/*
* ssl_method_error - Check whether an SSL_METHOD is enabled.
*
* @s: The SSL handle for the candidate method
* @method: the intended method.
*
* Returns 0 on success, or an SSL error reason on failure.
*/
static int ssl_method_error(const SSL *s, const SSL_METHOD *method)
{
int version = method->version;
if ((s->min_proto_version != 0 &&
version_cmp(s, version, s->min_proto_version) < 0) ||
ssl_security(s, SSL_SECOP_VERSION, 0, version, NULL) == 0)
return SSL_R_VERSION_TOO_LOW;
if (s->max_proto_version != 0 &&
version_cmp(s, version, s->max_proto_version) > 0)
return SSL_R_VERSION_TOO_HIGH;
if ((s->options & method->mask) != 0)
return SSL_R_UNSUPPORTED_PROTOCOL;
if ((method->flags & SSL_METHOD_NO_SUITEB) != 0 && tls1_suiteb(s))
return SSL_R_AT_LEAST_TLS_1_2_NEEDED_IN_SUITEB_MODE;
else if ((method->flags & SSL_METHOD_NO_FIPS) != 0 && FIPS_mode())
return SSL_R_AT_LEAST_TLS_1_0_NEEDED_IN_FIPS_MODE;
return 0;
}
int ssl23_get_client_hello(SSL *s)
{
char buf_space[11]; /* Request this many bytes in initial read.
* We can detect SSL 3.0/TLS 1.0 Client Hellos
* ('type == 3') correctly only when the following
* is in a single record, which is not guaranteed by
* the protocol specification:
* Byte Content
* 0 type \
* 1/2 version > record header
* 3/4 length /
* 5 msg_type \
* 6-8 length > Client Hello message
* 9/10 client_version /
*/
char *buf= &(buf_space[0]);
unsigned char *p,*d,*d_len,*dd;
unsigned int i;
unsigned int csl,sil,cl;
int n=0,j;
int type=0;
int v[2];
if (s->state == SSL23_ST_SR_CLNT_HELLO_A)
{
/* read the initial header */
v[0]=v[1]=0;
if (!ssl3_setup_buffers(s)) goto err;
n=ssl23_read_bytes(s, sizeof buf_space);
if (n != sizeof buf_space) return(n); /* n == -1 || n == 0 */
p=s->packet;
memcpy(buf,p,n);
if ((p[0] & 0x80) && (p[2] == SSL2_MT_CLIENT_HELLO))
{
/*
* SSLv2 header
*/
if ((p[3] == 0x00) && (p[4] == 0x02))
{
v[0]=p[3]; v[1]=p[4];
/* SSLv2 */
}
else if (p[3] == SSL3_VERSION_MAJOR)
{
v[0]=p[3]; v[1]=p[4];
/* SSLv3/TLSv1 */
if (p[4] >= TLS1_VERSION_MINOR)
{
if (p[4] >= TLS1_2_VERSION_MINOR &&
!(s->options & SSL_OP_NO_TLSv1_2))
{
s->version=TLS1_2_VERSION;
s->state=SSL23_ST_SR_CLNT_HELLO_B;
}
else if (p[4] >= TLS1_1_VERSION_MINOR &&
!(s->options & SSL_OP_NO_TLSv1_1))
{
s->version=TLS1_1_VERSION;
/* type=2; */ /* done later to survive restarts */
s->state=SSL23_ST_SR_CLNT_HELLO_B;
}
else if (!(s->options & SSL_OP_NO_TLSv1))
{
s->version=TLS1_VERSION;
/* type=2; */ /* done later to survive restarts */
s->state=SSL23_ST_SR_CLNT_HELLO_B;
}
else if (!(s->options & SSL_OP_NO_SSLv3))
{
s->version=SSL3_VERSION;
/* type=2; */
s->state=SSL23_ST_SR_CLNT_HELLO_B;
}
}
else if (!(s->options & SSL_OP_NO_SSLv3))
{
s->version=SSL3_VERSION;
/* type=2; */
s->state=SSL23_ST_SR_CLNT_HELLO_B;
}
}
}
else if ((p[0] == SSL3_RT_HANDSHAKE) &&
(p[1] == SSL3_VERSION_MAJOR) &&
(p[5] == SSL3_MT_CLIENT_HELLO) &&
((p[3] == 0 && p[4] < 5 /* silly record length? */)
|| (p[9] >= p[1])))
{
/*
* SSLv3 or tls1 header
*/
v[0]=p[1]; /* major version (= SSL3_VERSION_MAJOR) */
/* We must look at client_version inside the Client Hello message
* to get the correct minor version.
