CORE_ADDR
sparcnbsd_step_trap (struct frame_info *frame, unsigned long insn)
{
if ((X_I (insn) == 0 && X_RS1 (insn) == 0 && X_RS2 (insn) == 0)
|| (X_I (insn) == 1 && X_RS1 (insn) == 0 && (insn & 0x7f) == 0))
{
/* "New" system call. */
ULONGEST number = get_frame_register_unsigned (frame, SPARC_G1_REGNUM);
if (number & 0x400)
return get_frame_register_unsigned (frame, SPARC_G2_REGNUM);
if (number & 0x800)
return get_frame_register_unsigned (frame, SPARC_G7_REGNUM);
}
return 0;
}
static CORE_ADDR
sparc32_skip_prologue (CORE_ADDR start_pc)
{
struct symtab_and_line sal;
CORE_ADDR func_start, func_end;
struct sparc_frame_cache cache;
/* This is the preferred method, find the end of the prologue by
using the debugging information. */
if (find_pc_partial_function (start_pc, NULL, &func_start, &func_end))
{
sal = find_pc_line (func_start, 0);
if (sal.end < func_end
&& start_pc <= sal.end)
return sal.end;
}
start_pc = sparc_analyze_prologue (start_pc, 0xffffffffUL, &cache);
/* The psABI says that "Although the first 6 words of arguments
reside in registers, the standard stack frame reserves space for
them.". It also suggests that a function may use that space to
"write incoming arguments 0 to 5" into that space, and that's
indeed what GCC seems to be doing. In that case GCC will
generate debug information that points to the stack slots instead
of the registers, so we should consider the instructions that
write out these incoming arguments onto the stack. Of course we
only need to do this if we have a stack frame. */
while (!cache.frameless_p)
{
unsigned long insn = sparc_fetch_instruction (start_pc);
/* Recognize instructions that store incoming arguments in
%i0...%i5 into the corresponding stack slot. */
if (X_OP (insn) == 3 && (X_OP3 (insn) & 0x3c) == 0x04 && X_I (insn)
&& (X_RD (insn) >= 24 && X_RD (insn) <= 29) && X_RS1 (insn) == 30
&& X_SIMM13 (insn) == 68 + (X_RD (insn) - 24) * 4)
{
start_pc += 4;
continue;
}
break;
}
return start_pc;
}
int
print_insn_sparc (bfd_vma memaddr, disassemble_info *info)
{
FILE *stream = info->stream;
bfd_byte buffer[4];
unsigned long insn;
sparc_opcode_hash *op;
/* Nonzero of opcode table has been initialized. */
static int opcodes_initialized = 0;
/* bfd mach number of last call. */
static unsigned long current_mach = 0;
bfd_vma (*getword) (const void *);
if (!opcodes_initialized
|| info->mach != current_mach)
{
int i;
current_arch_mask = compute_arch_mask (info->mach);
if (!opcodes_initialized)
sorted_opcodes =
xmalloc (sparc_num_opcodes * sizeof (sparc_opcode *));
/* Reset the sorted table so we can resort it. */
for (i = 0; i < sparc_num_opcodes; ++i)
sorted_opcodes[i] = &sparc_opcodes[i];
qsort ((char *) sorted_opcodes, sparc_num_opcodes,
sizeof (sorted_opcodes[0]), compare_opcodes);
build_hash_table (sorted_opcodes, opcode_hash_table, sparc_num_opcodes);
current_mach = info->mach;
opcodes_initialized = 1;
}
{
int status =
(*info->read_memory_func) (memaddr, buffer, sizeof (buffer), info);
if (status != 0)
{
(*info->memory_error_func) (status, memaddr, info);
return -1;
}
}
/* On SPARClite variants such as DANlite (sparc86x), instructions
are always big-endian even when the machine is in little-endian mode. */
if (info->endian == BFD_ENDIAN_BIG || info->mach == bfd_mach_sparc_sparclite)
getword = bfd_getb32;
else
getword = bfd_getl32;
insn = getword (buffer);
info->insn_info_valid = 1; /* We do return this info. */
info->insn_type = dis_nonbranch; /* Assume non branch insn. */
