예제 #1
0
/* For each memory reference app instr, we insert inline code to fill the buffer
 * with an instruction entry and memory reference entries.
 */
static dr_emit_flags_t
event_app_instruction(void *drcontext, void *tag, instrlist_t *bb, instr_t *instr,
                      bool for_trace, bool translating, void *user_data)
{
    int i;
    reg_id_t *reg_next = (reg_id_t *)user_data;
    bool seen_memref = false;

    /* If the previous instruction was a write, we should handle it. */
    if (*reg_next != DR_REG_NULL)
        handle_post_write(drcontext, bb, instr, *reg_next);
    *reg_next = DR_REG_NULL;

    if (!instr_is_app(instr))
        return DR_EMIT_DEFAULT;
    if (!instr_writes_memory(instr))
        return DR_EMIT_DEFAULT;

    /* XXX: See above, in handle_post_write(). To simplify the handling of registers, we
     * assume no instruction has multiple distinct memory destination operands.
     */
    for (i = 0; i < instr_num_dsts(instr); ++i) {
        if (opnd_is_memory_reference(instr_get_dst(instr, i))) {
            if (seen_memref) {
                DR_ASSERT_MSG(false, "Found inst with multiple memory destinations");
                break;
            }
            *reg_next = instrument_mem(drcontext, bb, instr, instr_get_dst(instr, i));
            seen_memref = true;
        }
    }
    return DR_EMIT_DEFAULT;
}
예제 #2
0
파일: drmgr.c 프로젝트: unbaiat/robocheck
/* XXX: exporting this so drwrap can use it but I might prefer to have
 * this in drutil or the upcoming drsys
 */
DR_EXPORT
int
drmgr_decode_sysnum_from_wrapper(app_pc entry)
{
    void *drcontext = dr_get_current_drcontext();
    int num = -1;
    byte *pc = entry;
    uint opc;
    instr_t instr;
    instr_init(drcontext, &instr);
    do {
        instr_reset(drcontext, &instr);
        pc = decode(drcontext, pc, &instr);
        if (!instr_valid(&instr))
            break; /* unknown system call sequence */
        opc = instr_get_opcode(&instr);
        /* sanity check: wrapper should be short */
        if (pc - entry > 20)
            break; /* unknown system call sequence */
        if (opc == OP_mov_imm && opnd_is_reg(instr_get_dst(&instr, 0)) &&
            opnd_get_reg(instr_get_dst(&instr, 0)) == DR_REG_EAX &&
            opnd_is_immed_int(instr_get_src(&instr, 0))) {
            num = (int) opnd_get_immed_int(instr_get_src(&instr, 0));
            break; /* success */
        }
        /* stop at call to vsyscall (wow64) or at int itself */
    } while (opc != OP_call_ind && opc != OP_int &&
             opc != OP_sysenter && opc != OP_syscall);
    instr_free(drcontext, &instr);
    return num;
}
예제 #3
0
static dr_emit_flags_t
event_app_analysis(void *drcontext, void *tag, instrlist_t *bb,
                   bool for_trace, bool translating, OUT void **user_data)
{
    instr_t *inst, *label;
    bool prev_was_mov_const = false;
    ptr_int_t val1, val2;
    *user_data = NULL;
    /* Look for duplicate mov immediates telling us which subtest we're in */
    for (inst = instrlist_first_app(bb); inst != NULL; inst = instr_get_next_app(inst)) {
        if (instr_is_mov_constant(inst, prev_was_mov_const ? &val2 : &val1)) {
            if (prev_was_mov_const && val1 == val2 &&
                val1 != 0 && /* rule out xor w/ self */
                opnd_is_reg(instr_get_dst(inst, 0)) &&
                opnd_get_reg(instr_get_dst(inst, 0)) == TEST_REG) {
                *user_data = (void *) val1;
                label = INSTR_CREATE_label(drcontext);
                instr_set_translation(label, instr_get_app_pc(inst));
                instrlist_meta_postinsert(bb, inst, label);
            } else
                prev_was_mov_const = true;
        } else
            prev_was_mov_const = false;
    }
    return DR_EMIT_DEFAULT;
}
예제 #4
0
/* this is only called when the instrace mode is operand trace (this happens at the instrumentation time) */
static void operand_trace(instr_t * instr, void * drcontext){

	int i;
	char stringop[MAX_STRING_LENGTH];
	int pc = 0;
	per_thread_t * data = drmgr_get_tls_field(drcontext, tls_index);
	module_data_t * module_data = dr_lookup_module(instr_get_app_pc(instr));

	if (module_data != NULL){
		pc = instr_get_app_pc(instr) - module_data->start;
	}
	instr_disassemble_to_buffer(drcontext, instr, stringop, MAX_STRING_LENGTH);
	
	if (client_arg->instrace_mode == OPERAND_TRACE){

		dr_fprintf(data->outfile, "%s\n", stringop);

		for (i = 0; i < instr_num_dsts(instr); i++){
			opnd_disassemble_to_buffer(drcontext, instr_get_dst(instr, i), stringop, MAX_STRING_LENGTH);
			if ((instr_get_opcode(instr) == OP_lea) && opnd_is_base_disp(instr_get_dst(instr,i))){
				dr_fprintf(data->outfile, "dst-\n");
				print_base_disp_for_lea(data->outfile, instr_get_dst(instr, i));
			}
			else{
				dr_fprintf(data->outfile, "dst-%d-%s\n", i, stringop);
			}
		}

		for (i = 0; i < instr_num_srcs(instr); i++){
			opnd_disassemble_to_buffer(drcontext, instr_get_src(instr, i), stringop, MAX_STRING_LENGTH);
			if ((instr_get_opcode(instr) == OP_lea) && opnd_is_base_disp(instr_get_src(instr, i))){
				dr_fprintf(data->outfile, "src-\n");
				print_base_disp_for_lea(data->outfile, instr_get_src(instr, i));
			}
			else{
				dr_fprintf(data->outfile, "src-%d-%s\n", i, stringop);
			}
		}

		if (module_data != NULL){
			dr_fprintf(data->outfile, "app_pc-%d\n", pc);
		}
	}
	else if (client_arg->instrace_mode == INS_DISASM_TRACE){
		if (module_data != NULL){
			if (md_get_module_position(instrace_head, module_data->full_path) == -1){
				md_add_module(instrace_head, module_data->full_path, MAX_BBS_PER_MODULE);
			}
			dr_fprintf(data->outfile, "%d,%d,%s\n", md_get_module_position(instrace_head, module_data->full_path), pc, stringop);
		}
		else{
			dr_fprintf(data->outfile, "%d,%d,%s\n",0, 0, stringop);
		}
		
	}

	dr_free_module_data(module_data);

}
예제 #5
0
파일: staleness.c 프로젝트: steboe/drmemory
/* Our version, versus Dr. Memory's version in drmemory/fastpath.c */
bool
instr_ok_for_instrument_fastpath(instr_t *inst, fastpath_info_t *mi, bb_info_t *bi)
{
    uint opc = instr_get_opcode(inst);
    int i;
    initialize_fastpath_info(mi, bi, inst);
    if (!options.fastpath)
        return false;
    if (opc == OP_xlat) {
        /* can't use base-disp "%ds:(%ebx,%al,1)" for lea: would have to expand
         * to multiple instrs.  not worth supporting since pretty rare though I
         * do see 3K in twolf test on windows.
         */
        return false;
    }

