C++ (Cpp) of_board_is_mtpの例

コード例 #1

0

ファイルを表示

ファイル: board-8226-gpiomux.c プロジェクト: 1041574425/Z5S_NX503A_130_kernel

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_install(msm_synaptics_configs,
			ARRAY_SIZE(msm_synaptics_configs));
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
}

コード例 #2

0

ファイルを表示

ファイル: board-8926-x5-open-gpiomux.c プロジェクト: TeamRegular/android_kernel_lge_e2nxx-stock

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_install(msm_synaptics_configs,
			ARRAY_SIZE(msm_synaptics_configs));
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
	msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#ifndef CONFIG_MACH_LGE
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif


/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
}

コード例 #3

0

ファイルを表示

ファイル: board-8226-gpiomux.c プロジェクト: 1801648284/Xiaomi_Kernel_OpenSource

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	msm_gpiomux_install(hs_uart_sw_configs, ARRAY_SIZE(hs_uart_sw_configs));

	msm_gpiomux_sdc3_install();

	msm_gpiomux_extovp_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}

コード例 #4

0

ファイルを表示

ファイル: board-8926-x10-vzw-gpiomux.c プロジェクト: TeamRegular/android_kernel_lge_e2nxx-stock

void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	int gpio_index = 0;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#ifdef CONFIG_MACH_LGE

	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via X5
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.WLC>>
	// GPIO related function <<17.SIM>>
	// GPIO related function <<18.SLIMBUS>>
	// GPIO related function <<19.RF>>
	// GPIO related function <<20.KEY PAD>>
	// GPIO related function <<21.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch ( hw_rev ){
		case HW_REV_0 :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_A :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_B :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_C :
		case HW_REV_D :
		case HW_REV_E :
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
	}
	
	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(gpio_func_sensor_configs, ARRAY_SIZE(gpio_func_sensor_configs));
	msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
	
	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(gpio_func_i2c_configs, ARRAY_SIZE(gpio_func_i2c_configs));
	
	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	if(hw_rev == HW_REV_0) {
		msm_gpiomux_install(msm_synaptics_configs, ARRAY_SIZE(msm_synaptics_configs));
		printk(KERN_ERR "[Touch] synaptics msm_gpiomux_install HW_REV_A configs rev : %d\n", hw_rev);
	} else {
		msm_gpiomux_install(msm_atmel_s540_configs, ARRAY_SIZE(msm_atmel_s540_configs));
		printk(KERN_ERR "[Touch] atmel msm_gpiomux_install HW_REV_A configs rev : %d\n", hw_rev);
	}

	// GPIO related function <<5.NFC>>
/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */

	// GPIO related function <<6.LCD>>
	msm_gpiomux_install(gpio_func_lcd_configs,
			ARRAY_SIZE(gpio_func_lcd_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs, ARRAY_SIZE(msm_lcd_configs));
	
	// GPIO related function <<7.CAMERA>>	
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
	
	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>

	// GPIO related function <<11.SD CARD>>
	msm_gpiomux_install(&sd_card_det, 1);

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(gpio_func_battery_configs, ARRAY_SIZE(gpio_func_battery_configs));	
	
	// GPIO related function <<13.BT>>
	msm_gpiomux_install(gpio_func_bt_configs, ARRAY_SIZE(gpio_func_bt_configs));
	
	// GPIO related function <<14.WIFI>>
#if defined ( CONFIG_BCMDHD ) || defined ( CONFIG_BCMDHD_MODULE )
#else
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
	
	// GPIO related function <<15.FM>>
	msm_gpiomux_install(gpio_func_fm_configs, ARRAY_SIZE(gpio_func_fm_configs));
	
	// GPIO related function <<16.WLC>>
	msm_gpiomux_install(gpio_func_wlc_configs, ARRAY_SIZE(gpio_func_wlc_configs));
	
	// GPIO related function <<17.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
	
	// GPIO related function <<18.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
	
	// GPIO related function <<19.RF>>
	msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
	
	// GPIO related function <<20.KEY PAD>>
	msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
	
	// GPIO related function <<21.LOGIC>>
	msm_gpiomux_install(gpio_func_logic_configs, ARRAY_SIZE(gpio_func_logic_configs));
#endif

#ifndef CONFIG_MACH_LGE	
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));


	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [BT][[email protected]], 2013-05-13 */
#ifdef CONFIG_LGE_BLUETOOTH
    bluetooth_msm_gpiomux_install();
#endif /* CONFIG_LGE_BLUETOOTH */
/* LGE_CHANGE_E, [BT][[email protected]], 2013-05-13 */
msm_gpiomux_install(msm_auxpcm_configs,
		ARRAY_SIZE(msm_auxpcm_configs));

#if 0//defined(CONFIG_TSPDRV)
	msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif

    msm_gpiomux_sdc3_install();
}

コード例 #5

0

ファイルを表示

ファイル: board-8974-sec-kactive-gpiomux.c プロジェクト: Hashcode/android_kernel_samsung_hlte

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
#if !defined(CONFIG_BT_BCM4354)
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if defined(CONFIG_BT_BCM4354)
	msm_gpiomux_btuart_install();
#endif
#if defined(CONFIG_WCNSS_CORE)
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	if (system_rev >= 4)
		msm_gpiomux_install(es705_config, ARRAY_SIZE(es705_config));
	
	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(msm_sensor_configs_dragonboard, \
				ARRAY_SIZE(msm_sensor_configs_dragonboard));
	else
		msm_gpiomux_install(msm_sensor_configs, \
				ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);

	if (machine_is_apq8074() && (of_board_is_liquid() || \
	    of_board_is_dragonboard()))
		msm_gpiomux_sdc3_install();

#if !defined(CONFIG_WCNSS_CORE)
	msm_gpiomux_sdc3_install();
#endif

	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	if (system_rev < 4)
		msm_gpiomux_install(msm_es705_config, ARRAY_SIZE(msm_es705_config));
#if !defined(CONFIG_TDMB)
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#ifdef CONFIG_GPIO_MC5587
		msm_gpiomux_install(msm8974_gpioexpander_configs,
				ARRAY_SIZE(msm8974_gpioexpander_configs));
#endif

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#ifdef CONFIG_VIDEO_MHL_V2
	msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif
#ifdef CONFIG_FB_MSM_MDSS_HDMI_MHL_SII8334
	if (of_board_is_fluid())
		msm_gpiomux_install(msm_mhl_configs,
				    ARRAY_SIZE(msm_mhl_configs));
#endif

	if (of_board_is_liquid() ||
	    (of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

	if (of_board_is_cdp())
		msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));
	else if (of_board_is_liquid() || of_board_is_fluid() ||
						of_board_is_mtp())
		msm_gpiomux_install(msm_epm_configs,
				ARRAY_SIZE(msm_epm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

#if !defined(CONFIG_BT_BCM4354)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

	msm_gpiomux_install(fuel_i2c_config,
			ARRAY_SIZE(fuel_i2c_config));

#if defined(CONFIG_SENSORS_SSP)
		msm_gpiomux_install(ssp_configs, ARRAY_SIZE(ssp_configs));
#endif
#ifdef CONFIG_SENSORS_VFS61XX
	msm_gpiomux_install(msm8974_fingerprint_configs,
		ARRAY_SIZE(msm8974_fingerprint_configs));
#endif
#if defined(CONFIG_NFC_PN547) || defined(CONFIG_BCM2079X_NFC_I2C)
		msm_gpiomux_install(msm_nfc_configs,
			ARRAY_SIZE(msm_nfc_configs));
#endif

		msm_gpiomux_install(msm_cis_spi_configs,
			ARRAY_SIZE(msm_cis_spi_configs));
		msm_gpiomux_install(msm_af_configs,
			ARRAY_SIZE(msm_af_configs));
	msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));

}

コード例 #6

0

ファイルを表示

ファイル: board-8926-g2m-kr-gpiomux.c プロジェクト: TeamRegular/android_kernel_lge_e2nxx-stock

void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	//int gpio_index = 0;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	// GPIO related function <<7.CAMERA>>
/* LGE_CHANGE_S, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
	msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
	printk(KERN_ERR " [Camera] In greater than HW_REV_B, MAIN_CAM0_RESET_N has been changed from GPIO_98 to GPIO_114\n");
/* LGE_CHANGE_E, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */


