL( clicked() ), this, SLOT( updateFieldFromExpression() ) );
connect( mRunFieldCalcSelected, SIGNAL( clicked() ), this, SLOT( updateFieldFromExpressionSelected() ) );
// NW TODO Fix in 2.6 - Doesn't work with field model for some reason.
// connect( mUpdateExpressionText, SIGNAL( returnPressed() ), this, SLOT( updateFieldFromExpression() ) );
connect( mUpdateExpressionText, SIGNAL( fieldChanged( QString, bool ) ), this, SLOT( updateButtonStatus( QString, bool ) ) );
mUpdateExpressionText->setLayer( mLayer );
mUpdateExpressionText->setLeftHandButtonStyle( true );
int initialView = settings.value( "/qgis/attributeTableView", -1 ).toInt();
if ( initialView < 0 )
{
initialView = settings.value( "/qgis/attributeTableLastView", QgsDualView::AttributeTable ).toInt();
}
mMainView->setView( static_cast< QgsDualView::ViewMode >( initialView ) );
mMainViewButtonGroup->button( initialView )->setChecked( true );
connect( mActionToggleMultiEdit, SIGNAL( toggled( bool ) ), mMainView, SLOT( setMultiEditEnabled( bool ) ) );
connect( mActionSearchForm, SIGNAL( toggled( bool ) ), mMainView, SLOT( toggleSearchMode( bool ) ) );
updateMultiEditButtonState();
if ( mLayer->editFormConfig()->layout() == QgsEditFormConfig::UiFileLayout )
{
//not supported with custom UI
mActionToggleMultiEdit->setEnabled( false );
mActionToggleMultiEdit->setToolTip( tr( "Multiedit is not supported when using custom UI forms" ) );
mActionSearchForm->setEnabled( false );
mActionSearchForm->setToolTip( tr( "Search is not supported when using custom UI forms" ) );
}
editingToggled();
}
QgsAttributeTableDialog::QgsAttributeTableDialog( QgsVectorLayer *theLayer, QWidget *parent, Qt::WindowFlags flags )
: QDialog( parent, flags )
, mDock( 0 )
, mLayer( theLayer )
{
setupUi( this );
setAttribute( Qt::WA_DeleteOnClose );
QSettings settings;
// Initialize the window geometry
restoreGeometry( settings.value( "/Windows/BetterAttributeTable/geometry" ).toByteArray() );
QgsDistanceArea myDa;
myDa.setSourceCrs( mLayer->crs().srsid() );
myDa.setEllipsoidalMode( QgisApp::instance()->mapCanvas()->mapRenderer()->hasCrsTransformEnabled() );
myDa.setEllipsoid( QgsProject::instance()->readEntry( "Measure", "/Ellipsoid", GEO_NONE ) );
// Initialize dual view
mMainView->init( mLayer, QgisApp::instance()->mapCanvas(), myDa );
// Initialize filter gui elements
mFilterActionMapper = new QSignalMapper( this );
mFilterColumnsMenu = new QMenu( this );
mActionFilterColumnsMenu->setMenu( mFilterColumnsMenu );
mApplyFilterButton->setDefaultAction( mActionApplyFilter );
// Set filter icon in a couple of places
QIcon filterIcon = QgsApplication::getThemeIcon( "/mActionFilter.svg" );
mActionShowAllFilter->setIcon( filterIcon );
mActionAdvancedFilter->setIcon( filterIcon );
mActionSelectedFilter->setIcon( filterIcon );
mActionVisibleFilter->setIcon( filterIcon );
mActionEditedFilter->setIcon( filterIcon );
// Connect filter signals
connect( mActionAdvancedFilter, SIGNAL( triggered() ), SLOT( filterExpressionBuilder() ) );
connect( mActionShowAllFilter, SIGNAL( triggered() ), SLOT( filterShowAll() ) );
connect( mActionSelectedFilter, SIGNAL( triggered() ), SLOT( filterSelected() ) );
connect( mActionVisibleFilter, SIGNAL( triggered() ), SLOT( filterVisible() ) );
connect( mActionEditedFilter, SIGNAL( triggered() ), SLOT( filterEdited() ) );
connect( mFilterActionMapper, SIGNAL( mapped( QObject* ) ), SLOT( filterColumnChanged( QObject* ) ) );
connect( mFilterQuery, SIGNAL( returnPressed() ), SLOT( filterQueryAccepted() ) );
connect( mActionApplyFilter, SIGNAL( triggered() ), SLOT( filterQueryAccepted() ) );
// info from layer to table
connect( mLayer, SIGNAL( editingStarted() ), this, SLOT( editingToggled() ) );
connect( mLayer, SIGNAL( editingStopped() ), this, SLOT( editingToggled() ) );
connect( mLayer, SIGNAL( layerDeleted() ), this, SLOT( close() ) );
connect( mLayer, SIGNAL( selectionChanged() ), this, SLOT( updateTitle() ) );
connect( mLayer, SIGNAL( attributeAdded( int ) ), this, SLOT( columnBoxInit() ) );
connect( mLayer, SIGNAL( attributeDeleted( int ) ), this, SLOT( columnBoxInit() ) );
// connect table info to window
connect( mMainView, SIGNAL( filterChanged() ), this, SLOT( updateTitle() ) );