    /* We assume that any one memory reference, even in a rep string form,
     * will only access one heap allocation.  Since we're taking the most
     * recent access to any part of a heap alloc we thus don't care about the
     * size of a memory reference.
     */
    for (i=0; i<instr_num_dsts(inst); i++) {
        if (opnd_uses_memory_we_track(instr_get_dst(inst, i))) {
            mi->store = true;
            if (!opnd_is_null(mi->dst[0].app)) {
                /* FIXME: we could handle 2 dsts if no srcs easily,
                 * and even more dsts if we really wanted to w/o too
                 * much trouble.  also something like pusha w/
                 * consecutive dsts is easy: just take first one.
                 */
                return false;
            }
            mi->dst[0].app = instr_get_dst(inst, i);
        }
    }
    for (i=0; i<instr_num_srcs(inst); i++) {
        if (opnd_uses_memory_we_track(instr_get_src(inst, i))) {
            if (mi->store)
                mi->mem2mem = true;
            else
                mi->load = true;
            if (!opnd_is_null(mi->src[0].app)) {
                /* see notes above about handling this: in particular cmps */
                return false;
            }
            mi->src[0].app = instr_get_src(inst, i);
        }
    }
    return true;
}
예제 #6
0
dr_emit_flags_t
memdump_bb_instrumentation(void *drcontext, void *tag, instrlist_t *bb,
instr_t *instr, bool for_trace, bool translating,
void *user_data)
{

	reg_id_t reg1 = DR_REG_XAX;
	reg_id_t reg2 = DR_REG_XBX;
	int i = 0;

	if(filter_bb_level_from_list(app_pc_head, instr)){

		dr_save_reg(drcontext, bb, instr, reg1, SPILL_SLOT_1);
		dr_save_reg(drcontext, bb, instr, reg2, SPILL_SLOT_2);
		
		dr_mutex_lock(mutex);
		DEBUG_PRINT("instrumenting %x pc\n", instr_get_app_pc(instr));

		instr_clones[instr_clone_amount] = instr_clone(drcontext, instr);

		for (i = 0; i < instr_num_srcs(instr); i++){
			if (opnd_is_memory_reference(instr_get_src(instr, i))) {
				drutil_insert_get_mem_addr(drcontext, bb, instr, instr_get_src(instr,i), reg1, reg2);
				dr_insert_clean_call(drcontext, bb, instr, clean_call_mem_information, false, 3, 
					OPND_CREATE_INTPTR(instr_clones[instr_clone_amount]), opnd_create_reg(reg1), OPND_CREATE_INTPTR(false));
			}
		}
		for (i = 0; i < instr_num_dsts(instr); i++){
			if (opnd_is_memory_reference(instr_get_dst(instr, i))) {
				drutil_insert_get_mem_addr(drcontext, bb, instr, instr_get_dst(instr, i), reg1, reg2);
				dr_insert_clean_call(drcontext, bb, instr, clean_call_mem_information, false, 3, 
					OPND_CREATE_INTPTR(instr_clones[instr_clone_amount]), opnd_create_reg(reg1), OPND_CREATE_INTPTR(true));
			}
		}
		

		instr_clone_amount++;

		dr_mutex_unlock(mutex);

		dr_restore_reg(drcontext, bb, instr, reg1, SPILL_SLOT_1);
		dr_restore_reg(drcontext, bb, instr, reg2, SPILL_SLOT_2);


	}

	return DR_EMIT_DEFAULT;
}
예제 #7
0
파일: rbuf.c 프로젝트: jikk/dbi_study
static dr_emit_flags_t
event_basic_block(void *drcontext, void *tag, instrlist_t *bb,
                  bool for_trace, bool translating)
{
	int i;
    instr_t *instr, *first = instrlist_first(bb);
    
    for (instr = first; instr != NULL; instr = instr_get_next(instr)) {
		if (instr_reads_memory(instr)) {
			for (i = 0; i < instr_num_srcs(instr); i++) {
				if (opnd_is_memory_reference(instr_get_src(instr, i))) {
					instrument_mem(drcontext, bb, instr, i, false);
				}
			}
		}
		if (instr_writes_memory(instr)) {
			for (i = 0; i < instr_num_dsts(instr); i++) {
				if (opnd_is_memory_reference(instr_get_dst(instr, i))) {
					instrument_mem(drcontext, bb, instr, i, true);
				}
			}
		}
    }
//	dr_printf("count %d\n",count);
    return DR_EMIT_DEFAULT;
}
예제 #8
0
파일: ir.c 프로젝트: Arunpreet/dynamorio
/* emits the instruction to buf (for tests that wish to do additional checks on
 * the output) */
static void
test_instr_encode_and_decode(void *dc, instr_t *instr, uint len_expect,
                             /* also checks one operand's size */
                             bool src, uint opnum, opnd_size_t sz, uint bytes)
{
    opnd_t op;
    opnd_size_t opsz;
    instr_t *decin;
    uint len;
    byte *pc = instr_encode(dc, instr, buf);
    len = (int) (pc - (byte *)buf);
#if VERBOSE
    disassemble_with_info(dc, buf, STDOUT, true, true);
#endif
    ASSERT(len == len_expect);
    decin = instr_create(dc);
    decode(dc, buf, decin);
    ASSERT(instr_same(instr, decin));

    /* PR 245805: variable sizes should be resolved on decode */
    if (src)
        op = instr_get_src(decin, opnum);
    else
        op = instr_get_dst(decin, opnum);
    opsz = opnd_get_size(op);
    ASSERT(opsz == sz && opnd_size_in_bytes(opsz) == bytes);

    instr_destroy(dc, instr);
    instr_destroy(dc, decin);
}
예제 #9
0
파일: staleness.c 프로젝트: steboe/drmemory
/* Called by slow_path() after initial decode.  Expected to free inst. */
bool
slow_path_for_staleness(void *drcontext, dr_mcontext_t *mc, instr_t *inst,
                        app_loc_t *loc)
{
    opnd_t opnd;
    int opc, i, num_srcs, num_dsts;
    uint sz;
    bool pushpop_stackop;

    opc = instr_get_opcode(inst);
    num_srcs = num_true_srcs(inst, mc);
    for (i = 0; i < num_srcs; i++) {
        opnd = instr_get_src(inst, i);
        if (opnd_is_memory_reference(opnd)) {
            opnd = adjust_memop(inst, opnd, false, &sz, &pushpop_stackop);
            check_mem_opnd_nouninit(opc, 0, loc, opnd, sz, mc);
        }
    }

    num_dsts = num_true_dsts(inst, mc);
    for (i = 0; i < num_dsts; i++) {
        opnd = instr_get_dst(inst, i);
        if (opnd_is_memory_reference(opnd)) {
            opnd = adjust_memop(inst, opnd, true, &sz, &pushpop_stackop);
            check_mem_opnd_nouninit(opc, 0, loc, opnd, sz, mc);
        }
    }

    instr_free(drcontext, inst);
    /* we're not sharing xl8 so no need to call slow_path_xl8_sharing */

    return true;
}
예제 #10
0
void memory_write(void *pc, void *prev_pc)
{
  void		*drcontext = dr_get_current_drcontext();
  instr_t	*instr = instr_create(drcontext);
  dr_mcontext_t mctx;
  opnd_t	dst;
  ctx_t		ctx;
  
  pc = dr_app_pc_for_decoding(pc);

  mctx.flags = DR_MC_CONTROL|DR_MC_INTEGER;
  mctx.size = sizeof(mctx);
  dr_get_mcontext(drcontext, &mctx);

  instr_init(drcontext, instr);
  if (!decode(drcontext, pc, instr))
    {
      dr_printf("Decode of instruction at %p failed\n", pc);
      return;
    }

  ctx.addr = prev_pc;
  ctx.dr_addr = prev_pc;

