void CMiniMap::SetCameraPos()
{
CTerrain* terrain = g_Game->GetWorld()->GetTerrain();
CVector3D target;
GetMouseWorldCoordinates(target.X, target.Z);
target.Y = terrain->GetExactGroundLevel(target.X, target.Z);
g_Game->GetView()->MoveCameraTarget(target);
}
// This requires m_DistanceHeightmap to be defined properly.
void WaterManager::CreateWaveMeshes()
{
size_t SideSize = m_MapSize*2;
CTerrain* terrain = g_Game->GetWorld()->GetTerrain();
for (WaveObject* const& obj : m_ShoreWaves)
{
if (obj->m_VBvertices)
g_VBMan.Release(obj->m_VBvertices);
delete obj;
}
m_ShoreWaves.clear();
if (m_ShoreWaves_VBIndices)
{
g_VBMan.Release(m_ShoreWaves_VBIndices);
m_ShoreWaves_VBIndices = NULL;
}
if (m_Waviness < 5.0f && m_WaterType != L"ocean")
return;
// First step: get the points near the coast.
std::set<int> CoastalPointsSet;
for (size_t z = 1; z < SideSize-1; ++z)
for (size_t x = 1; x < SideSize-1; ++x)
if (fabs(m_DistanceHeightmap[z*SideSize + x]-1.0f) < 0.2f)
CoastalPointsSet.insert(z*SideSize + x);
// Second step: create chains out of those coastal points.
static const int around[8][2] = { { -1,-1 }, { -1,0 }, { -1,1 }, { 0,1 }, { 1,1 }, { 1,0 }, { 1,-1 }, { 0,-1 } };
std::vector<std::deque<CoastalPoint> > CoastalPointsChains;
while (!CoastalPointsSet.empty())
{
int index = *(CoastalPointsSet.begin());
int x = index % SideSize;
int y = (index - x ) / SideSize;
std::deque<CoastalPoint> Chain;
Chain.push_front(CoastalPoint(index,CVector2D(x*2,y*2)));
// Erase us.
CoastalPointsSet.erase(CoastalPointsSet.begin());
// We're our starter points. At most we can have 2 points close to us.
// We'll pick the first one and look for its neighbors (he can only have one new)
// Up until we either reach the end of the chain, or ourselves.
// Then go down the other direction if there is any.
int neighbours[2] = { -1, -1 };
int nbNeighb = 0;
for (int i = 0; i < 8; ++i)
{
if (CoastalPointsSet.count(x + around[i][0] + (y + around[i][1])*SideSize))
{
if (nbNeighb < 2)
neighbours[nbNeighb] = x + around[i][0] + (y + around[i][1])*SideSize;
++nbNeighb;
}
}
if (nbNeighb > 2)
continue;
for (int i = 0; i < 2; ++i)
{
if (neighbours[i] == -1)
continue;
// Move to our neighboring point
int xx = neighbours[i] % SideSize;
int yy = (neighbours[i] - xx ) / SideSize;
int indexx = xx + yy*SideSize;
int endedChain = false;
if (i == 0)
Chain.push_back(CoastalPoint(indexx,CVector2D(xx*2,yy*2)));
else
Chain.push_front(CoastalPoint(indexx,CVector2D(xx*2,yy*2)));
// If there's a loop we'll be the "other" neighboring point already so check for that.
// We'll readd at the end/front the other one to have full squares.
if (CoastalPointsSet.count(indexx) == 0)
break;
CoastalPointsSet.erase(indexx);
// Start checking from there.
while(!endedChain)
{
bool found = false;
nbNeighb = 0;
for (int p = 0; p < 8; ++p)
{
if (CoastalPointsSet.count(xx+around[p][0] + (yy + around[p][1])*SideSize))
{
if (nbNeighb >= 2)
{
CoastalPointsSet.erase(xx + yy*SideSize);
continue;
}
++nbNeighb;
// We've found a new point around us.
