void DirectxEngine::InitialiseDebugging()
{
#ifdef _DEBUG
if(SUCCEEDED(m_data->device->QueryInterface(__uuidof(ID3D11Debug), (void**)&m_data->debug)))
{
ID3D11InfoQueue* infoQueue = nullptr;
if(SUCCEEDED(m_data->debug->QueryInterface(__uuidof(ID3D11InfoQueue), (void**)&infoQueue)))
{
D3D11_MESSAGE_ID knownMessages[] =
{
D3D11_MESSAGE_ID_SETPRIVATEDATA_CHANGINGPARAMS,
};
D3D11_INFO_QUEUE_FILTER filter;
memset( &filter, 0, sizeof(filter) );
filter.DenyList.NumIDs = _countof(knownMessages);
filter.DenyList.pIDList = knownMessages;
infoQueue->AddStorageFilterEntries(&filter);
infoQueue->SetBreakOnSeverity(D3D11_MESSAGE_SEVERITY_CORRUPTION, true);
infoQueue->SetBreakOnSeverity(D3D11_MESSAGE_SEVERITY_ERROR, true);
infoQueue->Release();
}
}
#endif
}
HRESULT Create(HWND wnd)
{
hWnd = wnd;
HRESULT hr;
RECT client;
GetClientRect(hWnd, &client);
xres = client.right - client.left;
yres = client.bottom - client.top;
hr = LoadDXGI();
if (SUCCEEDED(hr)) hr = LoadD3D();
if (SUCCEEDED(hr)) hr = LoadD3DCompiler();
if (FAILED(hr))
{
UnloadDXGI();
UnloadD3D();
UnloadD3DCompiler();
return hr;
}
IDXGIFactory* factory;
IDXGIAdapter* adapter;
IDXGIOutput* output;
hr = PCreateDXGIFactory(__uuidof(IDXGIFactory), (void**)&factory);
if (FAILED(hr)) MessageBox(wnd, _T("Failed to create IDXGIFactory object"), _T("Dolphin Direct3D 11 backend"), MB_OK | MB_ICONERROR);
hr = factory->EnumAdapters(g_ActiveConfig.iAdapter, &adapter);
if (FAILED(hr))
{
// try using the first one
hr = factory->EnumAdapters(0, &adapter);
if (FAILED(hr)) MessageBox(wnd, _T("Failed to enumerate adapters"), _T("Dolphin Direct3D 11 backend"), MB_OK | MB_ICONERROR);
}
// TODO: Make this configurable
hr = adapter->EnumOutputs(0, &output);
if (FAILED(hr))
{
// try using the first one
IDXGIAdapter* firstadapter;
hr = factory->EnumAdapters(0, &firstadapter);
if (!FAILED(hr))
hr = firstadapter->EnumOutputs(0, &output);
if (FAILED(hr)) MessageBox(wnd,
_T("Failed to enumerate outputs!\n")
_T("This usually happens when you've set your video adapter to the Nvidia GPU in an Optimus-equipped system.\n")
_T("Set Dolphin to use the high-performance graphics in Nvidia's drivers instead and leave Dolphin's video adapter set to the Intel GPU."),
_T("Dolphin Direct3D 11 backend"), MB_OK | MB_ICONERROR);
SAFE_RELEASE(firstadapter);
}
// get supported AA modes
aa_modes = EnumAAModes(adapter);
if (g_Config.iMultisampleMode >= (int)aa_modes.size())
{
g_Config.iMultisampleMode = 0;
UpdateActiveConfig();
}
DXGI_SWAP_CHAIN_DESC swap_chain_desc = {};
swap_chain_desc.BufferCount = 1;
swap_chain_desc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
swap_chain_desc.OutputWindow = wnd;
swap_chain_desc.SampleDesc.Count = 1;
swap_chain_desc.SampleDesc.Quality = 0;
swap_chain_desc.Windowed = !g_Config.bFullscreen;
DXGI_OUTPUT_DESC out_desc = {};
output->GetDesc(&out_desc);
DXGI_MODE_DESC mode_desc = {};
mode_desc.Width = out_desc.DesktopCoordinates.right - out_desc.DesktopCoordinates.left;
mode_desc.Height = out_desc.DesktopCoordinates.bottom - out_desc.DesktopCoordinates.top;
mode_desc.Format = DXGI_FORMAT_R8G8B8A8_UNORM;
mode_desc.Scaling = DXGI_MODE_SCALING_UNSPECIFIED;
hr = output->FindClosestMatchingMode(&mode_desc, &swap_chain_desc.BufferDesc, nullptr);
if (FAILED(hr)) MessageBox(wnd, _T("Failed to find a supported video mode"), _T("Dolphin Direct3D 11 backend"), MB_OK | MB_ICONERROR);
if (swap_chain_desc.Windowed)
{
// forcing buffer resolution to xres and yres..
