static void ehci_update_endpt2_dev_n_port(struct usb_device *udev, struct QH *qh) { struct usb_device *ttdev; int parent_devnum; if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL) return; /* * For full / low speed devices we need to get the devnum and portnr of * the tt, so of the first upstream usb-2 hub, there may be usb-1 hubs * in the tree before that one! */ #ifdef CONFIG_DM_USB /* * When called from usb-uclass.c: usb_scan_device() udev->dev points * to the parent udevice, not the actual udevice belonging to the * udev as the device is not instantiated yet. So when searching * for the first usb-2 parent start with udev->dev not * udev->dev->parent . */ struct udevice *parent; struct usb_device *uparent; ttdev = udev; parent = udev->dev; uparent = dev_get_parentdata(parent); while (uparent->speed != USB_SPEED_HIGH) { struct udevice *dev = parent; if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) { printf("ehci: Error cannot find high-speed parent of usb-1 device\n"); return; } ttdev = dev_get_parentdata(dev); parent = dev->parent; uparent = dev_get_parentdata(parent); } parent_devnum = uparent->devnum; #else ttdev = udev; while (ttdev->parent && ttdev->parent->speed != USB_SPEED_HIGH) ttdev = ttdev->parent; if (!ttdev->parent) return; parent_devnum = ttdev->parent->devnum; #endif qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(ttdev->portnr) | QH_ENDPT2_HUBADDR(parent_devnum)); }
static void ehci_update_endpt2_dev_n_port(struct usb_device *udev, struct QH *qh) { uint8_t portnr = 0; uint8_t hubaddr = 0; if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL) return; usb_find_usb2_hub_address_port(udev, &hubaddr, &portnr); qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(portnr) | QH_ENDPT2_HUBADDR(hubaddr)); }
static void ehci_update_endpt2_dev_n_port(struct usb_device *dev, struct QH *qh) { struct usb_device *ttdev; if (dev->speed != USB_SPEED_LOW && dev->speed != USB_SPEED_FULL) return; /* * For full / low speed devices we need to get the devnum and portnr of * the tt, so of the first upstream usb-2 hub, there may be usb-1 hubs * in the tree before that one! */ ttdev = dev; while (ttdev->parent && ttdev->parent->speed != USB_SPEED_HIGH) ttdev = ttdev->parent; if (!ttdev->parent) return; qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(ttdev->portnr) | QH_ENDPT2_HUBADDR(ttdev->parent->devnum)); }
static int ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, int length, struct devrequest *req) { ALLOC_ALIGN_BUFFER(struct QH, qh, 1, USB_DMA_MINALIGN); struct qTD *qtd; int qtd_count = 0; int qtd_counter = 0; volatile struct qTD *vtd; unsigned long ts; uint32_t *tdp; uint32_t endpt, maxpacket, token, usbsts; uint32_t c, toggle; uint32_t cmd; int timeout; int ret = 0; struct ehci_ctrl *ctrl = dev->controller; debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe, buffer, length, req); if (req != NULL) debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n", req->request, req->request, req->requesttype, req->requesttype, le16_to_cpu(req->value), le16_to_cpu(req->value), le16_to_cpu(req->index)); #define PKT_ALIGN 512 /* * The USB transfer is split into qTD transfers. Eeach qTD transfer is * described by a transfer descriptor (the qTD). The qTDs form a linked * list with a queue head (QH). * * Each qTD transfer starts with a new USB packet, i.e. a packet cannot * have its beginning in a qTD transfer and its end in the following * one, so the qTD transfer lengths have to be chosen accordingly. * * Each qTD transfer uses up to QT_BUFFER_CNT data buffers, mapped to * single pages. The first data buffer can start at any offset within a * page (not considering the cache-line alignment issues), while the * following buffers must be page-aligned. There is no alignment * constraint on the size of a qTD transfer. */ if (req != NULL) /* 1 qTD will be needed for SETUP, and 1 for ACK. */ qtd_count += 1 + 1; if (length > 0 || req == NULL) { /* * Determine the qTD transfer size that will be used for the * data payload (not considering the first qTD transfer, which * may be longer or shorter, and the final one, which may be * shorter). * * In order to keep each packet within a qTD transfer, the qTD * transfer size is aligned to PKT_ALIGN, which is a multiple of * wMaxPacketSize (except in some cases for interrupt transfers, * see comment in submit_int_msg()). * * By default, i.e. if the input buffer is aligned to PKT_ALIGN, * QT_BUFFER_CNT