// Move there
xx = xx + around[p][0];
yy = yy + around[p][1];
indexx = xx + yy*SideSize;
if (i == 0)
Chain.push_back(CoastalPoint(indexx,CVector2D(xx*2,yy*2)));
else
Chain.push_front(CoastalPoint(indexx,CVector2D(xx*2,yy*2)));
CoastalPointsSet.erase(xx + yy*SideSize);
found = true;
break;
}
}
if (!found)
endedChain = true;
}
}
if (Chain.size() > 10)
CoastalPointsChains.push_back(Chain);
}
// (optional) third step: Smooth chains out.
// This is also really dumb.
for (size_t i = 0; i < CoastalPointsChains.size(); ++i)
{
// Bump 1 for smoother.
for (int p = 0; p < 3; ++p)
{
for (size_t j = 1; j < CoastalPointsChains[i].size()-1; ++j)
{
CVector2D realPos = CoastalPointsChains[i][j-1].position + CoastalPointsChains[i][j+1].position;
CoastalPointsChains[i][j].position = (CoastalPointsChains[i][j].position + realPos/2.0f)/2.0f;
}
}
}
// Fourth step: create waves themselves, using those chains. We basically create subchains.
size_t waveSizes = 14; // maximal size in width.
// Construct indices buffer (we can afford one for all of them)
std::vector<GLushort> water_indices;
for (size_t a = 0; a < waveSizes-1;++a)
{
for (size_t rect = 0; rect < 7; ++rect)
{
water_indices.push_back(a*9 + rect);
water_indices.push_back(a*9 + 9 + rect);
water_indices.push_back(a*9 + 1 + rect);
water_indices.push_back(a*9 + 9 + rect);
water_indices.push_back(a*9 + 10 + rect);
water_indices.push_back(a*9 + 1 + rect);
}
}
// Generic indexes, max-length
m_ShoreWaves_VBIndices = g_VBMan.Allocate(sizeof(GLushort), water_indices.size(), GL_STATIC_DRAW, GL_ELEMENT_ARRAY_BUFFER);
m_ShoreWaves_VBIndices->m_Owner->UpdateChunkVertices(m_ShoreWaves_VBIndices, &water_indices[0]);
float diff = (rand() % 50) / 5.0f;
for (size_t i = 0; i < CoastalPointsChains.size(); ++i)
{
for (size_t j = 0; j < CoastalPointsChains[i].size()-waveSizes; ++j)
{
if (CoastalPointsChains[i].size()- 1 - j < waveSizes)
break;
size_t width = waveSizes;
// First pass to get some parameters out.
float outmost = 0.0f; // how far to move on the shore.
float avgDepth = 0.0f;
int sign = 1;
CVector2D firstPerp(0,0), perp(0,0), lastPerp(0,0);
for (size_t a = 0; a < waveSizes;++a)
{
lastPerp = perp;
perp = CVector2D(0,0);
int nb = 0;
CVector2D pos = CoastalPointsChains[i][j+a].position;
CVector2D posPlus;
CVector2D posMinus;
if (a > 0)
{
++nb;
posMinus = CoastalPointsChains[i][j+a-1].position;
perp += pos-posMinus;
}
if (a < waveSizes-1)
{
++nb;
posPlus = CoastalPointsChains[i][j+a+1].position;
perp += posPlus-pos;
}
perp /= nb;
perp = CVector2D(-perp.Y,perp.X).Normalized();
if (a == 0)
firstPerp = perp;
if ( a > 1 && perp.Dot(lastPerp) < 0.90f && perp.Dot(firstPerp) < 0.70f)
{
width = a+1;
break;
}
if (m_BlurredNormalMap[ (int)(pos.X/4) + (int)(pos.Y/4)*m_MapSize].Y < 0.9)
{
width = a-1;
break;
}
if (terrain->GetExactGroundLevel(pos.X+perp.X*1.5f, pos.Y+perp.Y*1.5f) > m_WaterHeight)
sign = -1;
avgDepth += terrain->GetExactGroundLevel(pos.X+sign*perp.X*20.0f, pos.Y+sign*perp.Y*20.0f) - m_WaterHeight;
float localOutmost = -2.0f;
while (localOutmost < 0.0f)
{
float depth = terrain->GetExactGroundLevel(pos.X+sign*perp.X*localOutmost, pos.Y+sign*perp.Y*localOutmost) - m_WaterHeight;
if (depth < 0.0f || depth > 0.6f)
localOutmost += 0.2f;
else
break;
}
outmost += localOutmost;
}
if (width < 5)
{
j += 6;
continue;
}
outmost /= width;
if (outmost > -0.5f)
{
j += 3;
continue;
}
outmost = -0.5f + outmost * m_Waviness/10.0f;
avgDepth /= width;
if (avgDepth > -1.3f)
{
j += 3;
continue;
}
// we passed the checks, we can create a wave of size "width".
