コード例 #1
0
ファイル: AppMenu.cpp プロジェクト: kanbang/myexercise
void AppMenu::CreateMenus()
{
    CMDIFrameWnd* pMainFrame = acedGetAcadFrame();
    pMainFrame->LockWindowUpdate();

    //得到菜单栏上面的最后一个菜单
    CString sName;
    if( !GetLastMenuFromMenubar( sName ) )
        return;

    sName.Replace( _T( "&" ), _T( "" ) ); //debug

    IAcadMenuGroup* mnuGrp = NULL;
    if ( !GetAcadMenuGroup( &mnuGrp, sName ) )
        return ;

    //得到所有菜单组
    IAcadPopupMenus*   mnus = NULL;
    IAcadPopupMenu*   mnu = NULL;
    IAcadPopupMenuItem*  mnuitem = NULL;
    HRESULT hr = S_OK;
    hr = mnuGrp->get_Menus( &mnus );
    long cnt = 0l;
    hr = mnus->get_Count( &cnt );
    int i = 0;
    int j = 0;
    int k = 0;
    VARIANT index;
    VariantInit( &index );
    V_VT( &index ) = VT_I4;
    CArray<IAcadPopupMenu*, IAcadPopupMenu*> MnuAdrs;

    long lIndex = 0;
    TCHAR MenuName[256];
    for ( i = 0; i < m_menuCount; i++ )
    {
        CString tmpMenu = m_TopMenuNames[i];
        tmpMenu.Replace( _T( "&" ), _T( "" ) );
        if( IsMenuExist( mnu, lIndex, tmpMenu, mnus ) ) //处理二次加载
        {
            V_I4( &index ) = lIndex;
        }
        else
        {
            //			MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, (LPTSTR)(LPCTSTR)m_TopMenuNames[i], -1, MenuName, 256);
            _tcscpy( MenuName, m_TopMenuNames[i] );
            mnus->Add( MenuName, &mnu );
            V_I4( &index ) = cnt++;
        }

        MnuAdrs.Add( mnu );
        mnu->InsertInMenuBar( index );
    }

    IAcadPopupMenu* MenuItem = NULL;
    int subMenuNum = 0;
    CCADMenuArray* Menus;
    TCHAR szSubMenu[256];
    TCHAR szSubMenuMacro[256];
    CString MenusName;
    CString Menusorder;
    for ( j = 0; j < m_menuCount; j++ )
    {
        Menus = m_menus.GetAt( j );
        subMenuNum = Menus->GetSize();
        for ( k = 0; k < subMenuNum; k++ )
        {
            mnu = MnuAdrs.GetAt( j );
            if ( !_tcscmp( _T( "--" ), Menus->GetAt( k )->name ) )
            {
                V_I4( &index ) = k;
                mnu->AddSeparator( index, &mnuitem );
            }
            else
            {
                V_I4( &index ) = k;
                MenusName = Menus->GetAt( k )->name;
                Menusorder = Menus->GetAt( k )->order;
                _tcscpy( szSubMenu, MenusName );
                _tcscpy( szSubMenuMacro, Menusorder );
                //MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, (LPTSTR)(LPCTSTR)MenusName, -1, szSubMenu, 256);
                //MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, (LPTSTR)(LPCTSTR)Menusorder, -1, szSubMenuMacro, 256);
                if ( _tcscspn( Menus->GetAt( k )->name, _T( "*" ) ) < ( size_t )MenusName.GetLength() )
                {
                    MenusName.TrimLeft( _T( '*' ) );
                    //					MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, (LPTSTR)(LPCTSTR)MenusName, -1, szSubMenu, 256);
                    _tcscpy( szSubMenu, MenusName );
                    hr = mnu->AddSubMenu( index, szSubMenu, &MenuItem );
                }
                else if ( _tcscspn( Menus->GetAt( k )->name, _T( "$" ) ) < ( size_t )MenusName.GetLength() )
                {
                    MenusName.TrimLeft( _T( '$' ) );
                    if( MenusName.Compare( _T( "--" ) ) == 0 ) //添加子菜单的分隔符
                    {
                        hr = MenuItem->AddSeparator( index, &mnuitem );
                    }
                    else
                    {
                        //MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED, (LPTSTR)(LPCTSTR)MenusName, -1, szSubMenu, 256);
                        _tcscpy( szSubMenu, MenusName );
                        hr = MenuItem->AddMenuItem( index, szSubMenu, szSubMenuMacro, &mnuitem );
                    }
                }
                else
                {
                    hr = mnu->AddMenuItem( index, szSubMenu, szSubMenuMacro, &mnuitem );
                }
            }
        }
    }

    for ( i = 0; i < MnuAdrs.GetSize(); i++ )
    {
        MnuAdrs[i]->Release();
    }
    mnuitem->Release();
    mnus->Release();
    mnuGrp->Release();
    pMainFrame->UnlockWindowUpdate();

    stcMyTopMenuNames.Copy( m_TopMenuNames ); //将顶级菜单名存入静态数组中,卸载时使用

    //return ;
}
コード例 #2
0
ファイル: ArxToolBar.cpp プロジェクト: kanbang/myexercise
void ArxToolBar::CreateToolBars( const TCHAR* bmpDir )
{
    CMDIFrameWnd* pMainFrame = acedGetAcadFrame();
    pMainFrame->LockWindowUpdate();