* However if we have only a pathologically small fragment of the
* Client Hello message, this would be difficult, and we'd have
* to read more records to find out.
* No known SSL 3.0 client fragments ClientHello like this,
* so we simply reject such connections to avoid
* protocol version downgrade attacks. */
if (p[3] == 0 && p[4] < 6)
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_TOO_SMALL);
goto err;
}
/* if major version number > 3 set minor to a value
* which will use the highest version 3 we support.
* If TLS 2.0 ever appears we will need to revise
* this....
*/
if (p[9] > SSL3_VERSION_MAJOR)
v[1]=0xff;
else
v[1]=p[10]; /* minor version according to client_version */
if (v[1] >= TLS1_VERSION_MINOR)
{
if (v[1] >= TLS1_2_VERSION_MINOR &&
!(s->options & SSL_OP_NO_TLSv1_2))
{
s->version=TLS1_2_VERSION;
type=3;
}
else if (v[1] >= TLS1_1_VERSION_MINOR &&
!(s->options & SSL_OP_NO_TLSv1_1))
{
s->version=TLS1_1_VERSION;
type=3;
}
else if (!(s->options & SSL_OP_NO_TLSv1))
{
s->version=TLS1_VERSION;
type=3;
}
else if (!(s->options & SSL_OP_NO_SSLv3))
{
s->version=SSL3_VERSION;
type=3;
}
}
else
{
/* client requests SSL 3.0 */
if (!(s->options & SSL_OP_NO_SSLv3))
{
s->version=SSL3_VERSION;
type=3;
}
else if (!(s->options & SSL_OP_NO_TLSv1))
{
/* we won't be able to use TLS of course,
* but this will send an appropriate alert */
s->version=TLS1_VERSION;
type=3;
}
}
}
else if ((strncmp("GET ", (char *)p,4) == 0) ||
(strncmp("POST ",(char *)p,5) == 0) ||
(strncmp("HEAD ",(char *)p,5) == 0) ||
(strncmp("PUT ", (char *)p,4) == 0))
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_HTTP_REQUEST);
goto err;
}
else if (strncmp("CONNECT",(char *)p,7) == 0)
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_HTTPS_PROXY_REQUEST);
goto err;
}
}
/* ensure that TLS_MAX_VERSION is up-to-date */
OPENSSL_assert(s->version <= TLS_MAX_VERSION);
if (s->version < TLS1_2_VERSION && tls1_suiteb(s))
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,
SSL_R_ONLY_TLS_1_2_ALLOWED_IN_SUITEB_MODE);
goto err;
}
if (FIPS_mode() && (s->version < TLS1_VERSION))
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,
SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE);
goto err;
}
if (!ssl_security(s, SSL_SECOP_VERSION, 0, s->version, NULL))
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_VERSION_TOO_LOW);
goto err;
}
if (s->state == SSL23_ST_SR_CLNT_HELLO_B)
{
/* we have SSLv3/TLSv1 in an SSLv2 header
* (other cases skip this state) */
type=2;
p=s->packet;
v[0] = p[3]; /* == SSL3_VERSION_MAJOR */
v[1] = p[4];
/* An SSLv3/TLSv1 backwards-compatible CLIENT-HELLO in an SSLv2
* header is sent directly on the wire, not wrapped as a TLS
* record. It's format is:
* Byte Content
* 0-1 msg_length
* 2 msg_type
* 3-4 version
* 5-6 cipher_spec_length
* 7-8 session_id_length
* 9-10 challenge_length
* ... ...