WaveObject* shoreWave = new WaveObject;
std::vector<SWavesVertex> vertices;
shoreWave->m_Width = width;
shoreWave->m_TimeDiff = diff;
diff += (rand() % 100) / 25.0f + 4.0f;
for (size_t a = 0; a < width;++a)
{
CVector2D perp = CVector2D(0,0);
int nb = 0;
CVector2D pos = CoastalPointsChains[i][j+a].position;
CVector2D posPlus;
CVector2D posMinus;
if (a > 0)
{
++nb;
posMinus = CoastalPointsChains[i][j+a-1].position;
perp += pos-posMinus;
}
if (a < waveSizes-1)
{
++nb;
posPlus = CoastalPointsChains[i][j+a+1].position;
perp += posPlus-pos;
}
perp /= nb;
perp = CVector2D(-perp.Y,perp.X).Normalized();
SWavesVertex point[9];
float baseHeight = 0.04f;
float halfWidth = (width-1.0f)/2.0f;
float sideNess = sqrtf(clamp( (halfWidth - fabsf(a-halfWidth))/3.0f, 0.0f,1.0f));
point[0].m_UV[0] = a; point[0].m_UV[1] = 8;
point[1].m_UV[0] = a; point[1].m_UV[1] = 7;
point[2].m_UV[0] = a; point[2].m_UV[1] = 6;
point[3].m_UV[0] = a; point[3].m_UV[1] = 5;
point[4].m_UV[0] = a; point[4].m_UV[1] = 4;
point[5].m_UV[0] = a; point[5].m_UV[1] = 3;
point[6].m_UV[0] = a; point[6].m_UV[1] = 2;
point[7].m_UV[0] = a; point[7].m_UV[1] = 1;
point[8].m_UV[0] = a; point[8].m_UV[1] = 0;
point[0].m_PerpVect = perp;
point[1].m_PerpVect = perp;
point[2].m_PerpVect = perp;
point[3].m_PerpVect = perp;
point[4].m_PerpVect = perp;
point[5].m_PerpVect = perp;
point[6].m_PerpVect = perp;
point[7].m_PerpVect = perp;
point[8].m_PerpVect = perp;
static const float perpT1[9] = { 6.0f, 6.05f, 6.1f, 6.2f, 6.3f, 6.4f, 6.5f, 6.6f, 9.7f };
static const float perpT2[9] = { 2.0f, 2.1f, 2.2f, 2.3f, 2.4f, 3.0f, 3.3f, 3.6f, 9.5f };
static const float perpT3[9] = { 1.1f, 0.7f, -0.2f, 0.0f, 0.6f, 1.3f, 2.2f, 3.6f, 9.0f };
static const float perpT4[9] = { 2.0f, 2.1f, 1.2f, 1.5f, 1.7f, 1.9f, 2.7f, 3.8f, 9.0f };
static const float heightT1[9] = { 0.0f, 0.2f, 0.5f, 0.8f, 0.9f, 0.85f, 0.6f, 0.2f, 0.0 };
static const float heightT2[9] = { -0.8f, -0.4f, 0.0f, 0.1f, 0.1f, 0.03f, 0.0f, 0.0f, 0.0 };
static const float heightT3[9] = { 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0 };
for (size_t t = 0; t < 9; ++t)
{
float terrHeight = 0.05f + terrain->GetExactGroundLevel(pos.X+sign*perp.X*(perpT1[t]+outmost),
pos.Y+sign*perp.Y*(perpT1[t]+outmost));
point[t].m_BasePosition = CVector3D(pos.X+sign*perp.X*(perpT1[t]+outmost), baseHeight + heightT1[t]*sideNess + std::max(m_WaterHeight,terrHeight),
pos.Y+sign*perp.Y*(perpT1[t]+outmost));
}
for (size_t t = 0; t < 9; ++t)
{