	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs,
			ARRAY_SIZE(gpio_func_flash_led_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

	if (hw_rev == HW_REV_0) {
		msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));
		printk(KERN_ERR "[Touch] HW_REV_0 \n");
	} else if (hw_rev == HW_REV_A) {
		msm_gpiomux_install(msm_melfas_configs_rev_a, ARRAY_SIZE(msm_melfas_configs_rev_a));
		printk(KERN_ERR "[Touch] HW_REV_A \n");
	} else {
		msm_gpiomux_install(msm_atmel_configs_rev_b, ARRAY_SIZE(msm_atmel_configs_rev_b));
		printk(KERN_ERR "[Touch] HW_REV_B or above \n");
	}

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
	msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#ifndef CONFIG_MACH_LGE
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif


/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */

#if defined(CONFIG_TSPDRV)
	msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif

}

コード例 #7

0

ファイルを表示

ファイル: board-8926-f60s-jp-gpiomux.c プロジェクト: Rashed97/lge_d295

void __init msm8226_init_gpiomux(void)
{
	int rc;
	int gpio_index = 0;

	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via JAGUAR
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.WLC>>
	// GPIO related function <<17.SIM>>
	// GPIO related function <<18.SLIMBUS>>
	// GPIO related function <<19.RF>>
	// GPIO related function <<20.KEY PAD>>
	// GPIO related function <<21.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch ( hw_rev ){
		case HW_REV_0 :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_zero[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_zero[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_A :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_B :
				for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
					gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
					msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_C :
		case HW_REV_D :
		case HW_REV_E :
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
	}

	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(msm_sensor_ic_configs, ARRAY_SIZE(msm_sensor_ic_configs));	

	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(msm_i2c_configs, ARRAY_SIZE(msm_i2c_configs));

	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	if (hw_rev == HW_REV_0) {
		msm_gpiomux_install(msm_atmel_configs, ARRAY_SIZE(msm_atmel_configs));
		printk(KERN_ERR "[Touch] HW_REV_0 configs \n");

	} else {
		msm_gpiomux_install(msm_synaptics_configs_rev_b, ARRAY_SIZE(msm_synaptics_configs_rev_b));
		printk(KERN_ERR "[Touch] HW_REV_A.. configs \n");
	}

	// GPIO related function <<5.NFC>>
/*                                                       */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*                                                       */

	// GPIO related function <<6.LCD>>
	if (hw_rev <= HW_REV_A)
		msm_gpiomux_install_nowrite(msm_lcd_configs_A,
				ARRAY_SIZE(msm_lcd_configs_A));
	else
		msm_gpiomux_install_nowrite(msm_lcd_configs_B,
				ARRAY_SIZE(msm_lcd_configs_B));

	// GPIO related function <<7.CAMERA>>
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>

	// GPIO related function <<11.SD CARD>>
	msm_gpiomux_sdc3_install();

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(power_configs, ARRAY_SIZE(power_configs));
	
	// GPIO related function <<13.BT>>
#ifdef CONFIG_LGE_BLUETOOTH
    bluetooth_msm_gpiomux_install();
#endif /*                      */

	// GPIO related function <<14.WIFI>>
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
#else
	if (hw_rev == HW_REV_0)
		msm_gpiomux_install(wcnss_5wire_interface_zero,
					ARRAY_SIZE(wcnss_5wire_interface_zero));
	else
		msm_gpiomux_install(wcnss_5wire_interface_A,
					ARRAY_SIZE(wcnss_5wire_interface_A));
#endif
	
	// GPIO related function <<15.FM>>
	msm_gpiomux_install(msm_auxpcm_configs,	ARRAY_SIZE(msm_auxpcm_configs));

	// GPIO related function <<16.WLC>>
	
	// GPIO related function <<17.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
	
	// GPIO related function <<18.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
	
	// GPIO related function <<19.RF>>
	msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
	
	// GPIO related function <<20.KEY PAD>>
	msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
	
	// GPIO related function <<21.LOGIC>>
	logic_msm_gpiomux_install();

/*                                                           */
#if defined(CONFIG_LGE_BROADCAST_TDMB)
	msm_gpiomux_install(msm8926_tdmb_configs, ARRAY_SIZE(msm8926_tdmb_configs));
#endif
/*                                                           */

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

#ifndef CONFIG_MACH_LGE
	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif
}

コード例 #8

0

ファイルを表示

ファイル: board-8974-gpiomux.c プロジェクト: AICP/kernel_moto_shamu

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_debug("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
		socinfo_get_version());
	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
	if (of_board_is_liquid())
		msm_gpiomux_install(msm_touch_i2cmode_configs,
					ARRAY_SIZE(msm_touch_i2cmode_configs));
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(msm_sensor_configs_dragonboard, \
				ARRAY_SIZE(msm_sensor_configs_dragonboard));
	else
		msm_gpiomux_install(msm_sensor_configs, \
				ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);

	if (machine_is_apq8074() && (of_board_is_liquid() || \
	    of_board_is_dragonboard()))
		msm_gpiomux_sdc3_install();

	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	if (of_board_is_fluid())
		msm_gpiomux_install(msm_mhl_configs,
				    ARRAY_SIZE(msm_mhl_configs));

	if (of_board_is_liquid() ||
	    (of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

	if (of_board_is_cdp())
		msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));
	else if (of_board_is_liquid() || of_board_is_fluid() ||
						of_board_is_mtp())
		msm_gpiomux_install(msm_epm_configs,
				ARRAY_SIZE(msm_epm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

	if ((socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_INTERPOSERV3)
		&& of_board_is_cdp())
		msm_gpiomux_install(apq8074_interposer_config,
			ARRAY_SIZE(apq8074_interposer_config));
}

コード例 #9

0

ファイルを表示

ファイル: board-8974-sec-lt03-gpiomux.c プロジェクト: Jackeagle/android_kernel_sm_g800h_kk

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
		socinfo_get_version());
	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#ifdef CONFIG_MFD_MAX77888
	msm_gpiomux_install(msm8974_muic_configs, ARRAY_SIZE(msm8974_muic_configs));
#endif
	msm_gpiomux_install(msm_battery_configs, ARRAY_SIZE(msm_battery_configs));
#if !defined(CONFIG_MACH_LT03_LTE)	
	msm_gpiomux_install(msm_batteryotg_configs, ARRAY_SIZE(msm_batteryotg_configs));
#endif	

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
	msm_gpiomux_btuart_install();
	msm_gpiomux_btwake_install();
#endif

	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(msm_sensor_configs_dragonboard, \
				ARRAY_SIZE(msm_sensor_configs_dragonboard));
	else
		msm_gpiomux_install(msm_sensor_configs, \
				ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();

	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	msm_gpiomux_install(ear_send_end_config, ARRAY_SIZE(ear_send_end_config));
#if defined(CONFIG_MACH_LT03_VZW) || defined(CONFIG_MACH_LT03_EUR) || defined(CONFIG_MACH_LT03_TMO) \
|| defined(CONFIG_MACH_LT03SKT) || defined(CONFIG_MACH_LT03KTT) || defined(CONFIG_MACH_LT03LGT)
	msm_gpiomux_install(spk_ext_config, ARRAY_SIZE(spk_ext_config));
#endif

	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#ifdef CONFIG_VIDEO_MHL_V2
	msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif

#if 0
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
	if (of_board_is_liquid() ||
	    (of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */

#ifdef CONFIG_USB_SWITCH_FSA9485
	if (system_rev >= 7)
		msm_gpiomux_install(lt03_r04_muic_configs,
				ARRAY_SIZE(lt03_r04_muic_configs));
	else
		msm_gpiomux_install(lt03_muic_configs,
				ARRAY_SIZE(lt03_muic_configs));
#endif

	if (of_board_is_cdp()) {
#if 0 /* Not used at Mondrian */
		msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));
#endif
	} else if (of_board_is_liquid() || of_board_is_fluid() ||
						of_board_is_mtp())
		msm_gpiomux_install(msm_epm_configs,
				ARRAY_SIZE(msm_epm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

#ifdef CONFIG_FB_MSM_EDP_SAMSUNG
	msm_gpiomux_install(msm8974_lcd_config,
				ARRAY_SIZE(msm8974_lcd_config));
#endif
#ifdef CONFIG_INPUT_WACOM
	msm_gpiomux_install(msm8974_wacom_configs,
			ARRAY_SIZE(msm8974_wacom_configs));
#endif
	msm_gpiomux_install(msm_grip_configs, ARRAY_SIZE(msm_grip_configs));
	msm_gpiomux_install(msm_sensors_configs, ARRAY_SIZE(msm_sensors_configs));