info->branch_delay_insns = 0; /* Assume no delay. */
info->target = 0; /* Assume no target known. */
for (op = opcode_hash_table[HASH_INSN (insn)]; op; op = op->next)
{
const sparc_opcode *opcode = op->opcode;
/* If the insn isn't supported by the current architecture, skip it. */
if (! (opcode->architecture & current_arch_mask))
continue;
if ((opcode->match & insn) == opcode->match
&& (opcode->lose & insn) == 0)
{
/* Nonzero means that we have found an instruction which has
the effect of adding or or'ing the imm13 field to rs1. */
int imm_added_to_rs1 = 0;
int imm_ored_to_rs1 = 0;
/* Nonzero means that we have found a plus sign in the args
field of the opcode table. */
int found_plus = 0;
/* Nonzero means we have an annulled branch. */
int is_annulled = 0;
/* Do we have an `add' or `or' instruction combining an
immediate with rs1? */
if (opcode->match == 0x80102000) /* or */
imm_ored_to_rs1 = 1;
if (opcode->match == 0x80002000) /* add */
imm_added_to_rs1 = 1;
if (X_RS1 (insn) != X_RD (insn)
&& strchr (opcode->args, 'r') != 0)
/* Can't do simple format if source and dest are different. */
continue;
if (X_RS2 (insn) != X_RD (insn)
&& strchr (opcode->args, 'O') != 0)
/* Can't do simple format if source and dest are different. */
continue;
(*info->fprintf_func) (stream, "%s", opcode->name);
{
const char *s;
if (opcode->args[0] != ',')
(*info->fprintf_func) (stream, " ");
for (s = opcode->args; *s != '\0'; ++s)
{
while (*s == ',')
{
(*info->fprintf_func) (stream, ",");
++s;
switch (*s)
{
case 'a':
(*info->fprintf_func) (stream, "a");
is_annulled = 1;
++s;
continue;
case 'N':
(*info->fprintf_func) (stream, "pn");
++s;
continue;
case 'T':
(*info->fprintf_func) (stream, "pt");
++s;
continue;
default:
break;
}
}
(*info->fprintf_func) (stream, " ");
switch (*s)
{
case '+':
found_plus = 1;
/* Fall through. */
default:
(*info->fprintf_func) (stream, "%c", *s);
break;
case '#':
(*info->fprintf_func) (stream, "0");
break;
#define reg(n) (*info->fprintf_func) (stream, "%%%s", reg_names[n])
case '1':
case 'r':
reg (X_RS1 (insn));
break;
case '2':
case 'O':
reg (X_RS2 (insn));
break;
case 'd':
reg (X_RD (insn));
break;
#undef reg
#define freg(n) (*info->fprintf_func) (stream, "%%%s", freg_names[n])
#define fregx(n) (*info->fprintf_func) (stream, "%%%s", freg_names[((n) & ~1) | (((n) & 1) << 5)])
case 'e':
freg (X_RS1 (insn));
break;
case 'v': /* Double/even. */
case 'V': /* Quad/multiple of 4. */
fregx (X_RS1 (insn));
break;
case 'f':
freg (X_RS2 (insn));
break;
case 'B': /* Double/even. */
case 'R': /* Quad/multiple of 4. */
fregx (X_RS2 (insn));
break;
case '4':
freg (X_RS3 (insn));
break;
case '5': /* Double/even. */
fregx (X_RS3 (insn));
break;
case 'g':
freg (X_RD (insn));
break;
case 'H': /* Double/even. */
case 'J': /* Quad/multiple of 4. */
case '}': /* Double/even. */
fregx (X_RD (insn));
break;
#undef freg
#undef fregx
#define creg(n) (*info->fprintf_func) (stream, "%%c%u", (unsigned int) (n))
case 'b':
creg (X_RS1 (insn));
break;
case 'c':
creg (X_RS2 (insn));
break;
case 'D':
creg (X_RD (insn));
break;
#undef creg
case 'h':
(*info->fprintf_func) (stream, "%%hi(%#x)",
((unsigned) 0xFFFFFFFF
& ((int) X_IMM22 (insn) << 10)));
break;
case 'i': /* 13 bit immediate. */
case 'I': /* 11 bit immediate. */
case 'j': /* 10 bit immediate. */
{
int imm;
if (*s == 'i')
imm = X_SIMM (insn, 13);
else if (*s == 'I')
imm = X_SIMM (insn, 11);
else
imm = X_SIMM (insn, 10);
/* Check to see whether we have a 1+i, and take
note of that fact.