float terrHeight = 0.05f + terrain->GetExactGroundLevel(pos.X+sign*perp.X*(perpT2[t]+outmost),
pos.Y+sign*perp.Y*(perpT2[t]+outmost));
point[t].m_ApexPosition = CVector3D(pos.X+sign*perp.X*(perpT2[t]+outmost), baseHeight + heightT1[t]*sideNess + std::max(m_WaterHeight,terrHeight),
pos.Y+sign*perp.Y*(perpT2[t]+outmost));
}
for (size_t t = 0; t < 9; ++t)
{
float terrHeight = 0.05f + terrain->GetExactGroundLevel(pos.X+sign*perp.X*(perpT3[t]+outmost*sideNess),
pos.Y+sign*perp.Y*(perpT3[t]+outmost*sideNess));
point[t].m_SplashPosition = CVector3D(pos.X+sign*perp.X*(perpT3[t]+outmost*sideNess), baseHeight + heightT2[t]*sideNess + std::max(m_WaterHeight,terrHeight), pos.Y+sign*perp.Y*(perpT3[t]+outmost*sideNess));
}
for (size_t t = 0; t < 9; ++t)
{
float terrHeight = 0.05f + terrain->GetExactGroundLevel(pos.X+sign*perp.X*(perpT4[t]+outmost),
pos.Y+sign*perp.Y*(perpT4[t]+outmost));
point[t].m_RetreatPosition = CVector3D(pos.X+sign*perp.X*(perpT4[t]+outmost), baseHeight + heightT3[t]*sideNess + std::max(m_WaterHeight,terrHeight),
pos.Y+sign*perp.Y*(perpT4[t]+outmost));
}
vertices.push_back(point[8]);
vertices.push_back(point[7]);
vertices.push_back(point[6]);
vertices.push_back(point[5]);
vertices.push_back(point[4]);
vertices.push_back(point[3]);
vertices.push_back(point[2]);
vertices.push_back(point[1]);
vertices.push_back(point[0]);
shoreWave->m_AABB += point[8].m_SplashPosition;
shoreWave->m_AABB += point[8].m_BasePosition;
shoreWave->m_AABB += point[0].m_SplashPosition;
shoreWave->m_AABB += point[0].m_BasePosition;
shoreWave->m_AABB += point[4].m_ApexPosition;
}
if (sign == 1)
{
// Let's do some fancy reversing.
std::vector<SWavesVertex> reversed;
for (int a = width-1; a >= 0; --a)
{
for (size_t t = 0; t < 9; ++t)
reversed.push_back(vertices[a*9+t]);
}
vertices = reversed;
}
j += width/2-1;
shoreWave->m_VBvertices = g_VBMan.Allocate(sizeof(SWavesVertex), vertices.size(), GL_STATIC_DRAW, GL_ARRAY_BUFFER);
shoreWave->m_VBvertices->m_Owner->UpdateChunkVertices(shoreWave->m_VBvertices, &vertices[0]);
m_ShoreWaves.push_back(shoreWave);
}
}
}
///////////////////////////////////////////////////////////////////
// Calculate our binary heightmap from the terrain heightmap.
void WaterManager::RecomputeDistanceHeightmap()
{
size_t SideSize = m_MapSize*2;
if (m_DistanceHeightmap == NULL)
m_DistanceHeightmap = new float[SideSize*SideSize];
CTerrain* terrain = g_Game->GetWorld()->GetTerrain();
// Create a manhattan-distance heightmap.