#if defined(CONFIG_MACH_LT03_VZW) || defined(CONFIG_MACH_LT03SKT) || defined(CONFIG_MACH_LT03KTT) || defined(CONFIG_MACH_LT03LGT)
	msm_gpiomux_install(ext_buck_configs, ARRAY_SIZE(ext_buck_configs));
#endif

#if defined(CONFIG_MACH_LT03_LTE)
	msm_gpiomux_install(gpio_nc_configs,ARRAY_SIZE(gpio_nc_configs));
#endif

}

コード例 #10

0

ファイルを表示

ファイル: board-8926-e2-mpcs-gpiomux.c プロジェクト: TeamRegular/android_kernel_lge_e2nxx-stock

void __init msm8226_init_gpiomux(void)
{
	int rc;
	int gpio_index = 0;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via JAGUAR
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.WLC>>
	// GPIO related function <<17.SIM>>
	// GPIO related function <<18.SLIMBUS>>
	// GPIO related function <<19.RF>>
	// GPIO related function <<20.KEY PAD>>
	// GPIO related function <<21.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch ( hw_rev ){
		case HW_REV_0 :
#if 0
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_zero[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_zero[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
#endif
			break;
		case HW_REV_A :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_B :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_C :
		case HW_REV_D :
		case HW_REV_E :
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
	}

	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(msm_sensor_ic_configs, ARRAY_SIZE(msm_sensor_ic_configs));

	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(msm_i2c_configs, ARRAY_SIZE(msm_i2c_configs));

	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	if (hw_rev >= HW_REV_A) {
		msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		printk(KERN_ERR "[Touch] HW_REV_A configs \n");
	}

	// GPIO related function <<5.NFC>>
/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN544_C3
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */

	// GPIO related function <<6.LCD>>
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	// GPIO related function <<7.CAMERA>>
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>

	// GPIO related function <<11.SD CARD>>
	msm_gpiomux_sdc3_install();

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(power_configs, ARRAY_SIZE(power_configs));

	// GPIO related function <<13.BT>>
#ifdef CONFIG_LGE_BLUETOOTH
    bluetooth_msm_gpiomux_install();
#endif /* CONFIG_LGE_BLUETOOTH */

	// GPIO related function <<14.WIFI>>
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	// GPIO related function <<15.FM>>
	msm_gpiomux_install(msm_auxpcm_configs,	ARRAY_SIZE(msm_auxpcm_configs));

	// GPIO related function <<16.WLC>>
	msm_gpiomux_install(&gpio_func_wlc_config, 1);

	// GPIO related function <<17.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));

	// GPIO related function <<18.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));

	// GPIO related function <<19.RF>>
	msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));

	// GPIO related function <<20.KEY PAD>>
	msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));

	// GPIO related function <<21.LOGIC>>
	msm_gpiomux_install(ext_ldo_en_configs, ARRAY_SIZE(ext_ldo_en_configs));

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

#ifndef CONFIG_MACH_LGE
	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

#ifdef CONFIG_SND_BRCM_FM_RADIO
	msm_gpiomux_install(msm_pri_mi2s_configs, ARRAY_SIZE(msm_pri_mi2s_configs));
#endif
}

コード例 #11

0

ファイルを表示

ファイル: board-hestia-gpiomux.c プロジェクト: Jackeagle/android_kernel_sm_g800h_kk

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

/* Battery charging and BMS GPIO */
	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));

	msm_gpiomux_install(msm_hrm_configs,
		ARRAY_SIZE(msm_hrm_configs));

	msm_gpiomux_install(msm_sensorhub_configs,
		ARRAY_SIZE(msm_sensorhub_configs));

	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));

		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	/*
	 * gpio mux settings for the NC GPIOs
	 */
	msm_gpiomux_install(nc_gpio_cfgs,
			ARRAY_SIZE(nc_gpio_cfgs));

	msm_gpiomux_install(hw_chkbits_cfg, ARRAY_SIZE(hw_chkbits_cfg));
	msm_gpiomux_sdc3_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
		msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
#endif
}

コード例 #12

0

ファイルを表示

void __init msm8226_init_gpiomux(void)
{
    int rc;
#ifdef CONFIG_MACH_LGE
    int gpio_index = 0;
    hw_rev_type hw_rev;
    hw_rev = lge_get_board_revno();
#endif

    // Device Tree Initailize
    rc = msm_gpiomux_init_dt();
    if (rc) {
        pr_err("%s failed %d\n", __func__, rc);
        return;
    }
#ifdef CONFIG_MACH_LGE

    //--------------------------------------------
    // MSM8X26 GPIO Confiuration via W7 Rev 0
    //--------------------------------------------
    // GPIO related function <<0.Resreved Pin>>
    // GPIO related function <<1.SENSOR>>
    // GPIO related function <<2.I2C>>
    // GPIO related function <<3.UART>>
    // GPIO related function <<4.TOUCH>>
    // GPIO related function <<5.NFC>>
    // GPIO related function <<6.LCD>>
    // GPIO related function <<7.CAMERA>>
    // GPIO related function <<8.FLASH LED>>
    // GPIO related function <<9.IRRC>>
    // GPIO related function <<10.AUDIO>>
    // GPIO related function <<11.SD CARD>>
    // GPIO related function <<12.BATTERY>>
    // GPIO related function <<13.BT>>
    // GPIO related function <<14.WIFI>>
    // GPIO related function <<15.FM>>
    // GPIO related function <<16.SIM>>
    // GPIO related function <<17.SLIMBUS>>
    // GPIO related function <<18.RF>>
    // GPIO related function <<19.KEY PAD>>
    // GPIO related function <<20.LOGIC>>

    /* Moved to the last of this function */
#if 0
    // GPIO related function <<0.Resreved Pin>>
    switch ( hw_rev ) {
    case HW_REV_0 :
        for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
            gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
            msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
        }
        break;
    case HW_REV_A :
        for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
            gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
            msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
        }
        break;
    case HW_REV_B :
    case HW_REV_C :
    case HW_REV_D :
        for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
            gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
            msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
        }
        break;
    case HW_REV_E :
    case HW_REV_1_0 :
    case HW_REV_1_1 :
    default :
        for ( gpio_index = 0 ; gpio_reserved_pin_rev_E[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
            gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_E[gpio_index];
            msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
        }
        break;
    }
#endif // 0

    // GPIO related function <<1.SENSOR>>
    msm_gpiomux_install(gpio_func_sensor_configs,
                        ARRAY_SIZE(gpio_func_sensor_configs));

    msm_gpiomux_install(msm_hall_ic_configs,
                        ARRAY_SIZE(msm_hall_ic_configs));

    // GPIO related function <<2.I2C>>
    msm_gpiomux_install(gpio_func_i2c_configs,
                        ARRAY_SIZE(gpio_func_i2c_configs));

    // GPIO related function <<3.UART>>
    msm_gpiomux_install(gpio_func_uart_configs,
                        ARRAY_SIZE(gpio_func_uart_configs));

    // GPIO related function <<4.TOUCH>>
    msm_gpiomux_install(msm_atmel_configs, ARRAY_SIZE(msm_atmel_configs));
    printk(KERN_ERR " [Touch] HW_REV for Atmel Touch IC \n");

    // GPIO related function <<5.NFC>>
    /*                                                      */
#ifdef CONFIG_LGE_NFC_PN547
    msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
    /*                                                      */


    // GPIO related function <<6.LCD>>
    //msm_gpiomux_install(msm_lcd_configs_rev_0, ARRAY_SIZE(msm_lcd_configs_rev_0));

    //msm_gpiomux_install(msm_bl_configs_rev_0, ARRAY_SIZE(msm_bl_configs_rev_0));

    // GPIO related function <<7.CAMERA>>
    msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

    // GPIO related function <<8.FLASH LED>>
    msm_gpiomux_install(gpio_func_flash_led_configs,
                        ARRAY_SIZE(gpio_func_flash_led_configs));

    // GPIO related function <<10.AUDIO>>
    msm_gpiomux_install(gpio_func_audio_configs,
                        ARRAY_SIZE(gpio_func_audio_configs));

