void user_init(void)
{
system_set_os_print(0);
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(1000000);
CFG_Load();
// Initialize the GPIO subsystem.
gpio_init();
//Set GPIO2 to output mode
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_GPIO2);
//Set GPIO2 high
gpio_output_set(ROOMBA_WAKEUP_PIN, 0, ROOMBA_WAKEUP_PIN, 0);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
}
void user_init(void)
{
uart_init(BIT_RATE_9600, BIT_RATE_9600);
os_install_putc1((void *)uart_putc1);
avr_uart_override_rx_intr ();
os_delay_us(1000000);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
avr_init_task ();
avr_reg_msg_callback(avr_msg_cb);
}
//------------------------------------------------------------------------------------
// MQTT class implementation
//------------------------------------------------------------------------------------
MQTT::MQTT(const char* client_id, const char* host, uint32_t port) :
onMqttConnectedCb(0)
,onMqttDisconnectedCb(0)
,onMqttPublishedCb(0)
,onMqttDataCb(0)
,onMqttDataRawCb(0)
{
// init connections
MQTT_InitConnection(&mqttClient, host, port);
// init client
MQTT_InitClient(&mqttClient, (uint8_t*)client_id, (uint8_t*)"", (uint8_t*)"", 120, 1);
// init LWT
MQTT_InitLWT(&mqttClient, (uint8_t*)"/lwt", (uint8_t*)"offline", 0, 0);
// set user data
mqttClient.user_data = (void*)this;
// setup callbacks
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
MQTT_OnTimeout(&mqttClient, mqttTimeoutCb);
}
void ICACHE_FLASH_ATTR
mqtt_init() {
MQTT_InitConnection(&mqttClient, config.mqtt_host, config.mqtt_port, config.security);
MQTT_InitClient(&mqttClient, config.device_id, config.mqtt_user, config.mqtt_pass, config.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqtt_connected_cb);
MQTT_OnDisconnected(&mqttClient, mqtt_disconnected_cb);
MQTT_OnPublished(&mqttClient, mqtt_published_cb);
MQTT_OnData(&mqttClient, mqtt_data_cb);
}
void ICACHE_FLASH_ATTR mqttstart() {
#ifdef MENJINDEBUG
os_printf("mqtt client starting....");
#endif
MQTT_InitConnection(&mqttClient, "192.168.1.1", 1883, 0);
MQTT_InitClient(&mqttClient, "esp_8266", "", "", 10, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
}
void ICACHE_FLASH_ATTR mqtt_app_init(){
MQTT_InitConnection(&mqtt_client, MQTT_SERVER_IP, 1883, 0);
MQTT_InitClient(&mqtt_client, SERIAL_NUMBER, NULL, NULL, 120, 1);
MQTT_OnConnected(&mqtt_client, mqttConnectedCb);
MQTT_OnDisconnected(&mqtt_client, mqttDisconnectedCb);
MQTT_OnPublished(&mqtt_client, mqttPublishedCb);
MQTT_OnData(&mqtt_client, mqttDataCb);
//arm mqtt timer
os_memset(&mqtt_timer,0,sizeof(os_timer_t));
os_timer_disarm(&mqtt_timer);
os_timer_setfn(&mqtt_timer, (os_timer_func_t *)mqtt_app_timer_cb, NULL);
}
static void ICACHE_FLASH_ATTR udp_received(void *arg, char *data, unsigned short len)
{
struct espconn *udpconn= (struct espconn*)arg;
if (len > 5 && strncmp(data, "HAP", 3) == 0)
{
const char* hapServer = &data[5];
if (strcmp(settings.serverName, hapServer) != 0)
return;
remot_info *info = NULL;
espconn_get_connection_info(udpconn, &info, 0);
uint16_t port = (data[3] << 8) | data[4];
uint32_t address = *(uint32_t*)info->remote_ip;
if (port == hapPort && address == hapAddress)
return;
hapAddress = address;
hapPort = port;
static bool inited = false;
DEBUG_PRINT("[HAP]Discover from "IPSTR":%d\n", IP2STR(&address), port);
if (inited)
{
MQTT_Disconnect(&mqttClient);
DEBUG_PRINT("[HAP]Disconnect MQTT\n");
}
char aux[20];
os_sprintf(aux, IPSTR, IP2STR(&address));
MQTT_InitConnection(&mqttClient, aux, hapPort);
os_sprintf(aux, "client_%d", system_get_chip_id());