// this is not a problem as long as we're in windowed mode
swap_chain_desc.BufferDesc.Width = xres;
swap_chain_desc.BufferDesc.Height = yres;
}
#if defined(_DEBUG) || defined(DEBUGFAST)
// Creating debug devices can sometimes fail if the user doesn't have the correct
// version of the DirectX SDK. If it does, simply fallback to a non-debug device.
{
hr = PD3D11CreateDeviceAndSwapChain(adapter, D3D_DRIVER_TYPE_UNKNOWN, nullptr,
D3D11_CREATE_DEVICE_SINGLETHREADED | D3D11_CREATE_DEVICE_DEBUG,
supported_feature_levels, NUM_SUPPORTED_FEATURE_LEVELS,
D3D11_SDK_VERSION, &swap_chain_desc, &swapchain, &device,
&featlevel, &context);
// Debugbreak on D3D error
if (SUCCEEDED(hr) && SUCCEEDED(device->QueryInterface(__uuidof(ID3D11Debug), (void**)&debug)))
{
ID3D11InfoQueue* infoQueue = nullptr;
if (SUCCEEDED(debug->QueryInterface(__uuidof(ID3D11InfoQueue), (void**)&infoQueue)))
{
infoQueue->SetBreakOnSeverity(D3D11_MESSAGE_SEVERITY_CORRUPTION, true);
infoQueue->SetBreakOnSeverity(D3D11_MESSAGE_SEVERITY_ERROR, true);
D3D11_MESSAGE_ID hide[] =
{
D3D11_MESSAGE_ID_SETPRIVATEDATA_CHANGINGPARAMS
};
D3D11_INFO_QUEUE_FILTER filter = {};
filter.DenyList.NumIDs = sizeof(hide) / sizeof(D3D11_MESSAGE_ID);
filter.DenyList.pIDList = hide;
infoQueue->AddStorageFilterEntries(&filter);
infoQueue->Release();
}
}
}
if (FAILED(hr))
#endif
{
hr = PD3D11CreateDeviceAndSwapChain(adapter, D3D_DRIVER_TYPE_UNKNOWN, nullptr,
D3D11_CREATE_DEVICE_SINGLETHREADED,
supported_feature_levels, NUM_SUPPORTED_FEATURE_LEVELS,
D3D11_SDK_VERSION, &swap_chain_desc, &swapchain, &device,
&featlevel, &context);
}
if (FAILED(hr))
{
MessageBox(wnd, _T("Failed to initialize Direct3D.\nMake sure your video card supports at least D3D 10.0"), _T("Dolphin Direct3D 11 backend"), MB_OK | MB_ICONERROR);
SAFE_RELEASE(device);
SAFE_RELEASE(context);
SAFE_RELEASE(swapchain);
return E_FAIL;
}
// prevent DXGI from responding to Alt+Enter, unfortunately DXGI_MWA_NO_ALT_ENTER
// does not work so we disable all monitoring of window messages. However this
// may make it more difficult for DXGI to handle display mode changes.
