/*
* Send initial GSS authentication token
*/
static int
pg_GSS_startup(PGconn *conn, int payloadlen)
{
OM_uint32 maj_stat,
min_stat;
int maxlen;
gss_buffer_desc temp_gbuf;
char *host = PQhost(conn);
if (!(host && host[0] != '\0'))
{
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("host name must be specified\n"));
return STATUS_ERROR;
}
if (conn->gctx)
{
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("duplicate GSS authentication request\n"));
return STATUS_ERROR;
}
/*
* Import service principal name so the proper ticket can be acquired by
* the GSSAPI system.
*/
maxlen = NI_MAXHOST + strlen(conn->krbsrvname) + 2;
temp_gbuf.value = (char *) malloc(maxlen);
if (!temp_gbuf.value)
{
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("out of memory\n"));
return STATUS_ERROR;
}
snprintf(temp_gbuf.value, maxlen, "%s@%s",
conn->krbsrvname, host);
temp_gbuf.length = strlen(temp_gbuf.value);
maj_stat = gss_import_name(&min_stat, &temp_gbuf,
GSS_C_NT_HOSTBASED_SERVICE, &conn->gtarg_nam);
free(temp_gbuf.value);
if (maj_stat != GSS_S_COMPLETE)
{
pg_GSS_error(libpq_gettext("GSSAPI name import error"),
conn,
maj_stat, min_stat);
return STATUS_ERROR;
}
/*
* Initial packet is the same as a continuation packet with no initial
* context.
*/
conn->gctx = GSS_C_NO_CONTEXT;
return pg_GSS_continue(conn, payloadlen);
}
/*
* pg_fe_sendauth
* client demux routine for outgoing authentication information
*/
int
pg_fe_sendauth(AuthRequest areq, PGconn *conn)
{
switch (areq)
{
case AUTH_REQ_OK:
break;
case AUTH_REQ_KRB4:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Kerberos 4 authentication not supported\n"));
return STATUS_ERROR;
case AUTH_REQ_KRB5:
#ifdef KRB5
pglock_thread();
if (pg_krb5_sendauth(conn) != STATUS_OK)
{
/* Error message already filled in */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
break;
#else
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Kerberos 5 authentication not supported\n"));
return STATUS_ERROR;
#endif
#if defined(ENABLE_GSS) || defined(ENABLE_SSPI)
case AUTH_REQ_GSS:
{
int r;
pglock_thread();
/*
* If we have both GSS and SSPI support compiled in, use SSPI
* support by default. This is overridable by a connection
* string parameter. Note that when using SSPI we still leave
* the negotiate parameter off, since we want SSPI to use the
* GSSAPI kerberos protocol. For actual SSPI negotiate
* protocol, we use AUTH_REQ_SSPI.
*/
#if defined(ENABLE_GSS) && defined(ENABLE_SSPI)
if (conn->gsslib && (pg_strcasecmp(conn->gsslib, "gssapi") == 0))
r = pg_GSS_startup(conn);
else
r = pg_SSPI_startup(conn, 0);
#elif defined(ENABLE_GSS) && !defined(ENABLE_SSPI)
r = pg_GSS_startup(conn);
#elif !defined(ENABLE_GSS) && defined(ENABLE_SSPI)
r = pg_SSPI_startup(conn, 0);
#endif
if (r != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
}
break;
case AUTH_REQ_GSS_CONT:
{
int r;
pglock_thread();
#if defined(ENABLE_GSS) && defined(ENABLE_SSPI)
if (conn->usesspi)
r = pg_SSPI_continue(conn);
else
r = pg_GSS_continue(conn);
#elif defined(ENABLE_GSS) && !defined(ENABLE_SSPI)
r = pg_GSS_continue(conn);
#elif !defined(ENABLE_GSS) && defined(ENABLE_SSPI)
r = pg_SSPI_continue(conn);
#endif
if (r != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
}
break;
#else
case AUTH_REQ_GSS:
case AUTH_REQ_GSS_CONT:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("GSSAPI authentication not supported\n"));
return STATUS_ERROR;
#endif
#ifdef ENABLE_SSPI
case AUTH_REQ_SSPI:
/*
* SSPI has it's own startup message so libpq can decide which
* method to use. Indicate to pg_SSPI_startup that we want SSPI
* negotiation instead of Kerberos.