Note: because of the way we sort the table,
we will be matching 1+i rather than i+1,
so it is OK to assume that i is after +,
not before it. */
if (found_plus)
imm_added_to_rs1 = 1;
if (imm <= 9)
(*info->fprintf_func) (stream, "%d", imm);
else
(*info->fprintf_func) (stream, "%#x", imm);
}
break;
case ')': /* 5 bit unsigned immediate from RS3. */
(info->fprintf_func) (stream, "%#x", (unsigned int) X_RS3 (insn));
break;
case 'X': /* 5 bit unsigned immediate. */
case 'Y': /* 6 bit unsigned immediate. */
{
int imm = X_IMM (insn, *s == 'X' ? 5 : 6);
if (imm <= 9)
(info->fprintf_func) (stream, "%d", imm);
else
(info->fprintf_func) (stream, "%#x", (unsigned) imm);
}
break;
case '3':
(info->fprintf_func) (stream, "%ld", X_IMM (insn, 3));
break;
case 'K':
{
int mask = X_MEMBAR (insn);
int bit = 0x40, printed_one = 0;
const char *name;
if (mask == 0)
(info->fprintf_func) (stream, "0");
else
while (bit)
{
if (mask & bit)
{
if (printed_one)
(info->fprintf_func) (stream, "|");
name = sparc_decode_membar (bit);
(info->fprintf_func) (stream, "%s", name);
printed_one = 1;
}
bit >>= 1;
}
break;
}
case '=':
info->target = memaddr + SEX (X_DISP10 (insn), 10) * 4;
(*info->print_address_func) (info->target, info);
break;
case 'k':
info->target = memaddr + SEX (X_DISP16 (insn), 16) * 4;
(*info->print_address_func) (info->target, info);
break;
case 'G':
info->target = memaddr + SEX (X_DISP19 (insn), 19) * 4;
(*info->print_address_func) (info->target, info);
break;
case '6':
case '7':
case '8':
case '9':
(*info->fprintf_func) (stream, "%%fcc%c", *s - '6' + '0');
break;
case 'z':
(*info->fprintf_func) (stream, "%%icc");
break;
case 'Z':
(*info->fprintf_func) (stream, "%%xcc");
break;
case 'E':
(*info->fprintf_func) (stream, "%%ccr");
break;
case 's':
(*info->fprintf_func) (stream, "%%fprs");
break;
case '{':
(*info->fprintf_func) (stream, "%%mcdper");
break;
case 'o':
(*info->fprintf_func) (stream, "%%asi");
break;
case 'W':
(*info->fprintf_func) (stream, "%%tick");
break;
case 'P':
(*info->fprintf_func) (stream, "%%pc");
break;
case '?':
if (X_RS1 (insn) == 31)
(*info->fprintf_func) (stream, "%%ver");
else if (X_RS1 (insn) == 23)
(*info->fprintf_func) (stream, "%%pmcdper");
else if ((unsigned) X_RS1 (insn) < 17)
(*info->fprintf_func) (stream, "%%%s",
v9_priv_reg_names[X_RS1 (insn)]);
else
(*info->fprintf_func) (stream, "%%reserved");
break;
case '!':
if (X_RD (insn) == 31)
(*info->fprintf_func) (stream, "%%ver");
else if (X_RD (insn) == 23)
(*info->fprintf_func) (stream, "%%pmcdper");
else if ((unsigned) X_RD (insn) < 17)
(*info->fprintf_func) (stream, "%%%s",
v9_priv_reg_names[X_RD (insn)]);
else
(*info->fprintf_func) (stream, "%%reserved");
break;
case '$':
if ((unsigned) X_RS1 (insn) < 32)
(*info->fprintf_func) (stream, "%%%s",
v9_hpriv_reg_names[X_RS1 (insn)]);
else
(*info->fprintf_func) (stream, "%%reserved");
break;
case '%':
if ((unsigned) X_RD (insn) < 32)
(*info->fprintf_func) (stream, "%%%s",
v9_hpriv_reg_names[X_RD (insn)]);
else
(*info->fprintf_func) (stream, "%%reserved");
break;
case '/':
if (X_RS1 (insn) < 16 || X_RS1 (insn) > 28)
(*info->fprintf_func) (stream, "%%reserved");
else
(*info->fprintf_func) (stream, "%%%s",
v9a_asr_reg_names[X_RS1 (insn)-16]);
break;
case '_':
if (X_RD (insn) < 16 || X_RD (insn) > 28)
(*info->fprintf_func) (stream, "%%reserved");
else
(*info->fprintf_func) (stream, "%%%s",
v9a_asr_reg_names[X_RD (insn)-16]);
break;
case '*':
{
const char *name = sparc_decode_prefetch (X_RD (insn));
if (name)