hr = factory->MakeWindowAssociation(wnd, DXGI_MWA_NO_WINDOW_CHANGES);
if (FAILED(hr)) MessageBox(wnd, _T("Failed to associate the window"), _T("Dolphin Direct3D 11 backend"), MB_OK | MB_ICONERROR);
SetDebugObjectName((ID3D11DeviceChild*)context, "device context");
SAFE_RELEASE(factory);
SAFE_RELEASE(output);
SAFE_RELEASE(adapter);
ID3D11Texture2D* buf;
hr = swapchain->GetBuffer(0, IID_ID3D11Texture2D, (void**)&buf);
if (FAILED(hr))
{
MessageBox(wnd, _T("Failed to get swapchain buffer"), _T("Dolphin Direct3D 11 backend"), MB_OK | MB_ICONERROR);
SAFE_RELEASE(device);
SAFE_RELEASE(context);
SAFE_RELEASE(swapchain);
return E_FAIL;
}
backbuf = new D3DTexture2D(buf, D3D11_BIND_RENDER_TARGET);
SAFE_RELEASE(buf);
CHECK(backbuf!=nullptr, "Create back buffer texture");
SetDebugObjectName((ID3D11DeviceChild*)backbuf->GetTex(), "backbuffer texture");
SetDebugObjectName((ID3D11DeviceChild*)backbuf->GetRTV(), "backbuffer render target view");
context->OMSetRenderTargets(1, &backbuf->GetRTV(), nullptr);
// BGRA textures are easier to deal with in TextureCache, but might not be supported by the hardware
UINT format_support;
device->CheckFormatSupport(DXGI_FORMAT_B8G8R8A8_UNORM, &format_support);
bgra_textures_supported = (format_support & D3D11_FORMAT_SUPPORT_TEXTURE2D) != 0;
stateman = new StateManager;
return S_OK;
}
HRESULT Create(HWND wnd)
{
HRESULT hr = LoadDXGI();
if (SUCCEEDED(hr))
hr = LoadD3D();
if (SUCCEEDED(hr))
hr = LoadD3DCompiler();
if (FAILED(hr))
{
UnloadDXGI();
UnloadD3D();
UnloadD3DCompiler();
return hr;
}
hr = PCreateDXGIFactory(__uuidof(IDXGIFactory2), (void**)&s_dxgi_factory);
if (FAILED(hr))
MessageBox(wnd, _T("Failed to create IDXGIFactory object"), _T("Dolphin Direct3D 11 backend"),
MB_OK | MB_ICONERROR);
IDXGIAdapter* adapter;
hr = s_dxgi_factory->EnumAdapters(g_ActiveConfig.iAdapter, &adapter);
if (FAILED(hr))
{
// try using the first one
hr = s_dxgi_factory->EnumAdapters(0, &adapter);
if (FAILED(hr))
MessageBox(wnd, _T("Failed to enumerate adapters"), _T("Dolphin Direct3D 11 backend"),
MB_OK | MB_ICONERROR);
}
// get supported AA modes
s_aa_modes = EnumAAModes(adapter);
if (std::find_if(s_aa_modes.begin(), s_aa_modes.end(), [](const DXGI_SAMPLE_DESC& desc) {
return desc.Count == g_Config.iMultisamples;
}) == s_aa_modes.end())
{
Config::SetCurrent(Config::GFX_MSAA, UINT32_C(1));
UpdateActiveConfig();
}
// Check support for allow tearing, we query the interface for backwards compatibility
UINT allow_tearing = FALSE;
IDXGIFactory5* factory5;
hr = s_dxgi_factory->QueryInterface(&factory5);
if (SUCCEEDED(hr))
{
hr = factory5->CheckFeatureSupport(DXGI_FEATURE_PRESENT_ALLOW_TEARING, &allow_tearing,
sizeof(allow_tearing));
factory5->Release();
}
s_allow_tearing_supported = SUCCEEDED(hr) && allow_tearing;
// Creating debug devices can sometimes fail if the user doesn't have the correct
// version of the DirectX SDK. If it does, simply fallback to a non-debug device.