MQTT_InitClient(&mqttClient, aux, settings.mqttUser, settings.mqttPassword, MQTT_KEEPALIVE, 1);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
MQTT_Connect(&mqttClient);
inited = true;
}
}
void user_init(void)
{
uart_init(BIT_RATE_230400, BIT_RATE_230400);
system_set_os_print(1); // enable/disable operating system printout
os_sprintf(topic_temp, MQTT_TOPICTEMP, system_get_chip_id());
os_sprintf(topic_hum, MQTT_TOPICHUM, system_get_chip_id());
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U, FUNC_GPIO13);
ETS_GPIO_INTR_DISABLE(); // Disable gpio interrupts
ETS_GPIO_INTR_ATTACH(interrupt_test, 4);
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO4_U, FUNC_GPIO4);
gpio_output_set(0, 0, 0, GPIO_ID_PIN(4)); // Set GPIO12 as input
GPIO_REG_WRITE(GPIO_STATUS_W1TC_ADDRESS, BIT(4));
gpio_pin_intr_state_set(GPIO_ID_PIN(4), GPIO_PIN_INTR_ANYEDGE);
ETS_GPIO_INTR_ENABLE(); // Enable gpio interrupts
config_load();
DHTInit(DHT11);
MQTT_InitConnection(&mqttClient, config.mqtt_host, config.mqtt_port, config.security);
MQTT_InitClient(&mqttClient, config.device_id, config.mqtt_user, config.mqtt_pass, config.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "lwt/", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqtt_connected_cb);
MQTT_OnDisconnected(&mqttClient, mqtt_disconnected_cb);
MQTT_OnPublished(&mqttClient, mqtt_published_cb);
MQTT_OnData(&mqttClient, mqtt_data_cb);
WIFI_Connect(config.sta_ssid, config.sta_pwd, wifi_connect_cb);
os_timer_disarm(&dhtTimer);
os_timer_setfn(&dhtTimer, (os_timer_func_t *)dhtCb, (void *)0);
os_timer_arm(&dhtTimer, DELAY, 1);
os_timer_disarm(&hbTimer);
os_timer_setfn(&hbTimer, (os_timer_func_t *)application_heartbeat, (void *)0);
os_timer_arm(&hbTimer, 60000, 1);
INFO("\r\nSystem started ...\r\n");
}
void ICACHE_FLASH_ATTR
mqtt_client_init()
{
MQTT_Init(&mqttClient, flashConfig.mqtt_host, flashConfig.mqtt_port, 0, flashConfig.mqtt_timeout,
flashConfig.mqtt_clientid, flashConfig.mqtt_username, flashConfig.mqtt_password,
flashConfig.mqtt_keepalive);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
// Don't connect now, wait for a wifi status change callback
//if (flashConfig.mqtt_enable && strlen(flashConfig.mqtt_host) > 0)
// MQTT_Connect(&mqttClient);
wifiAddStateChangeCb(wifiStateChangeCb);
}
//Main routine. Initialize stdout, the I/O and the webserver and we're done.
void user_init(void) {
// HTTPD
stdoutInit();
ioInit();
httpdInit(builtInUrls, 80);
//MQTT
uart_init(115200, 115200);
CFG_Load();
sleepms(1000);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, SEC_NONSSL);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
// MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
INFO("device_ID:%s\r\n",sysCfg.device_id);
INFO("MQTTHOST:%s\r\n",sysCfg.mqtt_host);
//DS18B20 timers
os_timer_disarm(&ds18b20_timer);
os_timer_setfn(&ds18b20_timer, (os_timer_func_t *)ds18b20_cb, (void *)0);
os_timer_arm(&ds18b20_timer, DELAY, 1);
//NTP timers
ntp_get_time();
os_timer_disarm(&NTP_timer);
os_timer_setfn(&NTP_timer, (os_timer_func_t *)ntp_get_time, (void *)0);
os_timer_arm(&NTP_timer, NTPDELAY, 1);
// initialize GPIO2
PIN_FUNC_SELECT(PIN_GPIO2_MUX, PIN_GPIO2_FUNC);
GPIO_OUTPUT_SET(PIN_GPIO2, 0);
INFO("GPIO2 set to OFF\r\n");
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
os_printf("\nReady\n");
}
void ICACHE_FLASH_ATTR u_mqtt_init()
{
CFG_Load();
/*
* Original, old call with SSID and Passwd included.
* WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
*
* NOTE:- Our WiFi-Connect callback calls the MQTT_Connect function,
* which in turn will call the mqttConnectCb() function when
* communications with the MQTT servcer are established.