*/
n=((p[0]&0x7f)<<8)|p[1];
if (n > (1024*4))
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_TOO_LARGE);
goto err;
}
if (n < 9)
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_LENGTH_MISMATCH);
goto err;
}
j=ssl23_read_bytes(s,n+2);
/* We previously read 11 bytes, so if j > 0, we must have
* j == n+2 == s->packet_length. We have at least 11 valid
* packet bytes. */
if (j <= 0) return(j);
ssl3_finish_mac(s, s->packet+2, s->packet_length-2);
if (s->msg_callback)
s->msg_callback(0, SSL2_VERSION, 0, s->packet+2, s->packet_length-2, s, s->msg_callback_arg); /* CLIENT-HELLO */
p=s->packet;
p+=5;
n2s(p,csl);
n2s(p,sil);
n2s(p,cl);
d=(unsigned char *)s->init_buf->data;
if ((csl+sil+cl+11) != s->packet_length) /* We can't have TLS extensions in SSL 2.0 format
* Client Hello, can we? Error condition should be
* '>' otherweise */
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_LENGTH_MISMATCH);
goto err;
}
/* record header: msg_type ... */
*(d++) = SSL3_MT_CLIENT_HELLO;
/* ... and length (actual value will be written later) */
d_len = d;
d += 3;
/* client_version */
*(d++) = SSL3_VERSION_MAJOR; /* == v[0] */
*(d++) = v[1];
/* lets populate the random area */
/* get the challenge_length */
i=(cl > SSL3_RANDOM_SIZE)?SSL3_RANDOM_SIZE:cl;
memset(d,0,SSL3_RANDOM_SIZE);
memcpy(&(d[SSL3_RANDOM_SIZE-i]),&(p[csl+sil]),i);
d+=SSL3_RANDOM_SIZE;
/* no session-id reuse */
*(d++)=0;
/* ciphers */
j=0;
dd=d;
d+=2;
for (i=0; i<csl; i+=3)
{
if (p[i] != 0) continue;
*(d++)=p[i+1];
*(d++)=p[i+2];
j+=2;
}
s2n(j,dd);
/* COMPRESSION */
*(d++)=1;
*(d++)=0;
#if 0
/* copy any remaining data with may be extensions */
p = p+csl+sil+cl;
while (p < s->packet+s->packet_length)
{
*(d++)=*(p++);
}
#endif
i = (d-(unsigned char *)s->init_buf->data) - 4;
l2n3((long)i, d_len);
/* get the data reused from the init_buf */
s->s3->tmp.reuse_message=1;
s->s3->tmp.message_type=SSL3_MT_CLIENT_HELLO;
s->s3->tmp.message_size=i;
}
/* imaginary new state (for program structure): */
/* s->state = SSL23_SR_CLNT_HELLO_C */
if ((type == 2) || (type == 3))
{
/* we have SSLv3/TLSv1 (type 2: SSL2 style, type 3: SSL3/TLS style) */
const SSL_METHOD *new_method;
new_method = ssl23_get_server_method(s->version);
if (new_method == NULL)
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_UNSUPPORTED_PROTOCOL);
goto err;
}
s->method = new_method;
if (!ssl_init_wbio_buffer(s,1)) goto err;
/* we are in this state */
s->state=SSL3_ST_SR_CLNT_HELLO_A;
if (type == 3)
{
/* put the 'n' bytes we have read into the input buffer
* for SSLv3 */
s->rstate=SSL_ST_READ_HEADER;
s->packet_length=n;
if (s->s3->rbuf.buf == NULL)
if (!ssl3_setup_read_buffer(s))
goto err;
s->packet= &(s->s3->rbuf.buf[0]);
memcpy(s->packet,buf,n);
s->s3->rbuf.left=n;
s->s3->rbuf.offset=0;
}
else
{
s->packet_length=0;
s->s3->rbuf.left=0;
s->s3->rbuf.offset=0;
}
#if 0 /* ssl3_get_client_hello does this */
s->client_version=(v[0]<<8)|v[1];
#endif
s->handshake_func=s->method->ssl_accept;
}
else
{
/* bad, very bad */
