static int add_primitive_icosphere_exec(bContext *C, wmOperator *op)
{
Object *obedit;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
bool enter_editmode;
bool was_editmode;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
obedit = make_prim_init(C, CTX_DATA_(BLF_I18NCONTEXT_ID_MESH, "Icosphere"), &dia, mat, &was_editmode, loc, rot, layer);
em = BKE_editmesh_from_object(obedit);
if (!EDBM_op_call_and_selectf(
em, op, "verts.out", false,
"create_icosphere subdivisions=%i diameter=%f matrix=%m4",
RNA_int_get(op->ptr, "subdivisions"),
RNA_float_get(op->ptr, "size"), mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, obedit, was_editmode, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_cone_exec(bContext *C, wmOperator *op)
{
Object *obedit;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
bool enter_editmode;
unsigned int layer;
bool was_editmode;
const int end_fill_type = RNA_enum_get(op->ptr, "end_fill_type");
const bool cap_end = (end_fill_type != 0);
const bool cap_tri = (end_fill_type == 2);
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
obedit = make_prim_init(C, CTX_DATA_(BLF_I18NCONTEXT_ID_MESH, "Cone"), &dia, mat, &was_editmode, loc, rot, layer);
em = BKE_editmesh_from_object(obedit);
if (!EDBM_op_call_and_selectf(
em, op, "verts.out", false,
"create_cone segments=%i diameter1=%f diameter2=%f cap_ends=%b cap_tris=%b depth=%f matrix=%m4",
RNA_int_get(op->ptr, "vertices"), RNA_float_get(op->ptr, "radius1"),
RNA_float_get(op->ptr, "radius2"), cap_end, cap_tri, RNA_float_get(op->ptr, "depth"), mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, obedit, was_editmode, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_monkey_exec(bContext *C, wmOperator *op)
{
Object *obedit;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
bool enter_editmode;
bool is_view_aligned;
unsigned int layer;
bool was_editmode;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, &is_view_aligned);
if (!is_view_aligned)
rot[0] += (float)M_PI / 2.0f;
obedit = make_prim_init(C, CTX_DATA_(BLF_I18NCONTEXT_ID_MESH, "Suzanne"), &dia, mat, &was_editmode, loc, rot, layer);
dia = RNA_float_get(op->ptr, "radius");
mat[0][0] *= dia;
mat[1][1] *= dia;
mat[2][2] *= dia;
em = BKE_editmesh_from_object(obedit);
if (!EDBM_op_call_and_selectf(
em, op, "verts.out", false,
"create_monkey matrix=%m4", mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, obedit, was_editmode, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_cube_exec(bContext *C, wmOperator *op)
{
Object *obedit;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
bool enter_editmode;
bool was_editmode;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
obedit = make_prim_init(C, CTX_DATA_(BLF_I18NCONTEXT_ID_MESH, "Cube"), &dia, mat, &was_editmode, loc, rot, layer);
em = BKE_editmesh_from_object(obedit);
if (!EDBM_op_call_and_selectf(
em, op, "verts.out", false,
"create_cube matrix=%m4 size=%f",
mat, RNA_float_get(op->ptr, "radius") * 2.0f))
{
return OPERATOR_CANCELLED;
}
/* BMESH_TODO make plane side this: M_SQRT2 - plane (diameter of 1.41 makes it unit size) */
make_prim_finish(C, obedit, was_editmode, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_icosphere_exec(bContext *C, wmOperator *op)
{
Object *obedit;
Mesh *me;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
int enter_editmode;
int state;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
make_prim_init(C, "Icosphere", &dia, mat, &state, loc, rot, layer);
obedit = CTX_data_edit_object(C);
me = obedit->data;
em = me->edit_btmesh;
if (!EDBM_op_call_and_selectf(
em, op, "vertout",
"create_icosphere subdivisions=%i diameter=%f mat=%m4",
RNA_int_get(op->ptr, "subdivisions"),
RNA_float_get(op->ptr, "size"), mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, &state, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_monkey_exec(bContext *C, wmOperator *op)
{
Object *obedit;
Mesh *me;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
int enter_editmode;
int state, view_aligned;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, &view_aligned);
if (!view_aligned)
rot[0] += M_PI / 2.0f;
make_prim_init(C, "Monkey", &dia, mat, &state, loc, rot, layer);
obedit = CTX_data_edit_object(C);
me = obedit->data;
em = me->edit_btmesh;
if (!EDBM_op_call_and_selectf(em, op, "vertout", "create_monkey mat=%m4", mat)) {
return OPERATOR_CANCELLED;
}
make_prim_finish(C, &state, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_cone_exec(bContext *C, wmOperator *op)
{
Object *obedit;
Mesh *me;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
int enter_editmode;
int state, cap_end, cap_tri;
unsigned int layer;
cap_end = RNA_enum_get(op->ptr, "end_fill_type");
cap_tri = (cap_end == 2);
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
make_prim_init(C, "Cone", &dia, mat, &state, loc, rot, layer);
obedit = CTX_data_edit_object(C);
me = obedit->data;
em = me->edit_btmesh;
if (!EDBM_op_call_and_selectf(
em, op, "vertout",
"create_cone segments=%i diameter1=%f diameter2=%f cap_ends=%b cap_tris=%b depth=%f mat=%m4",
RNA_int_get(op->ptr, "vertices"), RNA_float_get(op->ptr, "radius1"),
RNA_float_get(op->ptr, "radius2"), cap_end, cap_tri, RNA_float_get(op->ptr, "depth"), mat))
{
return OPERATOR_CANCELLED;
}
make_prim_finish(C, &state, enter_editmode);
return OPERATOR_FINISHED;
}
static int add_primitive_cube_exec(bContext *C, wmOperator *op)
{
Object *obedit;
Mesh *me;
BMEditMesh *em;
float loc[3], rot[3], mat[4][4], dia;
int enter_editmode;
int state;
unsigned int layer;
ED_object_add_generic_get_opts(C, op, loc, rot, &enter_editmode, &layer, NULL);
make_prim_init(C, "Cube", &dia, mat, &state, loc, rot, layer);
obedit = CTX_data_edit_object(C);
me = obedit->data;
em = me->edit_btmesh;
if (!EDBM_op_call_and_selectf(em, op, "vertout", "create_cube mat=%m4 size=%f", mat, dia * 2.0f)) {
return OPERATOR_CANCELLED;
}
/* BMESH_TODO make plane side this: M_SQRT2 - plane (diameter of 1.41 makes it unit size) */
make_prim_finish(C, &state, enter_editmode);
return OPERATOR_FINISHED;
}