    // GPIO related function <<11.SD CARD>>
    msm_gpiomux_install(&sd_card_det, 1);

    // GPIO related function <<12.BATTERY>>
    msm_gpiomux_install(gpio_func_battery_configs,
                        ARRAY_SIZE(gpio_func_battery_configs));

    // GPIO related function <<13.BT>>
    msm_gpiomux_install(gpio_func_bt_configs,
                        ARRAY_SIZE(gpio_func_bt_configs));

    // GPIO related function <<14.WIFI>>
    msm_gpiomux_install(wcnss_5wire_interface,
                        ARRAY_SIZE(wcnss_5wire_interface));

    // GPIO related function <<15.FM>>
    msm_gpiomux_install(gpio_func_fm_configs,
                        ARRAY_SIZE(gpio_func_fm_configs));

    // GPIO related function <<16.SIM>>
    msm_gpiomux_install(gpio_func_sim_configs,
                        ARRAY_SIZE(gpio_func_sim_configs));

    // GPIO related function <<17.SLIMBUS>>
    msm_gpiomux_install(gpio_func_slimbus_configs,
                        ARRAY_SIZE(gpio_func_slimbus_configs));

    // GPIO related function <<18.RF>>
    msm_gpiomux_install(gpio_func_rf_configs,
                        ARRAY_SIZE(gpio_func_rf_configs));

    // GPIO related function <<19.KEY PAD>>
    if ( hw_rev >= HW_REV_A )
        msm_gpiomux_install(msm_keypad_configs_rev_a,
                            ARRAY_SIZE(msm_keypad_configs_rev_a));
    else
        msm_gpiomux_install(msm_keypad_configs,
                            ARRAY_SIZE(msm_keypad_configs));

    // GPIO related function <<20.LOGIC>>
    msm_gpiomux_install(gpio_func_logic_configs,
                        ARRAY_SIZE(gpio_func_logic_configs));

#endif

#ifndef CONFIG_MACH_LGE
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
    msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

    msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

    msm_gpiomux_install(msm_auxpcm_configs,
                        ARRAY_SIZE(msm_auxpcm_configs));

    if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
        msm_gpiomux_install(usb_otg_sw_configs,
                            ARRAY_SIZE(usb_otg_sw_configs));
#endif

    /* Applied Rev_E board changes */
    if( hw_rev >= HW_REV_E )
    {
        msm_gpiomux_install(pcb_indicator_configs, ARRAY_SIZE(pcb_indicator_configs));
        msm_gpiomux_install(radiation_pwr_ant_configs, ARRAY_SIZE(radiation_pwr_ant_configs));
        msm_gpiomux_install(vt_maker_id_configs, ARRAY_SIZE(vt_maker_id_configs));
    }

    /* Moved from the top of this function */
    // GPIO related function <<0.Resreved Pin>>
    switch ( hw_rev ) {
    case HW_REV_0 :
        for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
            gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
            msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
        }
        break;
    case HW_REV_A :
        for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
            gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
            msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
        }
        break;
    case HW_REV_B :
    case HW_REV_C :
    case HW_REV_D :
        for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
            gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
            msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
        }
        break;
    case HW_REV_E :
    case HW_REV_1_0 :
    case HW_REV_1_1 :
    default :
        for ( gpio_index = 0 ; gpio_reserved_pin_rev_E[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ) {
            gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_E[gpio_index];
            msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
        }
        break;
    }
}

コード例 #13

0

ファイルを表示

ファイル: board-mega2-gpiomux.c プロジェクト: adis1313/android_kernel_samsung_msm8974

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));

	msm_gpiomux_install(muic_gpio_config, ARRAY_SIZE(muic_gpio_config));

	msm_gpiomux_install(tkey_led_gpio_configs, ARRAY_SIZE(tkey_led_gpio_configs));

	/* Cover ID */
	msm_gpiomux_install(msm_cover_id_configs,
		ARRAY_SIZE(msm_cover_id_configs));

	msm_gpiomux_install(hw_chk_bit_configs, ARRAY_SIZE(hw_chk_bit_configs));

	msm_gpiomux_install(tsp_id_configs, ARRAY_SIZE(tsp_id_configs));

#if defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif

	/*
	 * gpio mux settings for the NC GPIOs
	 */
	msm_gpiomux_install(gpio_nc_configs,
			ARRAY_SIZE(gpio_nc_configs));

#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98505
	msm_gpiomux_install(msm8226_max98504_i2c_configs,ARRAY_SIZE(msm8226_max98504_i2c_configs));
#endif
#ifdef CONFIG_LEDS_KTD2026
	msm_gpiomux_install(msm_ktd2026_i2c_configs,ARRAY_SIZE(msm_ktd2026_i2c_configs));
#endif
}

コード例 #14

0

ファイルを表示

ファイル: board-degas-gpiomux.c プロジェクト: Illusion-MOD/SM-G710K_Illusion_kernel

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_melfas_configs,
				ARRAY_SIZE(msm_melfas_configs));
#if !defined(CONFIG_MACH_DEGASLTE_SBM)
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));
#endif
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

#if defined (CONFIG_SEC_DEGASLTE_COMMON)
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
#if !defined(CONFIG_MACH_DEGASLTE_SBM)
	msm_gpiomux_install(irled_i2c_scl_config, ARRAY_SIZE(irled_i2c_scl_config));
#endif
	msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
#endif
	msm_gpiomux_sdc3_install();


	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
	msm_gpiomux_install(msm_ta_int_n_configs, ARRAY_SIZE(msm_ta_int_n_configs));
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
	if(!poweroff_charging)
		msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));
#ifdef CONFIG_SND_SOC_MAX98504
	msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
	msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
	msm_gpiomux_install(msm8226_amp_int_configs,ARRAY_SIZE(msm8226_amp_int_configs));
#endif
#if defined (CONFIG_MACH_DEGASLTE_SPR) || defined(CONFIG_MACH_DEGASLTE_VZW) || defined(CONFIG_MACH_DEGASLTE_SBM)
	msm_gpiomux_install(degaslte_spr_nc_gpios, ARRAY_SIZE(degaslte_spr_nc_gpios));
	msm_gpiomux_install(degasltespr_gpio_10, ARRAY_SIZE(degasltespr_gpio_10));
#endif

#if defined(CONFIG_MACH_DEGASLTE_SBM)
	msm_gpiomux_install(degaslte_sbm_gpios, ARRAY_SIZE(degaslte_sbm_gpios));
#endif
}

コード例 #15

0

ファイルを表示

ファイル: board-8974-sec-mondrian-gpiomux.c プロジェクト: Hashcode/android_kernel_samsung_hlte

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
		socinfo_get_version());
	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
	msm_gpiomux_btuart_install();
#endif

	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));
#ifdef CONFIG_SENSORS_GP2A_IIO_PROX
	msm_gpiomux_install(msm_proximity_configs, ARRAY_SIZE(msm_proximity_configs));
#endif
	msm_gpiomux_install(msm_mag_sensor_configs, ARRAY_SIZE(msm_mag_sensor_configs));

		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(msm_sensor_configs_dragonboard, \
				ARRAY_SIZE(msm_sensor_configs_dragonboard));
	else
		msm_gpiomux_install(msm_sensor_configs, \
				ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);

	msm_gpiomux_install(msm_disp_configs, ARRAY_SIZE(msm_disp_configs));

	if (machine_is_apq8074() && (of_board_is_liquid() || \
	    of_board_is_dragonboard()))
		msm_gpiomux_sdc3_install();

	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	msm_gpiomux_install(tx_gtr_thres_enable_config, ARRAY_SIZE(tx_gtr_thres_enable_config));
	msm_gpiomux_install(speaker_enable_config, ARRAY_SIZE(speaker_enable_config));
	msm_gpiomux_install(ear_send_end_config, ARRAY_SIZE(ear_send_end_config));
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	if (of_board_is_liquid() ||
	    (of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

	if (of_board_is_cdp()) {
#if 0 /* Not used at Mondrian */
		msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));
#endif
	} else if (of_board_is_liquid() || of_board_is_fluid() ||
						of_board_is_mtp())
		msm_gpiomux_install(msm_epm_configs,
				ARRAY_SIZE(msm_epm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));
			
	msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));

}

コード例 #16

0

ファイルを表示

ファイル: board-8226-w7dsn-global-com-gpiomux.c プロジェクト: MobiusM/MobiusMarshmallowKernel

void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	int gpio_index = 0;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#ifdef CONFIG_MACH_LGE