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_UNKNOWN_PROTOCOL);
goto err;
}
s->init_num=0;
if (buf != buf_space) OPENSSL_free(buf);
return(SSL_accept(s));
err:
if (buf != buf_space) OPENSSL_free(buf);
return(-1);
}
int ssl_allow_compression(SSL *s)
{
if (s->options & SSL_OP_NO_COMPRESSION)
return 0;
return ssl_security(s, SSL_SECOP_COMPRESSION, 0, 0, NULL);
}
static int ssl23_get_server_hello(SSL *s)
{
unsigned char buf[8];
unsigned char *p;
int i;
int n;
n = ssl23_read_bytes(s, 7);
if (n != 7)
return (n);
p = RECORD_LAYER_get_packet(&s->rlayer);
memcpy(buf, p, n);
if (p[1] == SSL3_VERSION_MAJOR &&
p[2] <= TLS1_2_VERSION_MINOR &&
((p[0] == SSL3_RT_HANDSHAKE && p[5] == SSL3_MT_SERVER_HELLO) ||
(p[0] == SSL3_RT_ALERT && p[3] == 0 && p[4] == 2))) {
/* we have sslv3 or tls1 (server hello or alert) */
#ifndef OPENSSL_NO_SSL3
if ((p[2] == SSL3_VERSION_MINOR) && !(s->options & SSL_OP_NO_SSLv3)) {
if (FIPS_mode()) {
SSLerr(SSL_F_SSL23_GET_SERVER_HELLO,
SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE);
goto err;
}
s->version = SSL3_VERSION;
s->method = SSLv3_client_method();
} else
#endif
if ((p[2] == TLS1_VERSION_MINOR) && !(s->options & SSL_OP_NO_TLSv1)) {
s->version = TLS1_VERSION;
s->method = TLSv1_client_method();
} else if ((p[2] == TLS1_1_VERSION_MINOR) &&
!(s->options & SSL_OP_NO_TLSv1_1)) {
s->version = TLS1_1_VERSION;
s->method = TLSv1_1_client_method();
} else if ((p[2] == TLS1_2_VERSION_MINOR) &&
!(s->options & SSL_OP_NO_TLSv1_2)) {
s->version = TLS1_2_VERSION;
s->method = TLSv1_2_client_method();
} else {
SSLerr(SSL_F_SSL23_GET_SERVER_HELLO, SSL_R_UNSUPPORTED_PROTOCOL);
goto err;
}
/* ensure that TLS_MAX_VERSION is up-to-date */
OPENSSL_assert(s->version <= TLS_MAX_VERSION);
if (!ssl_security(s, SSL_SECOP_VERSION, 0, s->version, NULL)) {
SSLerr(SSL_F_SSL23_GET_SERVER_HELLO, SSL_R_VERSION_TOO_LOW);
goto err;
}
if (p[0] == SSL3_RT_ALERT && p[5] != SSL3_AL_WARNING) {
/* fatal alert */
void (*cb) (const SSL *ssl, int type, int val) = NULL;
int j;
if (s->info_callback != NULL)
cb = s->info_callback;
else if (s->ctx->info_callback != NULL)
cb = s->ctx->info_callback;
i = p[5];
if (cb != NULL) {
j = (i << 8) | p[6];
cb(s, SSL_CB_READ_ALERT, j);
}
if (s->msg_callback) {
s->msg_callback(0, s->version, SSL3_RT_HEADER, p, 5, s,
s->msg_callback_arg);
s->msg_callback(0, s->version, SSL3_RT_ALERT, p + 5, 2, s,
s->msg_callback_arg);
}
s->rwstate = SSL_NOTHING;
SSLerr(SSL_F_SSL23_GET_SERVER_HELLO, SSL_AD_REASON_OFFSET + p[6]);
goto err;
}
if (!ssl_init_wbio_buffer(s, 1))
goto err;
/* we are in this state */
s->state = SSL3_ST_CR_SRVR_HELLO_A;
/*
* put the 7 bytes we have read into the input buffer for SSLv3
*/
if (!RECORD_LAYER_set_data(&s->rlayer, buf, n))
goto err;
s->handshake_func = s->method->ssl_connect;
} else {
SSLerr(SSL_F_SSL23_GET_SERVER_HELLO, SSL_R_UNKNOWN_PROTOCOL);
goto err;
}
s->init_num = 0;
/*
* Since, if we are sending a ssl23 client hello, we are not reusing a
* session-id
*/
if (!ssl_get_new_session(s, 0))
goto err;
return (SSL_connect(s));
err:
return (-1);
}