LiquidFiles Unix Command Line Utility

Introduction

liquidfiles_unix is UNIX command line utility, to work with Liquidfiles server, for sending files, listing messages, downloading files, etc.

LiquidFiles Unix command line utility extends the functionality of your LiquidFiles server to command line use and scripting from supported Unix and Linux servers.

Liquidfiles Unix is fully based on Liquidfiles public API and user libcurl to send and receive data from Liquidfiles server.

This document consists of the following sections:

Installation - describes the typical installation steps including dependent libraries.
Usage of tool - contains full description of commands, their arguments as well as usage examples.

Installation

LiquidFiles can be installed statically or to use shared libraries where all system dependencies are met. LiquidFiles relies heavily on OpenSSL and Curl dependencies, so you will need to ensure all system dependencies are installed. It is recommended to use the latest supported versions of both OpenSSL and Curl.

Both installation options work in the same way and provide the same supported functionality, while the static executable can be copied to another identical machine and executed there, offering portability for larger or more controlled environments. Shared installations operate on the installed system only.

These instructions use the following keys for substituting user defined values:

<xxx-VERSION> (downloaded_version_filename)
$PATH_X (user_defined_path).

Installing shared

Shared build will need to be performed on each system you wish to run Liquidfiles command line utility from. The following instructions assume you will use default installation paths.

Installing dependencies

If you already have OpenSSL or Curl libraries installed, you may skip some of the below steps. If your system has OpenSSL or Curl installed in the default paths, you will not require the prefix option that allows user specified path for installation.

Install OpenSSL first:

Download latest OpenSSL version from official site.
Extract archive (e.g. tar –xz <openssl-VERSION>.tar.gz)
Go to directory (e.g. cd <openssl-VERSION>)
run Configure './config shared'
in the directory run 'make'
then run 'make install'

After installing OpenSSL, you need to install Curl:

Download latest curl version from official site.
Extract archive (e.g. tar –xz <curl-VERSION>.tar.gz)
Go to directory (e.g. cd <curl-VERSION>)
run Configure** './configure'
in the directory run 'make'
then run 'make install'

Note - if your OpenSSL is installed in a non-system path, then you need to specify --with-ssl=$PATH_SSL option.
Refer to OpenSSL installation instructions and options for further information.

Installing liquidfiles command line utility

Download LiquidFiles [Source Code] (github_link_here) and unpack the files, then enter the directory
Run Configure* './configure'
Make make
Install make install

Note - if your OpenSSL and Curl is installed in non-system path, then you need to specify using the install options --with-curl=$PATH_CURL and/or --with-ssl=$PATH_SSL

Installing static

The benefit of building statically is that you do not necessarily have to install OpenSSL and Curl into default system path for use by other applications or when you have a different version installed on your build system. The static installation creates a single, executable file that can be used on any other identical environment to the build system without the need to install the system dependencies at all.

Static build is similar to shared in that the compiling of OpenSSL and Curl that are heavily depended on, so you need to have dependent libraries to be installed statically and using the --enable-static configure option to build LiquidFiles statically.

This method also requires in some instances that a shared installation of OpenSSL is also present on the build system. It is highly recommended to use an external path (e.g. /home/Static) for BOTH OpenSSL and Curl static installations. Then specify this single path for building the LiquidFiles package into a directory of your preference. The instructions assume this is the case to provide a reliable installation option.

Installing dependencies

To install OpenSSL

Download latest OpenSSL version from official site.
Extract archive (e.g. tar –xz <openssl-VERSION>.tar.gz)
Go to directory (e.g. cd <openssl-VERSION>)
Configure shared libs (e.g. ./config shared --prefix=$PATH_X)
in the directory run 'make'
then run 'make install'
then run 'make clean'
Configure static libs (./config no-shared --prefix=$PATH_X)
in the directory run 'make'
then run 'make install'

NOTE - For some cases, Curl static build is also not passed with only static OpenSSL. In these cases you need to build OpenSSL both statically and shared, in some instances you may be able to skip step 7-10 above, if in doubt do both.

After having OpenSSL, you need to install curl

Download latest curl version from official site.
Extract archive (e.g. tar –xz <curl-VERSION>.tar.gz)
Go to directory (cd <curl-VERSION>)
Configure static files (e.g. ./configure --with-static --prefix=$PATH_X --with-ssl=$PATH_X --disable-shared)
in the directory run 'make'
then run 'make install'

Note - Using these instructions, you will need the external path however if your OpenSSL is on system default paths, then you may not need to specify --with-ssl option, or if you have specified custom path you need to substitute.