// This is currently upsampled by a factor of 2 to get more precision
// This could be refined to only be done near the coast itself, but it's probably not necessary.
for (size_t z = 0; z < SideSize; ++z)
{
float level = SideSize;
for (size_t x = 0; x < SideSize; ++x)
m_DistanceHeightmap[z*SideSize + x] = terrain->GetExactGroundLevel(x*2, z*2) >= m_WaterHeight ? level = 0.f : ++level;
level = SideSize;
for (size_t x = SideSize-1; x != (size_t)-1; --x)
{
if (terrain->GetExactGroundLevel(x*2, z*2) >= m_WaterHeight)
level = 0.f;
else
{
++level;
if (level < m_DistanceHeightmap[z*SideSize + x])
m_DistanceHeightmap[z*SideSize + x] = level;
}
}
}
for (size_t x = 0; x < SideSize; ++x)
{
float level = SideSize;
for (size_t z = 0; z < SideSize; ++z)
{
if (terrain->GetExactGroundLevel(x*2, z*2) >= m_WaterHeight)
level = 0.f;
else if (level > m_DistanceHeightmap[z*SideSize + x])
level = m_DistanceHeightmap[z*SideSize + x];
else
{
++level;
if (level < m_DistanceHeightmap[z*SideSize + x])
m_DistanceHeightmap[z*SideSize + x] = level;
}
}
level = SideSize;
for (size_t z = SideSize-1; z != (size_t)-1; --z)
{
if (terrain->GetExactGroundLevel(x*2, z*2) >= m_WaterHeight)
level = 0.f;
else if (level > m_DistanceHeightmap[z*SideSize + x])
level = m_DistanceHeightmap[z*SideSize + x];
else
{
++level;
if (level < m_DistanceHeightmap[z*SideSize + x])
m_DistanceHeightmap[z*SideSize + x] = level;
}
}
}
}
///////////////////////////////////////////////////////////////////
// Create information about the terrain and wave vertices.
void WaterManager::CreateSuperfancyInfo(CSimulation2* simulation)
{
if (m_VBWaves)
{
g_VBMan.Release(m_VBWaves);
m_VBWaves = NULL;
}
if (m_VBWavesIndices)
{
g_VBMan.Release(m_VBWavesIndices);
m_VBWavesIndices = NULL;
}
CTerrain* terrain = g_Game->GetWorld()->GetTerrain();
ssize_t mapSize = terrain->GetVerticesPerSide();
CmpPtr<ICmpWaterManager> cmpWaterManager(*simulation, SYSTEM_ENTITY);
if (!cmpWaterManager)
return; // REALLY shouldn't happen and will most likely crash.
// Using this to get some more optimization on circular maps
CmpPtr<ICmpRangeManager> cmpRangeManager(*simulation, SYSTEM_ENTITY);
if (!cmpRangeManager)
return;
bool circular = cmpRangeManager->GetLosCircular();
float mSize = mapSize*mapSize;
float halfSize = (mapSize/2.0);
// Warning: this won't work with multiple water planes
m_WaterHeight = cmpWaterManager->GetExactWaterLevel(0,0);
// TODO: change this whenever we incrementally update because it's def. not too efficient
delete[] m_WaveX;
delete[] m_WaveZ;
delete[] m_DistanceToShore;
delete[] m_FoamFactor;
m_WaveX = new float[mapSize*mapSize];
m_WaveZ = new float[mapSize*mapSize];
m_DistanceToShore = new float[mapSize*mapSize];
m_FoamFactor = new float[mapSize*mapSize];
u16* heightmap = terrain->GetHeightMap();
// some temporary stuff for wave intensity
// not really used too much right now.
u8* waveForceHQ = new u8[mapSize*mapSize];
u16 waterHeightInu16 = m_WaterHeight/HEIGHT_SCALE;
// used to cache terrain normals since otherwise we'd recalculate them a lot (I'm blurring the "normal" map).
// this might be updated to actually cache in the terrain manager but that's not for now.
