コード例 #1
0
ファイル: vfpmodule.c プロジェクト: Jack003/swiftdroid_kernel
static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state)
{
	int saved = vfp_flush_context();

	if (saved)
		printk(KERN_DEBUG "%s: saved vfp state\n", __func__);

	/* clear any information we had about last context state */
	memset(last_VFP_context, 0, sizeof(last_VFP_context));

	return 0;
}
コード例 #2
0
ファイル: pm2.c プロジェクト: DAGr8/gp-peak-kernel
/*
 * Power collapse the Apps processor without involving Modem.
 *
 * Return value:
 *      0: success
 */
static int __ref msm_pm_power_collapse_standalone(bool from_idle)
{
	int collapsed = 0;
	int ret;
	void *entry;

	MSM_PM_DPRINTK(MSM_PM_DEBUG_SUSPEND|MSM_PM_DEBUG_POWER_COLLAPSE,
		KERN_INFO, "%s()\n", __func__);

	ret = msm_spm_set_low_power_mode(MSM_SPM_MODE_POWER_COLLAPSE, false);
	WARN_ON(ret);

	entry = (!smp_processor_id() || from_idle) ?
			msm_pm_collapse_exit : msm_secondary_startup;

	msm_pm_boot_config_before_pc(smp_processor_id(),
						virt_to_phys(entry));

#ifdef CONFIG_VFP
	vfp_flush_context();
#endif

#ifdef CONFIG_CACHE_L2X0
	if (!cpu_is_msm8625())
		l2cc_suspend();
#endif

	collapsed = msm_pm_collapse();

#ifdef CONFIG_CACHE_L2X0
	if (!cpu_is_msm8625())
		l2cc_resume();
#endif

	msm_pm_boot_config_after_pc(smp_processor_id());

	if (collapsed) {
#ifdef CONFIG_VFP
		vfp_reinit();
#endif
		cpu_init();
		local_fiq_enable();
	}

	MSM_PM_DPRINTK(MSM_PM_DEBUG_SUSPEND | MSM_PM_DEBUG_POWER_COLLAPSE,
		KERN_INFO,
		"%s(): msm_pm_collapse returned %d\n", __func__, collapsed);

	ret = msm_spm_set_low_power_mode(MSM_SPM_MODE_CLOCK_GATING, false);
	WARN_ON(ret);

	return !collapsed;
}
コード例 #3
0
static int vfp_pm_suspend(void)
{
	vfp_flush_context();

	return 0;
}
コード例 #4
0
ファイル: pm2.c プロジェクト: DAGr8/gp-peak-kernel
/*
 * Power collapse the Apps processor.  This function executes the handshake
 * protocol with Modem.
 *
 * Return value:
 *      -EAGAIN: modem reset occurred or early exit from power collapse
 *      -EBUSY: modem not ready for our power collapse -- no power loss
 *      -ETIMEDOUT: timed out waiting for modem's handshake -- no power loss
 *      0: success
 */
static int msm_pm_power_collapse
	(bool from_idle, uint32_t sleep_delay, uint32_t sleep_limit)
{
	struct msm_pm_polled_group state_grps[2];
	unsigned long saved_acpuclk_rate;
	int collapsed = 0;
#ifdef CONFIG_MSM_SM_EVENT
	uint64_t sclk_suspend_time = 0, sclk_resume_time, sclk_period;
#endif
	int ret;
	int val;
	int modem_early_exit = 0;

	MSM_PM_DPRINTK(MSM_PM_DEBUG_SUSPEND|MSM_PM_DEBUG_POWER_COLLAPSE,
		KERN_INFO, "%s(): idle %d, delay %u, limit %u\n", __func__,
		(int)from_idle, sleep_delay, sleep_limit);

	if (!(smsm_get_state(SMSM_POWER_MASTER_DEM) & DEM_MASTER_SMSM_READY)) {
		MSM_PM_DPRINTK(
			MSM_PM_DEBUG_SUSPEND | MSM_PM_DEBUG_POWER_COLLAPSE,
			KERN_INFO, "%s(): master not ready\n", __func__);
		ret = -EBUSY;
		goto power_collapse_bail;
	}

	memset(msm_pm_smem_data, 0, sizeof(*msm_pm_smem_data));

	if (cpu_is_msm8625()) {
		/* Program the SPM */
		ret = msm_spm_set_low_power_mode(MSM_SPM_MODE_POWER_COLLAPSE,
									false);
		WARN_ON(ret);
	}

	if (msm_cpr_ops)
		msm_cpr_ops->cpr_suspend();

	msm_pm_irq_extns->enter_sleep1(true, from_idle,
						&msm_pm_smem_data->irq_mask);
	msm_sirc_enter_sleep();
	msm_gpio_enter_sleep(from_idle);

	msm_pm_smem_data->sleep_time = sleep_delay;
	msm_pm_smem_data->resources_used = sleep_limit;