if (g_Config.bEnableValidationLayer)
{
hr = s_d3d11_create_device(adapter, D3D_DRIVER_TYPE_UNKNOWN, nullptr, D3D11_CREATE_DEVICE_DEBUG,
supported_feature_levels, NUM_SUPPORTED_FEATURE_LEVELS,
D3D11_SDK_VERSION, &device, &s_featlevel, &context);
// Debugbreak on D3D error
if (SUCCEEDED(hr) && SUCCEEDED(device->QueryInterface(__uuidof(ID3D11Debug), (void**)&s_debug)))
{
ID3D11InfoQueue* infoQueue = nullptr;
if (SUCCEEDED(s_debug->QueryInterface(__uuidof(ID3D11InfoQueue), (void**)&infoQueue)))
{
infoQueue->SetBreakOnSeverity(D3D11_MESSAGE_SEVERITY_CORRUPTION, true);
infoQueue->SetBreakOnSeverity(D3D11_MESSAGE_SEVERITY_ERROR, true);
D3D11_MESSAGE_ID hide[] = {D3D11_MESSAGE_ID_SETPRIVATEDATA_CHANGINGPARAMS};
D3D11_INFO_QUEUE_FILTER filter = {};
filter.DenyList.NumIDs = sizeof(hide) / sizeof(D3D11_MESSAGE_ID);
filter.DenyList.pIDList = hide;
infoQueue->AddStorageFilterEntries(&filter);
infoQueue->Release();
}
}
}
if (!g_Config.bEnableValidationLayer || FAILED(hr))
{
hr = s_d3d11_create_device(adapter, D3D_DRIVER_TYPE_UNKNOWN, nullptr, 0,
supported_feature_levels, NUM_SUPPORTED_FEATURE_LEVELS,
D3D11_SDK_VERSION, &device, &s_featlevel, &context);
}
SAFE_RELEASE(adapter);
if (FAILED(hr) || (wnd && !CreateSwapChain(wnd)))
{
MessageBox(
wnd,
_T("Failed to initialize Direct3D.\nMake sure your video card supports at least D3D 10.0"),
_T("Dolphin Direct3D 11 backend"), MB_OK | MB_ICONERROR);
SAFE_RELEASE(device);
SAFE_RELEASE(context);
SAFE_RELEASE(s_dxgi_factory);
return E_FAIL;
}
hr = device->QueryInterface<ID3D11Device1>(&device1);
if (FAILED(hr))
{
WARN_LOG(VIDEO, "Missing Direct3D 11.1 support. Logical operations will not be supported.");
g_Config.backend_info.bSupportsLogicOp = false;
}
// BGRA textures are easier to deal with in TextureCache, but might not be supported
UINT format_support;
device->CheckFormatSupport(DXGI_FORMAT_B8G8R8A8_UNORM, &format_support);
s_bgra_textures_supported = (format_support & D3D11_FORMAT_SUPPORT_TEXTURE2D) != 0;
g_Config.backend_info.bSupportsST3CTextures = SupportsS3TCTextures(device);
g_Config.backend_info.bSupportsBPTCTextures = SupportsBPTCTextures(device);
// prevent DXGI from responding to Alt+Enter, unfortunately DXGI_MWA_NO_ALT_ENTER
// does not work so we disable all monitoring of window messages. However this
// may make it more difficult for DXGI to handle display mode changes.
if (wnd)
{
hr = s_dxgi_factory->MakeWindowAssociation(wnd, DXGI_MWA_NO_WINDOW_CHANGES);
if (FAILED(hr))
MessageBox(wnd, _T("Failed to associate the window"), _T("Dolphin Direct3D 11 backend"),
MB_OK | MB_ICONERROR);
}
SetDebugObjectName(context, "device context");
stateman = new StateManager;
return S_OK;
}