// info from table to application
connect( this, SIGNAL( saveEdits( QgsMapLayer * ) ), QgisApp::instance(), SLOT( saveEdits( QgsMapLayer * ) ) );
bool myDockFlag = settings.value( "/qgis/dockAttributeTable", false ).toBool();
if ( myDockFlag )
{
mDock = new QgsAttributeTableDock( tr( "Attribute table - %1 (%n Feature(s))", "feature count", mMainView->featureCount() ).arg( mLayer->name() ), QgisApp::instance() );
mDock->setAllowedAreas( Qt::BottomDockWidgetArea | Qt::TopDockWidgetArea );
mDock->setWidget( this );
connect( this, SIGNAL( destroyed() ), mDock, SLOT( close() ) );
QgisApp::instance()->addDockWidget( Qt::BottomDockWidgetArea, mDock );
}
columnBoxInit();
updateTitle();
mRemoveSelectionButton->setIcon( QgsApplication::getThemeIcon( "/mActionUnselectAttributes.png" ) );
mSelectedToTopButton->setIcon( QgsApplication::getThemeIcon( "/mActionSelectedToTop.png" ) );
mCopySelectedRowsButton->setIcon( QgsApplication::getThemeIcon( "/mActionCopySelected.png" ) );
mZoomMapToSelectedRowsButton->setIcon( QgsApplication::getThemeIcon( "/mActionZoomToSelected.svg" ) );
mPanMapToSelectedRowsButton->setIcon( QgsApplication::getThemeIcon( "/mActionPanToSelected.png" ) );
mInvertSelectionButton->setIcon( QgsApplication::getThemeIcon( "/mActionInvertSelection.png" ) );
mToggleEditingButton->setIcon( QgsApplication::getThemeIcon( "/mActionToggleEditing.svg" ) );
mSaveEditsButton->setIcon( QgsApplication::getThemeIcon( "/mActionSaveEdits.svg" ) );
mDeleteSelectedButton->setIcon( QgsApplication::getThemeIcon( "/mActionDeleteSelected.svg" ) );
mOpenFieldCalculator->setIcon( QgsApplication::getThemeIcon( "/mActionCalculateField.png" ) );
mAddAttribute->setIcon( QgsApplication::getThemeIcon( "/mActionNewAttribute.png" ) );
mRemoveAttribute->setIcon( QgsApplication::getThemeIcon( "/mActionDeleteAttribute.png" ) );
mTableViewButton->setIcon( QgsApplication::getThemeIcon( "/mActionOpenTable.png" ) );
mAttributeViewButton->setIcon( QgsApplication::getThemeIcon( "/mActionPropertyItem.png" ) );
mExpressionSelectButton->setIcon( QgsApplication::getThemeIcon( "/mIconExpressionSelect.svg" ) );
// toggle editing
bool canChangeAttributes = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::ChangeAttributeValues;
bool canDeleteFeatures = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::DeleteFeatures;
bool canAddAttributes = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::AddAttributes;
bool canDeleteAttributes = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::DeleteAttributes;
bool canAddFeatures = mLayer->dataProvider()->capabilities() & QgsVectorDataProvider::AddFeatures;
mToggleEditingButton->blockSignals( true );
mToggleEditingButton->setCheckable( true );
mToggleEditingButton->setChecked( mLayer->isEditable() );
mToggleEditingButton->setEnabled( canChangeAttributes && !mLayer->isReadOnly() );
mToggleEditingButton->blockSignals( false );
mSaveEditsButton->setEnabled( canChangeAttributes && mLayer->isEditable() );
mOpenFieldCalculator->setEnabled(( canChangeAttributes || canAddAttributes ) && mLayer->isEditable() );
mDeleteSelectedButton->setEnabled( canDeleteFeatures && mLayer->isEditable() );
mAddAttribute->setEnabled( canAddAttributes && mLayer->isEditable() );
mRemoveAttribute->setEnabled( canDeleteAttributes && mLayer->isEditable() );
mAddFeature->setEnabled( canAddFeatures && mLayer->isEditable() && mLayer->geometryType() == QGis::NoGeometry );
mAddFeature->setHidden( !canAddFeatures || mLayer->geometryType() != QGis::NoGeometry );
mMainViewButtonGroup->setId( mTableViewButton, QgsDualView::AttributeTable );
mMainViewButtonGroup->setId( mAttributeViewButton, QgsDualView::AttributeEditor );
// Load default attribute table filter
QgsAttributeTableFilterModel::FilterMode defaultFilterMode = ( QgsAttributeTableFilterModel::FilterMode ) settings.value( "/qgis/attributeTableBehaviour", QgsAttributeTableFilterModel::ShowAll ).toInt();
switch ( defaultFilterMode )
{
case QgsAttributeTableFilterModel::ShowVisible:
filterVisible();
break;
case QgsAttributeTableFilterModel::ShowSelected:
filterSelected();
break;
case QgsAttributeTableFilterModel::ShowAll:
default:
filterShowAll();
break;
}
}
void ProcAttachPS::slotPSDone()
{
filterEdited(filterEdit->text());
}