Installing liquidfiles

Download LiquidFiles Unix CLI Source
Configure static LiquidFiles** (e.g. ./configure --with-curl=$EXT_PATH --prefix=$LF_EXT_PATH --enable-static)
in the directory run 'make'
then run 'make install'

Note - Using these instructions, you will need the external path however if your Curl is on system default paths, then you don’t need to specify --with-curl option.

Usage

Liquidfiles is command line utility. It invokes one command per session and exits. General usage is the following:

liquidfiles <command> <command_args>

The list of supported commands is:

attach Uploads given files to server.
attach_chunk Uploads given chunk of file to server.
delete_attachments Deletes the given attachments.
delete_filelink Deletes the given filelink.
download Download given files.
file_request Sends the file request to specified user.
filedrop Sends the file(s) by filedrop.
filelink Uploads given file and creates filelink on it.
filelinks Lists the available filelinks.
get_api_key Retrieves api key for the specified user.
messages Lists the available messages.
send Sends the file(s) to specified user.

To get command's detailed description, options and usage 'help' command can be used:

liquidfiles help <command>

Below subsections contain detailed descriptions of commands

attach

Description:

Uploads the given file(s) to the liquidfiles server and returns the id(s) of uploaded file(s).

Usage:

liquidfiles attach [--server=<url>] [--api_key=<key>] [-k] [-s] [--report_level=<level>] <file> ...

Arguments:

--server
    The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

<file> ...
    File path(s) to upload.

attach_chunk

Description:

Uploads given chunk of file to server.

Usage:

liquidfiles attach_chunk [--server=<url>] [--api_key=<key>] [-k] [-s] [--report_level=<level>] --chunk=<int> --chunks=<int> --filename=<string> <file>

Arguments:

--server
    The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--chunk
    ID of current chunk.

--chunks
    Whole count of chunks.

--filename
    Name of target file.

<file>
    File chunk path to upload.

delete_attachments

Description:

Deletes the given attachments.

Usage:

liquidfiles delete_attachments [--server=<url>] [--api_key=<key>] [-k] [-s] [--report_level=<level>] [--message_id=<id>] [<id> ...]

Arguments:

--server
    The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--message_id
    Message id to delete attachments of it.

<id> ...
    Id(s) of attachments to delete.

delete_filelink

Description:

Deletes the given filelink.

Usage:

liquidfiles delete_filelink [--server=<url>] [--api_key=<key>] [-k] [-s] [--report_level=<level>] --filelink_id=<id>

Arguments:

--server
    The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--filelink_id
    ID of filelink to delete.

download

Description:

Downloads given files.
This command gives 2 ways to download files from liquidfiles.
First way to by specifying direct url to file(s) by unnamed arguments. In this case command downloads the specified files from the url.
Second way is by specifying message(s) by '--message_id' argument or by '--sent_in_the_last' or '--sent_after'. In this case command retrieves the message(s) and downloads all the files attached to it.

Usage:

liquidfiles download [--server=<url>] [--api_key=<key>] [-k] [-s] [--report_level=<level>] [--download_to=<path>] [--message_id=<id>] [--sent_in_the_last=<HOURS>] [--sent_after=YYYYMMDD] [<url> ...]

Arguments:

--server
    The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--download_to
    Directory path to download files there.
    Default value: "".

--message_id
    Message id to download attachments of it.

--sent_in_the_last
    Download files sent in the last specified hours.

--sent_after
    Download files sent after specified date.

<url> ...
    Url(s) of files to download.

file_request

Description:

Sends the file request to specified user.

Usage:

liquidfiles file_request [--server=<url>] [--api_key=<key>] [-k] [-s] [--report_level=<level>] --to=<username> [--subject=<string>] [--message=<string>]

Arguments:

--server
    The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--to
    User name or email, to send file request.

--subject
    Subject of composed email.
    Default value: "".

--message
    Message text of composed email.
    Default value: "".

filedrop

Description:

Sends the file(s) by filedrop.

Usage:

liquidfiles filedrop --server=<url> [-k] [--report_level=<level>] --from=<username> [--subject=<string>] [--message=<string>] [-r] <file> ...

Arguments:

--server
    The server URL.

-k
    If specified, do not validate server certificate.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--from
    User who sends the files

--subject
    Subject of composed email.
    Default value: "".

--message
    Message text of composed email.
    Default value: "".

-r
    If specified, it means that unnamed arguments are attachment IDs, otherwise they are file paths.

