static __s32 LCD_open_flow(__u32 sel)
{
LCD_OPEN_FUNC(sel, LCD_power_on, 10); //打开LCD供电,并延迟10ms
LCD_OPEN_FUNC(sel, TCON_open, 200); //打开LCD控制器,并延迟200ms
LCD_OPEN_FUNC(sel, LCD_bl_open, 0); //打开背光,并延迟0ms
return 0;
}
static __s32 LCD_open_flow(__u32 sel)
{
LCD_OPEN_FUNC(sel, LCD_power_on, 50); //open lcd power, and delay 50ms
LCD_OPEN_FUNC(sel, TCON_open, 500); //open lcd controller, and delay 500ms
LCD_OPEN_FUNC(sel, LCD_bl_open, 0); //open lcd backlight, and delay 0ms
return 0;
}
/**********************************************************************
*
* lcd flow function
*
**********************************************************************/
static __s32 LCD_open_flow(__u32 sel)
{
LCD_OPEN_FUNC(sel, LCD_power_on, 50); //open lcd power, than delay 50ms
// LCD_OPEN_FUNC(sel, LCD_panel_init, 50); //not in need
LCD_OPEN_FUNC(sel, TCON_open, 500); //open lcd controller, than delay 500ms
LCD_OPEN_FUNC(sel, LCD_bl_open, 0); //open lcd backlight, than delay 0ms
return 0;
}
static s32 LCD_open_flow(u32 sel)
{
LCD_OPEN_FUNC(sel, LCD_power_on, 100); //open lcd power, and delay 50ms
LCD_OPEN_FUNC(sel, LCD_panel_init, 200); //open lcd power, than delay 200ms
LCD_OPEN_FUNC(sel, sunxi_lcd_tcon_enable, 100); //open lcd controller, and delay 100ms
LCD_OPEN_FUNC(sel, LCD_bl_open, 0); //open lcd backlight, and delay 0ms
return 0;
}
static s32 LCD_open_flow(u32 sel)
{
LCD_OPEN_FUNC(sel, LCD_power_on, 200); //open lcd power, and delay 50ms
LCD_OPEN_FUNC(sel, LCD_panel_init, 150); //open lcd power, than delay 200ms
LCD_OPEN_FUNC(sel, sunxi_lcd_tcon_enable,300); //open lcd controller, and delay 100ms
LCD_OPEN_FUNC(sel, LCD_bl_open, 0); //open lcd backlight, and delay 0ms
dprintk("***LCD_open_flow_kernel\n");
return 0;
}
static __s32 LCD_open_flow(__u32 sel)
{
LCD_OPEN_FUNC(sel, LCD_power_on , 50); //open lcd power, and delay 10ms
LCD_OPEN_FUNC(sel, LCD_io_init , 20); //request and init gpio, and delay 20ms
LCD_OPEN_FUNC(sel, TCON_open , 500); //open lcd controller, and delay 200ms
LCD_OPEN_FUNC(sel, LCD_open_cmd , 10); //use gpio to config lcd module to the work mode, and delay 10ms
LCD_OPEN_FUNC(sel, LCD_bl_open , 0); //open lcd backlight, and delay 0ms
return 0;
}
static __s32 LCD_open_flow(__u32 sel)
{
LCD_OPEN_FUNC(sel, LCD_power_on , 10); //打开LCD供电，并延时10ms
LCD_OPEN_FUNC(sel, TCON_open , 200); //打开LCD控制器，并延时200ms
LCD_OPEN_FUNC(sel, LCD_open_cmd , 100); //通过IO配置LCD模组为工作模式，并延时100ms
LCD_OPEN_FUNC(sel, LCD_bl_open , 0); //打开背光，并延时0ms
LCD_OPEN_FUNC(sel, LCD_init_isr, 0); //初始化CPU PANEL 中断服务程序，并延时 0ms
return 0;
}
static __s32 LCD_open_flow(__u32 sel)
{
LCD_OPEN_FUNC(sel, LCD_power_on , 10); //打开LCD供电，并延时10ms
LCD_OPEN_FUNC(sel, LCD_io_init , 20); //申请和初始化IO，并延时20ms
LCD_OPEN_FUNC(sel, TCON_open , 200); //打开LCD控制器，并延时200ms
LCD_OPEN_FUNC(sel, LCD_open_cmd , 10); //通过IO配置LCD模组为工作模式，并延时10ms
LCD_OPEN_FUNC(sel, LCD_bl_open , 0); //打开背光，并延时0ms
return 0;
}