// add full fill and subtract them from normal fill polys
void Layer::addFullPolygons(const vector<Poly> &newpolys, bool decor)
{
if (newpolys.size()==0) return;
Clipping clipp;
clipp.clear();
// full fill only where already normal fill
clipp.addPolys(fillPolygons,subject);
if (decor) clipp.addPolys(fullFillPolygons,subject);
clipp.addPolys(newpolys,clip);
clipp.setZ(Z);
vector<Poly> inter = clipp.intersect();
vector<Poly> normals = clipp.subtractMerged(thickness/2.);
if (decor) {// && LayerNo != 0) // no decor on base layers
decorPolygons.insert(decorPolygons.end(), inter.begin(), inter.end());
Clipping clipp;
clipp.addPolys(fullFillPolygons,subject);
clipp.addPolys(inter,clip);
clipp.setZ(Z);
setFullFillPolygons(clipp.subtract());
}
else {
fullFillPolygons.insert(fullFillPolygons.end(),inter.begin(),inter.end());
}
setNormalFillPolygons(normals);
// mergeFullPolygons(false); // done separately
}
void Model::MakeSupportPolygons(Layer * layer, // lower -> will change
const Layer * layerabove, // upper
double widen)
{
const double distance =
settings.GetExtrudedMaterialWidth(layer->thickness);
// vector<Poly> tosupport = Clipping::getOffset(layerabove->GetToSupportPolygons(),
// distance/2.);
//vector<Poly> tosupport = Clipping::getMerged(layerabove->GetToSupportPolygons(),
// distance);
vector<Poly> tosupport = layerabove->GetToSupportPolygons();
Clipping clipp;
clipp.addPolys(layerabove->GetSupportPolygons(), subject);
clipp.addPolys(tosupport, subject);
clipp.addPolys(layer->GetPolygons(), clip);
clipp.setZ(layer->getZ());
vector<Poly> spolys = clipp.subtract(CL::pftNonZero,CL::pftEvenOdd);
if (widen != 0) // widen from layer to layer
spolys = clipp.getOffset(spolys, widen * layer->thickness);
spolys = clipp.getMerged(spolys,distance);
layer->setSupportPolygons(spolys);
}
vector<Poly> Clipping::getPolys(const ExPoly &expoly)
{
Clipping clipp;
clipp.addPoly(expoly.outer, subject);
clipp.addPolys(expoly.holes, clip);
vector<Poly> polys = clipp.subtract();
return polys;
}
vector<Poly> Layer::getOverhangs() const
{
vector<Poly> overhangs;
if (previous!=NULL) {
Clipping clipp;
clipp.addPolys(polygons, subject);
vector<Poly> prevoffset = Clipping::getOffset(previous->polygons, thickness/2);
clipp.addPolys(prevoffset, clip);
clipp.setZ(Z);
overhangs = clipp.subtract();//CL::pftNonZero,CL::pftNonZero);
}
return overhangs;
}
// add bridge polys and subtract them from normal and full fill polys
// each given ExPoly is a single bridge with its holes
void Layer::addBridgePolygons(const vector<ExPoly> &newexpolys)
{
// clip against normal fill and make these areas into bridges:
Clipping clipp;
uint num_bridges = newexpolys.size();
if (num_bridges==0) return;
clipp.clear();
bridgePolygons.clear();
for (uint i=0; i < num_bridges; i++){
vector<Poly> newpolys = Clipping::getPolys(newexpolys[i]);
clipp.clear();
clipp.addPolys(fillPolygons,subject);
clipp.addPolys(newpolys, clip);
vector<ExPoly> exbridges = clipp.ext_intersect();
bridgePolygons.insert(bridgePolygons.end(),exbridges.begin(),exbridges.end());
}
// subtract from normal fill
clipp.clear();
clipp.addPolys(fillPolygons,subject);
clipp.addPolys(newexpolys, clip);
setNormalFillPolygons(clipp.subtract());
}
void Layer::FindThinpolys(const vector<Poly> &polys, double extrwidth,
vector<Poly> &thickpolys, vector<Poly> &thinpolys)
{
#define THINPOLYS 1
#if THINPOLYS
// go in
thickpolys = Clipping::getOffset(polys, -0.5*extrwidth);
// go out again, now thin polys are gone
thickpolys = Clipping::getOffset(thickpolys, 0.55*extrwidth);
// (need overlap to really clip)
// use bigger (longer) polys for clip to avoid overlap of thin and thick extrusion lines
vector <Poly> bigthick = Clipping::getOffset(thickpolys, extrwidth);
// difference to original are thin polys
Clipping clipp;
clipp.addPolys(polys, subject);
clipp.addPolys(bigthick, clip);
thinpolys = clipp.subtract();
// remove overlap
thickpolys = Clipping::getOffset(thickpolys, -0.05*extrwidth);
#else
thickpolys = polys;
#endif
}
void Layer::CalcInfill (const Settings &settings)
{
// inFill distances in real mm:
// for full polys/layers:
double fullInfillDistance=0;