  for (int i = 0; i < instr_num_dsts(instr); i++)
    {
      dst = instr_get_dst(instr, i);
      check_opnd(dst, pc, 0, drcontext, &mctx, &ctx);
    }

  instr_destroy(drcontext, instr);
}
예제 #11
0
static
dr_emit_flags_t bb_event(void* drcontext, void *tag, instrlist_t* bb,
                         bool for_trace, bool translating)
{
    instr_t *instr;
    instr_t *next_instr;
    reg_t in_eax = -1;

    for (instr = instrlist_first(bb); instr != NULL; instr = next_instr) {
        next_instr = instr_get_next(instr);
        if (instr_get_opcode(instr) == OP_mov_imm &&
            opnd_get_reg(instr_get_dst(instr, 0)) == REG_EAX)
            in_eax = opnd_get_immed_int(instr_get_src(instr, 0));
        if (instr_is_syscall(instr) &&
            in_eax == SYS_getpid) {
            instr_t *myval = INSTR_CREATE_mov_imm
                (drcontext, opnd_create_reg(REG_EAX), OPND_CREATE_INT32(-7));
            instr_set_translation(myval, instr_get_app_pc(instr));
            instrlist_preinsert(bb, instr, myval);
            instrlist_remove(bb, instr);
            instr_destroy(drcontext, instr);
        }
    }
    return DR_EMIT_DEFAULT;
}
예제 #12
0
static void
instr_create_ldstex(dcontext_t *dcontext, int len, uint *pc, instr_t *instr,
                    OUT instr_t *instr_ldstex)
{
    int num_dsts = 0;
    int num_srcs = 0;
    int i, d, s, j;

    for (i = 0; i < len; i++) {
        ASSERT(instr[i].length == AARCH64_INSTR_SIZE &&
               instr[i].bytes == instr[0].bytes + AARCH64_INSTR_SIZE * i);
        num_dsts += instr_num_dsts(&instr[i]);
        num_srcs += instr_num_srcs(&instr[i]);
    }
    instr_set_opcode(instr_ldstex, OP_ldstex);
    instr_set_num_opnds(dcontext, instr_ldstex, num_dsts, num_srcs);
    d = 0;
    s = 0;
    for (i = 0; i < len; i++) {
        int dsts = instr_num_dsts(&instr[i]);
        int srcs = instr_num_srcs(&instr[i]);
        for (j = 0; j < dsts; j++)
            instr_set_dst(instr_ldstex, d++, instr_get_dst(&instr[i], j));
        for (j = 0; j < srcs; j++)
            instr_set_src(instr_ldstex, s++, instr_get_src(&instr[i], j));
    }
    ASSERT(d == num_dsts && s == num_srcs);
    /* Set raw bits to original encoding. */
    instr_set_raw_bits(instr_ldstex, instr[0].bytes, len * AARCH64_INSTR_SIZE);
    /* Conservatively assume all flags are read and written. */
    instr_ldstex->eflags = EFLAGS_READ_ALL | EFLAGS_WRITE_ALL;
    instr_set_eflags_valid(instr_ldstex, true);
}
예제 #13
0
파일: instr.c 프로젝트: djmott/dynamorio
bool
instr_is_mov_constant(instr_t *instr, ptr_int_t *value)
{
    int opc = instr_get_opcode(instr);
    if (opc == OP_eor) {
        /* We include OP_eor for symmetry w/ x86, but on ARM "mov reg, #0" is
         * just as compact and there's no reason to use an xor.
         */
        if (opnd_same(instr_get_src(instr, 0), instr_get_dst(instr, 0)) &&
            opnd_same(instr_get_src(instr, 0), instr_get_src(instr, 1)) &&
            /* Must be the form with "sh2, i5_7" and no shift */
            instr_num_srcs(instr) == 4 &&
            opnd_get_immed_int(instr_get_src(instr, 2)) == DR_SHIFT_NONE &&
            opnd_get_immed_int(instr_get_src(instr, 3)) == 0) {
            *value = 0;
            return true;
        } else
            return false;
    } else if (opc == OP_mvn || opc == OP_mvns) {
        opnd_t op = instr_get_src(instr, 0);
        if (opnd_is_immed_int(op)) {
            *value = -opnd_get_immed_int(op);
            return true;
        } else
            return false;
    } else if (opc == OP_mov || opc == OP_movs || opc == OP_movw) {
        opnd_t op = instr_get_src(instr, 0);
        if (opnd_is_immed_int(op)) {
            *value = opnd_get_immed_int(op);
            return true;
        } else
            return false;
    }
    return false;
}
예제 #14
0
static dr_emit_flags_t
bb_event(void* drcontext, void *tag, instrlist_t *bb, bool for_trace, bool translating)
{
    instr_t *instr, *next_instr;
    int opcode;
    for (instr = instrlist_first(bb); instr != NULL; instr = next_instr) {
        next_instr = instr_get_next(instr);
        opcode = instr_get_opcode(instr);
	if(instr_is_floating(instr)){
   	//	dr_fprintf(logF, "Has seen FPU instruction with opcode %d\n",opcode);
	
	}
	else if(is_SIMD_packed(opcode)){
   	//	dr_fprintf(logF, "Has seen SIMD packed instruction with opcode %d\n",opcode);
	}
//AVX?rcpps?

	else if(is_SIMD_arithm(opcode)){
		int is_single = 0;
//		printf("opcode is   %d\n", opcode);
//    		printf("number of sources  %d\n", instr_num_srcs(instr));  
 //   		printf("number of dests  %d\n", instr_num_dsts(instr));
		//assert(number of sources = 2);
		opnd_t source1 = instr_get_src(instr,0);
		opnd_t source2 = instr_get_src(instr,1);
		opnd_t dest = instr_get_dst(instr,0);
		if(opnd_is_memory_reference(source1)){
	//		dr_print_instr(drcontext, logF, instr, "INSTR: ");
//			dr_print_opnd(drcontext, logF, source1, "OPND1: ");
//			dr_print_opnd(drcontext, logF, source2, "OPND2: ");
			reg_id_t rd = opnd_get_reg(source2);
			reg_id_t rs = opnd_get_reg_used(source1, 0);
			dr_insert_clean_call(drcontext, bb, instr, 
				(void*) callback, true, 5, 
				OPND_CREATE_INTPTR(rs), OPND_CREATE_INTPTR(opnd_get_disp(source1)),
				OPND_CREATE_INTPTR(rd), OPND_CREATE_INTPTR(opcode), OPND_CREATE_INTPTR(instr_get_app_pc(instr)));

		}
		else if(opnd_is_reg(source1) && opnd_is_reg(source2)){
			reg_id_t reg1 = opnd_get_reg(source1);
			reg_id_t reg2 = opnd_get_reg(source2);
			dr_insert_clean_call(drcontext,bb,instr, (void*)getRegReg, 
				true, 4, 
				OPND_CREATE_INTPTR(reg1), OPND_CREATE_INTPTR(reg2)
				,OPND_CREATE_INTPTR(opcode), OPND_CREATE_INTPTR(instr_get_app_pc(instr))
			); 
		}
		else{
		//should not be the case, throw an exception
		}
	        fp_count++; 
      }
    }

    return DR_EMIT_DEFAULT;
}
예제 #15
0
/* For each memory reference app instr, we insert inline code to fill the buffer
 * with an instruction entry and memory reference entries.
 */
static dr_emit_flags_t
event_app_instruction(void *drcontext, void *tag, instrlist_t *bb, instr_t *instr,
                      bool for_trace, bool translating, void *user_data)
{
    int i;

    if (!instr_is_app(instr))
        return DR_EMIT_DEFAULT;
    if (!instr_reads_memory(instr) && !instr_writes_memory(instr))
        return DR_EMIT_DEFAULT;

