by Andy Gock

For up to date documentation, please see the doxygen pages under the doxygen_pages directory.

A online version can also be seen at:

http://s.agock.com/glcd-documentation

However this site may not always be kept up to date.

Welcome to GLCD, an open source graphic LCD library written by Andy Gock.

Author's web site: http://agock.com/

GitHub repository: https://github.com/andygock/glcd

This library has been written cleanly, to allow easy modification for use with different microcontroller devices and controller chipsets. Logic relating to devices and controllers are palced in seperate files and specific implementations can be chosen by the use of special defined symbols.

It is suitable for monochrome (black and white) LCDs with page by page data and command write style data transfer protocol. It is not suitable for color graphic LCDs.

Works with:

• PCD8544 based LCDs, e.g Nokia 3110 and 5110 LCDs
• ST7565R / ST7565P serial interface
• NT75451 parallel interface (used on NGX BlueBoards)

The following Newhaven displays have been physically tested with and confirmed working:

• NHD-C12864WC-FSW-FBW-3V3-M
• NHD-C12864A1Z-FSW-FBW-HTT
• NHD-C12832A1Z-FSW-FBW-3V3
• ZOLEN-12864-FFSSWE-NAA

The following Electronic Assembly displays have been physically tested with and confirmed working:

• EA DOGL128

MCUs supported:

• Atmel AVR 8-bit
• NXP LPC111x ARM Cortex-M0
• NXP LPC11Uxx ARM Cortex-M0
• ST STM32 F0 ARM Cortex-M0
• ST STM32 F1 ARM Cortex-M3 (updated to new HAL and CubeMX)
• ST STM32 F4 ARM Cortex-M4
• Microchip PIC24H (and probably other 16-bit MCUs)

Development boards tested on (with on-board LCD):

• NGX BlueBoard LPC11U37 (with on-board NT75451 graphic LCD)

Development boards tested on (without on-board LCD):

• Microstick II with PIC24H and Nokia 3310/5110 LCD, ST7565R and ST7565P
• ST Nucleo F401RE.
• Olimex STM32-H103

Not all combinations of microcontroller platform and LCD controllers are supported out of the box. However you can edit the files devices/ and controllers/ and add your desired combination. More information on how to do this can be read in the doxygen documentation.

The following symbols need to be defined for the compiler:

Pick microcontroller type (pick one only):

GLCD_DEVICE_LPX111X
GLCD_DEVICE_LPX11UXX
GLCD_DEVICE_AVR8
GLCD_DEVICE_STM32F0XX
GLCD_DEVICE_STM32F10X
GLCD_DEVICE_STM32F4XX
GLCD_DEVICE_PIC24H

Pick LCD controller type (pick one only):

GLCD_CONTROLLER_PCD8544
GLCD_CONTROLLER_ST7565R
GLCD_CONTROLLER_NT75451

For ST7565P controllers, treat as ST7565R. For most if not all parts here, they behave the same way.

If using a parallel interface LCD (e.g NT75451 on NGX BlueBoard):

GLCD_USE_PARALLEL

When using SPI controllers:

GLCD_USE_SPI

Note the SPI symbol isn't actually checked by the source at the moment, and it is fine if it is not used. It is for forward compatibility only. One day I may decide to check for it.

For the Newhaven displays using ST7565 based controllers listed above which have been tested as working, there are certain initialisation sequences which should be followed, and this may vary from display to display. To force a certain (and tested) initialisation sequence, define one of the following:

GLCD_INIT_NHD_C12832A1Z_FSW_FBW_3V3
GLCD_INIT_NHD_C12864A1Z_FSW_FBW_HTT
GLCD_INIT_NHD_C12864WC_FSW_FBW_3V3_M
GLCD_INIT_ZOLEN_12864_FFSSWE_NAA
GLCD_INIT_EA_DOGL128_LP
GLCD_INIT_EA_DOGL128_LV

If you don't specify a NHD model, ST7565 controller selection will default to GLCD_INIT_NHD_C12864WC_FSW_FBW_3V3_M sequence. This however may change in the future.

To set a reset time, used by the glcd_reset() function, set GLCD_RESET_TIME to desired duration in milliseconds.

These symbols need to be set in the configuration options of your IDE, usually in the "defined symbols" section, or they can be defined in a makefile as -D options.

Example:

-DGLCD_DEVICE_LPC111X

Some operations such as sending a reset pulse, requires the use of a delay timer. The library will refer to a external function called delay_ms(t) where t is the delay required in milliseconds. Please ensure you have this function elsewhere in your program.

If you are using avr-gcc with Atmel devices, you can force the library to use the built-in _delay_ms() function by setting the compiler symbols:

GLCD_USE_AVR_DELAY
__DELAY_BACKWARD_COMPATIBLE__

Refer to Doxygen generated pages for detailed documentation. You'll can generate the documentation yourself, simply install Doxygen and load the doxygen file in the root directory of the library and generate the documents in a file format of your choice (HTML, PDF, TEX etc).

There is also a online version (link at top of this document)