	/* Enter PWRC/PWRC_SUSPEND */

	if (from_idle)
		smsm_change_state(SMSM_APPS_DEM, DEM_SLAVE_SMSM_RUN,
			DEM_SLAVE_SMSM_PWRC);
	else
		smsm_change_state(SMSM_APPS_DEM, DEM_SLAVE_SMSM_RUN,
			DEM_SLAVE_SMSM_PWRC | DEM_SLAVE_SMSM_PWRC_SUSPEND);

	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): PWRC");
	MSM_PM_DEBUG_PRINT_SLEEP_INFO();

	memset(state_grps, 0, sizeof(state_grps));
	state_grps[0].group_id = SMSM_POWER_MASTER_DEM;
	state_grps[0].bits_all_set = DEM_MASTER_SMSM_RSA;
	state_grps[1].group_id = SMSM_MODEM_STATE;
	state_grps[1].bits_all_set = SMSM_RESET;

	ret = msm_pm_poll_state(ARRAY_SIZE(state_grps), state_grps);

	if (ret < 0) {
		printk(KERN_EMERG "%s(): power collapse entry "
			"timed out waiting for Modem's response\n", __func__);
		msm_pm_timeout();
	}

	if (ret == 1) {
		MSM_PM_DPRINTK(
			MSM_PM_DEBUG_SUSPEND|MSM_PM_DEBUG_POWER_COLLAPSE,
			KERN_INFO,
			"%s(): msm_pm_poll_state detected Modem reset\n",
			__func__);
		goto power_collapse_early_exit;
	}

	/* DEM Master in RSA */

	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): PWRC RSA");

	ret = msm_pm_irq_extns->enter_sleep2(true, from_idle);
	if (ret < 0) {
		MSM_PM_DPRINTK(
			MSM_PM_DEBUG_SUSPEND|MSM_PM_DEBUG_POWER_COLLAPSE,
			KERN_INFO,
			"%s(): msm_irq_enter_sleep2 aborted, %d\n", __func__,
			ret);
		goto power_collapse_early_exit;
	}

#ifdef CONFIG_MSM_SM_EVENT
	if (!from_idle)
		sclk_suspend_time = msm_timer_get_sclk_time(&sclk_period);
#endif
	msm_pm_config_hw_before_power_down();
	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): pre power down");

	saved_acpuclk_rate = acpuclk_power_collapse();
	MSM_PM_DPRINTK(MSM_PM_DEBUG_CLOCK, KERN_INFO,
		"%s(): change clock rate (old rate = %lu)\n", __func__,
		saved_acpuclk_rate);

	if (saved_acpuclk_rate == 0) {
		msm_pm_config_hw_after_power_up();
		goto power_collapse_early_exit;
	}

#ifdef CONFIG_MSM_SM_EVENT
	if (!from_idle) {
		sm_add_event(SM_POWER_EVENT | SM_POWER_EVENT_SUSPEND, SM_EVENT_END, 0, 0, 0);
	}
#endif
	msm_pm_boot_config_before_pc(smp_processor_id(),
			virt_to_phys(msm_pm_collapse_exit));

#ifdef CONFIG_VFP
	if (from_idle)
		vfp_flush_context();
#endif

#ifdef CONFIG_CACHE_L2X0
	if (!cpu_is_msm8625())
		l2cc_suspend();
	else
		apps_power_collapse = 1;
#endif

	collapsed = msm_pm_collapse();

	/*
	 * TBD: Currently recognise the MODEM early exit
	 * path by reading the MPA5_GDFS_CNT_VAL register.
	 */
	if (cpu_is_msm8625()) {
		/*
		 * on system reset, default value of MPA5_GDFS_CNT_VAL
		 * is = 0x0, later modem reprogram this value to
		 * 0x00030004. Once APPS did a power collapse and
		 * coming out of it expected value of this register
		 * always be 0x00030004. Incase if APPS sees the value
		 * as 0x00030002 consider this case as a modem early
		 * exit.
		 */
		val = __raw_readl(MSM_CFG_CTL_BASE + 0x38);
		if (val != 0x00030002)
			power_collapsed = 1;
		else
			modem_early_exit = 1;
	}