	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via W7 Rev 0
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.SIM>>
	// GPIO related function <<17.SLIMBUS>>
	// GPIO related function <<18.RF>>
	// GPIO related function <<19.KEY PAD>>
	// GPIO related function <<20.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch ( hw_rev ){
		case HW_REV_0 :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_A :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_B :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_C :
		case HW_REV_D :
		case HW_REV_E :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_E[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_E[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_E[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_E[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
	}

	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(gpio_func_sensor_configs,
			ARRAY_SIZE(gpio_func_sensor_configs));

	msm_gpiomux_install(msm_hall_ic_configs,
			ARRAY_SIZE(msm_hall_ic_configs));

	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(gpio_func_i2c_configs,
			ARRAY_SIZE(gpio_func_i2c_configs));

	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs,
			ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	if(hw_rev == HW_REV_0) {
		msm_gpiomux_install(msm_synaptics_configs, ARRAY_SIZE(msm_synaptics_configs));
		printk(KERN_ERR "[Touch] below HW_REV_0 is using Synaptics \n");
	}
	else if(hw_rev == HW_REV_A) {
		msm_gpiomux_install(msm_melfas_configs_rev_a, ARRAY_SIZE(msm_melfas_configs_rev_a));
		printk(KERN_ERR "[Touch] HW_REV_A configs \n");
	}
	else if(hw_rev == HW_REV_B){
		msm_gpiomux_install(msm_melfas_configs_rev_b, ARRAY_SIZE(msm_melfas_configs_rev_b));
		printk(KERN_ERR "[Touch] HW_REV_B configs \n");
	}
	else if(hw_rev < HW_REV_E){
		msm_gpiomux_install(msm_melfas_configs_rev_c, ARRAY_SIZE(msm_melfas_configs_rev_c));
		printk(KERN_ERR "[Touch] HW_REV_C configs \n");
	}
	else {
		msm_gpiomux_install(msm_atmel_configs_rev_e, ARRAY_SIZE(msm_atmel_configs_rev_e));
		printk(KERN_ERR " [Touch] HW_REV_E or above use Atmel \n");
	}

	// GPIO related function <<5.NFC>>
	/*	LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
	/*	LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */


	// GPIO related function <<6.LCD>>
	msm_gpiomux_install(gpio_func_lcd_configs,
			ARRAY_SIZE(gpio_func_lcd_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	// GPIO related function <<7.CAMERA>>
/* LGE_CHANGE_S, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */
	if(hw_rev == HW_REV_0) {
		msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
		printk(KERN_ERR " [Camera] below HW_REV_0 is using power source from PM\n");
	}
	else if(hw_rev == HW_REV_A) {
		msm_gpiomux_install(msm_sensor_configs_rev_a, ARRAY_SIZE(msm_sensor_configs_rev_a));
		printk(KERN_ERR " [Camera] greater than HW_REV_A is using power source from Ex-LDO used GPIO\n");
	}
	else if(hw_rev == HW_REV_B) {
		msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
		printk(KERN_ERR " [Camera] In greater than HW_REV_B, MAIN_CAM0_RESET_N has been changed from GPIO_98 to GPIO_114\n");
	}
	else {
		msm_gpiomux_install(msm_sensor_configs_rev_c, ARRAY_SIZE(msm_sensor_configs_rev_c));
		printk(KERN_ERR " [Camera] In greater than HW_REV_C, GPIO_110 is used for HI707\n");
	}
/* LGE_CHANGE_E, Add gpiomux for ex-ldo used gpio, 2013-09-04, [email protected] */


	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs,
			ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>
	msm_gpiomux_install(gpio_func_audio_configs,
			ARRAY_SIZE(gpio_func_audio_configs));

	// GPIO related function <<11.SD CARD>>
	msm_gpiomux_install(&sd_card_det, 1);

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(gpio_func_battery_configs,
			ARRAY_SIZE(gpio_func_battery_configs));

	// GPIO related function <<13.BT>>
	msm_gpiomux_install(gpio_func_bt_configs,
			ARRAY_SIZE(gpio_func_bt_configs));

	// GPIO related function <<14.WIFI>>
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	// GPIO related function <<15.FM>>
	msm_gpiomux_install(gpio_func_fm_configs,
			ARRAY_SIZE(gpio_func_fm_configs));

	// GPIO related function <<16.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs,
			ARRAY_SIZE(gpio_func_sim_configs));

	// GPIO related function <<17.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs,
			ARRAY_SIZE(gpio_func_slimbus_configs));

	// GPIO related function <<18.RF>>
	msm_gpiomux_install(gpio_func_rf_configs,
			ARRAY_SIZE(gpio_func_rf_configs));

	// GPIO related function <<19.KEY PAD>>
	if ( hw_rev >= HW_REV_A )
		msm_gpiomux_install(msm_keypad_configs_rev_a,
				ARRAY_SIZE(msm_keypad_configs_rev_a));
	else
		msm_gpiomux_install(msm_keypad_configs,
				ARRAY_SIZE(msm_keypad_configs));

	// GPIO related function <<20.LOGIC>>
	msm_gpiomux_install(gpio_func_logic_configs,
			ARRAY_SIZE(gpio_func_logic_configs));

#endif

#ifndef CONFIG_MACH_LGE
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
		msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

/* Applied Rev_E board changes */
	if( hw_rev >= HW_REV_E )
	{
		msm_gpiomux_install(pcb_indicator_configs, ARRAY_SIZE(pcb_indicator_configs));
		msm_gpiomux_install(radiation_pwr_ant_configs, ARRAY_SIZE(radiation_pwr_ant_configs));
		msm_gpiomux_install(vt_maker_id_configs, ARRAY_SIZE(vt_maker_id_configs));
	}
}

コード例 #17

0

ファイルを表示

ファイル: board-8926-vfp-kr-gpiomux.c プロジェクト: TeamRegular/android_kernel_lge_e2nxx-stock

void __init msm8226_init_gpiomux(void)
{
	int rc;
	int gpio_index = 0;

	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via JAGUAR
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.WLC>>
	// GPIO related function <<17.SIM>>
	// GPIO related function <<18.SLIMBUS>>
	// GPIO related function <<19.RF>>
	// GPIO related function <<20.KEY PAD>>
	// GPIO related function <<21.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch (hw_rev) {
	case HW_REV_0:
	case HW_REV_A:
		for (gpio_index = 0;
		     gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END;
		     gpio_index++) {
			gpio_func_reserved_pin_config.gpio =
			    gpio_reserved_pin_rev_A[gpio_index];
			msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
		}
		break;

	case HW_REV_B :
	case HW_REV_C :
	case HW_REV_D :
	case HW_REV_E :
	case HW_REV_1_0 :
	case HW_REV_1_1 :
	default:
			break;
	}

	msm_gpiomux_install(wcnss_5wire_interface, ARRAY_SIZE(wcnss_5wire_interface));
	
	msm_gpiomux_install(&sd_card_det, 1);
	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(msm_sensor_ic_configs, ARRAY_SIZE(msm_sensor_ic_configs));	

	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(msm_i2c_configs, ARRAY_SIZE(msm_i2c_configs));

	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));

	// GPIO related function <<5.NFC>>
/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */

	// GPIO related function <<6.LCD>>
		msm_gpiomux_install_nowrite(msm_lcd_configs,
						ARRAY_SIZE(msm_lcd_configs));

	// GPIO related function <<7.CAMERA>>
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>

	// GPIO related function <<11.SD CARD>>
	//msm_gpiomux_sdc3_install();

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(power_configs, ARRAY_SIZE(power_configs));
	
	// GPIO related function <<13.BT>>
#ifdef CONFIG_LGE_BLUETOOTH
    bluetooth_msm_gpiomux_install();
#endif /* CONFIG_LGE_BLUETOOTH */
	
	// GPIO related function <<15.FM>>
	msm_gpiomux_install(msm_auxpcm_configs,	ARRAY_SIZE(msm_auxpcm_configs));

	// GPIO related function <<16.WLC>>
	
	// GPIO related function <<17.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
	
	// GPIO related function <<18.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
	
	// GPIO related function <<19.RF>>
	msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
	
	// GPIO related function <<20.KEY PAD>>
	msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
	msm_gpiomux_install(msm_pp2106_keypad_configs, ARRAY_SIZE(msm_pp2106_keypad_configs));
	