    /* insert code to add an entry for app instruction */
    instrument_instr(drcontext, bb, instr);

    /* insert code to add an entry for each memory reference opnd */
    for (i = 0; i < instr_num_srcs(instr); i++) {
        if (opnd_is_memory_reference(instr_get_src(instr, i)))
            instrument_mem(drcontext, bb, instr, instr_get_src(instr, i), false);
    }

    for (i = 0; i < instr_num_dsts(instr); i++) {
        if (opnd_is_memory_reference(instr_get_dst(instr, i)))
            instrument_mem(drcontext, bb, instr, instr_get_dst(instr, i), true);
    }

    /* insert code to call clean_call for processing the buffer */
    if (/* XXX i#1698: there are constraints for code between ldrex/strex pairs,
         * so we minimize the instrumentation in between by skipping the clean call.
         * As we're only inserting instrumentation on a memory reference, and the
         * app should be avoiding memory accesses in between the ldrex...strex,
         * the only problematic point should be before the strex.
         * However, there is still a chance that the instrumentation code may clear the
         * exclusive monitor state.
         * Using a fault to handle a full buffer should be more robust, and the
         * forthcoming buffer filling API (i#513) will provide that.
         */
        IF_AARCHXX_ELSE(!instr_is_exclusive_store(instr), true))
        dr_insert_clean_call(drcontext, bb, instr, (void *)clean_call, false, 0);

    return DR_EMIT_DEFAULT;
}
예제 #16
0
static bool
instr_is_nonbranch_pcrel(instr_t *instr)
{
    int i, n;
    n = instr_num_dsts(instr);
    for (i = 0; i < n; i++)
        ASSERT(!OPND_IS_REL_ADDR(instr_get_dst(instr, i)));
    n = instr_num_srcs(instr);
    for (i = 0; i < n; i++) {
        if (OPND_IS_REL_ADDR(instr_get_src(instr, i)))
            return true;
    }
    return false;
}
예제 #17
0
/* event_bb_insert calls instrument_mem to instrument every
 * application memory reference.
 */
dr_emit_flags_t
memtrace_bb_instrumentation(void *drcontext, void *tag, instrlist_t *bb,
                instr_t *instr, bool for_trace, bool translating,
                void *user_data)
{
    int i;
	reg_id_t reg;
	file_t out_file;
	instr_t * first = NULL;
	instr_t * current;
 
	//DR_ASSERT(instr_ok_to_mangle(instr));

	if (instr_ok_to_mangle(instr)){
		/* FIXME - need to generalize the filtering library */



		for (current = instrlist_first(bb); current != NULL; current = instr_get_next(current)){
			if (instr_ok_to_mangle(current)){
				first = current;
				break;
			}
		}


		if ((first != NULL) && filter_from_list(head, first, client_arg->filter_mode)){


			if (instr_reads_memory(instr)) {
				for (i = 0; i < instr_num_srcs(instr); i++) {
					if (opnd_is_memory_reference(instr_get_src(instr, i))) {
						instrument_mem(drcontext, bb, instr, i, false);
					}
				}
			}
			if (instr_writes_memory(instr)) {
				for (i = 0; i < instr_num_dsts(instr); i++) {
					if (opnd_is_memory_reference(instr_get_dst(instr, i))) {
						instrument_mem(drcontext, bb, instr, i, true);
					}
				}
			}

		}
	}

    return DR_EMIT_DEFAULT;
}
예제 #18
0
static void
handle_post_write(void *drcontext, instrlist_t *ilist, instr_t *where, reg_id_t reg_addr)
{
    int i;
    instr_t *prev_instr = instr_get_prev_app(where);
    bool seen_memref = false;

    /* XXX: We assume that no write instruction has multiple distinct memory destinations.
     * This way we are able to persist a single register across an app instruction. Note
     * there are instructions which currently do break this assumption, but we punt on
     * this.
     */
    for (i = 0; i < instr_num_dsts(prev_instr); ++i) {
        if (opnd_is_memory_reference(instr_get_dst(prev_instr, i))) {
            if (seen_memref) {
                DR_ASSERT_MSG(false, "Found inst with multiple memory destinations");
                break;
            }
            seen_memref = true;
            instrument_post_write(drcontext, ilist, where, instr_get_dst(prev_instr, i),
                                  prev_instr, reg_addr);
        }
    }
}
예제 #19
0
파일: staleness.c 프로젝트: steboe/drmemory
bool
instr_uses_memory_we_track(instr_t *inst)
{
    int i;
    ASSERT(options.staleness, "should not be called");
    if (instr_get_opcode(inst) == OP_lea) /* not a real mem access */
        return false;
    for (i = 0; i < instr_num_srcs(inst); i++) {
        if (opnd_uses_memory_we_track(instr_get_src(inst, i)))
            return true;
    }
    for (i = 0; i < instr_num_dsts(inst); i++) {
        if (opnd_uses_memory_we_track(instr_get_dst(inst, i)))
            return true;
    }
    return false;
}
예제 #20
0
파일: optimize.c 프로젝트: zhaoqin/Umbra
static bool
instr_is_reg_restore(instr_t *instr, reg_id_t reg, umbra_info_t *info)
{
    opnd_t opnd;
    int    slot;

    if (instr_get_opcode(instr) != OP_mov_ld)
        return false;
    opnd = instr_get_dst(instr, 0);
    if (!opnd_is_reg(opnd) || opnd_get_reg(opnd) != reg)
        return false;
    slot = reg - REG_SPILL_START;
    opnd = OPND_CREATE_ABSMEM(&info->spill_regs[slot], OPSZ_PTR);
    if (opnd_same(opnd, instr_get_src(instr, 0)))
        return true;
    return false;
}
예제 #21
0
void
modify_instr_for_relocations(void *drcontext, instr_t *inst,
                             ptr_uint_t *immed, ptr_uint_t *disp)
{
    int i;
    ptr_uint_t limmed = 0, ldisp = 0;
    for (i = instr_num_srcs(inst) - 1; i >= 0; i--) {
        opnd_t opnd = instr_get_src(inst, i);
        if (opnd_is_immed_int(opnd) && opnd_get_immed_int(opnd) > 0x10000) {
            if (limmed != 0) {
                ASSERT(false);
            } else {
                limmed = opnd_get_immed_int(opnd);
            }
            instr_set_src(inst, i, opnd_create_immed_int(0, opnd_get_size(opnd)));
        }
        if (opnd_is_base_disp(opnd) && opnd_get_disp(opnd) > 0x10000) {
            if (ldisp != 0 && ldisp != opnd_get_disp(opnd)) {
                ASSERT(false);
            } else {
                ldisp = opnd_get_disp(opnd);
            }
            instr_set_src(inst, i, opnd_create_base_disp(opnd_get_base(opnd), opnd_get_index(opnd), opnd_get_scale(opnd), 0, opnd_get_size(opnd)));
        }
    }
    for (i = instr_num_dsts(inst) - 1; i >= 0; i--) {
        opnd_t opnd = instr_get_dst(inst, i);
        ASSERT(!opnd_is_immed(opnd));
        if (opnd_is_base_disp(opnd) && opnd_get_disp(opnd) > 0x10000) {
            if (ldisp != 0 && ldisp != opnd_get_disp(opnd)) {
                ASSERT(false);
            } else {
                ldisp = opnd_get_disp(opnd);
            }
            instr_set_dst(inst, i, opnd_create_base_disp(opnd_get_base(opnd), opnd_get_index(opnd), opnd_get_scale(opnd), 0, opnd_get_size(opnd)));
        }
    }
    if (limmed != 0)
        *immed = limmed;
    if (ldisp != 0)
        *disp = ldisp; 
}
예제 #22
0
파일: optimize.c 프로젝트: zhaoqin/Umbra
static bool
reg_update_is_limited(instr_t *instr, reg_id_t reg)
{
    int opcode;
    int offset;