#ifdef CONFIG_CACHE_L2X0
	if (!cpu_is_msm8625())
		l2cc_resume();
	else
		apps_power_collapse = 0;
#endif

	msm_pm_boot_config_after_pc(smp_processor_id());

	if (collapsed) {
#ifdef CONFIG_VFP
		if (from_idle)
			vfp_reinit();
#endif
		cpu_init();
		local_fiq_enable();
	}

	MSM_PM_DPRINTK(MSM_PM_DEBUG_SUSPEND | MSM_PM_DEBUG_POWER_COLLAPSE,
		KERN_INFO,
		"%s(): msm_pm_collapse returned %d\n", __func__, collapsed);

	MSM_PM_DPRINTK(MSM_PM_DEBUG_CLOCK, KERN_INFO,
		"%s(): restore clock rate to %lu\n", __func__,
		saved_acpuclk_rate);
	if (acpuclk_set_rate(smp_processor_id(), saved_acpuclk_rate,
			SETRATE_PC) < 0)
		printk(KERN_ERR "%s(): failed to restore clock rate(%lu)\n",
			__func__, saved_acpuclk_rate);

	msm_pm_irq_extns->exit_sleep1(msm_pm_smem_data->irq_mask,
		msm_pm_smem_data->wakeup_reason,
		msm_pm_smem_data->pending_irqs);

	msm_pm_config_hw_after_power_up();
	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): post power up");

	memset(state_grps, 0, sizeof(state_grps));
	state_grps[0].group_id = SMSM_POWER_MASTER_DEM;
	state_grps[0].bits_any_set =
		DEM_MASTER_SMSM_RSA | DEM_MASTER_SMSM_PWRC_EARLY_EXIT;
	state_grps[1].group_id = SMSM_MODEM_STATE;
	state_grps[1].bits_all_set = SMSM_RESET;

	ret = msm_pm_poll_state(ARRAY_SIZE(state_grps), state_grps);

	if (ret < 0) {
		printk(KERN_EMERG "%s(): power collapse exit "
			"timed out waiting for Modem's response\n", __func__);
		msm_pm_timeout();
	}

	if (ret == 1) {
		MSM_PM_DPRINTK(
			MSM_PM_DEBUG_SUSPEND|MSM_PM_DEBUG_POWER_COLLAPSE,
			KERN_INFO,
			"%s(): msm_pm_poll_state detected Modem reset\n",
			__func__);
		goto power_collapse_early_exit;
	}

	/* Sanity check */
	if (collapsed && !modem_early_exit) {
		BUG_ON(!(state_grps[0].value_read & DEM_MASTER_SMSM_RSA));
	} else {
		BUG_ON(!(state_grps[0].value_read &
			DEM_MASTER_SMSM_PWRC_EARLY_EXIT));
		goto power_collapse_early_exit;
	}

	/* Enter WFPI */

	smsm_change_state(SMSM_APPS_DEM,
		DEM_SLAVE_SMSM_PWRC | DEM_SLAVE_SMSM_PWRC_SUSPEND,
		DEM_SLAVE_SMSM_WFPI);

	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): WFPI");

	memset(state_grps, 0, sizeof(state_grps));
	state_grps[0].group_id = SMSM_POWER_MASTER_DEM;
	state_grps[0].bits_all_set = DEM_MASTER_SMSM_RUN;
	state_grps[1].group_id = SMSM_MODEM_STATE;
	state_grps[1].bits_all_set = SMSM_RESET;

	ret = msm_pm_poll_state(ARRAY_SIZE(state_grps), state_grps);

	if (ret < 0) {
		printk(KERN_EMERG "%s(): power collapse WFPI "
			"timed out waiting for Modem's response\n", __func__);
		msm_pm_timeout();
	}

	if (ret == 1) {
		MSM_PM_DPRINTK(
			MSM_PM_DEBUG_SUSPEND|MSM_PM_DEBUG_POWER_COLLAPSE,
			KERN_INFO,
			"%s(): msm_pm_poll_state detected Modem reset\n",
			__func__);
		ret = -EAGAIN;
		goto power_collapse_restore_gpio_bail;
	}

