Skip to content

loam SLAM with back and forth tilted scanning 2D laser, modified to work under ROS indigo and catkin

Notifications You must be signed in to change notification settings

daobilige-su/loam_back_and_forth

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

loam_back_and_forth

This is a LOAM (Lidar Odometry and Mapping) ROS package for back and forth tilting 2D laser scanner. This package is a simple modified copy of the original one release by Ji Zhang. The only change on top of the original one is to make it a Catkin package and work under ROS Indigo. Please cite their paper if this package is used.

Wiki Webpage by the Author: http://wiki.ros.org/loam_back_and_forth

J. Zhang and S. Singh. LOAM: Lidar Odometry and Mapping in Real-time. Robotics: Science and Systems Conference (RSS). Berkeley, CA, July 2014.(PDF)(VIDEO)

LOAM back and forth

how to use

Here I assume you have a Catkin worksapce under ~/ros_workspace/catkin_ws.

(1) gitclone the package into your "src" folder.

(2) compile the package

  • cd ~/ros_workspace/catkin_ws
  • catkin_make

(3) download a ROS bag file for test dataset.

(4) run the package and rosbag file

    1. in 1st terminal:
  • roslaunch loam_back_and_forth loam_back_and_forth.launch
    1. in 2nd terminal:
  • roscd loam_back_and_forth/data/
  • rosbay play nsh_staircase.bag or rosbay play nsh_undulating_motion.bag
  • (use -r 0.5 if the result look bad and it is due to the less powerful CPU, (e.g. rosbay play nsh_staircase.bag -r 0.5))

YOU SHOULD SEE A RESULT SIMILAR TO THEIR DEMO VIDEO (nsh_staircase DEMO VIDEO and nsh_undulating_motion DEMO VIDEO). GOOD LUCK.

Original Introduction by the author:

Lidar Odometry and Mapping (Loam) is a realtime method for state estimation and mapping using a 3D lidar, and optionally an IMU. The program contains four nodes. The “scanRegistration” node stacks laser scans within a sweep and publishes them as point cloud. The “laserOdometry” node estimates motion of the lidar between two sweeps, at a higher frame rate. The node corrects distortion in the point cloud from motion of the lidar. The “laserMapping” node takes the output of “laser_odometry” and incrementally builds a map. It also computes pose of the lidar on the map, at a lower frame rate. The state estimation of the lidar is combination of the outputs from “laserOdometry” and “laserMapping”, integrated in the “transformMaintenance” node.

The program is tested on ROS Fuerte, on a laptop computer with 2.5 GHz quad cores and 6 Gib memory (the program consumes two cores). This version uses a lidar that spins back and forth.

Wiki Webpage: http://wiki.ros.org/loam_back_and_forth

About

loam SLAM with back and forth tilted scanning 2D laser, modified to work under ROS indigo and catkin

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published