double infillDistance=0; // normal fill
double altInfillDistance=0;
double altInfillPercent=settings.get_double("Slicing","InfillPercent");
double normalInfilldist=0;
bool shellOnly = !settings.get_boolean("Slicing","DoInfill");
fullInfillDistance = settings.GetInfillDistance(thickness, 100);
if (settings.get_double("Slicing","InfillPercent") == 0)
shellOnly = true;
else
infillDistance = settings.GetInfillDistance(thickness,altInfillPercent);
int altinfill = settings.get_integer("Slicing","AltInfillLayers");
normalInfilldist = infillDistance;
if ( altinfill != 0 && LayerNo % altinfill == 0 && altInfillPercent != 0) {
altInfillDistance = settings.GetInfillDistance(thickness,
settings.get_double("Slicing","AltInfillPercent"));
normalInfilldist = altInfillDistance;
}
// first layers:
if (LayerNo < (int)settings.get_integer("Slicing","FirstLayersNum")) {
double first_infdist =
fullInfillDistance * (1.+settings.get_double("Slicing","FirstLayersInfillDist"));
normalInfilldist = max(normalInfilldist, first_infdist);
fullInfillDistance = max(fullInfillDistance, first_infdist);
}
// relative extrusion for skins:
double skinfillextrf = settings.get_double("Slicing","FullFillExtrusion")/skins/skins;
normalInfill = new Infill(this,settings.get_double("Slicing","NormalFillExtrusion"));
normalInfill->setName("normal");
fullInfill = new Infill(this,settings.get_double("Slicing","FullFillExtrusion"));
fullInfill->setName("full");
skirtInfill = new Infill(this,settings.get_double("Slicing","FullFillExtrusion"));
skirtInfill->setName("skirt");
skinFullInfills.clear();
supportInfill = new Infill(this,settings.get_double("Slicing","SupportExtrusion"));
supportInfill->setName("support");
decorInfill = new Infill(this,1.);
decorInfill->setName("decor");
thinInfill = new Infill(this, 1.);
thinInfill->setName("thin");
double rot = (settings.get_double("Slicing","InfillRotation"),
+ (double)LayerNo*settings.get_double("Slicing","InfillRotationPrLayer"))/180.0*M_PI;
if (!shellOnly)
normalInfill->addPolys(Z, fillPolygons, (InfillType)settings.get_integer("Slicing","NormalFilltype"),
normalInfilldist, fullInfillDistance, rot);
if (settings.get_boolean("Slicing","FillSkirt")) {
vector<Poly> skirtFill;
Clipping clipp;
clipp.addPolys(skirtPolygons, subject);
clipp.addPolys(*GetOuterShell(), clip);
clipp.addPolys(supportPolygons, clip);
skirtFill = clipp.subtract();
skirtFill = Clipping::getOffset(skirtFill, -fullInfillDistance);
skirtInfill->addPolys(Z, skirtFill, (InfillType)settings.get_integer("Slicing","FullFilltype"),
fullInfillDistance, fullInfillDistance, rot);
}
fullInfill->addPolys(Z, fullFillPolygons, (InfillType)settings.get_integer("Slicing","FullFilltype"),
fullInfillDistance, fullInfillDistance, rot);
decorInfill->addPolys(Z, decorPolygons, (InfillType)settings.get_integer("Slicing","DecorFilltype"),
settings.get_double("Slicing","DecorInfillDistance"),
settings.get_double("Slicing","DecorInfillDistance"),
settings.get_double("Slicing","DecorInfillRotation")/180.0*M_PI);
assert(bridge_angles.size() >= bridgePolygons.size());
bridgeInfills.resize(bridgePolygons.size());
for (uint b=0; b < bridgePolygons.size(); b++){
bridgeInfills[b] = new Infill(this, settings.get_double("Slicing","BridgeExtrusion"));
bridgeInfills[b]->addPoly(Z, bridgePolygons[b], BridgeInfill,
fullInfillDistance, fullInfillDistance,
bridge_angles[b]+M_PI/2);
}
if (skins>1) {
double skindistance = fullInfillDistance/skins;
for (uint s = 0; s<skins; s++){
double drot = rot + settings.get_double("Slicing","InfillRotationPrLayer")/180.0*M_PI*s;
double sz = Z-thickness + (s+1)*thickness/skins;
Infill *inf = new Infill(this, skinfillextrf);
inf->setName("skin");
inf->addPolys(sz, skinFullFillPolygons, (InfillType)settings.get_integer("Slicing","FullFilltype"),
skindistance, skindistance, drot);
skinFullInfills.push_back(inf);
}
}
supportInfill->addPolys(Z, supportPolygons,
(InfillType)settings.get_integer("Slicing","SupportFilltype"),
settings.get_double("Slicing","SupportInfillDistance"),
settings.get_double("Slicing","SupportInfillDistance"), 0);
thinInfill->addPolys(Z, thinPolygons, ThinInfill,
fullInfillDistance, fullInfillDistance, 0);
}