#ifdef CONFIG_MSM_SM_EVENT
	if (!from_idle) {
		int64_t time;
		sm_set_system_state (SM_STATE_RESUME);
		sclk_resume_time = msm_timer_get_sclk_time(NULL);

		time = sclk_resume_time - sclk_suspend_time;
		if (time < 0)
			time += sclk_period;
		do_div (time, 1000000);//milli-second
		sm_add_event(SM_POWER_EVENT | SM_POWER_EVENT_RESUME, SM_EVENT_START, (uint32_t)time, (void *)msm_pm_smem_data, sizeof(*msm_pm_smem_data));
	}
#endif
	/* DEM Master == RUN */

	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): WFPI RUN");
	MSM_PM_DEBUG_PRINT_SLEEP_INFO();

	msm_pm_irq_extns->exit_sleep2(msm_pm_smem_data->irq_mask,
		msm_pm_smem_data->wakeup_reason,
		msm_pm_smem_data->pending_irqs);
	msm_pm_irq_extns->exit_sleep3(msm_pm_smem_data->irq_mask,
		msm_pm_smem_data->wakeup_reason,
		msm_pm_smem_data->pending_irqs);
	msm_gpio_exit_sleep();
	msm_sirc_exit_sleep();

	smsm_change_state(SMSM_APPS_DEM,
		DEM_SLAVE_SMSM_WFPI, DEM_SLAVE_SMSM_RUN);

	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): RUN");

	smd_sleep_exit();

	if (cpu_is_msm8625()) {
		ret = msm_spm_set_low_power_mode(MSM_SPM_MODE_CLOCK_GATING,
									false);
		WARN_ON(ret);
	}

	if (msm_cpr_ops)
		msm_cpr_ops->cpr_resume();

	return 0;

power_collapse_early_exit:
	/* Enter PWRC_EARLY_EXIT */

	smsm_change_state(SMSM_APPS_DEM,
		DEM_SLAVE_SMSM_PWRC | DEM_SLAVE_SMSM_PWRC_SUSPEND,
		DEM_SLAVE_SMSM_PWRC_EARLY_EXIT);

	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): EARLY_EXIT");

	memset(state_grps, 0, sizeof(state_grps));
	state_grps[0].group_id = SMSM_POWER_MASTER_DEM;
	state_grps[0].bits_all_set = DEM_MASTER_SMSM_PWRC_EARLY_EXIT;
	state_grps[1].group_id = SMSM_MODEM_STATE;
	state_grps[1].bits_all_set = SMSM_RESET;

	ret = msm_pm_poll_state(ARRAY_SIZE(state_grps), state_grps);
	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): EARLY_EXIT EE");

	if (ret < 0) {
		printk(KERN_EMERG "%s(): power collapse EARLY_EXIT "
			"timed out waiting for Modem's response\n", __func__);
		msm_pm_timeout();
	}

	if (ret == 1) {
		MSM_PM_DPRINTK(
			MSM_PM_DEBUG_SUSPEND|MSM_PM_DEBUG_POWER_COLLAPSE,
			KERN_INFO,
			"%s(): msm_pm_poll_state detected Modem reset\n",
			__func__);
	}

	/* DEM Master == RESET or PWRC_EARLY_EXIT */

	ret = -EAGAIN;

power_collapse_restore_gpio_bail:
	msm_gpio_exit_sleep();
	msm_sirc_exit_sleep();

	/* Enter RUN */
	smsm_change_state(SMSM_APPS_DEM,
		DEM_SLAVE_SMSM_PWRC | DEM_SLAVE_SMSM_PWRC_SUSPEND |
		DEM_SLAVE_SMSM_PWRC_EARLY_EXIT, DEM_SLAVE_SMSM_RUN);

	MSM_PM_DEBUG_PRINT_STATE("msm_pm_power_collapse(): RUN");

	if (collapsed)
		smd_sleep_exit();

	if (msm_cpr_ops)
		msm_cpr_ops->cpr_resume();

power_collapse_bail:
	if (cpu_is_msm8625()) {
		ret = msm_spm_set_low_power_mode(MSM_SPM_MODE_CLOCK_GATING,
									false);
		WARN_ON(ret);
	}

	return ret;
}
コード例 #5
0
ファイル: vfpmodule.c プロジェクト: Jazz-823/kernel_ayame
static int vfp_pm_suspend(struct sys_device *dev, pm_message_t state)
{
    vfp_flush_context();

    return 0;
}