	// GPIO related function <<21.LOGIC>>
	logic_msm_gpiomux_install();

/* LGE_CHANGE_S, [TDMB][[email protected]], TDMB Bring Up */
#if defined(CONFIG_LGE_BROADCAST_TDMB)
	msm_gpiomux_install(msm8926_tdmb_configs, ARRAY_SIZE(msm8926_tdmb_configs));
#endif
/* LGE_CHANGE_E, [TDMB][[email protected]], TDMB Bring Up */

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

#ifndef CONFIG_MACH_LGE
	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif
}

コード例 #18

0

ファイルを表示

ファイル: board-8226-jag3gss-global-com-gpiomux.c プロジェクト: TheNotOnly/android_kernel_lge_jagnm_kk

void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	int gpio_index;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#ifdef CONFIG_MACH_LGE
	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via W7 Rev 0
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.SIM>>
	// GPIO related function <<17.SLIMBUS>>
	// GPIO related function <<18.RF>>
	// GPIO related function <<19.KEY PAD>>
	// GPIO related function <<20.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch (hw_rev) {
	case HW_REV_A:
		for (gpio_index = 0; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END; gpio_index++) {
			gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
			msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
		}
		break;
	case HW_REV_B:
	default:
		for (gpio_index = 0; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END; gpio_index++) {
			gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
			msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
		}
		break;
	}

	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(gpio_func_sensor_configs,
			ARRAY_SIZE(gpio_func_sensor_configs));

	msm_gpiomux_install(msm_hall_ic_configs,
			ARRAY_SIZE(msm_hall_ic_configs));

	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(gpio_func_i2c_configs,
			ARRAY_SIZE(gpio_func_i2c_configs));

	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs,
			ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	msm_gpiomux_install(msm_synaptics_configs,
			ARRAY_SIZE(msm_synaptics_configs));

	// GPIO related function <<5.NFC>>
	/*                                                      */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
	/*                                                      */


	// GPIO related function <<6.LCD>>
	msm_gpiomux_install(gpio_func_lcd_configs,
			ARRAY_SIZE(gpio_func_lcd_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	// GPIO related function <<7.CAMERA>>
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs,
			ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>
	msm_gpiomux_install(gpio_func_audio_configs,
			ARRAY_SIZE(gpio_func_audio_configs));

	// GPIO related function <<11.SD CARD>>
	msm_gpiomux_install(&sd_card_det, 1);

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(gpio_func_battery_configs,
			ARRAY_SIZE(gpio_func_battery_configs));

	// GPIO related function <<13.BT>>
	/*msm_gpiomux_install(gpio_func_bt_configs,
			ARRAY_SIZE(gpio_func_bt_configs)); */
#ifdef CONFIG_LGE_BLUETOOTH
    bluetooth_msm_gpiomux_install();
#endif  /*                      */

	// GPIO related function <<14.WIFI>>
#if defined ( CONFIG_BCMDHD ) || defined ( CONFIG_BCMDHD_MODULE )
#else
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
	
	// GPIO related function <<15.FM>>
	msm_gpiomux_install(gpio_func_fm_configs,
			ARRAY_SIZE(gpio_func_fm_configs));

	// GPIO related function <<16.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs,
			ARRAY_SIZE(gpio_func_sim_configs));

	// GPIO related function <<17.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs,
			ARRAY_SIZE(gpio_func_slimbus_configs));

	// GPIO related function <<18.RF>>
	msm_gpiomux_install(gpio_func_rf_configs,
			ARRAY_SIZE(gpio_func_rf_configs));

	// GPIO related function <<19.KEY PAD>>
	msm_gpiomux_install(msm_keypad_configs,
				ARRAY_SIZE(msm_keypad_configs));

	// GPIO related function <<20.LOGIC>>
	msm_gpiomux_install(gpio_func_logic_configs,
			ARRAY_SIZE(gpio_func_logic_configs));
#endif

#ifndef CONFIG_MACH_LGE
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

#if defined(CONFIG_TSPDRV)
	msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif

    msm_gpiomux_sdc3_install();
#ifdef CONFIG_SND_BRCM_FM_RADIO
    msm_gpiomux_install(msm_pri_mi2s_configs, ARRAY_SIZE(msm_pri_mi2s_configs));
#endif
}

コード例 #19

0

ファイルを表示

ファイル: board-8226-gpiomux.c プロジェクト: Hashcode/android_kernel_samsung_hlte

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_MILLET_PROJECT) || defined(CONFIG_SEC_MATISSE_PROJECT) || defined(CONFIG_SEC_BERLUTI_PROJECT)
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
#endif
	msm_gpiomux_sdc3_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
#if defined(CONFIG_MACH_MILLETLTE_OPEN)
				if ( system_rev >= 0 && system_rev < 3)
#elif defined (CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_BERLUTI3G_EUR)
				if ( system_rev >= 2 && system_rev < 4)
#elif defined(CONFIG_MACH_MILLETWIFI_OPEN)
				if ( system_rev >= 0 && system_rev < 5)
#endif

		{
			msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
			msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
		}
#endif
}

コード例 #20

0

ファイルを表示

ファイル: board-degas-gpiomux.c プロジェクト: LGaljo/android_kernel_samsung_s3ve3g

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#if defined (CONFIG_MACH_MILLETLTE_VZW)
	msm_gpiomux_install(milletltevzw_gpio_10, ARRAY_SIZE(milletltevzw_gpio_10));
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
#if defined (CONFIG_MACH_BERLUTI3G_EUR)
		msm_gpiomux_install(msm_cypress_configs,
				ARRAY_SIZE(msm_cypress_configs));

		msm_gpiomux_install(msm_keyboad_cypress_configs,
				ARRAY_SIZE(msm_keyboad_cypress_configs));
#elif defined(CONFIG_SEC_MILLET_PROJECT)
msm_gpiomux_install(msm_melfas_configs,
				ARRAY_SIZE(msm_melfas_configs));
#else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));
#endif
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

#if !defined (CONFIG_SEC_MILLET_PROJECT)
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));
#endif

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_MILLET_PROJECT)
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
	if ( system_rev >= 0 && system_rev < 3) {
		msm_gpiomux_install(light_prox_config, ARRAY_SIZE(light_prox_config));
		msm_gpiomux_install(irled_i2c_scl_config,
						ARRAY_SIZE(irled_i2c_scl_config));
	} else {
		msm_gpiomux_install(nc_light_prox_config, ARRAY_SIZE(nc_light_prox_config));
#if defined (CONFIG_MACH_MILLETLTE_VZW) || defined(CONFIG_SEC_MILLETWIFI_COMMON)
		msm_gpiomux_install(irled_i2c_scl_config,
						ARRAY_SIZE(irled_i2c_scl_config));
#endif
	}
#endif
	msm_gpiomux_sdc3_install();


	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
	msm_gpiomux_install(msm_ta_int_n_configs, ARRAY_SIZE(msm_ta_int_n_configs));
  #if defined (CONFIG_SEC_MILLETLTE_COMMON)
  if ( system_rev >= 3)
  {
    msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
  }
  #else
    msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
  #endif
#if defined (CONFIG_SEC_MILLETWIFI_COMMON)
	msm_gpiomux_install(milletwifi_nc_gpio_cfgs, ARRAY_SIZE(milletwifi_nc_gpio_cfgs));
#endif
#if defined (CONFIG_MACH_MILLETLTE_OPEN)
msm_gpiomux_install(millet_nc_gpio_cfgs, ARRAY_SIZE(millet_nc_gpio_cfgs));
if ( system_rev >= 3){
	msm_gpiomux_install(millet_nc3_gpio_cfgs, ARRAY_SIZE(millet_nc3_gpio_cfgs));
}
#endif
#if defined (CONFIG_MACH_MILLET3G_EUR)
if ( system_rev >= 2)
	msm_gpiomux_install(millet3g_nc_gpio_cfgs, ARRAY_SIZE(millet3g_nc_gpio_cfgs));
#endif
#if defined (CONFIG_MACH_MILLETLTE_VZW)
if ( system_rev >= 1)
	msm_gpiomux_install(milletltevzw_nc_gpio_cfgs, ARRAY_SIZE(milletltevzw_nc_gpio_cfgs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
	if(!poweroff_charging)
	msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));
#ifdef CONFIG_SND_SOC_MAX98504
#if defined(CONFIG_MACH_MILLETLTE_OPEN)
				if ( system_rev >= 0 && system_rev < 3)
#elif defined (CONFIG_MACH_MILLET3G_EUR)
				if ( system_rev >= 2 && system_rev < 4)
#elif defined(CONFIG_MACH_MILLETWIFI_OPEN)
				if ( system_rev >= 0 && system_rev < 5)
#endif