full pages will be used. */ int xfr_sz = QT_BUFFER_CNT; /* * However, if the input buffer is not aligned to PKT_ALIGN, the * qTD transfer size will be one page shorter, and the first qTD * data buffer of each transfer will be page-unaligned. */ if ((uint32_t)buffer & (PKT_ALIGN - 1)) xfr_sz--; /* Convert the qTD transfer size to bytes. */ xfr_sz *= EHCI_PAGE_SIZE; /* * Approximate by excess the number of qTDs that will be * required for the data payload. The exact formula is way more * complicated and saves at most 2 qTDs, i.e. a total of 128 * bytes. */ qtd_count += 2 + length / xfr_sz; } /* * Threshold value based on the worst-case total size of the allocated qTDs for * a mass-storage transfer of 65535 blocks of 512 bytes. */ #if CONFIG_SYS_MALLOC_LEN <= 64 + 128 * 1024 #warning CONFIG_SYS_MALLOC_LEN may be too small for EHCI #endif qtd = memalign(USB_DMA_MINALIGN, qtd_count * sizeof(struct qTD)); if (qtd == NULL) { printf("unable to allocate TDs\n"); return -1; } memset(qh, 0, sizeof(struct QH)); memset(qtd, 0, qtd_count * sizeof(*qtd)); toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); /* * Setup QH (3.6 in ehci-r10.pdf) * * qh_link ................. 03-00 H * qh_endpt1 ............... 07-04 H * qh_endpt2 ............... 0B-08 H * - qh_curtd * qh_overlay.qt_next ...... 13-10 H * - qh_overlay.qt_altnext */ qh->qh_link = cpu_to_hc32((uint32_t)&ctrl->qh_list | QH_LINK_TYPE_QH); c = (dev->speed != USB_SPEED_HIGH) && !usb_pipeendpoint(pipe); maxpacket = usb_maxpacket(dev, pipe); endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) | QH_ENDPT1_MAXPKTLEN(maxpacket) | QH_ENDPT1_H(0) | QH_ENDPT1_DTC(QH_ENDPT1_DTC_DT_FROM_QTD) | QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) | QH_ENDPT1_ENDPT(usb_pipeendpoint(pipe)) | QH_ENDPT1_I(0) | QH_ENDPT1_DEVADDR(usb_pipedevice(pipe)); qh->qh_endpt1 = cpu_to_hc32(endpt); endpt = QH_ENDPT2_MULT(1) | QH_ENDPT2_PORTNUM(dev->portnr) | QH_ENDPT2_HUBADDR(dev->parent->devnum) | QH_ENDPT2_UFCMASK(0) | QH_ENDPT2_UFSMASK(0); qh->qh_endpt2 = cpu_to_hc32(endpt); qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qh->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); tdp = &qh->qh_overlay.qt_next; if (req != NULL) { /* * Setup request qTD (3.5 in ehci-r10.pdf) * * qt_next ................ 03-00 H * qt_altnext ............. 07-04 H * qt_token ............... 0B-08 H * * [ buffer, buffer_hi ] loaded with "req". */ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); token = QT_TOKEN_DT(0) | QT_TOKEN_TOTALBYTES(sizeof(*req)) | QT_TOKEN_IOC(0) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | QT_TOKEN_PID(QT_TOKEN_PID_SETUP) | QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); qtd[qtd_counter].qt_token = cpu_to_hc32(token); if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req))) { printf("unable to construct SETUP TD\n"); goto fail; } /* Update previous qTD! */ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]); tdp = &qtd[qtd_counter++].qt_next; toggle = 1; } if (length > 0 || req == NULL) { uint8_t *buf_ptr = buffer; int left_length = length; do { /* * Determine the size of this qTD transfer. By default, * QT_BUFFER_CNT full pages can be used. */ int xfr_bytes = QT_BUFFER_CNT * EHCI_PAGE_SIZE; /* * However, if the input buffer is not page-aligned, the * portion of the first page before the buffer start * offset within that page is unusable. */ xfr_bytes -= (uint32_t)buf_ptr & (EHCI_PAGE_SIZE - 1); /* * In order to keep each packet within a qTD transfer, * align the qTD transfer size to PKT_ALIGN. */ xfr_bytes &= ~(PKT_ALIGN - 1); /* * This transfer may be shorter than the available qTD * transfer size that has just been computed. */ xfr_bytes = min(xfr_bytes, left_length); /* * Setup request qTD (3.5 in ehci-r10.pdf) * * qt_next ................ 03-00 H * qt_altnext ............. 07-04 H * qt_token ............... 0B-08 H * * [ buffer, buffer_hi ] loaded with "buffer". */ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); token = QT_TOKEN_DT(toggle) | QT_TOKEN_TOTALBYTES(xfr_bytes) | QT_TOKEN_IOC(req == NULL) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | QT_TOKEN_PID(usb_pipein(pipe) ? QT_TOKEN_PID_IN : QT_TOKEN_PID_OUT) | QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); qtd[qtd_counter].qt_token = cpu_to_hc32(token); if (ehci_td_buffer(&qtd[qtd_counter], buf_ptr, xfr_bytes)) { printf("unable to construct DATA TD\n"); goto fail; } /* Update previous qTD! */ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]); tdp = &qtd[qtd_counter++].qt_next; /* * Data toggle has to be adjusted since the qTD transfer * size is not always an even multiple of * wMaxPacketSize. */ if ((xfr_bytes / maxpacket) & 1) toggle ^= 1; buf_ptr += xfr_bytes; left_length -= xfr_bytes; } while (left_length > 0); } if (req != NULL) { /* * Setup request qTD (3.5 in ehci-r10.pdf) * * qt_next ................ 