    // 获取主菜单组
    IAcadMenuGroup* mnuGrp = NULL;
    if ( !GetAcadMenuGroup( &mnuGrp ) )
        return ;

    //得到所有菜单组
    HRESULT hr = S_OK;
    IAcadToolbars* acToolbars = NULL;
    hr = mnuGrp->get_Toolbars( &acToolbars );

    // 如果bmpDir路径没有反斜杠(\),则添加一个反斜杠
    CString path( bmpDir );
    // 取最后一个字符
    if( path.Right( 1 ) != _T( "\\" ) )
    {
        path.Format( _T( "%s\\" ), bmpDir );
    }

    VARIANT index;
    VariantInit( &index );
    V_VT( &index ) = VT_I4;

    TCHAR MenuName[256];
    int delta = 30; // 工具栏间距
    int top = 200, left = 200;
    for ( int i = 0; i < m_menuCount; i++ )
    {
        IAcadToolbar* acToolbar = NULL;
        _tcscpy( MenuName, m_TopMenuNames[i] );
        hr = acToolbars->Add( MenuName, &acToolbar );

        acToolbar->put_Visible( true );
        acToolbar->Dock( acToolbarFloating );
        acToolbar->Float( top + i * delta, left, 1 );

        CCADToolButtonArray* Menus = m_menus[i];
        COleVariant flyOutButton;
        for ( int j = 0; j < Menus->GetSize(); j++ )
        {
            // 添加按钮
            V_I4( &index ) = ( long )j;
            CADToolButton* btn = Menus->GetAt( j );
            IAcadToolbarItem* acToolbarItem = NULL;

            if( _tcscmp( _T( "--" ), btn->name ) == 0 )
            {
                hr = acToolbar->AddSeparator( index, &acToolbarItem );
            }
            else
            {
                hr = acToolbar->AddToolbarButton( index, btn->name, btn->help, btn->order, flyOutButton, &acToolbarItem );

                TCHAR szBmpFile[256];
                _stprintf( szBmpFile, _T( "%s%s" ), path, btn->bmp );
                //acutPrintf(_T("\n路径:%s"), szBmpFile);

                hr = acToolbarItem->SetBitmaps( szBmpFile, szBmpFile );
            }
        }
        //acToolbarItem->Release();
        acToolbar->Release();
    }

    acToolbars->Release();
    mnuGrp->Release();
    pMainFrame->UnlockWindowUpdate();

    //stcMyToolBarNames.Copy(m_TopMenuNames); //将工具栏名称存入静态数组中,卸载时使用
}
コード例 #3
0
ファイル: AppToolBar.cpp プロジェクト: kanbang/myexercise
void AppToolBar::CreateToolBars()
{
    CMDIFrameWnd* pMainFrame = acedGetAcadFrame();
    pMainFrame->LockWindowUpdate();

    // 获取主菜单组
    IAcadMenuGroup* mnuGrp = NULL;
    if ( !GetAcadMenuGroup( &mnuGrp ) )
        return ;

    //得到所有菜单组
    HRESULT hr = S_OK;
    IAcadToolbars* acToolbars = NULL;
    hr = mnuGrp->get_Toolbars( &acToolbars );

    CString appFileName = acedGetAppName(); //取出完整的应用程序名称,含路径
    TCHAR dir[_MAX_DIR], drive[_MAX_DRIVE], path[_MAX_PATH];
    _tsplitpath( appFileName, drive, dir, NULL, NULL );
    _tmakepath( path, drive, dir, NULL, NULL );

    VARIANT index;
    VariantInit( &index );
    V_VT( &index ) = VT_I4;

    TCHAR MenuName[256];
    int delta = 30; // 工具栏间距
    int top = 200, left = 200;
    for ( int i = 0; i < m_menuCount; i++ )
    {
        IAcadToolbar* acToolbar = NULL;
        _tcscpy( MenuName, m_TopMenuNames[i] );
        hr = acToolbars->Add( MenuName, &acToolbar );

        acToolbar->put_Visible( true );
        acToolbar->Dock( acToolbarFloating );
        acToolbar->Float( top + i * delta, left, 1 );

        CCADToolButtonArray* Menus = m_menus[i];
        COleVariant flyOutButton;
        for ( int j = 0; j < Menus->GetSize(); j++ )
        {
            // 添加按钮
            V_I4( &index ) = ( long )j;
            CADToolButton* btn = Menus->GetAt( j );
            IAcadToolbarItem* acToolbarItem = NULL;

            if( _tcscmp( _T( "--" ), btn->name ) == 0 )
            {
                hr = acToolbar->AddSeparator( index, &acToolbarItem );
            }
            else
            {
                hr = acToolbar->AddToolbarButton( index, btn->name, btn->help, btn->order, flyOutButton, &acToolbarItem );

                CString bmpFile;
                bmpFile.Format( _T( "%s%s\\%s" ), path, BMP_DIR, btn->bmp );


                TCHAR szBmpFile[256];
                _tcscpy( szBmpFile, bmpFile );

                //acutPrintf(_T("\n路径:%s"), szBmpFile);
                hr = acToolbarItem->SetBitmaps( szBmpFile, szBmpFile );
            }
        }
        //acToolbarItem->Release();
        acToolbar->Release();
    }

    acToolbars->Release();
    mnuGrp->Release();
    pMainFrame->UnlockWindowUpdate();

    stcMyToolBarNames.Copy( m_TopMenuNames ); //将工具栏名称存入静态数组中,卸载时使用
}