CVector3D* normals = new CVector3D[mapSize*mapSize];
// calculate wave force (not really used right now)
// and puts into "normals" the terrain normal at that point
// so as to avoid recalculating terrain normals too often.
for (ssize_t i = 0; i < mapSize; ++i)
{
for (ssize_t j = 0; j < mapSize; ++j)
{
normals[j*mapSize + i] = terrain->CalcExactNormal(((float)i)*4.0f,((float)j)*4.0f);
if (circular && (i-halfSize)*(i-halfSize)+(j-halfSize)*(j-halfSize) > mSize)
{
waveForceHQ[j*mapSize + i] = 255;
continue;
}
u8 color = 0;
for (int v = 0; v <= 18; v += 3){
if (j-v >= 0 && i-v >= 0 && heightmap[(j-v)*mapSize + i-v] > waterHeightInu16)
{
if (color == 0)
color = 5;
else
color++;
}
}
waveForceHQ[j*mapSize + i] = 255 - color * 40;
}
}
// this creates information for waves and stores it in float arrays. PatchRData then puts it in the vertex info for speed.
for (ssize_t i = 0; i < mapSize; ++i)
{
for (ssize_t j = 0; j < mapSize; ++j)
{
if (circular && (i-halfSize)*(i-halfSize)+(j-halfSize)*(j-halfSize) > mSize)
{
m_WaveX[j*mapSize + i] = 0.0f;
m_WaveZ[j*mapSize + i] = 0.0f;
m_DistanceToShore[j*mapSize + i] = 100;
m_FoamFactor[j*mapSize + i] = 0.0f;
continue;
}
float depth = m_WaterHeight - heightmap[j*mapSize + i]*HEIGHT_SCALE;
int distanceToShore = 10000;
// calculation of the distance to the shore.
// TODO: this is fairly dumb, though it returns a good result
// Could be sped up a fair bit.
if (depth >= 0)
{
// check in the square around.
for (int xx = -5; xx <= 5; ++xx)
{
for (int yy = -5; yy <= 5; ++yy)
{
if (i+xx >= 0 && i + xx < mapSize)
if (j + yy >= 0 && j + yy < mapSize)
{
float hereDepth = m_WaterHeight - heightmap[(j+yy)*mapSize + (i+xx)]*HEIGHT_SCALE;
if (hereDepth < 0 && xx*xx + yy*yy < distanceToShore)
distanceToShore = xx*xx + yy*yy;
}
}
}
// refine the calculation if we're close enough
if (distanceToShore < 9)
{
for (float xx = -2.5f; xx <= 2.5f; ++xx)
{
for (float yy = -2.5f; yy <= 2.5f; ++yy)
{
float hereDepth = m_WaterHeight - terrain->GetExactGroundLevel( (i+xx)*4, (j+yy)*4 );
if (hereDepth < 0 && xx*xx + yy*yy < distanceToShore)
distanceToShore = xx*xx + yy*yy;
}
}
}
}
else
{
for (int xx = -2; xx <= 2; ++xx)
{
for (int yy = -2; yy <= 2; ++yy)
{
float hereDepth = m_WaterHeight - terrain->GetVertexGroundLevel(i+xx, j+yy);
if (hereDepth > 0)
distanceToShore = 0;
}
}
}
// speedup with default values for land squares
if (distanceToShore == 10000)
{
m_WaveX[j*mapSize + i] = 0.0f;
m_WaveZ[j*mapSize + i] = 0.0f;
m_DistanceToShore[j*mapSize + i] = 100;
m_FoamFactor[j*mapSize + i] = 0.0f;
continue;
}
// We'll compute the normals and the "water raise", to know about foam
// Normals are a pretty good calculation but it's slow since we normalize so much.
CVector3D normal;
int waterRaise = 0;
for (int xx = -4; xx <= 4; xx += 2) // every 2 tile is good enough.