03-00 H * qt_altnext ............. 07-04 H * qt_token ............... 0B-08 H */ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); token = QT_TOKEN_DT(1) | QT_TOKEN_TOTALBYTES(0) | QT_TOKEN_IOC(1) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | QT_TOKEN_PID(usb_pipein(pipe) ? QT_TOKEN_PID_OUT : QT_TOKEN_PID_IN) | QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); qtd[qtd_counter].qt_token = cpu_to_hc32(token); /* Update previous qTD! */ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]); tdp = &qtd[qtd_counter++].qt_next; } ctrl->qh_list.qh_link = cpu_to_hc32((uint32_t)qh | QH_LINK_TYPE_QH); /* Flush dcache */ flush_dcache_range((uint32_t)&ctrl->qh_list, ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1)); flush_dcache_range((uint32_t)qh, ALIGN_END_ADDR(struct QH, qh, 1)); flush_dcache_range((uint32_t)qtd, ALIGN_END_ADDR(struct qTD, qtd, qtd_count)); /* Set async. queue head pointer. */ ehci_writel(&ctrl->hcor->or_asynclistaddr, (uint32_t)&ctrl->qh_list); usbsts = ehci_readl(&ctrl->hcor->or_usbsts); ehci_writel(&ctrl->hcor->or_usbsts, (usbsts & 0x3f)); /* Enable async. schedule. */ cmd = ehci_readl(&ctrl->hcor->or_usbcmd); cmd |= CMD_ASE; ehci_writel(&ctrl->hcor->or_usbcmd, cmd); ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, STS_ASS, 100 * 1000); if (ret < 0) { printf("EHCI fail timeout STS_ASS set\n"); goto fail; } /* Wait for TDs to be processed. */ ts = get_timer(0); vtd = &qtd[qtd_counter - 1]; timeout = USB_TIMEOUT_MS(pipe); do { /* Invalidate dcache */ invalidate_dcache_range((uint32_t)&ctrl->qh_list, ALIGN_END_ADDR(struct QH, &ctrl->qh_list, 1)); invalidate_dcache_range((uint32_t)qh, ALIGN_END_ADDR(struct QH, qh, 1)); invalidate_dcache_range((uint32_t)qtd, ALIGN_END_ADDR(struct qTD, qtd, qtd_count)); token = hc32_to_cpu(vtd->qt_token); if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) break; WATCHDOG_RESET(); } while (get_timer(ts) < timeout); /* * Invalidate the memory area occupied by buffer * Don't try to fix the buffer alignment, if it isn't properly * aligned it's upper layer's fault so let invalidate_dcache_range() * vow about it. But we have to fix the length as it's actual * transfer length and can be unaligned. This is potentially * dangerous operation, it's responsibility of the calling * code to make sure enough space is reserved. */ invalidate_dcache_range((uint32_t)buffer, ALIGN((uint32_t)buffer + length, ARCH_DMA_MINALIGN)); /* Check that the TD processing happened */ if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) printf("EHCI timed out on TD - token=%#x\n", token); /* Disable async schedule. */ cmd = ehci_readl(&ctrl->hcor->or_usbcmd); cmd &= ~CMD_ASE; ehci_writel(&ctrl->hcor->or_usbcmd, cmd); ret = handshake((uint32_t *)&ctrl->hcor->or_usbsts, STS_ASS, 0, 100 * 1000); if (ret < 0) { printf("EHCI fail timeout STS_ASS reset\n"); goto fail; } token = hc32_to_cpu(qh->qh_overlay.qt_token); if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) { debug("TOKEN=%#x\n", token); switch (QT_TOKEN_GET_STATUS(token) & ~(QT_TOKEN_STATUS_SPLITXSTATE | QT_TOKEN_STATUS_PERR)) { case 0: toggle = QT_TOKEN_GET_DT(token); usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle); dev->status = 0; break; case QT_TOKEN_STATUS_HALTED: dev->status = USB_ST_STALLED; break; case QT_TOKEN_STATUS_ACTIVE | QT_TOKEN_STATUS_DATBUFERR: case QT_TOKEN_STATUS_DATBUFERR: dev->status = USB_ST_BUF_ERR; break; case QT_TOKEN_STATUS_HALTED | QT_TOKEN_STATUS_BABBLEDET: case QT_TOKEN_STATUS_BABBLEDET: dev->status = USB_ST_BABBLE_DET; break; default: dev->status = USB_ST_CRC_ERR; if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_HALTED) dev->status |= USB_ST_STALLED; break; } dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token); } else { dev->act_len = 0; #ifndef CONFIG_USB_EHCI_FARADAY debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts), ehci_readl(&ctrl->hcor->or_portsc[0]), ehci_readl(&ctrl->hcor->or_portsc[1])); #endif } free(qtd); return (dev->status != USB_ST_NOT_PROC) ? 0 : -1; fail: free(qtd); return -1; }