    opcode = instr_get_opcode(instr);
    if (opcode == OP_inc || opcode == OP_dec)
        return true;
    if (opcode == OP_and) 
        /* for 0xffffffd0 & reg => reg */
        return true;

    if ((opcode == OP_add || opcode == OP_sub || 
         opcode == OP_adc || opcode == OP_sbb) &&
        opnd_is_immed_int(instr_get_src(instr, 0))) {
        offset = opnd_get_immed_int(instr_get_src(instr, 0));
        if (offset > PAGE_SIZE || offset < -PAGE_SIZE)
            return false;
        return true;
    }
    if (reg != DR_REG_XSP)
        return false;

    if (opcode >= OP_push && opcode <= OP_popa) {
        if (opcode == OP_pop && opnd_same(instr_get_dst(instr, 0),
                                          opnd_create_reg(DR_REG_XSP)))
            return false;
        return true;
    }
    if (opcode >= OP_call && opcode <= OP_call_far_ind)
        return true;
    if (opcode == OP_ret || opcode == OP_ret_far ||
        opcode == OP_enter || opcode == OP_leave ||
        opcode == OP_pushf || opcode == OP_popf)
        return true;
    return false;
}
예제 #23
0
static uint calculate_operands(instr_t * instr,uint dst_or_src){

	opnd_t op;
	int i;
	int ret = 0;

	if(dst_or_src == DST_TYPE){
		for(i=0; i<instr_num_dsts(instr); i++){
			op = instr_get_dst(instr,i);

			if(opnd_is_immed(op) ||
				opnd_is_memory_reference(op) ||
				opnd_is_reg(op)){
				ret++;
			}
		}
	}
	else if(dst_or_src == SRC_TYPE){
		for(i=0; i<instr_num_srcs(instr); i++){
			op = instr_get_src(instr,i);

			if (instr_get_opcode(instr) == OP_lea && opnd_is_base_disp(op)){
				ret += 4;

			}
			else if (opnd_is_immed(op) ||
				opnd_is_memory_reference(op) ||
				opnd_is_reg(op)){
				ret++;
			}

		}
	}

	return ret;

}
예제 #24
0
/* event_bb_insert calls instrument_mem to instrument every
 * application memory reference.
 */
static dr_emit_flags_t
event_bb_insert(void *drcontext, void *tag, instrlist_t *bb,
                instr_t *instr, bool for_trace, bool translating,
                void *user_data)
{
    int i;
    if (instr_get_app_pc(instr) == NULL)
        return DR_EMIT_DEFAULT;
    if (instr_reads_memory(instr)) {
        for (i = 0; i < instr_num_srcs(instr); i++) {
            if (opnd_is_memory_reference(instr_get_src(instr, i))) {
                instrument_mem(drcontext, bb, instr, i, false);
            }
        }
    }
    if (instr_writes_memory(instr)) {
        for (i = 0; i < instr_num_dsts(instr); i++) {
            if (opnd_is_memory_reference(instr_get_dst(instr, i))) {
                instrument_mem(drcontext, bb, instr, i, true);
            }
        }
    }
    return DR_EMIT_DEFAULT;
}
예제 #25
0
/* prints the trace and empties the instruction buffer */
static void ins_trace(void *drcontext)
{
    per_thread_t *data;
    int num_refs;
	instr_trace_t *instr_trace;
	instr_t * instr;
	int i;
	int j;
#ifdef READABLE_TRACE
	char disassembly[SHORT_STRING_LENGTH];
#else
	output_t * output;
#endif

    data      = drmgr_get_tls_field(drcontext, tls_index);
    instr_trace   = (instr_trace_t *)data->buf_base;
    num_refs  = (int)((instr_trace_t *)data->buf_ptr - instr_trace);

	uint mem_type;
	uint64 mem_addr;

	opnd_t opnd;

	
#ifdef READABLE_TRACE
	//TODO
    for (i = 0; i < num_refs; i++) {

		instr = instr_trace->static_info_instr;
		instr_disassemble_to_buffer(drcontext,instr,disassembly,SHORT_STRING_LENGTH);

		dr_fprintf(data->outfile,"%u",instr_get_opcode(instr));

		dr_fprintf(data->outfile,",%u",calculate_operands(instr,DST_TYPE));
		for(j=0; j<instr_num_dsts(instr); j++){
			get_address(instr_trace, j, DST_TYPE, &mem_type, &mem_addr);
			output_populator_printer(drcontext,instr_get_dst(instr,j),instr,mem_addr,mem_type,NULL);
		}

		dr_fprintf(data->outfile,",%u",calculate_operands(instr,SRC_TYPE));
		for(j=0; j<instr_num_srcs(instr); j++){
			get_address(instr_trace, j, SRC_TYPE, &mem_type, &mem_addr);
			opnd = instr_get_src(instr, j);
			if (instr_get_opcode(instr) == OP_lea && opnd_is_base_disp(opnd)){
				/* four operands here for [base + index * scale + disp] */
				output_populator_printer(drcontext, opnd_create_reg(opnd_get_base(opnd)), instr, mem_addr, mem_type, NULL);
				output_populator_printer(drcontext, opnd_create_reg(opnd_get_index(opnd)), instr, mem_addr, mem_type, NULL);
				output_populator_printer(drcontext, opnd_create_immed_int(opnd_get_scale(opnd),OPSZ_PTR), instr, mem_addr, mem_type, NULL);
				output_populator_printer(drcontext, opnd_create_immed_int(opnd_get_disp(opnd), OPSZ_PTR), instr, mem_addr, mem_type, NULL);
			}
			else{
				output_populator_printer(drcontext, opnd, instr, mem_addr, mem_type, NULL);
			}
		}
		dr_fprintf(data->outfile,",%u,%u\n",instr_trace->eflags,instr_trace->pc);
        ++instr_trace;
    }
#else

	/* we need to fill up the output array here */

	for(i = 0; i< num_refs; i++){
		instr = instr_trace->static_info_instr;
		output = &data->output_array[i];
		
		//opcode 
		output->opcode = instr_get_opcode(instr);
		output->num_dsts = 0;
		output->num_srcs = 0;

		for(j=0; j<instr_num_dsts(instr); j++){

			output_populator_printer(drcontext,instr_get_dst(instr,j),instr,get_address(instr_trace,j,DST_TYPE),&output->dsts[output->num_dsts]);
			output->num_dsts++;
		}

		for(j=0; j<instr_num_srcs(instr); j++){
			output_populator_printer(drcontext,instr_get_src(instr,j),instr,get_address(instr_trace,j,SRC_TYPE),&output->srcs[output->num_srcs]);
			output->num_srcs++;
		}
		
		output->eflags = instr_trace->eflags;

		++instr_trace;

	}

	dr_write_file(data->outfile,data->output_array,num_refs * sizeof(output_t));
#endif

	
    memset(data->buf_base, 0, INSTR_BUF_SIZE);
    data->num_refs += num_refs;
    data->buf_ptr   = data->buf_base;
	
}
예제 #26
0
static void dynamic_info_instrumentation(void *drcontext, instrlist_t *ilist, instr_t *where,
               instr_t * static_info)
{


	/* 
		issues that may arise
		1. pc and eflags is uint but in 64 bit mode 8 byte transfers are done -> so far no problem (need to see this)
			need to see whether there is a better way
		2. double check all the printing
	*/