*/
WIFI_Connect(wifiConnectCb);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
}
void user_init(void)
{
//uart_init(BIT_RATE_115200, BIT_RATE_115200);
uart_init(BIT_RATE_9600, BIT_RATE_115200);
os_delay_us(1000000);
CFG_Load();
//MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
MQTT_InitConnection(&mqttClient, "user.jdaiot.com", 1883, 0);
//MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
MQTT_InitClient(&mqttClient, "g500001", "LASS", "LaSS2015", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
//// modified for LASS
system_os_task(recvTask, recvTaskPrio, recvTaskQueue, recvTaskQueueLen);
tick=0;
refreshTime=10;
// turn off timer
os_timer_disarm(&tmr0);
//
// set the timer call back function
//
os_timer_setfn(&tmr0, tsr0, &mqttClient);
//
// turn timer on to trigger each .5 second
//
os_timer_arm(&tmr0, 5000, 1); //every 5 second
INFO("\r\nSystem started ...\r\n");
}
void user_init(void)
{
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(1000000);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
}
void ICACHE_FLASH_ATTR mqtt_app_init(){
//set relays
int i;
for(i=0;i<relay_count();i++){
relays[i].id=i;
os_strcpy(relays[i].topic,"relay/");
os_strcat(relays[i].topic,SERIAL_NUMBER"/");
os_strcati(relays[i].topic,i);
}
//register listeners
relay_register_listener(mqtt_relay_change_cb);
MQTT_InitConnection(&mqtt_client, MQTT_SERVER_IP, 1883, 0);
MQTT_InitClient(&mqtt_client, SERIAL_NUMBER, NULL, NULL, 120, 1);
MQTT_OnConnected(&mqtt_client, mqttConnectedCb);
MQTT_OnDisconnected(&mqtt_client, mqttDisconnectedCb);
MQTT_OnPublished(&mqtt_client, mqttPublishedCb);
MQTT_OnData(&mqtt_client, mqttDataCb);
//arm mqtt timer
os_memset(&mqtt_timer,0,sizeof(os_timer_t));
os_timer_disarm(&mqtt_timer);
os_timer_setfn(&mqtt_timer, (os_timer_func_t *)mqtt_app_timer_cb, NULL);
os_timer_arm(&mqtt_timer, 2000, 1);
//arm sensor read timer
os_memset(&sensor_read_timer,0,sizeof(os_timer_t));
os_timer_disarm(&sensor_read_timer);
os_timer_setfn(&sensor_read_timer, (os_timer_func_t *)sensor_read_timer_cb, NULL);
os_timer_arm(&sensor_read_timer, 5000, 1);
}
void user_init(void)
{
int access_point = 1;
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(1000000);
if(access_point) {
wifi_set_opmode(STATIONAP_MODE);
} else {
gpio_init();
PIN_FUNC_SELECT(PERIPHS_IO_MUX_U0TXD_U, FUNC_GPIO1);
gpio_output_set(0, 0, (1 << pin), 0);
CFG_Load();
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.security);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
INFO("\r\nSystem started ...\r\n");
}
}
//Main routine
void ICACHE_FLASH_ATTR user_init(void) {
stdoutInit();
os_delay_us(100000);
CFG_Load();
ioInit();
WIFI_Connect(wifiConnectCb);
httpdInit(builtInUrls, sysCfg.httpd_port);
if(sysCfg.ntp_enable==1) {
sntp_init(sysCfg.ntp_tz); //timezone
}
if(sysCfg.mqtt_enable==1) {
MQTT_InitConnection(&mqttClient, (uint8_t *)sysCfg.mqtt_host, sysCfg.mqtt_port, sysCfg.mqtt_use_ssl );
MQTT_InitClient(&mqttClient, (uint8_t *)sysCfg.mqtt_devid, (uint8_t *)sysCfg.mqtt_user, (uint8_t *)sysCfg.mqtt_pass, sysCfg.mqtt_keepalive,1);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
}
if(sysCfg.sensor_dht22_enable)
DHTInit(SENSOR_DHT22, 30000);
if(sysCfg.sensor_ds18b20_enable)
ds_init(30000);
broadcastd_init();
thermostat_init(30000);
/*
//Netbios to set the name
struct softap_config wiconfig;
os_memset(netbios_name, ' ', sizeof(netbios_name)-1);
if(wifi_softap_get_config(&wiconfig)) {
int i;
for(i = 0; i < sizeof(netbios_name)-1; i++) {
if(wiconfig.ssid[i] < ' ') break;
netbios_name[i] = wiconfig.ssid[i];
};
}
else os_sprintf(netbios_name, "ESP8266");
netbios_name[sizeof(netbios_name)-1]='\0';
netbios_init();
*/
os_printf("\nRelay Board Ready\n");
os_printf("Free heap size:%d\n",system_get_free_heap_size());
#ifdef CGIPWM_H
//Mind the PWM pin!! defined in pwm.h
duty=0;
pwm_init( 50, &duty);
pwm_set_duty(duty, 0);
pwm_start();
#endif
//OLEDInit();
}
//Main routine. Initialize stdout, the I/O and the webserver and we're done.