		{
			msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
			msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
			msm_gpiomux_install(msm8226_amp_int_configs,ARRAY_SIZE(msm8226_amp_int_configs));
		}
#endif
}

コード例 #21

0

ファイルを表示

ファイル: board-8926-x3-trf-us-gpiomux.c プロジェクト: TeamRegular/android_kernel_lge_e2nxx-stock

void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	int gpio_index = 0;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif /* CONFIG_MACH_LGE */
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
#ifdef CONFIG_MACH_LGE
	switch ( hw_rev ){
		case HW_REV_0 :
		case HW_REV_A :
		case HW_REV_A2 :
		case HW_REV_B :		
		    for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio));	/* MAIN_CAM_ID */
				}
			break;
		case HW_REV_B2 :
		case HW_REV_C :
		    for ( gpio_index = 0 ; gpio_reserved_pin_rev_C[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio));	/* MAIN_CAM_ID */
				}
			break;
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_C[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_C[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				msm_gpiomux_install(main_cam_id_gpio, ARRAY_SIZE(main_cam_id_gpio));	/* MAIN_CAM_ID */
				}
			break;
	}
	
	if(hw_rev < HW_REV_A2) {
		msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		printk(KERN_ERR "[Touch] HW_REV_A configs \n");
	} else if(hw_rev == HW_REV_A2) {
#if defined(CONFIG_TOUCHSCREEN_LGE_TS_MISC)
		msm_gpiomux_install(msm_touch_configs_rev_a2, ARRAY_SIZE(msm_touch_configs_rev_a2));
		printk(KERN_ERR "[Touch] HW_REV_A2 configs \n");
#endif /* CONFIG_TOUCHSCREEN_LGE_TS_MISC */
	} else if(hw_rev >= HW_REV_B) {
#if defined (CONFIG_LGE_TOUCHSCREEN_SYNAPTIC) || defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)
		msm_gpiomux_install(msm_touch_configs_rev_b, ARRAY_SIZE(msm_touch_configs_rev_b));
		if(hw_rev == HW_REV_B) {
			printk(KERN_ERR "[Touch] HW_REV_B configs \n");
		} else if (hw_rev >= HW_REV_B2) {
			printk(KERN_ERR "[Touch] over HW_REV_B2 configs \n");
		} else {}
#endif /* CONFIG_LGE_TOUCHSCREEN_SYNAPTIC || CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 */
	} else {}
#endif /* CONFIG_MACH_LGE */
#if defined(CONFIG_BU52061NVX)
	msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#endif /* CONFIG_BU52061NVX */
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
#ifndef CONFIG_MACH_LGE
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
}

コード例 #22

0

ファイルを表示

ファイル: board-8926-x5-spr-gpiomux.c プロジェクト: wufei34/LG_D618_kernel

void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	int gpio_index = 0;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#ifdef CONFIG_MACH_LGE

	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via X5
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.WLC>>
	// GPIO related function <<17.SIM>>
	// GPIO related function <<18.SLIMBUS>>
	// GPIO related function <<19.RF>>
	// GPIO related function <<20.KEY PAD>>
	// GPIO related function <<21.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch ( hw_rev ){
		case HW_REV_0 :
		case HW_REV_A :
		case HW_REV_B :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_C :
		case HW_REV_D :
		case HW_REV_E :
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
	}
#endif

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

	if (hw_rev <= HW_REV_B) {
		msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));
		printk(KERN_ERR "[Touch] HW_REV_0, A, B configs \n");
	} else if (hw_rev == HW_REV_C) {
		msm_gpiomux_install(msm_melfas_configs_rev_c, ARRAY_SIZE(msm_melfas_configs_rev_c));
		printk(KERN_ERR "[Touch] HW_REV_C configs \n");
	} else {
		msm_gpiomux_install(msm_atmel_configs_rev_d, ARRAY_SIZE(msm_atmel_configs_rev_d));
		printk(KERN_ERR "[Touch] HW_REV_D or above use Atmel \n");
	}

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
	msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#ifndef CONFIG_MACH_LGE
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif


/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN544_C3
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */


}

コード例 #23

0

ファイルを表示

ファイル: board-8926-x3-kr-gpiomux.c プロジェクト: DroidHost/android_kernel_LGE_x5

/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up*/
#if defined(CONFIG_BU52061NVX)
static struct msm_gpiomux_config msm_hall_ic_configs[] __initdata = {
	{
		.gpio = 4,
		.settings = {
			[GPIOMUX_ACTIVE] = &hall_ic_sus_cfg,
		},
    },
#ifdef CONFIG_BU52033NVX_CARKIT
	{
		.gpio = 5,
		.settings = {
			[GPIOMUX_ACTIVE] = &hall_ic_sus_cfg,
		},
    },
#endif
};
#endif /* CONFIG_BU52061NVX */
void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif /* CONFIG_MACH_LGE */
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
#ifdef CONFIG_MACH_LGE
	if(hw_rev < HW_REV_A2) {
		msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		printk(KERN_ERR "[Touch] HW_REV_A configs \n");
	} else if(hw_rev == HW_REV_A2) {
#if defined(CONFIG_TOUCHSCREEN_LGE_TS_MISC)
		msm_gpiomux_install(msm_touch_configs_rev_a2, ARRAY_SIZE(msm_touch_configs_rev_a2));
		printk(KERN_ERR "[Touch] HW_REV_A2 configs \n");
#endif /* CONFIG_TOUCHSCREEN_LGE_TS_MISC */
	} else if(hw_rev >= HW_REV_B) {
#if defined (CONFIG_LGE_TOUCHSCREEN_SYNAPTIC) || defined(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)
		msm_gpiomux_install(msm_touch_configs_rev_b, ARRAY_SIZE(msm_touch_configs_rev_b));
		if(hw_rev == HW_REV_B) {
			printk(KERN_ERR "[Touch] HW_REV_B configs \n");
		} else if (hw_rev >= HW_REV_B2) {
			printk(KERN_ERR "[Touch] over HW_REV_B2 configs \n");
		} else {}
#endif /* CONFIG_LGE_TOUCHSCREEN_SYNAPTIC || CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 */
	} else {}
#endif /* CONFIG_MACH_LGE */
#if defined(CONFIG_BU52061NVX)
	msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#endif /* CONFIG_BU52061NVX */
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
#ifndef CONFIG_MACH_LGE
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */
}

コード例 #24

0

ファイルを表示

ファイル: board-8226-gpiomux.c プロジェクト: SamsungMSM8226/android_kernel_samsung_ms013g-jb

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_MS01_CHN_CTC) \
    || defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
	msm_gpiomux_install(msm_hall_configs,
			ARRAY_SIZE(msm_hall_configs));
#endif

	if (of_board_is_qrd())
		msm_gpiomux_install(msm_qrd_blsp_configs,
			ARRAY_SIZE(msm_qrd_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MS01_CHN_CTC) \
    || defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
		msm_gpiomux_install(msm8226_tx_gtr_configs,
					ARRAY_SIZE(msm8226_tx_gtr_configs));
		msm_gpiomux_install(muic_i2c_configs,
					ARRAY_SIZE(muic_i2c_configs));
#endif

	if (of_board_is_qrd())
		msm_gpiomux_install(msm_qrd_goodix_configs,
				ARRAY_SIZE(msm_qrd_goodix_configs));

	else
#if defined(CONFIG_TOUCHSCREEN_ZINITIX_BT531)
		msm_gpiomux_install(msm_zinitixs_configs,
			ARRAY_SIZE(msm_zinitixs_configs));
#elif defined(CONFIG_TOUCHSCREEN_ATMEL_MXTS)
		msm_gpiomux_install(msm_atmel_configs,
			ARRAY_SIZE(msm_atmel_configs));
#elif defined(CONFIG_TOUCHSCREEN_MMS144)
		msm_gpiomux_install(msm_melfas_configs,
			ARRAY_SIZE(msm_melfas_configs));
#else
		msm_gpiomux_install(msm_synaptics_configs,
			ARRAY_SIZE(msm_synaptics_configs));
#endif
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