	/*
		this function does the acutal instrumentation

		arguments - 

		we get a filled pointer here about the operand types for a given instruction (srcs and dests)
		1) increment the pointer to the instr_trace buffers
		2) add this pointer to instr_trace_t wrapper
		3) check whether any of the srcs and dests have memory operations; if so add a lea instruction and get the dynamic address
			Add this address to instr_trace_t structure
		4) if the buffer is full call a function to dump it to the file and restore the head ptr of the buffer 
			(lean function is used utilizing a code cache to limit code bloat needed for a clean call before every instruction.)
	*/

    instr_t *instr, *call, *restore, *first, *second;
    opnd_t   ref, opnd1, opnd2;
    reg_id_t reg1 = DR_REG_XBX; /* We can optimize it by picking dead reg */
    reg_id_t reg2 = DR_REG_XCX; /* reg2 must be ECX or RCX for jecxz */
	reg_id_t reg3 = DR_REG_XAX;
    per_thread_t *data;
    uint pc;
	uint i;

	module_data_t * module_data;

	if (client_arg->instrace_mode == DISASSEMBLY_TRACE){
		dr_insert_clean_call(drcontext, ilist, where, clean_call_disassembly_trace, false, 0);
		return;
	}

    data = drmgr_get_tls_field(drcontext, tls_index);

    /* Steal the register for memory reference address *
     * We can optimize away the unnecessary register save and restore
     * by analyzing the code and finding the register is dead.
     */

    dr_save_reg(drcontext, ilist, where, reg1, SPILL_SLOT_2);
    dr_save_reg(drcontext, ilist, where, reg2, SPILL_SLOT_3);
	dr_save_reg(drcontext, ilist, where, reg3, SPILL_SLOT_4);

	
	drmgr_insert_read_tls_field(drcontext, tls_index, ilist, where, reg2);

    /* Load data->buf_ptr into reg2 */
    opnd1 = opnd_create_reg(reg2);
    opnd2 = OPND_CREATE_MEMPTR(reg2, offsetof(per_thread_t, buf_ptr));
    instr = INSTR_CREATE_mov_ld(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);


	/* buf_ptr->static_info_instr = static_info; */
    /* Move static_info to static_info_instr field of buf (which is a instr_trace_t *) */
    opnd1 = OPND_CREATE_MEMPTR(reg2, offsetof(instr_trace_t, static_info_instr));
	instrlist_insert_mov_immed_ptrsz(drcontext, (ptr_int_t)static_info, opnd1, ilist, where, &first, &second);

	/* buf_ptr->num_mem = 0; */
    opnd1 = OPND_CREATE_MEMPTR(reg2, offsetof(instr_trace_t, num_mem));
    
	instrlist_insert_mov_immed_ptrsz(drcontext, (ptr_int_t)0, opnd1, ilist, where, &first, &second);

	for (i = 0; i<instr_num_dsts(where); i++){
		if (opnd_is_memory_reference(instr_get_dst(where, i))){
			ref = instr_get_dst(where, i);

			DR_ASSERT(opnd_is_null(ref) == false);


			dr_restore_reg(drcontext, ilist, where, reg1, SPILL_SLOT_2);
			dr_restore_reg(drcontext, ilist, where, reg2, SPILL_SLOT_3);

#ifdef DEBUG_MEM_REGS
			dr_insert_clean_call(drcontext, ilist, where, clean_call_disassembly_trace, false, 0);
			dr_insert_clean_call(drcontext, ilist, where, clean_call_print_regvalues, false, 0);
#endif
			
			drutil_insert_get_mem_addr(drcontext, ilist, where, ref, reg1, reg2);

#ifdef DEBUG_MEM_REGS
			dr_insert_clean_call(drcontext, ilist, where, clean_call_print_regvalues, false, 0);
#endif

#ifdef DEBUG_MEM_STATS
			dr_insert_clean_call(drcontext, ilist, where, clean_call_disassembly_trace, false, 0);
			dr_insert_clean_call(drcontext, ilist, where, clean_call_mem_stats, false, 1, opnd_create_reg(reg1));
#endif

			dr_insert_clean_call(drcontext, ilist, where, clean_call_populate_mem, false, 3, opnd_create_reg(reg1), OPND_CREATE_INT32(i), OPND_CREATE_INT32(DST_TYPE));

		}
	}

	for (i = 0; i<instr_num_srcs(where); i++){
		if (opnd_is_memory_reference(instr_get_src(where, i))){
			ref = instr_get_src(where, i);

			DR_ASSERT(opnd_is_null(ref) == false);			
			
			dr_restore_reg(drcontext, ilist, where, reg1, SPILL_SLOT_2);
			dr_restore_reg(drcontext, ilist, where, reg2, SPILL_SLOT_3);

#ifdef DEBUG_MEM_REGS
			dr_insert_clean_call(drcontext, ilist, where, clean_call_disassembly_trace, false, 0);
			dr_insert_clean_call(drcontext, ilist, where, clean_call_print_regvalues, false, 0);
#endif

			drutil_insert_get_mem_addr(drcontext, ilist, where, ref, reg1, reg2);

#ifdef DEBUG_MEM_REGS

			dr_insert_clean_call(drcontext, ilist, where, clean_call_print_regvalues, false, 0);
#endif

#ifdef DEBUG_MEM_STATS
			dr_insert_clean_call(drcontext, ilist, where, clean_call_disassembly_trace, false, 0);
			dr_insert_clean_call(drcontext, ilist, where, clean_call_mem_stats, false, 1, opnd_create_reg(reg1));
#endif

			dr_insert_clean_call(drcontext, ilist, where, clean_call_populate_mem, false, 3, opnd_create_reg(reg1), OPND_CREATE_INT32(i), OPND_CREATE_INT32(SRC_TYPE));

		}
	}
	

	

	drmgr_insert_read_tls_field(drcontext, tls_index, ilist, where, reg2);
    /* Load data->buf_ptr into reg2 */
    opnd1 = opnd_create_reg(reg2);
    opnd2 = OPND_CREATE_MEMPTR(reg2, offsetof(per_thread_t, buf_ptr));
    instr = INSTR_CREATE_mov_ld(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

	/* arithmetic flags are saved here for buf_ptr->eflags filling */
	dr_save_arith_flags_to_xax(drcontext, ilist, where);

	/* load the eflags */
	opnd1 = OPND_CREATE_MEMPTR(reg2, offsetof(instr_trace_t, eflags));
	opnd2 = opnd_create_reg(reg3);
    instr = INSTR_CREATE_mov_st(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);


	/* load the app_pc */
	opnd1 = OPND_CREATE_MEMPTR(reg2, offsetof(instr_trace_t, pc));
	module_data = dr_lookup_module(instr_get_app_pc(where));

	//dynamically generated code - module information not available - then just store 0 at the pc slot of the instr_trace data
	if (module_data != NULL){
		pc = instr_get_app_pc(where) - module_data->start;
		dr_free_module_data(module_data);
	}
	else{
		pc = 0;
	}

	instrlist_insert_mov_immed_ptrsz(drcontext, (ptr_int_t)pc, opnd1, ilist, where, &first, &second);