void user_init(void) {
// my stuff
dBR_BOILER_SET=65; // default setting 65C boiler temperature on reboot
dBR_TEMP_ROOM_SET=18; // default setting 18C room temperature on reboot
dBR_HUMIDITY_SET=60; // default setting 65% humidity target on reboot
dBR_MODE=2; // default BR MODE is AUTO
dDEVICE_MODE=1; // This mode defines if device uses remote (MQTT) management or uses local logics - 0 for remote, 1 for local mode. DEFAULT is 0 - remote
// HTTPD
stdoutInit();
ioInit();
httpdInit(builtInUrls, 80);
//MQTT
uart_init(115200, 115200);
CFG_Load();
sleepms(1000);
MQTT_InitConnection(&mqttClient, sysCfg.mqtt_host, sysCfg.mqtt_port, SEC_NONSSL);
//MQTT_InitConnection(&mqttClient, "192.168.11.122", 1880, 0);
MQTT_InitClient(&mqttClient, sysCfg.device_id, sysCfg.mqtt_user, sysCfg.mqtt_pass, sysCfg.mqtt_keepalive, 1);
//MQTT_InitClient(&mqttClient, "client_id", "user", "pass", 120, 1);
// MQTT_InitLWT(&mqttClient, "/lwt", "offline", 0, 0);
MQTT_OnConnected(&mqttClient, mqttConnectedCb);
MQTT_OnDisconnected(&mqttClient, mqttDisconnectedCb);
MQTT_OnPublished(&mqttClient, mqttPublishedCb);
MQTT_OnData(&mqttClient, mqttDataCb);
INFO("device_ID:%s\r\n",sysCfg.device_id);
INFO("MQTTHOST:%s\r\n",sysCfg.mqtt_host);
//DS18B20 timers
os_timer_disarm(&ds18b20_timer);
os_timer_setfn(&ds18b20_timer, (os_timer_func_t *)ds18b20_cb, (void *)0);
os_timer_arm(&ds18b20_timer, DELAY, 1);
// DHT22 initialize
DHTInit(DHT22, DELAY);
os_timer_disarm(&dht22_timer);
os_timer_setfn(&dht22_timer, (os_timer_func_t *)dht22_cb, (void *)0);
os_timer_arm(&dht22_timer, DELAY, 1);
// INPUT PIN initialize
ETS_GPIO_INTR_DISABLE(); // Disable gpio interrupts
ETS_GPIO_INTR_ATTACH(read_input_pin, 13); // GPIO13 interrupt handler
PIN_FUNC_SELECT(PIN_GPIO13_MUX, PIN_GPIO13_FUNC);
gpio_output_set(0, 0, 0, BIT13); // Set GPIO13 as input
PIN_PULLUP_EN(PIN_GPIO13_MUX); // Enable pullup
GPIO_REG_WRITE(GPIO_STATUS_W1TC_ADDRESS, BIT(13)); // Clear GPIO12 status
gpio_pin_intr_state_set(GPIO_ID_PIN(13), GPIO_PIN_INTR_NEGEDGE); // Interrupt on NEGATIVE GPIO13 edge
ETS_GPIO_INTR_ENABLE(); // Enable gpio interrupts
// INFO("Input pin INITIALIZED ! ! !");
// initialize GPIO12
PIN_FUNC_SELECT(PIN_GPIO12_MUX, PIN_GPIO12_FUNC);
GPIO_OUTPUT_SET(PIN_GPIO12, 0);
// INFO("GPIO12 set to OFF\r\n");
// initialize GPIO5
GPIO_OUTPUT_SET(PIN_GPIO5, 0);
// INFO("GPIO5 set to OFF\r\n");
// initialize GPIO14
PIN_FUNC_SELECT(PIN_GPIO14_MUX, PIN_GPIO14_FUNC);
GPIO_OUTPUT_SET(PIN_GPIO14, 0);
// INFO("GPIO14 set to OFF\r\n");
WIFI_Connect(sysCfg.sta_ssid, sysCfg.sta_pwd, wifiConnectCb);
os_printf("\nReady\n");
}