#if defined(CONFIG_FB_MSM_MDSS_SHARP_HD_PANEL)\
	|| defined(CONFIG_MACH_MILLET3G_EUR)
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
#endif
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
/*
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));
*/
#if defined(CONFIG_MACH_MILLET3G_EUR)
	msm_gpiomux_install(msm_speaker_enable_gpio_configs, ARRAY_SIZE(msm_speaker_enable_gpio_configs));
#endif
#if defined(CONFIG_SEC_NFC_I2C) || defined(CONFIG_BCM2079X_NFC_I2C) || defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));

#else
	msm_gpiomux_install(msm_nc_configs,
	ARRAY_SIZE(msm_nc_configs));
#endif

#if defined(CONFIG_YAS_ACC_DRIVER_BMA250) || defined(CONFIG_INPUT_MPU6500) || \
defined(CONFIG_PROXIMITY_SENSOR) || defined (CONFIG_SENSORS_HSCDTD008A)
	msm_gpiomux_install(msm_sensors_configs,
		ARRAY_SIZE(msm_sensors_configs));
#endif

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	msm_gpiomux_sdc3_install();
	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_LEDS_AN30259A)
	msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
#endif

#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)||defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ)
	msm_gpiomux_install(msm8226_nc_gpio_cfgs, ARRAY_SIZE(msm8226_nc_gpio_cfgs));
#endif

#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#if defined(CONFIG_MACH_MS01_EUR_3G)
	msm_gpiomux_install(ms01_nc_gpio_cfgs, ARRAY_SIZE(ms01_nc_gpio_cfgs));
#endif
#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
	if ( system_rev >= 4 ) {
		msm_gpiomux_install(ms01_ctc_nc_gpio_cfgs, ARRAY_SIZE(ms01_ctc_nc_gpio_cfgs));
	}
#elif defined(CONFIG_MACH_CRATERQ)
	msm_gpiomux_install(craterq_gpio_configs, ARRAY_SIZE(craterq_gpio_configs));
#endif
}

コード例 #25

0

ファイルを表示

ファイル: board-8974-sec-fresco-gpiomux.c プロジェクト: adis1313/android_kernel_samsung_msm8974

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
		socinfo_get_version());
	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#ifdef CONFIG_MFD_MAX77888
#if 0 // MCU Pin
	msm_gpiomux_install(msm8974_muic_configs, ARRAY_SIZE(msm8974_muic_configs));
#endif
#endif

#ifdef CONFIG_W1_SLAVE_DS28EL15
	msm_gpiomux_install(msm8974_cover_id_config, ARRAY_SIZE(msm8974_cover_id_config));
#endif

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if 0//defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
	msm_gpiomux_btuart_install();
#endif

	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
	msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));

#if 0//!defined(CONFIG_SENSORS_SSP)
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));
#endif

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(msm_sensor_configs_dragonboard, \
				ARRAY_SIZE(msm_sensor_configs_dragonboard));
	else
		msm_gpiomux_install(msm_sensor_configs, \
				ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();

	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	msm_gpiomux_install(es325_config, ARRAY_SIZE(es325_config));
	msm_gpiomux_install(msm8974_audio_configs, ARRAY_SIZE(msm8974_audio_configs));
	msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));
#if 0 // MCU pin
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#if defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(ssp_configs,
				ARRAY_SIZE(ssp_configs));
#endif

#if defined(CONFIG_SENSORS)
	msm_gpiomux_install(msm_sensors_configs,
		ARRAY_SIZE(msm_sensors_configs));
#endif
	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	if (system_rev > 5)
		msm_gpiomux_install(msm_hdmi_ddc_configs,
				ARRAY_SIZE(msm_hdmi_ddc_configs));
#ifdef CONFIG_VIDEO_MHL_V2
	if(system_rev > 1)
		msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif
#if 0
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
#if defined(CONFIG_SEC_NFC_I2C) || defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs,
	ARRAY_SIZE(msm_nfc_configs));
#endif
	if (of_board_is_liquid() ||
	    (of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */

#ifdef CONFIG_USB_SWITCH_FSA9485
	if (system_rev >= 10)
		msm_gpiomux_install(vienna_r10_muic_configs,
				ARRAY_SIZE(vienna_r10_muic_configs));
	else
		msm_gpiomux_install(vienna_muic_configs,
				ARRAY_SIZE(vienna_muic_configs));
#endif

	if (of_board_is_cdp()) {
#if 0 /* Not used at Mondrian */
		msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));
#endif
	} else if (of_board_is_liquid() || of_board_is_fluid() ||
						of_board_is_mtp())
		msm_gpiomux_install(msm_epm_configs,
				ARRAY_SIZE(msm_epm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

#if defined(CONFIG_LEDS_AN30259A)
	msm_gpiomux_install(an30259a_led_config,
			ARRAY_SIZE(an30259a_led_config));
#endif

#ifdef CONFIG_INPUT_WACOM_HL
	msm_gpiomux_install(msm8974_wacom_configs,
		ARRAY_SIZE(msm8974_wacom_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));
}

コード例 #26

0

ファイルを表示

ファイル: board-a3-gpiomux.c プロジェクト: cpflayan/htc_kernel_a3

void __init msm8226_htc_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

	msm_gpiomux_install(msm_slimbus_config,
			ARRAY_SIZE(msm_slimbus_config));
	msm_gpiomux_install(msm_aud_configs,
			ARRAY_SIZE(msm_aud_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

#if 0 
	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

	msm_gpiomux_sdc3_install();

	msm_gpiomux_install(debug_uart_configs, ARRAY_SIZE(debug_uart_configs));
	msm_gpiomux_install(ncgpio_configs, ARRAY_SIZE(ncgpio_configs));

#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; 
		msm_hsic_configs[1].gpio = 120; 
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}

コード例 #27

0

ファイルを表示

ファイル: board-8926-g2m-open-gpiomux.c プロジェクト: Rashed97/lge_d295

void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	int gpio_index = 0;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#ifdef CONFIG_MACH_LGE

	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via G2M
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.SIM>>
	// GPIO related function <<17.SLIMBUS>>
	// GPIO related function <<18.RF>>
	// GPIO related function <<19.KEY PAD>>
	// GPIO related function <<20.LOGIC>>

    // GPIO related function <<0.Resreved Pin>>
	switch ( hw_rev ){
		case HW_REV_0 :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
            break;
		case HW_REV_A :
		case HW_REV_B :
		case HW_REV_C :
		case HW_REV_D :
		case HW_REV_E :
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
	}
#endif

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	// GPIO related function <<7.CAMERA>>
/*                                                                                  */
	msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
	printk(KERN_ERR " [Camera] In greater than HW_REV_B, MAIN_CAM0_RESET_N has been changed from GPIO_98 to GPIO_114\n");
/*                                                                                  */


	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs,
			ARRAY_SIZE(gpio_func_flash_led_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if(hw_rev < HW_REV_A) {
		msm_gpiomux_install(msm_melfas_configs, ARRAY_SIZE(msm_melfas_configs));
		printk(KERN_ERR "[Touch] HW_REV_0 configs .\n");
	}
	else{
		msm_gpiomux_install(msm_melfas_configs_rev_a, ARRAY_SIZE(msm_melfas_configs_rev_a));
		printk(KERN_ERR "[Touch] Greater than HW_REV_0 .\n");
	}
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
	msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
#ifndef CONFIG_MACH_LGE
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif


/*                                                       */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*                                                       */


}

コード例 #28

0

ファイルを表示

ファイル: board-a3ul-gpiomux.c プロジェクト: Arc-Team/android_kernel_htc_a11

void __init msm8226_htc_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

//htc audio ++
	msm_gpiomux_install(msm_slimbus_config,
			ARRAY_SIZE(msm_slimbus_config));
	msm_gpiomux_install(msm_aud_configs,
			ARRAY_SIZE(msm_aud_configs));
//htc audio --

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

#if 0 /* it will make gpio low and fail to get batt_id */
	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

	msm_gpiomux_sdc3_install();

	msm_gpiomux_install(debug_uart_configs, ARRAY_SIZE(debug_uart_configs));
	msm_gpiomux_install(ncgpio_configs, ARRAY_SIZE(ncgpio_configs));

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}