	/* buf_ptr++; */
    /* Increment reg value by pointer size using lea instr */
    opnd1 = opnd_create_reg(reg2);
    opnd2 = opnd_create_base_disp(reg2, DR_REG_NULL, 0,
                                  sizeof(instr_trace_t),
                                  OPSZ_lea);
    instr = INSTR_CREATE_lea(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* Update the data->buf_ptr */
    drmgr_insert_read_tls_field(drcontext, tls_index, ilist, where, reg1);
    opnd1 = OPND_CREATE_MEMPTR(reg1, offsetof(per_thread_t, buf_ptr));
    opnd2 = opnd_create_reg(reg2);
    instr = INSTR_CREATE_mov_st(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* we use lea + jecxz trick for better performance
     * lea and jecxz won't disturb the eflags, so we won't insert
     * code to save and restore application's eflags.
     */
    /* lea [reg2 - buf_end] => reg2 */
    opnd1 = opnd_create_reg(reg1);
    opnd2 = OPND_CREATE_MEMPTR(reg1, offsetof(per_thread_t, buf_end));
    instr = INSTR_CREATE_mov_ld(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);
    opnd1 = opnd_create_reg(reg2);
    opnd2 = opnd_create_base_disp(reg1, reg2, 1, 0, OPSZ_lea);
    instr = INSTR_CREATE_lea(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* jecxz call */
    call  = INSTR_CREATE_label(drcontext);
    opnd1 = opnd_create_instr(call);
    instr = INSTR_CREATE_jecxz(drcontext, opnd1);
    instrlist_meta_preinsert(ilist, where, instr);

    /* jump restore to skip clean call */
    restore = INSTR_CREATE_label(drcontext);
    opnd1 = opnd_create_instr(restore);
    instr = INSTR_CREATE_jmp(drcontext, opnd1);
    instrlist_meta_preinsert(ilist, where, instr);

    /* clean call */
    /* We jump to lean procedure which performs full context switch and
     * clean call invocation. This is to reduce the code cache size.
     */
    instrlist_meta_preinsert(ilist, where, call);
    /* mov restore DR_REG_XCX */
    opnd1 = opnd_create_reg(reg2);
    /* this is the return address for jumping back from lean procedure */
    opnd2 = opnd_create_instr(restore);
    /* We could use instrlist_insert_mov_instr_addr(), but with a register
     * destination we know we can use a 64-bit immediate.
     */
    instr = INSTR_CREATE_mov_imm(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);
    /* jmp code_cache */
    opnd1 = opnd_create_pc(code_cache);
    instr = INSTR_CREATE_jmp(drcontext, opnd1);
    instrlist_meta_preinsert(ilist, where, instr);

    /* restore %reg */
    instrlist_meta_preinsert(ilist, where, restore);

	//dr_restore_arith_flags_from_xax(drcontext, ilist, where);
    dr_restore_reg(drcontext, ilist, where, reg1, SPILL_SLOT_2);
    dr_restore_reg(drcontext, ilist, where, reg2, SPILL_SLOT_3);
	dr_restore_reg(drcontext, ilist, where, reg3, SPILL_SLOT_4);

	//instrlist_disassemble(drcontext, instr_get_app_pc(instrlist_first(ilist)), ilist, logfile);

}
예제 #27
0
파일: rbuf.c 프로젝트: jikk/dbi_study
static void
instrument_mem(void *drcontext, instrlist_t *ilist, instr_t *where, 
               int pos, bool write)
{
    instr_t *instr;
    opnd_t   ref, opnd1, opnd2;
    reg_id_t reg1 = DR_REG_XAX; /* We can optimize it by picking dead reg */
    reg_id_t reg2 = DR_REG_XCX; /* reg2 must be ECX or RCX for jecxz */

    if (write)
       ref = instr_get_dst(where, pos);
    else
       ref = instr_get_src(where, pos);

    dr_save_reg(drcontext, ilist, where, reg1, SPILL_SLOT_2);
    dr_save_reg(drcontext, ilist, where, reg2, SPILL_SLOT_3);

	// reg2 = RBufIdx
    opnd1 = opnd_create_reg(reg2);
    opnd2 = OPND_CREATE_ABSMEM((byte *)&RBufIdx, OPSZ_4);
    instr = INSTR_CREATE_mov_ld(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);
	// save flags since we are using inc, and
	dr_save_arith_flags_to_xax(drcontext, ilist, where);	

	// reg2 = reg2 & RBUF_SIZE 
    opnd1 = opnd_create_reg(reg2);
    opnd2 = OPND_CREATE_INT32(RBUF_SIZE);
    instr = INSTR_CREATE_and(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);
	dr_restore_arith_flags_from_xax(drcontext, ilist, where);

	// reg1 = &RBuf
    opnd1 = opnd_create_reg(reg1);
    opnd2 = OPND_CREATE_INTPTR(RBuf);
    instr = INSTR_CREATE_mov_imm(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

	// reg1 = reg1 + reg2 * sizeof(uint)
	// 		= RBuf + RBufIdx * sizeof(uint)
	// 		= RBuf[RBufIdx]
    opnd1 = opnd_create_reg(reg1);
    opnd2 = opnd_create_base_disp(reg1, reg2, sizeof(uint), 0, OPSZ_lea);
    instr = INSTR_CREATE_lea(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

	// RBuf[RBufIdx].addr = addr;
    opnd1 = OPND_CREATE_MEMPTR(reg1, 0);
    drutil_insert_get_mem_addr(drcontext, ilist, where, ref, reg2, reg1);
    opnd2 = opnd_create_reg(reg2);
    instr = INSTR_CREATE_mov_st(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

	dr_save_arith_flags_to_xax(drcontext, ilist, where);	

	// reg2 = RBufIdx
    opnd1 = opnd_create_reg(reg2);
    opnd2 = OPND_CREATE_ABSMEM((byte *)&RBufIdx, OPSZ_4);
    instr = INSTR_CREATE_mov_ld(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

	// reg2 = reg2 + 1
    opnd1 = opnd_create_reg(reg2);
    instr = INSTR_CREATE_inc(drcontext, opnd1);
    instrlist_meta_preinsert(ilist, where, instr);

	// RBufIdx = reg2
    opnd1 = OPND_CREATE_ABSMEM((byte *)&RBufIdx, OPSZ_4);
    opnd2 = opnd_create_reg(reg2);
    instr = INSTR_CREATE_mov_st(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

	dr_restore_arith_flags_from_xax(drcontext, ilist, where);

    dr_restore_reg(drcontext, ilist, where, reg1, SPILL_SLOT_2);
    dr_restore_reg(drcontext, ilist, where, reg2, SPILL_SLOT_3);
}
예제 #28
0
/*
 * instrument_mem is called whenever a memory reference is identified.
 * It inserts code before the memory reference to to fill the memory buffer
 * and jump to our own code cache to call the clean_call when the buffer is full.
 */
static void
instrument_mem(void *drcontext, instrlist_t *ilist, instr_t *where,
               int pos, bool write)
{
    instr_t *instr, *call, *restore, *first, *second;
    opnd_t   ref, opnd1, opnd2;
    reg_id_t reg1 = DR_REG_XBX; /* We can optimize it by picking dead reg */
    reg_id_t reg2 = DR_REG_XCX; /* reg2 must be ECX or RCX for jecxz */
    per_thread_t *data;
    app_pc pc;

    data = drmgr_get_tls_field(drcontext, tls_index);

    /* Steal the register for memory reference address *
     * We can optimize away the unnecessary register save and restore
     * by analyzing the code and finding the register is dead.
     */
    dr_save_reg(drcontext, ilist, where, reg1, SPILL_SLOT_2);
    dr_save_reg(drcontext, ilist, where, reg2, SPILL_SLOT_3);

    if (write)
       ref = instr_get_dst(where, pos);
    else
       ref = instr_get_src(where, pos);

    /* use drutil to get mem address */
    drutil_insert_get_mem_addr(drcontext, ilist, where, ref, reg1, reg2);