*/
pglock_thread();
if (pg_SSPI_startup(conn, 1) != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
break;
#else
case AUTH_REQ_SSPI:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("SSPI authentication not supported\n"));
return STATUS_ERROR;
#endif
case AUTH_REQ_CRYPT:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Crypt authentication not supported\n"));
return STATUS_ERROR;
case AUTH_REQ_MD5:
case AUTH_REQ_PASSWORD:
conn->password_needed = true;
if (conn->pgpass == NULL || conn->pgpass[0] == '\0')
{
printfPQExpBuffer(&conn->errorMessage,
PQnoPasswordSupplied);
return STATUS_ERROR;
}
if (pg_password_sendauth(conn, conn->pgpass, areq) != STATUS_OK)
{
printfPQExpBuffer(&conn->errorMessage,
"fe_sendauth: error sending password authentication\n");
return STATUS_ERROR;
}
break;
case AUTH_REQ_SCM_CREDS:
if (pg_local_sendauth(conn) != STATUS_OK)
return STATUS_ERROR;
break;
default:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("authentication method %u not supported\n"), areq);
return STATUS_ERROR;
}
return STATUS_OK;
}
/*
* pg_fe_sendauth
* client demux routine for outgoing authentication information
*/
int
pg_fe_sendauth(AuthRequest areq, PGconn *conn)
{
switch (areq)
{
case AUTH_REQ_OK:
break;
case AUTH_REQ_KRB4:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Kerberos 4 authentication not supported\n"));
return STATUS_ERROR;
case AUTH_REQ_KRB5:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Kerberos 5 authentication not supported\n"));
return STATUS_ERROR;
#if defined(ENABLE_GSS) || defined(ENABLE_SSPI)
case AUTH_REQ_GSS:
#if !defined(ENABLE_SSPI)
/* no native SSPI, so use GSSAPI library for it */
case AUTH_REQ_SSPI:
#endif
{
int r;
pglock_thread();
/*
* If we have both GSS and SSPI support compiled in, use SSPI
* support by default. This is overridable by a connection
* string parameter. Note that when using SSPI we still leave
* the negotiate parameter off, since we want SSPI to use the
* GSSAPI kerberos protocol. For actual SSPI negotiate
* protocol, we use AUTH_REQ_SSPI.
*/
#if defined(ENABLE_GSS) && defined(ENABLE_SSPI)
if (conn->gsslib && (pg_strcasecmp(conn->gsslib, "gssapi") == 0))
r = pg_GSS_startup(conn);
else
r = pg_SSPI_startup(conn, 0);
#elif defined(ENABLE_GSS) && !defined(ENABLE_SSPI)
r = pg_GSS_startup(conn);
#elif !defined(ENABLE_GSS) && defined(ENABLE_SSPI)
r = pg_SSPI_startup(conn, 0);
#endif
if (r != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
}
break;
case AUTH_REQ_GSS_CONT:
{
int r;
pglock_thread();
#if defined(ENABLE_GSS) && defined(ENABLE_SSPI)
if (conn->usesspi)
r = pg_SSPI_continue(conn);
else
r = pg_GSS_continue(conn);
#elif defined(ENABLE_GSS) && !defined(ENABLE_SSPI)
r = pg_GSS_continue(conn);
#elif !defined(ENABLE_GSS) && defined(ENABLE_SSPI)
r = pg_SSPI_continue(conn);
#endif
if (r != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
}
break;
#else /* defined(ENABLE_GSS) || defined(ENABLE_SSPI) */
/* No GSSAPI *or* SSPI support */
case AUTH_REQ_GSS:
case AUTH_REQ_GSS_CONT:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("GSSAPI authentication not supported\n"));
return STATUS_ERROR;
#endif /* defined(ENABLE_GSS) || defined(ENABLE_SSPI) */
#ifdef ENABLE_SSPI
case AUTH_REQ_SSPI:
/*
* SSPI has it's own startup message so libpq can decide which
* method to use. Indicate to pg_SSPI_startup that we want SSPI
* negotiation instead of Kerberos.
*/
pglock_thread();
if (pg_SSPI_startup(conn, 1) != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
break;
#else
/*
* No SSPI support. However, if we have GSSAPI but not SSPI
* support, AUTH_REQ_SSPI will have been handled in the codepath
* for AUTH_REQ_GSSAPI above, so don't duplicate the case label in
* that case.
*/
#if !defined(ENABLE_GSS)
case AUTH_REQ_SSPI:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("SSPI authentication not supported\n"));
return STATUS_ERROR;
#endif /* !define(ENABLE_GSSAPI) */
#endif /* ENABLE_SSPI */
case AUTH_REQ_CRYPT:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Crypt authentication not supported\n"));
return STATUS_ERROR;
case AUTH_REQ_MD5:
case AUTH_REQ_PASSWORD:
{
char *password = conn->connhost[conn->whichhost].password;
if (password == NULL)
password = conn->pgpass;
conn->password_needed = true;
if (password == NULL || password[0] == '\0')
{
printfPQExpBuffer(&conn->errorMessage,
PQnoPasswordSupplied);
return STATUS_ERROR;
}
if (pg_password_sendauth(conn, password, areq) != STATUS_OK)
{
printfPQExpBuffer(&conn->errorMessage,
"fe_sendauth: error sending password authentication\n");
return STATUS_ERROR;
}
break;
}
case AUTH_REQ_SCM_CREDS:
if (pg_local_sendauth(conn) != STATUS_OK)
return STATUS_ERROR;
break;
default:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("authentication method %u not supported\n"), areq);
return STATUS_ERROR;
}
return STATUS_OK;
}