(*info->fprintf_func) (stream, "%s", name);
else
(*info->fprintf_func) (stream, "%ld", X_RD (insn));
break;
}
case 'M':
(*info->fprintf_func) (stream, "%%asr%ld", X_RS1 (insn));
break;
case 'm':
(*info->fprintf_func) (stream, "%%asr%ld", X_RD (insn));
break;
case 'L':
info->target = memaddr + SEX (X_DISP30 (insn), 30) * 4;
(*info->print_address_func) (info->target, info);
break;
case 'n':
(*info->fprintf_func)
(stream, "%#x", SEX (X_DISP22 (insn), 22));
break;
case 'l':
info->target = memaddr + SEX (X_DISP22 (insn), 22) * 4;
(*info->print_address_func) (info->target, info);
break;
case 'A':
{
const char *name = sparc_decode_asi (X_ASI (insn));
if (name)
(*info->fprintf_func) (stream, "%s", name);
else
(*info->fprintf_func) (stream, "(%ld)", X_ASI (insn));
break;
}
case 'C':
(*info->fprintf_func) (stream, "%%csr");
break;
case 'F':
(*info->fprintf_func) (stream, "%%fsr");
break;
case '(':
(*info->fprintf_func) (stream, "%%efsr");
break;
case 'p':
(*info->fprintf_func) (stream, "%%psr");
break;
case 'q':
(*info->fprintf_func) (stream, "%%fq");
break;
case 'Q':
(*info->fprintf_func) (stream, "%%cq");
break;
case 't':
(*info->fprintf_func) (stream, "%%tbr");
break;
case 'w':
(*info->fprintf_func) (stream, "%%wim");
break;
case 'x':
(*info->fprintf_func) (stream, "%ld",
((X_LDST_I (insn) << 8)
+ X_ASI (insn)));
break;
case 'y':
(*info->fprintf_func) (stream, "%%y");
break;
case 'u':
case 'U':
{
int val = *s == 'U' ? X_RS1 (insn) : X_RD (insn);
const char *name = sparc_decode_sparclet_cpreg (val);
if (name)
(*info->fprintf_func) (stream, "%s", name);
else
(*info->fprintf_func) (stream, "%%cpreg(%d)", val);
break;
}
}
}
}
/* If we are adding or or'ing something to rs1, then
check to see whether the previous instruction was
a sethi to the same register as in the sethi.
If so, attempt to print the result of the add or
or (in this context add and or do the same thing)
and its symbolic value. */
if (imm_ored_to_rs1 || imm_added_to_rs1)
{
unsigned long prev_insn;
int errcode;
if (memaddr >= 4)
errcode =
(*info->read_memory_func)
(memaddr - 4, buffer, sizeof (buffer), info);
else
errcode = 1;
prev_insn = getword (buffer);
if (errcode == 0)
{
/* If it is a delayed branch, we need to look at the
instruction before the delayed branch. This handles
sequences such as:
sethi %o1, %hi(_foo), %o1
call _printf
or %o1, %lo(_foo), %o1 */
if (is_delayed_branch (prev_insn))
{
if (memaddr >= 8)
errcode = (*info->read_memory_func)
(memaddr - 8, buffer, sizeof (buffer), info);
else
errcode = 1;
prev_insn = getword (buffer);
}
}
/* If there was a problem reading memory, then assume
the previous instruction was not sethi. */
if (errcode == 0)
{
/* Is it sethi to the same register? */
if ((prev_insn & 0xc1c00000) == 0x01000000
&& X_RD (prev_insn) == X_RS1 (insn))
{
(*info->fprintf_func) (stream, "\t! ");
info->target =
((unsigned) 0xFFFFFFFF
& ((int) X_IMM22 (prev_insn) << 10));
if (imm_added_to_rs1)
info->target += X_SIMM (insn, 13);
else
info->target |= X_SIMM (insn, 13);
(*info->print_address_func) (info->target, info);
info->insn_type = dis_dref;
info->data_size = 4; /* FIXME!!! */
}
}
}
if (opcode->flags & (F_UNBR|F_CONDBR|F_JSR))
{
/* FIXME -- check is_annulled flag. */
(void) is_annulled;
if (opcode->flags & F_UNBR)
info->insn_type = dis_branch;
if (opcode->flags & F_CONDBR)
info->insn_type = dis_condbranch;
if (opcode->flags & F_JSR)
info->insn_type = dis_jsr;
if (opcode->flags & F_DELAYED)
info->branch_delay_insns = 1;
}
return sizeof (buffer);
}
}