{
for (int yy = -4; yy <= 4; yy += 2)
{
if (j+yy < mapSize && i+xx < mapSize && i+xx >= 0 && j+yy >= 0)
normal += normals[(j+yy)*mapSize + (i+xx)];
if (terrain->GetVertexGroundLevel(i+xx,j+yy) < heightmap[j*mapSize + i]*HEIGHT_SCALE)
waterRaise += heightmap[j*mapSize + i]*HEIGHT_SCALE - terrain->GetVertexGroundLevel(i+xx,j+yy);
}
}
// normalizes the terrain info to avoid foam moving at too different speeds.
normal *= 0.012345679f;
normal[1] = 0.1f;
normal = normal.Normalized();
m_WaveX[j*mapSize + i] = normal[0];
m_WaveZ[j*mapSize + i] = normal[2];
// distance is /5.0 to be a [0,1] value.
m_DistanceToShore[j*mapSize + i] = sqrtf(distanceToShore)/5.0f; // TODO: this can probably be cached as I'm integer here.
// computing the amount of foam I want
depth = clamp(depth,0.0f,10.0f);
float foamAmount = (waterRaise/255.0f) * (1.0f - depth/10.0f) * (waveForceHQ[j*mapSize+i]/255.0f) * (m_Waviness/8.0f);
foamAmount += clamp(m_Waviness/2.0f - distanceToShore,0.0f,m_Waviness/2.0f)/(m_Waviness/2.0f) * clamp(m_Waviness/9.0f,0.3f,1.0f);
foamAmount = foamAmount > 1.0f ? 1.0f: foamAmount;
m_FoamFactor[j*mapSize + i] = foamAmount;
}
}
delete[] normals;
delete[] waveForceHQ;
// TODO: The rest should be cleaned up
// okay let's create the waves squares. i'll divide the map in arbitrary squares
// For each of these squares, check if waves are needed.
// If yes, look for the best positionning (in order to have a nice blending with the shore)
// Then clean-up: remove squares that are too close to each other
std::vector<CVector2D> waveSquares;
int size = 8; // I think this is the size of the squares.
for (int i = 0; i < mapSize/size; ++i)
{
for (int j = 0; j < mapSize/size; ++j)
{
int landTexel = 0;
int waterTexel = 0;
CVector3D avnormal (0.0f,0.0f,0.0f);
CVector2D landPosition(0.0f,0.0f);
CVector2D waterPosition(0.0f,0.0f);
for (int xx = 0; xx < size; ++xx)
{
for (int yy = 0; yy < size; ++yy)
{
if (terrain->GetVertexGroundLevel(i*size+xx,j*size+yy) > m_WaterHeight)
{
landTexel++;
landPosition += CVector2D(i*size+xx,j*size+yy);
}
else
{
waterPosition += CVector2D(i*size+xx,j*size+yy);
waterTexel++;
avnormal += terrain->CalcExactNormal( (i*size+xx)*4.0f,(j*size+yy)*4.0f);
}
}
}
if (landTexel < size/2)
continue;
landPosition /= landTexel;
waterPosition /= waterTexel;
avnormal[1] = 1.0f;
avnormal.Normalize();
avnormal[1] = 0.0f;
// this should help ensure that the shore is pretty flat.
if (avnormal.Length() <= 0.2f)
continue;
// To get the best position for squares, I start at the mean "ocean" position
// And step by step go to the mean "land" position. I keep the position where I change from water to land.
// If this never happens, the square is scrapped.
if (terrain->GetExactGroundLevel(waterPosition.X*4.0f,waterPosition.Y*4.0f) > m_WaterHeight)
continue;
CVector2D squarePos(-1,-1);
for (u8 i = 0; i < 40; i++)
{
squarePos = landPosition * (i/40.0f) + waterPosition * (1.0f-(i/40.0f));
if (terrain->GetExactGroundLevel(squarePos.X*4.0f,squarePos.Y*4.0f) > m_WaterHeight)
break;
}
if (squarePos.X == -1)
continue;
u8 enter = 1;
// okaaaaaay. Got a square. Check for proximity.
for (unsigned long i = 0; i < waveSquares.size(); i++)
{
if ( CVector2D(waveSquares[i]-squarePos).LengthSquared() < 80) {
enter = 0;
break;
}
}
if (enter == 1)
waveSquares.push_back(squarePos);
}
}
// Actually create the waves' meshes.
