Skip to content

kib0rg/reaver-wps-fork-t6x

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

73 Commits
 
 
 
 
 
 
 
 

Repository files navigation

#Overview reaver-wps-fork-t6x is a modification done from a fork of reaver (https://code.google.com/p/reaver-wps-fork/) This modified version uses the Pixie Dust Attack to find the correct WPS PIN. This attack works against many Ralink, Broadcom, and Realtek APs The attack used in this version was developed by Wiire (https://github.com/wiire/pixiewps)

#Install Required Libraries and Tools

Libraries for reaver
	sudo apt-get install libpcap-dev aircrack-ng sqlite3 libsqlite3-dev

Tools
	You must install Pixiewps by Wiire (https://github.com/wiire/pixiewps)

#Compile and Install

Build Reaver

	cd /reaver-wps-fork-t6x-master/src
	chmod 777 ./configure
	./configure
	make

Install Reaver

	sudo make install

#Reaver Usage

Reaver v1.5.2 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <cheffner@tacnetsol.com>
mod by t6_x <t6_x@hotmail.com> & DataHead & Soxrok2212 & Wiire

Required Arguments:
		-i, --interface=<wlan>          Name of the monitor-mode interface to use
		-b, --bssid=<mac>               BSSID of the target AP

Optional Arguments:
		-m, --mac=<mac>                 MAC of the host system
		-e, --essid=<ssid>              ESSID of the target AP
		-c, --channel=<channel>         Set the 802.11 channel for the interface (implies -f)
		-o, --out-file=<file>           Send output to a log file [stdout]
		-s, --session=<file>            Restore a previous session file
		-C, --exec=<command>            Execute the supplied command upon successful pin recovery
		-D, --daemonize                 Daemonize reaver
		-a, --auto                      Auto detect the best advanced options for the target AP
		-f, --fixed                     Disable channel hopping
		-5, --5ghz                      Use 5GHz 802.11 channels
		-v, --verbose                   Display non-critical warnings (-vv for more)
		-q, --quiet                     Only display critical messages
		-K  --pixie-dust=<number>       [1] Run pixiewps with PKE, PKR, E-Hash1, E-Hash2, E-Nonce and Authkey (Ralink, Broadcom, Realtek)
		-Z, --no-auto-pass              Do NOT run reaver to auto retrieve WPA password if pixiewps attack is successful
		-h, --help                      Show help

Advanced Options:
		-p, --pin=<wps pin>             Use the specified 4 or 8 digit WPS pin
		-d, --delay=<seconds>           Set the delay between pin attempts [1]
		-l, --lock-delay=<seconds>      Set the time to wait if the AP locks WPS pin attempts [60]
		-g, --max-attempts=<num>        Quit after num pin attempts
		-x, --fail-wait=<seconds>       Set the time to sleep after 10 unexpected failures [0]
		-r, --recurring-delay=<x:y>     Sleep for y seconds every x pin attempts
		-t, --timeout=<seconds>         Set the receive timeout period [5]
		-T, --m57-timeout=<seconds>     Set the M5/M7 timeout period [0.20]
		-A, --no-associate              Do not associate with the AP (association must be done by another application)
		-N, --no-nacks                  Do not send NACK messages when out of order packets are received
		-S, --dh-small                  Use small DH keys to improve crack speed
		-L, --ignore-locks              Ignore locked state reported by the target AP
		-E, --eap-terminate             Terminate each WPS session with an EAP FAIL packet
		-n, --nack                      Target AP always sends a NACK [Auto]
		-w, --win7                      Mimic a Windows 7 registrar [False]
		-X, --exhaustive                Set exhaustive mode from the beginning of the session [False]
		-1, --p1-index                  Set initial array index for the first half of the pin [False]
		-2, --p2-index                  Set initial array index for the second half of the pin [False]
		-P, --pixiedust-loop            Set into PixieLoop mode (doesn't send M4, and loops through to M3) [False]
		-W, --generate-pin              Default Pin Generator by devttys0 team [1] Belkin [2] D-Link

Example:
		reaver -i mon0 -b 00:AA:BB:11:22:33 -vv -K 1

#Option (K)

The -K option 1 runs pixiewps with PKE, PKR, E-Hash1, E-Hash2, E-Nonce and the Authkey. pixiewps will try to attack Ralink, Broadcom and Realtek	
*Special note: if you are attacking a Realtek AP, do NOT use small DH Keys (-S)

#Option (P) in reaver Option (-P) in reaver puts reaver into a loop mode that does not do the WPS protocol to or past the M4 message to hopefully avoid lockouts. This is to ONLY be used for PixieHash collecting to use with pixiewps, NOT to 'online' bruteforce pins.

This option was made with intent of:

----Collecting repetitive hashes for further comparison and or analysis / discovery of new vulnerable chipsets , routers etc..

----Time sensistive attacks where the hash collecting continues repetitively until your time frame is met.

----For scripting purposes of whom want to use a possible lockout preventable way of PixieHash gathering for your Use case.

#Wash Usage

Wash v1.5.2 WiFi Protected Setup Scan Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner <cheffner@tacnetsol.com>
mod by t6_x <t6_x@hotmail.com> & DataHead & Soxrok2212 & Wiire

Required Arguments:
		-i, --interface=<iface>              Interface to capture packets on
		-f, --file [FILE1 FILE2 FILE3 ...]   Read packets from capture files

Optional Arguments:
		-c, --channel=<num>                  Channel to listen on [auto]
		-o, --out-file=<file>                Write data to file
		-n, --probes=<num>                   Maximum number of probes to send to each AP in scan mode [15]
		-D, --daemonize                      Daemonize wash
		-C, --ignore-fcs                     Ignore frame checksum errors
		-5, --5ghz                           Use 5GHz 802.11 channels
		-s, --scan                           Use scan mode
		-u, --survey                         Use survey mode [default]
		-P, --file-output-piped              Allows Wash output to be piped. Example. wash x|y|z...
		-g, --get-chipset                    Pipes output and runs reaver alongside to get chipset
		-h, --help                           Show help

Example:
		wash -i mon0

#Option (g) The option -g of wash, automatically runs the reaver to receive the chipset data. If the AP does not respond to them quickly, this option will be slow to display the data, because the reaver will stay running until getting the data or until you reach your timeout limit (30 secs)

#Contribution Modifications made by t6_x, DataHead, Soxrok2212

Some ideas made by nuroo, kcdtv

Bug fix made by alxchk, flatr0ze, USUARIONUEVO, ldm314

#Special Thanks Soxrok2212 for all work done to help in the development of tools Wiire for developing Pixiewps Craig Heffner for creating Reaver and for the creation of default pin generators (D-Link, Belkin) (http://www.devttys0.com/)

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 98.7%
  • Other 1.3%