<file> ...
    File path(s) or attachments IDs to send to user.

filelink

Description:

Creates filelink.
This command creates filelink for the given files. It can upload given file and create link on it or get already uploaded file ID and create link on it.
If '-r' option is specified, it means that given unnamed argument is ID of already uploaded file, so command just creates link on it.
If '-r' is not specified, then given unnamed argument is file path, and command uploads that file and creates link on it.

Usage:

liquidfiles filelink [--server=<url>] [--api_key=<key>] [-k] [-s] [--report_level=<level>] [--expires=<YYYY-MM-DD>] [-r] <file>

Arguments:

--server
    The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--expires
    Expire date for the filelink.

-r
    If specified, it means that unnamed argument is attachment ID, otherwise it is file path.

<file>
    File path or attachment id to create filelink.

filelinks

Description:

Lists the available filelinks.
The output of this command is list of filelinks. The format of output depends on '--output_format' argument.
If '--output_format' is table, then table is printed. Each row of table represents one filelink.
If '--output_format' is csv, then output is csv format. All the filelinks are separated by comma.

Usage:

liquidfiles filelinks [--server=<url>] [--api_key=<key>] [-k] [-s] [--report_level=<level>] [--output_format=<format>] [--limit=<number>]

Arguments:

--server
    The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--output_format
    Specifies output string format.
    Valid values: table, csv.
    Default value: "table".

--limit
    Limit of filelinks list.

get_api_key

Description:

Retrieves api key for the specified user.

Usage:

liquidfiles get_api_key [-k] --server=<url> --username=<email> --password=<password> [-s] [--report_level=<level>]

Arguments:

-k
    If specified, do not validate server certificate.

--server
    The server URL.

--username
    Username.

--password
    Password.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and retrieved key.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

messages

Description: Lists the available messages. The output of this command is list of messages. The format of output depends on '--output_format' argument. If '--output_format' is table, then table is printed. Each row of table represents one message. If '--output_format' is csv, then output is csv format. All the messages are separated by comma.

Usage: liquidfiles messages [--server=] [--api_key=] [-k] [-s] [--report_level=] [--output_format=] [--message_id=] [--sent_in_the_last=] [--sent_after=YYYYMMDD]

Arguments: --server The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--output_format
    Specifies output string format.
    Valid values: table, csv.
    Default value: "table".

--message_id
    Message id to show.

--sent_in_the_last
    Show messages sent in the last specified hours.

--sent_after
    Show messages sent after specified date.

send

Description:

Sends the file(s) to specified user.
This command can upload given files and send them by message or get already uploaded file IDs and send them.
If '-r' option is specified, it means that given unnamed arguments are IDs of already uploaded files, so command just sends them
If '-r' is not specified, then given unnamed arguments are file paths, and command uploads that files and sends them.

Usage:

liquidfiles send [--server=<url>] [--api_key=<key>] [-k] [-s] [--report_level=<level>] --to=<username> [--subject=<string>] [--message=<string>] [-r] <file> ...

Arguments:

--server
    The server URL. If not specified, tries to retrieve from saved credentials.

--api_key
    API key of liquidfiles, to login to system. If not specified, tries to retrieve from saved credentials.

-k
    If specified, do not validate server certificate. If not specified, tries to retrieve from saved credentials.

-s
    If specified, saves current credentials in cache. Credentials to save are - '-k', '--server' and '--api_key'.

--report_level
    Level of reporting.
    Valid values: silent, normal, verbose.
    Default value: "normal".

--to
    User name or email, to send file.

--subject
    Subject of composed email.
    Default value: "".

--message
    Message text of composed email.
    Default value: "".

-r
    If specified, it means that unnamed arguments are attachment IDs, otherwise they are file paths.

<file> ...
    File path(s) or attachments IDs to send to user.

Name		Name	Last commit message	Last commit date
Latest commit History 99 Commits
src		src
test		test
.gitignore		.gitignore
LICENSE		LICENSE
Makefile.am		Makefile.am
Makefile.in		Makefile.in
README.md		README.md
aclocal.m4		aclocal.m4
compile		compile
configure		configure
configure.ac		configure.ac
depcomp		depcomp
install-sh		install-sh
missing		missing

License

GrantGatchel/liquidfiles_unix

Folders and files

Latest commit

History

Repository files navigation

LiquidFiles Unix Command Line Utility

Introduction

Installation

Installing shared

Installing dependencies

Installing liquidfiles command line utility

Installing static

Installing dependencies

Installing liquidfiles

Usage

attach

attach_chunk

delete_attachments

delete_filelink

download

file_request

filedrop

filelink

filelinks

get_api_key

messages

send

About

Resources

License

Stars

Watchers

Forks

Languages