    /* The following assembly performs the following instructions
     * buf_ptr->write = write;
     * buf_ptr->addr  = addr;
     * buf_ptr->size  = size;
     * buf_ptr->pc    = pc;
     * buf_ptr++;
     * if (buf_ptr >= buf_end_ptr)
     *    clean_call();
     */
    drmgr_insert_read_tls_field(drcontext, tls_index, ilist, where, reg2);
    /* Load data->buf_ptr into reg2 */
    opnd1 = opnd_create_reg(reg2);
    opnd2 = OPND_CREATE_MEMPTR(reg2, offsetof(per_thread_t, buf_ptr));
    instr = INSTR_CREATE_mov_ld(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* Move write/read to write field */
    opnd1 = OPND_CREATE_MEM32(reg2, offsetof(mem_ref_t, write));
    opnd2 = OPND_CREATE_INT32(write);
    instr = INSTR_CREATE_mov_imm(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* Store address in memory ref */
    opnd1 = OPND_CREATE_MEMPTR(reg2, offsetof(mem_ref_t, addr));
    opnd2 = opnd_create_reg(reg1);
    instr = INSTR_CREATE_mov_st(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* Store size in memory ref */
    opnd1 = OPND_CREATE_MEMPTR(reg2, offsetof(mem_ref_t, size));
    /* drutil_opnd_mem_size_in_bytes handles OP_enter */
    opnd2 = OPND_CREATE_INT32(drutil_opnd_mem_size_in_bytes(ref, where));
    instr = INSTR_CREATE_mov_st(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* Store pc in memory ref */
    pc = instr_get_app_pc(where);
    /* For 64-bit, we can't use a 64-bit immediate so we split pc into two halves.
     * We could alternatively load it into reg1 and then store reg1.
     * We use a convenience routine that does the two-step store for us.
     */
    opnd1 = OPND_CREATE_MEMPTR(reg2, offsetof(mem_ref_t, pc));
    instrlist_insert_mov_immed_ptrsz(drcontext, (ptr_int_t) pc, opnd1,
                                     ilist, where, &first, &second);
    instr_set_ok_to_mangle(first, false/*meta*/);
    if (second != NULL)
        instr_set_ok_to_mangle(second, false/*meta*/);

    /* Increment reg value by pointer size using lea instr */
    opnd1 = opnd_create_reg(reg2);
    opnd2 = opnd_create_base_disp(reg2, DR_REG_NULL, 0,
                                  sizeof(mem_ref_t),
                                  OPSZ_lea);
    instr = INSTR_CREATE_lea(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* Update the data->buf_ptr */
    drmgr_insert_read_tls_field(drcontext, tls_index, ilist, where, reg1);
    opnd1 = OPND_CREATE_MEMPTR(reg1, offsetof(per_thread_t, buf_ptr));
    opnd2 = opnd_create_reg(reg2);
    instr = INSTR_CREATE_mov_st(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* we use lea + jecxz trick for better performance
     * lea and jecxz won't disturb the eflags, so we won't insert
     * code to save and restore application's eflags.
     */
    /* lea [reg2 - buf_end] => reg2 */
    opnd1 = opnd_create_reg(reg1);
    opnd2 = OPND_CREATE_MEMPTR(reg1, offsetof(per_thread_t, buf_end));
    instr = INSTR_CREATE_mov_ld(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);
    opnd1 = opnd_create_reg(reg2);
    opnd2 = opnd_create_base_disp(reg1, reg2, 1, 0, OPSZ_lea);
    instr = INSTR_CREATE_lea(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);

    /* jecxz call */
    call  = INSTR_CREATE_label(drcontext);
    opnd1 = opnd_create_instr(call);
    instr = INSTR_CREATE_jecxz(drcontext, opnd1);
    instrlist_meta_preinsert(ilist, where, instr);

    /* jump restore to skip clean call */
    restore = INSTR_CREATE_label(drcontext);
    opnd1 = opnd_create_instr(restore);
    instr = INSTR_CREATE_jmp(drcontext, opnd1);
    instrlist_meta_preinsert(ilist, where, instr);

    /* clean call */
    /* We jump to lean procedure which performs full context switch and
     * clean call invocation. This is to reduce the code cache size.
     */
    instrlist_meta_preinsert(ilist, where, call);
    /* mov restore DR_REG_XCX */
    opnd1 = opnd_create_reg(reg2);
    /* this is the return address for jumping back from lean procedure */
    opnd2 = opnd_create_instr(restore);
    /* We could use instrlist_insert_mov_instr_addr(), but with a register
     * destination we know we can use a 64-bit immediate.
     */
    instr = INSTR_CREATE_mov_imm(drcontext, opnd1, opnd2);
    instrlist_meta_preinsert(ilist, where, instr);
    /* jmp code_cache */
    opnd1 = opnd_create_pc(code_cache);
    instr = INSTR_CREATE_jmp(drcontext, opnd1);
    instrlist_meta_preinsert(ilist, where, instr);

    /* restore %reg */
    instrlist_meta_preinsert(ilist, where, restore);
    dr_restore_reg(drcontext, ilist, where, reg1, SPILL_SLOT_2);
    dr_restore_reg(drcontext, ilist, where, reg2, SPILL_SLOT_3);
}
예제 #29
0
파일: instr.c 프로젝트: djmott/dynamorio
bool
instr_is_jump_mem(instr_t *instr)
{
    return instr_get_opcode(instr) == OP_ldr &&
        opnd_get_reg(instr_get_dst(instr, 0)) == DR_REG_PC;
}
예제 #30
0
/* replaces inc with add 1, dec with sub 1 
 * returns true if successful, false if not
 */
static bool
replace_inc_with_add(void *drcontext, instr_t *instr, instrlist_t *trace)
{
    instr_t *in;
    uint eflags;
    int opcode = instr_get_opcode(instr);
    bool ok_to_replace = false;

    DR_ASSERT(opcode == OP_inc || opcode == OP_dec);
#ifdef VERBOSE
    dr_print_instr(drcontext, STDOUT, instr, "in replace_inc_with_add:\n\t");
#endif

    /* add/sub writes CF, inc/dec does not, make sure that's ok */
    for (in = instr; in != NULL; in = instr_get_next(in)) {
	eflags = instr_get_eflags(in);
	if ((eflags & EFLAGS_READ_CF) != 0) {
#ifdef VERBOSE
            dr_print_instr(drcontext, STDOUT, in,
                           "\treads CF => cannot replace inc with add: ");
#endif
	    return false;
	}
	if (instr_is_exit_cti(in)) {
	    /* to be more sophisticated, examine instructions at
	     * target of exit cti (if it is a direct branch).
	     * for this example, we give up if we hit a branch.
	     */
	    return false;
	}
	/* if writes but doesn't read, ok */
	if ((eflags & EFLAGS_WRITE_CF) != 0) {
	    ok_to_replace = true;
	    break;
	}
    }
    if (!ok_to_replace) {
#ifdef VERBOSE
        dr_printf("\tno write to CF => cannot replace inc with add\n");
#endif
	return false;
    }
    if (opcode == OP_inc) {
#ifdef VERBOSE
        dr_printf("\treplacing inc with add\n");
#endif
	in = INSTR_CREATE_add(drcontext, instr_get_dst(instr, 0),
			      OPND_CREATE_INT8(1));
    } else {
#ifdef VERBOSE
        dr_printf("\treplacing dec with sub\n");
#endif
	in = INSTR_CREATE_sub(drcontext, instr_get_dst(instr, 0),
			      OPND_CREATE_INT8(1));
    }
    if (instr_get_prefix_flag(instr, PREFIX_LOCK))
        instr_set_prefix_flag(in, PREFIX_LOCK);
    instr_set_translation(in, instr_get_app_pc(instr));
    instrlist_replace(trace, instr, in);
    instr_destroy(drcontext, instr);
    return true;
}