std::vector<SWavesVertex> waves_vertex_data;
std::vector<GLushort> waves_indices;
// loop through each square point. Look in the square around it, calculate the normal
// create the square.
for (unsigned long i = 0; i < waveSquares.size(); i++)
{
CVector2D pos(waveSquares[i]);
CVector3D avgnorm(0.0f,0.0f,0.0f);
for (int xx = -size/2; xx < size/2; ++xx)
{
for (int yy = -size/2; yy < size/2; ++yy)
{
avgnorm += terrain->CalcExactNormal((pos.X+xx)*4.0f,(pos.Y+yy)*4.0f);
}
}
avgnorm[1] = 0.1f;
// okay crank out a square.
// we have the direction of the square. We'll get the perpendicular vector too
CVector2D perp(-avgnorm[2],avgnorm[0]);
perp = perp.Normalized();
avgnorm = avgnorm.Normalized();
SWavesVertex vertex[4];
vertex[0].m_Position = CVector3D(pos.X + perp.X*(size/2.2f) - avgnorm[0]*1.0f, 0.0f,pos.Y + perp.Y*(size/2.2f) - avgnorm[2]*1.0f);
vertex[0].m_Position *= 4.0f;
vertex[0].m_Position.Y = m_WaterHeight + 1.0f;
vertex[0].m_UV[1] = 1;
vertex[0].m_UV[0] = 0;
vertex[1].m_Position = CVector3D(pos.X - perp.X*(size/2.2f) - avgnorm[0]*1.0f, 0.0f,pos.Y - perp.Y*(size/2.2f) - avgnorm[2]*1.0f);
vertex[1].m_Position *= 4.0f;
vertex[1].m_Position.Y = m_WaterHeight + 1.0f;
vertex[1].m_UV[1] = 1;
vertex[1].m_UV[0] = 1;
vertex[3].m_Position = CVector3D(pos.X + perp.X*(size/2.2f) + avgnorm[0]*(size/1.5f), 0.0f,pos.Y + perp.Y*(size/2.2f) + avgnorm[2]*(size/1.5f));
vertex[3].m_Position *= 4.0f;
vertex[3].m_Position.Y = m_WaterHeight + 1.0f;
vertex[3].m_UV[1] = 0;
vertex[3].m_UV[0] = 0;
vertex[2].m_Position = CVector3D(pos.X - perp.X*(size/2.2f) + avgnorm[0]*(size/1.5f), 0.0f,pos.Y - perp.Y*(size/2.2f) + avgnorm[2]*(size/1.5f));
vertex[2].m_Position *= 4.0f;
vertex[2].m_Position.Y = m_WaterHeight + 1.0f;
vertex[2].m_UV[1] = 0;
vertex[2].m_UV[0] = 1;
waves_indices.push_back(waves_vertex_data.size());
waves_vertex_data.push_back(vertex[0]);
waves_indices.push_back(waves_vertex_data.size());
waves_vertex_data.push_back(vertex[1]);
waves_indices.push_back(waves_vertex_data.size());
waves_vertex_data.push_back(vertex[2]);
waves_indices.push_back(waves_vertex_data.size());
waves_vertex_data.push_back(vertex[3]);
}
// no vertex buffers if no data generated
if (waves_indices.empty())
return;
// waves
// allocate vertex buffer
m_VBWaves = g_VBMan.Allocate(sizeof(SWavesVertex), waves_vertex_data.size(), GL_STATIC_DRAW, GL_ARRAY_BUFFER);
m_VBWaves->m_Owner->UpdateChunkVertices(m_VBWaves, &waves_vertex_data[0]);
// Construct indices buffer
m_VBWavesIndices = g_VBMan.Allocate(sizeof(GLushort), waves_indices.size(), GL_STATIC_DRAW, GL_ELEMENT_ARRAY_BUFFER);
m_VBWavesIndices->m_Owner->UpdateChunkVertices(m_VBWavesIndices, &waves_indices[0]);
}